Used Black Müller Tipper for sale (469)

Year of construction: 1998, condition: ready for operation (used), A hydraulic double-column drawing press, which has only been used as a die tryout press, is available. Press force: 2500kN, stroke: 400mm, max. installation height: 600mm, table dimensions X/Y: 1250mm/800mm, column clearance: 1350mm, side passage: 640mm, table height: 800mm. Machine dimensions X/Y/Z: approx. 5700mm/3600mm/2800mm, weight: approx. 36000kg. The machine received a new screen, a hydraulic pump, a Sitema fall protection system, a press cylinder seal kit and an oil change in the last 12 years. Documentation available. An on-site inspection is possible. Fedpfjy Hk S Rex Ah Negc

Year of construction: 1989, condition: used, A used CNC- lathe in good condition with NUM- CNC control Chip conveyor, coolant unit, hydraulic power chuck, jaws and tool holders turning diameter over bed 360mm Turning diameter over support 260mm Fgsdpsflhcmsfx Ah Nsc Max. turning length 625mm Spindle speed 3500 rpm spindle passage 42mm Tech. Data and dimensions: Errors excepted. Further tech. data see pdf.- document

Condition: used, axle configuration: 2 axles, total width: 25,000 mm, total height: 40,000 mm, Year of construction: 2014, Equipment: ABS, For inquiries regarding the vehicle, Mr. Seidel will assist you (by telephone). MÜLLER MITTELTAL SF32BM/BT Concrete Mixer Semi-Trailer Superstructure: Liebherr HTM 1004 10m³, BPW axles, drum brakes, spring-loaded brakes, Wabco ABS, 1st axle liftable, air suspension, permissible total weight: 32,000 kg, unladen weight: 6,510 kg, payload: 25,490 kg, tire tread depth: 1st axle 14-15mm, 2nd axle 10mm Upon request, we can provide you with a leasing or financing offer. Mr. Seidel (tel.) is happy to assist you. Fedpfx Aoyfu Sdjh Negc Further information can be found on our homepage. ... Subject to errors, changes, and prior sale!!! = Further Information = GVW: 32,000 kg Please contact Tobias Ebert for further information.

Condition: good (used), functionality: fully functional, Maximum size: 360 x 310 mm Minimum: 140 x 100 mm Book block thickness: max. 60 mm, min. 3 mm Cover size: max. 642 mm, min. 203 mm Speed: up to 18,000 cycles/hour Collating machine: • 18 stations • 18 Feeder 3681 • 3714 Reject module Controls: • Misfeed and double sheet detection • 2 jogging elements Perfect binder: • Command unit • 35 clamps • Clamp spacing: 18" • Infeed channel with vibrator • Jogging station • Nipping station • Milling and roughening station • Double combined spine processing station • Unit for spine gluing with hotmelt • Spine gluing unit • Hotmelt side gluing unit • Gluing system • 2 pre-melters • SF-Stream cover feeder • Cover scoring: 2 to 6 lines Fsdju Eubxspfx Ah Njgc • Delivery unit Standard accessories: • 1 set of operating manuals • Condition: Clean, in very good, fully functional condition • Availability: Immediately

Condition: like new (used), Year of construction: 2023, functionality: fully functional, machine/vehicle number: 10024150, Sewing machine Muller Martini Ventura MC-200, Machine speed* Mechanical of 18 to 200 cycles/min, max. 12 000 cycles/h, min. signature length 120 mm, max. signature length 510 mm, min. signature width 75 mm, max. signature width 320 mm, max. signature thickness 4 mm, Lap opening min. 8 mm, low or high folio lap, Stitches Number of stitches standard 13, staggered 14, Stitch length 16.5 mm with/without blind stitch possible for all stitch types Sewing machine Muller Martini MC 200 Fgsdpfxex Rywks Ah Noc

Condition: used, Year of construction: 1998, Stream feeders Fedpfjtq Nnxjx Ah Nsgc Müller Martini 3736 Year: 1997/1988 Description: - Stream feeders: 2 x

Condition: used, Year of construction: 1973, pressure 1000 t distance between columns 4150 mm stroke 1200 mm distance table/blankh.,max. stroke up,adjustm. up 2100 mm table surface area 4000 x 2200 mm die-cushion pressure inside the table 360 t stroke of drawing cushion in table 300 mm Fodeyn R Elopfx Ah Njgc die-cushion pressure in pusher 100 t stroke of drawing cushion in pusher 150 mm ram surface 4000 x 2200 mm column travel -side 1300 mm die-cushion inside the table hydraulic, controlled die-cushion in pusher hydraulic, controlled Cut Shock absorption hydraulic weight of the machine ca. 280 t The machine was overtaken 1999.

