Used Camp Ground for sale (2,155)

Condition: used, 113m³ above-ground steel tank on steel supports Diameter: 3.10m Length: 15m Cylinder wall thickness: 8mm Front wall thickness: 12mm The tank has a hole in the top (visible in the photo), which we will weld. The following optional additions to the tank are priced separately: Applying an state hygiene institution approved coating A DN50 float valve, or a DN100 float valve, including installation. The price depends on the float valve diameter. Rcsdpfxjw El Dls Ahcof We have our own specialized trailer. Delivery costs depend on the destination.

Condition: good (used), Year of construction: 2017, operating hours: 494 h, functionality: fully functional, machine/vehicle number: 27026757, type of input current: three-phase, total height: 510 mm, total width: 300 mm, total length: 706 mm, input voltage: 400 V, ground cable length: 5,000 mm, overall weight: 100 kg, type of cooling: water, hose package length: 1,200 mm, electrical fuse: 35 A, open-circuit voltage: 73 V, welding current at 60% duty cycle: 360 A, welding current at 100% duty cycle: 320 A, input current: 26 A, protection type (IP code): IP23, welding current (min.): 3 A, welding current (max.): 400 A, input frequency: 60 Hz, Equipment: type plate available, Fronius TPS 400i Pulse MIG/MAG welding system – complete with accessories For sale: Fronius TPS 400i Pulse professional MIG/MAG welding system, complete with wire feeder, mobile stand, and a comprehensive set of accessories. The Fronius TPS 400i Pulse is a professional welding machine suitable for a wide range of MIG/MAG applications. The machine features pulse welding and the ability to record welding data (datalogging). This datalogging is a built-in function of the welding machine and is not a separate accessory. Included with the machine: Rjdpfxozwhpro Ahcjcf - Fronius TPS 400i Pulse - Fronius wire feeder, without stand - Sturdy mobile stand for the power source - 1.2-meter intermediate cable pack, currently connected - 20-meter intermediate cable pack, supplied as extra - 8-meter Push/Pull welding torch - Wera torque screwdriver, for correctly tightening the push/pull wire feed rollers - Box with various wear parts, including contact tips, gas nozzles, and other accessories - Ground cable with welding clamp - Connecting cables and other cables/hoses - Other accessories as shown in the photos - Manual available digitally Versatile professional system The combination of the 1.2-meter intermediate cable pack, the supplied 20-meter intermediate cable pack, and the 8-meter Push/Pull torch makes this system highly versatile for welding aluminum, among other applications, and for larger structures or workpieces where the welding machine cannot be placed directly next to the workpiece, the set offers a great deal of flexibility. The built-in welding data recording/datalogging is of interest to professional users who value process monitoring, quality control, and traceability of welding work. The machine has been used and has normal signs of wear, but is in good and solid condition. Sold as a complete set as shown. Inspection and testing are possible by arrangement. Pick-up only, shipping not possible. A forklift is available.

Year of construction: 2013, operating hours: 7,700 h, condition: repair required (used), functionality: limited functionality, machine/vehicle number: 12090, This is a recycling extruder with side feeding for materials (flakes, pellets, etc.). The system is supplied with a control cabinet and a double vacuum system. The pelletizing system is missing at the end of the screw – it is not included in the scope of supply. The cylinder ends at the flange. The extruder is supplied without a screw. The frequency inverter for the main motor was replaced with a new unit 3 years ago. Installed power approx.: 474 kW Cooling water requirement approx.: 190 l/min Fresh water consumption approx.: 110 l/h Feeding system: • Diameter of the feeding screw: 200 mm • Drive for the feeding screw: 45 kW, frequency-controlled • Hopper capacity net 7 m³/250 ft³, • Gear motor 3 × 3 kW • 2 sight glasses in the hopper • 2 level indicators Redsznz Ezopfx Ahcocf Extruder: • Diameter of the extruder screw: 145 mm • L/D ratio: 24 • Heating power: 50 kW • Extruder drive unit 280 kW Vacuum 1: • Screw length: 16 L/D • Heating power: 40 kW • Vacuum pump power: 11 kW • Vacuum capacity: 225 m³/h • Vacuum pressure: 33 mbar Vacuum 2: • Screw length: 16 L/D • Heating power: 40 kW • Vacuum pump power: 7.5 kW • Vacuum capacity: 190 m³/h • Vacuum pressure: 33 mbar Cylinder: • Cylinder: Bimetal extruder cylinder, • Reinforcement layer 1.8–2.0 mm thick, • Hardness 63–65 HRC Installation conditions: • Voltage: 3 × 400 Volts • Permissible fluctuation max.: +5 % – 5 % • Frequency: 50 Hz Permissible fluctuation max.: +4 % – 4 % • Protective measure: Multiple grounding • Ambient temperature: min. 15 °C, max. 35 °C • Humidity max.: 90 % • Altitude of the installation site: 0 – 1000 m The machine was in operation at an R&D center in Israel. Since the company now operates a production facility in Europe, the R&D center is being closed. The machines will be transported to Europe at the owner's expense and can be delivered EXW at a port or at the production facility in Europe. The details for optimal transport need to be clarified. The machine price is without packaging.

