Used Bosecker Portable Power Distribution Centre for sale (40,732)

Condition: like new (used), Year of construction: 2003, functionality: fully functional, overall weight: 80 kg, total height: 2,000 mm, total width: 600 mm, type of input current: three-phase, input voltage: 400 V, control cabinet height: 1,900 mm, input current: 100 A, 1x Siemens Sikus 630 Power Distribution Cabinet Sub-distribution Panel Switch Cabinet Power Distributor Floor Distributor Dimensions: 200x85x22.5 cm incl. plinth Cabinet height without plinth: 190 cm + 10 cm plinth = total height Industrial quality, enclosure made of sheet steel, color 7035 light grey Fully wired with main switch, surge protection, fuses, relays, and outgoing terminals. The distribution panels were in operation until recently and underwent annual inspection. Wiring diagram is included. 10 units available. Year of manufacture: 2003 For further data, please refer to the pictures. Very good condition – almost like new, see photos Collection by appointment only in 75053 Gondelsheim A forklift is available for loading Shipping by freight forwarder possible, please inquire with ZIP code Dksdpfx Adeynwx Seaok

Condition: like new (used), Year of construction: 2003, functionality: fully functional, overall weight: 80 kg, total height: 2,000 mm, total width: 600 mm, type of input current: three-phase, input voltage: 400 V, control cabinet height: 1,900 mm, input current: 100 A, 1x Siemens Sikus 630 Power Distribution Panel, Sub-Distribution Board, Control Cabinet, Distribution Box, Floor Distribution Cabinet Dimensions: 200x60x22.5 cm including distribution base Cabinet height without base: 190 cm + 10 cm base = total height Industrial quality, housing made from sheet steel, color RAL 7035 light grey Fully wired with main switch, surge protection, fuses, relays, and outgoing terminals. Djdpfxoynwxxs Adaokk The distributors were in use until recently and had annual inspections. A wiring diagram is included. A total of 10 units available. Year of manufacture: 2003 For further data, please refer to the images. Very good condition – almost like new, see pictures. Collection only by appointment in 75053 Gondelsheim. Forklift available for loading Shipping by freight carrier possible, please inquire with your postal code.

Condition: used, Hydraulic Power Unit ACME TYPE ZPR 6 Ref. No.: 962116 Year of manufacture: approx. 1972 Operating pressure: max 40 bar Flow rate: 10 litres/min. Tank capacity: 15 litres - In-line filter Motor power: 0.37 kW Djdpfx Aoxf Uz Dodajkk Power supply: 380 Volt, 50 Hz Installation dimensions (L x W x H): 500 x 270 x 500 mm Net weight: approx. 80 kg Test run with pressure test

Condition: new, Year of construction: 2026, functionality: fully functional, overall weight: 1,500 kg, total length: 3,200 mm, total width: 1,700 mm, total height: 2,400 mm, This system consists of an industrial electric oven with internal dimensions of 1700 × 3200 × 2100 mm, specifically designed for consistent and reliable thermal processing in demanding industrial applications. The oven is powered by a high-efficiency electric boiler unit (2200 × 2100 × 300 mm), which is equipped with three resistance blocks (totaling nine heating elements), providing a total installed capacity of 27 kW. This setup ensures even heat distribution and supplies sufficient thermal energy for stable and efficient operation during continuous use. To maximize internal air circulation and thermal efficiency, the system features two Ø350 mm impellers, each driven by a 1.5 kW (2 HP) electric motor. This configuration delivers optimized airflow dynamics, ensuring homogeneous temperature distribution throughout the oven chamber. The oven is fully insulated with 180 mm high-density thermal panels, which significantly reduce heat loss and provide optimum energy efficiency and complete sealing of the chamber. This design maintains stable operating conditions while minimizing energy consumption. Furthermore, the unit comes with an advanced control panel incorporating all essential functions and operational parameters. The user interface is engineered for ease of use and flexibility, enabling operators to conveniently adjust and monitor the system according to specific production needs. Key features that differentiate this system: • High power output (27 kW) • Optimized airflow system (dual motors + impellers) • Heavy-duty insulation (180 mm panels) Dodpoyzw Ihjfx Adaokk • User-friendly and fully functional control system • Designed for reliability, efficiency, and industrial-grade performance

