Used Bsa Bpk 190 for sale (2,322)

Condition: new, power: 140 kW (190.35 HP), fuel type: diesel, brakes: retarder, color: white, gearing type: automatic, number of seats: 30, Year of construction: 2026, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, 2 new vehicles in production, model year 2026! Vehicle is built on a chassis from model 907 with GSR3 systems. Length: 8096 mm Width: 2380 mm (74 cm wider than the van) Height: 3140 mm - Base vehicle: 190 hp - 9-speed automatic transmission - Air suspension driver's seat with heating - Hot water auxiliary heater - Rear-view camera - LED headlights with fog lights - Distance Assist system (Distronic) - Leather steering wheel with steering wheel heating - 25 reclining seats (optional: 29) + tour guide + driver - Overhead storage compartments on the left and right / reading lamps with USB connections - Webasto / Diavia Madrid model 14.5 kW air conditioning system - Extra-large double glazing - Large panoramic windshield - Convector heaters on the left and right - Large rear trunk - Side storage compartments - Central locking for storage compartments - Bus-style rear - Appearance package (spoiler / radiator grille) - Air-supported rear axle Telma retarder Price: €149,990.00 net per unit, in white. Optional: Tenorite Gray metallic. Optional extras such as a refrigerator, etc., are available. Ndedpfez En E Tex Af Sob

Condition: used, Year of construction: 2012, The SAC F4TL window manufacturing centre is designed to meet the requirements of modern window production. It enables highly efficient, high-quality manufacturing with minimal setup time and without the need for tool changes. After machining, the workpiece is automatically returned to the operator. SAC F4TL CNC Window Manufacturing Centre – Machining Units Tenoning Side 1. Tenoning carriage 2. End trimming unit 3. Tenoning spindle Profiling Side 4. First profiling spindle 5. Second profiling spindle 6. Glazing bead notching unit 7. Hardware slot milling unit (optional) Feed System Tenoning Side 1. Tenoning carriage • Machining speed: 3–10 m/min • Return speed: 45 m/min • Table size: 290–955 mm • Motor power: 1.1 kW • Fence tilting angle: ±60° 2. End trimming unit • Saw blade diameter: 400 mm • Bore diameter: 30 mm • Motor power: 3 kW 3. Tenoning spindle • Vertical adjustment speed: 5 m/min • Spindle diameter: 50 mm • Spindle length: 620 mm • Vertical travel: 565 mm • Motor power: 7.5 kW • Maximum tool diameter: 350 mm Profiling Side 4. First Profiling Spindle • Spindle vertical adjustment speed: 5 m/min • Spindle diameter: 50 mm • Spindle length: 320 mm • Vertical spindle travel: 295 mm • Horizontal spindle adjustment: 60 mm • Spindle rotation direction: left/right • Motor power: 7.5 kW • Maximum tool diameter: 240 mm 5. Second Profiling Spindle • Spindle vertical adjustment speed: 5 m/min • Spindle diameter: 50 mm • Spindle length: 320 mm • Vertical spindle travel: 295 mm • Horizontal spindle adjustment: 60 mm • Spindle rotation direction: right • Motor power: 7.5 kW • Maximum tool diameter: 240 mm 6. Glazing Bead Notching Unit • Saw blade diameter: 200 mm • Saw blade bore: 30 mm • Horizontal spindle adjustment: 60 mm • Motor power: 2.2 kW Nodpfx Aozl D Dnof Sjdb Optional Unit 7. Hardware Slot Milling Unit • Motor power: 3 kW • Spindle diameter: 30 mm • Spindle length: 100 mm • Horizontal spindle adjustment: 60 mm • Vertical spindle adjustment: 60 mm • CNC-controlled with 2 vertical positions (maximum difference: 60 mm) • Maximum tool diameter: 190 mm Feed System • Feed speed: 4–20 m/min • Pneumatic workpiece clamping CNC Control and Software • 17" colour LCD monitor • 102-key alphanumeric keyboard • Operating system: Windows XP Professional Options • Hardware slot milling unit • Motorized NC-controlled stop • Return roller conveyor • Leitz IV 69 tool set • Leitz IV 90 tool set This machine is offered for sale on behalf of a customer. Viewing is available by prior arrangement. Please contact us through the platform's messaging system for further information and the relevant technical contact details.

Year of construction: 2020, condition: like new (used), As-new drying centrifuge For drying bulk parts For stain-free drying of workpieces after vibratory finishing Continuously variable speed control from 700 to 1100 rpm Adjustable hot air temperature Ndjdpfozzkw Tjx Af Sjb Max. batch weight 5 kg Basket: Ø270 mm x 190 mm Timer: 1–60 minutes Heating power: 2.1 kW Voltage: 230 V Dimensions: 70 × 50 × 95 cm (L × W × H)

