Used Benfra 135 B for sale (40,332)

Condition: good (used), Lechner IV B Hydraulic Bookbinding Press Iedeymxn Sopfx Abujar The machine is ready to operate. The press has a built-in hydraulic unit. Four stations. Irreplaceable in bookbinding for the production of books, pads, etc.

Year of construction: 2019, condition: ready for operation (used), A complete painting system on two levels for engine manufacturing including all necessary aggregates and components is available. Workpiece carriers in the system: 118, cycle time: approx. 49s, complete throughput time: 97min, max. production capacity with 3 shifts: 258000/year, overall system dimensions X/Y: approx. 26000mm/9000mm. 1) Adsorption dryer. 2) Steam humidifier Carel. 3) Two- and three-stage filter boxes. 4) Compressor technology. 5) Air dryer Hygrex. 6) Robot with control cabinet and spray gun. 7) Paint dosing pump. 8) Paint preparation and cleaning. 9) Osmosis system. This is a complete painting system using a robot from cleaning to the drying process. Documentation available. An on-site inspection is possible. Isdpsytgpqsfx Abuoar

Condition: reconditioned (used), Universal Tool Milling Machine Make: harich (DECKEL) Model: B (FP 2) Aktiv Refurbished with CE certification Geometric inspection with test protocol with warranty Accessories: Ijdpfx Abex A T Evoujar - 3-axis digital readout Heidenhain Positip 8016 - Fixed table or universal table - Vertical milling head SK 40 - Centralized manual lubrication - Coolant system - Operating manual CE and safety equipment: - New machine electrics with control cabinet - Electronically monitored cover on the vertical milling head - Chuck guard with electrical interlock - Drive motor with brake function - Control panel with emergency stop, enable, start and stop buttons, potentiometer for feed rate adjustment - New documentation for machine and control cabinet - CE declaration of conformity

Condition: excellent (used), Year of construction: 1988, functionality: fully functional, New arrival Ijdpfx Aok Ufz Nebusar Hydraulic surface grinding machine Z&B Ziersch FS 2045 T, year 1988 Grinding range 500 x 200 mm – vertical feed – micrometer feed – electronic handwheel – automatic feed – digital readout. Automatic cross feed, both continuous and intermittent, micro-fine cross adjustment – magnetic chuck with demagnetization. Hydraulic overhead dresser – leveling feet – machine has been fully checked – all functions available – runs very smoothly! Electrical circuit diagram available. Pricing: ex stock – subject to prior sale and errors.

Condition: new, Year of construction: 2026, Kündig Perfect-2 1350 RED-L Wide Belt Sander incl. Intermediate Lacquer Sanding Configuration Special price for exhibition machine - showroom model - - Robust, space-saving wide belt sander for the highest standards - Constant working height due to upper part adjustment - Working width: 1350 mm - Overhead sanding, with 2 sanding units - Serrated rubber contact roller in proven hardness - Infinitely variable height adjustment of the contact roller according to grit scale - Electric lifting/lowering of the contact roller depending on unit selection - Electronically controlled segmented sanding pad - Entire sanding pad unit tiltable by 10° - Parallel spring-loaded, ground steel pressure roller at the infeed - Rubberized pressure roller between the sanding units and at the outfeed - 2 motors: 18.5 kW and 11 kW, 400 Volt, 50 Hz - Motorized precision height adjustment with digital readout - Belt tension, control, and oscillation pneumatically operated Compressed air consumption approx. 2 l/min - Optimum safety thanks to automatic instant stop with disc brake in case of belt breakage, etc. - Workpiece feed 2.2 kW with conveyor belt and drive roller - Vacuum system for the entire working table with additional perforation of 200 mm for smaller workpieces - Automatic thickness setting across the entire working width - Workpiece over-thickness protection with instant feed stop and lift-off automation - Stepless adjustment of material removal - Electronic feed control on operator panel, infinitely variable 3 - 15 m/min - PLC control with teach-in memory - Pneumatic conveyor belt control - Workpiece support with rollers at infeed and outfeed - Enormatic: fully automated quick setup and feed activation - Eco energy saving mode - Error diagnostics Iasdpfx Ajk Dpp Ssbujr - Pass-through height 210 mm up to 18.5 kW - Sanding belt size 1350 x 2000 mm Perfect - Features: High-quality swiveling Plexiglas control panel - 10'' touch screen - Industrial control system - Automatic pressure regulation and storage of sanding pad elements - Electronic compensation for sanding belt grit size - Job and operating hours counter Lacquer Equipment: - Infinitely variable sanding belt speed on 2nd unit - Cleaning nozzles for the sanding belt of the 2nd unit, controlled by use - Electronic sanding pad with 22 mm segment width - Additional sanding pad insert Additional options included with this machine: Fold-down outfeed table extension (without panel) C10) LED package ASB5+AS3) ECS workpiece air blow-off with fan Location: 54634 Bitburg - Immediately available -