Condition: used, Year of construction: 2022, Plus freight 4,000.00 € and installation and commissioning 5,000.00 € Grinding system B Sand 5 with partial lathe Working principle The panel is placed on the infeed table. It goes into the partial lathe and centered. It is ground in the grinding system, through and back. The panel is turned in the partial lathe. It is ground on the other side in the grinding system. Then there are two options: either the panel goes onto the outfeed table and unloaded or it comes back onto the infeed table and is unloaded there (the second option extends the working time). Grinding system equipment 1 upper grinding lamella roller suitable for surfaces. Power 3 kW; D 420 mm; L 1300 mm. Cross brush suitable for grinding the cross fibers. D 420 mm; L 300 mm. Power 1.1 kW. Cross brush suitable for grinding the cross fibers. D 420 mm; L 300 mm. Power 1.1 kW. 3 upper sanding discs for perfectly trimming the longitudinal and transverse wood fibers. Power 1.5 kW each; D 400 mm. Disc brush for beveling edges. The unit functions as a deep brush. After detecting the panel edges, it will follow the door edges. Power 0.75 kW; D 250 mm. Machine features: -The unique sanding system of this machine guarantees perfect wood sanding and/or intermediate sanding of the panels. -All tools are controlled by frequency converters. -All brushes are equipped with quick-release sanding strips without replacing the hub. -The discs are equipped with air bladders to optimize cleaning and service life. -Sanding discs are equipped with a Velcro fastening system. -The feed and rotation speed are PLC-controlled to prevent edge breakage. -High-quality sanding on 4 sides thanks to the system's constant removal rate. -Automatic and rapid unit changeover. - Constant throughput height, PLC and industrial software enable interlinking in a surface line. - Continuously variable speed of the discs, brushes and feed thanks to the fully equipped frequency converter. - Right/left rotation of the discs and brushes with different abrasive grits. - Individually driven feed of the discs, rollers and belts. - Additional adjustment of the brushes and discs to balance the use of the abrasive and to allow for changing the grinding pressure on the surfaces. - Strong support bed made of tubular steel guarantees the best rigidity, stability and flatness. - Planed upper support bed to ensure the best parallelism of the working surface for the grinding discs. - All unit carriages are designed with linear recirculating ball bearing guides, thus high load capacity and high precision. - Motorized feed belt controlled by a frequency converter, 0.55 kW. Machine doors equipped with safety devices. - Machine doors equipped with windows to observe the workpieces during operation. - Under the units, there are 80 mm rubber-coated pressure rollers to hold the workpieces in place during processing. · Low follow-up costs thanks to individual blade replacement. · Low running noise thanks to the enclosed system housing. · All units have suction housings with their respective suction supports. Cover plate with suction nozzle. · Completely encapsulated machine housing for a clean environment. Rjdpfevvkipex Ahcecf

Year of construction: 2021, condition: ready for operation (used), functionality: fully functional, FLOW & THERMAL Regenerative Thermal Oxidizer (RTO), 18,000 Nm³/h (2021) Complete industrial system for the treatment of process water containing Volatile Organic Compounds (VOCs), consisting of stripping columns and a three-chamber Regenerative Thermal Oxidizer. Manufactured by Flow & Thermal Solutions / TECAM in 2021, the equipment was installed at a PET production plant and remained operational until the factory closed on 27 November 2025. The system removes VOCs from the water by means of air stripping and subsequently destroys them in the RTO through high-temperature thermal oxidation. Heat recovery through ceramic media helps reduce natural gas consumption. Main features • Manufacturer: Flow & Thermal Solutions / TECAM • Year: 2021 • Serial number: F002 • RTO nominal capacity: 18,000 Nm³/h • Configuration: three-chamber regenerative RTO • Fuel: natural gas • Honeywell / Eclipse TJ 200 burner • Burner output: 58–586 kW • Electrical supply: 400 V, 50 Hz • Electrical power stated on the nameplate: 40 kW • 30 kW Soler & Palau ATEX main fan • Siemens PLC automation with HMI touchscreen • LEL monitoring, purge, dilution, bypass and pneumatic valve systems • Vertical stack: 10 m high, diameter: 800 mm • CE marked Performance and operation The equipment operated at actual flow rates close to its nominal capacity, with recorded values ranging from approximately 16,400 to 17,900 Nm³/h. The latest available emissions test, carried out by DEKRA in December 2023, recorded the following values: • TOC: 13 mgC/Nm³ • NOx: 3–4 mg/Nm³ • CO: 125–153 mg/Nm³ During the tests, the equipment operated at an approximate temperature of 775–780 °C, with a treated water flow rate of 3.5 m³/h. Stripping columns The system includes: • Original stripping column, designed for approximately 6 m³/h. • Second Tecnium SLFKK9 stripping column, manufactured in PPH, with a nominal capacity of 8 m³/h and a maximum capacity of 10 m³/h. The second column was installed, but it is currently dismantled and lying on the ground after being knocked down by strong winds during the winter. It has a hole in the base which, according to the available information, is considered potentially repairable. The Tecnium column is equipped with internal packing, distributors, a mist eliminator, connections, drainage and provisions for integration with the existing control system. Condition and maintenance The system remained operational until the final closure of the plant in November 2025. The latest preventive maintenance was carried out by TECAM in June 2025 and included mechanical and electrical inspection, burner, fans, stripping columns, instrumentation, valves and functional testing. The equipment was operational, although maintenance work is required before recommissioning, mainly involving: • Process valves • Internal insulation of the towers • Ductwork and seals Rjdszvcknopfx Ahcjcf • Main fan impeller and expansion joints • Repair of the base of the second stripping column TECAM technical documentation is available regarding the recommended works, and several spare parts are also available. Scope of supply The system includes: • Three-chamber RTO • Combustion chamber • Burner and gas train • Main fan • Two stripping columns • Dilution and purge system • Hot bypass • LEL analysers • Stack • Ductwork • Electrical cabinets and controls • Platforms, ladders and support structures • Available spare parts

Condition: used, functionality: fully functional, This used Jungheinrich MPB pallet racking system is a high-performance, heavy-duty racking system for industrial storage requirements. This modular high-bay racking system is ideal for logistics, industry, large warehouses, and freight forwarding companies. With a load capacity of 2,000 kg per level and a bay load capacity of 10,000 kg, this immediately available pallet racking system offers an efficient solution for storing Euro pallets and heavy load units. PRODUCT DETAILS: - Height: approx. 1,050 cm - Depth: approx. 110 cm - Length: approx. 37.00 m - Level load capacity: 2,000 kg per level - Bay load capacity: 10,000 kg - Beams: approx. 360 × 12 × 5 cm - Beam color: yellow painted - Uprights: approx. 1,050 × 110 cm, pre-assembled - Upright color: blue painted - Levels: ground + 5 beam levels - Pallet spaces: 240 including ground spaces - Condition: used, Jungheinrich MPB SCOPE OF DELIVERY: - 11 × Uprights, approx. 1,050 × 110 cm, pre-assembled - 100 × Beams, approx. 360 × 12 × 5 cm - 200 × Locking pins PRICE: €5,700.00 net €6,783.00 gross You will receive an invoice with VAT shown. DELIVERY, INSTALLATION & INSPECTION: - Nationwide delivery by our partner shipping company – freight costs depend on the postcode - Professional assembly and disassembly by trained teams available as an option - Racking inspections according to DIN EN 15635 by certified inspectors Rcsdozxdckopfx Ahcsf - Inspection of existing heavy-duty racking systems from other manufacturers is also possible PLANNING & CONSULTING: Our planning department will be happy to create a non-binding offer for you – tailored to your individual requirements. Whether it's a new installation, renovation, or expansion – we will provide you with competent advice on your racking configuration. SHOWROOM: We invite you to visit our showroom! You can get a comprehensive overview of our pallet racking, storage racking, and other solutions on site. Many systems are set up and can be experienced directly. Our expert consultants are available to answer your questions and provide individual advice – we look forward to your visit! HAVEN'T FOUND WHAT YOU'RE LOOKING FOR YET? Visit our website. Here you will find a quick overview of many other offers and models. ARE YOU INTERESTED OR DO YOU HAVE QUESTIONS? Simply contact us via message or call. You will find our telephone number on our company page. ☎️ You can reach us by telephone from Monday to Friday from 08:00 to 16:00. Alternatively, you can send us a message with your name and telephone number. We will get back to you as soon as possible.

