Used Boiler Feed Pump for sale (20,390)

Condition: used, Pfeiffer Pfeiffer Vacuum HLT 560 Helium Leak Detector Professional leak testing, sniffing & vacuum operation with pre-pump: Vacuubrand MV 10 NT (max. approx. 10–11 m³/h) Fodjzix Hxepfx Aipogi Description: For sale is a professional Pfeiffer Vacuum HLT 560 helium leak detector. The device is designed for highly precise leak testing using helium and is typically used in industry, manufacturing, quality assurance, laboratories, and technical service. It is suitable for the reliable detection of even the smallest leaks. The HLT 560 operates using mass spectrometry and can be used in both vacuum and sniffing modes. With the sniffing probe, leak locations can be precisely identified, while in vacuum mode, complete assemblies or systems can be tested. The turbo pump and pre-pump are integrated, making the device usable as a complete, mobile testing system. Application areas (examples): Leak testing of components and assemblies Testing of vacuum chambers, pipelines, valves, heat exchangers Quality control in production Service and maintenance work on vacuum equipment Technical data: Manufacturer: Pfeiffer Vacuum Model: SmartTest HLT 560 Manufacturer: Pfeiffer Vacuum Integrated turbo pump Pre-pump: Vacuubrand MV 10 NT (max. approx. 10–11 m³/h) Measuring gas: Helium Measuring principle: Mass spectrometric helium leak detection Operating modes: Vacuum mode / Sniffing mode Reference leak rate: (7.4 ±15 %) × 10⁻⁷ mbar·l/s Dimensions (approx.): Height: 110 cm Width: 50 cm Depth: 60 cm Interfaces: RS232, RS485, Relay I / II, Gauge connection Power supply: 230 V / 50 Hz Power consumption: approx. 400 VA Weight: approx. 70 kg Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have over the phone.

Condition: excellent (used), KWB Powerfire TDS 150 – automatic biomass boiler Used Austrian wood chip and pellet boiler with modulating output from 45 to 150 kW, suitable for commercial, agricultural and industrial heating. Key features: - Moving grate combustion - Lambda-controlled combustion and cyclone combustion chamber - Automatic heat exchanger cleaning - Automatic ash extraction - Wood chips G30/G50 or pellets Factory specifications: - Nominal output: 150 kW - Minimum output: 45 kW - Maximum operating pressure: 3.5 bar - Maximum supply temperature: 90 degrees C - Water capacity: 300 litres - Efficiency with wood chips: 90.4 percent at nominal load Fjdpfxszqnp So Aipegi In stock. Inspection by appointment. Please confirm the exact scope of delivery and accessories before purchase. Transport and installation by separate arrangement. We also offer wood chip boilers, pellet boilers, wood gasification boilers, feeders, pumps, buffer tanks and heating accessories.

Condition: used, total length: 1,200 mm, total width: 800 mm, total height: 700 mm, Year of manufacture: 2006 Colour: Grey Price: On request Fgsdjywxpxspfx Aipei - Year: 2006 - Documentation available: No - CE certificate present: No - Serial number: D2097712 - Transport dimensions: 1200mm x 800mm x 700mm (l x w x h) - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: new, Motor-driven dosing pump for precise industrial dosing of chemical liquids. It operates from a single-phase mains supply and can pump up to 63 litres of liquid per hour, reaching a pressure of 10 bar. Fjdpfxj Afdxpo Aipjgi

Condition: new, Year of construction: 2025, functionality: fully functional, scientific multi-stage vacuum pump, • Manufacturer: Edwards Limited (Burgess Hill, UK) • Model Number: nXL200i Enhanced • Edwards Part Number: A77062322 • Agilent Cross-Reference Part Number: G2571-83000 (indicated by the factory "Agilent Part No." overlay) • Serial Number: 250174696 • Country of Origin: Made in CZ (Czech Republic) • Regulatory Compliance: CE Mark, EAC, UKCA, TÜV Rheinland (C/US) Safety Certified Fsds Af Nq Sopfx Aipogi Technical Specifications The Edwards nXL200i Enhanced series is a high-performance, oil-free dry multistage Roots vacuum pump optimized primarily for laboratory analytical instrumentation backing duties (e.g., LC-MS and ICP-MS systems): • Peak Pumping Speed: 200 m³/h (at 50/60 Hz) • Ultimate Vacuum (Total Pressure): < 0.02 mbar • Inlet Flange Connection: NW40 • Outlet Flange Connection: NW25 • Voltage Input Capability: 200–240 V (±10%), Single-Phase, 50/60 Hz • Power Consumption (at Ultimate Vacuum): < 700 W • Cooling Method: Air-cooled • Physical Weight: 78 kg (approx. 172 lbs) • Acoustic Noise Level: 57 dB(A) at ultimate vacuum Brand new never used. Please check out our other listings as well.