Year of construction: 2026, condition: new, functionality: fully functional, This system pertains to an industrial oven with overall dimensions of 5000 × 2500 × 3200 mm, engineered to provide high-performance thermal processing with maximum efficiency and reliability. The unit features a gas-fired boiler system integrated with three high-performance electric motors, ensuring optimal power delivery and consistent operation under demanding conditions. These are coupled with three Ø452 mm impellers, specifically selected to achieve superior airflow characteristics and maximize mechanical efficiency throughout the chamber. The oven structure is fully enclosed with 180 mm thick high-resistance insulated panels, designed to minimize thermal losses, ensure energy efficiency, and provide complete chamber sealing. This construction guarantees stable internal temperature conditions and optimal process control. Additionally, the system includes an advanced control panel interface that supplies all essential operational data and adjustment functions. The interface is developed with a focus on user accessibility and ease of operation, enabling standard personnel to efficiently manage the system without compromising precision or performance. Djdpfx Asyzw E Hsdajkk

Condition: like new (used), For sale is a used Record Power band saw BS 300 E with a cutting width of 305 mm. The saw is in nearly new condition and has been reconditioned and inspected by our professional staff. (Fully functional) Technical data: - Cutting height: 190 mm - Cutting width: 305 mm - Saw blade length: 2370 mm - Blade width: 8-15 mm - Table tiltable 90-45° - Includes base with wheels The band saw is located in A-8561 Söding and can be inspected at any time during our business hours. Subject to prior sale! Related terms: band saw, saws, saw, band Djdpfx Adjyx Daljaekk Reference: R-AT0EF

Condition: used, Year of construction: 2025, fuel type: diesel, color: other, total length: 2,330 mm, total width: 2,120 mm, total height: 2,150 mm, Empty weight: 4.984 kg Fuel tank: 342 litres Peak current smoothing current generator Consisting of: - genset Engine: Yanmar Engine power: 38KVA Fuel: Diesel Environmental class: Tier4 final Dkodpfx Adjyzbk Hoajk Adblue: no Fuel tank capacity: 342L - Battery: Technology: AGM lead carbon Usable capacity: 50KWh - Inverter: AC in: 400V (16A/32A/63A) AC out: 160KVA Pure sine wave Dynamic load control (generator-current network-solar panels) - note: Only usable on 60Hz network - Notes: Unused Manufacturer warranty: 1 year Technical specifications: see pictures Operation: on-grid and off-grid Remote access Parallel setup up to 880KVA possible via plug-and-play coupling overall dimensions: 2330x2125x2155mm net weight: 4984Kg List price: €165,000 ex vat Online auction due to stock liquidation of P-Grid hybrid power solution combining generator with battery, for 'peak shaving' at construction and tower cranes and other applications in industry. Also, gasoline and diesel water-cooled emergency power generators with Honda and Kubota engines. The online auction opens Monday 30 March and closes Tuesday 28 April. Register your account via our website and place your bid. For viewings and inspections check the auction information on the website. Dome Auctions is an innovative auction platform dedicated exclusively to the industrial sector. By focusing on machinery sales from business closures, restructurings, and bankruptcies, we provide a trusted marketplace where buyers and sellers connect with confidence. Unlike general auction houses, Dome Auctions specializes in selling complete industrial assets directly from factories, ensuring quality and reliability. With a commitment to transparency, industry expertise, and tailored service, we streamline the sales process and maximize value for all parties. As online auctions continue to grow in the European industrial market, Dome Auctions offers a professional and efficient solution for companies seeking high-quality machinery at competitive prices.

Condition: excellent (used), I am offering a professional industrial extraction unit / industrial vacuum cleaner from the renowned German brand AL-KO, model POWER UNIT APU 100. This unit is designed for extracting dust and contaminants in an industrial environment – ideal for workshops, carpentries, and manufacturing plants. The equipment is in very good technical condition and ready for immediate use. ⚙️ Technical Specifications - Manufacturer: AL-KO (Germany) - Model: POWER UNIT APU 100 - Year of manufacture: 2021 - Power supply: 400V / 50Hz (3-phase) - Motor power: 1.5 kW - Airflow: approx. 865 m³/h - Negative pressure: 2124 Pa - Connection diameter: 100 mm - Speed: 2896 rpm - Protection class: IP54 - Weight: approx. 116 kg ✅ Technical Condition - Complete device - Fully functional, ready for operation - Very good visual condition - No mechanical damage Dkjdpeyxtf Refx Adaek - Used – normal signs of use 📦 Included in the set - AL-KO POWER UNIT APU 100 extraction unit - Complete set as shown in the photos - Documentation (user manual) 🏭 Typical Applications - Carpentry workshops and wood processing plants - Production and workshop environments - Dust and chip extraction - Dust extraction systems

