Used Chiron Fz22L for sale (108)

Condition: ready for operation (used), Year of construction: 2018, travel distance X-axis: 630 mm, travel distance Y-axis: 530 mm, travel distance Z-axis: 450 mm, controller manufacturer: SIEMENS, controller model: 840D solution line, number of axes: 3, This 4-axis CHIRON DZ18W was manufactured in 2018. Ideal for precision vertical machining, this model offers robust construction and reliable performance. Consider the opportunity to buy this CHIRON DZ18W vertical machining centre. Contact us for more information. Additional equipment • OPTIONAL: robot, entire cell including conveyor belts, PLC, turning station Machine Benefits Technical Machine Benefits • Tool positions: 2x35 • Tool length max: 380 mm Extra Information Splash guard panel with fully enclosed work area/ with loading door, electrically protected/ including replaceable safety windows/ Work area partition with stainless steel louvres/ Height 2340 mm above floor, including machine light/ Mini control panel with start and reset button for M61/M62 pallet organization/ Integrated workpiece changing device IWW 0/180°/ for optimal chip flow with center partition made of sheet steel/ Workpiece changing time approx. 3.5 seconds, weight-dependent, self-regulating/ thanks to self-learning speed control./ Transport load per side 0 - max. 250 kg/ Max. 120 kg weight difference between the two table sides./ Each table side is prepared for the installation of a rotary table package./ Distance between spindle mount and swivel center/point /WW minimum 75 mm/ Travel paths: X-axis 630 mm/ Y-axis 530 mm/ Z-axis 450 mm/ Tank flushing system with coolant connection/ NC rotary table, type ATU 200/ Integrated into the integrated workpiece changing device IWW 0/180°/ With hydraulic clamping, holding torque 1,200 Nm,/ Repeatability +5" with/ faceplate © 225 mm, with centering® 60 -0.008,/ Counter bearing with hydraulic clamping, holding torque 800 Nm./ On the rotary table and counter bearing side. Swivel radius 285 mm/ 7th or 5th NC axis, plug-in ready/ Regulated pneumatic connection for sealing air/ Controlled hydraulic connection for clamping./ Rotary feedthrough 2 x 5-way/ Rotary table side: 4 x hydraulic/pneumatic, 1 x Pneumatics/ 4 x hydraulic/pneumatic on the counter bearing side, 1 x pneumatic/ Working area - rotary table assignment/ AF1 Rotary table ATU 200/ AF2 Rotary table ATU 200/ Double-spindle headstock/ Prepared to accommodate 2 main spindle motors with spindles/ Spindle distance in X-axis 400 mm/ Main spindle drive with 2 AC motors/ Pjdpfx Ahjx D Nmfjvspp Air-operated, with tool clamp monitoring/ 11.0 kW at 100% duty cycle/ 25.3 kW at 15% duty cycle/ Speed up to 12,000 rpm/ Max. torque 140 Nm/ Drilling capacity 2 x 42 mm/ in steel E355/ Automatic tool changer/ with robust, fully encapsulated pick-up chain magazine/ 2 x 35 tool positions/ HSK-A 63 DIN tool shank 69893/ Tool width max. 78 mm/ Tool width with free adjacent positions max. 140 mm/ Tool length max. 380 mm/ Tool weight max. 8.0 kg (max. magazine load 240 kg)/ Tool change time approx. 0.9 s (control system dependent)/ Soan-to-chip time approx. 2.2 s (control system dependent)/ Feed drive for X, Y, and Z axes/ Digital drives with direct position measuring systems, overpressure application/ Rapid traverse speed 75 - 75 - 75 m/min/ Axis acceleration 1.0 - 1.4 - 1.6 g/ SIEMENS CNC control 840D solution line/ incl. 10.4" TFT color screen / full keyboard / operator panel OP010S/ 1280 1 (TCU / NCU 720.3, 1 channel)/ User interface Operate/ NC RAM 3 MB (max. 1 MB available)/ (max. 200 programs available)/ for running part programs according to DIN 66025/ CF card with 8 GB storage capacity (max. 3 GB available)/ Power display, operating hours and workpiece counter on the screen,