Year of construction: 2020, condition: good (used), Lode Valiant 2 Sport Treadmill (2021/2022) – Lightly used in a clinical research setting – Includes a 1-month warranty. Smooth start at 0.0 km/h with precise control from 1.0–25.0 km/h in 0.1 km/h increments. The low-profile front cover leaves the athlete’s stride unobstructed and provides space for a mirror or camera at the front for real-time technique monitoring. Generous running deck: 70 × 190 cm standard; incline 0–25% for versatile protocols. XL option: 80 × 200 cm deck for larger subjects or high-speed work. Use cases: Sports medicine labs, CPET/stress testing, gait analysis, and high-performance training, where fine speed control and seamless device integration are essential. Ndjdpfszhicuox Af Ssb Also included: A comprehensive set of safety and usability features designed for continuous clinical use. Speed: Max: 25 km/h (15.5 mph) Min (operational): 1.0 km/h (0.6 mph) Adjustment step: 0.1 km/h (0.1 mph) Incline: Positive incline: 0–25% Adjustment step: 0.5% Optional decline: down to −10% (with accessory) Accuracy: Speed accuracy: ±5% Incline accuracy: ±0.5% Comfort / Capacity: Max user weight: 225 kg (496 lb) Certification: CE class Im (MDD 93/42/EEC) With optional SpO₂: CE class IIa With optional BPM: CE class IIa IECEE CB: certified

Condition: used, Year of construction: 1999, Optima/WIPOTEC-OCS EC automatic continuous scale 1400-700-585 Ndodpfoz Ecyrjx Af Seb RA2392 The automatic checkweigher including conveyor belt and SEW gear motor is designed for products up to a maximum of 60 kg. Technical data (see PDF for further details) Manufacturer: Optima Control Systems GmbH (WIPOTEC-OCS GmbH) Type: EC Year of construction: 1999 Machine type: automatic checkweigher Total size: approx. 1400 x 700 x 840 mm (WxDxH) Electrical connection Nominal voltage: L1/N/PE 230V AC / 115V AC (+6 % / -10 %) Nominal frequency: 50Hz / 60Hz (+/-2 %) connected load: 1,5 KW Fuse protection: 10 A Protection class: IP 65 according to DIN 40050 Weighing technology: Type of measurement: electromagnetic force compensation Weighing range: 0 - 60000 g calibration values e: from 1g degree of accuracy: from +/- 0,5g Temperature: 5° C - 40° C relative humidity 20 - 80 Volume: the A-weighted equivalent continuous sound pressure level is below 70 db(A) Conveyor belt 1390-700-590 and SEW gear motor with brake Conveying length (FL): 1400 mm effective width (NUB): 700 mm belt width (GB): 585 mm hight (BH): 740-840 mm Motor Type: SEW Gearmotor Motor Power: kW 0.55/0.55 S1 Hz 50 A 2.80/1.61 Speed: 10-36 m/min total weight: 190 kg Für eine individuelle, fachmännische Beratung setzten Sie sich einfach mit uns in Verbindung. Kontaktieren Sie uns einfach telefonisch oder per Mail. Wir helfen Ihnen gerne bei der Planung und Umsetzung Ihrer Projekte. Wir freuen uns darauf von Ihnen zu hören. Mit freundlichen Grüßen Ihr Team der Dr. Sonntag GmbH & Co. KG Ihr Spezialist und Ansprechpartner für Intralogistik

Condition: used, Year of construction: 2001, functionality: fully functional, total length: 1,900 mm, total width: 1,900 mm, total height: 2,900 mm, For sale: Wolfking mixer Ndjdpfx Afjzgt S De Sob Type: SFG1500/250 Dimensions: 185x210x295 cm Includes knife and sieves Manufacturer: Wolfking Danmark A/S 400V; 50Hz; 2001; 2000 kg Overall dimensions: height 290 cm, width 190 cm, length 190 cm Net price: 11,000 EUR

Condition: excellent (used), Here we offer you a Heraeus Vötsch temperature testing chamber. Heraeus Vötsch temperature testing chamber, water-cooled Temperature range: -70°C to +180°C Temperature deviation (time-related): ±0.1 to ±0.5 K Temperature deviation (spatial): ±0.5 to ±2.0 K Temperature change rate (cooling): 7.5 K/min Temperature change rate (heating): 7.5 K/min Thermal compensation +20°C: 3000 W Thermal compensation -20°C: 3000 W Test chamber dimensions: Width 580 mm, Depth 450 mm, Height 750 mm External dimensions: Width 870 mm, Depth 1280 mm, Height 1575 mm Observation window: Width 300 mm x Height 540 mm Test chamber volume: 190 liters Rated voltage: 3/N/PE AC, 400 V ±10 %, 50 Hz Rated power: 10.5 kW, Rated current: 22 A Fuse, on customer side: 32 A, slow-blow Sound pressure level at 1 m distance (free-field measurement): < 69 dB(A) Side access: 50 cm / 125 cm Chamber is water-cooled Refrigerant: R 404A and R 23 Weight: approx. 460 kg Type: VTS 7018-5 For your security as a buyer, please note the following information: The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of any necessary components Ndodpfezdtdhox Af Ssb 2. Refilling with refrigerants that comply with legal regulations 3. After successful inspection, the chambers are subjected to a test run, which is monitored with calibrated equipment. Condition: used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have over the phone.