Year of construction: 2009, condition: ready for operation (used), - USED - ELECTRICAL AUTOMATIC PANEL BENDER FOLD LENGTH: 2150 mm MAX FOLD HEIGHT: 200 mm MIN LENGTH/WIDTH BETWEEN FOLDS: 160-350 mm TONNAGE: 32 ton CONTROL UNIT: SIEMENS 840D WEIGHT: 30000 Kg Dkedevhc Stopfx Adaek OVERALL DIMENSIONS: 8500 x 7000 x 2850 mm ACCESSORIES: AUTOMATIC TOOL CHANGE ; MANIPULATOR ; REVERSE BENDING CYCLE ; SHEET METAL CENTERING SYSTEM NOTE: NO 2 ASP/700 CNC AUXILIARY AXIS; ADDITIONAL UPPER TOOL; LOADING/UNLOADING SYSTEM

Condition: excellent (used), functionality: fully functional, Year of construction: 2016, Laser Machine Prima Power CV 5000 Year of Manufacture: 2016 3.1. CV SERIES CO₂ LASER SPECIFICATIONS (CV 5000) Average Power Output: 200 W – 5000 W Peak Power Output: Up to 6 kW Wavelength: 10.6 microns Beam Quality Factor (M²): < 2.4 (typically 2.1 to 2.3) Beam Divergence: 1.5 mrad (half angle) Beam Diameter at Exit: 15 mm 1/e², 21 mm full beam Pulsed Operation – Pulse Repetition Rate: 0 – 2 kHz Pulse Duration: 250 microseconds, 70 µs resolution Alignment Stability: +/- 150 µrad Operating Conditions: • Ambient temperature (max.): 40°C • Ambient temperature (min.): 10°C • Relative humidity: < 95% (non-condensing) Diode Laser: • Wavelength: 635 nm • Output Power: < 1 mW ——— 3.2. CV SERIES CO₂ LASER SUPPLY SPECIFICATIONS (CV 5000) Electrical: • Power requirement: 37 kW • Voltage: 400 VAC – 460 VAC ±10%, 3-phase Cooling: • Required cooling capacity: 45 kW • Flow rate: 133 L/min (35 GPM) • Inlet temperature: 18 – 20°C • Maximum inlet pressure: 6 bar • Nominal inlet pressure: 3 bar • Differential pressure: 1.5 bar • Coolant: Distilled water with 35% Dowfrost HD • Filtration requirement: 100 micron Gas: • Type / Purity / Gas mixture / Consumption: • He: 99.996% | 67.7% | 13.4 – 46.8 SLPH • CO₂: 99.995% | 4.1% | 0.9 – 3.0 SLPH • N₂: 99.996% | 28.2% | 5.8 – 20.2 SLPH • Total Consumption: 20 – 70 SLPH (variable) Additional Requirements: • < 10 ppm water vapor, hydrocarbons, and oxygen • Air: dry – dew point < 2°C • Depending on shutter utilization Dkjdpfxeywwrfs Adaek

Condition: excellent (used), functionality: fully functional, Year of construction: 2016, Laser Machine Prima Power CV 5000 Year of manufacture: 2016 3.1. CV SERIES CO₂ LASER SPECIFICATIONS (CV 5000) Average power: 200 W – 5000 W Peak power: Up to 6 kW Wavelength: 10.6 micrometers Beam quality factor (M²): < 2.4 (typically 2.1 to 2.3) Dkjdpfxoywwq Us Adask Beam divergence: 1.5 mrad (half-angle) Output beam diameter: 15 mm 1/e², 21 mm full beam Pulsed operation – pulse repetition rate: 0 – 2 kHz Pulse width: 250 microseconds, 70 µs resolution Alignment stability: +/- 150 µrad Operating conditions: • Ambient temperature (max): 40 °C • Ambient temperature (min): 10 °C • Relative humidity: < 95% (non-condensing) Diode laser: • Wavelength: 635 nm • Output power: < 1 mW — 3.2. CV SERIES CO₂ LASER SUPPLY SPECIFICATIONS (CV 5000) Electrical: • Power consumption: 37 kW • Voltage: 400 VAC – 460 VAC ±10%, 3-phase Cooling: • Required cooling capacity: 45 kW • Flow rate: 133 L/min (35 GPM) • Inlet temperature: 18 – 20 °C • Maximum inlet pressure: 6 bar • Nominal inlet pressure: 3 bar • Differential pressure: 1.5 bar • Coolant: Distilled water with 35% Dowfrost HD • Filtration requirement: 100 micron Gas: • Type / Purity / Gas mixture / Consumption: • He: 99.996% | 67.7% | 13.4 – 46.8 SLPH • CO₂: 99.995% | 4.1% | 0.9 – 3.0 SLPH • N₂: 99.996% | 28.2% | 5.8 – 20.2 SLPH • Total consumption: 20 – 70 SLPH (variable) Additional requirements: • < 10 ppm water vapor, hydrocarbons, and oxygen • Air: dry – dew point < 2 °C • Depending on shutter usage

