Used Bun Attachment for sale (6,245)

Condition: new, power: 375 kW (509.86 HP), fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, brakes: retarder, color: white, gearing type: automatic, total width: 2,550 mm, total height: 4,000 mm, loading space length: 4,250 mm, loading space width: 2,470 mm, Year of construction: 2025, Equipment: ABS, air conditioning, all wheel drive, crane, electronic stability program (ESP), navigation system, parking heater, soot filter, VOLVO FH500 6x4 with FASSI F545RA2.27 and L214 Jib and Cable Winch Liftable drive axle Liftable axle Drive axle RTS2370A. Tandem, single reduction, hypoid type. Longitudinal and transverse differential locks. Gjdpfx Agox A Nn Tobstt Front axle load max. 10.0 t (technical) Rear axle load max. 21 t (technical) Volvo Dynamic Steering (VDS) 330 L aluminum tank, right side AdBlue tank usable volume 64 liters Rockinger 50 trailer coupling, for towing eyes with 50 mm diameter Electrical connection for trailer, 15-pin Euro 6, Step E - onboard diagnostics Cab color: Signal White Heated and electrically adjustable rearview mirrors, wide-angle mirrors on both sides, ramp mirror on passenger side Front mirror Exterior sun visor LED main headlights Headlamp cleaning system Automatic switching between daytime running and dipped beam Automatic headlight leveling LED daytime running lights, “V-light” Front LED fog lights Static LED cornering light Two LED roof beacons (orange), mounted front of cab roof Cab roof penetrations, both sides Wiring for roof-mounted spotlights, max 280 W 2 air horns on the roof, controlled from steering wheel Roof antenna and CB radio preparation Accessory mounting rail, front Original manufacturer emblems/type designations Emission type plate (Euro...) L-plate (low noise vehicle -96) Flatbed body as steel/welded construction, permanently mounted, low-profile design Length approx. 4,800 mm, width approx. 2,480 mm Removable aluminum side boards, Suer brand, height 600 mm, anodized, both sides (right and left) Removable aluminum side boards, Suer brand, height 600 mm, anodized, both sides (right and left) Recessed lashing rings, 2,500 daN and 6,500 daN each side, in profiled slots with flexible positioning 6 stakes pockets per side (3 per side) Hydraulically extendable bed extension, approx. 1,200 mm, hot-dip galvanized, loadable up to 3,000 kg, extendable with lighting and underrun protection, deeply recessed if possible, radio remote-controlled Sturdy front wall consisting of welded frame with recessed stake storage pockets Cladding plates, mudguards in checker plate, sand-blasted and powder-coated and painted in vehicle color Toolboxes between the rear axles with checker plate 5 toolboxes, checker plate natural finish, manufacturer BROSSBOX with ventilation. Size and arrangement depend on wheelbase and available space Sand-blasted, powder-coated and painted in vehicle color Installation of underrun protection at the rear and additional outriggers, including installation of all hydraulic and electrical connections (Duomatic and standard). Arrangement of sockets/pneumatics F545RA.2.27 xe-dynamic » Base unit Winch type V 20 for twin-line operation with folding sheave and accessories. Infinite slewing range All hydraulic cylinders double acting Piston rods hard chromed Double linkage system with PROLINK (knuckle boom can be over-extended by up to 15°) Electronic overload cut-off system with FX500 FASSI stability control FSC-S/II incl. LMB II Emergency shutoff and optical alarm at 90% and 100% Pressure relief and load-holding valves XF system (Extra Fast) + XP system (Extra Power) RCH or RCS FASSI radio remote control with linear levers and display of pressure values (in bar and %) and 90% + 100% warning in the display Danfoss D850 valve block with 4 control valves mounted on crane column Emergency operation for crane control High-pressure filter supplied plumbed Separate hydraulic tank (180l) with filter

Condition: used, functionality: fully functional, machine/vehicle number: 805461, first registration: 05/2005, Year of construction: 2005, operating hours: 10,500 h, LSV832 Type of Item: Agricultural Machine Equipment for maize harvesting Application: Transport technology Machine type: Overloading machine Gtodsxc I Tbspfx Agbst Manufacturer: Palandt Nawaro Model: Bunkermaus Vehicle Identification Number: 805461 Registration: Vehicle deregistered Year of manufacture: 2005 First commissioning: 01.06.2005 Service / Unladen weight: 23 t Colour: Yellow, Cream Paint: Solid / Synthetic resin / Single-layer Upholstery / Colour: Fabric / Anthracite Transmission: Continuously variable (CVT) Estimated operating hours: 10,500 hours Fuel type / Power source: DIESEL Type: MAN Number of cylinders: 6 Power: 191.2 kW Axle Size/Description Manufacturer Version Condition Remarks 1 L: 680/75/R32 164 A8 Michelin XM28 60% 1 R: 680/75/R32 164 A8 Michelin XM28 60% 2 L: 680/75/R32 164 A8 Michelin XM28 60% 2 R: 680/75/R32 164 A8 Michelin XM28 60% Equipment: - Hopper with hydraulically folding side walls for 3m transport width - Suspended docking front wall - Transverse and longitudinal conveyor with forced drive, infinitely adjustable speed - Hopper volume approx. 15 m³ - Discharge reach: 13m - Intermediate and discharge conveyor belt, both side-clad - Loading capacity up to 900 m³/hour - Discharge belt 80cm wide - Unloading height 6m - Vehicle length 13.95m; width 3m; height 4m - Central lubrication - Auxiliary heating - Transfer camera - Agricultural tyres - Glazed cabin - On-board computer - Suspension seat - Windscreen wiper - Lighting system - Radio - On-board voltage 24V Condition and maintenance: Apart from the damages/defects described, the object is in a condition typical for its age and use. Maintenance record is missing. Damage description: - Engine air intake broken - Operator’s manual / on-board literature missing - No maintenance record - Air loss in left rear tyre - Cable torn off – see photo Current downtime is approximately 6-8 months. Vehicle is operational LOCATION: 24589 Dätgen, State: Schleswig-Holstein, Germany The machine can be inspected there by appointment. Transport must be organized by the buyer. We have a forwarding agent that can deliver throughout Germany. Additional photos available on request. Price: EUR 70,000 net / EUR 83,300 gross You are welcome to submit a price proposal. Reasonable counter-offers will be considered. For enquiries, please provide your complete contact details! You are also welcome to view the equipment on site. Just call to arrange a viewing appointment. This item comes from an insolvency proceeding and thus shows normal signs of use. Maintenance and professional cleaning are the responsibility of the buyer. Liability, reduction, or return is expressly excluded. Prior inspection is recommended, as the sale is as seen. All information and content is given without guarantee. Subject to errors and prior sale. The item is sold in the condition as inspected on site, as a used item with retention of title and to the exclusion of any warranty for apparent and hidden defects, particularly defects of a technical, quality-related, or performance-related nature and usability. Due to time constraints, only serious inquiries and price proposals will be answered! This is an advertisement solely for informational purposes. LOCATION: 24589 Dätgen, State: Schleswig-Holstein, Germany

