Used Briquetting Machine for sale (65,303)

Condition: used, Year of construction: 2007, Technical details: x-travel: 1000 mm y-travel: 1000 mm z-travel: 500 mm B-axis (table): 360 ° spindle taper: HSK A63 working spindle range of revolution per minute : 15000 U/min rotary table: 260 mm control: Andronic 2060PKM feed: 1 - 5000 mm/min rapid traverse X,Y: 15 m/min. rapid traverse Z-axis: 12 m/min Nedpfxju Idm Ne Af Sjwl total power requirement: ca. 42 kW weight of the machine ca.: 6,0 t dimensions electric cabinet LxWxH: 2,4x0,6x2,2 m dimension machine xH: 3,5x2,4x3,2 m 5-axis BAZ in parallel kinematics suitable for prototypes. i.D. *

Condition: used, Year of construction: 1993, Technical details: x-travel: 400 mm y-travel: 300 mm z-travel: 400 mm spindle revolutions per minute : 8000 U/min control: Fanuc OM clamping table: 500x300 mm magazine slots: 16 Stück tool taper: SK40 distance work spindle /surface of the table max.: 50-450 mm numbers of pallets: 2 Stück/part total power requirement: 10 kW weight of the machine ca.: 2,5 t dimension machine xH: 2,4x1,8x2,5 m Nodou Idn Hspfx Af Sewl transport measurements machine: 2,45x1,8x2,5 m - E-cabinet - cooling device - chip conveyor manufacturer META (conveying height 1500mm; width 200mm) *

Condition: used, Year of construction: 1960, Technical details: current capacity: 60 kVA throat: 680 mm arm distance: 115 / 415 mm pincer opening adjustable: 180 mm rated capacity: 60 kVA welding power: 71 kVA electrode capacity: 100 bis 600 daN voltage: 380 V / 50 Hz V air pressure: min./max.: 6 / 10 bar cooling water consumption: 12 l/min weight of the machine approx.: 685 + 200 kg connection voltage: 380 V / 91 A V rated capacity: 60 kVA connected load: 54 kVA dimension L-W-H: ca. Maschine: 1.700 x 850 x 1.750 mm dimension L-W-H: ca. Aggregat: 900 x 650 x 1000 mm POINT WELDING MACHINE - WELDING TRANSFORMER Direct current three-phase welding machine Application: Spot, projection and series spot welding Maximum short-circuit power 89 kVA Primary short-circuit current 135 A Secondary current = short-circuit current: 25 kA and welding current max. 20 kA Electrode stroke max. 90 mm; electrode force min./max.: 100 daN / 600 daN Stroke sequence max. with 10 mm stroke 400 strokes/min. Spot fitting: electrode holder Ø 30 mm, adjustable 180 mm, arm distance = min./max.: 115 / 415 mm 2-fold foot switch Nwodpfx Afju Nv Eme Ssl Cooling unit, mobile = movable on wheels, connection power 1.45 kW, pipe connection R 3/4 inch, coolant R22 *

Condition: used, Year of construction: 1986, Technical details: x-travel: 1120 mm y-travel: 345 mm z-travel: 400 mm spindle taper ISO: SK50 spindle head swivable left - right: 90° ° Distance rear edge of table to column guideway: min./max.: 125 / 470 mm max. torque on the spindle: 280 kpm range of revolution per miute: 28 - 1400 / 18step U/min feed:: X/Y: 16 - 800 und Z: 5 - 250 mm/min Table dimensions: 1600 x 460 mm table surface area: 1400 x 330 mm table load: 1,5 t Nwjdpfxju Iy Hlj Af Sol total power requirement: 14,5 kW machine weight approx.: 3900 kg dimension machine xH: 2,7 x 2,0 x 2,1 m dimensions electric cabinet: 0,47 x 0,8 x 1,5 m Equipment: 3-axis measuring device EISTA VISULESTA II E Accessories: Machine vice 155mm 2x counterholder and shaft 4x machine feet 2x cranks (for machine table and for vice) *

Condition: used, Technical details: x-travel: 450 mm y-travel: 150 mm z-travel: 400 mm distance between column - table edge: min./max.: 100 / 250 mm turning speed range: 25, 44, 78, 130, 228, 400 / 6 step U/min feed:: X/Y: 10 - 100 / 8 step mm/min Table dimensions: 990 x 300 mm table surface area: 800 x 195 mm table swivelabel +/-: 30° ° total power requirement: nicht bekannt kW weight approx.: 1200 kg Nedsu Nc Nljpfx Af Sowl dimension machine xH: 1,5 x 1,3 x 1,5 m Horizontal milling machine, currently a tool clamped milling arbor Ø 32mm with hobbing cutter. Machine vice included. *