Condition: like new (used), functionality: fully functional, Year of construction: 2024, operating hours: 100 h, control type: manual, degree of automation: semi-automatic, actuation type: electric, controller manufacturer: ABB, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, type of cooling: water, compressed air connection: 8 bar, Equipment: centralized greasing system, cooling unit, documentation/manual, emergency stop, High Pressure Unit 90PW3 for Sale Model: 90PW3 (explosion-proof motor) Manufacturer: Power (Tianjin) Technology Co. Dedpfx Aeyxy D Tjdajkk Key Technical Specifications - Maximum pressure: 140 MPa (extendable to 276 MPa by changing the hydraulic head) - Rated flow: 30 L/min - Rated power: 90 kW - Transmission ratio: 2.75:1 - Rated speed: 530 RPM - Plunger diameter: 18 mm - Dimensions: 2000 × 1200 × 800 mm - Weight: 1200 kg Main Components Included - 90PW3 high-pressure triplex pump - Explosion-proof motor - Flexible pin coupling - Booster centrifugal pump (feed) - Bag filter + Y-strainer - Pneumatic valve (automatic opening at 55 MPa) - Control panel with indicators - ABB soft starter - Water storage tank with level control (IFM sensor), PLC-controllable pneumatic intake valves Technical Advantages - Forced lubrication – prevents overheating due to friction - "Super simple" maintenance: quick removal of packing and valves

Condition: new, Year of construction: 2024, functionality: fully functional, overall weight: 1,610 kg, fuel type: diesel, color: yellow, power: 100 kW (135.96 HP), output current: 180 A, output voltage: 400 V, output frequency: 50 Hz, type of output current: three-phase, nominal power: 100 kW (135.96 HP), nominal power (apparent): 125 kVA, continuous power: 100 kW (135.96 HP), continuous power (apparent): 125 kVA, total length: 2,900 mm, total width: 1,150 mm, total height: 1,600 mm, rotational speed (max.): 1,500 rpm, motor manufacturer: Yunnei EURO 5, type of cooling: water, emission class: euro5, Equipment: AdBlue, HELVETICA POWER offers: 125 KVA generator with 100% copper alternator, digital control, and ATS unit for emergency power operation. Remote control is built-in. With Oil- and water Heater. CE-certified Yunnei Stage V diesel engine suitable and approved for continuous operation in accordance with applicable emissions standards. Stamford type: CE-certified quality brushless synchronous alternator with 100% copper winding! Dedpfsyvktajx Adaskk Delivery (surcharge) possible worldwide. Optional: Looking for something else? More or less kW, a different engine (Cummins, Deutz, Volvo, etc.), a larger tank, an additional tank - contact us. We can also customize your generator. Pickup: from our warehouse in Konstanz (Germany) or Kefikon (Thurgau). Delivery is available. Worldwide delivery is possible. Dealer inquiries welcome - please contact us. We have various emergency power generators (from 7 kW to 100 kW) available from stock in Switzerland and Germany. We also have various power generators with STAGEV engines in various sizes available from stock in Switzerland and Germany.