Condition: used, functionality: fully functional, This used Jungheinrich MPB pallet racking system is a high-performance, heavy-duty storage solution for industrial warehousing needs. The modular high-bay racking is ideally suited for logistics, industry, large warehouses, and freight forwarding companies. With a load capacity of 2,000 kg per level and a bay load of 10,000 kg, this immediately available pallet racking system offers an efficient solution for storing Euro pallets and heavy load units. PRODUCT DETAILS: - Height: approx. 1,050 cm - Depth: approx. 110 cm - Length: approx. 18.50 m - Load capacity per level: 2,000 kg - Bay load: 10,000 kg - Beams: approx. 360 × 12 × 5 cm - Beam color: yellow, painted - Uprights: approx. 1,050 × 110 cm, pre-assembled - Upright color: blue, painted - Levels: ground + 5 beam levels - Pallet spaces: 120 including ground spaces Rcodpfxszxdb Ho Ahcjf - Condition: used, Jungheinrich MPB SCOPE OF DELIVERY: - 6 × Uprights, approx. 1,050 × 110 cm, pre-assembled - 50 × Beams, approx. 360 × 12 × 5 cm - 100 × Locking pins PRICE: €2,950.00 net €3,510.50 gross You will receive an invoice with VAT shown. DELIVERY, INSTALLATION & INSPECTION: - Nationwide delivery by our partner shipping company – freight costs depend on the postal code - Professional installation and dismantling by trained teams optionally available - Racking inspections according to DIN EN 15635 by certified inspectors - Inspection of existing heavy-duty racking systems from other manufacturers is also possible PLANNING & CONSULTATION: Our planning department will gladly create a non-binding offer for you – tailored to your specific requirements. Whether it's a new installation, renovation, or expansion – we will provide you with competent advice regarding your racking configuration. SHOWROOM: Feel free to visit us in our showroom! Here, you can get a comprehensive overview of our pallet racking, shelving systems, and other solutions. Many systems are set up and can be experienced directly. Our expert consultants are available to answer your questions and provide individual advice – we look forward to your visit! HAVEN'T FOUND THE RIGHT ONE YET? Visit our website. Here you will find a quick overview of many other offers and models. ARE YOU INTERESTED OR DO YOU HAVE QUESTIONS? Simply contact us via message or phone. You can find our telephone number on our company page. ☎️ You can reach us by phone from Monday to Friday from 08:00 to 16:00. Alternatively, you can send us a message with your name and telephone number. We will get back to you as soon as possible.

Condition: used, functionality: fully functional, This used Jungheinrich MPB pallet racking system is a compact, high-performance heavy-duty racking system for industrial storage requirements. The modular high-bay racking system is ideal for logistics, industry, large warehouses, and freight forwarding companies. With a shelf load of 2,000 kg per level and a bay load of 6,000 kg, this immediately available pallet racking system offers an efficient solution for storing Euro pallets and heavy load units. The offered pallet racking system has a total of 432 pallet spaces, including ground-level spaces. At a total price of €9,870.00 net, this corresponds to a price of only €22.85 net per pallet space. PRODUCT DETAILS: - Height: approx. 520 cm - Depth: approx. 110 cm - Length: approx. 100.00 m - Shelf load: 2,000 kg per level - Bay load: 6,000 kg - Beams: approx. 360 × 12 × 5 cm - Beam color: yellow, painted - Uprights: approx. 520 × 110 cm, pre-assembled - Upright color: blue, painted - Levels: ground level + 3 beam levels - Pallet spaces: 432, including ground-level spaces - Price per pallet space: €22.85 net - Condition: Used, Jungheinrich MPB SCOPE OF DELIVERY: - 28 × Uprights, approx. 520 × 110 cm, pre-assembled - 162 × Beams, approx. 360 × 12 × 5 cm - 324 × Safety pins PRICE: €9,870.00 net €11,745.30 gross You will receive an invoice with VAT shown. DELIVERY, INSTALLATION & INSPECTION: - Nationwide delivery by our partner shipping company – freight costs depend on the postal code - Professional assembly and disassembly by trained teams, optional - Racking inspections according to DIN EN 15635 by certified inspectors - Inspection of existing heavy-duty racking systems from other manufacturers is also possible PLANNING & CONSULTATION: Our planning department will gladly prepare a non-binding offer for you – tailored to your specific requirements. Whether it's a new installation, renovation, or expansion – we will provide you with competent advice regarding your racking configuration. SHOWROOM: Feel free to visit us in our showroom! You can get a comprehensive overview of our pallet racking systems, shelving systems, and other solutions on-site. Many systems are set up and can be experienced directly. Our technical consultants are available to answer your questions and provide individual advice – we look forward to your visit! HAVEN'T FOUND THE RIGHT ONE YET? Visit our website. Here you will find a quick overview of many more offers and models. ARE YOU INTERESTED OR DO YOU HAVE QUESTIONS? Simply contact us via message or phone call. You will find our telephone number on our company page. ☎️ You can reach us by phone from Monday to Friday from 08:00 to 16:00. Alternatively, you can send us a message with your name and telephone number. We will get back to you as soon as possible. Rodpfx Ahszxdbyscocf