Condition: ready for operation (used), Year of construction: 2019, operating hours: 13,572 h, travel distance X-axis: 800 mm, travel distance Y-axis: 530 mm, travel distance Z-axis: 450 mm, controller manufacturer: FANUC, controller model: 31i-B5, spindle speed (max.): 12,000 rpm, spindle motor power: 22,000 W, tool weight: 8,000 g, number of axes: 5, This 5-axis CHIRON FZ18W was manufactured in 2019, featuring a FANUC 31i-B5 control system and continuous 5-axis control. It boasts a spindle speed of up to 12,000 rpm, a tool capacity of 70, and rapid traverse rates of 75 m/min. Ideal for complex machining tasks with its automatic pallet changer and dual rotary tables. If you are looking to get high-quality milling capabilities consider the CHIRON FZ18W machine we have for sale. Contact us for more information. • Number of axes: 5 (X, Y, Z + 2 rotary axes via pallet/rotary table) • Spindle: • AC spindle motor: 7.5 kW (100% duty), 22.0 kW (10% duty) • Max torque: 140 Nm • Taper: HSK-A63 (DIN 69893) • Drilling capacity: Ø 42 mm • Tapping capacity: M30 • Milling capacity: 500 cm³/min (steel E355) • Tool changer: • Type: Fully enclosed chain magazine • Capacity: 70 tools • Max tool Ø: 78 mm (160 mm with free adjacent positions) • Max tool length: 380 mm • Max magazine load: 240 kg • Tool change time: ~0.9 s • Chip-to-chip time: ~2.6 s • Feed rates & dynamics: • Rapid traverse (X/Y/Z): 75 m/min • Acceleration: 0.6 – 1.2 – 1.4 g • Drives: Direct digital drives with absolute measuring system • Machine functions/utilities: • Automatic washdown of work area and fixtures • Automatic centralized grease lubrication • Hydraulic unit: 200 bar • Compressed air treatment with filtration to 0.01 µm • Cooling unit for machine components • Measuring, monitoring, software: • FANUC 3D collision control • Tool monitoring and sister tool management • Electrical & interfaces: • Ethernet RJ45, USB, PCMCIA • Remote diagnostics: CHIRON remoteLine • Data monitoring & OEE: CHIRON dataLine • Compliance: CE Additional equipment (robots, automation, peripherals) • Automation/palletizing: • Automatic pallet changer IWV 0°/180° (change time ~3.5 s) • Rotary table ATU 200, 2 units • Positioning accuracy/repeatability: ±5″ • Max clamping torque: 1,200 Nm • Max load per side (APC): 250 kg • Max weight difference between pallets: 0 kg • Coolant and chip management: • Through-spindle coolant (predisposition) • High-pressure coolant system up to 30 bar • Coolant filtration: Drum filter TPF 350 S (50 µm) • Chip conveyor: Hinged belt • Coolant tank: 230 L • Pump: 250 L/min @ 1.4 bar • Probing/tool control: • Renishaw RLP40Q probe (predisposition) • Laser tool breakage control (Single F1000) Ppjdpfsyaz Emox Ahvep

Condition: ready for operation (used), Year of construction: 2004, travel distance X-axis: 6,000 mm, travel distance Y-axis: 630 mm, travel distance Z-axis: 550 mm, controller manufacturer: SIEMENS, controller model: n/a, number of axes: 4, This 3-axis CHIRON Mill 6000 SK was manufactured in 2004, featuring a high-speed motor spindle at 12,000 rpm and a travel range of X 6,000 mm, Y 630 mm, Z 550 mm. It includes a 5-axis milling package, 92 tool positions, and a Marposs collision monitoring system. Ideal for long part machining up to 6,000 mm and pendulum machining. If you are looking to get high-quality milling capabilities consider the CHIRON Mill 6000 SK machine we have for sale. Contact us for more information. Machine Benefits Technical Machine Benefits • 92 tool positions hsk-a63 (background magazine) • Long part machining up to a maximum of 6000 mm • Machining of the end face (5th side) horizontally with swivel head (right/left) • Pendulum machining via center partition, max. Workpiece length 1773 mm with sk machining on both end faces (tool length 120 mm) • 4 hydraulic double vices (fixed center jaw) per pendulum section, positioning, and clamping via linear system (hydraulic release, mechanical clamping) Extra Information Pjdpfx Ahsx Nr Irsvjpp Additional Equipment High-speed package with Motor Spindle: 12000 rpm, 140 Nm Production Package: Scraper belt conveyor, discharge height 1050 mm Internal coolant preparation KNOLL VRF250 vacuum rotary filter (suitable for steel, cast iron, aluminum, plastic, brass) High pressure 70 bar with HP pump and variable valve Flushing gun per pendulum field Emulsion mist extraction, 2 fans each 800 m²/h Rotating viewing window left and right (1400 mm from machine center) Automatic loading doors Center partition for pendulum machining 5-Axis Milling Package Air Blast Tool Life Monitoring Additional V24 RS232 in the control cabinet BDE/MDE interface (statuses: machine on, machine running, part counter) Marposs (Brankamp) CMS100 Collision Monitoring System 3D machine model for kinematic simulation in the CAM programming system 210 bar hydraulic power unit, 2 clamping circuits, separate system clamping pressure for each pendulum field, clamping pressure control KOHN linear clamping system 8 KOHN Multi 2000 MFS 125/680 HD hydraulic vices Two-part operator step across the entire operating width of 6000 mm With the 3 axes x, y, z and the swivel head, the software package 5-axis milling can be used to mill shapes, e.g. a curve. The software then synchronizes the axes.

