Used Cable Slot for sale (6,662)

Condition: good (used), max. ram stroke 230 mm throat 230 mm table diameter 0 mm are offered : Cjdpfxsw Ny S Rj Aiiori 2 pieces of shaping spindle for Lorenz gear shaping machines type LS 630 to LS 1250 1x overhauled new 1x has to be overhauled. Year of manufacture: unknown

Condition: refurbished (used), DEMAG wire rope hoist / crane DH 316 H12 (completely overhauled) 2 units available. Crodpfjxq Rx Aex Aiiji

Condition: good (used), Clamping plate with T slots, T-slot plate, punching table, clamping plate, plate field, Credpfsxm R Ipox Aiioi -T-slot plate: clamping plate with T-slots, for hydraulic press, eccentric press... -Clamping surface: 630 x 500 mm -Inner diameter: 180 mm -Plate height: 75 mm -Groove width: 19 mm -Dimensions: see drawing in the photos -Dimensions total: 630/500/H75 mm -Weight: 162 kg

Condition: used, Boring power 23.0 / 28.0 mm Boring depth max. 140 mm Center of spindle to wall or column 300 mm Column diameter 125 mm Size of table plate 415 x 385 mm Cedpfsxabbyox Aiieri Speed 100 - 2000 U/min. spindle taper MT 2 MK voltage 380 V Motor output 0.9 / 1.4 KW weight of the machine ca. 225 kg Dimensions (L/W/H) 900 x 600 x 1960 mm maintained condition (!!) Furnishing: - V-belt operated column drilling machine - Right/left running of the work spindle - Pole-changing drive motor - manual spindle feed via cross handle - Work table with 2x T-slots - Table height adjustment via hand crank - machined base plate with 3x T-slots - manual V-belt tension (front handwheel) - Connection cable including 16A plug * Machine link: ?machineno=1008-9103760

Condition: good (used), Multi-purpose hoist, grab hoist, lifting hoist, assembly hoist, cable hoist, universal cable hoist, cable pulling device, steel cable for cable hoist -Steel rope: for rope pull multi-purpose pull Codpfxsxbx R Is Aiijri -Rope diameter: 11 mm -Length: 20 m -Number: 3x steel cable available -Price: per piece -Transport dimensions: Ø 440 x 110 mm / Ø 430 x 95 mm -Weight: 10.7 kg / 11 kg

Condition: good (used), Multi-purpose hoist, grab hoist, lifting hoist, assembly hoist, cable hoist, universal cable hoist, cable pulling device, steel cable for cable hoist -Steel rope: for rope pull multi-purpose pull -Rope diameter: 12 mm -Length: 20 m -Transport dimensions: 380/150/H400 mm -Weight: 13.8 kg Crjdpfx Aijxbx Uyeisi

Condition: good (used), Multi-purpose hoist, grab hoist, lifting hoist, assembly hoist, cable hoist, universal cable hoist, cable pulling device, steel cable for cable hoist -Steel rope: for rope pull multi-purpose pull Credpfexbyclsx Aiiji -Rope diameter: 11 mm -Length: 40 m -Transport dimensions: 480/100/H480 mm -Weight: 20.3 kg

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, For sale: Boxmaker 2500 working width, fully automatic, 2 flexo printers 500x200 mm, 2 die cutters for hand holes, or depending on the installed die, year of manufacture 2023. Credpfx Aiexgbyceisi

Condition: good (used), Multi-purpose hoist, grab hoist, lifting hoist, assembly hoist, cable hoist, universal cable hoist, cable pulling device, steel cable for cable hoist Credpfxsxbfk Ue Aiisi -Steel rope: on hand reel, for rope hoist multi-purpose hoist -Rope diameter: 12 mm -Length: 43 m -Transport dimensions: 430/300/H460 mm -Weight: 30 kg