Condition: excellent (used), Year of construction: 2016, operating hours: 2,000 h, functionality: fully functional, clamping force: 3,200 kN, screw diameter: 65 mm, clearance between the columns: 680 mm, displacement volume: 929 cm³, injection pressure: 2,130 bar, injection weight: 845 g, ejector force: 62,000 N, ejector stroke: 160 mm, plate length: 680 mm, plate height: 680 mm, total length: 7,010 mm, total width: 1,700 mm, total height: 2,250 mm, overall weight: 13,500 kg, type of input current: AC, input frequency: 50 Hz, input voltage: 400 V, The Haitian Mars Series MA3200 (available in generations II and III, as well as an Eco variant) is a servo-hydraulic injection molding machine with a clamping force of 3200 kN (320 US tons). Rcedszww D Sepfx Ahcsf The machine was in operation at an R&D test center in Israel for quality control purposes. The machine operated without any issues until it was deactivated in June 2026. You can find an exact specification in the documents. Delivery terms: EXW Israel – Zeelim, unpacked on the ground, transport and packaging at the buyer's expense.

Condition: like new (used), mileage: 40,000 km, power: 96 kW (130.52 HP), fuel type: diesel, gearing type: mechanical, wheelbase: 3,682 mm, overall weight: 3,500 kg, empty load weight: 2,625 kg, maximum load weight: 875 kg, operation weight: 2,625 kg, first registration: 05/2019, next inspection (TÜV): 09/2028, loading space length: 3,733 mm, loading space width: 1,780 mm, loading space height: 1,800 mm, fuel consumption (urban): 9.3 l/100km, fuel consumption (extra-urban): 8.7 l/100km, fuel consumption (combined): 9 l/100km, CO₂ emissions: 232 g/km, emission class: euro6, color: white, number of seats: 3, number of previous owners: 1, Year of construction: 2019, total length: 6,198 mm, total width: 2,070 mm, total height: 2,600 mm, fuel: diesel, machine/vehicle number: Master 4 x 4 Sort, Equipment: ABS, AdBlue, Bluetooth, USB port, air conditioning, airbag, all wheel drive, all-season tires, car registration, central locking, differential lock, electric window regulation, electronic stability program (ESP), full service history, hill-start assist, immobilizer system, onboard computer, parking heater, power assisted steering, power mirror, sliding door, soot filter, tachograph, traction control, trailer coupling, truck registration, Master panel van with original 40,000 km in excellent condition +++ Not a rental vehicle - not used for parcel delivery - not used on construction sites +++ Very high-quality off-road conversion by Oberaigner, All-wheel drive, switchable Low range gear, switchable Special feature: Low range gear can be engaged even without all-wheel drive Design, system, and function similar to a Mercedes Sprinter with all-wheel drive Increased ground clearance Underbody protection Euro 6 emission standard - green particulate matter sticker Engine: 2.3 dCI - 96 kW / 131 hp Wheelbase L3: 4332 mm AD BLUE technology ECO function for economical driving Air conditioning Auxiliary heater with timer Rear view camera ABS - Anti-lock braking system ESP - Electronic stability program ASR - Anti-slip control Brake assist Hill start assist 3 seats in fabric - passenger double seat with folding table Driver's seat, height-adjustable with armrest + lumbar support Airbag for driver + passenger Central locking with remote control Electric windows Electrically adjustable and heated exterior mirrors Side marker lights Steering column, height-adjustable On-board computer Outside temperature display Gear shift indicator Radio with USB / MP3 / AUX Bluetooth hands-free system Daytime running lights Heat-insulating glazing Rcsdszxdavepfx Ahcof Storage compartment above the windshield Storage gallery, dashboard Power steering 6-speed manual transmission Rear step bumper Load compartment partition with window Rear double doors with glazing and heated rear windows LED load compartment lighting Roof-high load compartment lining Sortimo wooden load floor with lashing points for securing the load + lashing straps Sortimo shelving system Load compartment ventilation 230V connection with cable 2 x fire extinguishers Vehicle overall length: 6198 mm Vehicle height: 2600 mm Load compartment dimensions: 3733 mm long, 1780 mm wide, 1800 mm high Permissible total weight: 3500 kg Payload: 875 kg Tow hitch with 2500 kg towing capacity Vehicle is fitted with all-season tires, front 90%, rear 40% Complete service history, maintenance recently done MOT and emissions test new Very clean German vehicle in like-new condition, from first owner Truck net price: €25,900 Errors, omissions, and prior sale are subject to change. We also offer affordable financing options and guarantees up to 24 months, even for commercial users. Commercial vehicles at nutzfahrzeuge-heppenheim.de Email: info-at-nutzfahrzeuge-heppenheim.de

Condition: excellent (used), functionality: fully functional, mileage: 14,769 km, power: 110 kW (149.56 HP), color: white, first registration: 04/1998, chassis manufacturer: Bucher, total length: 6,000 mm, emission class: euro2, overall weight: 5,900 kg, empty load weight: 4,100 kg, Year of construction: 1998, Equipment: all wheel drive, differential lock, full service history, parking heater, power assisted steering, TÜV (roadworthiness inspection) will be newly performed. Truck registration. The Bucher is in an almost new condition, coming directly from an official authority (Army). It has been excellently maintained and has a complete service history—see attached photo. The bodywork is in good used condition. The Duro is equipped with: automatic transmission, all-wheel drive, differential lock, 2 front seats, tire size 10.5R20, fully automatic ZF transmission. The unladen weight is 4,100 kg, gross vehicle weight is 5,900 kg, displacement 3,747 cm³, 24-volt electrical system. Upon delivery, the Bucher not only comes with TÜV but also runs reliably. :-) The Duro is ideal as a hobby vehicle, but also well suited for daily work use. All my vehicles are listed on my homepage. Why drive back and forth from Flensburg to Berchtesgaden to view various vehicles when you can find over 150 vehicles of the following types here: Hanomag AL 28, Magirus Deutz, MAN, Steyr, Dodge WC, Saurer, Unimog, GMC 6x6, Steyr-Puch, Iltis, Willys, G-Class, Mowag, DB, etc.—all with TÜV as well. Plus, there's an incredible selection of spare parts and accessories. Why settle for less? Give me a call. Best regards, Philipp from D_MAX (Titans of Steel). Rodpsyhm T Sofx Ahcscf

Condition: excellent (used), Year of construction: 1999, operating hours: 650 h, functionality: fully functional, power: 4 kW (5.44 HP), Well-maintained, lightly used, powerful professional machine with 5 combined functions. Numerous accessories included. Features a circular saw and table router with sliding table, jointer and thickness planer, as well as a mortise drilling unit. 360 V The machine is available for sale immediately. It is located in a ground-level basement in 23858 Reinfeld. Rodpozn I Aaefx Ahcecf Transportation is the responsibility of the buyer.

