Used Carrugated Cutting for sale (13,812)

Condition: good (used), Thread cutting head with Strehler jaws, thread cutting die, Thread cutting machine, pipe thread cutting -inch thread jaws: 1"- 2" inch Lodpjb A Rltsfx Affsta -Weight: 12 kg

Condition: used, Year of construction: 2012, TRUMPF TruLaser 5040 6kW Laser, manufactured in 2012 in Germany by TRUMPF Maschinen Grüsch AG. The machine has been continuously serviced, upgraded, and maintained throughout its entire operation period. The TRUMPF TruLaser 5040 (L18) laser cutting machine is designed for precise cutting of sheet metal made from materials such as steel, aluminum, copper, and brass. Laser cutting is performed using a stable 6 kW laser beam generated by a high-efficiency resonator. A range of additional systems streamline the machining process while enhancing cutting quality. The entire cutting process is fully automated, thanks to the automatic pallet changer system. This system enables simultaneous loading and unloading of workpieces during operation, thus increasing productivity and minimizing machine downtime. The TruLaser 5040 is offered with extensive equipment, including additional cutting heads and an advanced CNC controller with many useful features. In September 2022, the complete set of quartz tubes, all internal optics, and the lamp were replaced. The external optics were cleaned and calibrated in September 2025. Filters and oils were changed according to TRUMPF’s recommendations. Once a year, the water was changed along with flushing the CU and AL circuits. All these procedures are documented with proper service reports. Both original lenses for both heads and an optics case are supplied with the machine. Technical specifications of the TRUMPF TruLaser 5040 laser cutting machine: - Laser power: 6 kW - Travel (X/Y/Z axes): 4000/2000/115 mm - Maximum cutting thickness (mild steel): 25 mm - Maximum cutting thickness (stainless steel): 25 mm - Maximum cutting thickness (aluminum): 25 mm Ltedpfxsx Nil Io Affsa - Maximum cutting thickness (copper): 10 mm - Maximum cutting thickness (brass): 10 mm - Operating hours: 51,839 h - Machine on-time: 79,497 h - Compressed air connection: 7-10 bar - Nitrogen (N2) supply: 30 bar - Oxygen (O2) supply: 20 bar - Connected load: 120 kVA - Machine power supply: 400 V; 50 Hz TRUMPF Laser Cutter Equipment: - CNC control: TRUMPF - Laser source: TRUMPF TruFlow 6000 - BrightLine system (improves quality of thick sheet cutting) - FlyLine system (fast hole cutting in thin sheets without pre-piercing) - PierceLine system (monitors and controls piercing process, reducing duration by up to 80%) - 250 mm cutting head - 175 mm cutting head - Automatic pallet changer system - Cutting with compressed air, nitrogen or oxygen - Longitudinal conveyor belt