Condition: new, functionality: fully functional, overall weight: 1,500 kg, total length: 4,825 mm, total width: 1,705 mm, total height: 2,914 mm, Year of construction: 2025, power: 5.5 kW (7.48 HP), input voltage: 400 V, Equipment: documentation/manual, emergency stop, type plate available, Applications & Customer Benefits: The ASCO SD COMPACT with Bunker is a powerful, semi-mobile screening machine for recycling, construction, and material processing. Designed for coarse materials such as soil, gravel, wood chips, and waste, it delivers high throughput and smooth, continuous feeding. The integrated bunker ensures steady material flow and efficient pre-screening, while the foldable, modular design allows fast setup and reliable operation across diverse sites. Key Features: • Integrated bunker with conveyor belt for steady, continuous material feed • Adjustable drum rotation speed and screen inclination • Modular design with interchangeable drums and quick replacement system • Vibration support, cleaning brush, and reversible drum rotation Gedpowyuuiofx Agbstt • Robust, foldable frame for easy transport and long service life Tech Highlights: Outer drum Ø 1.3 m · Drum L 2.1 m · Qmax 60 t/h · n 5–20 rpm · P 5.5 kW (SD Compact) + 2.2 kW (Bunker) · Hopper opening 2.47 × 1.57 m · Usable screening area 7 m² · Mesh size Ø 6–Ø 100 mm · Filling height 1.81 / 2.91 m · Weight 2,250 kg · Length 4.82 m · Width 1.71 m · Height 1.81 / 2.91 m

Condition: good (used), functionality: fully functional, Year of construction: 2016, operating hours: 500 h, Bunker dosing belt by R&T Recycling Technik Year of manufacture: 2016 Capacity: 2.5 m³ Drive: 1.5 kW Gtjdpfx Aexcuvijgbet Frequency-controlled feed belt This system was integrated into a small pilot plant for approximately 3 months in 2016. The unit is in excellent condition and ready for operation. As shown in photo no. ..., this unit can be transported on a large tandem car trailer.

Condition: good (used), Ifsys Type: 114100 Type: VL 13 Feed system for screws Bunker system with 2x Vibroliner and 2x Vibrobunker Gtedpfxeciqi Nj Agbst 1x return belt 2x control unit FC 1000 Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data, information is subject to change!) We will be happy to answer any further questions you may have over the phone.

Condition: good (used), Rexroth Belt Bunker Nominal volume: approx. 50 liters Conveyor belt: 1000 x 400 mm Bunker tub: stainless steel Frame construction: aluminum profile Mobile on wheels Motor type: MS56A/4 0.09 kW Length: 1300 mm Gsdjxzfbaspfx Agbstt Width: 620 mm Height: 1190 mm Find more items – new and used – in our shop! International shipping costs on request!

Condition: new, power: 375 kW (509.86 HP), fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, brakes: retarder, color: white, gearing type: automatic, total width: 2,550 mm, total height: 4,000 mm, loading space length: 4,250 mm, loading space width: 2,470 mm, Year of construction: 2025, Equipment: ABS, air conditioning, all wheel drive, crane, electronic stability program (ESP), navigation system, parking heater, soot filter, VOLVO FH500 6x4 with FASSI F545RA2.27, L214 Jib, and Winch Liftable drive axle Liftable axle Drive axle RTS2370A. Dual-axle single reduction, hypoid type. Longitudinal and transverse differential locks. Front axle load max. 10.0 t (technical) Rear axle load max. 21 t (technical) Volvo Dynamic Steering (VDS) 330 L aluminum tank on the right AdBlue tank usable capacity 64 liters Godpfx Aox A Npdjgbott Rockinger 50 trailer coupling, for towing eyes with 50 mm diameter Electrical connection for trailer, 15-pin Euro 6, Stage E - Onboard diagnostics Cab color: signal white Heated and electrically adjustable mirrors, wide-angle mirrors on both sides, kerb mirror on passenger side. Front-view mirror Exterior sun visor LED main headlights Headlamp cleaning system Automatic light switching between daytime running and dipped beam Automatic headlamp leveling Daytime running light LED, "V-light" LED front fog lights Static LED cornering light Two LED beacon lights (orange), mounted on the front of the cab roof Cab roof pass-throughs, both sides Pre-wiring for roof-mounted headlights, max 280 W 2 air horns on the roof, controlled from the steering wheel Roof antenna and CB radio preparation Roof bar for accessories, front Emblems/type designation factory-mounted Emission type plate (Euro...) L plate (low-noise vehicles -96) Flatbed executed as steel/welded construction, fixed-mounted, low design. Length approx. 4800 mm, width approx. 2480 mm Removable aluminum drop sides, make Suer, height 600 mm, anodized finish, per side (R and L) Removable aluminum drop sides, make Suer, height 600 mm, anodized finish, per side (R and L) Recessed lashing rings 2500 daN and 6500 daN per side, in slotted profile with flexible positioning 6 x stake pockets for stanchions (3 per side) Hydraulic extension of the flatbed up to approx. 1200 mm, galvanized, loadable up to 3000 kg, extendable with lighting and underrun protection, as low as possible, operable via radio remote control Robust front wall made of welded frame with recessed stanchion depot pockets Cladding panels, fenders made of tread plate, sandblasted, powder-coated and painted in vehicle color Toolboxes between rear axles fitted with tread plate 5 pcs. toolboxes, natural finish tread plate, manufacturer BROSSBOX with ventilation. Size and arrangement depend on wheelbase and available space. Sandblasted, powder-coated and painted in vehicle color. Mounting of rear underrun protection and additional stabilizer, including installation of all hydraulic and electrical connections (Duomatic and standard). Arrangement of sockets/pneumatics F545RA.2.27 xe-dynamic » Base unit Winch type V 20, for double-strand operation with folding pulley and accessories. Endless slewing range All hydraulic cylinders double-acting Piston rods hard-chrome plated Double knuckle lever system with PROLINK (overbending articulation up to 15°) Electronic overload cut-off device with FX500 FASSI stability control FSC-S/II incl. LMB II Emergency stop, as well as optical alarm (90% and 100%) Pressure relief and load-holding valves XF system (Extra Fast) + XP system (Extra Power) RCH or RCS FASSI radio remote control with linear levers and display of pressure values (in bar and %) and 90% + 100% warning on the display Danfoss D850 control block with 4 control valves mounted on the crane column Emergency control for crane operation High-pressure filter supplied pre-piped Separate hydraulic tank (180 l) with filt

Condition: new, Year of construction: 2025, functionality: fully functional, warranty duration: 24 months, input voltage: 400 V, DGUV certified until: 12/2026, total length: 700 mm, total width: 600 mm, total height: 1,520 mm, type of input current: three-phase, power: 1 kW (1.36 HP), electrical fuse: 10 A, Semi-automatic dough divider and rounder, bun press for burger buns, pita, burek, flatbread, etc. Model: Divobun 4-14 NEW Proven, advanced technology — a trusted solution! Stainless steel blades with easy cleaning position! Supplied with 3 rounding plates Portion range: 130 to 400 grams per piece TOP dough divider Mobile machine (on wheels) Exclusive to us: DGUV V3 safety inspection Connection: 400V, 16A CEE plug Dimensions: 600 x 700 x 1520/2200 mm (W x D x H) Brand new machine 2-year warranty plus spare parts service Options: - Leasing & rental service Gtodorkzgwepfx Agbjt - Maintenance contract - Service package - Stainless steel machine stand - Delivery service - Additional rounding plates - Training & commissioning Other top dough dividers in stock!

Year of construction: 2025, condition: new, functionality: fully functional, power: 2.2 kW (2.99 HP), overall weight: 820 kg, total length: 2,560 mm, total width: 1,700 mm, total height: 1,820 mm, input voltage: 400 V, Equipment: documentation/manual, emergency stop, type plate available, Applications & Customer Benefits: The ASCO Bunker-BC enhances material handling efficiency for quarries, recycling plants, and construction sites. Ideal as a standalone unit or an add-on to the SD Compact system, it boosts throughput by up to 50%, ensures continuous material feeding, and reduces downtime for higher productivity. Key Features: • Robust, high-performance drum bunker for long service life • Bidirectional hopper belt for flexible material flow • Quick-change hopper belt for minimal maintenance • Fully electrical control with frequency converter Gedpfx Aew Afdajgbott Tech Highlights: W 1.70 m · L 2.56 m · H 1.82 m · Qmax 90 m³/h · Power 2.2 kW (400 V) · Bunker belt W 0.6 m · Filling H 2.16 - 2.66 m · Weight 820 kg

Condition: used, mileage: 9,925 km, power: 200 kW (271.92 HP), first registration: 07/2017, fuel type: diesel, empty load weight: 9,450 kg, maximum load weight: 8,550 kg, overall weight: 18,000 kg, tire size: 315/70R22.5, axle configuration: 4x4, wheelbase: 4,200 mm, brakes: engine braking, color: white, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: steel, number of seats: 3, loading space length: 5,740 mm, loading space width: 2,490 mm, loading space height: 2,070 mm, Equipment: ABS, air conditioning, all wheel drive, cabin, central locking, cruise control, differential lock, fog lights, onboard computer, parking heater, power assisted steering, seat heater, trailer coupling, Vehicle location: Bovenden. ClassicSpace cab, Mercedes PowerShift 3, factory delivery, 1x comfort seat, double passenger bench, seat heating, electric mirrors, heated mirrors, left electric window, right electric window, air conditioning, sun visor, cruise control, auxiliary heater, ABS (anti-lock braking system), constant throttle, differential lock, fog lights, high-beam headlights, storage box, fire extinguisher compartment, leaf suspension, trailer coupling with air and light connections, lashing eyes, underrun protection, side aluminium underride guard, roof hatch, green environmental sticker. Gjdpfx Aoxx S I Ujgbott Wheelbase: 4200 mm. Body: flatbed with tarpaulin, 7.5t front axle, front axle differential lock, rear axle crown wheel 300 planetary 13.4t, electronic braking system with ABS and ASR, ABS can be deactivated, drum brakes on front and rear axles, condensate monitoring for compressed air system, stabilisers on front and rear axles, residual heat utilisation, hot water auxiliary heater, construction site filter, PSM, comfort locking system, off-road driving programme, Mercedes PowerShift 3, pre-installation for toll collection, LED daytime running lights, skid plate under the bumper, transmission oil cooling, Powertrain Pack 1. Loading height approx. 1440 mm! Spare wheel available at extra cost! ACCESSORY SPECIFICATIONS WITHOUT GUARANTEE, subject to changes, prior sale, and errors!

Condition: used, functionality: fully functional, For sale are several spindle motors and servo motors from the manufacturers Mitsubishi, Siemens, and Mazak. The technical condition of the motors has been checked, and they are ready for immediate use. MITSUBISHI: • Mitsubishi Spindle Motor SJ-4-VKS15-13ZM (2004) • Mitsubishi Spindle Motor SJ-4-KS15-U62M (2000) • Mitsubishi Servo Motor HC-H153S-A47 (2004) • Mitsubishi Servo Motor HC-SF52K-S1 (2x available) • Mitsubishi Servo Motor HC-SF52BK-S2 • Mitsubishi Servo Motor HC-H203BS (2004) • Mitsubishi Servo Motor HC153S-SZ (2x available) SIEMENS: • 3 Permanent Magnet Motors 1FT5064-0AF71-2-Z(F) (2x available) • 3 Permanent Magnet Motors 1FT5074-0AK71-2(F) The spindle motors are sold on an exchange basis. This means you receive a refurbished, tested spindle motor from us, while we receive your defective unit in return. As a result, your production can continue without major downtime and unplanned outages are minimized. Alternatively, you can commission a repair only. We take care of the entire process: we disassemble the spindle motor, repair or refurbish it in our workshop, and reinstall it afterwards. So you have a single point of contact for the entire process – from disassembly to commissioning, everything from one source! INFORMATION: We have a wide range of drive and servo motors for CNC machines and other machinery in stock, and we also offer repair services for them. Please send us your inquiry – we will promptly check availability for your machine. If you have any further questions, please feel free to contact us at any time. Our service promise: Gtodpfxjxwi Uce Agbet For us, quality, expertise, and customer satisfaction come first. Our team consists of qualified and experienced technicians specialized in Mazak machines as well as other machinery. We place great value on personal support and are happy to assist you even after your purchase. With us, you are in the best hands – professional, reliable, and with a passion for machinery! PS CNC Service Germany GmbH & Co. KG All information subject to change. No liability assumed.

Condition: new, functionality: fully functional, Year of construction: 2025, CONSTMACH vibrating feeder bunkers are high-efficiency equipment designed to ensure continuous and balanced feeding of crushers in stone crushing and screening plants. These bunkers are placed in front of primary impact crushers or jaw crushers to ensure a homogeneous flow of material. This increases the capacity of the crushers, balances the loads on the intermediate crushers, and ensures continuity in the overall production line. The vibrating feeding system prevents sudden loads, eliminating the risk of overloading on conveyor belts and thermal damage to equipment. Thanks to CONSTMACH's special design, the vibrations in the bunkers are smooth and balanced. This ensures both a steady material flow and extended machine life. Otherwise, uneven feeding could cause serious wear on crusher hammers, conveyor belts, and bearings. Using a vibrating feeder bunker helps reduce maintenance costs, increase operational efficiency, and maintain long-term performance throughout the facility. Vibrating Feeder Bunker Technical Specifications Model: CPG - 09 Body Size: 2,500 x 520 mm Grid Size: 820 mm Motor Power: 2 x 3 kW Bunker Volume: 8 - 10 - 15 m³ Capacity: 80 - 100 t/h Weight: 8,000 kg Model: CPG - 10 Body Size: 3,000 x 850 mm Grating Size: 1,160 mm Motor Power: 2 x 4.5 kW Hopper Capacity: 10 - 15 - 20 m³ Capacity: 150 - 200 t/h Weight: 12,000 kg Model: CPG - 11 Body Dimensions: 4,600 x 1,100 mm Grate Dimensions: 1,400 mm Motor Power: 2 x 9.2 kW Bunker Volume: 15 - 20 - 30 m³ Gedpfx Agjxpvkhjbstt Capacity: 200 - 300 t/h Weight: 18,000 kg Model: CPG - 13 Body Size: 4,880 x 1,370 mm Grating Size: 1,840 mm Motor Power: 2 x 11 kW Bunker Volume: 30 - 45 - 50 m³ Capacity: 350 - 500 t/h Weight: 26,000 kg Why Choose CONSTMACH Vibrating Feeder Bunkers? CONSTMACH is a trusted brand in the industry with years of engineering experience and high production standards. Our products stand out with their durable body structure, low maintenance requirements, and energy-efficient motor systems. Each one undergoes high-quality control processes to ensure long-lasting use. CONSTMACH Vibrating Feeders increase the performance of your crushing plant while minimizing your operating costs. If you are looking for quality, durability, and maximum efficiency, CONSTMACH is the right solution. What Do We Do at Constmach? Constmach is a leading machine manufacturer serving the construction and mining industries with a wide range of products. Our product portfolio includes concrete block making machines, stationary and mobile concrete plants, stone crushing machines, stone crushing and screening plants, sand washing machines, sand making machines, asphalt plants, conveyor belt systems, jaw crushers, and mobile crushing plants. With its high quality standards, innovative production approach, and customer-focused solutions, Constmach stands out as a reliable brand in both national and international markets. Our products continue to be the preferred choice of industry professionals due to their durability, efficiency, and long-lasting performance.

Condition: new, power: 375 kW (509.86 HP), fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, brakes: retarder, color: white, gearing type: automatic, total width: 2,550 mm, total height: 4,000 mm, loading space length: 4,250 mm, loading space width: 2,470 mm, Year of construction: 2025, Equipment: ABS, air conditioning, all wheel drive, crane, electronic stability program (ESP), navigation system, parking heater, soot filter, VOLVO FH500 6x4 with FASSI F545RA2.27 and L214 jib and winch Liftable drive axle Liftable axle Drive axle RTS2370A. Double axle, single reduction, hypoid type. Longitudinal and transverse differential locks. Front axle load max. 10.0 t (technical) Rear axle load max. 21 t (technical) Volvo Dynamic Steering (VDS) 330 L aluminium tank right side AdBlue tank usable capacity 64 litres Rockinger 50 trailer coupling, for towing eyes with 50 mm diameter Electrical connection for trailer, 15-pin Euro 6, level E – onboard diagnostics Cabin colour signal white Heated and electrically adjustable exterior mirrors, wide-angle mirrors on both sides, kerb mirror on passenger side. Front mirror External sun visor LED main headlights Headlight cleaning system Automatic switching between daytime running light and low beam Automatic headlight leveling Daytime running light LED, "V-light" LED front fog lights Static LED cornering light Two LED revolving beacons (amber), mounted on cab roof front Cable entry through cab roof both sides Wiring for roof-mounted spotlights, max 280 W 2 air horns on the roof, controlled from the steering wheel Roof antenna and preparation for CB radio Roof bar for accessories, front Factory-mounted emblems/type designation Emission type plate (Euro...) Gjdpfx Aox A Nntegbjtt L-label (low noise vehicles -96) Flatbed made of steel/welded construction, fixed-mounted, low profile Length approx. 4800 mm, width approx. 2480 mm Removable aluminium side walls by Suer, height 600 mm, anodised, each side (right and left) Foldable aluminium side boards by Suer, height 600 mm, anodised, each side (right and left) Recessed lashing rings, 2500 daN and 6500 daN per side, in perforated profile with flexible positioning 6 stake pockets per side (3 each) Hydraulic extension of bed approx. 1200 mm, galvanized, loadable up to 3000 KG, extendable with lighting and collision protection, recessed as low as possible, radio remote controlled Robust front wall consisting of welded frame with recessed stake pockets Panel cladding, mudguard in chequer plate, sandblasted and powder-coated, painted in vehicle colour Tool boxes between rear axles fitted with chequer plate 5 tool boxes, natural chequer plate finish, manufacturer BROSSBOX with ventilation. Size and configuration depend on wheelbase and available installation space. Sandblasted, powder-coated, painted in vehicle colour. Rear underrun protection and additional support installed, including all hydraulic and electrical connections (Duomatic and standard). Arrangement of sockets/pneumatics. F545RA.2.27 xe-dynamic » Base unit Winch type V20, for double cable operation with folding sheave and accessories Endless slewing range All hydraulic cylinders double-acting Piston rods hard-chromed Double knuckle boom system with PROLINK (overbending up to 15°) Electronic overload shutdown with FX500 FASSI stability control FSC-S/II including LMB II Emergency stop and visual alarm (90% and 100%) Pressure relief and load holding valves XF (Extra Fast) + XP (Extra Power) systems RCH or RCS FASSI radio remote control with linear levers and pressure display (in bar and %) and 90% + 100% warning on display Danfoss D850 valve block with 4 control valves mounted on crane column Emergency control for crane operation High pressure filter supplied plumbed Separate hydraulic tank (180 l) with filt

Condition: new, Year of construction: 2025, functionality: fully functional, warranty duration: 24 months, input voltage: 400 V, DGUV certified until: 12/2027, total length: 700 mm, total width: 600 mm, total height: 1,520 mm, input frequency: 50 Hz, power: 1 kW (1.36 HP), electrical fuse: 16 A, Semi-automatic dough dividing and rounding machine, bun press Sinmag Model: Divobun 3-40 NEW Proven, reliable technology – tried and tested many times! Stainless steel blades with easy-clean position! Supplied with 3 rounding plates Dividing range: 40 to 120 grams per piece 30-piece division Machine is mobile Only from us: DGUV V3 tested Connection: 400V, 0.75 kW, 16A CEE plug Dimensions: 600 x 700 x 1520/2200 mm (W x D x H) Brand new machine, SAB tested 2-year warranty + spare parts service Gsdpfx Agorkzf Sebott Options: - Leasing and rental service - Maintenance contract - Stainless steel machine stand - Rounding plates - E-Box - Delivery service - Commissioning/operation briefing by master baker Many more bun presses in stock!

Condition: used, functionality: fully functional, Year of construction: 2015, operating hours: 6,578 h, load capacity: 8,000 kg, lifting height: 4,705 mm, free lift: 1,555 mm, fuel type: diesel, mast type: triplex, construction height: 2,710 mm, fork length: 2,400 mm, drive type: Diesel, Diesel Forklift ISO Class: ISO Class 4 = 5,000 - 10,000 kg Mast Type: Triplex Transmission: Automatic Condition: Ready for operation and fully functional Technical Condition: Good Front Tyre Type: Superelastic Gjdpovxxr Refx Agbjtt Front Tyre Condition: 20 - 40% Rear Tyre Type: Superelastic Rear Tyre Condition: 60 - 80% Description: Price includes new safety inspection (UVV, with original Still parts used), NEW paintwork (original Still), fork length as requested, 6x NEW SE tyres front/rear 80 %. We are happy to arrange cost-effective transport for you. Lease-purchase possible! Video available on request. Sideshift, fork positioner, Lift height 2,380 mm, 4th valve, rear work lights, front work lights, heater, full cabin, full free lift, CE certificate, safety light.

Condition: used, mileage: 10,719 km, power: 200 kW (271.92 HP), first registration: 07/2017, fuel type: diesel, empty load weight: 9,450 kg, maximum load weight: 8,550 kg, overall weight: 18,000 kg, tire size: 315/70R22.5, axle configuration: 4x4, wheelbase: 4,200 mm, brakes: engine braking, color: white, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: steel, number of seats: 3, loading space length: 5,740 mm, loading space width: 2,490 mm, loading space height: 2,070 mm, Equipment: ABS, air conditioning, all wheel drive, cabin, central locking, cruise control, differential lock, fog lights, onboard computer, parking heater, power assisted steering, seat heater, trailer coupling, Vehicle location: Bovenden. ClassicSpace cab, Mercedes PowerShift 3, factory delivery, 1x comfort seat, double passenger bench, seat heating, electric mirrors, heated mirrors, left electric window, right electric window, air conditioning, sun visor, cruise control, auxiliary heater, ABS (anti-lock braking system), constant throttle, differential lock, fog lights, high-beam headlights, storage box, fire extinguisher compartment, leaf suspension, trailer coupling with air and light connections, lashing eyes, underrun protection, side aluminium underride guard, roof hatch, green environmental sticker. Wheelbase: 4200 mm. Body: flatbed with tarpaulin, 7.5t front axle, front axle differential lock, rear axle crown wheel 300 planetary 13.4t, electronic braking system with ABS and ASR, ABS can be deactivated, drum brakes on front and rear axles, condensate monitoring for compressed air system, stabilisers on front and rear axles, residual heat utilisation, hot water auxiliary heater, construction site filter, PSM, comfort locking system, off-road driving programme, Mercedes PowerShift 3, pre-installation for toll collection, LED daytime running lights, skid plate under the bumper, transmission oil cooling, Powertrain Pack 1. Gjdpfx Ajxx S Izjgbjtt Loading height approx. 1440 mm! Spare wheel available at extra cost! ACCESSORY SPECIFICATIONS WITHOUT GUARANTEE, subject to changes, prior sale, and errors!

Condition: used, Field of application: Construction CAT988 Marble Fork, Bucket and Quick Coupler Loader marble attachments are specialized tools designed to fit on loaders to handle, lift, and transport marble blocks safely and efficiently. These attachments are optimized to comfortably carry buckets, forks and quick coupler according to marble's weight. Their design ensures minimal damage to the marble while providing stability during transport and operations. Godpfx Agsphqrpsbstt These attachments are essential in quarries and processing facilities where large marble blocks are frequently moved.

Condition: new, power: 382 kW (519.37 HP), fuel type: diesel, overall weight: 32,000 kg, axle configuration: > 3 axles, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2025, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, soot filter, MAN 8x4 Hydrodrive with F1150 Fassi Loader Crane Gedjwmh Hrepfx Agbott Vehicle Description for: TGS 35.520 8x2H-6 BL CH Removable flatbed, Jost fifth wheel coupling, fully clad V2A Trade tonnage: 35 t 2,980 mm main wheelbase 1,795 mm wheelbase between front axles 1,350 mm wheelbase between rear axle and trailing axle Side-mounted exhaust silencer, right side Ground outlet exhaust 2 batteries, 12V, 210 Ah, Super Longlife (AGM), maintenance-free, for increased electrical requirements 390 l fuel tank capacity, left side 35 l AdBlue tank capacity, right side Air compressor, 1 cylinder, 360 cc, with economy system Pneumatically controlled air supply system Air tanks, steel Electronic Braking System (EBS) Anti-lock Braking System (ABS) Full emergency braking assistant Disc brakes on front axle Disc brakes on second front axle Disc brakes on rear axle Disc brakes on trailing axle Emergency brake signal, hazard warning activation LED side marker lights MAN D2676 LFAX diesel engine, 382 kW (520 hp) power, 2,650 Nm torque, Euro 6e Heated fuel filter, suitable for fuels up to cleanliness class 25 Pre-fuel filter with oil/water separator, with water sensor, heated (mixing valve) F1150RA.2.28 L616 Winch + 2-man basket (available on request at extra cost) Endless slewing range All hydraulic cylinders are double-acting Piston rods hard-chromed Double knuckle joint system with PROLINK (over-stretchable knuckle boom up to 12°) Electronic overload shutdown with FX900 FASSI stability control FSC incl. LMB II Emergency stop and visual alarm (90% and 100%) Pressure-limiting and load-holding valves XF system (Extra Fast) + XP system (Extra Power) + FL system (Full Lift) RCH or RCS FASSI radio remote control with linear levers and display of pressure values (in bar and %) and 90% + 100% warning on display Danfoss D900 valve block with 4 control valves mounted on the crane column Emergency operation for crane control High-pressure filter supplied plumbed Separate hydraulic tank (260l) with filter and oil cooler mounted on the crane base Hydraulic outriggers, extendable both sides hydraulically, support width 8.84m Outrigger control via radio with proportional valve block IMC system (Integral Machine Control) and ADC (Automatic Dynamic Control) = load-dependent speed control Standard color RAL 3020 traffic red – all cylinders painted black Load hook and mounting brackets (short/500mm) Transport position: folded crosswise to direction of travel Note: Observe board voltage / 12V or 24V, standard 24V FASSI Stability Control FSC-S/II 1 IE742 terminal box Low-profile subframe 180° hydraulically tiltable outrigger legs, both sides Control system for additional function (winch/xhe-dynamic) Control system for 2 additional functions with 2 hose guidance systems / xhe-dynamic Preparation for variable displacement pump (LS) Work light operable via display (1 b/w function) 1 LED work light mounted on knuckle boom LED for 2 outrigger legs, not mounted (crane) LED for 2 outrigger legs, not mounted (additional outrigger supports) GR.15 electrical rotary distributor with 15 slip rings FUNK-V7-RCS V7 RCS radio remote control Fassi radio remote control V7S: Available with 6 or 8 functions with linear levers or joysticks. V7S with 4.3" color display / 24bit - 480 x 272 px, with 8 push buttons Engine start/stop, RPM +/-, 6 x ON/OFF functions, 10m cable and various operating speed controls, incl. second battery, charger, neck and waist belt

Condition: new, Year of construction: 2025, functionality: fully functional, warranty duration: 24 months, input voltage: 400 V, DGUV certified until: 12/2027, input frequency: 50 Hz, power: 1 kW (1.36 HP), electrical fuse: 16 A, NEW NEW Bun Press NEW NEW Semi-automatic dough dividing and rounding machine, Model: Divobun 3-30 NEW Proven, advanced technology – already widely used! Gtjdperkzghjfx Agbot Stainless steel knives with easy cleaning position! Includes 3 rounding plates Dividing range: 25 to 80 grams/piece 30-piece division Mobile machine Only from us: DGUV V3 tested Connection: 400V, 0.75 kW, 16A-CEE plug Dimensions: 600 x 700 x 1520/2200 mm (W x D x H) Brand new machine & SAB tested 2-year warranty + spare parts service Options: Delivery service Leasing & rental service Rounding plates Stainless steel machine platform Maintenance contract Service package Training / commissioning More top dough dividers in stock!

Condition: used, mileage: 13,031 km, power: 200 kW (271.92 HP), first registration: 07/2017, fuel type: diesel, empty load weight: 9,450 kg, maximum load weight: 8,550 kg, overall weight: 18,000 kg, tire size: 315/70R22.5, axle configuration: 4x4, wheelbase: 4,200 mm, brakes: engine braking, color: white, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: steel, number of seats: 3, loading space length: 5,740 mm, loading space width: 2,490 mm, loading space height: 2,070 mm, Equipment: ABS, air conditioning, all wheel drive, cabin, central locking, cruise control, differential lock, fog lights, onboard computer, parking heater, power assisted steering, seat heater, trailer coupling, Vehicle location: Bovenden. ClassicSpace cab, Mercedes PowerShift 3, factory delivery, 1x comfort seat, double passenger bench, seat heating, electric mirrors, heated mirrors, left electric window, right electric window, air conditioning, sun visor, cruise control, auxiliary heater, ABS (anti-lock braking system), constant throttle, differential lock, fog lights, high-beam headlights, storage box, fire extinguisher compartment, leaf suspension, trailer coupling with air and light connections, lashing eyes, underrun protection, side aluminium underride guard, roof hatch, green environmental sticker. Gtsdpexx S I Iofx Agbot Wheelbase: 4200 mm. Body: flatbed with tarpaulin, 7.5t front axle, front axle differential lock, rear axle crown wheel 300 planetary 13.4t, electronic braking system with ABS and ASR, ABS can be deactivated, drum brakes on front and rear axles, condensate monitoring for compressed air system, stabilisers on front and rear axles, residual heat utilisation, hot water auxiliary heater, construction site filter, PSM, comfort locking system, off-road driving programme, Mercedes PowerShift 3, pre-installation for toll collection, LED daytime running lights, skid plate under the bumper, transmission oil cooling, Powertrain Pack 1. Loading height approx. 1440 mm! Spare wheel available at extra cost! ACCESSORY SPECIFICATIONS WITHOUT GUARANTEE, subject to changes, prior sale, and errors!

Condition: used, mileage: 7,625 km, power: 200 kW (271.92 HP), first registration: 07/2017, fuel type: diesel, empty load weight: 9,450 kg, maximum load weight: 8,550 kg, overall weight: 18,000 kg, tire size: 315/70R22.5, axle configuration: 4x4, wheelbase: 4,200 mm, brakes: engine braking, color: white, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: steel, number of seats: 3, loading space length: 5,740 mm, loading space width: 2,490 mm, loading space height: 2,070 mm, Equipment: ABS, air conditioning, all wheel drive, cabin, central locking, cruise control, differential lock, fog lights, onboard computer, parking heater, power assisted steering, seat heater, trailer coupling, Vehicle location: Bovenden. ClassicSpace cab, Mercedes PowerShift 3, factory delivery, 1x comfort seat, double passenger bench, seat heating, electric mirrors, heated mirrors, left electric window, right electric window, air conditioning, sun visor, cruise control, auxiliary heater, ABS (anti-lock braking system), constant throttle, differential lock, fog lights, high-beam headlights, storage box, fire extinguisher compartment, leaf suspension, trailer coupling with air and light connections, lashing eyes, underrun protection, side aluminium underride guard, roof hatch, green environmental sticker. Wheelbase: 4200 mm. Body: flatbed with tarpaulin, 7.5t front axle, front axle differential lock, rear axle crown wheel 300 planetary 13.4t, electronic braking system with ABS and ASR, ABS can be deactivated, drum brakes on front and rear axles, condensate monitoring for compressed air system, stabilisers on front and rear axles, residual heat utilisation, hot water auxiliary heater, construction site filter, PSM, comfort locking system, off-road driving programme, Mercedes PowerShift 3, pre-installation for toll collection, LED daytime running lights, skid plate under the bumper, transmission oil cooling, Powertrain Pack 1. Loading height approx. 1440 mm! Spare wheel available at extra cost! ACCESSORY SPECIFICATIONS WITHOUT GUARANTEE, subject to changes, prior sale, and errors! Gjdjxx S Inepfx Agbstt

Condition: used, mileage: 8,330 km, power: 200 kW (271.92 HP), first registration: 07/2017, fuel type: diesel, empty load weight: 9,450 kg, maximum load weight: 8,550 kg, overall weight: 18,000 kg, tire size: 315/70R22.5, axle configuration: 4x4, wheelbase: 4,200 mm, brakes: engine braking, color: white, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: steel, number of seats: 3, loading space length: 5,740 mm, loading space width: 2,490 mm, loading space height: 2,070 mm, Equipment: ABS, air conditioning, all wheel drive, cabin, central locking, cruise control, differential lock, fog lights, onboard computer, parking heater, power assisted steering, seat heater, trailer coupling, Vehicle location: Bovenden. ClassicSpace cab, Mercedes PowerShift 3, factory delivery, 1x comfort seat, double passenger bench, seat heating, electric mirrors, heated mirrors, left electric window, right electric window, air conditioning, sun visor, cruise control, auxiliary heater, ABS (anti-lock braking system), constant throttle, differential lock, fog lights, high-beam headlights, storage box, fire extinguisher compartment, leaf suspension, trailer coupling with air and light connections, lashing eyes, underrun protection, side aluminium underride guard, roof hatch, green environmental sticker. Gedpoxx S Iuofx Agbett Wheelbase: 4200 mm. Body: flatbed with tarpaulin, 7.5t front axle, front axle differential lock, rear axle crown wheel 300 planetary 13.4t, electronic braking system with ABS and ASR, ABS can be deactivated, drum brakes on front and rear axles, condensate monitoring for compressed air system, stabilisers on front and rear axles, residual heat utilisation, hot water auxiliary heater, construction site filter, PSM, comfort locking system, off-road driving programme, Mercedes PowerShift 3, pre-installation for toll collection, LED daytime running lights, skid plate under the bumper, transmission oil cooling, Powertrain Pack 1. Loading height approx. 1440 mm! Spare wheel available at extra cost! ACCESSORY SPECIFICATIONS WITHOUT GUARANTEE, subject to changes, prior sale, and errors!

Condition: used, mileage: 12,205 km, power: 200 kW (271.92 HP), first registration: 07/2017, fuel type: diesel, empty load weight: 9,450 kg, maximum load weight: 8,550 kg, overall weight: 18,000 kg, tire size: 315/70R22.5, axle configuration: 4x4, wheelbase: 4,200 mm, next inspection (TÜV): 10/2026, brakes: engine braking, color: white, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: steel, number of seats: 3, loading space length: 5,740 mm, loading space width: 2,490 mm, loading space height: 2,070 mm, Equipment: ABS, air conditioning, all wheel drive, cabin, central locking, cruise control, differential lock, fog lights, onboard computer, parking heater, power assisted steering, seat heater, trailer coupling, Vehicle location: Bovenden ClassicSpace, Mercedes PowerShift 3, manufacturer's building, 1x comfort seat, double bench seat, seat heating, electric mirrors, heated mirrors, electric window left, electric window right, air conditioning, sun visor, cruise control, auxiliary heater, ABS (anti-lock braking system), constant throttle, differential lock, fog lights, high beam headlights, storage box, fire extinguisher box, leaf suspension, trailer coupling with air+light connections, lashing eyes, underrun protection, side aluminium underrun protection, roof hatch, green environmental badge. Gtodpfx Ajxqhlgsgbot Wheelbase: 4200 mm Body type: Flatbed with tarpaulin, 7.5t front axle, front axle differential lock, rear axle crown wheel 300 planet gears 13.4t, electronic braking system with ABS and ASR, ABS can be deactivated, drum brakes on front and rear axle, condensate monitoring for compressed air system, front and rear axle stabilizer, residual heat utilization, additional hot water heater, construction site filter, PSM, comfort locking system, off-road driving program, Mercedes PowerShift 3, pre-installed for toll detection, LED daytime running lights, protective plate under bumper, transmission oil cooling, Powertrain Pack 1. Loading height approx. 1440 mm! Spare wheel available at extra cost! ACCESSORY SPECIFICATIONS WITHOUT GUARANTEE. Subject to change, prior sale and errors excepted!

Condition: used, mileage: 12,375 km, power: 200 kW (271.92 HP), first registration: 07/2017, fuel type: diesel, empty load weight: 9,450 kg, maximum load weight: 8,550 kg, overall weight: 18,000 kg, tire size: 315/70R22.5, axle configuration: 4x4, wheelbase: 4,200 mm, next inspection (TÜV): 10/2026, brakes: engine braking, color: white, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: steel, number of seats: 3, loading space length: 5,740 mm, loading space width: 2,490 mm, loading space height: 2,070 mm, Equipment: ABS, air conditioning, all wheel drive, cabin, central locking, cruise control, differential lock, fog lights, onboard computer, parking heater, power assisted steering, seat heater, trailer coupling, Vehicle location: Bovenden. ClassicSpace cab, Mercedes PowerShift 3, metal body, 1x comfort seat, dual passenger bench, heated seats, electric mirrors, heated mirrors, electric window left, electric window right, air conditioning, sun visor, cruise control, auxiliary heater, ABS (anti-lock braking system), constant throttle, differential lock, fog lights, high beam headlights, storage box, fire extinguisher box, leaf suspension, trailer coupling with air and light connection, lashing eyes, underrun protection, side aluminum underrun guard, roof hatch, green environmental badge. Gtsdpjxqhk Nefx Agbot Wheelbase: 4200 mm. Body: Dropside with tarpaulin, 7.5t front axle, front axle differential lock, rear axle with 300 mm crown wheel planetary drive, 13.4t, electronic braking system with ABS and ASR (traction control), ABS deactivatable, drum brakes on front and rear axles, condensate monitoring for compressed air system, stabilizer on front and rear axles, residual heat utilization, additional hot water heater, construction site dust filter, PSM (parameterizable special module), central locking with comfort function, off-road driving program, Mercedes PowerShift 3, pre-installation for toll recording, LED daytime running lights, skid plate under bumper, transmission oil cooling, Powertrain Pack 1. Loading height approx. 1440 mm! Spare wheel available at extra cost! ACCESSORY DETAILS WITHOUT GUARANTEE. Subject to change, prior sale, and errors!

Condition: used, mileage: 14,938 km, power: 96 kW (130.52 HP), first registration: 02/1986, fuel type: diesel, empty load weight: 5,680 kg, maximum load weight: 1,920 kg, overall weight: 7,600 kg, tire size: 12.5R20, axle configuration: 4x4, wheelbase: 3,700 mm, color: red, driver cabin: day cab, gearing type: mechanical, emission class: none, suspension: steel, number of seats: 3, Equipment: all wheel drive, cabin, differential lock, Vehicle location: Bovenden, differential lock Godpjvhlg Tofx Agbstt Wheelbase: 3700 mm Construction: Box with roller shutters. ACCESSORIES INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale and errors! - .