Used Carriage Motors for sale (25,828)

Condition: reconditioned (used), 1 pair of flat motors well suited for pre-cutting circular saws in front of log band saw systems, one right-hand thread and one left-hand thread, for continuous power 5.5 kW, with new ball bearings, with steel brackets for mounting Cajdpsuqk Azofx Ab Tsa

Condition: used, Drum motors for conveyor belts Belt width 500mm Caodpfx Abouck E Ss Tsa Dm 220 x600 mm; 0.75 kW; 0.4 m/s DM 320 x 600 mm; 1.5 kW; 0.4 m/s

Condition: used, Year of construction: 1998, functionality: fully functional, Used, complete, fully functional block wagon ARTIGLIO CI700 with 6 hydraulic clamps including drive unit. The wagon can be inspected at any time by prior appointment. Cjdpfx Abjxbpc Ij Tsaa

Condition: used, Chassis with friction wheel drive for DEMAG lightweight crane system, suitable for crane rails made from system profiles type KBK 2 and KBK II L. Type: DRF 200-B14-1-43, serial no.: 45950995. Travel speed: approx. 40 m/min = 0.67 m/sec. Motor power: 0.37 kW. Power supply: 400 Volt, 50 Hz. Drive motor: DEMAG, type ZBA 71 A2 B007. KBK 2 / KBK2L trolley for suspension in crane track. Wheel diameter: 82 mm, wheel width: 21 mm, trolley width: 78 mm. Csdpfx Ajw Nxyysb Teaa Space requirement (L x W x H): 410 x 320 x 470 mm. Weight: 28 kg. In good condition.

Condition: ready for operation (used), Year of construction: 2021, A total of 12 low-voltage motors are available, 4x SIMOTICS SD 1LE5 and 8x SIMOTICS SD 1LE1. (1) SIMOTICS SD 1LE5, Motor type: Three-phase asynchronous motor, low voltage, cast iron housing, Severe Duty series SIMOTICS SD (model range 1LE5), protection class: standard IP55, insulation class: Class F, operating mode: continuous duty S1 according to IEC/DIN EN 60034-1, environment: -20°C to 40°C, up to 1000m above sea level. (2) SIMOTICS SD 1LE1, rated voltage: standard voltages, operating mode: continuous duty S1, housing: cast iron (Severe Duty), cooling: self-ventilated, insulation class: F (temperature class 155 / utilization B), speed range: 750-3600/min, max. rated torque: approx. 1703 Nm. The motors are still unused, the year of construction is 2021/22. An on-site inspection is possible. Cedpfxsw Tc Rwo Ab Toaa

Condition: used, Fork carriage Codpfot S Rv Dex Ab Teaa ISO class: ISO class 3 = 2,500 - 4,999 kg Technical condition: very good Description: Mast type Triplex Carriage class 3A (51 cm) Width 1120 mm Dimension inside 415 mm Dimension outside 475 mm Height 635 mm ID OS975

Condition: used, Complete Carriage Galileo VS including Spinner and Data-Floppies.Out of a well working Galileo. Casdobwg T Topfx Ab Tea

Condition: good (used), Indoor crane, crane, push carriage, crane running gear, crane undercarriage, girder carriage, headcarriage for bridge cranes, ceiling crane headcarriage, headcarriage single girder bridge crane -Friction wheel Demag type: RF180 -Carrier width: 120 mm -Load capacity: 2000 kg -Number: 2x drives available -Price: complete -Dimensions: 2550/320/H350 mm Cedpfxedc Ipmj Ab Toaa -Own weight: 500 kg

Condition: used, Milling units for rounding on edge trimming machines or milling motors, including top/bottom and left/right radius cutters, Perske type KNS 21 05/2. Disassembled from a working machine but untested. Caedpfxewuuble Ab Tsa

Condition: used, Miter cross-cut saw for aluminum (special machine construction with 4 servo motors) Circular saw, miter saw, rip saw year of construction 2002 Saw blade diameter 500 mm Sawing range at 90° round Ø 180 Rectangle 350 x 140 mm (through longitudinal cut) Sawing range at 45° round Ø 180 Rectangle 350 x 100 mm (through longitudinal cut) Guide length of base support 1100 mm Travel on the base support (forwards and backwards) 650 mm Travel on the stand (up-down) 120 mm Saw blade speed approx. 3000 rpm Motor power 2.2 kW Mains connection 400 Volt, 50 Hz - Controlled longitudinal cutting movement - Controlled saw blade height adjustment - Controlled mitre cut through swivelling saw unit - Controlled miter cut by tilting saw unit - Pivoting and tilting of the saw via INDRAMAT servomotors with precision gears (MKDO71B-061-KG1-KN and MKDO41B-144-KP1-KN motor) - Vertical axis movement via INDRAMAT servomotors and ball screws (MKDO41B-144-KP1-KN motor) - a total of 4 Indramat servomotors are installed - very good German mechanical engineering Space requirement L x W x H 1150 x 1100 x 1400 mm weight approx. 360 kg good condition Codpodzp T Djfx Ab Teaa The unit comes from a special machine for special products. All other components and electrical parts for the construction of a new special machine are also available.