Condition: used, functionality: fully functional, Year of construction: 2015, controller manufacturer: Siemens, controller model: Sinumerik 840 D, laser power: 4,000 W, sheet thickness steel (max.): 20 mm, sheet thickness stainless steel (max.): 20 mm, sheet thickness aluminum (max.): 20 mm, table length: 3,000 mm, table width: 1,500 mm, table height: 115 mm, Standard Equipment Machine - Enclosed machine frame - Integrated cabinet - Torque drive in combination with linear direct drives - Enclosed beam guide via laser light cable (LLK) - Cooling unit - Integrated control cabinets with internal lighting - Automatic pallet changer (longitudinal direction) - Longitudinal conveyor belt - Work area lighting - Positioning laser diode - Spray device - PierceLine - FocusLine - NitroLine - PlasmaLine - Automatic nozzle cleaning TRUMPF Laser - Integrated solid-state laser TruDisk 4001 with one LLK outlet - Excitation via pump diodes - Laser power control Cutting Head - Universal cutting unit - Single cutting head strategy - Protective glass against lens contamination - Online condition monitoring of the protective glass - ControlLine: height control and sheet edge detection Control System - Simple shopfloor programming - Fast reproduction (repeat production) - SINUMERIK 840D SL controller - 17" color touchscreen display - Integrated technology data - Auto-off function - Programmable selection of cutting gas/pressure - ContourLine - Microweld - FastLine - AdjustLine - FlyLine - Integrated e-shop Data Transfer - USB interface - RJ-45 network connection Safety - CE marking - Light barriers - Multi-chamber extraction system - Compact dust extraction system Lodpfx Aex Nhu Usffota - Machine enclosure, certified viewing window, door on right - Sliding roof Extended Equipment Extended Machine Equipment - Nozzle changer - Copper cutting package (includes cutting data) - Brass cutting package (includes cutting data) - DetectLine: precise sheet layer detection Options for Compact Dust Extractor - Connector for exhaust air duct (compact dust extractor) RotoLas - Tube cutting device including jaw type 3 - includes electric roll-up roof and viewing window door on left for extended visibility (note: integrated cabinet in machine is omitted) - Trolley for RotoLas accessories (as integrated cabinet is omitted) - Automatic chuck - Additional base support - Foot switch for automatic chuck - External support (for tubes/profiles up to 6 m)

Year of construction: 2007, condition: ready for operation (used), General Data Measurements width 2400 mm Measurements depth 3600 mm Measurements height 1350 mm Machine weight 2150 kg Main Drive Laser power 18,5 KW Laser type CO2 Lsdpfxox H A I Ds Affota Laser brand ROFIN Laserquelle ScX30 Additional Equipment filter system is included This SEI MERCURY 603 1520 350W Laser cutting machine was manufactured in the year 2007 in Italy. The machine has a laser power of 18,5 kW. Application Types Cutting

Condition: new, Year of construction: 2026, Forstner COILFARM Ltjdpfx Afox Ngumjfea The COILFARM by FORSTNER is a new, innovative, and adaptable solution designed to meet the changing market demands for rapid, flexible availability of a wide variety of materials in different thicknesses and color variants. This is one of the main reasons why we have developed the COILFARM, specifically for metalworking companies in trade and industry. Key Advantages High Capacity: With a storage capacity of up to 75 coils, a wide range of different materials, thicknesses, and color variants can be accessed immediately and without delay. This allows for the effortless handling of large-scale, simultaneous projects. Fast Coil Changeover: Thanks to a sophisticated system, coil changes are performed quickly, easily, and safely. We've integrated a coil buffer station above the nuSLIT as well as a changeover buffer station behind the decoiler. This significantly reduces changeover times and greatly increases overall production efficiency. Simple Loading Process: The well-thought-out machine design makes the loading process of the COILFARM extremely simple. The mandrels can be easily attached to the coil, and loading via the setup station increases your productivity. Maximum Precision: The integrated zero-line alignment (fixed edge) ensures that materials are perfectly aligned every time. This minimizes errors and scrap. Uncompromising Quality: Products from the CIDAN Machinery Group are manufactured without compromise. Our guiding principle in developing the COILFARM was to bring form and function into perfect harmony. 3-Minute Changeover: Stop and rewind, move the coil to the transfer position behind the decoiler, pick up the next coil above the nuSLIT, feed it in first and then set it on the decoiler—and the production is back at full speed. Coil weight: 5,000 kg Min. coil width: 400 mm Max. coil width: 1,270 mm Max. coil diameter: 1,100 mm Coil inner diameter: 380 – 550 mm Optional coil diameter: 460 – 630 mm Slitting capacity (with nuSLIT): 1.00 mm steel with 5 knife pairs Cross-cutting capacity (with nuSLIT): 1.0 mm steel Steel (400 N/mm²): 1.00 mm with 5 knife pairs Stainless steel (600 N/mm²): 0.80 mm with 5 knife pairs Aluminum (300 N/mm²): 1.20 mm with 5 knife pairs Max. storage capacity: 75 coils (with maximum diameter)

