Used Carrying Chair for sale (3,582)

Condition: new, maximum load weight: 17,900 kg, overall weight: 27,900 kg, axle configuration: 2 axles, total width: 2,550 mm, Year of construction: 2025, Equipment: ABS, Neuer Auflieger fully galvanized, fully galvanized with VDI2700 TuV Certificate for 6 Cars, also for damaged Cars, since the two winds have been installed, which have been hydraulically serviced. Self-service with 24 Volt connection or hydraulics from LKW. Weitere Informationen erhalten Sie bei Mannes New semi-trailer wiht VDI 2700 TuV certificate fully immersed for 6 cars, also for damaged cars, there are two winches mounted, also hydraulically driven self support by nato 24 volt connection more information call Mannes New semi-trailer available with VDI 2700 TuV certificate fully immersed for 6 cars, also equipped for damaged cars, two winches are mounted on it, also hydraulically driven self support by nato 24 volt connection more information call Mannes Nowa naczepa VDI 2700 TuV ca?kowicie zanurzone dla 6 samochodów, tak?e dla samochodów uszkodzonych, zamontowane s? dwie wci?garki, równie? nap?dzane hydraulicznie samoobs?uga przez po??czenie nato 24 V. wi?cej informacji dzwo? do Mannes ????? ????? VDI 2700 TuV certificate ????? ????? ?? 6 ?????, ????? ??? ????? ?????, ????? ??? ?????, ????? ? ????? ????? ????? ????? ????? 24?. ??? ????? ????? ????? ????? ????? Nuevo semirremolque included VDI 2700 TuV complete sumergido for 6 automóviles, también para automóviles dañados, se montan dos winches, también de accionamiento hidráulico Autoservicio a través de una conexión nato de 24 V. para más información llame a Mannes Nouvelle semi-remorque VDI 2700 TuV complètement immergé pour 6 voitures, également pour les voitures endommagées, deux treuils, également entraînés hydrauliquement, sont montés Libre service via connection nato 24 V. pour plus d'informations appelez Mannes Iajdpfxjmnpdas Ah Nol

Condition: used, functionality: fully functional, empty load weight: 9,000 kg, maximum load weight: 21,000 kg, overall weight: 30,000 kg, axle configuration: 2 axles, first registration: 07/1995, loading space length: 13,700 mm, loading space width: 2,500 mm, suspension: air, tire size: 285.70 r 19.5, color: black, Year of construction: 1995, Equipment: ABS, tail-lift, sem racing set-up zorzi gooseneck, 2-axle pneumatic chassis, insulated load-bearing set-up with 10 q.li dhollandia racing rear side, double-level side storage, rounded head, internal part with workshop and 2-vehicle shelter with upper floor and aisles, living area with beds and sofas and bathroom on the neck, complete side awning included + removable mirrored walls, side access door with stairs and rear door, INTERDRIVE SRL-PARMA DEALER Iajdsv T Ugaspfx Ah Nol

Year of construction: 2008, condition: used, functionality: fully functional, empty load weight: 582 kg, load capacity: 10,000 kg, Carrying mandrel Load center of gravity: 600 Condition: Ready for use and fully functional Technical condition: good Ijdjv Argcspfx Ah Neal Description: Price and other features on request

Condition: used, functionality: fully functional, Year of construction: 2020, load capacity: 800 kg, Two battery assembly trucks from Schairer Apparatebau are for sale. Viewings are available by appointment. Ijdpfx Ahsv Tv Das Nsal

