Used Board Turning for sale (14,434)

Condition: good (used), Year of construction: 2012, functionality: fully functional, Description follows Gtedpfjx A Hdfox Agbst

Condition: good (used), Year of construction: 2008, functionality: fully functional, There is 5 pieces for sale, (2010 - 2008 - 2004 - 2002 - 2001) All of them has C-Axis. All of them has Automatic Part Loader. All of them has Live tools of different amounts. (Please ask for exact amount) We can send videos of the machines. X-Axis Travel : 245mm Y-Axis Travel : +-35mm Z-Axis Travel : 240mm Gtsdpfxjx Rw Its Agbet Spindle Speed Range: 60-6000 1/MIN Max. Bar Diameter on Main Spindle 70mm Max. Bar Diameter on Sub Spindle 80mm Spindle inner diameter 46mm

Condition: excellent (used), Year of construction: 2013, operating hours: 40,000 h, functionality: fully functional, spindle motor power: 6,700 W, turning length: 305 mm, turning diameter over cross slide: 32 mm, spindle speed (max.): 8,000 rpm, spindle speed (min.): 1 rpm, turning diameter: 32 mm, spindle bore: 32 mm, overall weight: 7,350 kg, type of input current: three-phase, bar passage: 32 mm, feed length X-axis: 140 mm, feed length Y-axis: 65 mm, feed length Z-axis: 305 mm, Equipment: rotational speed infinitely variable, CNC Sliding Headstock Automatic Lathe Manufacturer: Traub Model: TNL 32 T-9 Control System: TX8i-s Year of Manufacture: 2013 Location: Sweden, still in production Availability: From January / February 2026 Operating Hours: approx. 40,000 h Technical Data Spindle through-hole (mm): 32 Max. spindle speed (rpm): 8,000 Power (100% / 25% duty cycle) (kW): 6.7 / 10.7 Torque (100% / 40% duty cycle) (Nm): 21 / 32 C-axis resolution (degrees): 0.001 Z axis travel (mm): 305 / 127 (sliding headstock / fixed headstock) Rapid traverse Z (m/min): 20 Godpfx Aex Rwkuegbstt Subspindle Spindle through-hole (mm): 30 Max. spindle speed (rpm): 6,400 Power (100% / 25% duty cycle) (kW): 3.7 / 5.5 Torque (100% / 40% duty cycle) (Nm): 29.4 / 43.7 C-axis resolution (degrees): 0.001 X travel, rapid traverse (mm / m/min): 140 / 20 Z travel, rapid traverse (mm / m/min): 300 / 20 Tool Carrier 1 Configurable as turret Number of stations: 10 Max. speed (rpm): 12,000 Max. power (kW): 3.4 X travel, rapid traverse (mm / m/min): 140 / 20 Y travel, rapid traverse (mm / m/min): -40/+25 / 20 Z travel, rapid traverse (mm / m/min): 300 / 20 Tool Carrier 2 Configurable as turret Number of stations: 10 Max. speed (rpm): 12,000 Max. power (kW): 3.4 X travel, rapid traverse (mm / m/min): 140 / 20 Y travel, rapid traverse (mm / m/min): -25/+40 / 20 Z travel, rapid traverse (mm / m/min): 320 / 20 Dimensions, Weight, Electrical Connection Weight: 7,350 kg (depending on configuration) Connected load (kW): 28 Additional Equipment - Chip conveyor - External tank with paper band filtration system - Bar feeder: FMB Turbo 3-36, 4.2 m bar length - Guide bushes, collets, magazine liners (?) - Tool holders, driven and static - Documentation - High-pressure coolant system - Fire extinguishing system + Kraft & Bauer fire extinguishing system control The operator panel and hard drive were replaced in spring 2025 (approx. €24,000 incl. service costs). New drive belts for the main spindle and driven tools were recently changed. Service carried out as scheduled. Between 2019 and 2020, several extremely costly refurbishments of spindles and drive units were carried out, including new bearings and a new motor. At 27,000 operating hours. All information has been provided to the best of our knowledge and belief, but we reserve the right to make errors. Subject to prior sale. All prices are net, plus statutory VAT, ex works.