Condition: used, Year of construction: 1972, pressure 800 t distance between columns 3160 mm stroke 1100 mm Fgodpfx Ahjyn R Efj Njc distance table/blankh.,max. stroke up,adjustm. up 1900 mm table surface area 3100 x 1900 mm die-cushion pressure inside the table 300 t stroke of drawing cushion in table 400 mm die-cushion pressure in pusher 80 t stroke of drawing cushion in table 150 mm ram surface 3100 x 1900 mm die-cushion in pusher hydraulic, controlled die-cushion inside the table hydraulic, controlled

Condition: used, Year of construction: 1973, pressure 1000 t distance between columns 4150 mm stroke 1200 mm distance table/blankh.,max. stroke up,adjustm. up 2100 mm Fjdpfx Ajyn R D Ueh Njgc table surface area 4000 x 2200 mm die-cushion pressure inside the table 360 t stroke of drawing cushion in table 300 mm die-cushion pressure in pusher 100 t stroke of drawing cushion in pusher 150 mm ram surface 4000 x 2200 mm column travel -side 1300 mm die-cushion inside the table hydraulic, controlled die-cushion in pusher hydraulic, controlled Cut Shock absorption hydraulic weight of the machine ca. 280 t The machine was overtaken 1999.

Condition: used, Year of construction: 1974, pressure 600 t distance between columns 2600 mm stroke 900 mm distance table/blankh.,max. stroke up,adjustm. up 1600 mm table surface area 2500 x 1730 mm die-cushion pressure inside the table 250 t stroke of drawing cushion in table 400 mm Fsdpfx Ahoyn R D Io Negc die-cushion pressure in pusher 63 t stroke of drawing cushion in pusher 150 mm ram surface 2500 x 1730 mm column travel -side 1100 mm die-cushion inside the table hydraulic, controlled die-cushion in pusher hydraulic, controlled overhauled in 2005

Condition: used, Year of construction: 1974, pressure 600 t distance between columns 2600 mm stroke 900 mm distance table/blankh.,max. stroke up,adjustm. up 1600 mm table surface area 2500 x 1730 mm Fgsdpfxsyn R Dze Ah Njc die-cushion pressure inside the table 250 t stroke of drawing cushion in table 400 mm die-cushion pressure in pusher 63 t stroke of drawing cushion in pusher 150 mm ram surface 2500 x 1730 mm column travel -side 1100 mm die-cushion inside the table hydraulic, controlled die-cushion in pusher hydraulic, controlled overhauled in 2005

Condition: used, Year of construction: 1974, pressure 600 t distance between columns 2600 mm stroke 900 mm distance table/blankh.,max. stroke up,adjustm. up 1600 mm table surface area 2500 x 1730 mm die-cushion pressure inside the table 250 t stroke of drawing cushion in table 400 mm die-cushion pressure in pusher 63 t stroke of drawing cushion in pusher 150 mm Fgjdpfx Ajyn R Dush Noc ram surface 2500 x 1730 mm column travel -side 1100 mm die-cushion inside the table hydraulic, controlled die-cushion in pusher hydraulic, controlled overhauled in 2005