Condition: new, power: 154 kW (209.38 HP), fuel type: diesel, brakes: retarder, color: white, gearing type: automatic, number of seats: 29, Year of construction: 2026, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, soot filter, 2 x new Iveco Daily vehicles with COC certificate, available for immediate delivery, equipped with GSR 3 systems. 1 x in black 1 x in white We are the representative of Ferqui in Germany. Ferqui is known for its high-quality fiberglass bodies. Ferqui has been using fiberglass since the late 1960s, making it one of the pioneers in this segment. The vehicles have a permissible total weight of 7200 kg and are therefore covered by the Iveco warranty. Iveco C70 chassis with automatic transmission and 210 hp Air-suspended rear axle, Telma auxiliary brake, LED headlights, auxiliary heater, driver's luxury seat with seat heating - Iveco Daily - 2 x touring buses on Iveco C70 chassis - Air-suspended rear axle - Telma - Length 8.59 meters, width 2.50 meters, height 3.1 meters - Fiberglass body Nodjz En Eyepfx Af Ssdb - Framework construction made of galvanized steel - Front air conditioning - Webasto air conditioning in the passenger compartment RT 190 = 19 kW (thus dual/AC) - Double glazing - Panoramic windshield - Electric front door with recessed entry - Entry height at the front, without lowering, maximum 300 mm - Rear emergency door - Total capacity for the touring bus: 29 (28+1+1) - USB ports at each row of seats in the touring bus - Luggage compartment on the left and right in the touring bus - Fresh air vents at each row of seats with service set - Convector heater - Iveco auxiliary heater with water and timer Touring bus has a 4.2 m3 luggage compartment - Rear luggage compartment - Spare wheel compartment - 2 side luggage compartments - Exterior color: white Price per unit: 169,990.00 Euro Net export possible.

Condition: good (used), functionality: fully functional, spindle mount: MK 4, For sale is a pillar drill press from the brand Alzmetall in good, used condition, as can be seen in the pictures. Technical data: • Manufacturer: Alzmetall • Model: AB4-SV • Speed: approx. 60 - 765 rpm • Spindle stroke: approx. 180 mm • Feed speeds: 0.15 / 0.2 / 0.3 / 0.36 mm/rev • Table size: approx. 600 x 450 mm • With coolant pump • Connection: 16A CEE plug Ndsdpfxszqnuus Af Sjb • Condition: Used, functional The machine can be inspected and tested at any time! Shipping costs via freight forwarder: approx. €190 International buyers are welcome! You will receive an invoice with VAT shown. Inspection / collection is possible by arrangement in 42855 Remscheid. Sale from location 42855 Remscheid, free loading. Errors in technical data and prior sale reserved.

Condition: excellent (used), functionality: fully functional, mileage: 170,000 km, first registration: 07/2001, fuel type: diesel, overall weight: 18,000 kg, wheelbase: 3,690 mm, fuel: diesel, brakes: other, emission class: euro3, suspension: other, Year of construction: 2001, Equipment: ABS, air conditioning, airbag, crane, fog lights, Iveco 190E 310 Eurotech Cursor Three-sided tipping body PM Series 12 crane with 4 hydraulic outriggers 4 Stabilizer legs Year: 07/2001 Ndodpjznl Dzefx Af Sob 2 axles, 4x2 configuration Euro 3 emission standard Diesel engine ZF 16-speed manual gearbox Engine displacement: 7,790 cc Power: 228 kW (310 hp) Wheelbase: 3,690 mm Tipping body length: 4,300 mm Overall truck length: 7,070 mm Payload capacity: 7,600 kg Gross vehicle weight: 18,000 kg Rear air suspension Differential lock Air conditioning ABS Electric mirrors and windows Radio Mileage: 170,000 km. DESCRIPTION: Iveco 190E 310 Eurotech Cursor Three-sided tipping body PM Series 12 crane with 4 hydraulic extensions 4 Stabilizer legs Year: 07/2001 2 axles (4x2) Euro 3 Diesel ZF 16-speed manual transmission Engine displacement: 7,790 cc Power: 228 kW (310 hp) Wheelbase: 3,690 mm Tipping body length: 4,300 mm Overall truck length: 7,070 mm Payload: 7,600 kg Gross Vehicle Weight (GVW): 18,000 kg Rear air suspension Differential lock Air conditioning ABS Electric mirrors and windows Radio Mileage: 170,000 km.