Condition: new, Year of construction: 2025, functionality: fully functional, type of cooling: air, total width: 540 mm, total length: 920 mm, total height: 760 mm, fuel: diesel, overall weight: 159 kg, continuous power (apparent): 9 kVA, continuous power: 7 kW (9.52 HP), rotational speed (max.): 3,000 rpm, warranty duration: 12 months, noise level: 71 dB, power: 8 kW (10.88 HP), nominal power: 7.7 kW (10.47 HP), nominal power (apparent): 9 kVA, fuel type: diesel, color: yellow, output voltage: 400 V, output current: 13 A, output frequency: 50 Hz, type of output current: three-phase, Electric starter generator. The generator is available from stock in Kefikon (Switzerland) and Konstanz (Germany). Other models in various sizes (10 kW, 15 kW, 20 kW, and up to 100 kW) are available from stock, including those with STAGEV engines. Service available in Switzerland and throughout Europe. Dksdjmu N Tkjpfx Adaok Pickup. Delivery worldwide possible. Dealer inquiries welcome – contact us!

Condition: new, Year of construction: 2024, functionality: fully functional, overall weight: 1,100 kg, fuel type: diesel, color: yellow, power: 30 kW (40.79 HP), output current: 54 A, output voltage: 400 V, output frequency: 50 Hz, type of output current: three-phase, nominal power: 30 kW (40.79 HP), nominal power (apparent): 38 kVA, continuous power: 30 kW (40.79 HP), continuous power (apparent): 38 kVA, total length: 2,110 mm, total width: 1,000 mm, total height: 1,350 mm, rotational speed (max.): 1,500 rpm, motor manufacturer: Yunnei STAGEV, type of cooling: water, HELVETICA POWER offers: 30 KW 38 KVA Generator / Diesel Generator ⭐️ Stage V (EU) / Euro 5 compliant – suitable and approved according to current European emission standards. ⭐️ Oil-tight chassis, ideal for construction sites, industry, agriculture, and many other applications. ⭐️ CE-compliant in accordance with applicable regulations ⭐️ Sound-insulated (Super Silent) design ⭐️ Equipped with emergency power switch / ATS (Automatic Transfer Switch) unit for backup power operation ⭐️ Digital control panel plus integrated remote control Dksdowbkkpjpfx Adajk ⭐️ Yunnei Stage V diesel engine designed for continuous operation ⭐️ Stamford type (licensed CN): CE-certified high-quality brushless synchronous alternator with 100% copper winding ⭐️ AVR system (automatic voltage regulation dependent on load) ⭐️ The generator is delivered with a practical, heavy-duty yellow tarpaulin truck cover Warranty / Guarantee / Service ⭐️ One-year factory warranty! ⭐️ Optional: up to 2-year extended warranty, significantly exceeding industry standards (extendable upon request). ⭐️ Our insurance partner: Allianz Suisse / Allianz Germany (for Europe) ⭐️ Service available throughout Switzerland and Europe. Payment / Delivery ⭐️ Payment: due at purchase. ⭐️ Delivery available throughout mainland Europe for an additional charge. 🚚 Pickup: from our warehouses in Kefikon (TG, Switzerland) or Konstanz (Germany) 🚚 Worldwide delivery upon request 👍 Dealer inquiries welcome – contact us! ⭐️⭐️⭐️⭐️⭐️⭐️⭐️⭐️⭐️⭐️⭐️⭐️⭐️ More Models & Configurations ⭐️ Other power ratings available (approx. 7 kW to 100 kW) ⭐️ Stage V (EU) / Euro 5 compliant versions ⭐️ Alternative engine options available (e.g. Cummins, Deutz, Volvo) ⭐️ Optional features: larger tank, auxiliary tank, tank and water heating ⭐️ Many versions available from stock in CH / DE. ⭐️⭐️⭐️⭐️⭐️⭐️⭐️⭐️⭐️⭐️⭐️⭐️⭐️ Keywords: power generator, generator, emergency generator, backup generator, power unit, energy generator, power supply unit, standby power unit, emergency power supply, NEA, backup power, replacement power, backup power supply, power supply, power source, autonomous power supply, off-grid operation, site power, construction site generator, event power, camping power, outdoor power supply, diesel generator, petrol generator, gas generator, inverter generator, synchronous generator, asynchronous generator, three-phase generator, single-phase generator, 230V generator, 400V generator, high-voltage generator, small generator, industrial generator, professional generator, high-performance generator, silent generator, super silent generator, sound-insulated generator, mobile generator, portable generator, stationary generator, home backup power, commercial power, industrial power, agricultural generator, construction equipment, workshop power, server backup, PV backup, hybrid generator, ATS, automatic transfer switch, power distributor, CEE generator, high-voltage connection, generator with AVR, voltage regulator, power maker, power device, backup power device, diesel power unit, construction site power unit, 22KW 28KVA 30KW 38KVA 34KW 43KVA 44KW 55KVA 19KVA 15KW 38KVA 30KW 63KVA 50KW 125KVA 100KW 100KVA 80KW