Condition: good (used), Iijima’s excellent, fast-running JF-1030, year of manufacture 1991, modified to Bobst stripping tooling Machine number: 8061 Year of manufacture: 1991 Stripping station made compatible for/with Bobst stripping pins and mounting rails Sector segment now driven by a dual set of cam gears instead of the previous triple system, resulting in smoother and vibration-free improved carriage operation. Chains replaced in May 2023 Gripper carriages have been repaired where needed but not replaced; current register tolerance at the front lay with rigid board types is < 0.15mm Electromagnetic clutch (24 VDC, Warner) replaced in May 2023, as well as all roller bearings on this shaft, including those in the casing just before and after the worm gear. Oil seals replaced Oil casings flushed and thoroughly cleaned for conversion from mineral to fully-synthetic oil. Absolutely no foaming, quieter operation. Dismantling as of 23/12/2025; then available for sale ex-warehouse Van Rooij For the end user: can be supplied including installation, transport, and warranty. Other specs according to manufacturer’s brochure; Technical Specifications – Flatbed Die Cutting Machine Materials - Paper from 80 g/m² - Solid fibre board / cardboard up to 2000 g/m² - Corrugated board up to 4 mm, depending on material quality and cutting layout Sheet Sizes & Formats Ltsdsx Ndu Djpfx Affsa - Maximum sheet size: 750 × 1050 mm - Minimum sheet size: 350 × 400 mm - Maximum cutting form size: 745 × 1070 mm - Maximum cutting surface: 730 × 1030 mm - Inside chase dimension: 750 × 1050 mm Performance - Maximum cutting pressure: with maximum sheet size - Maximum speed: up to 5,000 sheets/hour - Gripper margin: adjustable - Standard rule height: 8 – 12 mm Pile Data Feeder pile: - Height (incl. pallet): 1,200 mm - Weight (incl. pallet): 1,000 kg Delivery pile: - Height (incl. pallet): 1,080 mm - Weight (incl. pallet): 1,000 kg Auxiliary piles: - Feeder auxiliary pile height: 450 mm - Feeder auxiliary pile weight: 450 kg - Delivery auxiliary pile height: 800 mm - Delivery auxiliary pile weight: 800 kg Machine Dimensions & Weight - Length without feeder: 4,540 mm - Length with feeder: 5,810 mm - Width: 2,350 mm - Height: 2,100 mm - Machine weight: 15,000 kg - Feeder weight: 1,000 kg Electrical & Air Requirements - Power supply: 3-phase AC - Main motor output: 15 kW - Machine connected load: 32.4 kVA - Required compressed air: 6 bar - Air intake volume: approx. 30–50 l/min Additional Information - Heavy-duty industrial construction - Designed for continuous professional die-cutting production - Specifications subject to alteration

Condition: good (used), Thread cutting head with Strehler jaws, thread cutting die, Thread cutting machine, pipe thread cutting -inch thread jaws: 1/4" - 1 1/2" inch Lodpfx Afeb A Rlrofjta -Weight: 8 kg

Condition: used, Year of construction: 2004, functionality: fully functional, Perfecta Trimmstar 110, age 2004 Equipped with: • suitable for: three side trimming of book blocks and brochures Ljdpfsx Ndpzox Affjta • works in-line connection with book production lines or manual feeding • standard equipment • touchscreen • Max. size trimmed 300 x 440 mm • Min. size trimmed 100 x 125 mm • Size (untrimmed) Max. 320 x 460 mm; Min. 85 x 115 mm • Capacity: max. 110 cycles/min

Condition: good (used), Year of construction: 2003, Kongsberg XL22 Lsdex Hz Tropfx Affjta Max. working area: approx. 2170 x 1650 mm Overall dimensions: approx. 3.70 x 2.45 m (with traverse) or 3.70 x 1.90 m without Includes: "Powerhead", VibKnife, creasing wheel d: 150mm, ballpoint pen, crushertool