Condition: ready for operation (used), Year of construction: 2023, operating hours: 1,809 h, total width: 2,000 mm, total height: 1,800 mm, overall weight: 1,650 kg, controller manufacturer: SIEMENS, controller model: S7 with SIMATIC HMI Touch Panel, product length (max.): 2,400 mm, Circular Metal Saw manufactured in 2023. This PRESSTA EISELE PROFILMA 502 features a powerful 7.5 kW saw drive with a maximum saw blade speed of 2,850 rpm. It offers a cutting capacity of 270 x 150 mm and a maximum profile width of 270 mm. The machine includes a Siemens S7 control system with a touch panel for enhanced operation. If you are looking to get high-quality cutting capabilities, consider the PRESSTA EISELE PROFILMA 502 machine we have for sale. Contact us for further details. Technical Specifications • Saw Drive Power: 7.5 kW (7,500 W) • Duty Cycle: S6 • Saw Blade Speed: Max. 2,850 rpm • Power Supply: 400 V, 3-phase, 50 Hz • Current Consumption: 16 A • Operating Pressure: 6–8 bar Cutting Capacity • Maximum Cutting Width: 270 mm • Maximum Cutting Height: 150 mm • Maximum Cutting Diameter: 270 mm • Maximum Round Material Capacity (90°): 190 mm • Maximum Profile Width: 270 mm • Section Length Range: 3–4,000 mm • Minimum Remnant Length: From 75 mm (depending on profile) Saw Blade • Saw Blade Diameter: Ø550 mm • Saw Blade Bore: Ø40 mm Control System • PLC: Siemens S7 • HMI: SIMATIC Touch Panel • Controller: CPU 315 • Safety System: Flexisoft • Functions: • Piece counter • Batch multiplier for bundle processing • Cycle time display • Chain dimension management • Fault diagnostics Connectivity • Remote Access: IXON router with VPN connection Material Feed System • Drive Type: Electronic servo drive • Feed Stroke: 800 mm • Drive Mechanism: Ball screw spindle • Maximum Profile Length: 4,000 mm • Feed Support: Lift/lower roller support Saw Feed • Feed Type: Motorized • Feed Adjustment: Stepless Nsdpfx Afozi S R Re Ssdb • Cutting Direction: Bottom to top Clamping System • Type: Pneumatic horizontal and vertical clamping • Clamping Position: Feed and discharge sides • Pressure Control: 6 individual pressure regulators Lubrication • Lubrication Type: Intermittent spray system • Reservoir Capacity: 1 L • Features: • Level monitoring • Automatic shut-off Safety Features • Complete safety enclosure • Sound-insulated machine frame • Automatic machine shut-off at end of material stock • Cutting gap extension to protect cut surfaces Material Support • Infeed Conveyor: 740 mm roller conveyor with intrusion guard • Outfeed Table: 450 mm Pertinax support table with intrusion guard Extraction • Extraction Ports: 2 × Ø100 mm Chip Extraction Unit • Model: MG 3 (Italyvacuum Vortex 58 FT) • Year of Manufacture: 2022 • Motor Power: 3 kW • Voltage: 400 V / 3~ (±5%) • Current Consumption: 7.2 A • Weight: 130 kg • Features: • Integrated cyclonic separation system • Contactless antistatic system Additional Information • Machine can be inspected under power.

Condition: used, Little used European Spraydry Technologies model 8 - 19 Tall Form Spray 304 stainless steel ATEX rated spray dryer system. Mass balance design capabilities approximately 246kgs feed @ 10% solids with 26kgs Powder @ 5% residual moisture + 220kg/h water evaporated based on Potato Proteins. Inlet temperature 190 deg.c. with exhaust temperature 90 deg.c. Mass flowrate of drying air rated 6,895kg/hr. System includes the following parts: (1) Airco model CHP inlet fan driven by 11kw motor. (1) Lanemark model DB07 propane burner with control panel. (1) Tall form spray dryer chamber with conical base fitted with dislodging hammers fitted to cylinder and cone. Access/inspection doors. Explosion suppression bottles. Nsdpfx Ajz D Efnof Sjdb (1) Stainless steel feed lance with pressure nozzle. (1) 304 Stainless steel product cyclone with explosion suppression bottles. Includes DMN Westinghouse type AL250DairyMZC-11 APS rotary lock value with motor. (1) Exhaust air chamber with explosion suppression bottle. (1) Gough type GBS550 stainless steel vibratory sifter/screen, mounted on stainless steel mobile frame. (1) Feed balance stainless steel vertical vessel. (1) FBF Italia model FBF2004/P High pressure plunger pump. (1) Mettler Toledo type V4-REM industrial flow-though metal detector with Piab conveying system. (1) Airco type CHP825 exhaust fan driven by 30kw motor. (1) Robbe model Atlas filling machine for bags with controls. Various small scale circulation pumps, pipework, instrumentation and ducting available. Specifications: Material Of Construction: 304 Stainless Steel Type Of Spray: Nozzle