Condition: as good as new (ex-display), Year of construction: 2023, functionality: fully functional, power: 8 kW (10.88 HP), input voltage: 400 V, input current: 18 A, input frequency: 60 Hz, type of input current: three-phase, cutting height (max.): 140 mm, cutting width (max.): 1,500 mm, saw blade diameter: 400 mm, tilt adjustment saw blade: 45 °, height adjustment type: electric, saw blade bore: 30 mm, actuation type: electric, rotational speed (max.): 3,000 rpm, rotational speed (min.): 5,000 rpm, total length: 7,250 mm, total width: 4,460 mm, total height: 1,770 mm, overall weight: 923 kg, table height: 900 mm, Equipment: documentation/manual, saw blade guard, scorer, • Electronically programmable circular panel saw for professional woodworking, combining the highest precision and user-friendliness. • Sliding table with aluminum roller table and hardened precision guides for consistently accurate cuts. • Flexibility: Manual, semi-automatic, and fully automatic operation possible. • Rip fence carriage with CompeX device, anodized aluminum profile with guide made of hardened, ground, and dovetailed steel guides. • Scoring unit with independent motorization, adjustable from the outside, and stops for easy saw blade positioning. • “SCM Thundercut” optimizer/sequencing control app for tablets. • Electronic 2-axis control: Vertical adjustment and tilting of the saw unit. • Eccentric clamping device. Rjdpezvd T Defx Ahcjcf • Electronic display of the parallel fence position.

Condition: used, Year of construction: 2008, · Working area X-Y-Z: 3,660 x 1,550 x 130 mm · Travel length X-Y: 4,200 x 2,000 mm Description of the units and accessories (base) The structure of the base body is a monolithic construction made of thick-walled steel. It is stiffened by welded triangular plates across the entire machine bed, making it extremely stable. The triangular shape used for load-bearing parts, with a large base, is the secret to ensuring lasting precision and stability. The machine layout allows the user an optimal workflow despite minimal space requirements. The base body constructed in this way therefore offers the machining unit a balanced and secure base with particularly good load distribution. The mobile unit carrier in gantry design is made of a solid monoblock. It is positioned in the X direction on prismatically ground guides via recirculating ball slides. The work unit is mounted on this mobile unit carrier on prismatic, ground guides and a recirculating ball slide. Axis movement: The drive system in the Y and Z axes is provided by ground, high-precision recirculating ball screws. The X-axis is driven by a backlash-free, preloaded precision rack and pinion drive. This ensures balanced load distribution during the positioning process. This characteristic is important for ensuring balanced movement even in more complex tasks. The various axes are driven by brushless three-phase servo motors/brushless AC motors. These offer excellent positioning speeds thanks to very short ramp times. Furthermore, the measuring system is fully integrated into these motors. These properties make this type of drive completely maintenance-free. · Rapid traverse in X: 40 m/min · Rapid traverse in Y: 60 m/min · Rapid traverse in Z: 22.5 m/min Vacuum system (basic) · Vacuum pump: 100 cbm/h · Power: 2.5 kW · Max. negative pressure (connection) 0.9 bar Control / control cabinet · Office PC or industrial PC (see options) · Basic NC control: ESA-GV KVARA 6.0 · Cable remote control with the most important functions ELECTRIC/ELECTRONIC CNC CONTROL Universal is equipped with a powerful NC control. The integrated office PC gives the NC control an unparalleled level of familiarity: the software runs on Windows XP and allows quick and easy programming, which is easy to learn even for inexperienced users. The system is open and allows the connection of CD-ROM drives, audio cards, barcode readers, modems, printers, scanning systems, etc. Furthermore, the installation of all network systems, as well as all commercially available CAD programs, is possible. To reduce space, the control cabinet is located under the machine table, and the operator works at a separate terminal on casters, which can be freely positioned. XILOG PROGRAMMING SYSTEM Software features: - Import of DXF files - Import of ASCII files - User interface in the operator's native language (available for languages I - GB - F - D - E) - Linear and circular interpolation in three axes, linear in space, spiral in the selected plane - Assisted programming - Calculator for direct transfer of calculated data - Graphic and syntax aids for drilling and milling operations - Parametric programming to perform the same panel machining on different Redpfsvvi Rfsx Ahcecf