Condition: like new (used), Year of construction: 2025, operating hours: 5 h, functionality: fully functional, machine/vehicle number: 01/2025, Large-format laminator for laminating materials from roll. The machine is adapted for coating PVC tarpaulins. New machine from 2025, used 3 times for testing purposes only. Machine dimensions: 4200x1200x1400 (LxWxH). Weight: approx. 600 kg. Production capacity: 30 linear meters/hour. Lacquer application: forced via 24V peristaltic pump up to 20L/h. Djdpsyxfqlofx Adajkk Capable of coating products up to 3.2 m wide. Machine equipped with a strip of IR emitters (12 pcs) for lacquer drying, a blower strip for product cooling, and thermocouples for temperature measurement. Tension regulation of the material is managed by pneumatic reducers. Media: power supply 3-phase/64A/5-pin plug, installed power up to 10kW, compressed air up to 4 bar. Machine under warranty, CE Machinery Directive compliant. User manual available. Machine is connected to utilities and can be tested on-site.

Condition: excellent (used), Year of construction: 2025, operating hours: 2 h, lifting height: 3,000 mm, fuel type: diesel, power: 39 kW (53.03 HP), Empty weight: 3.680 kg Lifting capacity: 2.500 kg Maximum passing height: 207 cm CE mark: yes Technical condition: very good Visual appearance: very good Dsdpfjxkrv Asx Adajkk Please contact Tobias Mayr for more information

Condition: good (used), functionality: fully functional, Year of construction: 2012, machine/vehicle number: 778 F 319, Lazer Cutting Djdpfx Ajmx Rrledaokk Fabrikat: Prima Power Typ: Palatino 1530 Baujahr: 2012

Year of construction: 2008, condition: ready for operation (used), This Finn-Power LP 8 turret punch press was manufactured in 2008. It features a maximum punching force of 30 tons and a punching working area of 1500 × 3000 mm. The machine includes a threading/tapping unit capable of mounting 6 taps up to M8 and a versatile tool turret. Consider the opportunity to buy this Finn-Power LP 8 turret punch press. Contact us for further details. • Max punching force: 30 tons • Max sheet loading size: 1500 × 4000 mm • Max sheet unloading size: 1500 × 4000 mm Dsdpfsyh I Ibox Adaekk • Punching working area: 1500 × 3000 mm • Laser working area: 1500 × 2500 mm • Threading/tapping unit in turret: up to 6 taps, max M8 • Tool turret configuration: • 1 × Multitool 8/24 • 2 × Multitool 8/16 • 5 index stations • 1 forming station for forming operations • Unloading flaps: 2 for single parts (front and side)

Condition: ready for operation (used), Year of construction: 2023, This Prima Power Laser Genius + 1530 was manufactured in 2023. It features an 8kw laser with chiller, open cabins on both sides, safety glasses on doors, and a high-capacity dust collector. It includes advanced cutting technologies like NIGHT Cut, SMART Cut, and MAX Cut, plus an ATC automatic tip changer with 20 nozzle stations. Consider the opportunity to buy this Prima Power Laser Genius + 1530 fiber laser cutting machine. Contact us for more information. Additional equipment • Laser with 8kw and chiller • Open Cabin with right and left side accessible doors • Safety glasses on the doors • NIGHT Cut for safer cutting and piercing process • SMART Cut for faster processing of thin material Dsdsx D Ebropfx Adaskk • MAX Cut for piercing process time reduction for thick material • Gas Mixer Cut • Nozzle check and OPC by camera • Adaptive cut • ATC automatic tip changer with 20 nozzle stations Machine Benefits Technical Machine Benefits • Dust collector for high production (3200m3/h) with 6 cartridges • Automatic selector for additional cutting gas • Uninterruptible power supply (ups) • Fleet manager remote care via tosibox • Interface to nt or automation connection • Interface for psr 2d Extra Information Machine still under power