Condition: used, Year of construction: 1973, pressure 1000 t distance between columns 4150 mm stroke 1200 mm distance table/blankh.,max. stroke up,adjustm. up 2100 mm table surface area 4000 x 2200 mm Fgedpfx Aheynmm Se Njc die-cushion pressure inside the table 360 t stroke of drawing cushion in table 300 mm die-cushion pressure in pusher 100 t stroke of drawing cushion in pusher 150 mm ram surface 4000 x 2200 mm column travel -side 1300 mm die-cushion inside the table hydraulic, controlled die-cushion in pusher hydraulic, controlled Cut Shock absorption hydraulic Control Siemens S7 height over floor 7,7 m total power requirement 300 kW weight of the machine ca. 280 t dimensions of the machine ca. 5,75 x 4,3 x 9,55 m Year of construction 1973 Modernization 2005 with oil-hydraulic drive, hydraulically controlled drawing cushion in the table and Ram, hydraulic cutting impact damping stored dismantled - short video available from the seller before dismantling

Condition: used, Year of construction: 1972, pressure 800 t distance between columns 3160 mm Fsdpfxeynmmxs Ah Nogc stroke 1100 mm control Siemens S5 distance table/blankh.,max. stroke up,adjustm. up 1900 mm table surface area 3100 x 1900 mm die-cushion pressure inside the table 300 t stroke of drawing cushion in table 400 mm die-cushion pressure in pusher 80 t stroke of drawing cushion in table 150 mm ram surface 3100 x 1900 mm die-cushion in pusher hydraulic, controlled die-cushion inside the table hydraulic, controlled total power requirement 200 kW weight of the machine ca. 150 t dimensions of the machine ca. 4,95 x 3,3 x 10,2 m

Condition: used, Year of construction: 1972, pressure 800 t distance between columns 3160 mm stroke 1100 mm control Siemens S5 distance table/blankh.,max. stroke up,adjustm. up 1900 mm table surface area 3100 x 1900 mm die-cushion pressure inside the table 300 t stroke of drawing cushion in table 400 mm die-cushion pressure in pusher 80 t stroke of drawing cushion in table 150 mm ram surface 3100 x 1900 mm die-cushion in pusher hydraulic, controlled die-cushion inside the table hydraulic, controlled total power requirement 200 kW Fgjdpfx Aoynmmroh Nec weight of the machine ca. 150 t dimensions of the machine ca. 4,95 x 3,3 x 10,2 m

Condition: used, Year of construction: 1972, pressure 800 t distance between columns 3160 mm stroke 1100 mm control Siemens S5 distance table/blankh.,max. stroke up,adjustm. up 1900 mm table surface area 3100 x 1900 mm die-cushion pressure inside the table 300 t stroke of drawing cushion in table 400 mm die-cushion pressure in pusher 80 t stroke of drawing cushion in table 150 mm ram surface 3100 x 1900 mm Fjdpfx Ahsynbdfs Njgc die-cushion in pusher hydraulic, controlled die-cushion inside the table hydraulic, controlled total power requirement 200 kW weight of the machine ca. 150 t dimensions of the machine ca. 4,95 x 3,3 x 10,2 m

Condition: used, Year of construction: 1972, pressure 800 t distance between columns 3160 mm stroke 1100 mm control Siemens S5 Fsdpfx Asynbc Ijh Nsgc distance table/blankh.,max. stroke up,adjustm. up 1900 mm table surface area 3100 x 1900 mm die-cushion pressure inside the table 300 t stroke of drawing cushion in table 400 mm die-cushion pressure in pusher 80 t stroke of drawing cushion in table 150 mm ram surface 3100 x 1900 mm die-cushion in pusher hydraulic, controlled die-cushion inside the table hydraulic, controlled total power requirement 200 kW weight of the machine ca. 150 t dimensions of the machine ca. 4,95 x 3,3 x 10,2 m

Year of construction: 2022, condition: new, bearing diameter 120 mm motor Synchronmotor Nominal turning speed 3000 1/min Maximum turning speed 4000 1/min Torque 76,4 Nm current 38 A Unused grinding spindle for Höfler Rapid 1250 Fedjua Ituspfx Ah Negc