Condition: ready for operation (used), Year of construction: 2023, operating hours: 2,408 h, spindle speed (max.): 4,500 rpm, travel distance X-axis: 239 mm, travel distance Y-axis: 102 mm, travel distance Z-axis: 584 mm, spindle motor power: 22,400 W, overall weight: 5,534 kg, number of axes: 4, This 4-axis HAAS DS30Y horizontal turning machine was manufactured in 2023. It features a maximum part swing of 533 mm and a maximum cutting diameter of 349 mm. The machine is equipped with a robust turret that accommodates 12 tools, ensuring versatility in operations. If you are looking to get high-quality turning capabilities, consider the HAAS DS30Y machine we have for sale. Contact us for further details. • Capacities: • Chuck size (main): 10.0 in / 254 mm • Max part swing: 21.0 in / 533 mm • Max cutting diameter (with BMT65 turret): 13.75 in / 349 mm • Max cutting length (varies with workholding): 32.5 in / 826 mm • Bar capacity: 3.00 in / 76 mm • Between centers: 32.5 in / 826 mm • Feedrates (rapids): • X: 472 ipm / 12.0 m/min • Y: 472 ipm / 12.0 m/min • Z: 945 ipm / 24.0 m/min • Axis motors (max thrust): • X: 4100 lbf / 18238 N • Y: 2300 lbf / 10231 N • Z: 5100 lbf / 22686 N • Main spindle: • Spindle nose: A2-6 • Drive system: Direct speed, belt drive • Max torque: 275 ft-lbf @ 500 rpm / 373 Nm @ 500 rpm • Draw tube bore: 3.0 in / 76 mm • Spindle bore: 3.50 in / 88.9 mm • Main spindle C axis: • Max speed: 60 rpm • Max rating: 5.0 hp / 3.7 kW • Positioning (±): 0.01° • Brake diameter: 13.9 in / 353 mm • Brake holding torque: 250 ft-lbf / 339 Nm • Control type: Interpolated motion and positioning • Secondary spindle: • Chuck size: 8.3 in / 210 mm • Spindle nose: A2-5 • Drive system: Direct speed, belt drive • Max rating: 15.0 hp / 11.2 kW • Max speed: 4000 rpm • Max torque: 100 ft-lbf @ 870 rpm / 135.6 Nm @ 870 rpm • Spindle bore ø (non-through): 0.81 in / 20.7 mm • Secondary spindle C axis: • Max rating: 5.0 hp / 3.7 kW • Max speed: 60 rpm • Positioning (±): 0.01° • Brake diameter: 8.5 in / 216 mm • Brake holding torque: 140 ft-lbf / 190 Nm • Control type: Interpolated motion and positioning • Secondary spindle positioning (M119): • Positioning (±): 0.02° • Brake diameter: 8.5 in / 216 mm • Control type: Positioning only • Turret: • Number of tools: 12 stations • OD vs ID tools: Any combination (will vary with turret) • Boring bar rear clearance (from back of turret): 4.00 in / 102.0 mm • Live tooling: • Max speed: 4000 rpm • Drive ratio: 1:1 • Tooling: BMT65 • General: • Coolant capacity: 55 gal / 208 L Nodpfx Aezh Eh Tsf Sedb • Air requirements: • Air required: 4 scfm @ 100 psi / 113 L/min @ 6.9 bar • Inline air hose: 3/8 in • Coupler (air): 3/8 in • Minimum air pressure: 80 psi / 5.5 bar • Electrical specification: • Spindle speed: 4500 rpm • Drive system: Direct speed, belt drive • Spindle power: 30.0 hp / 22.4 kW • Input AC voltage (3-phase) – low: 220 VAC; full load amps: 70 A • Input AC voltage (3-phase) – high: 440 VAC; full load amps: 35 A • Dimensions – shipping: • Domestic pallet: 171 in x 90 in x 98 in / 434 cm x 229 cm x 249 cm • Export pallet: 171 in x 90 in x 98 in / 434 cm x 229 cm x 249 cm Technical Specification Counter Spindle Yes Driven Tools Yes

Condition: used, Year of construction: 1992, Used overhauled Compressor Siad Low and High-pressure System for 1850 CBM: Used Compressor SIAD Impianti Booster compressor completely overhauled in 2022, like new and ready for delivery. Machine has 1850 m3/h of power. Complete replacement of the Baty and replacement of bands, bearings, gaskets, valves. ATLAS Copco ZR4 screw overhaul with replacement of air filter, oil filter and vapor filter, ACS Z oil, shuttle KIT, intake KIT, exhaust silencer filter, flexible coupling replacement, greasing of engine bearings and general compressor control. The Booster equipment has been overhauled to be immediately reused by any purchaser who has an immediate need. The machinery is guaranteed a 12-month or 2000-hour warranty on all replaced components. Only HP / LP tank and dryer need to be added. The two machines, Booster equipment and LP compressor Atlas, were purchased by the same company where they increased its compression power. Rental and short-term rental hypotheses of this Booster equipment can also be considered, with all transport and installation costs borne by the customer. The machines are now available immediately in one of our warehouses, and can be inspected, but it is not possible to start them for obvious reasons of power requirements at start-up. We have a team of technicians specialized in high and low-pressure compressors who can overhaul any unit of the major international brands such as SIAD, A&F, ATLAS COPCO, ABC and many others. Our team is at your disposal to evaluate any overhaul option of your old compressors, and in case of interest one of our employees can contact you to receive all the information necessary to make a first estimate online and possibly schedule a visit to you. It is possible, depending on our stock availability, to arrange a short-term rental during the overhaul time of your old compressor. Maintenance Performed Big end bearing half (1 bearing per connecting rod) Shoulder rings in 2/2 Half (connecting rod) Crank shaft grinding Baty Oil Filter (Succhiarola) Shirt (n 3) Piston rings + oil scraper bands (crosshead) Oil pump filter cartridges Roller bearings Full soft seal (Of phalanx and labyrinth seal) Baty hatch gasket Visual oil warning light Lantern door seals Flywheel Belts Ndedsvgurcspfx Af Seb 1,2,3 phase cylinders: Piston rod (1,2,3 phase) Sealing rings and relative sealing pack plugs Piston rings + shoes (1,2,3 phase) Complete valve overhaul Head gasket (1,2,3 phase) Valve seat gaskets (1,2,3 phase) Various spare parts: Air filter Various O-rings Security valves Solenoid valve Various bolts