Condition: used, total length: 850 mm, total width: 350 mm, total height: 400 mm, Year of manufacture: 1998 Fgodpfx Ajxm Rgfoipei - Year: 1998 - Serial number: A1494418 - Transport dimensions: 850mm x 350mm x 400mm (l x w x h) - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of manufacture: 2000 Colour: Grey Veneer press continuous press gluing press plate press Colombo Machine dimensions: 4500x1300 Oil heated to a maximum of 140 degrees input/outpu t6 cylinders Solid plates 40mm - Details: - └ Description: Osama glue roller not included - Year: 2000 Fodpfx Aiownhabspogi - Press drive: Hydraulic - Max. workpiece length [mm]: 4500 - Max. workpiece width [mm]: 1300 - Max. workpiece height [mm]: 140 - Total stroke [mm]: 140 - Number of stages [pcs]: 1 - Number of cylinders [pcs]: 6 - Cylinder diameter [mm]: 120 - Heating boiler present: Yes - Heating type: Oil heated - Max. working temperature [°C]: 140 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: excellent (used), For sale: professional industrial pump ASTRA CM 50-125A, manufactured in Italy (Padova, Italy). The pump is in very good visual and technical condition. Robust construction designed for installations, water systems, and technological circuits. Three-phase motor 5.5 kW, 2800 rpm, 400 V power supply. The pump is equipped with threaded connections. The unit has been regularly serviced – inspection sticker by DPT is present. Very durable equipment – Italian production, heavy-duty cast iron construction. Technical data • Manufacturer: ASTRA (Padova, Italy) • Model: CM 50-125A • Type: three-phase electric pump • Motor power: 5.5 kW • Power supply: 230 / 400 V • Speed: 2800 rpm • Maximum capacity: 1200 l/min • Head: 25 m • Insulation class: F • Protection rating: IP55 Shipping or personal collection possible. Fedpfx Aiez Slq Nopsgi The listed price is for 1 piece.

Condition: excellent (used), I am selling a fully functional, tested set of two Rexroth hydraulic pumps. The pumps are connected as a single unit and equipped with control elements and Rexroth valves. The unit shows signs of use, which can be seen in the photos. The sale includes the complete unit shown in the photographs. Fsdpfxoz Spflo Aipogi The following markings were read from the nameplates: Component Designation / Number Rexroth pumps SY2DFE1-11/071-071/... +00908620 Pump material number 00908632 Part number on the nameplates 21559404 01 Serial number of the first pump 1714777 Serial number of the second pump 1766280 Year of manufacture on the pump nameplates A038 Rexroth valves STW V Valve material number 00905187 Additional number on the valves 21539727 01 Designation on the valves A035

Condition: excellent (used), For sale: a linear pump from the renowned German company KSB, model ETALINE ETL, complete with a Siemens motor. This unit is designed for use in industrial installations, heating and cooling systems, and water circulation systems. PUMP TECHNICAL DATA Manufacturer: KSB Model: ETALINE ETL Flow rate (Q): 40 m³/h Head (H): 12 m Impeller diameter: 191 mm Rotational speed: 1459 rpm Year of manufacture: 2021 Flanged connections Fgjdoz Slydopfx Aipsi MOTOR Manufacturer: Siemens Power: 0.55 kW Voltage: 400 V, 50 Hz Speed: approx. 1440 rpm Efficiency class: IE3 Design: ATEX Ex II 2G Protection: PTC CONDITION Very good condition Complete unit Slight signs of storage are visible Technically sound APPLICATION Industrial installations HVAC systems Water and liquid circulation Production plants Explosion-proof zones

Condition: excellent (used), I am offering a vacuum pump from the reputable brand BUSCH, model SV 1025 B. The device is fully functional – tested and ready for operation. Technical data: Fgsdpfxez Sl Dcj Aipei • Model: SV 1025 B • Manufacturer: BUSCH • Country of manufacture: Switzerland • Ultimate pressure: 120 mbar • Type: vacuum pump for air and gases Applications: • vacuum installations • vacuum packaging • industry • production machinery Condition: The item is used, shows normal signs of use, and is in good technical condition. Fully operational. Included in the set: • BUSCH SV 1025 B pump • visible installation/connection

