Used Bobst 102 E for sale (50)

Condition: ready for operation (used), Year of construction: 1994, Max format 103x72 cm min format 40x35 cm max speed 8000 per hour cutting force 250 t Quick lock frame Micrometric Hjdpfx Aex S Hl Rsh Njfb Stripping Unit with Quick lock upper chase and lower chase Tools, Manuals and Accessories Non-stop in feeder + delivery Stream feeder

Year of construction: 2006, condition: excellent (used), Bobst Autoplatine Speria 106 E STANDARD EQUIPMENT MACHINE - Centerline system for quick job changeover. - Electronic sheet travel monitoring system. - Adjustable centering at the stripping station. - Control cabinet air conditioning unit. - Bobst electronic control system C.U.B.E. (Control Unit Bobst Electronic). This microprocessor-based Bobst system allows the operator to easily manage, visualize, and monitor the machine’s various functions and components. - Main motor with frequency inverter control. FEEDER - Pile tray with handle for easy manual lateral alignment during production. - Synchronization device ensuring proper sheet arrival to the front lays when the machine is stopped. - Automatic pile lifting controlled by pressing foot. - Rear pile guides (operator side and opposite operator side). - Adjustable side blowers with Centerline markings. - Suction unit. FEED TABLE - Feed table with anti-static stainless steel covering. - Feed table entrance equipped with lateral ramps. - Four front lays, pairwise adjustable, with front register control. - "Pull" guide (operator side), adjustable with Centerline markings and side register control. - Double sheet detector. - Support plates at platen station entry. - Sheet hold-down mechanism (guides sheets to front lays). - Upper frame with manual lifting device. - Upper transport system for paper, paperboard, and corrugated board. - Transport belts with lateral guides and automatic tensioning system. PLATEN - Gripper reopening device. - Centering and locking for equipment. - Locking the chase to the upper beam. - Cutting force measurement with strain gauge. 1 synthetic supporting plate. 1 upper chase: fixed bottom plate. 1 cutting plate. WASTE STRIPPING STATION - Air-cylinder-driven upper frame lifting. 1 upper pull-out frame (with crossbars and clamps). 1 lower pull-out frame. Hfsdpfexl Talex Ah Nsb DELIVERY - Pile tray. - Front jogger. - Adjustable rear and side joggers with Centerline markings. - Braking brush. - Manual non-stop rack. AVAILABLE EXTRAS B MACHINE 1 B-1 Raised machine base C FEEDER 1 C-4 Manual non-stop device E PLATEN 1 E-5 Compensating plate 1 E-55 Micro-adjustable supporting plate centering F WASTE STRIPPING STATION 1 F-31 Quick-lock device for the upper pull-out frame

Condition: used, Year of construction: 1973, The Bobst SP 1120-E is a punching machine equipped with a stripping unit, designed for efficient and precise punching operations. Manufactured by Bobst in 1973, this model is located in Germany, with pricing available upon request. It features a format of 780 x 1120 mm and can handle sheet sizes ranging from a maximum of 800 x 1120 mm to a minimum of 380 x 450 cm. The machine boasts a running speed of up to 6,000 sheets per hour and a cutting force of up to 300 tons. Additional features include a platform, pallet feeding with a non-stop device, sheet feeding (OS) with double sheet detection, and a centerline. Format: 780x1120 mm Equipment: Die Cutting Machine with Stripping Unit Running speed: Max. 6000 Sheets/Hour Cutting force up to: 300 Tons Platform Pallet Feeder with Non-Stop device Pull guide (OS) with Double Sheet Detector Centerline Refurbished 1980 Feeder with pre-pile device Continuous feed and delivery Hsdpfx Ahov A R I So Njfb 2 cutting chase Solid board: 0.060 Zoll (1.5 mm) Paper: from 0.005 Zoll (90 grams/sq. meter) Max. sheet 44 Zoll x 31 1/2 Zoll (1120 mm x 800 mm) Min. sheet 17 3/4 Zoll x 15 Zoll (450 mm x 380 mm) Corrugated 0.160 Zoll (4 mm)

Year of construction: 1997, condition: excellent (used), functionality: fully functional, machine/vehicle number: 052302303, Bobst Easypress 142, for the format 102x142cm to carry out models, test punching, preparation work for the production machine. excellent condition, year of construction 1997 Hedpfxeuk I Nxo Ah Nefb

Year of construction: 1985, condition: good (used), Bobst SP 130 E Year 1985 Max.size: 920x1300 mm Min.Size: 450x580 mm Hfodoif Ed Dspfx Ah Nsb Max.Speed: 7000 Sh/h Max. cutting force Cutting force: 500 T Centerline Immidiately available.

