Used Bianchi Coffee Machines for sale (65,912)

Year of construction: 1959, condition: used, functionality: fully functional, machine/vehicle number: 59/4235, We are offering this used Probat UG 22 drum roaster, manufactured in 1959, which was completely overhauled in 2010 and has been in use at our facility since 2011. It is a gas-fired model and includes a destoner, cyclone, cooling sieve, and chimney. This machine was used in our production until recently and initially roasted 2 tons, and later around 10-15 tons of green coffee. It was completely overhauled in 2010, including new electrical components, and has been running reliably ever since. We are selling it because we are closing down the business. Type: UG 22n Serial number: 59/4235 Year of manufacture: 1959 Heating: Gas [natural gas] Voltage: 230/400 V Current: 16 A Frequency: 50 Hz Temperature sensor: retrofitted, WLAN-enabled, for digital recording of the roasting curve [e.g., Artisan] Djdpsz I Tyzsfx Aiijcp Included in the scope of supply: Destoner Cyclone Cooling sieve Chimney Connecting pipes --> Ready for immediate use If you have any questions or require further information, please feel free to send us a message or call us.

Condition: good (used), Year of construction: 2020, functionality: fully functional, For sale is a WMF 5000-S-Plus fully automatic coffee machine. The machine is sold with all accessories, as shown in the pictures. Viewings are possible at any time and with short notice, subject to prior appointment. VAT is shown separately! Dcodpfx Aiow S T Htjiop

Condition: used, functionality: fully functional, This is a round filter coffee machine, a Bravilor Bonamat B20 HW. This coffee machine is ideally suited for supplying coffee in large establishments during peak hours, such as care facilities, catering businesses, company canteens, etc. The B HW series is equipped with a separate hot water tap. The containers can be easily transported. The unit has undergone a thorough inspection in our in-house workshop and is fully functional. It has only been operated with a water softening system, so there are no limescale deposits in the system. The matching drip tray for dispensing coffee is not shown in the picture, but is also included. The base cabinets shown in the pictures are not included in the offer, but can be purchased as an optional extra. You will receive an invoice with VAT shown. Our used equipment service for you: 6 months warranty on all electrical parts, limited to the replacement of defective parts, without installation and removal costs. High-quality branded equipment at fair prices. Professional overhaul / inspection & expert cleaning. Tested & fully functional - or your money back. Flexible shipping or self-collection options. Competent advice - before and after purchase. Provision of operating instructions, connection diagrams & spare parts. Inspection according to DGUV V3 standard. Technical data: W x D x H: approx. 1173 x 600 x 947 mm Model with 1 brewing system and 2 containers Separate hot water tap With sight glass Coffee brewing unit Peak capacity: 40 liters Hourly output: approx. 90 liters Brewing time: approx. 14 min. / 20 liters Hot water unit Peak capacity: 4.6 liters Hourly output: approx. 20 liters Frequency: 50/60 Hz Voltage: 400 V 3 N Connection value: 11.2 kW Further information: 1 brewing column in the center 1 coffee container on the right and left, removable With hot water dispensing: Coffee is kept warm in a container Audible signal at the end of brewing With timer Digital display Total and daily counters Descaling system Dcjdpfx Aezxn Ausiiep Stainless steel housing Fixed water connection Condition: Used, thoroughly inspected, fully functional Shipping: Delivery or self-collection by arrangement Worldwide shipping on request Shipping to islands or mountain stations only by arrangement Subject to changes and errors Do you have any questions, would you like to request a consultation, or would you like to see something on site? You can reach us by telephone during our opening hours: Monday-Friday 09:00 - 13:00 and 14:00 - 17:00. Sales are made exclusively subject to our general terms and conditions (GTC).

Condition: excellent (used), 620 USED Coffee machines, espresso machines 2-group LA CIMBALI Espresso. We have the La Cimbali M34 and La Cimbali M26 models. EXTERNAL DIMENSIONS mod. M34 (in cm): - W: 78 - L: 60 - H: 60 EXTERNAL DIMENSIONS mod. M26 (in cm): - W: 60 Dcedpe Agpqajfx Aiiop - L: 57 - H: 57 TECHNICAL DATA mod. M34 i M26: - power supply: 220-240V 50/60Hz - power: 4,2-4,9kW The price is a net price per 1 pcs. Paid options available: transport. Our languages: ENGLISH, FRENCH, GERMAN, RUSSIAN, UKRAINIAN.

