Used Bystronic Byjet 4022 for sale (171)

Condition: ready for operation (used), Year of construction: 2015, Bystronic Xact 160 Ton x 4100 mm 4 Axis Back-gauge. HydraulicCrowning. Laser Guarding. ByVision 3D Touch Screen Control. Upper & Lower Tooling. can load to Suitable Transport Pjdpfx Ahexhf Rnj Hjgg

Condition: excellent (used), functionality: fully functional, Year of construction: 2016, operating hours: 28,300 h, machine/vehicle number: 16500126, Press force: 400 kN Total bending length: 1030 mm Standard stroke [S]: 200 mm Clearance [D]: 515 mm Distance between columns: 1060 mm Table width: 60 mm X-axis backgauge travel range: 500 mm X-axis travel: 300 mm X-axis travel speed: 1500 mm/s R-axis travel: 100 mm R-axis travel speed: 500 mm/s Z-axis travel: 955 mm Z-axis approach speed: 2000 mm/s Y-axis approach speed: 300 mm/s Maximum Y-axis bending speed: 25 mm/s Y-axis positioning accuracy: 0.004 mm Oil capacity: 100 l Main drive power: 7.5 kW Weight: 4 t Length, approx. [L]: 1520 mm Width, approx. [W]: 1584 mm Height without increased clearance and stroke, approx. [H]: 2449 mm 1. Intelligent control system and drive with an exceptionally low noise emission (below 75 dB) in the Xpert 40 enables part production with about 30% lower energy consumption compared to conventional electrically-driven machines. 2. ByVision software with a 22-inch LCD display and touch technology Pedjwv N Naopfx Ah Hogg 3. Intelligent process control guidance with Energy Saver 4. Automatic tool protection system 5. Foot pedal 6. Electrically operated protective sliding doors 7. User manual on CD 8. Ambient temperature from 7°C to 35°C 9. Voltage: 400 V, 50 Hz, 3 Ph 10. 'Bend G2' – optical safety system with manual height adjustment 11. 6-axis backgauge (3 additional axes) 12. 3-backgauge set - Xpert 40 (N0002.0040.000) - Set for integrating a third backgauge in the press brake 13. Ergonomic LED lighting package - Light output: 1500 lux 14. Ergonomic front supports with table. Max. load is 35 kg. 15. 'At your fingertips' tool cabinet - accommodates 3m of tools within easy reach (1 set of punches and 2 sets of dies). 16. Optical bending guidance system – the operator is guided throughout the bending process by the optical guiding system. 17. Ergo Bending Line Laser – Bystronic Bending Line Laser serves as a visual assistance for the operator by projecting a bending line on the material surface. The operator is supported by a virtual bending line when the backgauge fingers cannot be used (fully or partially). The laser line can be set at different heights depending on the die height (e.g., 55 / 100 mm), depending on material thickness or workpiece size. 18. Productive XPT clamping package (WILA NSCL II upper tool clamp and T12/90 table) 19. WILA hydraulic clamping package includes both upper and lower tool clamping with T12/90 table. 20. WILA NSCL II/XPT upper tool clamping (Productive clamping pack XPT) – XPT-type (Wila) upper tool clamping allows tool mounting in 0 and 180° orientations. 21. T12/90 table (Productive XPT clamping package) – T12/90 table with a height of 90 mm and width of 72 mm offers extensive space for Z-bends. The machine is fully operational. In continuous use. Viewing and testing of the machine are welcome.

Year of construction: 2019, condition: good (used), Dust extraction,welding fume extractor,cartridge filter self-cleaning,pneumatic,vacuum for plasma,laser,sandblasting,sodding,blasting and all kinds of dry dust. Brand: TEKA / Bystronic Pgodpfxsnyhvqj Ah Heg Model: Filtercube 4H / FilterBys Version 2 Year of manufacture: 2019 Filter cleaned by microprocessor controller with compressed air pulses during operation thus high efficiency of the device. Low compressed air demand thanks to the system "Power-Spray" The Filtercube central filter unit equipped with cartridge filters is the ideal solution for almost all problems in the area of smoke and dust filtration. Fan on the clean side which reduces the risk of explosion to a minimum. Application: central extraction system for multiple welding stations extraction system for welding robots extraction system for thermal cutting and grinding tables system for general hall filtering (push-pull system, displacement system) extraction system in combination with an extraction table extraction system for grinding of non-exploitable materials Parameters: 5.5 Kw fan Capacity 3800 m3/h Vacuum pressure 3250 Pa Inlet diameter : 250 mm Filtration area of 100 m2 Equipped with "DUST-VAC" unit , which automatically pumps the dust into a separate tank. Possibility to order new filter cartridges tailored to the customer's needs Technical documentation included.

Condition: good (used), Year of construction: 1997, Lifting capacity: 1.300 kg Max. sheetsize: 4.000 x 2.000 mm No. of cups: 19 pieces Pgedswavukjpfx Ah Hog Size LxWxH: 480 x 200 x 250 cm Weight: 1.400 kg

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2008, operating hours: 42,664 h, machine/vehicle number: 8560012, stroke length: 265 mm, travel distance X-axis: 600 mm, travel distance Z-axis: 2,900 mm, pressing force: 320 t, travel distance R-axis: 250 mm, TECHNICAL DETAILS Pressure force: 320 t Bending length: 4100 mm Clearance between the columns: 3750 mm Thrust: 400 mm Stroke: 265 mm Installation height: 550 mm Table width: 60 mm Oil content: 600 l Axes & travel paths Controlled axes: Y1, Y2, X, R, Z1, Z2 X-axis travel path: 600 mm R-axis travel path: 250 mm Z-axis travel path: 2900 mm MACHINE DETAILS Machine dimensions (LxWxH): 5000 x 2300 x 4020 mm Machine weight: 29,000 kg EQUIPMENT - Hydraulic crowning - Side protective grilles Pgedsv E I Smepfx Ah Hjg - Protective grilles behind the machine - Light barrier FIESSLER Machine is delivered without tools

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2009, operating hours: 38,732 h, working width: 3,100 mm, travel distance X-axis: 600 mm, back gauge speed R-axis: 200 mm/s, back gauge travel distance R-axis: 250 mm, pressing force: 130 t, TECHNICAL DETAILS Control: MMC ByBend Pgsdpfjv E Iu Ujx Ah Hog Working area Bending length: 3100 mm Column clearance: 3200 mm Pressing force: 130 t Working height: 1060 mm Thrust: 250 mm Stroke: 400 mm Installation height: 915 mm Axes & travel paths Controlled axes: Y1 - Y2 - X1 - X2 - R1 - R2 - Z1 - Z2 X-axis travel path: 600 mm X-axis travel speed: 500 mm/s R-axis travel path: 250 mm R-axis travel speed: 200 mm/s Y-retraction: 150 mm/s Y-working speed: max. 1-10 mm/s Y-rapid traverse: 150 mm/s Back stop: 1200 mm MACHINE DETAILS Machine dimensions (LxWxH): 4440 x 2950 x 3100 mm Machine weight: approx. 13,400 kg EQUIPMENT - Tool holder with hydro cushion (top) and 3-point die holder (bottom) with hydraulic tool clamp - Sliding table for flattening operations - BWS-T protective devices as access protection at the rear (Sick safety curtain) & BWS at the front - Bending aid at the rear (0-75°) with brush inserts, H, A, W axes continuously programmable - Pair of stop fingers (complex) - Side stop for dies - Table extension (station) left for supports - Additional plates for dies V=60 and larger - Additional foot switch for second operator or station - Articulated arm for control Extensive tool package included in delivery

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2011, bending force (max.): 100 t, working width: 2,050 mm, stroke length: 315 mm, TECHNICAL DETAILS Pressure: 100 t Bending length: 2,050 mm Stroke: 315 mm MACHINE DETAILS Weight: 8,000 kg Pedpfxeww E Tqj Ah Hsgg EQUIPMENT - Support arms - Lasersafe

Condition: like new (used), functionality: fully functional, Year of construction: 2018, operating hours: 5,666 h, laser hours: 5,666 h, laser power: 6,000 W, sheet thickness (max.): 25 mm, sheet thickness steel (max.): 25 mm, sheet thickness aluminum (max.): 30 mm, sheet thickness brass (max.): 15 mm, sheet thickness copper (max.): 12 mm, positioning speed: 100 m/min, positioning accuracy: 0.05 mm, repeat accuracy: 0.05 mm, workpiece weight (max.): 3,280 kg, power: 6,000 kW (8,157.72 HP), overall weight: 27,700 kg, total length: 22,450 mm, total width: 6,670 mm, total height: 2,565 mm, working range: 20,248,100 mm, Equipment: cooling unit, It is a machine with few working hours and no faults. All parts are original and its maintenance has been done by the authorized service. Pgjdpfx Ahowpii Te Hsg

Year of construction: 2005, condition: good (used), Laser power: 5200W Number of hours under power: 37849h Cutting time: 26111h Longitudinal stroke X: 3000mm Cross travel Y: 1500mm Pgodsfci Ecepfx Ah Hog Vertical travel Z: 150mm Cutting thickness Steel: 20mm Cutting thickness Stainless steel: 15mm Cutting thickness Aluminium: 12mm Charger: Bystrans Extended Resonator

Year of construction: 2006, condition: ready for operation (used), Table dimensions: 3000x1500mm, connected load: 52kW, operational hours counter ca. 28,000h, with Extraction TECHNO FILTER BFK-40 and shuttle table, without necessary software. Pgodpfshw E Elsx Ah Hog

Condition: ready for operation (used), Year of construction: 2008, Laser type: CO2, laser power: 2.2kW, working range X/Y/Z: 1500mm/3000mm/100mm, max. material thickness: aluminum: 8mm, mild steel: 10mm, stainless steel: 6mm, max. workpiece weight: 890kg. Positioning speed X/Y: 100m/min, simultaneous positioning speed: 140m/min, total energy consumption: 37kW, max. sheet weight: 70kg/m². Dimensions X/Y/Z: 6000mm/6400mm/2150mm, weight: approx. 13500kg. Psdpfx Aettv T Sjh Hegg

Condition: excellent (used), functionality: fully functional, Year of construction: 2011, Working length 5100 mm Pressing force 400 t Max. stroke 365 mm 34 kW 38 tons weight Pedpfx Aow Tqpheh Hegg

Condition: good (used), BYSTRONIC HYDRAULIC BENDING MACHINE 3100X150 TON, MAX STROKE 315 mm, RAPID STROKE DOWN 190 mm/s, WORKING CYCLE 10 mm/s, RAPID STROKE UP 150 mm/s, DIMENSIONS: 415X200X290cm (h) WEIGHT 11,000 KG Y1 Y2: hydraulic cylinder axes. X forward and backward axis of the register. R upward and downward axis of the register. Z1 and Z2 axes of the movement to the right and left of the stops. X1 or relative X which is the axis of the movement forward and backward of a single stop. Pjdevxipgspfx Ah Hogg 7 axes. The control also manages the hydraulic crowning, which can be considered the eighth axis.

Year of construction: 2017, condition: ready for operation (used), Laser power: 10kW (10000W), working range: 3000mm/1500mm, max. material thickness: mild steel: 25mm, stainless steel: 30mm, aluminum: 30mm, copper: 12mm, brass: 15mm. Positioning speed: 120m/min, positioning accuracy: +/-0.05mm, max. workpiece weight: 1100kg. Machine dimensions X/Y/Z: approx. 9500mm/3500mm/3500mm, suction dimensions X/Y/Z: approx. 1500mm/1500mm/4000mm, machine weight: approx. 12000kg, operating hours: approx. 17000h. Documentation available. On-site inspection is possible. Expected to be available from June 2025. Psdpfx Ahovyiqgo Hogg

Condition: excellent (used), Year of construction: 2012, back gauge travel distance R-axis: 2,700 mm, Bystronic ZPG 2700x3500 VR SP 1AS 2011 2300 x 4500 mm 15 mm 60 mm 1000 kg S-IGL-2284 R-L Pjdpfx Ahsvy Enze Hegg

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2010, operating hours: 44,092 h, laser power: 4,400 W, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, Regular maintenance by Bystronic UK TECHNICAL DETAILS Max. sheet size: 3,000 x 1,500 mm Control type: ByVision CNC02 Laser power Power: 4.4 kW (4,400 W) MACHINE DETAILS Switched on: 102,182 h Cutting time: 44,092 h Turbo blower hours: 2,987 h New turbo installed: end of 2023 Output coupler: 30,072 h Vacuum pump: 12,346 h EQUIPMENT - ByVision CNC02 control with CutControl - Bypos automatic focus adjustment - Torit dust collector for efficient extraction Pedsvy Ertopfx Ah Hsgg - Tools and accessories - 2 cutting heads

Condition: used, functionality: fully functional, Year of construction: 2011, Bystronic / 2300 x 4500 mm R-L 2300 x 4500 mm (new press in 2011 of 2700 x 3500 mm) Pgedpfjrr Tmcjx Ah Hjg 15-60mm 1000kg Washer GW D 2300 VR 3 B 15 Gas press ZPG 2700 x 3500 mm VR SP 1 AS 15-60 mm 2300 x 4500 mm 1000 kg cy 2011 Sealing robot VA 1K-V 2300 x 4500 mm VR MOD PU ZD 15-60 mm 1000 kg 1-head sealing machine / 1 / GMR Stock Place: GMR ES

Condition: good (used), Year of construction: 2005, Sealing robot Pgsdpfx Ahjtwpatj Hjg VA 1K-V 2300 x 4500 mm VR MOD PU ZD 15-60 mm 1000 kg

Condition: good (used), Year of construction: 2012, Bystronic manual butyl extruder Type: BEZ Podpfx Aovzky Sjh Hegg Frame dimensions The following minimum and maximum dimensions for the frames to be processed must be observed: Minimum dimensions Maximum dimensions 70 mm 4,000 mm Leg length (HR = LR) 5.0 mm 12.0 mm Profile height (HP) 4.0 mm automatic up to 24 mm / manual up to 35 mm S-IGL-2296

Condition: used, Year of construction: 2004, Bystronic laminated glass cutting table Lamicut 3700mm S-CUT-1212 Podjvzhh Hepfx Ah Hegg

Condition: excellent (used), functionality: fully functional, Year of construction: 2017, operating hours: 7,200 h, laser power: 3,000 W, sheet thickness steel (max.): 20 mm, sheet thickness aluminum (max.): 12 mm, sheet thickness brass (max.): 6 mm, sheet thickness copper (max.): 6 mm, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, workpiece weight (max.): 890 kg, Machine serviced annually by Bystronic Perfect condition - sold to make room for construction of new building. TECHNICAL DETAILS Sheet dimensions: 3,000 x 1,500 mm Cutting range: 3,048 x 1,524 x 70 mm Sheet weight: 890 kg Positioning speed X, Y / simultaneous: 100 / 140 m/min Podpfxovt Rtio Ah Hegg Positioning accuracy: ± 0.1 mm Repeatability: ± 0.05 mm Control: ByVision Laser: Fiber 3000 Laser power: 300 - 3,000 W Sheet thickness steel: max. 20 mm Sheet thickness stainless steel/aluminum: max. 12 mm Sheet thickness brass/copper: max. 6 mm Electrical connection power: 21.3 kW MACHINE DETAILS Total length: 11,000 mm Total width: 6,050 mm Total height: 2,565 mm Weight: 12 t Switch-on time: 14,991 h Operating time: 7,187 h Equipment: cooling unit, safety light barrier

Condition: excellent (used), Year of construction: 2011, operating hours: 1,934 h, functionality: fully functional, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 200 mm, water pressure: 3,600 bar, TECHNICAL DETAILS Operating hours: 1,900 h X-axis travel: 3,000 mm Y-axis travel: 1,500 mm Z-axis travel: 200 mm Water pressure: 3,600 bar EQUIPMENT - Two cutting heads for simultaneous processing Pgjdpfjvfm T Njx Ah Hjg - Drilling head for piercing holes 2 mm (e.g. MAX plates) - Glue gun for small parts - desludging unit in BIG Pack - Bysoft6 software

Condition: ready for operation (used), Year of construction: 2012, functionality: fully functional, machine/vehicle number: 10046216, travel distance X-axis: 4,000 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 150 mm, table length: 4,000 mm, table width: 2,000 mm, TECHNICAL DETAILS Travel Paths X-Axis: 4,000 mm Y-Axis: 2,000 mm Z-Axis: approx. 150 mm Cutting Area Cutting area: 4,000 mm x 2,000 mm Max. cutting pressure: 3,800 bar Control System: Bystronic CNC control MACHINE DETAILS Pump type: High-pressure intensifier pump Drive system: High-speed linear drives Material capability: Cuts nearly all materials Cutting method: Pure water or abrasive waterjet cutting Table type: Stainless steel slat cutting table Weight: 13,000 kg EQUIPMENT High-pressure pump unit Water filtration system Operator console with control panel Safety enclosures and light barriers Operating manuals + software CD-ROMs Pedpfjwy Nm Hox Ah Hegg Documentation

Condition: used, functionality: fully functional, Year of construction: 2017, control type: CNC control, working width: 1,030 mm, stroke length: 200 mm, overall weight: 4,000 kg, Hydraulic Press Brake Make: BYSTRONIC Model: Xpert 40 Year of Manufacture: 2017 Technical Specifications Manufacturer: BYSTRONIC Operating hours: approx. 9,500 h Model: Xpert 40 Year: 2017 Press capacity: 40 t Bending length: 1,030 mm Stroke: 200 mm Distance between frames: 1,060 mm Motor power: 7.5 kW Weight: 4 t Dimensions: L 1.52 x W 1.60 x H 2.45 m Equipment Pedpfx Ahjyficds Hjgg • 6-axis backgauge • Hydraulic clamping top & bottom • RF-A tool holder, top • Height-adjustable ByVision Bending display with 22-inch Full HD touchscreen • Support table • Ergo LED work area lighting • Low-noise Dynamic Drive System (DDS) with integrated EnergySaver • OPC Interface Bending • Bend curve generator • Automatic tooling overload protection • Oil cooler • Ergo foot switch • Rear sliding door with electrical monitoring All details without obligation. A powered demonstration is possible at any time in our showroom.

Condition: used, Year of construction: 2006, pressure 100 t Pgjdpfx Ahew Rf Hio Hjg chamfer lenght 3100 mm distance between columns 2550 mm column arm 400 mm table height 925 mm stroke 200 mm control Cybelec DNC 8805 output 11 kw total connected load 15 kW weight of the machine ca. 9,0 t range L-W-H 5,2 x 2,1 x 2,9 m Used CNC- press brake - some upper tooling (no lover tooling) - Infrared security device - documentation - hydraulic Crowning - 2 axis backgauge X + R