Condition: used, Year of construction: 2020, Used extraction system, also suitable for high-alloy metals The system comes from a reputable industrial company and is being sold due to a relocation. Additional accessories, such as extraction arms, etc., are not included; it was connected to a robotic welding cell. The price is for self-dismantling; dismantling can also be offered for an additional charge. Manufacturer: KEMPER Model series: WeldFil Compact Type: 3440502 / 34 40 502 Year of manufacture: 01/2020 Design: Outdoor Control: Siemens Sinumerik, touchscreen FILTER SYSTEM Filter stages: 1 Dust class: M W3 approval according to EN ISO 15012-1 W3 separation rate: ≥ 99% Suitable for welding fumes from high-alloy metals PERFORMANCE DATA Extraction capacity: 2,750–3,960 m³/h Negative pressure: 2,050–2,700 Pa Motor power: 4 kW CONTROL / EQUIPMENT Demand-controlled extraction capacity Automatic, continuous regulation of fan output Constant extraction capacity at the workstations Ndodpez Apkzofx Af Seb Siemens Simatic system control External terminal with touchscreen display PIPING / ACCESSORIES SparkTRAP pre-separator NW 355 For almost complete separation of sparks and glowing particles before the filter system With dust collection container Equipment for optional intake/exhaust operation: 2-way distributor Ø 355 mm KEMPER dosing unit for extraction and filter systems System 8000/9000 Automatic dosing of the filter aid depending on operating hours or cleaning cycles via SparkTRAP for protection against sparks and filter fires

Condition: used, Drive . kW Capacity . kg/h material . 6 pieces The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity Ndodpfozdu Twox Af Seb More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: good (used), Year of construction: 2006, operating hours: 37,000 h, functionality: fully functional, number of slots in tool magazine: 60, Equipment: documentation/manual, 5-axis machining center MAZAK VARIAXIS I 500 with pallet changer Year: 2006 Numerical control: Mazatrol Matrix Controlled axes: 5 continuous axes X-axis travel: 510 mm Y-axis travel: 510 mm Z-axis travel: 460 mm A-axis: -120° / +30° C-axis: 360° Table size: 500 x 400 mm x 2 Maximum load on the table: 300 kg Njdpfx Afozz R Ace Sjdb Distance from spindle nose to horizontal table: 190 - 650 mm Distance from spindle nose to vertical table: 140 - 600 mm Maximum spindle speed: 12,000 rpm Spindle power: 22 kW Tool magazine capacity (automatic tool changer): 60 Chip conveyor

Condition: ready for operation (used), Year of construction: 2014, operating hours: 1,174 h, product length (max.): 4,770 mm, This HOMAG KDF 230 edgebander was manufactured in 2014. It has processed a total of 65,428 workpieces and 108,908.92 meters of edge length. The machine features a digital touchscreen control panel and a multi-flexible overhead dust extraction system. If you are looking to get high-quality edgebanding capabilities, consider the HOMAG KDF 230 machine we have for sale. Contact us for further details. - Total Operating Hours: 1174:30.12 h- Total Workpieces Processed: 65,428 Stck- Total Edge Length Processed: 108,908.92 m- Application Unit Temperature: 190 °C (Target), 76 °C (Actual)- Feed Speed: 11 m/min- Working Height: 950 mm- Pneumatic Connection: min. 6 bar- Overall Machine Length: 4,770 mm- Workpiece Width min.: 70 mm (at 8-22 mm thickness), 120 mm (at 23-40 mm thickness), 150 mm (at 41-60 mm thickness)- Workpiece Overhang: 38 mm- Workpiece Thickness: 8 - 60 mm- Edge Material Roll: 0.4 - 3 mm (max. cross section 135 mm² for PVC, 100 mm² for veneer, roll diameter max. 830 mm)- Edge Material Strip: 0.4 - 6 mm (max. cross section 165 mm²)- Control System: EasyTouch 2- Operating Voltage: 400 V / 3Ph / 50Hz- Joint Trimming Unit: 2 x 2.2 kW, 200 Hz with DIA cutter set (100 x 65 x 30 mm, Z=3, max. workpiece thickness 60 mm)- Gluing Unit: Standard A6 with workpiece pre-heater and quick-change application unit (suitable for Granulate / PU)- End Trimming Unit: 2 x 0.18 kW, 200 Hz, 12,000 rpm (swivel range 0-15 degrees) with pneumatic adjustment- Fine Trimming Unit: 2 x 0.27 kW, 200 Hz, 12,000 rpm with pneumatic adjustment (chamfer/radius/straight), DFC combination cutters, and multi-roller sensing - Corner Rounding / Form Trimming Unit: 1 x 0.35 kW, 200 Hz, 12,000 rpm (max. edge thickness 3 mm, max. workpiece thickness 60 mm, min. workpiece length 250 mm) with structural floor attachment- Profile Scraper Unit: Quick-change heads, pneumatic adjustment, and special multi-roller sensing- Glue Joint Scraper Unit: Included with top/bottom tracing and dust extraction- Buffing Unit: 2 motors x 0.09 kW, tilt and height adjustable- Pressure Line: Smooth PU top pressure rollers- Additional Features: Hood internal lighting, feed fence extension (+300 mm), automatic edge infeed (KDX 1210/1400) Technical Specification Feed Speed 11 m/min Njdpszzwhfjfx Af Sodb