Condition: used, mileage: 289,000 km, Year of construction: 2017, Field of application: Freight transport Serial number: WDB9066571P53xxxx Please contact ATS Norway for more information Please provide reference number upon request: 21627 Specifications: 2017 model EU-approved until 30.09.2026 Approx. 289,000 km 4x2 190 hp 16+1 seats Wheelchair space Wheelchair ramp Winter tires installed (see pictures) Summer tires can be included for an additional cost LED light bar Rear lights Reversing camera Automatic transmission AC/climate control DAB radio Delivery by agreement Ijdpfxsxq Dggs Ah Neal Description:2017 Mercedes Sprinter minibus 4x2 with 16+1 seats, wheelchair ramp, and wheelchair access.When a wheelchair is in use, there are 12 passenger seats available.Summer tires can be included for an extra charge.Delivery by arrangement. Km: 289000 HK: 190 Technical approved: Yes EU-approved until: 30.09.2026 Own weight: 3645 Total Weight: 5000 Payload: 1280 Width: 199,3 Length: 736,1 Euro: 6 Model: Sprinter minibuss 4x2 m/ 16+1 seter, rullestolrampe og handikap plass. Gearbox: Automatic Number of seats: 17

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 2150x1300x1780 mm Iaedjvz Egyspfx Ah Nol Weight 1000 kg Total power requirement 5,5 kw

Condition: used, mileage: 209,324 km, Year of construction: 2021, Field of application: Freight transport Serial number: W1V9076571P35xxxx Please contact ATS Norway for more information Please provide reference number upon request: 21456 Specifications: Iaedpfx Aexpdg Rjh Nsl 2021 model 209,324 km (I'm going to give you a little bit) 190 hp Automatic transmission Euro 6 engine 16 1 seats Approved for 3 wheelchair users 2 air conditioners 2 Webasto Cow catcher with extra light Air conditioning/ac Rear view camera Seat heating Heated mirrors Bluetooth Light Radio Ready for delivery Description: We have a 2021 Mercedes Sprinter 519 Bus-prestige mb 4x2 sprinter w/ 16 1 seats and 3 wheelchair users for sale. The bus has a new drive axle, brakes and handbrake.  Everything works as it should and services have been carried out at an approved workshop. Ready for delivery Km: 209324 HK: 190 Technical approved: Yes EU-approved until: 04.10.2026 Own weight: 3585 Euro: 6 Model: Sprinter 519 m/ 16+1 seteplasser og 3 rullestolbrukere Gearbox: Automatic Number of seats: 17

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 2650x1400x1700 mm Iaedpfsvz Euwsx Ah Nol Weight 1950 kg total power requirement 11,4 kw

Condition: excellent (used), functionality: fully functional, This is a café setup consisting of: 2 benches, 120 cm long and 64 cm wide, 30 chairs (13 larger and 17 slightly smaller), and 12 tables, each 120 cm long and 60 cm wide (seating group). As new condition. Immediately available. Isder A Hdcjpfx Ah Nsal

Condition: good (used), Code: 0352 Brand: OMW VALENTINI Model: 700 Pit clamp for chairs, for assembling classic, modern, style chairs etc. Technical data: Assembled steel frame Useful pit mm 700 x 700 Iaodpjt Eul Ajfx Ah Nol N° 4 cylinders with adjustable stroke that can be moved on the plane Counterweight Foot pedal for simultaneous operation of the 4 cylinders Compressed air 7-8 atm Overall dimensions mm 1300 x 920 x 750 h Weight kg 700

Year of construction: 1999, condition: used, Roller shutter belts for drying painted products (chairs or similar). Iajdpjxrd Nkofx Ah Nsl 3 ribbons, length 24.5 m, width 4 m 3 Ribbons length 27.5 m width 2.3 m.

Condition: used, Year of construction: 2000, machine/vehicle number: 404, SECOND-HAND CHAIRS LEVELLING MACHINE CAMAM US1C - CE (2000) Ijdpfxowrcx He Ah Noal

Condition: used, Gear motor, electric motor, three-phase motor, electric gear motor Iaodjd I Hixopfx Ah Nsl -Speed: 3700/116 rpm -Power: 0.18 kW 24 V. -Diameter shaft: 17 mm -Length: 45 mm -Weight: 6 kg -Dimensions: 215/170/H420 mm -Weight: 17.3 kg/piece

Condition: new, Unique FIGARO hairdressing salon equipment on wholesale offer - style, quality and comfort in one! Retail purchase value of approx. 180,000 € - retail value 300,000 € Discover the unbeatable range of high-quality salon furniture from FIGARO - your reliable partner for stylish and functional salon furniture. With a total of 5 truckloads of brand new, originally packed goods, we offer you a comprehensive selection of styling chairs, saddle stools, mirrors, roller stools, cosmetic tables, wax heaters, drying hoods, ozone steamers, waiting benches, system workstations, wall showcases and much more. Why choose FIGARO? Exclusive design: Every piece of our salon furniture embodies timeless elegance and modern design. Stand out from the competition and impress your customers with a stylish salon. Highest quality: FIGARO stands for quality, and this is reflected in our carefully crafted furnishings. The products are not only durable, but also designed to meet the needs of professional hairdressing salons. Unbeatable offer: With a regular dealer purchase value of approximately €180,000 (retail value €300,000 ) you will not only receive high quality furniture, but also unbeatable value for money. Take this opportunity to take your salon or store to the next level. Versatile range: From styling chairs for maximum comfort to practical rolling stools and elegant waiting benches - our comprehensive range covers all your salon's needs. The time has come to transform your salon chain! Get your hands on this exclusive wholesale range of FIGARO salon furniture before it's out of stock. Contact us today for more information. Increase not only the attractiveness of your salon, but also your sales with FIGARO! Ijdpeqwlthsfx Ah Nsal Stock lists may vary by 5% You can find more items - new and used - in our store! International shipping costs on request!

Condition: used, Automatic wooden chair painting system, already disassembled and sold in separate pieces: - 3 roller shutter belts, 2.5 metres wide - 3 roller shutter belts, 4 meters wide - 2 painting chains consisting of tracks, chain, towing motor and hangers Isdpfxjxlb E Aj Ah Noal - spray booths - correspondence desks - External suction cyclone - various

Condition: ready for operation (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 1104104, measuring range X-axis: 1,205 mm, measuring range Y-axis: 2,005 mm, measuring range Z-axis: 1,005 mm, workpiece weight (max.): 2,000 kg, workpiece height (max.): 1,115 mm, The measuring table has been supplemented with milled aluminum plates. These plates are equipped with M6 holes in a 50 mm grid pattern, allowing for variable clamping options for workpieces. TECHNICAL DETAILS Measuring range X-axis: 1,205 mm Measuring range Y-axis: 2,005 mm Measuring range Z-axis: 1,005 mm Drive speed in CNC mode Traversing speed: 8–250 mm/s Measuring speed: 1–3 mm/s Drive speed in J/S mode High speed: 0–80 mm/s Low speed: 0–3 mm/s Iodpfxjx U Sv He Ah Njal Fine speed: 0.05 mm/s Acceleration Acceleration per axis: 0.1 G Max. acceleration: 0.17 G Resolution: 0.0001 mm Measuring table Material: Granite Working area: 1,408 mm x 2,980 mm Clamping threads: M8 x 1.25 Max. workpiece height: 1,115 mm Max. workpiece weight: 2,000 kg MACHINE DETAILS Dimensions & Weight Main unit dimensions (D x W x H): 3,230 x 2,150 x 3,585 mm Weight (incl. stand and control unit): 5,388 kg Compressed air supply Air pressure: 0.4 MPa Air consumption in normal operation: 100 L/min Air consumption from air source: 150 L/min Temperature conditions Ambient temperature: 16–26 °C Thermal fluctuation per hour: 2.0 K Thermal fluctuation per day: 5.0 K Thermal gradient vertical: 1.0 K/m Thermal gradient horizontal: 1.0 K/m Accuracy Accuracy to ISO 10360-2: E = 4.9 + 5L/1,000 Probing error Probing error ISO 10360-2 (TP2): R = 5.2 µm Probing error ISO 10360-2 (TP200): R = 5.0 µm EQUIPMENT Geopack Cosmos 2.3 software PH 10 probe head TP 200 Change rack Note: The machine was in operation until 2013, after which it was professionally dismantled by the manufacturer. The machine was then stored in an industrial hall. The last factory calibration was carried out in 2013. The calibration certificate is available as an attachment in the listing.