Condition: good (used), functionality: fully functional, machine/vehicle number: 552410, Year of construction: 1974, Manufacturer: Bobst, Switzerland Model: Autoplatine SP 1420 E – 600 T Type: Die Cutting Machine / Autoplatine Year of manufacture: 1974 Machine No.: 552410 Technical specifications: - Max. sheet size: 1420 x 1020 mm - Min. sheet size: 700 x 500 mm - Speed: up to 4,500 sheets/hour - Power supply: 380 V, 50 Hz Hjdpfew Rb Ezsx Ah Nofb Features: - Robust construction for carton and corrugated board - Automatic platen die cutting - Pile feeder and delivery - Mechanical control with operator panel - Proven Swiss quality

Condition: excellent (used), Year of construction: 1987, Universal non stop Feeder In line pile preparation 4 fron lays Hfedpfxovyn Tts Ah Nsb Pull guide OS 16 INDEPENDENT HEATING ZONES Honeycomb Leteral guiding device for foil Motorized foil tension, air cooling Size 102x72 cm Min size 40x35 cm Speed with hot stamping 5000 per hour max Speed for die cutting 7500 per hour max

Year of construction: 1988, condition: good (used), functionality: fully functional, machine/vehicle number: 0591 009 03, For sale is a Bobst SP 102-CER in good condition. The machine has no defects or maintenance backlog. The electronics have not been modified or altered. Everything is still original. Documentation is complete. We have circuit diagrams and exploded views for both digital and analogue systems. All frames and pins are present to utilize the machine's functions, especially for the stripper, blank separator, and lower stripping station with pins. There is a quick-clamping system so that the stripper, for example, does not need to be secured separately. If interested, additional pictures or videos can be sent. Bobst SP 102 CER Year of manufacture: 1988 Max. format: 1020 x 720 mm Min. format: 400 x 350 mm Max. speed: 8000 sheets/h Max. cutting force: 250 t Paper: min. 80 g/m² Cardboard: max. 2000 g/m² Non-stop feeder Non-stop stacker Side guide Quick-release lock We can assist with disassembly, assembly, and transport. Hfodjwk I Iqopfx Ah Njb Special feature: The machine is raised by approximately 100 mm, eliminating the need for a pit in production! The raised frame can be removed without tools and is not permanently attached to the machine. Please feel free to contact us with any further questions. Best regards

Year of construction: 1987, condition: good (used), Bobst SP1600 E Hfedsr Dfi Ropfx Ah Neb Year 1987 Max. size: 1115 x 1600 mm Min. size: 600 x 850 mm Max. cutting force: 750 T Centerline Non-Stop Chain and all Gripper as new.

Condition: ready for operation (used), Year of construction: 1985, Bobst SP 102 CER - Perfect condition available immediately Year 1985 Max.Size: 1020x720 mm Min.Size: 400x350 mm Max.Speed: 8000 Sh/h Hodpswathhefx Ah Nsfb Max. Cutting force: 250T Paper: min. 80 gr/qm Cardboard: max. 2000 gr/qm Centerline Feeder Non-Stop Autom. Non-Stop with Sheet inserter Side guide Quick Lock system

Year of construction: 1970, condition: good (used), Bobst SP 1650 E Hfodpfsht Rn Iex Ah Njb Max.Size: 1150 x 1650 mm Min.Size: 570 x 850 mm Max.Speed: 4500 Sh/h Year 1970 In good production condition.

Condition: used, An automated die-cutting press in 72 x 102 cm format Equipped with: Max. sheet size: 720 x 1020 mm Min. sheet size: 350 x 400 mm Pressing force: 2.5 MN (250 tons) Feeder and delivery without gripper bands Max. speed: 7,500 sheets/hour Quick-change system Suction head feeder Cutting area Stripping area and waste removal In good condition Hjdswvmgiopfx Ah Nefb

Condition: excellent (used), Year of construction: 2001, Ref: 10900 . 2001 Bobst SP102-BMA Foilmaster Excellent condition! Only 33,000 hours worked! Equipped with: Fully Automatic Feeder Double Sheet Control Centre Line Hot Foil Unit 2 x honeycomb chase 2 x die cutting chase 16 Independent Heating Zones Foil Advance Shafts Automatic Delivery Elevated (High Pile) Hsdpsu Snwmjfx Ah Njfb Specification: Sheet Format Max: 720mm x 1020mm Sheet Format Min: 350mm x 400 mm Working Material Paper/Solid Board: 80-2000gr Corrugated Board: "E" and "B" - max. 4mm Gripper margin: 9-15mm Stamping Format: Max 680mm x 1010mm Max speed: 7,500 p/h

Condition: ready for operation (used), Year of construction: 2006, Bobst SP102-BMA Foilmaster Equipped with: Fully Automatic Feeder Double Sheet Control Centre Line Hot Foil Unit 2 x honeycomb chase 2 x die cutting chase 16 Independent Heating Zones Foil Advance Shafts Hedjwgz Rkjpfx Ah Nofb Automatic Delivery Elevated (High Pile) Specification: Sheet Format Max: 720mm x 1020mm Sheet Format Min: 350mm x 400 mm Working Material Paper/Solid Board: 80-2000gr Corrugated Board: "E" and "B" - max. 4mm Gripper margin: 9-15mm Stamping Format: Max 680mm x 1010mm Max speed: 7,500 p/h

Condition: excellent (used), Year of construction: 1995, FULLY AUTOMATIC INLINE MACHINE FOR FOLDING BOXES BOBST MIDLINE 924 Speed: up to 18000 boxes per hour Nominal machine width: 2400 mm Nominal plate cylinder circumference: 1000 mm Largest printing area: 920 x 2400 mm Maximum corrugated board thickness: 10 mm Standard slitting blade thickness: 6.35 mm Average connected load: 200 kVA The line consists of: 1) Feeder Serco 2) Main machine – Flexographic printing machine midline 924 Colors: 3 // Automatic washing device 3) Slotter (Riller) Longitudinal slots // Tool is installed in the machine. Hfjdpsxrfraofx Ah Neb 4) Punching module (e.g. for punching handles) 5) Breakout vibrating station (Material – punching residues are disposed of using compressed air) 6) Glue station Robotech 7) Folding unit 8) Counting station & display The specified number of cartons will be bundled - up to here main unit - 9) Package binder / bundling machine CEMA Fully automatic strapping machine with weld seal and press for 5 mm plastic strapping, for binding corrugated cardboard bundles in the direction of travel of the flute 10) Palletizing system Martin Automatic layer formation. Roller tables receive the packages from the bundling machine. The packages are positioned using the ball bearing table according to their arrangement in the preselected position. If necessary, the package can be rotated 90° or 180° simultaneously with the lateral movement.

Condition: ready for operation (used), Year of construction: 1989, MACHINE: BOBST Domino 85-M Manufacturer: BOBST SA Model number: Domino 85-M Machine type: Folder-gluer Year manufactured: 1989 Machine Format: 850 x 800mm Technical Specifications: Convertible stock Solid up to 700 g/m2 Corrug. up to B flute Thickness 15 mm Sizes: standard boxes (blanks open) Width max 850 mm Width min 56 mm Length max 800 mm Length min 60 mm Drive System Inching speed 8 m/min Operating speed 20 - 400 m/min Crash lock bottom device Special version for 4/6 corner gluing HHS gluing system with 3 guns N. 2 gluing points disc system Hsdpfxjx S Uuye Ah Nofb Belt pressing system delivery Main motor 21 kW Dimensions Length 14120 Width 2200 mm Weight 7000 - 10000 kg