Condition: used, mileage: 235,000 km, power: 126 kW (171.31 HP), fuel type: diesel, gearing type: automatic, first registration: 09/2008, emission class: euro4, color: black, number of seats: 5, Equipment: ABS, air conditioning, all wheel drive, central locking, had accident, immobilizer system, * Nissan Navara Pick Up Double King Cab XE 4x4 – Passenger Car Registration – * 2.5 l Diesel – Displacement: 2,488 cc – 126 kW / 176 hp – Euro 4 – Green Emissions Sticker – * ATTENTION: VEHICLE HAS A TRANSMISSION ISSUE – WHEN WARM, 4TH AND 5TH GEAR MAY OCCASIONALLY JUMP OUT – CAUSE UNKNOWN – VEHICLE IS DRIVABLE – SOLD AS IS, IN CURRENT CONDITION – * VIN: VSKCVND40U0329130 – German vehicle – German registration document – * Tow bar with 2,600 kg braked towing capacity – 750 kg unbraked – * Vehicle available immediately – Preferred sale to trade / export / commercial operators * Viewing by appointment only – * Contact person: Mr. Andreas Vogel * The information provided online is a non-binding description. * They do not constitute warranted characteristics. * The seller assumes no liability for typographical or data transmission errors. * Subject to prior sale, changes, and errors. Codpfxexgldro Aiisri Special Equipment: Metallic paint, Topline package Additional Equipment: Driver and passenger airbags, active front head restraints, steering wheel audio/radio controls, automatic headlight activation, electrically adjustable and heated exterior mirrors, exterior mirrors with ground lighting, exterior mirrors with chrome trim, outside temperature display, integrated indicators in exterior mirrors, Bluetooth interface, Nissan Brake Assist system, 6-disc CD changer, roof rack, limited-slip differential, aluminum entry sills, electronic brakeforce distribution (EBD), electric front and rear windows, side protection, Bluetooth hands-free kit, front footwell lighting, center console cup holders, seatbelt pretensioners, leather handbrake lever, heated rear window, auto-dimming interior mirror, ISOFIX child seat mounts, body/cabin: double cab, body: pick-up, 2-zone automatic climate control, Comfort package, chrome front grille, lumbar support driver’s seat, height-adjustable steering column, alloy wheels, engine 2.5 l – 126 kW dCi Diesel CAT, radio preparation, 6 speakers, wheelbase 3,200 mm, full-size spare wheel, split/folding rear seat, leather gearshift/selector lever, height-adjustable front seatbelts, height-adjustable driver’s seat, sun visors with mirrors, 12V socket in center console, chrome rear bumper, partially body-colored bumpers, side steps, interior chrome door handles, tinted windows, dark-tinted rear windows, UV-protection glazing.

Condition: good (used), Year of construction: 2008, working width: 4,500 mm, Leading-edge introduction. No. 2 printing unit, positioned below. Credpfx Aszm Tcveiiji Double-shaft automatic slotter. Rotary die-cutter, positioned above. Folder gluer. Valco MCP-12 electronic glue unit. Stitching head. High-pile stacker. Computer – Siemens electronics. Maximum sheet size: 1,660 x 4,500 mm.

Condition: new, thread dia. bis M 24 turning speeds max. 280 U/min thread M5 - M24 working area 2050 Rmax. work height max. 900 mm table surface area 700 x 900 mm oil volume 100 l engine output 3.0 kW weight - pallet system 280 kg Equipment: - electro-hydraulic tapping machine - Large working range (max. radius 2050 mm) * Smooth swivel movement, e.g. due to built-in gas pressure dampers - Mobile machine base frame * Oil tank hydraulic unit integrated in the base frame * Hydraulic pressure gauge - Vertical / horizontal thread cutting possible - Connection cable with 16A plug Crjdjy Umdlepfx Aiiei * Special accessories included in the scope of delivery : - Tap quick-change inserts according to "DIN 376" . M05 / M06 / M08 / M10 / M12 / M14 / M16 / M18 / M20 / M22 - Infinitely variable speed adjustment incl. digital display - Minimum quantity lubrication (spray oiler/compressed air) - T-slot clamping table - Tapping head can be fixed with magnetic quick-action insert

Condition: ready for operation (used), Year of construction: 1998, travel distance X-axis: 400 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 630 mm, controller manufacturer: SIEMENS, table width: 850 mm, table length: 1,250 mm, overall weight: 8,000 kg, spindle speed (max.): 10,500 rpm, number of slots in tool magazine: 24, number of axes: 3, This 3-axis CHIRON DZ 18 W MAGNUM was manufactured in 1998. It features an X-axis travel of 400 mm, Y-axis travel of 400 mm, and Z-axis travel of 630 mm. The machine includes a table size of 1250 × 850 mm and a tool magazine capacity of 24 tools. If you are looking to get high-quality machining capabilities, consider the CHIRON DZ 18 W MAGNUM vertical machining centre we have for sale. Contact us for further details. - Control System: Siemens CNC- Spindle Taper/Chuck: SK40- Spindle Speed Range: 320 – 10,500 rpm- Tool Magazine Capacity: 2 × 12 slots (24 tools total)- Tool Change Time: approx. 1.9 s- Chip-to-Chip Time: approx. 3.9 s- Retrofit/Overhaul Date: 2021 - Complete modernization: • main spindles overhauled • ball screws replaced • tool changer overhauled, • axis systems/guides/bearings overhauled • hydraulic/pneumatic systems updated • electrical system and cabling modernized Crsdpjzcyh Eofx Aiiei • safety elements replaced • geometry adjusted- Cooling System: Internal cooling (IKZ) via Knoll paper band filter and high-pressure unit (Unit Number: 646)- Chip Management: Integrated chip conveyor and swarf bin- Workholding: Hydraulic workpiece clamping on a 180-degree workpiece changing table (W-axis)- Additional Features: Prepared for 4th/5th axis integration, attached cabinet climate control unit