Condition: used, Year of construction: 1984, Technical details: Njdpfx Afeu Nc Nxs Sjwl x-travel: 400 mm y-travel: 100 mm z-travel: 100 mm electrics - voltage/frequency: 380/50 V/Hz total power requirement: 0,8 kW machine weight approx.: 132 kg space requirements of the machine approx.: 1,6 x 0,6 x 1,4 m This milling machine is ideally suited for window. - long hole milling machine for aluminium - pneumatic tool clamping - feeder: hand lever operation - safety device: 2,2 V *

Condition: used, Technical details: x-travel: 1000 mm y-travel: 350 mm z-travel: 400 mm distance between column - table edge: min.150 / max. 550 mm turning speed range: 28 - 1400 / 18 step U/min tool taper: SK40 spindle head swivable left - right: 90° und vor/zurück: 45° ° feed:: X/Y-Achse: 16 - 800 / 18 step mm/min Table dimensions: 1600 x 400 mm table surface area: 1400 x 330 mm total power requirement: 14,5 kW Nodpfxov Sz Dio Af Sjwl weight approx.: 4000 kg dimension machine xH: ca. 2,0 x 2,4 x 1,85 m

Condition: used, Technical details: z-travel: 1250 mm swing diameter over bed: 260 mm workpiece dia. over bed: 500 mm workpiece dia. over support: 250 mm Nwodpfxsv U Un Hj Af Sol center height over bed: 260 mm hobbing length: 2000 mm module max. : 8 / 12 total power requirement: 9,5 kW weight of the machine ca.: 3,8 t

Condition: excellent (used), Year of construction: 1992, grinding length 1000 mm grinding width 250 mm magnetic plate size 1050 x 250 mm table speeds 0–35 m/min m/min Tilting magnet Nodpfxez D Ivcs Af Sswl

Condition: like new (used), functionality: fully functional, Year of construction: 2021, The R-CNC150 roller bending machine will be a fantastic addition to any workshop where tube and profile bending can reach up to 168 mm in section. This machine is equipped with the latest and most advanced CNC technologies. The industrial-grade touchscreen control makes this machine not only flexible but also easy to use and durable. SPECIFICATIONS: Nsdpsz D I Swefx Af Sswl Imperial Metric Roller adjustment Hydraulic Pressure roller Single Upper roller diameter 15.35" 390 mm Lower roller diameter 15.35" 390 mm Driven rollers 3 shafts Shaft diameter 1.77" 100 or 120 mm Lower shaft spacing adjustable Required power 400V, three-phase, 50Hz Motor 14.75 HP 11 kW Packaging dimensions (L/W/H) 75" x 55" x 75" 1905 x 1400 x 1905 mm Weight 6,063 lbs 2755 kg

Condition: excellent (used), Briquetting machine POR Oscar 9kW Nwjdpfx Aexdahysf Ssl Average briquette output: 130-180 kg Briquette diameter: 70 mm Motor power: 9 kW Feeding hopper diameter: 1170 mm Technical documentation CE mark Machine weight approx. 800 kg

Condition: new, Year of construction: 2026, Actually one showroom machine available. Very robust machine with high pressing force - is also suitable for producing a salable briquette quality * depending on the material. The large press cylinder and the 80 mm briquette make this possible. Our best-selling briquetting press series + Tried and tested, simple technology, for extremely low susceptibility to errors + 25 years of experience, further development and know-how + Several thousand machines in use with satisfied customers + Top price-performance ratio Surcharge for cooling unit + € 4.995 net, (can also be retrofitted later) Nedpfxjxfwde Af Sewl * cools the pressing tongs (important from 3.5 hours) and the hydraulic oil * Cooling device recommended for regular use of more than 3.5 hours at a time. Briquette diameter: 80 mm Front bush: 125 mm Briquette stroke max .: 100 mm Briquette lift opt ​​.: 80 mm Output (depending on material): up to 200 kg / h * * depending on the bulk weight * based on a bulk weight of 200 kg per cubic meter Motor power: 9.2 kW 400 volts / 50 Hz / 3 phases Length: 2095 mm Width: 1300 mm Height: 1700 mm Weight: 1250 kg Oil volume: 220 liters Silo diameter: 1200 mm Silo content: approx. 1 qbm Pump: 75 liters Hydraulic pre-compressor Cooling pressing tongs option: yes, with special accessory coolable pressing tongs Hydraulic oil cooling option: yes Cooling of the pressing tongs and the hydraulic oil with cooling device (special accessory) Level monitoring option: yes Strand briquette option; yes (depending on material) Option of enlarged filling slide: yes, with special accessory enlarged filling slide CE compliant . Requirements for the raw material: - The moisture content (atro) must be between a minimum of 6 and a maximum of 18% - Chip length maximum 20 mm - Installation temperature: temperature-controlled room at at least + 5 ° C - The loading must be free of metals and mineral impurities such as sand, stones, etc. This can result in damage to the pressing tools and / or increased wear