Condition: reconditioned (used), Year of construction: 2026, functionality: fully functional, spindle bore: 105 mm, turning diameter: 1,350 mm, turning diameter over bed slide: 1,350 mm, turning diameter over top slide: 1,000 mm, total length: 5,500 mm, total width: 2,130 mm, total height: 1,550 mm, overall weight: 12,300 kg, workpiece weight (max.): 11,000 kg, spindle mount: MK 6, The PORĘBA TR-135B/4M universal lathe has been comprehensively rebuilt and modernized, has technical parameters in accordance with the technical and operational documentation DTR of a new machine, WOT technical acceptance conditions and the Polish Standard and also meets EU requirements. The machine is covered by a full 12-month warranty on spare parts and electrical components. Availability: within 3,5 months, starting from the order Iedpfx Aeflaxvjbuoar Technical specifications: - distance between centers/turning length: 4000 mm - turning diameter over bed: 1350 mm - turning diameter over support: 1000 mm - turning diameter in bridge recess: 1650 mm - spindle bore diameter: 105 mm - maximum workpiece weight between centers: 8000 kg - maximum workpiece weight between centers + 1 steady: 10000 kg - maximum workpiece weight between centers + 2 steadies: 11000 kg - number of spindle speeds: 21 - range of rotational speeds (rpm): 5 - 630 - number of feeds: 80 - range of feeds (mm/rev): longitudinal: 0.07 - 10 transverse: 0.035 – 5 - engine power: 27/41 kW (1st gear / 2nd gear) - overall dimensions: total length: 6500 mm width: 2130 mm height: 1550 mm total weight: 12300 kg Standard equipment: tailstock, coolant pump, tool post, chuck cover Additional equipment available at extra charge: - 3- or 4-jaw chucks, various diameters and variants - Digital readout on 2 axes with assembly and calibration - Steady rest, 40-400 mm, with rollers - Steady rest, 400-700 mm, with rollers - Steady rest, 450-900 mm, with rollers - MULTIFIX quick change tool post

Condition: refurbished (used), Year of construction: 2026, functionality: fully functional, spindle bore: 120 mm, turning diameter: 1,350 mm, turning diameter over bed slide: 1,350 mm, turning diameter over top slide: 1,000 mm, turning length: 5,000 mm, total length: 7,500 mm, total width: 2,130 mm, total height: 1,550 mm, rotational speed (max.): 630 rpm, rotational speed (min.): 5 rpm, workpiece weight (max.): 11,000 kg, spindle mount: MK 6, The PORĘBA TR-135B1/5M universal lathe has been comprehensively rebuilt and modernized and has technical parameters in accordance with the technical and operational documentation DTR of a new machine, WOT technical acceptance conditions and the Polish Standard and also meets EU requirements. The machine is covered by a full 12-month warranty on spare parts and electrical components. Availability: in stock, under power, ready for technical acceptance. Technical data: - distance between centers/turning length: 5000 mm - turning diameter over bed: 1350 mm - turning diameter over support: 1000 mm - turning diameter in bridge recess: 1650 mm - spindle bore diameter: 120 mm - Power feed on compound slide for machining tapers, conical parts, 1°- 90°, up to 450 mm - maximum workpiece weight between centers: 8,000 kg - maximum workpiece weight between centers + 1 steady: 10,000 kg - maximum workpiece weight between centers + 2 steadies: 11,000 kg - number of spindle speeds: 21 - range of rotational speeds (rpm): 5 - 630 - number of feeds: 80 - range of feeds (mm/rev): longitudinal: 0.07 - 10 transverse: 0.035 – 5 for upper drawer: 0.017 – 2,5 Iasdpfx Asva Elajbuer - engine power [kW]: 22/41 (1st gear / 2nd gear) - overall dimensions: total length: 7500 mm width: 2130 mm height: 1550 mm total weight: 13200 kg Standard equipment: tailstock, coolant pump, tool post, chuck cover, chip tanks Additional equipment available for price upgrade: - 3- or 4-jaw chucks, various diameters and variants - Digital readout on 2 axes with assembly and calibration - Steady rest, 40-400 mm, with rollers - Steady rest, 400-700 mm, with rollers - Steady rest, 450-900 mm, with rollers - MULTIFIX quick change tool post