Condition: excellent (used), For sale: industrial KSB centrifugal pump, type EB 32-160, equipped with a 4 kW electric motor. Pump data: • Manufacturer: KSB – Klein, Schanzlin & Becker AG • Type/model: EB 32-160 • Pump number: Motor data: • Motor number: 3358128- • Motor type: AF 112M/2A-11 • Power: 4 kW • Voltage: 380 V • Rotational speed: 2870 rpm Fjdpfx Aez Snt Hjipjgi • Current: 8.1 A • Frequency: 50 Hz • Protection class: IP54 • cos φ: 0.89 The pump and motor were likely refurbished and inspected by a specialized service provider in 2024, as indicated by the stickers from Elektromotoren Reparaturwerk ROCK and the inspection marking from 2024. We have inspected the pump and it is in working order. Used condition. The exact condition of the device is shown in the pictures.

Condition: excellent (used), For sale: an industrial KSB ETABLOC GN 40-160/402 centrifugal pump with a 4.6 kW electric motor. Pump specifications: • Manufacturer: KSB • Model: ETABLOC GN 40-160/402 • Design: GN11 • Pump serial number: 4-925-237868/1 • Flow rate: 7.5–32.5 m³/h • Head: 35.8–32.5 m • Pump speed: 2900 rpm • Year of manufacture: 2000 Motor specifications: • Motor type: QU FA 112M2A-60 • Motor serial number: 146249 RU • Power: 4.6 kW • Power supply: three-phase • Frequency: 50 Hz • Voltage: 380–420/660–725 V • Current: 7.8–7.6/4.5–4.4 A • Speed: 2850 rpm • cos φ: 0.91 • Protection class: IP55 • Insulation class: F • Operating mode: S1 • Pump weight: 57 The pump is used and is in the condition shown in the pictures. Normal signs of use and storage are visible. Fgjdoz Snubepfx Aipoi

Condition: excellent (used), For sale: industrial KSB ETABLOC-GN 32-125.1/024.1 centrifugal pump with a 0.25 kW electric motor. Pump specifications: • Manufacturer: KSB • Model: ETABLOC-GN 32-125.1/024.1 • Design: GN • Pump serial number: 4-925-104322/1 • Pump speed: 960 rpm Motor specifications: Fgjdpoz Snuqefx Aipsi • Motor serial number: 9870132-0090-0007 • Power: 0.25 kW / 0.34 HP • Power supply: three-phase • Voltage: 400/230 V • Frequency: 50 Hz • Speed: 890 rpm • Current: 0.85/1.49 A • cos φ: 0.73 • Protection class: IP54 • Insulation class: F • Operating mode: S1 • Mounting method: IM B14 The motor has a sticker from Eduard Leger GmbH – an authorized KSB service center. The pump is used and is in the condition shown in the pictures. Normal signs of use and storage are visible.

Condition: excellent (used), For sale, a used KSB ETABLOC-G 32-200/752 centrifugal pump equipped with a 7.5 kW electric motor. The pump has been inspected – it is fully functional and ready for operation. Pump data: Manufacturer: KSB Aktiengesellschaft Model: ETABLOC-G 32-200/752 Ident-No.: 48862637 Design: G11 No.: 5-927-123823/1 Flow rate Q: 35 m³/h Head H: 61.5–43 m Pump speed: 2900 rpm Additional designation: Pumpen Distel Type: G32-200/752 No.: 198057/2 Motor data: Manufacturer: KSB Type: QUPS 132S2C-60 Power: 7.5 kW Power supply: 3-phase Frequency: 50 Hz Fodpfoz Snu Njx Aipegi Voltage: 380–420 / 660–725 V Current: 14.7–14 / 8.5–8.1 A Speed: 2880 rpm cos φ: 0.90 Protection class: IP55 Insulation class: F Used pump, in good technical condition. Normal signs of use and storage are visible. The visual condition is accurately shown in the photos. The pump has been inspected, is fully functional, and ready for further use. The item for sale is exactly the one shown in the photos.