Condition: used, Year of construction: 2008, turning diameter 210 / 350 mm turning length 400 mm control Fanuc 0i-TC swing diameter 500 mm travel -x axis 195 mm travel -z axis 430 mm spindle speed: 3500 1/min spindle bore 75 mm bar diameter 51 mm C-Axis 0,001 ° turret head 12 Pos. taper in tailstock-quill MK 4 tailstock travel 100 mm diameter of quill 80 mm rapid traverse X-axis 30 m/min rapid traverse Z-axis 30 m/min drive capacity - spindle motor 11 / 15 kW voltage 400 V total power requirement 30 kVA weight of the machine ca. 4,2 t dimensions of the machine ca. 2,70 x 1,90 x 2,10 m chip conveyor 2,80 x 0,60 x 1,30 m Transformer 0,60 x 0,45 x 0,55 m - Serial-No.: M015356K2F - Machine ON: 14.494 h - control: FANUC Oi-TC - Machine with C-axis and turret for life tools (1x radial + 1x axial in the accessories) Godpfx Aettckmjgbstt - Tool meeasuring arm - Parts collecting tray - Collet chuck - 3-jaw chuck Samchully Ø 250 mm - Open center clamping cylinder - Automatic sliding door - chip conveyor

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, spindle motor power: 3,700 W, turning length: 205 mm, spindle speed (max.): 10,000 rpm, turning diameter: 12 mm, rotational speed (max.): 10,000 rpm, feed length X-axis: 126 mm, feed length Y-axis: 303 mm, feed length Z-axis: 205 mm, rapid traverse X-axis: 32 m/min, rapid traverse Y-axis: 32 m/min, rapid traverse Z-axis: 32 m/min, travel distance X-axis: 126 mm, travel distance Y-axis: 303 mm, travel distance Z-axis: 205 mm, Equipment: documentation/manual, Citizen L20E-IX Gedpjx N H A Djfx Agbstt Year: 2011 Control: Mitsubishi M70 Number of servo axes: 5 X1/Z1/Y1/X2/Z2 Number of C-axes: 2 (main and sub-spindle) Number of driven tool stations: 11 (7x vertical holders (4 cross/3 front) / 4x rear processing) FMB Turbo 3-26 bar feeder Stainless steel coolant lines Parts conveyor The machine is in very good condition, with low operating hours !!!Immediately available!!!

Condition: used, Year of construction: 2007, functionality: fully functional, CNC Control: Fanuc 18i-TB Travel X-axis (mm): 157.5 Travel Y-axis (mm): 35 Travel Z-axis (mm): 464.8 C-axis: 360º (0.001º increments) Turning length (mm): 399 Max. turning diameter (mm): ø190 Distance between spindle noses (mm): 750 Spindle bore (mm): 65 Upper turret: Number of tool stations: 12 Max. speed of driven tools (rpm): 6,000 Driven tool power (kW): 5.5 / 3.7 Lower turret: Number of tool stations: 12 Max. speed of driven tools (rpm): 6,000 Driven tool power (kW): 5.5 / 3.7 Main spindle: Max. spindle speed (rpm): 5,000 Spindle drive power (kW): 15 / 11 Sub spindle: Max. spindle speed (rpm): 4,500 Spindle drive power (kW): 11 / 7.5 Equipment: Parts catcher Bar feeder: LNS HYDROBAR SPRINT Rated power (kVA): 67.2 Gtodpfx Asx Rvivjgbst Basic machine: Dimensions / Weight Length (mm): 3,675 Width (mm): 2,258 Height (mm): 1,885 Weight (kg): 9,000

Condition: used, Year of construction: 1987, operating hours: 80,678 h, functionality: fully functional, Description follows Gjdpfx Asx A Hl Ajgbett