Condition: ready for operation (used), Year of construction: 2007, punching force: 31 t, total height: 2,200 mm, total width: 5,165 mm, travel distance X-axis: 2,500 mm, travel distance Y-axis: 1,250 mm, overall weight: 12,000 kg, controller manufacturer: SIEMENS, controller model: SINUMERIK 840D CNC, product length (max.): 5,570 mm, number of axes: 2, This 3s Finn-Power C5 + Compact Express CNC punching machine was manufactured in 2007. It features a working area of 2500 × 1250 mm and a punching force of 30 tonnes. With 20 tool stations and a maximum tool diameter of ~89 mm, it offers efficient operation. Consider the opportunity to buy this Finn-Power C5 + Compact Express CNC punching machine. Contact us for further details. Dkedpfxjyiz Ige Adaek • Maximum sheet thickness (steel): 8 mm • Number of tool stations: 20 • Maximum tool diameter: ~89 mm • Table clamps: 3 (typically pneumatic) • Sheet weight capacity: ~200 kg • Traverse speeds: X ~90 m/min; Y ~60 m/min • Table support: vacuum or brush table Additional equipment • Automatic loading/unloading system (automatic material handling, loaders/unloaders) • Chip/slug conveyor belt

Condition: ready for operation (used), Year of construction: 1996, operating hours: 22,000 h, overall weight: 12,000 kg, total height: 2,200 mm, punching force: 31 t, number of axes: 3, This 3-axis Finn-Power Shear Genius TRS 6 SBU was manufactured in 1996, featuring a punching force of 300 kN and a sheet working range of 2500 mm × 1250 mm. It supports up to 21 tool stations and can handle sheet thicknesses up to 6 mm. Automatic tool change system enhances productivity. Consider the opportunity to buy this Finn-Power Shear Genius TRS 6 SBU punching and bending machine. Contact us for more information. Machine Benefits Technical Machine Benefits • Max material thickness: approx. 6 mm (mild steel) • Sheet working range: approx. 2500 mm x 1250 mm (without repositioning) • Positioning accuracy: ±0. 1 mm • Tool stations: up to 21 • Indexable tool stations: yes Dkjdpfoyaqnqex Adaok • Tool change system: automatic Extra Information Machine still under power Dimensions Machine Depth 5500 mm

Condition: ready for operation (used), Year of construction: 2003, operating hours: 28,003 h, This Finn-Power TRS 6 SUV was manufactured in 2003. A robust CNC punching and shearing machine, it features a punching force of 300kN and shearing force of 250kN. It includes a turret with 20 tool positions and optional a sheet metal storage capable of handling 40 pallets. Ideal for high-quality punching capabilities. Contact us for more information. Dksdex D H Dbepfx Adaok Additional information • Punching Force: 300 kN • Shearing Force: 250 kN • Various spare parts • Weight: 22000 kg • Optional: Sheet Metal Storage: 40 pallets, 3000 x 1500 x 150 mm

Condition: ready for operation (used), Year of construction: 2017, operating hours: 18,924 h, laser power: 3,000 W, travel distance Z-axis: 150 mm, overall weight: 11,000 kg, number of axes: 3, This 3-axis Prima Power Platino 1530 was manufactured in 2017. It features a 3 kW CO₂ laser, a working area of 3000 × 1500 mm, and can handle mild steel up to 15 mm, stainless steel up to 8 mm, and aluminum up to 6 mm. It includes an automatic pallet changer and a CNC Touch Interface. If you are looking to get high-quality laser cutting capabilities, consider the Prima Power Platino 1530 machine we have for sale. Contact us for more information. • Working area (X × Y): 3000 × 1500 mm • Positioning accuracy: ±0.05 mm • Repeatability: ±0.03 mm • Drive system: CNC-controlled with brushless servo motors • Control unit: Prima Power CNC Touch Interface Dodpfx Aex D Nyxsdaokk • Cooling: Water-cooled • Fume extraction system: Integrated • Total operating hours: 18,924 h Additional equipment • Automatic pallet changer

Year of construction: 2012, condition: ready for operation (used), General Data Measurements width 4000 mm Measurements depth 9000 mm Measurements height 3200 mm Machine weight 12000–14000 kg Control Unit Brand Prima Main Drive Number of axis 5 Laser power 3 kW Dodex D Efkspfx Adaskk This 5-axis Prima Power Rapido was manufactured in 2012, featuring a cutting area of 4080 mm (X) × 1530 mm (Y) × 765 mm (Z) and a laser power of 3000 W. It handles 3D sheet metal parts efficiently with speeds up to 60 m/min. Ideal for automotive and aerospace applications. If you are looking to get high-quality cutting capabilities consider the Prima Power Rapido machine we have for sale. Contact us for more information. Application Types Cutting