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, 5-Axis Machining Center Biesse C9.50 - Beam table – Material can be clamped with suction cups or hold-down clamps Dual tool magazine configuration – highly flexible for production Top magazine – Revolver type Bottom magazine – Chain carousel (additional saw blade for HSK mounting – spindle) 8 beam tables, supports 16 kW spindle Very large aggregate/saw unit Njdpeyl Uuxsfx Af Sjwl Becker pump Year of manufacture: 2009

Condition: good (used), Oxy-fuel cutting device, Nwodpfx Asd Dti Isf Sel with rotary table ideal for cutting weld seams Rotary table diameter 285 mm Maximum cutting diameter 600 mm Overall height 1150 mm Width 900 mm Depth 500 mm

Condition: as good as new (ex-display), Year of construction: 2025, Machine is in the exhibition. Optimill F 110 HSC Premium CNC milling machine direct from the manufacturer. F 110 HSC - The OPTIMUM Premium CNC milling machine with Siemens SINUMERIK 828D control is characterized by performance, speed, precision and a long service life. - Heavy-duty design - High productivity - High reliability - Heavily ribbed, torsion-free machine base - Profiled rail with recirculating ball bearing for high rapid traverse speeds in all axes - High-torque servo drives in all three axes - Telescopic guideway cover on all three axes - Automatic lubrication - Massive, exact milling table with three T-slots, large dimensions and precision-ground - The portable, electronic handwheel with enabling switch and emergency stop switch makes it much easier to the run-in of programs considerably - Coolant device with chip flushing system and cleaning gun - Chip conveyor in belt design ensures efficient chip removal - Chip trolley - RJ45 plug connection and 230 V power connection - Closed switch cabinet with integrated heat exchanger ensures optimum temperature and prevents the ingress of dirt particles - Machine light in the work area - Additional package SIEMENS material liability for defects and free online/on-site service OSS Plus - 1-year Basic maintenance contract included in D/A/CH Milling spindle Inline spindle Machine data Electrical connection 400 V / ~50 Hz Total connected load 15 kVA Milling spindle Drive motor S1 operation 9 kW Torque drive motor S1 operation 57 Nm Drive motor S6-30% operation 21.2 kw Torque drive motor S6-30% operation 135 Nm Spindle holder SK 40 / DIN 69871 Internal spindle cooling option Drive motor S1 operation 10.5 kW Torque drive motor S1 operation 50 Nm Drive motor S6-30% operation 26.4 kW Torque drive motor S6-30% operation 125 Nm Cooling lubricant system Power of the coolant pumps, 2 pieces 900 W Delivery rate max. 35 l/min. Tank capacity 116 liters Cleaning pump Power of the cleaning pump 530 W Milling accuracy Repeat accuracy ± 0.005 mm Positioning accuracy ± 0.005 mm Tool changer Double arm gripper type Number of tool positions 20 Tool diameter max. 78 mm Tool diameter (secondary positions free) max. 120 mm Tool length 300 mm Tool weight max. 8 kg Time tool change: tool to tool 2.5 seconds Travel distance X-axis 650 mm Y-axis 400 mm Nwsdpfxsymka Ho Af Ssl Z-axis 500 mm Feed drive Rapid traverse X-, Y-, Z-axis 48 / 48 / 32 m/min. Motor torque X- / Y- / Z-axis 11 Nm / 11 Nm / 20 Nm Feed forces X- / Y- / Z-axis 3.67 kN / 3.67 kN / 6.68 kN Speed range Speeds* 12,000 min-1 Pneumatics Air pressure 6 bar Air consumption per hour 6 - 8 kg/m³ Milling table Distance spindle - table 100 - 600 mm Table length x width 850 x 400 mm T-slot size / number / distance 18 mm / 3 / 100 mm Max. load 400 kg Dimensions Length x width x height 2,100 x 2,300 x 2,750 mm Total weight 4,300 kg

Condition: used, functionality: fully functional, Weinig Rondamat 925 grinding machine + Weinig CAM 970 1. Rondamat 925 Grinding wheel diameter: 150-225mm Nedpfx Afez D Sx Uj Sowl Grinding wheel width: - ceramic: 5 mm - boron carbide: 10 mm Grinding wheel bore: 60mm Tool diameter: 100-230mm Tool width: up to 240mm 2. C.A.M 970 Tool measuring system

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, Machine in granite configuration with 16 SG-8 spindles Maximum working width: 2,200 mm Automatic centralized lubrication system Optical slab shape detection system with 1 × 1 cm resolution Cleaning spindle Working direction: from right to left Nedez D Tamopfx Af Sjwl On request, the machine can be supplied as a complete line, including loading system, roller conveyors, dryers, waxing machine, film applicator and unloading system.