Condition: excellent (used), functionality: fully functional, VDI40 tool holders for external machining. The tool holders have been inspected and are in excellent, almost like-new condition, featuring high quality from various renowned manufacturers. The following prices apply for a minimum purchase of 4 units: Order No.: 435_C1 → Stock: 2 units; Price: €55.00/unit Order No.: 430_C2 → Stock: 3 units; Price: €54.00/unit Order No.: 432_B4 → Stock: 2 units; Price: €55.00/unit Order No.: 433_B4 → Stock: 2 units; Price: €56.00/unit Unit price for single items: €65.00 net B3 with right-hand rotation; B4 with left-hand rotation C1 with right-hand rotation; C2 with left-hand rotation ----- Short reverse VDI radial tool holder. Tool holders for mounting OD turning tools Gtedpfswa Thbjx Agbet in standard orientation, i.e., with Hartmell indexable inserts facing upwards: C1 with right-hand rotation; C2 with left-hand rotation Shipping costs: on request ----- Dimensions: D = 83 mm d-2= 83/40 mm (45.52) H= 32.5 mm L1= 75 L2= 22 l-4= ----- Further VDI40 holders in our other offers. For example, VDI40 type E2 For drilling tools with cylindrical shank with internal and external coolant supply Surface hardened, blackened, and ground.

Condition: good (used), Year of construction: 1989, operating hours: 64,136 h, Centre height: 350 mm Turning length: 1000 mm Max. swing diameter over bed cover: 600 mm Max. swing diameter over cross slide: 360 mm Spindle bore: 107 mm Speed range: 16 – 3150 rpm Feed range longitudinal & face: 0.5 – 5000 mm/min Rapid traverse longitudinal & face: 9 m/min Main drive: 30 kW Dimensions of machine with chip conveyor (L x W x H): 5400 x 2200 x 2000 mm Weight: 6400 kg Accessories / Special features: • CNC control GILDEMEISTER EPL 2 with TFT display General description: CNC manual input control system with program entry via function and numeric keypad. All information is entered in dialogue with the screen. Integrated menu technology with plain text display of all functions. Operator keypad, display, and electronic handwheel located within a separate chip guard housing. The EPL control offers the following capabilities: • Direct interactive program entry and editing by the operator through the EPL control without manual technological preparation • NC programs in ISO/EIA format can be entered, output, or manually keyed in via the RS 232 serial interface Gedpfx Aovr Eh Eogbott Machining cycles: • Removal cycles for longitudinal, facing, and contour turning, including with allowance • Thread cutting • Undercuts as per DIN 509-Form E and F and DIN 76; grind stock programmable • Axial and radial grooves as per DIN 471 and 472, including bottom finishing • 90° radii and 45° chamfers • Automatic cutter radius compensation for cycles, undercut, groove, radius, chamfer Programming: • Block-orientated, metric/inch, diameter for absolute entry, radius for incremental entry • Full circle programming, subroutine technology, hide levels for program sections, zero point offset, mode selection via menu Program entry and output: • Interactive via guided menu or direct in dialogue • Hydraulic 3-jaw chuck Ø 315 mm with through spindle bore Ø 80 mm • Hinged chip conveyor • 12-position tool turret VDI 40, 6 standard stations + 6 driven tool stations • Coolant system • RS 232 interface • Electronic handwheel • Electric foot switch for 3-jaw chuck and tailstock quill • Lighting • 12 various standard toolholders (to be finalized on site) Overhauled servo drive for main spindle, 06/2025 Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Condition: good (used), Year of construction: 2004, turning length: 2,000 mm, Model: E-650H Control: Mazatrol 640M Pro Year: 2004 Distance Between Centres: 2000mm Swing Over Bed: 905mm Machine With: C Axis Y Axis Gtodpfx Agsxvyq Eobst Live Tooling/Milling B Axis 800mm Power Chuck Manual Steady 375mm Open Steady 600mm Air Filer Mist