Condition: used, Year of construction: 2015, functionality: fully functional, working width: 1,300 mm, total height: 1,780 mm, total length: 9,000 mm, total width: 1,783 mm, LOW USAGE!!! Technological line – equipment characteristics The technological line consists of a set of devices designed for transporting, cleaning, drying, and curing components, including furniture fronts and panels. The TB 2000 and TB 1500 belt conveyors are equipped with belts resistant to abrasion, friction, and solvents. The drive is powered by a geared motor controlled by a frequency inverter, providing a feed rate of 2.2 to 20 m/min. The devices have independent control panels with PLCs. The SMARTCLEAN 33-F brush machine is used to clean components before the painting process. It has a steel, reinforced body, adjustable height of the working units, and a system of brushes, blowers, and deionizing bars. The working width is 1300 mm, and the range of thickness of the processed components is 3–80 mm. The feed rate is 4–20 m/min, and the brush speed is 250–1100 rpm. The machine is equipped with a PLC, a touch panel, and safety systems. The UV-R SP M2 oven is designed for curing UV-cured products and for operation in a line with a working width of 1300 mm. It is equipped with two UV lamps, a cooling system, and an integrated conveyor with a length of 2000 mm. The total length of the oven is 12,000 mm, and the maximum component thickness is 80 mm. Control is via PLC and a touch LCD monitor, with the ability to save programs. The system enables precise adjustment of the radiation power and automatic control of the lamps and cooling. The TT 11000 chain conveyor has steel guides and chrome-plated beams. The length of the device is 11,000 mm, the operating speed is 2.1–20 m/min, and the drive power is 0.75 kW. Control is via a frequency inverter. The TR 1500 roller conveyor is equipped with driven PVC rollers with a diameter of 66 mm and a pitch of 125 mm. Its length is 1500 mm, and the feed rate is 2.2–20 m/min. The device has a PLC panel, a protective cover, and a photocell at the output. The ECOGEL 64/5 oven is designed for rapid drying of components using laminar flow of hot air. The flow is in the opposite direction to the direction of panel transport. The oven is equipped with a G4 filtration system, a heat exchanger with automatic temperature control, and supply and exhaust fans. The total length is 9000 mm, the working width is 1300 mm, and the maximum component thickness is 80 mm. The installed power is 3.7 kW, and the thermal power is 76,400 kcal/h. Control is via PLC and an LCD monitor. The AQUADRY LA/8 oven is designed for rapid drying of water-based stains and lacquers. It uses high-speed air knives to ensure efficient heat exchange. The process can be further accelerated using infrared lamps. Air recirculation helps to reduce energy consumption. Ndodpoz Ahr Rsfx Af Sob The entire line has integrated control systems, safety features, and solutions that enable the automation of transport, cleaning, drying, and curing processes.

Condition: like new (used), Year of construction: 2013, Weiler Praktikant VCD Precision Lathe (2013) Manufacturer: Weiler Type: Praktikant VCD Precision Lathe Year of Manufacture: 2013 Condition: used, very good, like new, no signs of wear, including new maintenance and inspection report prior to sale. Distance between centers: 650 mm Swing over bed: 160 mm Swing over cross slide: 320 mm Swing over compound slide: 190 mm Cross slide travel: 150 mm Compound slide travel: 110 mm Compound slide swivel range: +/-65° Bed carriage travel: 350 mm Bed width: 205 mm Tool holder cross-section (height x width): 20 x 20 mm Height from top slide to center line: 30 mm Spindle head according to ISO DIN 702-3 (DIN55027) size 5 Spindle diameter in the front bearing: 70 mm Spindle bore: 43 mm Internal taper of the main spindle: Metric 50 Drive power: 6 kW Spindle speed range: 30 - 4000 rpm Number of gear stages: 1 Number of spindle speeds: infinitely variable Number of feeds: 24 Longitudinal: 0.02 - 0.63 mm/rev Cross: 0.006 - 0.2 mm/rev Tailstock diameter: 40 mm Tailstock travel: 85 mm Internal taper of the tailstock: 3 MK Weight, without packaging and accessories: approx. 1150 kg Njdpfx Aozza Nref Ssdb Length / Width / Height, net: 1720x890x1700 mm Headstock / Back wall / Sliding guard: Light grey RAL 7035 Machine base / Machine bed: Basalt grey RAL 7012 Housing of the display screen: Blue NCSS 4550-R80B.