Condition: excellent (used), functionality: fully functional, Locatelli MK-CC 1200 Turning Center Turning length: 1200mm Automatic loading of stock material from a feeder 3 Duplomatic floating tool holders, guided by a template 3 upper tool holders with axial movement Nwsdpfx Aoyxwpysf Sol Option for face drilling in the material Machine control system modernized in 2023 Excellent condition

Condition: used, Year of construction: 2005, Technical details: swing diameter: 320 mm control: 840 D SIEMENS turning speeds: 5000 1/min spindle drive: 20 / 27 kW Nsdpfx Aemcibwef Sswl chucking diameter: 250 mm travel -x axis: 650 mm travel -z axis: 300 mm turret head: 12 Pos. tool holder: VDI 40 toolpiece turning speed range: 4000 1/min work piece power: max. 11,7 kW weight of the machine ca.: 8 t CNC vertical lathe, live tools, C-axis, high pressure pump 20 bar, 500l, filter, flush gun, 3-jaw chuc, EWAB loading station right, chipconveyor, approx. 23.500h "machine on", approx. 8.000h "spindle on" (in total) MACHINE WILL GET NEW (OVERHAULED) SPINDLE (0 hours) *

Condition: excellent (used), Make Illig Model RV 53d Year 2012 Condition Excellent Stock Number 00047 Approx Hours 16.700 Delivery Date November 2026 Stations Forming, Cutting and Robot Stacking Max Forming Area 500 x 365 mm Min Forming Area 300 x 160 mm Depth of Draw 100 / 40 mm Max Mould Closing Force 400 kN Nwsdpfsz Ecu Nsx Af Sol Forming Pressure 3 bar Max Cycles/Min 45 Total Width incl Control Cabinet 2600 mm Total Length incl Roll Stand 6750 mm Total Height 2590 mm Total Weight 6500 kg Notes All details are subject to change and/or errors. All equipment is subject to availability and/or prior sale.

Condition: good (used), Code: 0482 Brand: OMS SALVARANI Model: FC 350 R - CE Standard Crosscutting machine with base frame for wood, aluminium, PVC, plastic, etc. - CE Standard Technical data Blade diameter mm 350 Nodpfxjz Ebdio Af Sswl Three-phase motor Watt 2800 - Rpm 3000 Cutting capacity height mm 145 Cutting capacity width at 45 degrees mm 113 Cutting capacity width at 90 degrees mm 160 Base complete with suction Overall dimensions mm 800 x 600 x 1500 h Weight kg 110

Condition: excellent (used), functionality: fully functional, Automatic lathe Locatelli Ariete 3 Length of the cant max/min 1000/200mm Dimensions of the cant max/min 85×85/20x20mm Maximum length of the processed material 120mm with a hole 150mm without a hole Automatic material feeder CE certificate Nwedpfx Asx Thw Def Sel Complete DTR documentation Main engine with a power of 3/4kw Two spindle speeds 2500/3600rpm Oil pump engine 2.2kw Working pressure 6-8bar

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, Tool milling machine Kunzmann WF4/3 with Heidenhain TNC 320 control system, in very good condition, CE-compliant, from a training workshop! Technical data: >> Year of manufacture 2008, machine no. 347139 >> Fixed angular table >> Speed: continuously variable up to 4500 rpm >> Feed rate continuously variable in 3 axes from 0 to 2000 mm/min >> Rapid traverse X and Y axis 5000 mm/min >> Z axis 4000 mm/min >> Travel distances X/Y/Z: 400/350/400 mm >> Table surface: 650 x 350 mm >> Table load: 250 kg >> Quill stroke vertical: 60 mm >> Vertical quill and horizontal quill - SK40 >> Hydraulic clamping system >> Weight approx. 1800 kg >> Space requirement approx.: 2.3 x 2 x 2 m >> Drive power: 15 KVA Accessories and equipment: >> Heidenhain TNC 320 control system >> Hydraulic clamping, vertical and horizontal >> Automatic central lubrication Nwodpfx Asz Eh Tqjf Sol >> Spindle brake >> Technical documentation, spare parts diagrams, operating manual for the control system and programming examples >> Handwheels >> Coolant system (not shown in the pictures) About the machine: Offered is a Kunzmann WF4/3 tool milling machine with a Heidenhain TNC 320 control system. This universal milling machine is in very good condition and has only a few operating hours. It comes from a company where it was only used for training purposes. It has a very easy-to-use control system. Furthermore, the machine has hydraulic clamping in both vertical and horizontal positions. Changing from vertical to horizontal is very easy by folding down the vertical head. The guides are regularly lubricated by the central lubrication system. The Kunzmann has been mechanically and electrically inspected by us. Take advantage of the opportunity to inspect and test the Kunzmann on site while it is powered up. There are 5 identical Kunzmann WF4/3 milling machines available from a vocational school. The machines are available immediately.