Condition: like new (used), Year of construction: 2021, functionality: fully functional, Designed for professional use and production of the highest quality cold brew beverages. Quick and efficient cold brew production and built-in double nitro cold brew distribution system. 250 liters per day = 1000 portions, which you can serve while producing more with HardTank. Patented technology lets you extract over 22% within 45 minutes. Short extraction in a closed container eliminates oxidation risk and increases shelf life. Modular design and the highest quality food-grade materials result in a machine that can work flawlessly for decades. If anything gets broken, replacement of each and every element is a child's play. An automatic cleaning program and dedicated cleaning products guarantee stability and safety throughout the production process, while also significantly reducing labor costs and water consumption. The employee's role is to grind the coffee and place it in the filtration basket. After turning it on, the device fills itself with water, starts and stops extraction, undergoes filtration, and pours the cold brew into the keg and engages the cleaning program. All-In-One set includes: - large basket - 18l keg x2 - flow chiller Djdpfowm Enyjx Aiiocp - stout tap x2 - double nitrogen regulator - connection cables Technical details: – Daily output – 250 l – Extraction chamber capacity – 20 l – Filter basket capacity – 1.2 kg – Dimensions – 902 × 830 × 610 mm - Weight - 80/120 kg – Drain – drain pump

Condition: excellent (used), 617 USED Coffee machine, espresso machine 1-group LA CIMBALI Enova. EXTERNAL DIMENSIONS (in cm): - W: 45 - L: 63 - H: 54 TECHNICAL DATA: - power supply: 220-240V 50Hz - power: 3–3.5 kW Dcsdpfxe Agpl Sj Aiisp The price is a net price. Paid options available: transport. Our languages: ENGLISH, FRENCH, GERMAN, RUSSIAN, UKRAINIAN.

Year of construction: 2007, condition: like new (used), functionality: fully functional, BIANCHI SHEET METAL SHEAR, EFFECTIVE WORKING LENGTH 3 METERS, MAXIMUM THICKNESS 6 MM. Dcedpfxo Ah Slpj Aiijp

Condition: excellent (used), 225 USED Double-portion coffee machine. We have 3 of these machines. The machines are in working order. EQUIPMENT: - 2 portafilters, - hot water spout, - frother, Dcsdpfx Aijxy Rzceiep - cup warmer, - automatic coffee dispenser, - water pump. The device is available to verify in our warehouse (36-068 Bachórz, Poland). Paid options available: transport. The price is a net price. Our languages: ENGLISH, FRENCH, GERMAN, RUSSIAN, UKRAINIAN.

Condition: excellent (used), WMF Presto F fully automatic coffee machine 2.2KW day/120 cups Filtered coffee is essential for breakfast, and it also has many fans in day-to-day business. The WMF Presto F is therefore the ideal appliance for businesses that occasionally need a large quantity or a cup of coffee. Touchscreen display Simple menu control at the touch of a finger on the display. All steps are shown step by step on the display. Ingenious keyboard layout Simple keyboard labeling, you can change the labeling yourself. Height-adjustable spout Containers from 70-190 mm high can be filled. Technical data: WMF Presto F Dsdpfep U Tyfjx Aiiscp Type series 1400 Rated power: 2.0 - 2.2 kW Daily coffee output: 120 cups Hot water output / hour: 10 liters Capacity of coffee bean container Choc container approx. 500 g each (1000 g optional) 1/N/PE - 50/60 Hz / 220-230 V 70 to 190 mm (with integrated choc up to 180 mm) Weight: approx. 30 kg Fixed water connection Further items - new and used - can be found in our store! International shipping costs on request!

Condition: excellent (used), 258 USED Double-port coffee maker. EXTERNAL DIMENSIONS (in cm): - height 52, - width 57, - length 75. The device is available to verify in our warehouse (36-068 Bachórz, Poland). Paid options available: transport. Dcsdpfx Aox Syvieiiep The price is a net price. Our languages: ENGLISH, FRENCH, GERMAN, RUSSIAN, UKRAINIAN.