Condition: good (used), Year of construction: 2016, Ref:11076 . 2016 Muller Martini SIGMA Three Knife Trimmer Fgedpfxeyw Hwde Ah Nsc On demand trimmer for digital dooks finishing Features: Designed for the finishing of both offset- and digitally-produced books in a one-off, short-, or large-run workflow. Fully-automated, one-off book 3-knife trimmer. Ultra-efficient digital book trimming system with zero makeready for optimal one-off book production. Workflow can be consolidated and efficiently processed through the SigmaTrimmer work center with minimal production planning effort & considerable labour savings. Bound, untrimmed books of varying sizes and thickness can be fed into the SigmaTrimmer continuously, without stopping to change parts or key in any data. Book printers can cut books of different formats and thicknesses in quick succession, without interruption. The format for each book is read with a barcode scanner during infeed and all settings are made automatically, which eliminates makeready time. Specification: Max speed: 1,000 cycles/hr Max untrimmed size: 320x240mm Min untrimmed size: 154x108mm Max book thickness: 40mm Min book thickness: 2mm Max Front trim: 86mm Min front trim: 3mm Max foot trim: 75mm Min foot trim: 3mm 5 x Sigma trimmers available, all the same age. Can be bought individually or as multiples.

Condition: used, Year of construction: 1972, machine/vehicle number: 1171, Capacity: 160 ton Throat depth: 350 mm Ram stroke: 20 - 140 mm Slide adjustment: 75 mm Shut height (stroke down, adjustment up): 740 mm Table surface area : 1000 x 680 mm Slide area: 600 x 300 mm Number of strokes: 50 s.p.m. Required power: 15 kW Weight of machine approx.: 12 ton Standard configuration Machine included: - Fence HS decoiler M 15 / 500 - built in 2009Material width 15 - 500 mmCoil weight 1,5 tCoil exterior diameter 1400 mmCoil interior diameter  380 - 530 mm HS straightener RME 40 - 9 - built in 2009 Material thickness 0,4 - 2 mmNumber of feeding rolls 2 piecesNumber of straightener rolls 9 piecesDiameter of straightener rolls 61,9 mmDiameter of feeding rolls 61,9 mmFeeding speed 40 m / minFeeding length  0 - 9999,99 mm Fedpfxsuqdwxe Ah Njgc Extended machine accessories The machine was converted to SIEMENS S7 in 2009.

Condition: reconditioned (used), Year of construction: 2024, functionality: fully functional, machine/vehicle number: 03, overall weight: 350 kg, total width: 130 mm, total height: 1,800 mm, input voltage: 380 V, type of input current: three-phase, input frequency: 50 Hz, Equipment: documentation/manual, We have 17 sets of NF42 4/54,2/130，2/84,2/66， Year 1987-2005 With double iron roller With rubber prester Fedpfxou A Ir Es Ah Nsgc With 16-20 Harness Frame With binder thread motion With 6 Contact Rail and Stop Motion Device With 2 weft thread transport State: Clean up and Clean, after repair testing

Condition: used, Year of construction: 1978, machine/vehicle number: 455 178, pression: 45 t throat: 230 mm table size: 460 x 690 mm clearance hole in the die: 175 x 220 mm table adjustment: 160 mm tappet area: 185 x 360 mm Fedodd Irgepfx Ah Njgc tappet adjustment: 55 mm stroke adjustment: 4 - 80 mm number of strokes: 120 /min engine: 380 V, 3 kW space needed: 1800 x 1100 x 2100 mm weight: 2800 kg

Condition: ready for operation (used), machine/vehicle number: 838 621, minimum pressure: 180 mbar at suction capacity: 2,2 m³/min outlet nozzle-Ø: 50 mm Fodpfxjdzw I No Ah Nsgc rotational speed: 2780 rpm drive motor: 220/380 V, 0,95 kW space requirement: 510 x 350 x 480 mm

Year of construction: 1965, condition: used, machine/vehicle number: 2383, for tube-Ø: 250 - 530 mm for material thickness: 3 - 40 mm drive: by hand Fgsdpfsb Nv Stox Ah Noc space requirement: 1000 x 800 x 1200 mm Weight: approx. 70 kg

Condition: ready for operation (used), machine/vehicle number: 4105, Grinding area: approx. 130 x 255 mm Grinding speed: 2800 rpm Table size: 150 x 300 mm Drive motor: 380 V, 1.5 kW Fgodpfxsh Ugwvo Ah Nsc Required space: 750 x 700 x 1700 mm Weight: about 380 kg Cup wheel Ø: 180 mm