Condition: used, Year of construction: 2006, Technical details: swing diameter: 200 mm weight of the machine ca.: 15 t Distance between tips: 832,5 mm turning length: 380 mm with chip conveyor and belt filter press, infeed and outfeed belt 2 x 12-position revolvers Gjdpoquy Iuefx Agbett *

Condition: used, Year of construction: 2005, functionality: fully functional, CNC Control: Fanuc 18i-TB Gedpfxsx Rvipo Agbott Travel X-axis (mm): 157.5 Travel Y-axis (mm): 35 Travel Z-axis (mm): 464.8 C-axis: 360º (0.001º increment) Turning length (mm): 399 Max. turning diameter (mm): ø 190 Distance between spindle noses (mm): 750 Bar working capacity (mm): 52 Upper turret Number of tool stations: 12 Max. speed driven tools (rpm): 6,000 Driven tools power (kW): 5.5 / 3.7 Lower turret Number of tool stations: 12 Max. speed driven tools (rpm): 6,000 Driven tools power (kW): 5.5 / 3.7 Main spindle Max. spindle speed (rpm): 5,000 Spindle drive power (kW): 15 / 11 Sub spindle Max. spindle speed (rpm): 4,500 Spindle drive power (kW): 11 / 7.5 Equipment Parts catcher Bar feeder LNS HYDROBAR SPRINT Nominal kVA: 67.2 Base machine: Dimensions / Weight Length (mm): 3,675 Width (mm): 2,258 Height (mm): 1,885 Weight (kg): 9,000

Condition: used, Year of construction: 2010, functionality: unexamined, feed length X-axis: 250 mm, feed length Z-axis: 500 mm, power: 40 kW (54.38 HP), spindle diameter: 300 mm, EMAG VSC 7 ( YEAR OF MANUFACTURING - 2010 ) - 01 NO & EMAG VL 05 ( YEAR OF MANUFACTURING - 2012 ) - 01 NO Gtedpex Rawdefx Agbet

Condition: good (used), Year of construction: 2008, Year: 2008 FANUC 0i Series Control Swing over saddle: 500 mm Bar capacity: 76 mm Spindle size: 315 mm (12″) Maximum turning diameter: 410 mm Maximum turning length: 1030 mm Swing diameter: 630 mm Tailstock quill diameter: 100 mm Tailstock quill stroke: 100 mm Taper MT #5 Turret positions: 12 stations Driven turret speed: 5000 rpm Rapid traverse XZ: 20 x 24 m/min Spindle motor power: 22 kW Spindle nose: A2 #8 Spindle speed: 3500 rpm Boring bar holder diameter: 50 mm Tool dimensions: 25 x 25 mm X-axis travel: 242 mm Z-axis travel: 1100 mm Machine dimensions: 3418 x 1670 x 1735 mm Gtsdpfxjx Rrf Te Agbet Machine weight: 4700 kg

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, OKUMA V-Turn LVT 400 CNC Vertical Turning Lathe (2 machine cell) Model: LVT 400 Control: OKUMA OSP 1000L Year: 2006 Gedsxwy S Eepfx Agbjtt 12 – tool turrets Hi – Power 60 Bar High Pressure coolant Swarf Conveyor Work Measurement Carousel System linking with both machines with turnover station

Condition: used, Year of construction: 2009, Technical details: turning diameter: 1000 mm swing diameter: 1000 mm Machine type: Vertical lathe Manufacturer: Hessapp Type: DV 62 Serial no.: 14.2308 Working range of the spindle Largest diameter 1000 mm Largest swing diameter 1000 mm Cross slide travel Stroke of the vertical slide 900 mm Stroke of the horizontal slide 1810 mm Total travel 2315 mm Turning spindle Spindle head with centering cone according to DIN 55021 A15 Spindle diameter in the front bearing 203 mm Main drive Via a controlled asynchronous motor and gear transmission with range switching. Gtodpfxot Rmdzo Agbet Spindle speeds Speed ??range I: 5 - 350 rpm. Speed ??range II: 30 - 1000 rpm. Travel speed X/Z axis: 10 m/min. W1 axis: 8 rpm No C-Axis *