Condition: used, Year of construction: 2011, Used Equipment Year of Manufacture: 2011 Condition: Currently installed Equipment and Technical Data: -Filter housing base ring NFHSU 9/9 with discharge chute for press - Discharge: 1.1 kW - Storage volume in the base ring approx.: 3.25 m³ - Dimensions L x W x H (incl. base ring) 2440 x 2440 x 900 mm - Ground clearance: 350 mm - Conveyor screw for briquetting press 0.75 kW - Extension and expansion rings are optional; max. storage volume approx. 12 m³ - Extension and injection ring NFHSU for 9/9 and 10/10 Jet, L x W x H: 2480 x 2480 x 500 mm - Expansion ring for NFHSU 9/9, 2480x2480x700 mm, with inspection door and type-tested explosion flap - Filter for filter housing NFHSU 9/9/20, filter area 116 m²: The Nestro filter system NFHSU is a solid filter construction made of 4 mm galvanized steel sheet and is designed for outdoor installation and weather resistance. This filter system is particularly robust and designed for underpressure operation up to -3,500 Pa. The filter system is equipped with upper and lower inspection doors 600 x 600 mm, with automatic filter regeneration, dry extinguishing system, differential pressure switch / volumetric flow monitoring and the necessary explosion protection. Note: Filter is equipped with high-quality filter material, BIA category M, antistatic, residual dust content < 0.1 mg/m³ and suitable for return air operation. Further technical data: - Filter tube length: 2,000 mm - Filter tube diameter: 230 mm - Number of filter tubes: 81 - Filter area: 116.0 m² - Filter regeneration: automatic/motorized - Number of vibrating motors: 4 pcs - Fan shroud for NFHSU 9/9 including inspection door - Fan US-FHN (clean gas) 22 kW 16,400 m³/h - 3,200 Pa: A Nestro high-performance fan with above-average efficiency and high energy saving potential when using a frequency inverter (optional). The robust welded construction is primed and painted in RAL 5015. The fan is delivered as standard with an inlet cone and backflow damper. Technical data at a glance: - Volumetric flow: 16,400 m³/h - Corresponding underpressure: 3,200 Pa - Electric motor: 22 kW / 400 Volt / 50 Hz - Speed: 3,000 rpm - Design: B5 - Pressure nozzle: without - Application area: Nestro underpressure filter and others - Injection nozzle d= 400 mm with flange ring - Injection nozzle d= 350 mm with flange ring - Backflow damper d= 350 mm with flange edge - Backflow damper d= 400 mm with flange edge - Briquetting press C150; 30 - 50 kg/h, hydraulic unit 5.5: Rjdpszvz Tbsfx Ahcecf Technical data: - Power consumption (hydraulics): 5.5 kW - Briquette diameter: 50 mm - Weight: 650 kg - Briquetting performance with a bulk density of approx. 250 kg/m³, material-dependent: 30 - 50 kg/h - Ground clearance with base frame (art. no. 710300): 350 mm - Briquetting press, dust-proof - Briquetting press complete with hydraulic solenoid valve control for automatic operation, oil tank with 100 l oil, in welded construction, including main cylinder, stuffing cylinder, gripper cylinder, pressing jaw, electrical control panel with fully automatic control and 5 m cable The press is standardly equipped with: Monitoring switch for oil temperature, hardened press bushing, connection part for briquette line and automatic briquette length adjustment

Year of construction: 2011, condition: used, This is an 115-liter electric braising pan, MAGNUM 3/1 GN, from the premium manufacturer MKN, type Optima 850. The braising pan is a multi-functional device for poaching, boiling, simmering, stewing, and frying. It is emptied via a safety drain valve on the front. The device has been inspected in our in-house workshop and is fully functional. The braising pan has been completely refurbished and is in excellent condition. You will receive an invoice with VAT shown. Our used equipment service for you: 6 months warranty on all electrical parts High-quality branded equipment at fair prices Professional overhaul / inspection & expert cleaning Tested & fully functional - or your money back Flexible shipping or self-collection options Competent advice - before and after purchase Rjdpfx Ahezu Rpcecjcf Provision of operating instructions, connection diagrams & spare parts Inspection according to DGUV V3 Technical data: W x D x H: approx. 1300 x 850 x 850 mm Inner pot W x D x H: 700 x 540 x 250 mm Power connection: V: 400 / kW: 19.2 Serial number: 11203758 Type: 2022705 Year of construction: 2011 Nominal capacity: 115 liters Condition: Used, inspected and fully functional Further information: Multi-functional cooking appliance for poaching, boiling, simmering, stewing and frying Braising pot made entirely of highly corrosion-resistant chrome-nickel steel Frying surface made of special sandwich material (MKN PowerBlock), smooth-ground Heated by SUPRA contact heating elements for optimal heat distribution and short heating times Braising pot with raised edge, tightly welded High thermal capacity ensures uniform heat transfer and minimal temperature fluctuations when the plate is loaded with cold food Standard with electronic "Eco Control" Standard with double-walled hinged lid and mixing tap Emptying via safety drain valve to the front Shipping: Delivery or self-collection by arrangement Worldwide shipping on request Shipping to islands or mountain stations only by arrangement Do you have any questions, would you like advice, or would you like to see something on site? You can reach us by telephone during our opening hours: Monday - Friday 09:00 - 13:00 and 14:00 - 17:00. The sale is exclusively subject to our general terms and conditions (GTC).

Condition: excellent (used), functionality: fully functional, Year of construction: 2012, operating hours: 2,000 h, AMV 7450D SHOTCRETE ROBOT – DISMANTLED SHOTCRETE APPLICATION UNIT – 2012 For sale: a professional, dismantled AMV 7450D Shotcrete Robot application unit, designed for wet-mix shotcrete application. The unit was manufactured by the renowned Norwegian company AMV Andersen Mek. Verksted AS, which specializes in the design of machinery for tunnel, mining, and underground operations. IDENTIFICATION DATA: * Manufacturer: AMV Andersen Mek. Verksted AS, Norway * Model: AMV 7450D Shotcrete Robot * Year of unit manufacture: 2012 * Serial number: 12-0070 * Year of base vehicle manufacture: 2012 * Original chassis: Mercedes-Benz Actros * Type: mobile shotcrete robot * Application technology: wet-mix method * Number of operators: 1 * Operating voltage: 400 V AC * Permissible/technical weight as indicated on the AMV nameplate: 44,500 kg – parameter related to the complete machine configuration * Current condition: unit is dismantled from the chassis KEY OPERATIONAL PARAMETERS: * Maximum concrete pump output: up to 25 m³/h * Vertical reach of the boom: approximately 13.7 m * Horizontal reach of the boom: approximately 13.7 m * Working material: shotcrete * Operating method: wet-mix shotcrete application * Working system: specialized tunnel boom with spray nozzle Rjdpfxszw T Sxs Ahcjcf * Unit power supply: 400 V AC * Water tank: capacity to be confirmed * Operating pressure of the system: to be confirmed based on technical documentation * Actual weight of the dismantled unit: to be confirmed DEVICE DESCRIPTION: The AMV 7450D is a specialized shotcrete robot designed for efficient and precise application of concrete in challenging underground environments and on large infrastructure projects. The extended working boom allows for shotcrete application at height and in hard-to-reach locations that are inaccessible to conventional concrete pumps. The output of up to 25 m³ of concrete per hour enables efficient execution of large areas and work requiring rapid ground stabilization. The machine is designed to be operated by a single operator. This solution reduces the number of workers in the immediate shotcrete application zone, improving safety and control over the process. * construction of concrete tunnel linings, * shotcrete application in road and railway tunnels, * mining and quarrying operations, * reinforcement of underground excavations, * securing rock walls and ceilings, * ground stabilization after excavation, * reinforcement of shafts and underground chambers, * construction of subways and other underground structures, * stabilization of slopes and embankments, * execution of landslide protection measures, * geotechnical works, * protection of foundations and deep excavations, * reinforcement and repair of concrete structures, * repair of dams, canals, and other hydraulic structures, * protection of rock surfaces against spalling, * work on hydroelectric power plants and technical tunnels, * execution of specialized infrastructure contracts. The equipment is intended primarily for tunnel, mining, geotechnical, construction, and hydraulic companies, as well as companies engaged in the repair and modernization of specialized AMV machinery. Additional photos, videos, nameplate photos, and information regarding the included equipment can be provided. Please feel free to contact me for further information and to arrange a viewing.