Condition: new, Year of construction: 2025, Automatic container/capsule filling and sealing machine. - Suitable for the filling of powdery products (coffee, coffee blends, chocolate, milk powder, etc.) in different sized capsule containers (e.g. Nespresso, K-Cup, Lavazza, Tassimo, Bellissimo, without filter, etc.) and subsequent sealing. Automatic dosing, filling by an auger filler. UV sterilization system, anti-static device and vacuum cleaning system for mould formats included. Automatic film feeding and double heat sealing of the capsule. - Specifications: max. speed of the machine in neutral: 55 cups/minute; filling range: 0-20g; filling accuracy: +/- 0.15g; capacity of hopper: 5L (approx. 3kg powder); power supply and consumption: 220V, 1.5kW; required compressed air and flow rate: 6-8 bar, approx. 300L/min; flow rate inert gas: approx. 200L/min; machine dimensions: L1900xW1118xH2524mm; weight: 800 kg. Specifications refer to Nespresso capsules, by use of other brands of capsules specifications may vary. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty. Dcodpjv Nkzxefx Aiijp

Condition: excellent (used), functionality: fully functional, Dual-station sandblasting cabinet. • The cabinet is designed for the comfortable operation of two operators simultaneously or for processing exceptionally long components that can be moved between workstations inside the chamber. It is equipped with two independent work chambers and separate abrasive tanks, which allows for the use of different abrasive materials. This solution ensures high efficiency in surface preparation, cleaning, rust removal, and finishing operations. Thanks to its very wide design, two front doors, and two side doors, the device allows for convenient loading of long, oversized, or irregularly shaped objects. Work area: 200 x 68 x 65 cm. • Foot control: Integrated control pedals are located under the device, allowing the abrasive stream to be started without using the hands. • Integrated extraction system: The device is equipped with two fans with filters (visible at the top of the housing), which are responsible for extracting dust generated during sandblasting, ensuring adequate visibility. Dcedpfx Ae Ahpu Roiiop Requires compressed air supply with a pressure of 6–8 bar (90–120 PSI). The device has two abrasive tanks with a capacity of 26 liters each (total 52 liters), which is an ideal solution for professional renovation and cleaning work. Product specifications: * Model: DSBC880 * Material: Steel construction * Color: Grey * Overall dimensions: 206 (L) x 99 (W) x 174 (H) cm * Work area: 200 (L) x 68 (W) x 65 (H) cm * Abrasive tank capacity: 52 liters total (26 liters per tank) * Number of tanks: 2 independent tanks * Dust extraction system: Double dust extraction system * Door configuration: 2 front doors + 2 side doors * Built-in lighting * Sandblasting gloves: Included (material: natural rubber/vinyl) * Control valves: High-flow brass valves * Required air pressure: 6–8 bar (90–120 PSI) * Overall dimension: 207cm x 100cm x h-180 cm * Weight approximately 250 kg

Condition: good (used), Year of construction: 2000, functionality: fully functional, travel distance X-axis: 2,200 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 600 mm, spindle speed (max.): 8,000 rpm, TECHNICAL DETAILS Travel range X-axis: 2,200 mm Travel range Y-axis: 600 mm Travel range Z-axis: 600 mm Dcjdpfxj Afx Hhs Aiijp Number of T-slots: 5 T-slot width: 18 mm T-slot spacing: 125 mm Distance from spindle nose to table: min. 200 mm Tool holder: SK 40 DIN 69871 Pull stud: DIN 69872 Tool clamping force: 12,000 N Inner bearing diameter: 80 mm Spindle speed: max. 8,000 rpm Main spindle motor at 100% duty cycle: 29 kW Main spindle motor (intermittent): 38.5 kW Speed range with constant power from: 1,500 rpm Feed force X, Y and Z axes at 100% duty cycle: 13,000 N Feed force X, Y and Z axes (intermittent): 16,000 N Rapid traverse rate X, Y and Z axes: 30 m/min Working feed rate X, Y and Z axes: max. 10 m/min Milling performance in steel St 60: 650 cm³/min Drilling diameter in steel St 60: 60 mm Threading performance in steel St 60: M36 Tool places: 24 Tool length: max. 300 mm Tool weight: max. 10 kg Tool diameter with full magazine: max. 85 mm Tool diameter with free adjacent positions: max. 125 mm Tool change time: 3.5 s Tool change time chip-to-chip: 7 s MACHINE DETAILS Electrical connection: 55 kW Operating voltage: 400 V / 50 Hz Compressed air connection: 6 bar Coolant pump capacity: 0.75 kW EQUIPMENT Tool magazine with random tool management Coolant pump