Condition: used, functionality: fully functional, load capacity: 5,000 kg, Fork carriage ISO class: ISO class 3 = 2,500 - 4,999 kg Condition: Ready for use and fully functional Cedpfxjw Erlcj Ab Tjaa Technical condition: Very good Description: ISO 3A (51 cm), capacity 5,000 kg, width 1,350 mm. To enlarge the width of the original fork carriage, can also be supplied to increase the lost load centre and as an adapter fork carriage between the forklift truck and other attachments. ID OS1670

Condition: good (used), Indoor crane, crane, push carriage, crane running gear, crane undercarriage, girder carriage, headcarriage for bridge cranes, ceiling crane headcarriage, headcarriage single girder bridge crane Caedpodc Iplefx Ab Tja -Handover in the current condition as viewed -1x wheel missing (photos) -Friction wheel Demag type: 13/8RF8-2 -Carrier width: 120 mm -for narrow flange beams: IPE240 (120 mm wide) -the chassis are inserted into a steel beam -Load capacity: 2000 kg -Number: 2x drives available -Price: complete -Dimensions: 2550/320/H350 mm -Own weight: 500 kg

Condition: used, functionality: fully functional, load capacity: 2,000 kg, Fork carriage ISO Class: ISO Class 2 = 1,000 - 2,500 kg Condition: Ready for use and fully functional Technical condition: good Description: LINDE 1120 TRIPLEX Sideshift Dimensions: Inside 225 mm Outside 285 mm Length 680 mm Caedpfx Abew Erdfe Tsa

Condition: used, functionality: fully functional, load capacity: 2,000 kg, Fork carriage Condition: Ready for use and fully functional Cajdpfx Aew Eglwob Tea Technical condition: good Description: LINDE 1120 TRIPLEX with sideshift. Dimensions: Inside 225 mm, Outside 285 mm, Length 680 mm

Condition: used, functionality: fully functional, load capacity: 2,000 kg, Fork carriage Condition: Ready for use and fully functional Technical condition: good Description: LINDE 1120 TRIPLEX with sideshift. Dimensions: Inside 225 mm, Outside 285 mm, Length 680 mm Caedpfx Abew Eglqs Toa

Condition: used, functionality: fully functional, load capacity: 2,000 kg, Fork carriage Condition: Ready for use and fully functional Technical condition: good Description: LINDE 1120 TRIPLEX with sideshift. Dimensions: Inside 225 mm, Outside 285 mm, Length 680 mm Cajdsw Eglkopfx Ab Tja

Condition: used, functionality: fully functional, load capacity: 2,000 kg, Fork carriage Condition: Ready for use and fully functional Cajdow Egldspfx Ab Tea Technical condition: good Description: LINDE 1120 TRIPLEX with sideshift. Dimensions: Inside 225 mm, Outside 285 mm, Length 680 mm

Condition: used, functionality: fully functional, load capacity: 2,000 kg, Fork carriage Condition: Ready for use and fully functional Technical condition: good Description: LINDE 1120 TRIPLEX with sideshift. Dimensions: Inside 225 mm, Outside 285 mm, Length 680 mm Cedpfx Abjw Egk Tj Toaa

Condition: used, functionality: fully functional, load capacity: 2,000 kg, Fork carriage Csdpfxsw Egk He Ab Tsaa Condition: Ready for use and fully functional Technical condition: good Description: LINDE 1120 TRIPLEX with sideshift. Dimensions: Inside 225 mm, Outside 285 mm, Length 680 mm

Condition: used, functionality: fully functional, load capacity: 2,000 kg, Fork carriage Condition: Ready for use and fully functional Cedpfx Abow Egkye Tsaa Technical condition: good Description: LINDE 1120 TRIPLEX with sideshift. Dimensions: Inside 225 mm, Outside 285 mm, Length 680 mm

Condition: used, functionality: fully functional, load capacity: 2,000 kg, Fork carriage Condition: Ready for use and fully functional Casdpfx Abow Egkto Tja Technical condition: good Description: LINDE 1120 TRIPLEX with sideshift. Dimensions: Inside 225 mm, Outside 285 mm, Length 680 mm

Condition: used, functionality: fully functional, load capacity: 2,000 kg, Fork carriage Condition: Ready for use and fully functional Codpfx Asw Egkmob Teaa Technical condition: good Description: LINDE 1120 TRIPLEX with sideshift. Dimensions: Inside 225 mm, Outside 285 mm, Length 680 mm

Condition: used, functionality: fully functional, load capacity: 2,000 kg, Fork carriage Condition: Ready for use and fully functional Caodpfew Egkaox Ab Toa Technical condition: good Description: LINDE 1120 TRIPLEX with sideshift. Dimensions: Inside 225 mm, Outside 285 mm, Length 680 mm

Condition: used, functionality: fully functional, load capacity: 2,000 kg, Fork carriage Condition: Ready for use and fully functional Codpfx Ajw Dwu Hsb Tsaa Technical condition: good Description: LINDE 1120 TRIPLEX with sideshift Dimensions: Inside 225 mm Outside 285 mm Length 680 mm

Condition: used, functionality: fully functional, load capacity: 2,000 kg, Fork carriage Condition: Ready for use and fully functional Technical condition: good Description: LINDE 1120 TRIPLEX with sideshift Dimensions: Inside 225 mm Outside 285 mm Length 680 mm Casdpfjw Dwuyox Ab Tea