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, Tool milling machine Kunzmann WF4/3 with Heidenhain TNC 320 control system, in very good condition, CE compliant, from a training workshop! Technical data: >> Year of manufacture 2008, Machine No. 347142 >> Fixed angular table >> Speed: continuously variable up to 4500 rpm >> Feed rate continuously variable in 3 axes from 0 to 2000 mm/min >> Rapid traverse X and Y axis 5000 mm/min >> Z axis 4000 mm/min >> Travel distances X/Y/Z: 400/350/400 mm >> Table surface: 650 x 350 mm >> Table load: 250 kg Nodjz Eh T Depfx Af Sjwl >> Vertical quill stroke: 60 mm >> Vertical quill and horizontal quill - SK40 >> Hydraulic clamping system >> Weight approx. 1800 kg >> Space requirement approx.: 2.3 x 2 x 2 m >> Drive power: 15 KVA Accessories and equipment: >> Heidenhain TNC 320 control system >> Hydraulic chuck, vertical and horizontal >> Automatic central lubrication >> Spindle brake >> Technical documentation, spare parts diagrams, operating manual for the control system and programming examples >> Handwheels >> Coolant system (not shown in the pictures) About the machine: Offered for sale is a Kunzmann WF4/3 tool milling machine with a Heidenhain TNC 320 control system. This universal milling machine is in very good condition and has only a few operating hours. It comes from a company where it was only used for training purposes. It has a very easy-to-use control system. Furthermore, the machine has hydraulic chucks for vertical and horizontal operation. Changing from vertical to horizontal operation is very easy by folding down the vertical head. The guideways are regularly lubricated by the central lubrication system. The Kunzmann has been mechanically and electrically inspected by us. Take advantage of the opportunity to inspect and test the Kunzmann on-site with power connected. There are 5 identical Kunzmann WF4/3 milling machines available from a vocational school. The machines are available immediately.

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, Tool milling machine Kunzmann WF4/3 with Heidenhain TNC 320 CNC control in very good condition, CE-compliant, from a training workshop! Technical data: >> Year of manufacture 2008, Machine No. 347140 >> Fixed angular table Nodpjz Eh Uzsfx Af Sowl >> Speed: continuously variable up to 4500 rpm >> Feed rate continuously variable in 3 axes from 0 to 2000 mm/min >> Rapid traverse X and Y axis 5000 mm/min >> Rapid traverse Z axis 4000 mm/min >> Travel distances X/Y/Z: 400/350/400 mm >> Table surface: 650 x 350 mm >> Table load: 250 kg >> Quill stroke vertical: 60 mm >> Vertical quill and horizontal quill - SK40 >> Hydraulic clamping system >> Weight approx. 1800 kg >> Space requirement approx.: 2.3 x 2 x 2 m >> Drive power: 15 KVA Accessories and equipment: >> Heidenhain TNC 320 CNC control >> Hydraulic chuck vertical and horizontal >> Automatic central lubrication >> Spindle brake >> Technical documentation, spare parts diagrams, operating manual for the control and programming examples >> Handwheels >> Coolant system (not shown in the pictures) About the machine: Offered is a tool milling machine Kunzmann WF4/3 with a Heidenhain TNC 320 CNC control. This universal milling machine is in very good condition and has only a few operating hours. It comes from a company where it was only used for training purposes. It has a very easy-to-use control. Furthermore, the machine has a hydraulic chuck in both vertical and horizontal positions. Changing from vertical to horizontal is very easy by folding down the vertical head. The guides are regularly lubricated by the central lubrication system. The Kunzmann has been mechanically and electrically inspected by us. Take the opportunity to inspect and test the Kunzmann on site while it is powered up. There are 5 identical Kunzmann WF4/3 milling machines available from a vocational school. The machines are available immediately.