Condition: ready for operation (used), Year of construction: 2012, operating hours: 29,801 h, travel distance X-axis: 729 mm, travel distance Y-axis: 401 mm, travel distance Z-axis: 361 mm, controller manufacturer: FANUC, controller model: Series 31i, spindle speed (max.): 12,000 rpm, number of axes: 4, This 4-axis CHIRON FZ 15 KWM HS vertical machining center was manufactured in 2012. If you are looking to get high-quality milling capabilities, consider the CHIRON FZ 15 KWM HS machine we have for sale. Contact us for more information. Machine Benefits Technical Machine Benefits Ppodsx D Nmlopfx Ahvop • Availability: available from 1/7/25 • Operating voltage: 400 v • Control voltage: 230/23 v • Material processed in the machine: aluminum • Cone type : hsk-63 Extra Information Machine still under power

Condition: ready for operation (used), Year of construction: 2011, operating hours: 21,578 h, number of axes: 4, This 4-axis CHIRON DZ15KWM HS was manufactured in 2011. Ideal for precision vertical machining, this model offers robust construction and reliable performance. If you are looking to get high-quality milling capabilities, consider the CHIRON DZ15KWM HS machine we have for sale. Contact us for more information. Podpfsx D Nmrox Ahvepp Extra Information Machine still under power

Condition: ready for operation (used), Year of construction: 2012, travel distance X-axis: 550 mm, travel distance Y-axis: 320 mm, travel distance Z-axis: 360 mm, table load: 500 kg, spindle speed (max.): 12,000 rpm, tool weight: 5,000 g, number of axes: 3, This 3-axis CHIRON FZ 12 KW vertical machining center was manufactured in 2012. It features a high-speed spindle with a maximum speed of 12,000 rpm and a rapid traverse speed of up to 60 m/min on the Z-axis. The machine includes a 24-slot automatic tool changer and can handle a table load of up to 500 kg. Ideal for precision machining tasks. Contact us for more information about this machine. Machine Benefits Technical Machine Benefits • Controlled axes: 6 axes • Reach: 704 mm • Acceleration/deceleration: 0 to 12000 min-1 in 0. 6 seconds • Clamping surface: 820 x 440 mm² • Drilling capacity in st 60: Ø 16 mm • Tapping: m 16 • Milling capacity in st 60: 80 cm³/min • Acceleration: x & y axis 0. 7 g, z axis 1. 0 g Extra Information Movement Axis Movement Range and Speed: J1: 340°/360° (option) at 350°/s J2: 200° at 350°/s J3: 388° at 400°/s J4: 380° at 450°/s J5: 240° at 450°/s J6: 720° at 720°/s Allowable Load Moment: J4 & J5: 11.9 Nm J6: 6.7 Nm Repeatability: +/- 0.02 mm Maximum Speed J1: 195°/s J2: 175°/s Ppodpox Nr I Eofx Ahvep J3: 180°/s J4 & J5: 400°/s J6: 600°/s Allowable Load Moment J4 & J5: 7.7 Nm J6: 9.8 Nm Tools Automatic Tool Changer: Tool Pockets: 24 Tool Change Time: approx. 0.9 s Chip-to-Chip Time: approx. 2.4 s The workpieces are supplied via an automated feeding system and sequentially loaded into the Chiron machining centres by two Fanuc industrial robots. Once the machining processes are complete, they are removed again. The robots then transfer the components to a transfer system, which transports them to the downstream cleaning system. The integrated washing line ensures reliable cleaning of the components in accordance with the defined cleanliness specifications. After the washing process, two synchronously operating Fanuc robots take over the cleaned parts in the rear section of the system. Depending on the process specifications, these are either palletised automatically or further processed in a downstream step, for example by riveting. The entire system operates fully automatically.

Condition: ready for operation (used), Year of construction: 2006, travel distance X-axis: 300 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 250 mm, controller manufacturer: FANUC, controller model: 21i-M series, spindle speed (max.): 10,000 rpm, spindle motor power: 3,700 W, number of axes: 3, This 3-axis CHIRON FZ08W was manufactured in 2006. A vertical CNC machining center featuring a Fanuc 21i-M series control, it offers X, Y, Z travels of 300 mm, 250 mm, and 250 mm respectively. It includes a table size of 550 x 300 mm, a spindle speed of 10,000 rpm, and a 12-position tool magazine. Consider the opportunity to buy this CHIRON FZ08W vertical machining center. Contact us for more information. • Condition: Used • Status: Good • Table size: 550 x 300 mm • Permissible load: 200 kg • Tool magazine: 12 positions Additional equipment Ppedoygl D Hjpfx Ahvep • Chip evacuator

Condition: ready for operation (used), Year of construction: 2014, operating hours: 24,209 h, travel distance X-axis: 730 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 360 mm, controller manufacturer: FANUC, spindle speed (max.): 12,000 rpm, spindle motor power: 7,500 W, number of axes: 4, This 4-axis CHIRON FZ 15 W Magnum HS vertical machining center was manufactured in 2014. Ideal for precision machining, it offers robust construction and reliability. Consider the opportunity to buy this CHIRON FZ 15 W Magnum HS vertical machining center. Contact us for more information. Machine Benefits Pjdpsx D Nl Uofx Ahvepp Technical Machine Benefits • Number of tools per spindle: 48 • Tool holder: hsk-a 63 • Main spindle max. Torque: 95 nm Extra Information Machine still under power

Condition: ready for operation (used), Year of construction: 1995, travel distance X-axis: 550 mm, travel distance Y-axis: 300 mm, controller manufacturer: SIEMENS, controller model: Sinumerik 810D, spindle speed (max.): 10,000 rpm, spindle motor power: 95,000 W, number of axes: 2, This CHIRON FZ 12 W was manufactured in 1995. A vertical machining center featuring a SK30 spindle mount, maximum spindle speed of 10,000 rpm, and a tool magazine with 12 positions. It includes a Sinumerik 810D control system and rapid traverse rates up to 40 m/min. Table size measures 660 x 350 mm. Consider the opportunity to buy this CHIRON FZ 12 W vertical machining center. Contact us for more information. Machine Benefits Technical Machine Benefits • Control voltage: 230v / 24v • Power supply: 3x 400v, 50/60 hz • Rated power: 16 kva • Rated current: 34a • Rapid traverse (xyz): up to 40 m/min • Table size: 660 x 350 mm • Tool magazine: 12 positions • Tool changeover time: approx. 2 seconds Ppedpfx Ahex D Ryaovjp Extra Information When milling with an 80 mm diameter cutter, slight noise was audible in the spindle area.