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, Manufacturer: SW – Schwäbische Werkzeugmaschinen GmbH Model: BAW06-22 Year of manufacture: 2018 Machine No.: 2080519 Control: Siemens SINUMERIK Machine type: CNC horizontal twin-spindle machining center Country of origin: Germany Technical Data Working travels: X-axis: 600 mm Y-axis: 600 mm Z-axis: approx. 400–500 mm* Number of machining spindles: 2 Spindle arrangement: horizontal, twin spindle Spindle distance: 600 mm Maximum spindle speed: 17,500 rpm Tool holder: HSK-A63 Spindle power: up to 2 x 35 kW* Spindle torque: up to 2 x 80 Nm* Rapid traverse X/Y/Z: up to 100 m/min* Automatic tool changer: Yes Nodpfxozypmqo Af Sodb Tool magazine: up to 84 positions / 2 x 42 tools* NC rotary/swivel workholding system Automatic workpiece changing/loading system Automation / Equipment Industrial robot for automatic loading and unloading Complete safety enclosure Automatic workpiece handling system NC-controlled rotary/swivel workholding Twin-spindle simultaneous machining Automatic tool changer KNOLL coolant filtration system High-pressure coolant system Chip evacuation system Central coolant supply Siemens operator panel CE marking Electrical Data Operating voltage: 3/PE / 400 V / 50 Hz Full-load current: 190 A Pre-fuse: 200 A Pneumatic pressure: 7.0 bar Air consumption: 1.0 Nm³/min Electrical diagram No.: 205-000-20678-97 Weight Machine weight: approx. 16,000 kg Nameplate specification: 160 kN Description SW BAW06-22 CNC horizontal twin-spindle machining center, manufactured in 2018. The machine is designed for highly productive simultaneous machining with two horizontal machining spindles. Equipped with Siemens SINUMERIK CNC control, HSK-A63 spindle interface, high-speed spindles up to 17,500 rpm, automatic tool changing system and NC-controlled rotary/swivel workholding. The machine is integrated into an automated production cell with industrial robot for automatic workpiece loading and unloading. The machine is additionally equipped with a KNOLL coolant filtration system, high-pressure coolant supply, chip management system and complete safety guarding. Made in Germany.

Condition: used, Year of construction: 2017, A Maguire vacuum dryer for plastic granulate is offered. Throughput: approx. 65kg/h, heating power: 11kW, max. operating temperature: 190°C, heating hopper volume: 70l, vacuum chamber volume: 28l, retention hopper volume: 45l, voltage: 400V/3Ph, frequency: 50Hz, current consumption: 9.7A. An on-site inspection is possible. Nedpfoz Akvxox Af Ssdb

Condition: used, Year of construction: 2015, Lippert belt conveyor GF 21900-750-600 RA2271 Technical data: Conveyor length (NL): 21900 mm frame width (NB): 750 mm belt width (GuB): 600 mm Overall height (BH): 120 mm, 430 mm with motor Supporting feet: optionally available Conveying speed (v m/s): Contact us and we will try to meet your preferred conveying speed. Drive: SEW gear motor, R37 DRE80M4/TH Electrical data: 50Hz V380-500, kW 0,75 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Nedortu Dhopfx Af Sodb Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: used, Year of construction: 1983, functionality: unexamined, total height: 1,900 mm, total width: 2,500 mm, total length: 3,000 mm, table width: 560 mm, table length: 1,400 mm, position of the milling head: Schwenkkopf, space requirement width: 2,500 mm, space requirement length: 3,000 mm, space requirement height: 1,900 mm, We are offering this used Deckel FP4NC milling machine, year of manufacture 1983. Table dimensions: 1,400/560 mm, swiveling head, SK 40 tool holder, Dialog 4 path control, installation dimensions: 300/250/190 cm. Heavy-duty robust design with slant bed. Nodpfx Afsx Sygnj Sodb 8 SK40 tool holders and a machine vice are also available upon request. Location: 89312 Günzburg If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: used, Year of construction: 2018, Belt conveyor slider 1900-300-1050 Make: Transnorm like new, showroom machine Year 2018 Length:1900 mm Belt width: 300 mm Stand dimensions: 790x480 mm Current conveyor belt height: 1050 mm Adjustable foot height: 100 mm Maximum ejection width: 890 mm Belt conveyor speed: 0,03-1,487m/s Nsdpek Abgysfx Af Sedb Electrical data Completely wired with sensors, direct wiring in the control box Belt conveyor motor data: V300-500, kw 0,75/S1 with frequency converter Ejection motor data: V300-500, kw 0,11-1,1/S1 with frequency converter and Brake Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics