Used Cheapboard Making for sale (7,969)

Condition: used, Year of construction: 2022, PRODUCT TYPES: • Four side seal pouches • Quad seal pouches • Side seal pouches • Transverse zipper pouches • Gusset pouches • Bottom stick hole pouches • Micro-perforated pouches • Handle hole pouches • Round corner pouches MATERIALS: • LDPE • CPP • MCPP • AL • Nylon • PP • Laminated film structures MAIN TECHNICAL INFORMATION: Material thickness: 60–250 μm Max. web width: 1300 mm Max. roll diameter: 800 mm Core diameter: 3” and 6” Max. pouch width, quad seal: 400 mm Max. pouch length: 1000 mm Eye mark accuracy: ±1 mm Machine speed: 15–65 pcs/min Material speed: 40 m/min Main power: 400V, 50Hz, 3 phase Installed power: 100 kW Machine weight: approx. 18,000 kg Machine size: 33,500 × 4,200 × 1,800 mm POUCH SIZE RANGE: Quad seal / side welded width: 180–400 mm Gusset depth: max. 80 mm Minimum gusset depth: 30 mm Bag length: 360–1000 mm UNWINDING SECTION: • Air shaft unwinding • Magnetic powder brake • Dancing roller tension control • Servo-driven unwind system PERFORATION SYSTEM: • Micro perforation unit • Wheel type perforation • Additional perforation holes • Same type as existing machine configuration FOLDING SYSTEM: • Four side seal / quad bag folding wheel section SEALING AND COOLING SYSTEM: Mechanical press sealing system: Quad seal longitudinal sealing: 2 groups, 1010 mm Quad seal longitudinal cooling: 2 groups, 1010 mm Cross sealing station: 6 sets No. 1: K-seal No. 2: Gusset filling sealing Todpfxszf Nk Tj Acnjb No. 3: Cross seal, 740 mm length / 60 mm width No. 4: Cross seal, 740 mm length / 60 mm width No. 5: Cross seal, 740 mm length / 60 mm width No. 6: Cross cooling, 740 mm length / 60 mm width Additional 5 mm sealing section, upper and bottom PUNCHING SYSTEM: Tear slit / notch puncher 3-hole handle puncher Handle puncher: 20 × 80 mm, 3 sets Hole sizes: • 3 holes Ø20 mm • 20 × 80 mm • 24 × 77 mm Round corner puncher: 2 sets Puncher supports: 3 sets Bottom stick hole puncher: • 12 mm, 8 pcs • 16 mm, 8 pcs Vacuum system for punch waste removal DRIVE SYSTEM: Main motor: 3.5 kW Back draw roller servo: 3.5 kW Front draw roller servo: 3.5 kW Middle draw roller servo: 3.5 kW Longitudinal independent sealing servo: 5 kW × 2 Unwind servo motor: 1.5 kW × 1 / 3.5 kW × 1 Tension control servo: 3.5 kW × 1 Flying knife servo: 1.5 kW × 1 Manipulator sucker drive: 0.75 kW × 1 Finished product carrier counting drive: 0.75 kW × 1 CONTROL SYSTEM: • PLC control • 10” touch screen • Suitable for printed and unprinted bags • 16 temperature control zones • Individual temperature display • Temperature tolerance: ±2°C • High-sensitive eye mark sensor • Adjustable eye mark position STACKING SYSTEM: • Simple type stacking table • Static removal system • Automatic stop when machine stops • Alarm for bag output range: 25–100 bags • Step motor belt control • Belt width: 60 mm • Adjustable batch and belt length SAFETY SYSTEM: • Safety light curtain • Emergency pulling rope • Emergency buttons every 2 meters • Individual emergency control INCLUDED OPTION: ZIPPAK transversal zipper attachment Transversal zipper unwinder and rewinder Innolock / Velcro zipper capability Tooling for 3 zipper sizes: • 180–220 mm • 230–300 mm • 310 mm Micro-perforation holes Bottom stick hole puncher Trim rewinders Chiller

Condition: good (used), ZNHZ-508A Envelope Making Machine Paper weight 70 – 150 g/m² Production rate 3000 – 9000 pcs/h Maximum folded envelope size Western Style 324 x 229 mm Min. folded envelope size 100 x 100 mm Power 8 kW Weight 3000 kg Dimensions 6600 x 1200 x 1300 mm Year of manufacture 2014. Tedpfx Ajzl S T Rocnsb Key advantages of the machine: – A bottom-mounted vacuum feeder allows for continuous material loading without stopping the machine. – A proprietary adjustable creasing and perforation system on the machine cylinder allows for loading material in the form of only the cut-out envelope outline. – Simple and easy adjustments simplify and shorten makeready time. – Standard bookbinding glue is applied from an inkwell through rotating rings with precise adjustment of its position and intensity. – Glue for the closure is also applied from an inkwell with precise adjustment of the intensity. – A vacuum suction system located on the cylinders allows for perfect folding of envelopes even at very high speeds. – The machine has two folding systems enabling double-closing of envelopes. – The electronic counting system is equipped with an electromagnetic separating device, allowing for separating envelopes, e.g., 50 pieces per envelope.

Condition: good (used), Year of construction: 2006, total length: 6,000 mm, total width: 1,950 mm, total height: 3,850 mm, overall weight: 5,000 kg, For Sale: Todpfxozx Er Hs Acnsb Make: Mecatherm Model: BLOC HPII Included: - Mecatherm pre-proofing cabinet / pre-proofer (without infeed conveyor!) - control panel - tray supply and discharge conveyor - 90-degree curved conveyor for trays - Mecatherm spreading unit - documentation Conveyor width: 700 mm Spreading conveyor width at the pre-proofing cabinet outlet: 1000 mm 8 rows stacked on top of each other. Price includes careful dismantling and loading into the truck / container. It is possible to view the machine on site. It is currently still set up. If you have any questions or comments, please feel free to call or email us.

Year of construction: 2010, operating hours: 196 h, condition: excellent (used), functionality: limited functionality, bending cheek thickness: 100 mm, additional equipment features: Separate Bending Arm Available, bending radius (min.): 700 mm, The Machine is VERY Sparingly used, Exactly used for bending 196 Bends. Available in Dismantled Condition in Southern Part Of INDIA, for a Very Attractive Price . Tjdezc Uu Hspfx Acnjb

Condition: ready for operation (used), Year of construction: 2015, functionality: fully functional, total length: 35,000 mm, total height: 3,500 mm, input voltage: 400 V, type of input current: three-phase, Equipment: documentation/manual, Bystronic IG production line for glass units Maximum size: L4200 x H2700 Minimum size: 180 x 350 mm Todpjzxx Etefx Acnjb (double, triple, and shaped glass) An automatic butyl extruder can be offered as an option. Contact us at 0032479588591 to arrange a visit.

Condition: like new (used), Year of construction: 2020, operating hours: 9,422 h, functionality: fully functional, We are selling, on behalf of a client, a used, recent-model, like-new 5-axis machining center with a GANTRY design; model DMU 340 Gantry; year of manufacture 2020; 9422 operating hours; 2991 spindle hours. It features a SIEMENS CELOS operator interface. All specifications, technical data, or configurations of the machine are available upon request. The machine is available for demonstration and can be inspected immediately. Further original photographs are available upon request and after verification of your identity. Tsdpfx Ajzx Ek Ajcnsb A resale to dealers is not currently planned. Please refrain from making such inquiries.

Condition: used, Year of construction: 2023, functionality: fully functional, turning diameter over cross slide: 410 mm, turning length: 500 mm, turning diameter: 410 mm, spindle bore: 80 mm, spindle speed (max.): 5,000 rpm, travel distance X-axis: 260 mm, travel distance Y-axis: 90 mm, travel distance Z-axis: 510 mm, spindle motor power: 22,000 W, rapid traverse X-axis: 25 m/min, rapid traverse Y-axis: 12 m/min, rapid traverse Z-axis: 30 m/min, rotational speed (max.): 5,000 rpm, total height: 2,145 mm, total length: 3,272 mm, total width: 2,619 mm, quill stroke: 150 mm, overall weight: 6,800 kg, swing diameter over bed slide: 580 mm, Equipment: documentation/manual, We offer this used Okuma LB3000 EX II MY CNC lathe with ARMROID Automation. Year: 2023. Control: OSP-P300LA Excellent Clean Condition, fully operational and under power. Configuration: Single spindle CNC Turning Center with Armroid Robotic Arm. Main Spindle Seed: Up to 5,000 rpm Spindle Bore / Bar Capacity: 80mm Max Turning Diameter: 410mm Max Turning Length: 500mm Swing Over Bed: 580mm Turret: 12-station live tol turret Tjdpfx Acezi Ihfoneb Spindle Motor Power: 15 kW (20 HP) - (continuous) Y Axis Travel: 120mm (+70 * -50mm) Thermal Stabilization system (TAS for spindle and structure) to mitigate thermal expansion. Tail Stock Integrated Okuma robotic arm system for lights-out operation. Chip conveyor Regularly maintained and in excellent condition - last service September 2025 Byer is responsible for removal and delivery Machine can be used with or without robot loader as required making it very versatile

Condition: ready for operation (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: L-232.0495, total length: 12,000 mm, input voltage: 400 V, feed length X-axis: 2,300 mm, feed length Y-axis: 2,500 mm, type of input current: three-phase, Equipment: documentation/manual, Automatic butyl extruder in excellent condition, technically refurbished by Glaston in 2025. Upgrades to the operating panel and replaced parts are listed; please contact us for more information. Maximum size: 2300x2500mm Minimum size: 250x250mm, but not suitable for Georgian bars. Tjdszw Erwopfx Acnjb

Condition: good (used), Duplo DSC-10/20 + DBM-150 + DBM-150T Booklet Making Line This machine is in very good condition and is the latest booklet making system from Duplo. Made in Japan, 2018. Controlled via a control panel. The line consists of: – DSC-10/20 collator – vacuum feeding – LUL-HM manual feeder connector – DBM-150 stitching and folding unit – stitching and folding in one unit – DBM-150T front trimmer – Long outfeed table – Built-in stacker for stacking sheets. The machine includes documentation, small parts, etc. Tsdpfx Aozw T Dhscnsb

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: 1.191, total length: 12,000 mm, total width: 2,500 mm, total height: 2,900 mm, input voltage: 400 V, overall weight: 2,000 kg, type of input current: AC, power: 4.5 kW (6.12 HP), Equipment: documentation/manual, Fully automatic frame bending machine for insulated glass spacers. Materials: Aluminum and stainless steel profiles, as well as plastic profiles (e.g., Swisspacer, Thermix, TGI, Rolltech) Profile widths: from 6 mm to 24 mm Interfaces (e.g., floppy disk drive, network/Ethernet, or serial interface) for connection to production optimization software (such as LiSEC, Albat+Wirsam/A+W). Tsdpfozv Hymex Acnjb The "XL" (large-format) version: The XL variant features extended feed and collection belts. This allows for the processing of extremely long, one-piece spacer bars (often up to 6 meters) to bend very large insulated glass windows (jumbo or oversized formats) in a single piece without additional longitudinal connectors. Supporting roller mechanism: A characteristic feature of R&R. During the bending process, plastic deformation is supported by a roller, ensuring extremely tight, visually flawless corner radii without material compression. Counter-bending: Bending is performed using profile-specific tools. This prevents the buckling of the thin-walled hollow profiles. 6-position profile magazine.

Condition: used, Year of construction: 2007, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, year of last overhaul: 2022, We are offering this used KÖNIG ECO TWIN roll production line, manufactured in 2007. Model: ECO TWIN Type: 800-(DB800)-K6-SCHN6/B-(DA) Serial number: 07.0.0782 Year of manufacture: 2007 Power: 8 kW Frequency: 50 Hz Rated voltage: 3 × 400 + N V Rated current: 15 A The system has been fitted with new belts and is in perfect, fully functional condition. It was used by us solely as a backup system and was therefore only used very rarely. We acquired and overhauled the system approximately two years ago. Todoznm S Hopfx Acneb The system is immediately available and can be collected directly after arrangement. If you have any questions or require further information, please feel free to send us a message or call us.

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, operating hours: 200 h, power: 4.5 kW (6.12 HP), input voltage: 380 V, type of input current: three-phase, travel distance X-axis: 1,800 mm, travel distance Y-axis: 4,500 mm, travel distance Z-axis: 1,050 mm, number of axes: 4, controller manufacturer: Syntec, total height: 3,600 mm, total length: 5,800 mm, total width: 2,440 mm, overall weight: 2,600 kg, table length: 5,400 mm, table width: 2,030 mm, For sale is a large-format, 4-axis CNC portal milling machine from Yishun, privately owned. With its enormous working area and 1050 mm Z-axis, the machine is ideal for the precise machining of large components made of foam (Ureol/Styrodur), plastics, wood, and aluminum (e.g., for mold making, boat building, or prototype construction). The machine has only been in operation for approximately 200 hours (year of manufacture 2016) and will be handed over in perfect mechanical and electrical condition. High-quality industrial components have been used throughout. TECHNICAL DATA & COMPONENTS: • Working area (X/Y/Z): 1800 mm x 4500 mm x 1050 mm • External dimensions: approx. 5800 mm x 2440 mm x 3600 mm (L x W x H) • Weight: approx. 2600 kg • Spindle: High-quality HSD spindle • Drives: Reliable, powerful Yaskawa servo motors • Controller: Syntec controller (machine can be moved on-site) • Guides & Mechanics: HIWIN linear guides, WMH rack and pinion with precise Rouist gears on the servo motors, ball screw in the Z-axis feed Tedpfxozv U Tbo Acnjb • Equipment: Integrated zero-point sensor for the Z-axis. Post-processors for HSMtec are available to a limited extent. • Reference: The finely finished aluminum milling sample produced on the machine, shown in the video, is available (see photos). • Note on scope of delivery: The machine does not have an automatic tool changer, dust extraction system, or vacuum clamping table. CONDITION & HISTORY: The machine has been unused but stored dry in a hall for the past few years. To consistently prevent the onset of surface rust due to natural humidity in the winter, the steel structure was recently preventively re-primed and painted. The guides are completely free of rust and have been regularly preserved. The machine runs perfectly mechanically and electrically. IMPORTANT INFORMATION REGARDING TRANSPORT & PICK-UP: 1. Private sale: The sale is made by a private individual, excluding any liability for defects, warranty, or right of return. No VAT can be charged. Purchased as seen and tested. 2. Loading assistance on-site: A suitable forklift will be arranged and can be used free of charge for loading onto your low-bed trailer or truck. 3. Transport options: The machine is primarily intended for self-collection. Delivery within a close radius (up to 50 km) is possibly possible after prior arrangement and upon payment of costs. If transport over longer distances is an issue, we will certainly find a joint solution after prior consultation or provide assistance in finding a freight forwarder. We are open to realistic price offers. An inspection and demonstration of the axes on-site in 91183 Abenberg are welcome after prior arrangement.

Condition: used, Year of construction: 2014, functionality: fully functional, input voltage: 400 V, overall weight: 2,200 kg, type of input current: AC, Equipment: documentation/manual, We are offering this used LISEC LBH-25AR insulating glass manufacturing machine, manufactured in 2014, for sale. Serial/drawing number: 572-074946 Weight: 2,200 kg Rated current (full load): 10.0 A Apparent power: 7.00 kVA Voltage: 400 V Frequency: 50 Hz Short-circuit strength: 10 kA Pressure: 6.00 bar Degree of protection: IP32 Maximum current: 1.4 A Tsdpszmn Iyjfx Acneb AC/DC voltage: 400 / 24 V If you have any questions or require further information, please feel free to send us a message or call us.

Condition: good (used), Year of construction: 2006, total length: 16,500 mm, - washing machine (requires renovation) - assembly station - panel press without gas filling, in good condition (size 2100 x 2500 mm) - knockdown table - year: 2006 - line length: 16.5 m - direction: right to left Tjdpfx Acozk A Hxonsb

Condition: ready for operation (used), Year of construction: 2022, functionality: fully functional, working height: 640 mm, input voltage: 400 V, overall weight: 3,200 kg, type of input current: three-phase, Equipment: documentation/manual, Maximum unit length: 4000 mm x 2500 mm (height) Minimum unit dimensions: L320 x 180 mm Minimum unit thickness: 12 mm (3+6+3) Maximum unit thickness: 65 mm; unit pane between 3-25 mm, and spacer between 6 and 24 mm. Maximum unit weight: 200 kg/m Tjdpfxozduhuo Acnsb Optional: custom shapes and triple units.

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, HORIZON SPF-200A Booklet Making Line | VAC-100 + FC-200A + ST-40 Description: For sale: complete Horizon booklet making line consisting of collating, stitching, folding, trimming and stacking modules. Reliable Japanese production system, ideal for commercial print shops. The machine is fully operational and currently installed in production environment. ---- Configuration includes: Air-suction collator: VAC-100a + VAC-100m Stitching & folding unit: SPF-200A Fore-edge trimmer: FC-200A Stacker delivery: ST-40 ---- Technical specifications: 1. Collator (VAC-100a / VAC-100m): Voltage: 230 V Frequency: 50 Hz Current: 10.4 A (each tower) Feeding system: air suction Configuration: 2 towers x 10 bins 2. Stitcher & Folder (SPF-200A): Voltage: 230 V Frequency: 50/60 Hz Current: 3.4 / 3.2 A Functions: saddle stitching (2 heads) folding booklet production 3. Trimmer (FC-200A): Automatic fore-edge trimming Inline operation with SPF-200A High trimming precision 4. Stacker (ST-40): Voltage: 230 V Frequency: 50 Hz Current: 4.7 A Automatic sheet stacking ---- Todpey Axdaefx Acnob Condition: Good working condition Complete production line Currently in use Total counter: approx. 1.8 million booklets ---- Advantages: ✔ Complete booklet production system ✔ Renowned brand: Horizon ✔ Inline workflow ✔ High productivity ✔ Reliable and easy to operate ---- Additional information: Machine can be inspected in operation Test production possible Assistance with installation available Availability: to be agreed

Condition: used, Year of construction: 2021, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, For sale is a professional, compact roll fermentation cabinet system from Werner & Pfleiderer (WP), model Super-B. The system comes from a working bakery and is the ideal solution for artisan businesses that want to achieve high and consistent roll quality in a compact space. Perfectly suited for the efficient production of sliced rolls, Kaiser rolls, and round rolls. The roll system has a side discharge which can be used for other machines. Advantages & Features: • Compact design: Extremely space-saving and ideal for bakeries with limited space. • Gentle dough processing: Ensures excellent dough piece quality and optimal dough development. • Reliable WP quality: Robust bakery technology designed for daily, heavy-duty use. • Versatile: Ideal in combination with a WP Multimatic head machine. Technical Data & Condition: • Manufacturer: Werner & Pfleiderer (WP) • Model: Super-B • Condition: Used, with normal signs of wear and tear commensurate with its age. The machine has operated reliably until recently. • Year of Manufacture: 2021 • Power Connection: 400 V / 50 Hz Sales Conditions & Price: • Price: €30,000.00 net (plus 19% VAT) • Invoice: You will receive a proper invoice with VAT shown. • Warranty: The sale is of a used machine to commercial customers, excluding any warranty, guarantee, or right of return. Tsdpfozlxc Eex Acnjb • Appointment for viewing can be arranged. • Shipping/Collection: Collection and dismantling by the buyer only. Optional: A forklift is available on-site to assist with loading. The information in the advertisement is non-binding and does not constitute guaranteed characteristics. The seller is not liable for typographical, data transmission, or input errors. Subject to changes, errors and prior sale. Only the agreements in the purchase contract are binding.

Condition: used, Year of construction: 2018, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, We are offering this used KÖNIG CertoPan M roll production line, manufactured in 2018. Model: CertoPan M Year of manufacture: 2018 Machine no.: 32.1.0103 Power: 3 kW Rated voltage: 3x400+N V Rated current: 6 A Tsdpfx Acsznm Unjneb Frequency: 50 Hz The system is currently still in daily use and is in fully functional condition. All service and maintenance work, as well as any necessary repairs, have been and will continue to be carried out regularly. An inspection of the running system is possible at any time by arrangement. The system is expected to be available from spring 2027. If you are interested or have any questions, we look forward to hearing from you. If you have any further questions or require more information, please do not hesitate to send us a message or call us.

Condition: ready for operation (used), Year of construction: 2020, operating hours: 25,585 h, spindle speed (max.): 7,000 rpm, controller manufacturer: FANUC, controller model: Series 31i-MODEL B, This SPINNER TTS 42 Lathe was manufactured in the year 2020 in Germany and has 25585 production hours. It is equipped with a Fanuc Series 31i-MODEL B control unit. The machine has a spindle speed of 7000 rpm. See tech specs file as PDF (German) attached for more details. Machine Benefits • main spindle was replaced 2023 • maintained internally • runs on emulsion • no fire extinguishing Qualitative Machine Benefits • Unimag interface for bar loading magazines Tedezx Ag Iepfx Acneb • Parts conveyor belt • Spinner bar loading machine type servo. Make spinner, for spindles up to 42mm passage, for material d=4-42mm, length up to 3,200 mm • 10x external turning holder • 12x boring bar holders d=32 • 3x recessed boring bar holders • 6x straight agw • 3x axial agw • Material processed so far: aluminum, brass Technical Machine Benefits • Spindle 2 (counter spindle) in version up to 7,000 rpm - 42mm • Revolver 1 : 12-fold with cnc servo drive revolver 2 : 12-speed with cnc servo drive revolver 3 : 12-speed with cnc servo drive dmjgmx • Ejector unit integrated in counter spindle for ejecting parts into the parts catcher • Signal lamp on top of machine in three colors red/yellow/green as status display • Late conveyor as hinged belt conveyor exiting to the right, incl. Integrated coolant tank and return pump • Coolant system as additional tank incl. Submersible pump 80l/4bar, high-pressure pump up to 80bar / 19. 5l/min • Flushing gun in the work area • Holder for messtaster on the machine bed as preparation for the use of a • Messtaster for tool measurement switching in 3 axes. • Extraction d=200 to the working area for connection to extraction system