Condition: ready for operation (used), Year of construction: 2021, controller manufacturer: SIEMENS, controller model: 840D, number of axes: 4, This 4-axis CHIRON DZ 18 W vertical machining center was manufactured in 2021. Consider the opportunity to buy this CHIRON DZ 18 W vertical machining center. Contact us for more information. Machine Benefits Technical Machine Benefits • Travel speed (x-y-z): 75 m/min • Spindle distance 400 mm Extra Information NC rotary table, type ATU 200, installed in the IWW/ Rotary feedthrough for IWW/ Axes on the work area/ Double-spindle headstock/ HS drive 2 x 25.3 kW - 15%, 12,000 rpm - 140 Nm/ Tool changer 2 x 35 tool positions, HSK-A 63, 8 kg/ VS drive X-Y-Z 75-75-75 m/min/ Automatic central grease lubrication/ Sinumerik 840D solution line, 10.4" color screen/ Control system/ Control interface/ RemoteLine SIE/MTX/ Maintenance management on screen/ for machining tilted surfaces, SIEMENS/ Operating hour and workpiece counter on screen/ Control cabinet cooler as door-mounted unit/ Signal light for 3 signals/ Fluid tower in open design/ Oil-free maintenance unit/ Cooling unit/ A u t t t e l l e l e m e n t e/ Chip conveyor scraper belt 1050 mm, rear/08, left/15, 18, 200 l/ Coolant system KF400-FKA900/900 l, 70 bar/ Bridge for cables and hoses/ Machine preparation for internal flushing/ Flushing of fixtures in the machining station/ 1 flushing gun outside the splash guard/ Work area flushing/ Ppsdpsx D Nmxefx Ahvop Additional equipment for extraction/extinguishing -/ Additional equipment for pneumatics/hydraulics -/ 1860 workpiece support control, coarse/ Hydraulic connection for 200 bar, single-acting/ Hydraulic connection for 200 bar, double-acting/ Regulated, lubricated air purge connection/ Hydraulic unit extension/ Additional equipment for measuring/tool breakage detection -/ RLP40Q measuring probe/ Whisker switch for tool breakage detection/ Additional equipment for machine operation -/ Automatic loading door Open/Close/ Walk Switch/ Additional Equipment: NC Control -/ M Function Package/ Variable Clamping Logic - Siemens/ Powersave/ Siemens Tool Management/ Comfort Cycle Fixture Flushing/ Revolutional Feed/ Loader Interface with Profinet/ Direct Door Detection in 'Open' Position/ Commissioning and Training/ Power Supply / Compressed Air 6 bar / Ambient Temperature 15°-40° C

Condition: ready for operation (used), Year of construction: 2003, travel distance X-axis: 2,000 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 550 mm, controller manufacturer: SIEMENS, controller model: Sinumerik, table width: 550 mm, table length: 2,600 mm, spindle speed (max.): 12,000 rpm, number of axes: 4, This CHIRON MILL 2000 Vertical Machining Center was manufactured in the year 2003. It is equipped with a Siemens Sinumerik control unit. The machine has a spindle speed of 12000 rpm. Ppjdpfeyi Eh Dox Ahvep Additional equipment • Chip conveyor Machine Benefits Technical Machine Benefits • Rapid feed 40 m/min • Tool magazine with capacity for 24 tools

Condition: ready for operation (used), Year of construction: 1993, controller manufacturer: SIEMENS, controller model: Sinumerik, This 4-axis CHIRON FZ 18 W was manufactured in 1993. It features dual 4th axes and is equipped with a SIEMENS SINUMERIK control system, enhancing its precision and efficiency. The addition of a chip conveyor aids in maintaining a clean work environment. Consider the opportunity to buy this CHIRON FZ 18 W vertical machining center. Contact us for more information about this machine. Machine Benefits Technical Machine Benefits Ppedpfx Ajyaaduohvsp • Axes: 4 with 2x 4th axis

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, travel distance X-axis: 450 mm, travel distance Y-axis: 270 mm, travel distance Z-axis: 310 mm, rapid traverse X-axis: 75 m/min, rapid traverse Y-axis: 75 m/min, rapid traverse Z-axis: 75 m/min, nominal power (apparent): 17 kVA, total height: 2,300 mm, total length: 1,500 mm, total width: 2,600 mm, overall weight: 3,400 kg, spindle speed (max.): 30,000 rpm, spindle nose: HSK40, number of slots in tool magazine: 40, input voltage: 400 V, type of input current: three-phase, Equipment: documentation/manual, CNC Machining Centre CHIRON FZ 08K S Magnum High Speed Plus (HSP) Ppjdpfxoyq Nyye Ahvop TECHNICAL CHARACTERISTICS: Year of manufacturing: 2007 CNC control: FANUC 18i-MB5 Number of axes: 7 Stroke X axis: 450 [mm] Stroke Y axis: 270 [mm] Stroke Z axis: 310 [mm] Traversing feeds X, Y and Z axes: 75000 [mm/min] Max. bar diameter in turning spindle: 32 [mm] Angular A axis stroke: 360 [°] A axis indexing precision: 0.001 [°] B axis swivelling stroke: -20° / +115 [°] B axis indexing precision: 0.001 [°] Spindle type: HSK40 Max. spindle speed: 30000 [rpm] Tool changer magazin number of stations: 40 Total power required: 17 [kVA] Supply voltage: 400 [V] Dimensions: 1500 x 2600 x 2300 [mm] Weight: 3400 [Kg] INCLUDED EQUIPMENT: x1 RENISHAW tool probe, type TS27R x1 spindle cooling unit x1 coolant tank x1 unit for 6th-face machining x1 SCHUNK clamping vice x84 tool holders - type HSK40 x14 collets - type F35 x1 electrical cabinet air conditioning unit x1 DONALDSON mist extraction unit - type Torit DCE x1 washing gun x1 three-color status light x1 MACHINING INSTRUCTIONS manual x1 operator manual x1 programming manual Machine visible under power in our premises by appointment. Price on request, loading on truck included. Possibility of shipping Worldwide. The information on this page has been obtained by the best of our ability. Therefore, its accuracy can not be guaranteed. Machines similar to Mikron, Hermle, DMG MORI, Mazak, Hedelius, AXA, Chiron, Matec, Reiden, Lagun, Haas, and Alzmetall, as well as CNC milling, drilling, and tapping machines, and CNC grinding machines

Condition: excellent (used), Year of construction: 2020, Unique opportunity to purchase this high quality CHIRON 5-axis machining center for profiles. Built and first use in 2020. The spindle was replaced in June 2022 and currently has 4500 operation hours. Machine is in very good condition and it can be inspected under power upon appointment. Availability: on request Including: Chip conveyor (scraper type) Profile bar feeder for bar lengths up to 6 m, for guiding profiles up to Ø 212 mm Coolant system TPF 350 / FKA 900 Coolant through the spindle Fixed 3D probe Type TS 27 R – RENISHAW Renishaw RLP40Q probe system Cnc control SIEMENS 840D X-axis 730 mm Y-axis 400 mm Z-axis 425 mm Maximum spindle speed 15,000 rpm Maximum torque 140 Nm Drilling capacity Ø 42 mm Thread tapping M30 Tool magazine capacity 20 tools Tool taper DIN 69893 HSK A63 Maximum tool diameter 65 mm Podpjyt I Uhefx Ahvepp Milling capacity 500 cm³/min in E355 steel Full technincal specifications in the attached document. Optional: ARMIN automatic robot cell (2024)

Year of construction: 2021, operating hours: 9,159 h, condition: used, machine/vehicle number: 374-19, the documentation is attached as a PDF Ppjdpfx Aheyn Ni Nevep

Year of construction: 2021, operating hours: 16,807 h, condition: used, machine/vehicle number: 374-20, the documentation is attached as a PDF Pjdpeyn Nkasfx Ahvopp

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, travel distance X-axis: 800 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 550 mm, controller model: Fanuc 18i MB5, rotational speed (max.): 20,000 rpm, TECHNICAL DETAILS Travel X-axis: 800 mm Travel Y-axis: 500 mm Travel Z-axis: 550 mm Main Spindle Type: HSK-A63 Max. speed: 20,000 rpm Turning Spindle Pjdpfeyn Ncpjx Ahvjpp Collet Chuck: Hainbuch SK65 BZI Max. speed: 4,000 rpm Bar capacity: approx. 65 mm MACHINE DETAILS Control: Fanuc 18i MB5 Drive power min.: 30 kVA Drive power max.: 50 kVA EQUIPMENT Tool measuring system: Blum Laser Control NT Additional magazine (92 tool stations) Coolant system / Paper band filter / High-pressure internal coolant supply (IKZ) Spindle chiller Bar feeder: Breuning RBK 10012 Inserts: 20 mm, 25 mm, 30 mm, 35 mm, 40 mm, 45 mm, 50 mm, Max. diameter: 60 mm Please note: No oil mist extraction, no CO2 extinguishing system included. Machine disassembly will be carried out by Chiron on 24.03.2026. Chiron will also perform a data backup.

Condition: good (used), Year of construction: 2007, functionality: fully functional, overall weight: 3,600 kg, spindle mount: MK 0, Equipment: chip conveyor, documentation/manual, • High-speed milling center for fast and efficient machining • Very high positioning and repeatability accuracy • Compact design with a generous work area • High-capacity automatic tool changer • HSK tool holder for high speeds and maximum stability • Siemens CNC control (model dependent) • Suitable for aluminum, steel, stainless steel, and non-ferrous metals • Made in Germany – durable, reliable, and easy to service 📊 Technical Data (model dependent) • Travels: approx. X 800 / Y 500 / Z 500 mm Ppedpfx Ahjyhhz Dovsp • High-speed spindle • Automatic tool changer • Coolant system • Chip conveyor • 3-axis machining 🏭 Applications Ideally suited for: • High-volume series production • Precision milling in tool and mold making • Automotive and supplier industries • Medical technology • General CNC metalworking

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: 498-56, travel distance X-axis: 800 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 550 mm, controller model: SIEMENS SINUMERIK 840 D, spindle speed (max.): 12,000 rpm, No reserve price – guaranteed sale to the highest bidder! Placing a bid obligates you to collect the item within one of the following periods: either between 11.05.2026 and 13.05.2026 or between 18.05.2026 and 21.05.2026! TECHNICAL DETAILS Travel range X-axis: 800 mm Travel range Y-axis: 550 mm Travel range Z-axis: 550 mm Spindle speed: 12,000 rpm Tool holder: SK 40 Number of tool stations: 40 Table dimensions: 850 mm x 350 mm MACHINE DETAILS Control system: SIEMENS SINUMERIK 840 D Chip conveyor manufacturer: KNOLL Paper band filtration system manufacturer: KNOLL Zero-point clamping system model: SCHUNK SDE 138 Dimensions & Weight Ppodpeym Anpjfx Ahvsp Dimensions (L x W x H): 5,500 x 3,700 x 2,900 mm Machine weight: 10,000 kg EQUIPMENT Tool holders and tools on the tool changer Measuring probe Recently fitted new spindle Note: A truck with a width of 3,000 mm is required for transport. External reference: Lot 11 / Wittner

Condition: excellent (used), Siemens 840 D, 48 tool stations HSK-A 50, spindle speed 15,000 rpm, workpiece changer, Knoll coolant system with internal coolant supply (IKZ), Thermodrive, mineral cast bed, automatic loading doors, central lubrication, additional extraction system for plastic chips, Podpfx Ahex D Up Sovepp

Condition: ready for operation (used), Year of construction: 1999, travel distance X-axis: 300 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 250 mm, Vertical milling center Chiron FZ08W Fanuc 21i-M Max RPM: 15,000 rpm High-pressure spindle through-cooling Ppedpfx Ajxd T Rzjhvep X = 300 mm Y = 250 mm Z = 250 mm The machine was originally supplied with 2 x 4th axis Peiseler RT 100, but the 4th axes have now been removed. Tool interface: HSK 32 ATC: 24 positions Serial: Yrzzng Machine is currently in production and can be inspected at any time. The machine is in very good technical condition. I offer a 3-month startup warranty.

Condition: good (used), Year of construction: 2007, functionality: fully functional, Vertical CNC Machining Center Chiron FZ OSK S Magnum SK with NC swivel head, rotary table package, bar feeder, and discharge unit Year of manufacture: 2007, Factory overhaul in 2017 Operating hours approx. 22,500 h Technical data: Siemens 840D (PCU 20 / NCU 572.4) Ppsdpfjypbmcex Ahvjp NC swivel head, swivel range -20° / +115°, water-cooled motor spindle, 15,000 rpm. Axes travel X 450mm / Y 270mm / Z 310mm Rapid traverse in X / Y / Z: 75 m/min. / Acceleration: X 1g / Y 1.5g / Z 2g 40 tool stations HSK-A 40, chip-to-chip time 2.6 sec. (vertical, to DIN standard) Additional equipment: Preparation for bar machining Rotary table package AWU 160 with D105mm (positioning axis), Hainbuch Spanntop collet chuck D100, additional equipment for 6th side machining Part removal handling and discharge unit for finished parts, bar loader IRCO SiMag 100.1-3000 (for round and profile material) Coolant gun, machine prep for high-pressure ICS 70 bar (vario-valve), fixture flushing Scraper-belt chip conveyor with discharge height 1050 mm, vacuum rotation filter VRF 400 ltr., manufacturer KNOLL MAHLE dual change-over filter Electrical cabinet cooler, signal light Tool life monitoring, tool breakage control, Single F500 3D probing system, Renishaw TS27R Brankamp Marposs collision monitoring CMS 100 Accessories: Breuning IRCO guide channel sets and Hainbuch collets (as per agreement) HSK-A40 tool holders Spare parts for this machine type including special operating materials Note on machine concept: Unmanned complete machining 24/7 of cubic components. Material supply via bar loader D100 / 3000 mm for round and profile material. Rotary table as positioning axis and machining of 4 surrounding faces via vertical milling spindle. Machining of the end face (5th side) horizontally with swivel head. Clamping of workpiece via clamping stock, separating workpiece and 180-degree rotation, machining of the 6th side again horizontally with swivel head. Removal handling and discharge unit into parts buffer. Note on machine condition: The machine was factory overhauled and technically updated in 2017 by Chiron (CMS). The last spindle replacement was carried out in September 2025. The last manufacturer service was in October 2025 (major annual maintenance, 4,000 h). From new until today, the machine has been continuously maintained, repaired, and kept up-to-date by the manufacturer through a full-service contract (preventive maintenance).