Year of construction: 2025, condition: new, Automatic container/capsule filling and sealing machine. - Suitable for the filling of powdery products (coffee, coffee blends, chocolate, milk powder, etc.) in different sized capsule containers (e.g. Nespresso, K-Cup, Lavazza, Tassimo, Bellissimo, without filter, etc.) and subsequent sealing. Automatic dosing, filling by an auger filler. UV sterilization system, anti-static device and vacuum cleaning system for mould formats included. Automatic film feeding and double heat sealing of the capsule. - Specifications: max. speed of the machine in neutral: 90 cups/minute; filling range: 0-20g; filling accuracy: +/- 0.15g; capacity of hopper: 10L (approx. 6kg powder); power supply and consumption: 220V, 7.5kW; required compressed air and flow rate: 6-8 bar, approx. 300L/min; flow rate inert gas: approx. 200L/min; machine dimensions: L3420xW2200xH2688mm; weight: 900 kg. Specifications refer to Nespresso capsules, by use of other brands of capsules specifications may vary. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty. Dcsdpov Nkz Eefx Aiijp

Condition: used, Year of construction: 2010, The Maximum Machines UG PSV 600, manufactured in 2010, is a machine with a format of 600 mm. It is currently in stock and located in Germany. This pressing unit with a vertical stacker is PLC-controlled and features automatic shingle control, multiple counters, and a batch counter. It offers better information through the PLC display, easier setting, and enhanced efficiency with a stronger pressing unit. Additionally, it is equipped for 2-up operations. The delivery terms are FCA. Format: 600 mm Dsdpfx Aisvfxx Dsiocp Equipment: PSV 600 - Pressing unit with vertical stacker basics: plc-controlled - automatic shingle control - multiple counters better informations by plc-display - easier setting - more efficiency Stronger pressing unit - batch counter - 2-up-equipment

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, working width: 1,300 mm, overall weight: 7,500 kg, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Working width: max. 1,300 mm Number of spray booths: 1 Pump type: Wagner Number of spray guns: 4 MACHINE DETAILS Weight: 7,500 kg Number of transport packages: 7 EQUIPMENT Spray guns Dedpfx Aj Af Hntjiiecp Documentation

Condition: new, Year of construction: 2025, operating hours: 1 h, functionality: fully functional, travel distance X-axis: 4,000 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 1,000 mm, controller manufacturer: STYLE CNC Machines, number of slots in tool magazine: 24, motor manufacturer: FANUC, Delivery after consultation Ref: 24F048 Dcedpfxew Ty S Ss Aiiep Year of construction: 2025 Condition: Showroom Specifications: - X-axis: 4000 mm - Y-axis: 1000 mm - Z-axis: 1000 mm - 26 kW (S6) main motor - 8000 rpm - BT-40 - Automatic tool changer (24 positions) - Remote service (IXON) + network connection - Stronger coolant pump incl. spray gun - Upgraded to the latest STYLE software available

Condition: like new (used), Year of construction: 2023, operating hours: 3,200 h, functionality: fully functional, machine/vehicle number: IX-GN-4044-S, input voltage: 230 V, warranty duration: 12 months, working width: 900 mm, total width: 1,000 mm, total length: 2,200 mm, total height: 1,100 mm, year of last overhaul: 2026, air pressure: 6 bar, control voltage: 230 V, ⚙️ Included: • Full conveyor systems • Integrated reject systems ( air reject ) • Stainless steel food-grade construction • Touchscreen control panels 2 off right hand units, Full production capacity 60-70k per hour Dcodpfx Aioyyl Aqsisp ✅ Condition: • Recently removed from production • Fully operational prior to removal • Clean, well-maintained units • Matching set (ideal for line integration or multi-site use) 💡 Ideal For: • Ready meal manufacturers • Meat / poultry processors • Bakery & snack producers • Food contract packers Detects Glass / Plastic / Wood any foreign bodies 📦 Sale Options: • Available individually or as a complete package • Priority given to bulk buyers 🌍 Additional Information: • Available for UK and international buyers • Assistance with loading and logistics can be arranged • Viewing can be organized by appointment 💰 Price: £20,500 Can be discussed on appointment / via email / phone (Discount available for multi-unit purchase) 📩 Contact: Craig Conway Conways Engineering Ltd Please get in touch for: • Additional photos • Full specifications • Video / demonstration • Bulk purchase enquiries All Test certs attached from Ishida for X Ray and radiation safe levels Viewings Welcome for full demonstration