Condition: excellent (used), For sale: an industrial KSB ETABLOC-G 32-125/222 centrifugal pump with a 2.2 kW electric motor. Fgsdpfx Aez Snvgjipei The pump has been inspected and is in good working order. Pump technical specifications: Manufacturer: KSB Model: ETABLOC-G 32-125/222 Identification number: 48862622 Flow rate: 4–30 m³/h Head: 25–18 m Pump speed: 2900 rpm Additional type: G32-125/22 2 Number: 198057/6 Motor specifications: Power: 2.2 kW Power supply: three-phase Voltage at 50 Hz: 220–240 / 380–420 V Speed: 2850 rpm Frequency: 50 Hz Power factor: cos φ 0.89 Protection class: IP55 Insulation class: F

Condition: new, For sale: a NEW, unused KSB ETABLOC-G 32-200/552.2 centrifugal pump with a 5.5 kW electric motor. The pump comes from a warehouse stock and has never been used. It is offered with the original KSB carton. A professional, industrial monobloc pump from the renowned manufacturer KSB, designed for use in industrial installations, water circulation systems, cooling and heating systems, and technological systems. Technical data: Manufacturer: KSB Model: ETABLOC-G 32-200/552.2 Ident-No.: 48862635 Flow rate Q: 5–33.5 m³/h Head H: 47.5–25 m Pump speed: 2900 rpm Motor power: 5.5 kW Power supply: 3-phase Frequency: 50 Hz Voltage: 380–420 / 660–725 V Motor speed: 2880 rpm Ingress protection: IP55 Insulation class: F Net weight according to label: 62 kg Condition: NEW / UNUSED – warehouse stock. Fodpfx Aisz Snz Njpjgi Original KSB carton included. The item sold is exactly the one shown in the pictures.

Condition: new, For sale: a NEW, unused KSB ETABLOC-G 50-125/302 G4 centrifugal pump with a KSB electric motor. The pump is a warehouse stock item – it has never been used in an installation. It comes from older warehouse stock, so there may be minor marks on the housing resulting solely from long-term storage. The pump is offered with the original KSB carton and documentation as shown in the photos. Fedpfjz Sn Icjx Aipjgi Pump technical data: Manufacturer: KSB Model: ETABLOC-G 50-125/302 G4 Identification number: 48817003 VC-No.: 5-927-123534 / 001 Flow rate Q: 20–80 m³/h Head H: 16–10 m Rotational speed: 2900 rpm Year of manufacture: 1995 Net weight: approx. 51 kg Gross weight: approx. 55 kg Motor data: Manufacturer: KSB Type: LS100L Power: 3.0 kW at 50 Hz Rotational speed: 2840–2870 rpm at 50 Hz Voltage: 380 / 420 / 660 V – as per the nameplate Protection class: IP55 Insulation class: F Operating mode: S1 Motor number: 149610EL022 Condition: NEW / UNUSED – WAREHOUSE STOCK ITEM. The pump has not been used. Any minor marks on the surface are due to storage and the age of the device. The scope of sale is exactly as shown in the photos – pump with motor, original KSB packaging, and available documentation.

Condition: new, For sale is a NEW, unused KSB ETABLOC GN 40-125/402 G10 centrifugal pump with the original KSB electric motor. Fgjdpjz Sn Ipjfx Aipji This is a warehouse stock item – the pump has never been used or operated. Due to long-term storage, there may be only minor signs of storage or transport. The pump is in very good, virtually factory condition. The original KSB packaging, as shown in the pictures, is also available. Pump technical specifications: Manufacturer: KSB Model: ETABLOC GN 40-125/402 G10 Flow rate Q: 31.00 m³/h Head H: 25.45 m Rotational speed: 2950 rpm Year of manufacture: 22 Mat.-No.: 216137 Number: 9972270914 CE marking Motor specifications: Manufacturer: KSB Power: 4.0 kW Voltage: 400 V Δ / 690 V Y Frequency: 50 Hz Speed: 2950 rpm Rated current: 7.8 A at 400 V Efficiency: 85.8% cos φ: 0.86 Protection class: IP55 Insulation class: 155 (F) Efficiency class: IE2 Design: IMV1 Made in the Czech Republic Condition: NEW / UNUSED / WAREHOUSE STOCK The pump has never been used or operated. Any minor visual marks are solely due to storage and transport. The set for sale is exactly as shown in the pictures.

Condition: excellent (used), Industrial centrifugal pump SPECK-PUMPEN Hilpoltstein for sale, complete with a Bauknecht 15 kW electric motor. Pump specifications: Manufacturer: Speck-Pumpen Hilpoltstein Type: 50/250 REZ Serial number: 68381 Capacity: 40 m³/h Head: 63 m Rotational speed: 2900 rpm Power consumption: 12 kW Industrial design Manufactured in: Western Germany Fgedpfxoz Spapo Aipoi Motor specifications: Manufacturer: Bauknecht Type: 160M Power: 15 kW Voltage: 380 V Current: 29 A Rotational speed: 2935 rpm Frequency: 50 Hz cos φ: 0.90 Protection class: IP44 Insulation class: B Condition: Used pump, in working order. Visible signs of use and storage, including surface corrosion and paint chips. The unit is sold as a complete set: pump and electric motor. Visual condition as shown in the photos. Set weight: approximately 150 kg. Ideal for industrial applications, water, cooling, and circulation systems. The unit can be inspected before purchase.