Condition: used, machine/vehicle number: WDB9046631R77xxxx, mileage: 245,000 km, Year of construction: 2005, Please contact ATS Norway for more information Please provide reference number upon request: 22164 Specifications: Iodpfoyagcdex Ah Noal EU approved until 19.06.2026 Mileage: 245,000 km Transmission: Manual Tail lift, 500 kg Euro 4, 156 3 seats 2 sets of tires Tires (see pictures) Additional lights Maintenance carried out by owner Ready for delivery Description:2005 Mercedes Sprinter.The vehicle is EU approved and ready for delivery.Equipped with a tail lift and sold with 2 sets of tires. Km: 245000 HK: 156 Technical approved: Yes EU-approved until: 19.06.2026 Own weight: 2700 Payload: 725

Year of construction: 2025, condition: new, The KVK 600 is ideal if you are looking for a mobile solution to stretch-wrap your packaged goods. Or if you have packaged goods that are too large or too heavy for a pallet wrapper with a turntable. With its electric steering, the KVK 600 can be easily moved to any corner of your warehouse. Its rechargeable battery is designed for 8 hours of continuous operation. Iodpfx Ahoyaapwe Neal The KVK 600 has a power stretch system with up to 300% stretch. This significantly reduces your film consumption, as 1 meter on the roll becomes 4 meters on the pallet. In addition, this system creates only minimal contact tension, so that even lightweight packaged goods can be wrapped easily. Up to 10 individual programs can also be saved for the KVK 600, in which you can specify for each step (foot wrapping, ascending wrapping, head wrapping and descending wrapping) how quickly and with what film tension they should be carried out. This allows you to store individual programs for each wrapping scheme in order to achieve ever more perfect wrapping results. The programs can be password-protected so that the user can only select from the stored programs. Automatic recognition of your pallets (via photocell) is just as much a matter of course as adjustable head and foot wrapping. In addition to a photocell for the detection of dark packing goods or black film, a higher mast and a set of exchangeable battery and external charger are also available for the KVK 600. This model is our recommendation if you want to use your stretch wrapper on the move, or if you have pallets with excessive dimensions and value absolutely consistent results. For further information, we have attached the technical data sheet as a PDF to this advertisement!

Condition: used, fuel type: diesel, lifting height: 12,550 mm, axle configuration: 4x4, Year of construction: 2019, operating hours: 3,648 h, Equipment: all wheel drive, Year of manufacture: 2019 Empty weight: 9.200 kg Carrying capacity: 3.500 kg Isdjx U U H Ispfx Ah Noal GVW: 12.700 kg Dimensions (LxBxH): 586 x 228 x 242 cm Working height: 1.300 cm Boom radius: 8.75 m

Condition: ready for operation (used), Year of construction: 2014, controller manufacturer: FANUC, controller model: 0i-TD, This 5-axis Star SB-20R type N was manufactured in 2014, featuring a CNC Fanuc 0i-TD, C-axis on both main and sub-spindles, and a 6-position tool holder. It includes a 5-spindle unit for cross drilling, a sub-spindle with a 20mm part picking capacity, and a standalone coolant tank. Ideal for precision small parts production. If you are looking to get high-quality turning capabilities, consider the Star SB-20R type N machine we have for sale. Contact us for more information. Additional equipment • Part ejection safety lock / Part ejection device (spring type) / Blow-off device for guide bushing and sub-spindle / Standalone coolant tank with level monitoring / Probe / Automatic central lubrication unit with level monitoring / Interface for bar feeder / RS232C interface / RJ45 / USB • The machine was used for serial production of small parts with extreme precision from standard relatively soft material. The machine was not dynamically stressed, production was carried out on oil. Service was regular, with almost continuous replacement of bearings, all in perfect condition. • MBC (BROXTEC) chip conveyor / Workpiece conveyor belt / FMB Minimag 3200 bar feeder (⌀ 8) Machine Benefits Technical Machine Benefits • C-axis on the main spindle and sub-spindle • Clamping device on the main spindle and sub-spindle / collet clamping sleeve for main spindle and sub-spindle f25 • 6-position tool holder 12x12mm / 4-position tool holder without drill clamping • Sub-spindle with part picking capacity of 20mm (23mm) Iodpfxex U Ty Tj Ah Neal • 5-spindle unit for cross drilling with driven tools / drive unit for driven tools for rear-side machining with 4x er16 drill holders /tool breakage safety device Extra Information 4 machines are available