Year of construction: 2014, condition: ready for operation (used), Additional Equipment Bundleloader: 6.5 meters Ltsdpfxsx H A Rxj Affsa Steploader: 6.5 meters Output with Conveyor Belt: 6.5 meters at the front, 4.5 meters at the back This BLM Adige LT8 4kW Co2 was manufactured in 2014. It features a Rofin DC035 3.5kw laser source and is equipped for tube cutting with a 3D cutting head. It handles materials up to 12mm thick and 206mm round, with lengths up to 6500mm. Consider the opportunity to buy this BLM Adige LT8 4kW Co2 tube cutting machine. Contact us for more information about this machine. Application Types Cutting

Condition: good (used), Year of construction: 2019, Type: Gammatec 2040 Machine number: KE2019010 Cutting size: 4,000 x 2,000 mm Ltjdpfx Asx Ndpnjffsa Max. sheet thickness: 30 mm Number of torches: 1 Control: Kjellberg Finsterwalde HiFocus 280i / PGV 3-440 / KWE 360 Connection: 2 kVA Cooling type: Equipment: Dimensions: 5,000 x 2,400 x 1,000 mm Weight: approx. 4 t

Condition: excellent (used), Catalogue number 7804 TECHNICAL DATA - Track width: 350mm - Shaft width: 330mm - Mounted blade: 300mm - Max blade diameter: 400mm - Blade bore diameter: 70mm - Max cutting height with 400mm blade: 150mm - Table dimensions: 2240x770mm – From above: - kickback/retractors - slip roller - retractors - smooth slip roller - shaft with saw blades - 2 slip and pressure shafts – From below: - roller in front of the table - guide - pawls - track - central track lubrication - electric raising of saw blade shaft 0.75kW - electric raising of machine body 0.75kW - variable feed speed adjustment - Extraction nozzle diameter: 320mm - Main motor: 45kW - Overall dimensions (L/W/H): 2280x1820x2040mm - Weight: 2850kg Ltsdpfxoxvb S Rs Affsa ADVANTAGES – Czech production – Used multi saw machine – Technical documentation (DTR) – Very good condition Net price: 62,900 PLN Net price: 14,970 EUR depending on EUR rate 4.2 (Prices may change with significant fluctuations)

Condition: good (used), Thread cutting head with Strehler jaws, thread cutting die, Thread cutting machine, pipe thread cutting -inch thread: 1" - 2" inch -Transport crate -Weight: 17 kg Ledpfx Asb A Nixjffeta

Condition: ready for operation (used), Year of construction: 1989, Saw blade Ø: 350 mm Cutting capacity: at 90° & 45°, round: 120 mm at 90°, flat: 170 x 100 mm at 45°, flat: 120 x 100 mm at 90°, square: 100 mm at 45°, square: 95 mm 2 saw blade speeds: 17/34 rpm Drive motor: 400 V, 2/2.6 kW Weight: 425 kg Required space: 900 x 800 x 1800 mm Ljdoxln Ukepfx Affjta

Year of construction: 2004, condition: used, controller manufacturer: SIEMENS, pipe diameter (max.): 90 mm, wall thickness: 8 mm, CONTROLS .. SIEMENS FEEDSTOCK TUBE .. external diameter min.: 10 mm .. external diameter max.: 90 mm .. wall thickness min.: 0.8 mm .. wall thickness max.: 8 mm .. length min.: 150 mm .. lenght max.: 3000 mm Lsdpexvn Sdsfx Affota Rattunde tube cutting machine equipped with an integrated brushing unit for deburring/cleaning, a washing unit for part cleaning, and an automatic stacking unit.