Condition: used, Year of construction: 2000, travel distance X-axis: 1,250 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 750 mm, controller model: Fanuc 16i-M, spindle speed (max.): 4,000 rpm, TECHNICAL DETAILS X-axis travel: 1,250 mm Y-axis travel: 700 mm Z-axis travel: 750 mm Distance from spindle nose to table: 100–850 mm Rapid traverse rate X/Y/Z: 15 m/min Spindle speed: 4,000 rpm Spindle power: 26 kW Spindle interface: ISO 50 / DIN Number of pallets: 2 Table size: 650 × 1,400 mm Table load: max. 1,500 kg Magazine type: Chain magazine Number of tool positions: 41 Tool diameter: max. 120 mm Tool diameter with free adjacent positions: max. 200 mm Tool length: max. 400 mm Tool weight: max. 20 kg MACHINE DETAILS High-pressure coolant pressure: 30 bar CNC control: Fanuc 16i-M Dimensions & Weight Machine weight: 16,750 kg Overall dimensions: 7,135 × 5,300 × 3,426 mm EQUIPMENT Gear change Djde Agfr Eepfx Aiijcp Chip conveyor

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, total length: 4,900 mm, total width: 1,500 mm, total height: 2,300 mm, overall weight: 1,500 kg, input voltage: 400 V, Cup filling and sealing machine Brand: Food Dosing Packing Machines SP. Z.O.O., Type: PAK 5.0, Machine number: 457, Year of construction: 2015, Voltage 400 V, 3 Ph, Power 7.5 kW, Pressure 6-8 bar, Weight: 1500 kg, 2-track cup denester, Dcedjv Abm Espfx Aiiop Dimensions: 4900 mm x 1500 mm x 2300 mm.

Condition: good (used), functionality: fully functional, travel distance X-axis: 400 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, spindle speed (max.): 3,600 rpm, controller model: DECKEL Contour 3, TECHNICAL DETAILS X-axis travel: 400 mm Y-axis travel: 400 mm Z-axis travel: 400 mm Table length: 700 mm Table width: 460 mm Table load capacity: 350 kg Spindle speed: 40–3,600 rpm Tool interface: SK 40 MACHINE DETAILS Control system: DECKEL Contour 3 EQUIPMENT Automatic tool changer Dcedpe Afxabjfx Aiiep

Condition: excellent (used), Year of construction: 2024, functionality: fully functional, working width: 600 mm, input voltage: 400 V, overall weight: 3,560 kg, workpiece height (max.): 170 mm, The fast deburring machine for deburring, rounding and finishing steel cut parts up to 600 mm wide. This Q-Fin deburring and finishing machine was developed especially for applying a large radius of up to 2 mm on steel sheet. With the SER600 Super Edge Rounder from Q-Fin it is possible to deburr, grind, edge break, round off, remove slag, remove oxide skin or apply a line finish to sheet metal up to 600 mm wide. A combination of these operations is also possible. Dodpfel Dw D Eex Aiiscp The throughput of the SER600 is 3 to 5 times higher than comparable machines. This new 2024 machine is equipped with magnetic support, making it suitable for processing steel cut parts and other magnetic materials. This machine is equipped with as many as 5 machining stations. Easy operation through an HMI touch screen on the front of the machine. The first station of the SER600 consists of a grinding unit. The grinding belt of this unit removes burrs and/or burn-in points from the product surface. If you have no burrs, you can leave the grinding belt off or remove them. It is also possible to apply a line finish to your product with a finer grinding belt or finish with a scotch-brite belt. The second and the third station consists of the disc brush unit containing 4 oscillating disc brushes. The fourth and the fifth station consists of 2 round brushes, rotating counterclockwise and clockwise. With the brushes you remove the sharp edges of the product by breaking the edges or, by the unique combination of two brush systems, edge round them with a radius up to R=3 mm. The installation of special brushes makes this SER600 with magnetic system also very suitable to remove the oxide skin of steel products or slag from plasma cut products. We sell the combination with a WES6000 wet working grinding dust extraction system as 'SER600 Set'. The WES6000 was developed by Q-Fin to extract grinding dust safely and without pressure loss. This fully stainless steel extraction system is a wet-acting system that extracts grinding dust from stainless steel, steel and aluminum, eliminating the risk of fire and explosion. According to Q-Fin, it is the safest, easiest and most durable way to extract grinding dust. No more grinding dust in the air and/or work environment with the WES6000. At this moment we have two SER600 machines in stock: 1x new (built year 2025) 1x used for only a few months; as new. built year 2024. Both machines can be viewed by appointment in Bergeijk. Both machines have a 1 year warranty on construction and all non-wearing parts. We can also provide on-site installation of the SER600 + WES6000) including training for the operators. - Connected load SER600 machine: 400 V, 50 Hz, 32 A, 16 kW - Dimensions: 3640 x 1585 x 2085 mm (L x W x H) - Weight: 3560 kg