Condition: used, temperature: 95 °C, input voltage: 400 V, operating pressure: 3 bar, Fröling Turbomatic TMC 110 used wood chip / pellet biomass boiler, supplied with screw conveyor and spring-arm fuel extraction system. Nominal heat output: 110 kW. Water capacity: 320 litres. Maximum operating pressure: 3 bar. Maximum temperature: 95 °C. Electrical connection: 400 V / 50 Hz. Fodpfx Ais Afbqvspsgi Net price: EUR 10,000 including the advertised feeding and fuel extraction equipment. Exact delivery scope and configuration by agreement. Inspection by appointment in Mosonmagyaróvár, Hungary. Loading and transport by arrangement. Installation and commissioning are the buyer’s responsibility.

Condition: used, Year of construction: 2003, Overview This Krones preform feeding system stores preforms in bulk and delivers them, oriented, to the infeed of a stretch blow moulding machine. It was in production until March 2026, feeding a Krones Contiform S24 blow moulder. The preforms are tipped into the buffer silo, carried up by the inclined preform elevator and aligned on the roller sorter, which hands them over in a continuous row to the blow moulder's infeed rail. The access platform gives the operator safe access to the roller sorter. Technical data Fgodpfxez Sr Imo Aipei - Manufacturer: Krones - Machine type: preform feeding system for a stretch blow moulding machine - Operated with: Krones Contiform S24 blow moulder - In production until: March 2026 Scope of Delivery - Preform buffer silo | Krones | stainless steel hopper with access stairs - Preform elevator | Krones | inclined elevator from the silo to the roller sorter - Roller sorter | Krones | orients the preforms and feeds them into the blow moulding machine - Access platform | Krones | steel platform with stairs and railings Condition Used, dismantled and stored. The preform tipper and the electrical control cabinet are not included; the preform tipper visible in one photo is not part of the offer. Availability Available immediately. Location: Germany. Viewing is possible.

Condition: like new (used), Year of construction: 2015, functionality: fully functional, pressure: 0.5 bar, temperature: 110 °C, For sale is a steam boiler manufactured by BOSCH - LOOS, model U-ND 2000. Year of manufacture: 09/2015 Capacity: 750 - 1,500 kg/h. Fedpfx Aio Afpfnepjgi Working pressure: 0.5 bar. Steam temperature: 110°C. Riello gas burner. Complete service documentation. Condition: IDEAL, like NEW. Complete documentation for registration with the UDT (Office of Technical Inspection). Start-up guarantee.

Condition: new, functionality: fully functional, overall weight: 260 kg, volume flow: 65.3 m³/h, power: 22 kW (29.91 HP), GRUNDFOS NKE 40-250/255 stainless steel centrifugal pump – 22 kW – integrated VFD – new/unused New, unused Grundfos industrial centrifugal pump with integrated variable frequency drive. Complete assembly with motor, coupling, coupling guard and steel baseplate. Stainless steel pump casing and impeller, suitable for water transfer and various industrial pumping applications. Technical specifications: Type: NKE 40-250/255 A2F2KE-SBQQE Product number: 97701889 Motor: Grundfos MGE, 22 kW Supply: three-phase 380–480 V, 50/60 Hz Nameplate duty point: 65.3 m³/h at 78 m head Speed at stated duty point: 2,940 rpm Nameplate pressure/temperature rating: 16 bar / 120 °C Stainless steel casing and impeller: EN 1.4408 Fodpfxj Aaw Rhs Aipjgi Shaft seal: BQQE Motor efficiency: IE3, 92.7% Protection rating: IP55; insulation class F Control interface: PUMP I/O, GENI/RS485 Condition: new/unused surplus stock. Supplied as pictured.

Condition: new, Touch - Screen 7” in Color Programming directly via Touch Screen chalk line cutting working according to program 1 pcs pusher for cut off pieces hydraulic saw blade movement Fjdpfxedify Io Aipogi machine according to CE norm brake motor safety & noise protection hood incl. 1pcs HM saw blade saw motor 7,5 kW, 400 V, 50 Hz saw blade DM 500 mm work piece feeder system with toothed belt feed speed 120 m/ min cutting accuracy +/- 0,8 mm cutting capacity up to 100 cuts/ min min work piece length 550 mm min. work piece width 40 mm Option: - additional infeed table - additional out feed table - TCT saw blade DM 500 mm