Year of construction: 2025, condition: new, New machine Year of manufacture: 2025 Features and technical specifications: Isdpsw Nafksfx Ah Noal Fully equipped in standard version with: - Robust, torsion-free steel frame, welded and bolted construction - Lamella pressure beam TOP with 6 elements, lamella pressure beam SIDE with 5 elements - Lamella pressure beams with proven tolerance compensation system (Ganner system) for tightly compressed carcass joints - Counter-pressure surfaces (side pressure wall, base) are 38 mm thick, coated, continuous support plates - Continuous pressing surface, height 95 mm, on lower vertical pressure beam - Electromechanical adjustment of both pressure beams via precision trapezoidal thread spindles (with increased lead and concentricity accuracy) and high-performance ball nuts with grease reservoir - The pressing process is carried out electromotorically, via 2 independent worm gear motors (2 x 0.75 kW) - Pressing force of the pressure beams is infinitely variable and electronically controlled by 2 potentiometers, regulated via frequency inverter, ensuring absolutely wear-free force control - Pressing force for horizontal pressure beam: min. 500 daN (kg), infinitely adjustable up to max. 2200 daN (kg) - Pressing force for vertical pressure beam: min. 300 daN (kg), infinitely adjustable up to max. 2200 daN (kg) - Pressing and adjustment speed of the beams with fine positioning, using 3-stage selector switch: 5 / 10 / 25 mm/second - Jog mode for precise positioning of both pressure beams, e.g. for low pressing forces, drawers, and carcasses at 45° - Simplest operation via 6 separate push buttons, 8 movement cycles selectable via control panel - Freely adjustable press time preselection 0-30 min (switchable to seconds or hours), with individually programmable opening dimensions for both pressure beams - Re-pressing function to increase or decrease the pressing force during the pressing process - Working height/loading height: 300 mm - Working dimensions: Length min: 150 mm, max: 2500 mm; Height min: 150 mm, max: 1400 mm; Depth: 700 mm Including surcharge for rapid traverse speed, for fast positioning of the pressure beams, controlled via automatic workpiece detection with sensors in the pressure beams, pressing speeds 5 / 10 / 25 mm/sec and rapid traverse speed 50 mm/sec, the sensors can be deactivated for pressing special components Including a set of machine feet for 500 mm working height Location: Flörsheim Availability: Short-term