Condition: used, Bluhm Systems Csdozgci Espfx Aiisri Type: e-SolarMark FL Marking laser, fiber laser e-SolarMark FL. No functional guarantee (untested). Introduction: The e-SolarMark FL10W and 30 W are laser systems of Class IV according to the IEC 825 and EN 60825 guidelines (standards for applications with end customers). It is designed to be integrated into a system or operated separately with a protective housing. After installation, the laser system must meet the requirements for a product with a specific protection class, according to the aforementioned guidelines. The e-SolarMark is a laser system for marking and engraving plastics, metals, and foils, both stationary and in motion. Technical Specifications e-SolarMark Description The e-SolarMark system consists of two main components: 1. The marking unit with laser head (scanning head) with focusing lens. 2. The control unit includes the power supply, electronic control system, and firmware for system function, with I/O slots inside. The e-SolarMark includes a fixed galvo scan head, equipped with a lens for a square marking field with standard dimensions of 70 x 70 mm. Laser Specifications (Standard Version) Laser Type - Fiber Laser Laser Output Power - FL2 Model: 19W; typical Wavelength - 1062 nm typical Internal Modulation - 20 to 80 kHz Scanner Head Description: Scan Head - Two galvanometric mirror scanners with a hard, highly reflective dielectric coating. F-Theta Lens Types and Their Properties: Lens - Marking field 70x70 mm to 300 x 300 mm Focal distance - 192 mm Operating Environment Conditions: Relative humidity up to 80%, non-condensing Operating temperature 5 - 40°C Recommended operating temperature 15-25°C Dimensions W x H x D Laser unit 122 x 108 x 495 mm Control unit 520 x 380 x 215 mm Cable length, marking/control unit 3 m Weight, marking unit 5 kg Weight, control unit 15 kg Mains voltage 115/230 VAC. 50/60 Hz, single-phase. Power consumption, FL2 model 450W Condition: used Scope of delivery: (See picture) (Subject to changes and errors in the technical data!) We will be happy to answer any further questions you may have by telephone.

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, MAZAK vertical machining center VTC 530 Year 2019 Control unit: SMOOTH G X-axis travel: 1740 Y-axis travel: 760 Z-axis travel: 660 Table length: 2300 Table width: 760 Distance between top of table and spindle nose: 180 Maximum workpiece dimensions (length x width x height): 4100x905x790 Credpfx Aijzz Suteisi Table surface: T-slot Maximum workpiece weight: 1400 Spindle speed: 12,000 rpm Spindle connection: ISO 40 Din Rapid traverse rate, X-axis: 42000 Rapid traverse rate, Y-axis: 42000 Rapid traverse rate, Z-axis: 42000 Number of tools: 30 Coolant pressure: 15 Bar through the spindle Mayfran chip conveyor Air blow for dry machining Synchronized tapping Center partition for tandem machining Additional pre-setter Additional light Handwheel on remote cable

Condition: good (used), Year of construction: 1971, Clamping plate with T-slots and cross table, plate field, welding table, welding table, plate boring machine, T-slot plate -T-slot plate comes from a Wanderer milling machine type: KFH401 -Travel: approx. 1000 mm -Width: 400 mm -Length: 2000 mm -Height: 330 mm Crodjc N Uacjpfx Aiiji -Plate thickness: mm -Table height: mm -Plate: Solid -Groove width: mm -Dimensions: 2280/430/H330 mm -Weight: 934 kg

Year of construction: 1982, condition: good (used), Clamping plate with T-slots and cross table, plate field, welding table, welding table, plate boring mill, T-slot plate -T-slot plate: for milling machines -Width: 500 mm -Length: 500 mm -Height: 87 mm -Plate: is solid -Groove width: 12 mm -Dimensions: see photo technical drawing -Quantity: 21x mounting plates available Crodehubczspfx Aiiji Price: per piece -Dimensions: 500/500/H87 mm -Weight: 91 kg/piece

Condition: new, Year of construction: 2023, machine/vehicle number: P7YXXX, SINC Razzoor Series cable granulator is advanced-level cable and electronic waste recycling machine, with the compact design the machine becomes mobile, it can be easy moved to other locations and works like plug and play machine. Credpfx Aiehukfmjiji The machine is equipped with all needed to work independent, just supply the electricity and you can start to recycle your cable or electro waste, for to separate the coper, metals, lead or other ferrous or nonferrous metals from the plastics.