Condition: used, Year of construction: 2012, functionality: fully functional, machine/vehicle number: 82397, type of input current: three-phase, welding current (max.): 420 A, Equipment: type plate available, MERKLE Insquare W 421 AC/DC water-cooled TIG welding system Manufacturer: MERKLE Model: Insquare W 421 AC/DC Year of manufacture: 2012 Serial number: 82397 Description For sale is a powerful AC/DC TIG welding system from MERKLE with water cooling. This system is suitable for professional welding applications on steel, stainless steel, aluminum, and other non-ferrous metals. The AC/DC technology allows for both DC and AC welding, covering a wide range of applications. With a welding current of up to 420 A, the system is ideal for industrial use in metal, tank, plant, and pipeline construction. The water cooling ensures continuous and reliable operation, even at high welding currents. Technical data Manufacturer: MERKLE Type: Insquare W 421 AC/DC Year of manufacture: 2012 Welding current range: 5 – 420 A AC frequency: 50 – 200 Hz Open-circuit voltage: 80 V Mains connection: 400 / 415 V, 50 / 60 Hz, 3~ Rcjdpfx Ajzamffshcef Duty cycle at 40 °C: 420 A at 40 % 360 A at 60 % 310 A at 100 % Protection class: IP23 Water cooling Standard: EN 60974-1 Scope of delivery MERKLE Insquare W 421 AC/DC Water cooling TIG torch Ground cable Foot pedal All information is subject to change without notice.

Condition: as good as new (ex-display), Year of construction: 2025, operating hours: 15 h, functionality: fully functional, machine/vehicle number: LZ202508173W, type of input current: AC, total height: 1,600 mm, total width: 600 mm, total length: 1,300 mm, input voltage: 220 V, overall weight: 205 kg, warranty duration: 12 months, type of cooling: water, sheet thickness aluminum (max.): 5 mm, product height (max.): 6 mm, space requirement height: 1,800 mm, space requirement width: 1,600 mm, space requirement length: 2,300 mm, input current: 32 A, protection type (IP code): IP54, laser power: 1,500 W, input frequency: 60 Hz, laser wavelength: 1,080 nm, wire diameter (max.): 1.8 mm, sheet thickness steel (max.): 5 mm, sheet thickness stainless steel (max.): 5 mm, Equipment: documentation/manual, type plate available, EX-DEMO TRADE SHOW 2026 UNIT WITH 40% DISCOUNT We are offering for sale, with an exceptional 40% discount on the list price, our LZ-WH 1500W fiber optic laser welding machine. This machine is in like-new condition: it has been used for only a few hours as a demonstration unit during industry trade shows throughout 2026. It is in perfect working order and ready for use. 4-IN-1 TECHNOLOGY: MAXIMUM VERSATILITY A single, compact, mobile, and plug&play system, designed to perform: -Manual laser welding: Up to 4mm on carbon steel/stainless steel and 3mm on aluminum, with or without wire feed. -Laser cleaning: Rapid removal of rust, paints, oils, and oxides. -Laser cutting: Precision cutting of sheet metal with limited thickness. Rcodpezw Uf Tefx Ahcjf -Weld bead cleaning: Aesthetic finishing and passivation of the weld bead after processing. ADVANCED SAFETY AND COMPLIANCE WITH EUROPEAN DIRECTIVES The machine has been configured to meet the most stringent European industrial safety standards. It is equipped with: Dual-channel safety interlocks to ensure redundancy and maximum reliability of the laser emission locking systems. Dedicated safety interlock switch, designed to be directly connected to a control cabinet or a protective welding curtain. This ensures that the laser cannot be activated if the perimeter barriers are not secured. Contact interlock on the ground clamp and Category 0 emergency stop button. MAIN TECHNICAL DATA Laser Source Power: 1500W (continuous wave CW) Wavelength: 1064 - 1080 nm (internal Class 4) Power Supply: 220V Single-phase, 50/60Hz Total Power Consumption: ~7 kW Cooling: Integrated 16L water chiller for continuous and intensive operation cycles and fan. Wire Feeder: Automatic and integrated into the cart. Interface: Color touch-screen with pre-set parameter library. Overall Dimensions (LxWxH): 1300 x 600 x 1600 mm Weight: 205 kg Protection Rating: IP54 INCLUDED EQUIPMENT The system is supplied complete with everything needed for production: machine body with chiller, manual laser torch with cable harness, wire feeder, ground clamp, and a comprehensive kit of consumables (replacement protective lenses and a set of copper nozzles for various functions). SALES TERMS AND LOGISTICS Condition: New machine (Ex-Demo trade show 2026). Price: 40% discount from the list price. Delivery: Ex Works (EXW) at our facility in Settimo Torinese. Shipping: Inspection and direct pick-up at our facility are possible. If transport is required, packaging and shipping costs will be calculated separately upon request from the buyer. Documentation: User and maintenance manual, and CE certification. Contact us to receive the complete technical data sheet or to view the machine in operation. OR REQUEST A QUOTE FOR A NEW MACHINE!