Condition: ready for operation (used), Year of construction: 2007, A CNC machining center Chiron factory-overhauled by the manufacturer in 2017 is available. Travel path X/Y/Z: 450mm/270mm/310mm, NC head swivel: -20°/115°, tool positions: 40, tool holder: HSK-A40, speed: 15000rpm, control: Siemens 840D, operating hours: approx. 22500h. Including rotary table package AWU 160 with D105, collet chuck, handling, bar feeder Irco SiMag 100.1-3000, through-coolant preparation, scraper belt conveyor (1050mm), duplex filter Mahle, vacuum rotary filter Knoll VRF 400, approx. 500 tool holders HSK-A40 and various spare parts. Documentation vorhanden. An inspection on site is possible. Podpfx Ahoyn Nz Ejvopp

Condition: ready for operation (used), Year of construction: 2013, functionality: fully functional, travel distance X-axis: 2,000 mm, travel distance Y-axis: 685 mm, travel distance Z-axis: 630 mm, controller model: Siemens 840D, rotational speed (max.): 20,000 rpm, The machine spindle was replaced in 2022! The original purchase price of the machine was EUR 600,000! TECHNICAL DETAILS Travel range X-axis: 2000 mm Travel range Y-axis: 685 mm Travel range Z-axis: 630 mm Rapid traverse on all axes: 40 m/min Axis acceleration: 0.25 g Max. spindle speed: 20,000 rpm Max. rotary table speed: 1,000 rpm Tool changer positions: 92 Tool holder: HSK 63 NC swiveling axis: ± 100° MACHINE DETAILS Control: Siemens 840D EQUIPMENT Remote diagnostics and teleservice Maintenance instructions displayed on screen 5-axis milling package Fixed table with integrated rotary table Kessler milling rotary table DTE 520 NC swiveling head with spindle stock Direct measuring systems Chip conveyor (hinged belt) Coolant system HL 450 / 900 (IKZ) Full-flow cleaning via paper band hydrostatic filter HL450 Coolant filtration 50 µm nominal Chip blow gun Coolant recooling unit Additional tray rinsing Machine preparation for air through spindle Work area extraction system Safety package MILL 2000 with reinforced cabin and safety glass Zero point clamping system NSL tur 570-5-Z for DTE 520 Tool breakage monitoring Measuring probe Renishaw OMP 40-2LS Rotating inspection window Chiron Power Service Siemens CNC control with OP019 19" color display Operating mode: 4 Ppedeymnykopfx Ahvjp MCIS DNC for sending and receiving CNC programs in network operation Siemens tool life monitoring Measurement in JOG (zero point determination during setup in jog mode) Loading and unloading station for tools for main time parallel tool change on background magazine Additional window for background magazine Swiveling control panel for optimal visibility of the work area during setup Note: The two vices on the NC rotary table as well as the tool holders in the tool changer are not included in the offer.

Condition: used, Year of construction: 1989, operating hours: 12,142 h, functionality: limited functionality, Equipment: chip conveyor, documentation/manual, For sale: 1989 Chiron FZ22 W machining center with dual pallet system. The machine operates accurately. Occasionally, there is a tool change error— the tool is not properly positioned into the spindle. Compatible with SK40 tool holder. Fitted with Sinumerik 810 control. Comes with chip conveyor and Knoll AE 1058.009 water treatment system; all machine manuals are included. Can be demonstrated under power upon request, currently not in production. Loading assistance is not available. Ppedpfoymbdijx Ahvop