Condition: excellent (used), Cable duct, cable tray, cable channel, cable route, cable profile, protective conduit, protective profile -Cable duct: 61 pieces Crsdpfx Asgxgl Nsiisi -Dimensions: 3000 x 50 x 37 mm -Material: Steel, galvanized -Price: complete -Dimensions: 3000/820/H120 mm -Weight: 212 kg

Condition: as good as new (ex-display), Year of construction: 2024, The ideal machine for shredding cables, including optimized cutting geometry, approximately 9 operating hours. Motor: 18.5 kW; 400 V - 50 Hz - 3 phase, Knives: 14 pieces, 40x40mm, multi-rotatable, Rotor diameter: 260 mm, Control: Omron PLC, Cutting chamber opening 600 x 800 mm, Hopper volume approx. 0.6 m³, Hydraulically actuated slide Screen size optional (15 - 40mm) Extraction nozzle Ø 160 mm Weight approx. 1,300 kg Dimensions (l x w x h) approx. 1737 x 1167 x 1650 mm The following options are available at an additional cost: - Double knife row + €1,990 net (28 instead of 14) - Surcharge for 4-sided segment base + €2,170 net (prevents the slide from jamming. Recommended when shredding plastics, paper, veneer with a thickness of less than 3 mm). - Raise shredder by 30 cm (preparation for conveyor belt) + €1,980 net - Inclined conveyor belt (discharge height approx. 220 cm) + €8,770 net Cjdpogmfa Aefx Aiisri - Over-band magnet + €6,980 net - Control for conveyor belt and over-band magnet + €2,750 net (Start and stop synchronized with the shredder) Bea9ia3l27 Requirements for the raw material: - Mineral impurities such as sand, stones, etc. lead to increased wear. We would be happy to offer a free test with your material. We invite you to visit us in Neckartailfingen for this purpose. Alternatively, you can send us your material by freight forwarder and we will document the test with photos and videos.

Year of construction: 2022, condition: new, Cable stripping machine G.R.S. 9 This incredible machine strips 33 meters cable per minute. You need 380 volts and 3 kW, but the processing capacity of about 2 mm to 80 mm, is reasonable. With a mass of 405 kg, you can move the machine short distances on it's own wheels - for longer distances a other transport method is necessary. The criteria for this machine: Very fast and reliable processing of cable thicknesses between 2 mm and 80 mm. Crsdpfxehpcnqo Aiiji Technical Data: Cutting speed: 33 Meter / min. (forward) 23 Meter / min. (backwards) Processing capacity: Ø 2 mm — Ø 80 mm Motor power: 3000 Watts Voltage: 380 Volt Weight: 405 Kg Dimensions in cm: 108 × 85 × 120 Color: blue

Year of construction: 2022, condition: new, Wire stripping machine G.R.S. 5 Crodpfxohpcprs Aiiei This is the second model by G.R.S., what stands on its own feet. Compared to the G.R.S. 4 this model weighs about double, has 30% more power and requires 380V for operation. Technical Data: GRS 5 10mm - 90mm Dimensions: W / H / D 78 cm / 120 cm / 84 cm Weight: app. 220 Kg Cutting speed: 30 Meters p. Minute Engine: 380V / 3000W Stripping of cables with a cross section of 10 - 90 mm and an insulation thickness up to 20 mm.

Condition: used, dimensions 2,000 x 1,290 mm thickness of the plate 95 mm Crjdpfx Aisn Stakoiei T - slots width 30 mm weight appro. 1,700 kg

Condition: good (used), Clamping bracket, T-slot plate, clamping table, clamping cube, clamping plate, clamping tower, clamping box -Clamping cube: with T-slots, heavy-duty version -Material: Cast iron Crodpolbdlhsfx Aiiji -Groove width: 20 mm -Groove spacing 69 mm -Dimensions: 245/165/H130 mm -Weight: 15.1 kg

Condition: used, Ground cable for inert gas device, electrode device, stud welding device, MIG/MAG hose package Cjdskx Sr Rspfx Aiiori -Welding cable: MIG/MAG hose package extension -Length: 30m -Plug: 10 pin -gas hose -Cooling water hoses -Transport dimension: 760/760/H400 mm -Weight: 47 kg