Condition: used, Year of construction: 1987, functionality: fully functional, shaft length under head: 160 mm, thread length: 85 mm, total width: 2,800 mm, total length: 7,800 mm, bar diameter (max.): 16 mm, Machine is complete bolt making machine with pointing and threading. Tjdpfxsztrpne Acneb

Condition: used, Year of construction: 1999, Good Lisec extruder. Year: 1999 Tedpfx Acjzavm Esneb Condition: as is.

Condition: used, Year of construction: 2008, functionality: fully functional, machine/vehicle number: K08003, cutting length (max.): 650 mm, type of input current: three-phase, working width: 1,170 mm, input voltage: 380 V, NEWLONG 2036TS + 508HS Automatic Paper Bag Making Machine Manufacturer : NEWLONG Model : 2036TS + 508HS Year : 2008 Serial No. : K08003 Origin : Japan Condition : Good Working Condition Specifications • Bag Width : 200 - 360 mm • Bag Length : 260 - 590 mm • Cutting Length : 350 - 650 mm • Bottom Width : 70 - 210 mm • Max. Paper Roll Width : 1,170 mm • Production Speed : Up to 180 bags/min Main Features • Full Servo Controlled System • Gearless Drive • Shaftless Unwinder • Automatic Roll-fed Operation • Concealed Flat Paper Handle Unit (508HS) • High Precision Photo Cell Registration • Fast Size Changeover • Stable High-speed Production Todpfx Aozmq T Eecnjb The machine is in good operating condition and can be inspected under power. Inspection and test run are available upon request. Please contact us for additional photos, videos, or quotation.

Condition: used, Year of construction: 2009, REINHARDT-TECNIK ECOSTAR 250 Tedpfx Aszhxy Ajcneb

Condition: good (used), Horizon VAC-600Ha + VAC-600Hc + SPF-200a + FC-200a Booklet Making Line The machine is fully operational and ready for production. Very low mileage, with only 1.3 million bindings. This is one of the newest Horizon models. The entire machine is set up from the control panel. Made in Japan. The line consists of: Max size: 350x610mm (with shelf extension) Min size: 120x148mm Max speed: 9500 sets/h Vacuum-air feeding 6 shelves x 2 towers. Stack height: 130mm Weight: 40-350g Power supply: 230V Weight: 325kg/piece The towers are of the latest generation with new compressors (large box), a new type of photocell, and a new wireless remote control. Controlled via a color touchscreen display and a wireless remote control. Jam, double-feed, and misfeed sensors Horizon SPF-200A Tjdpfx Acjzur Hcsnsb 10.4″ color touchscreen display Non-stop operation thanks to the mis-collection ejection function Max size: 508x356mm; Min size: 180x120mm Max speed: 4500 booklets/h Weight: 500kg Wire stitching Folding Two Hohner 43/6 s heads (max. 4) Storage capacity: up to 200 jobs in the machine’s memory. Horizon FC-200A Cutting thickness: 4-5mm 230V power supply Weight: 244kg New trimmer design, stable operation with servo motors, and additional booklet guide. The machine includes: LC-200 delivery, PK-20 bundling device, and a jogging table. PJ-77R service tools, spare parts, documentation.

Year of construction: 2020, operating hours: 6,000 h, condition: excellent (used), functionality: fully functional, Fully Automatic Paper Bag Making Machine for Sale – WFD-550 Fully automatic paper bag making machine, model WFD-550, manufactured in 2020, available for sale. The machine is in good working condition and was used in production for only 2 years. It has been regularly maintained and operates reliably. Main features: - Production of paper bags with twisted handles - Production of paper bags with flat handles - Fully automatic feeding and forming process - Stable and efficient operation The machine is suitable for industrial production and can be used for manufacturing shopping bags, packaging bags, and other paper products. Condition: good technical condition, ready for operation. Price: negotiable For serious inquiries, please contact by email. Tsdpfoyuf T Rox Acnjb