Condition: used, Year of construction: 2008, BOTTERO 535 AVM-37 – Year 2008 Laminated Glass Cutting Table Ltedpfsx Hwausx Affsa Max Cutting Length: 3700 mm Thickness: Float: 3-8 mm Laminated (2+2) (8+8) mm Power: 23 kW + BOTTERO 100 BLM – Year 1998

Condition: new, functionality: fully functional, Year of construction: 2024, machine/vehicle number: 50, laser power: 12,000 W, sheet thickness steel (max.): 100 mm, total length: 125,000 mm, warranty duration: 60 months, GX(Pro) Double Exchange Platform Sheet Fiber Laser Cutting Machine. Working platform size: 3048mm*1524mm, 4064mm*2040mm, 6096mm*2540mm, 12500mm*2540mm; Laser source power: 3000 - 40000W Optional function: automatic loading and unloading system Ltsdperuz Uusfx Affoa

Condition: new, Year of construction: 2021, functionality: fully functional, total height: 5,400 mm, total length: 8,300 mm, total width: 2,300 mm, warranty duration: 12 months, input voltage: 380 V, input frequency: 50 Hz, Machine for squaring blocks and cutting slabs and thick slabs, featuring a heavy-duty, arc-welded steel structure, which is heat treated to ensure the required stiffness of the system and a top cutting precision. Extremely user-friendly, the machine is provided with a control console with touch-screen housed in the electric cabinet and a mobile button panel to actuate the main working axes. Lodpfx Ajtwww Hsffjta The machine needs to be adapted for different voltages and frequency. The machine is not available for North America.

Condition: good (used), Thread cutting head with Strehler jaws, thread cutting die, Thread cutting machine, pipe thread cutter -inch thread: 3/8" - 1" inch -In the transport case -Weight: 5 kg Lodpeb A Rlvjfx Affota

Condition: refurbished (used), functionality: fully functional, workpiece length (max.): 3,400 mm, workpiece width (max.): 1,800 mm, workpiece height (max.): 200 mm, table width: 2,300 mm, table height: 1,800 mm, table length: 4,500 mm, table load: 500 kg, input voltage: 400 V, power: 30 kW (40.79 HP), input frequency: 500 Hz, 5-Axis Waterjet Cutting Center equipped with: - integrated working tank - 4.200 bar full electric e-drive™ - 19” numerical control - abrasive pressurized tank - cutting head - watercad-cam software accessories included Ledoxbgvfopfx Affota - 5 axis ±55° interpolating system and touchwave ce-ramic™ - loading and unloading system - light laser barriers Included expenses: - Installation of the machine(s) - Machine full-load start-up - Practical training to BUYER’S staff on the machine functions

Condition: good (used), Thread cutting head with Strehler jaws, thread cutting die, Thread cutting machine, pipe thread cutter Ltedpjb A Rlujfx Affja -inch thread: 1/2"-3/4" inch -Weight: 6 kg

Condition: good (used), Thread cutting machine, pipe thread cutter Ltsdpfxob A Iwcj Affoa -for: Pipe size max. 2 inches -Cutting jaws: 2" inch -Drive: via 3 gearboxes -Dimensions: 550/360/H240 mm -Weight: 55 kg

Condition: good (used), Thread cutting machine, pipe thread cutter -for: Pipe size max. 2 inches Lsdpfxob A Iyaj Affeta -Cutting jaws: 1" inch -Drive: via 3 gearboxes -Dimensions: 550/360/H240 mm -Weight: 55 kg

Year of construction: 1999, condition: good (used), Multifunctional punch, punch press, hole punch, pneumatic hole punch -operated: pneumatically Ltodpfx Asb A N T Hoffoa -Year of manufacture: 1999 -Dimensions: 600/600/H1300 mm -Weight: 50 kg

Condition: good (used), Thread cutting machine, pipe thread cutter -for: Pipe size max. 2 inches -Cutting jaws: 1" inch -Drive: via 3 gearboxes -Dimensions: 550/360/H240 mm Ltodpfx Afeb A Rzwsfoa -Weight: 60 kg