Condition: good (used), Year of construction: 2004, Folding Carton Gluing Machine Formats: max. 1000 x 600 mm min. 126 x 60 mm - Straight-line version for longitudinal seam (straight-line) cartons, crash-lock bottom cartons, and 4-corner cartons - Feeder with vibration - Pre-breaking units - Left-side lower disc gluing system - Folding modules - Crash-lock (patent bottom) module - Electronic upper gluing system KAS C-800-Compact - 4 glue nozzles - Up to 5 gluing points - Unit with 2 forming stations - Pneumatically operated press belt and delivery section Hedpex R Thiofx Ah Nofb - CUBE central control system with display

Condition: used, Year of construction: 2003, REF 2326 BOBST MEDIA 100 III A2 Folder Gluer 2003 No. 034114107 /- 50251 working hours Max. working width: 1000 mm, min. 126 mm, Max. form length: 600 mm Cardboard: 100 – 600 g/m2 Speed up to 300 m/min Hfodpfxox Rhdxs Ah Njb Straight line gluing, Crash lock bottom device, 4-point gluing, Electronic overhead glue unit HHS 8-channel 4 glue guns Lower disc cold glue application Electronic back folding with servos, CUBE control, Barcode reader, glue control Left and right prefolder, kicker, counter, Handypack delivery from 1997

Condition: excellent (used), Year of construction: 2002, 1) Bobst Dynaload prefeeder year 1998 2) Bobst Flexo 160 year 2002 n. 5 colors, Vacuum transport, rubber roller Hfedpfx Aev Nywvjh Njb Bobst CUBE 3) Bobst SPO 160 A Matic year 2002 Introduction of suction cup Center Line II Stripping station with motorized Quick Lock tool clamping Batch delivery with gripper trim extraction Bobst CUBE 4) Castaldini Breaker year 2007

Condition: good (used), Year of construction: 1996, functionality: fully functional, Bobst Domino 145 II Matic Year 1996 Longitudinal seam Automatic bottom (3-point) 4/6-point gluing Cold glue system by Valco, year 2019, with 5 nozzles Hotmelt glue system by hhs-Xmelt, year 2017, with 3 nozzles Handle dispenser CoroPack 125 Bobst included, year 1996 – electronics are new. Hedpfex Aryfox Ah Nefb

Condition: used, Year of construction: 1990, functionality: fully functional, Offer Title: Bobst Domino 100 Folding Machine Manufacturer: Bobst Model: Domino 100 Technical Condition: Good 3-point gluing Features: - Cold glue system - Lower disc: 5 mm Hfodpfx Ajx An Dajh Neb - Two (2) glue guns - Two (2) main gauges - Valco channel control with high-pressure pump - Remote control for the operator

Year of construction: 1968, condition: ready for operation (used), AUTOPLATEN BOBST SP 1260 E / AUTOMATIC FLATBED DIE-CUTTER STRIPPING / Year Of Production: 1968 / Max. Sheet Size: 1.260 x 920 mm / Min. Sheet Size: 500 x 350 mm / Maximum Speed: 5.000 Sheets Per Hour / Max. Solid Board Thickness: 1,5 mm / Max. Corrugated Board Thickness: 3 mm / Maximum Cutting Pressure: 500 Tons / Weight: 19 Tons / Main Dimensions: 6.075 x 2.840 x 2.200 mm Hodpfjx R R R Uox Ah Nefb

Condition: good (used), Year of construction: 2000, operating hours: 23,000 h, Bobst SP 142 CER II Hjdpfx Ahexxypyo Nefb

Condition: used, Year of construction: 1993, functionality: fully functional, Speed: up to 8,000 sheets per hour Format (cm): max. 102 x 72 // min. 40 x 35 Hedpfxjx Anvpj Ah Nsfb Die-cutting force: up to 2.5 MN (250 t) Operating hours: approx. 38,000 hours Equipment / further details: Stripping system (stripping station) with centering frame Tools

Condition: excellent (used), Year of construction: 2014, Para Prefeeder, year 2014 Bobst Expert Line 820 4 t flexo printing units from the top equipped with doctor blade chambers Vacuum conveyor belt between the printing units Double-shaft slotter Rotary die-cutter Vacuum folder Top-loading counter ejector Cube Bobst Palletizer, year 2014 Hfjdpfx Aexx U Ukeh Neb