Condition: used, Year of construction: 2016, MORBIDELLI AUTHOR M400 MAIN FEATURES 5-AXIS MACHINING UNIT "PRISMA: QUALITY AND PRODUCTIVITY AT THE HIGHEST LEVEL XILOG MAESTRO SOFTWARE: EXTREMELY SIMPLE MATIC PROGRAMMING" WORKTABLE: ONE POSITIONING FOR MULTIPLE MACHINING OPERATIONS TECHNICAL DATA AUTHOR M400 AXES Working area X-axis (inside stop) mm 3,680 Working area Y-axis (max. loadable piece on rear stops) mm 1,680 Workpiece passage Z / number of Z axes mm 170 / 1 Workpiece length with pendulum machining mm 1,650 Travel speed X-Y axes Pro-Speed m/min 85 Z-axis speed m/min 30 INSTALLATION Installed power KVA 62÷82 Compressed air requirement NL/min 400 Extraction air requirement m³/h 4,430 Extraction air speed m/s 25 Extraction nozzle diameter mm 250 GENERAL CHARACTERISTICS CNC-controlled drilling and milling center in gantry design and work table with workpiece supports, for carrying out: - vertical drilling on the panel surface - horizontal drilling on all four sides of the workpiece - groove milling with disc milling cutters - general milling work 3-4-5 axes MACHINE STRUCTURE The basic structure is a monolithic construction made of thick-walled steel. It is stiffened by welded reinforcements across the entire machine bed, making it extremely stable. The table shape used, with a large base, is the secret to ensuring lasting precision and stability. The machine layout allows the user optimal workflow with a minimum of space requirements. The mobile gantry support is made of a solid monoblock. It is positioned in the X direction on prismatic ground guides via recirculating ball slides. On this mobile unit carrier, the work unit is mounted on prismatic, ground guides and recirculating ball slides. All axes are moved on large-section prism linear guides and recirculating ball bearings with a large contact surface, ensuring optimal gliding even at the highest speeds and accelerations. Precise and rapid positioning of the movable gantry (X-axis) is achieved by a pinion and rack with helical teeth. Large-section recirculating ball screws ensure precise positioning of the work unit along the movable gantry (Y and Z axes). MOTORS, DRIVES AND INVERTERS Perfect mechanical dynamics and maximum positioning accuracy are controlled by high-quality drives and brushless motors, designed to achieve speeds of up to 90 m/min while ensuring the best finishing quality. CONTROL The control unit consists of a numerical control for milling and drilling machines with "Xilog Maestro" graphical user interface based on the Windows 7 Office operating system. 17-inch LCD color screen. QWERTY keyboard. Tilting control panel. Machine interface with Xilog Maestro software. Xilog Maestro Features Programming Parametric graphic programming Import of DXF files (2D; SPLINE, POLYLINE 3D geometries), linear or circular interpolation in three axes, linear in space, spiral in the selected plane. Programming with graphic and syntax aids for drilling and milling operations Automatic optimization of drilling operations and tool change cycles Possibility of Plate zero point shift for drilling on inclined or curved plate sides Iaedpfxsxnldbs Ah Nol

Condition: used, machine/vehicle number: 35xxxx, Year of construction: 1999, CE mark: yes Please contact ATS Norway for more information Please provide reference number upon request: 22151 Specifications: Model Year: 1999 Operating Hours: Unknown Power: 183 kW Maximum Permitted Gross Weight: 44,550 kg Drivetrain: 6x6 Differential Lock: Yes Ijdsyagdnjpfx Ah Noal Tipping Function: Yes Tyres: See pictures Air Brakes: Yes Body Heating: Yes Articulated Steering: Yes Air Conditioning: Yes Radio: Yes Lights: Yes Ready for Delivery: Yes Description: We have a 1999 Moxy MT30R dumper for sale. The machine has reduced braking performance on one axle. Apart from this, it operates as expected according to the owner. Regular servicing has been carried out by the owner. The engine operating hours are somewhat unknown. The machine is ready for delivery. Own weight: 14000 CE: Yes Model: MT30R

Condition: good (used), axle configuration: 3 axles, first registration: 11/2017, loading space volume: 90 m³, suspension: air, color: yellow, Year of construction: 2017, Make axles: SAF Brakes: disc brakes Suspension: air suspension Empty weight: 7.300 kg Carrying capacity: 31.700 kg Iaedpfsx Emkmex Ah Njl GVW: 39.000 kg Technical condition: good Visual appearance: good Please contact Arie or Pedro for more information

Condition: used, Year of construction: 2019, operating hours: 1,758 h, Year of manufacture: 2019 Iaodpfxox U U Hzj Ah Nol Field of application: Mining Carrying capacity: 1.500 kg