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, MAIN SPINDLE: Spindle nose: A2-8 Main spindle drive power: 18.5 kW Max. main spindle speed: 4,000 rpm Max. spindle bore: 80 mm Max. machinable diameter: 366 mm C-axis 0.001 degree TURRET: Godpfx Aox Rvgzegbstt Number of positions: 12 pcs. Number of driven tools: 12 pcs. Travel X/Z axis: 280 / 785 mm Travel Y axis: +/- 50 mm Max. speed driven tools: 6,000 rpm Power driven tools: 5.5 kW TAILSTOCK: Taper: MT5 Distance between centers: 705 mm ELECTRICAL SUPPLY: Total drive: 39 kVA WEIGHT AND DIMENSIONS: Space requirements: 3,800 x 2,143 mm Machine height: 2,232 mm Machine weight: 6,100 kg ACCESSORIES: Control: MORI MSX-850 II Tool measuring device Parts removal Chip conveyor Coolant tank Tool holders and driven tools

Condition: used, Year of construction: 2001, Technical details: turning diameter: 33 mm turning length: 330 mm control: 840 total power requirement: 20 kW weight of the machine ca.: 6 t dimensions of the machine ca.: 3850,2000,2100 m 17 axes 3 revolvers with the powered tools 1 gantry with the driven tools Main and counter spindle with C axes Barfeeder Machine On-time 58,133 hours * Gtjdpfjw D Hh Asx Agbet

Condition: used, Year of construction: 2006, Technical details: turning diameter: 250 mm Godpfxexc Idge Agbstt swing diameter: 260 mm Available from October 10, 2025 The system consists of two individual systems that are linked together. No driven tools! *

Condition: used, Year of construction: 2013, Technical details: turning diameter: 250 mm swing diameter: 250 mm turning height: 200 mm total power requirement: 37,7 kW chuck diameter: 315 mm spindle speed max.: 5500 1/min Gsdsvxuc Espfx Agbett travel -x axis: 625 mm travel -y axis: +100/-80 mm travel -z axis: 250 mm worktool system: VDI 30+40 weight of the machine ca.: 8 t The synchronous spindle is powered with 37.7 kW of power, a torque of 300 Nm and a maximum speed of 5,500 rpm. Typical components are ball cages, ball hubs, gear wheels, sliding sleeves, pump wheels, flanges, synchronizer rings, bearing rings and pivot pins. The machine bed is made of Hydropol, a mixture of special concrete and steel, which ensures the greatest smoothness and precision even with larger components and powerful machining. *

Condition: used, Year of construction: 2015, Technical details: Gjdpfx Agoq Sc Huobjtt turning diameter: 200 mm swing diameter: 260 mm turning height: 60 mm

Condition: used, Year of construction: 1999, Lathe with 4 tools only for 3-cylinder crank shaft * Gtjdpfow Dufiox Agbjt

Condition: used, Year of construction: 2003, Technical details: turning diameter: 270 mm weight of the machine ca.: 6,5 t max. swing diameter: 590 mm with automatic loading and unloading system, chip conveyor Godpfxex Dlhle Agbott G300 with "spindle bore clamping capacity 90mm" in tailstock version The machine has no driven tools. The information in the circuit diagram refers to the rotary drive for indexing the turret, not to driven tools. *

Condition: used, Year of construction: 2016, Technical details: total power requirement: 55 kW Gedjxy I Exopfx Agbjtt weight of the machine ca.: 13 t We offer you 21 x EMAG complete € 50.000 free loaded new EMAG is around € 500.000 *

Condition: used, Year of construction: 2002, Technical details: Gtodpjr Dwpmjfx Agbst turning diameter: 200 mm turning height: 120 mm weight of the machine ca.: 18 t Available from 01.08.2024 *