Year of construction: 2018, condition: used, 2018 | Heatwork HW3600 | Used Small Equipment 📍Location: Latvia 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 38500 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 1 inspection points 1 approved ✅ 0 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: Engine hours 2495 - HeatWork HW3600 Ground Thawing / Hydronic Heater - 2018 Diesel and electric hydronic heater, 103 kW, Made in Norway Overview: HeatWork HW3600 (year 2018), a mobile ground-thawing and frost-prevention machine. Closed-system hydronic heater delivering fluid-borne heat up to 100 degrees C for thawing frozen ground, curing concrete, heating buildings and halls, drying and frost protection. Three independent hose circuits (630 m total) for flexible coverage of large areas. Year-round machine. Condition: Fully functional when run on AC mains power - heating, pump and controls all operate normally. When running on the built-in diesel generator, the unit may shut down unexpectedly and fail to restart; fault suspected in the control box. Sold as-is; buyer should budget for control-box diagnosis/repair to restore off-grid diesel operation. Usable now wherever mains power is available. Key specifications: Year: 2018, Engine hours: ok. 2,500 h Max heating effect: 103 kW, Fluid temp: 0-100 degrees C, Efficiency: 94 percent Pump: 3,900 l/h, Burner: single stage Fuel: winter diesel (Arctic Class 2) / biodiesel; ok. 3.5 l/h thawing 200 m2, max 9.0 l/h Diesel tank: 320 L, Run time: up to 90 h, VTV fluid: ok. 50 L Hoses: 3 x 210 m = 630 m, reinforced (max 30 bar), System pressure: 2-6 bar Electrical: 230 V / 2,600 W, Weight: 1,860 kg, Origin: Norway Capacity: Thawing 0-200 m2 (internal reel), 200-400 m2 with external reel; frost prevention up to 400 m2. Thawing ok. 48 h at 60-80 cm depth. Applications: Frozen ground/ice/snow, concrete curing, heating buildings/garages/workshops, preheating before casting, point-thawing foundations/manholes, roof thawing, drying, water heating. Rodpfxszuaprj Ahcocf 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "41209 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: as good as new (ex-display), Year of construction: 2025, operating hours: 3 h, functionality: fully functional, type of input current: three-phase, total height: 1,420 mm, total width: 560 mm, total length: 1,100 mm, input voltage: 400 V, ground cable length: 4,000 mm, overall weight: 100 kg, warranty duration: 12 months, type of cooling: water, hose package length: 4,000 mm, electrical fuse: 32 A, DGUV certified until: 08/2027, welding power (max.): 19 kVA, open-circuit voltage: 61 V, welding current at 60% duty cycle: 470 A, welding current at 100% duty cycle: 420 A, space requirement height: 1,770 mm, space requirement width: 600 mm, space requirement length: 1,250 mm, input current: 30 A, protection type (IP code): IP23, welding current (min.): 3 A, welding current (max.): 500 A, input frequency: 50 Hz, Equipment: documentation/manual, type plate available, We are offering this Böhler Welding TERRA NX 500 PME Rockstar welding machine, a showroom model from 2025, for sale. The package includes a wire feeder, a 1.5m intermediate hose set, a 4m UP/Down welding torch, and a ground cable. Rsdpjzvmi Isfx Ahcscf If you have any questions or require further information, please feel free to send us a message or call us.

Condition: good (used), Year of construction: 2023, lifting height: 9,030 mm, fuel type: hybrid, General information Mileage: 63.649 km Weights Empty weight: 2.623 kg Functional Lifting capacity: 120 kg Working height: 1.100 cm Working width: 612 cm Dimensions of cargo space: 612 x 202 x 268 cm CE mark: yes Condition Technical condition: good Visual appearance: good Other information TÜV Marked: yes Delivery terms: EXW Max. horizontal reach: 600 m Max swing of platform in degrees: 400 Production country: FR Additional information Please contact Christian Theißen for more information Manufacturer: France Elevateur (Ruthmann) Model: Topy 11.1 Year of build: 2023 Condition: Used Data: Max. working height: 11,03 m Max. platform height: 9,03 m Max. reach: 6,00 m Total dimensions LxWxH: 6,12 x 2,02 x 2,68 m Platform dimension WxD: 0,68 x 0,63 m Length of transport position: 6,12 m Height transport position: 2,68 m Max. basket load: 120 kg Swivel range: 2 x 210°=400° Ground clearance: 0,19 m Driving license category: B / 3 Empty weight: 2.623 kg Total permissible weight: 2.743 kg Special features: Trailer hitch, rearview camera, paint in RAL9003 white, engine start/stop in the work basket, 2x LED warning lights + triflash, 2x wheel chocks including holder, socket in the basket, no supports. Information: Tüv und UVV neu Rcodpfxjzmttze Ahcjf Location: 41468 Neuss immediately available

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, turning length: 3,000 mm, turning diameter over bed slide: 480 mm, controller model: Siemens 840D, TECHNICAL DETAILS Swinging diameter over bed: 520 mm Swinging diameter over carriage: 480 mm Turning length: 3,000 mm C-axis: yes Rcedpfx Aozwmztohcof C-axis speed range: 0–20 rpm Number of tools: 12 Driven tools: 6 Spindle bore: 103 mm Main spindle head size: 8 MACHINE DETAILS Control system: Siemens 840D Main drive Main drive: 1-stage AC main drive Drive power: 53 kW Duty cycle: 50 % Speed range: 30–3,000 rpm EQUIPMENT Forkardt 3 NHF 315-82 A8 power chuck with centrifugal force compensation and hard, ground-in top jaws Outer diameter of power chuck: 315 mm Bore diameter of power chuck: 82 mm Maximum bar diameter: 63 mm Including draw tube and mounting for power chuck

Condition: refurbished (used), Machine is located at our premises in Burscough. We welcome any inspections prior to sale. Rcsdpfx Aozwmrlohcof Spindle Diameter 4" / 101.6mm Spindle Taper 50 INT Main spindle travel 30" / 762mm Spindle speeds 10 - 1300rpm Vertical Y Travel - 48" / 1219mm Main Motor 25 HP Equipment - Facing head, outer (tailstock) steady Vast amount of tooling, rotary table, angle plates. DRO Pendant control This machine has undertaken a full machine rebuild and all slides re ground. Exceptional condition

Condition: ready for operation (used), Year of construction: 1994, A loader GHH for the coal mining industry is available. Bucket volume: approx. 2.5m³, payload: 6000kg, max. speed: 22.5km/h, max. dumping height: approx. 1500mm, turning radius: approx. 6m, articulation angle: +/-42°, max. gradeability: 25%, rated power: 102kW, lifting pressure: 190bar, steering pressure: 150bar, lifting time: 5s, max. tractive force: approx. 180kN. Machine dimensions X/Y/Z: approx. 9200mm/2100mm/2350mm, unladen weight: approx. 17000kg. Documentation available. An on-site inspection is possible. Rcedjxn S T Njpfx Ahcef