Condition: ready for operation (used), Year of construction: 2020, functionality: fully functional, For sale: 2 units of professional spiral dough mixers AYPEK AYP-MIX 70, suitable for bakeries, restaurants, and food production. Dcedpfx Aijyybkkoiep These industrial machines are designed for intensive use and provide consistent, high-quality dough mixing. The mixers are in good working condition and ready for operation. Available as a set or individually.

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: 42503, clamping force: 4,000 kN, screw diameter: 70 mm, injection pressure: 1,481 bar, injection weight: 1,040 g, overall weight: 5,600 kg, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Clamping unit Clamping force: 4,000 kN Platen length: 1,300 mm Platen width: 1,080 mm Tool height: min. 350 mm Mold opening: max. 1,300 mm Injection unit Screw diameter: 70 mm Injection volume: 1,155 cm³ Injection weight: 1,040 g Injection pressure: 1,481 bar MACHINE DETAILS Rated power of the pump motor: 45 kW Dimensions & Weight Dimensions (L x W x H): approx. 8,000 x 2,250 x 2,200 mm Dcedj Afw Drspfx Aiiop Machine weight: approx. 5,600 kg

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, Complete P20 & P30 HVAC Duct Flange Profile Roll Forming Lines with Butyl Sealant System For sale is a complete set of two professional roll forming lines for the production of P20 and P30 flange profiles, used in the manufacturing of rectangular HVAC ducts and fittings. The set includes: - P20 flange profile production line - P30 flange profile production line Both machines are equipped with an integrated butyl sealant application system. Depending on production requirements, the profiles can be manufactured with or without factory-applied butyl sealant. This provides full flexibility and allows the finished profiles to be adapted to different duct manufacturing technologies and customer requirements. The machines perform the complete production process – from coil decoiling, through multi-stage roll forming, to automatic cutting of the finished profile to the required length. Technical highlights - 18 roll forming stations - Automatic PLC-controlled cutting system - Production speed up to 9 m/min without sealant application - Production speed up to 5 m/min with butyl sealant application - Integrated butyl sealant application system - Complete production lines for P20 and P30 profiles Both machines are in very good technical condition. Since new, they have been used exclusively for the production needs of our own HVAC duct manufacturing facility. They have not been used for continuous mass production of profiles for commercial sale, therefore their overall level of utilisation is relatively low. Both production lines are fully operational, properly adjusted, tested and ready for immediate production. The machines are offered as a complete P20 + P30 set, allowing the buyer to establish in-house production of the two main flange profile sizes commonly used in the manufacturing of rectangular HVAC ducts and fittings. Relocation and commissioning support We can provide technical assistance with dismantling and relocation of the machines. Dcjdpfx Aijzx Rz Hjiep We can also support the buyer with installation, adjustment, testing and commissioning at the new production facility, helping to ensure that both lines are properly set up and ready for production after relocation. The machines can be inspected while in operation, and production tests can be carried out prior to purchase. The indicated price is NET and VAT will be added where applicable.