Condition: reconditioned (used), Year of construction: 2026, functionality: fully functional, spindle bore: 120 mm, turning diameter: 1,350 mm, turning diameter over bed slide: 1,350 mm, turning diameter over top slide: 1,000 mm, total length: 8,500 mm, total width: 2,130 mm, total height: 1,550 mm, rotational speed (max.): 630 rpm, rotational speed (min.): 5 rpm, workpiece weight (max.): 15,000 kg, spindle mount: MK 6, The PORĘBA TR-135B2/6M universal lathe has been comprehensively rebuilt and modernized, has technical parameters in accordance with the technical and operational documentation DTR of a new machine, WOT technical acceptance conditions and the Polish Standard and also meets EU requirements. The machine is covered by a full 12-month warranty on spare parts and electrical components. Availability: delivery time 3,5 months, starting from the order Technical data: - distance between centers/turning length: 6000 mm - turning diameter over bed: 1350 mm - turning diameter over support: 1000 mm - turning diameter in bridge recess: 1650 mm - spindle bore diameter: 120 mm - power drive on upper compound slide Ijdpfx Aokyt Hlebuoar - maximum workpiece weight between centers: 9,000 kg - maximum workpiece weight between centers + 1 steady: 12,000 kg - maximum workpiece weight between centers + 2 steadies: 15,000 kg - number of spindle speeds: 21 - range of rotational speeds (rpm): 5 - 630 - number of feeds: 80 - range of feeds (mm/rev): longitudinal: 0.07 - 10 transverse: 0.035 – 5 for upper drawer: 0.017 – 2,5 - engine power: 27/41 kW (1st gear / 2nd gear) - overall dimensions: total length: 8500 mm width: 2130 mm height: 1550 mm total weight: 14100 kg Standard equipment: tailstock, coolant pump, tool post, chuck cover Additional equipment available at extra charge: - 3- or 4-jaw chucks, various diameters and variants - Digital readout on 2 axes with assembly and calibration - Steady rest, 40-400 mm, with rollers - Steady rest, 400-700 mm, with rollers - Steady rest, 450-900 mm, with rollers - MULTIFIX quick change tool post

Condition: refurbished (used), Year of construction: 2026, functionality: fully functional, spindle bore: 120 mm, turning diameter: 1,350 mm, turning diameter over bed slide: 1,350 mm, turning diameter over top slide: 1,000 mm, turning length: 5,000 mm, total length: 7,500 mm, total width: 2,130 mm, total height: 1,550 mm, spindle speed (max.): 630 rpm, spindle speed (min.): 5 rpm, overall weight: 12,900 kg, workpiece weight (max.): 15,000 kg, spindle mount: MK 6, The PORĘBA TR-135B2/5M universal lathe has been comprehensively rebuilt and modernized, has technical parameters in accordance with the technical and operational documentation DTR of a new machine, WOT technical acceptance conditions and the Polish Standard and also meets EU requirements. The machine is covered by a full 12-month warranty on spare parts and electrical components. Availability: delivery time 3,5 months, starting from the order Technical data: - distance between centers/turning length: 5000 mm - turning diameter over bed: 1350 mm - turning diameter over support: 1000 mm - turning diameter in bridge recess: 1650 mm - spindle bore diameter: 120 mm - maximum workpiece weight between centers: 9,000 kg - maximum workpiece weight between centers + 1 steady: 12,000 kg - maximum workpiece weight between centers + 2 steadies: 15,000 kg - number of spindle speeds: 21 - range of rotational speeds (rpm): 5 - 630 - number of feeds: 80 Iaodsi Apilepfx Abuor - range of feeds (mm/rev): longitudinal: 0.07 - 10 transverse: 0.035 – 5 for upper drawer: 0.017 – 2,5 - engine power [kW]: 22/41 (1st gear / 2nd gear) - overall dimensions: total length: 7500 mm width: 2130 mm height: 1550 mm total weight: 12900 kg Standard equipment: tailstock, coolant pump, tool post, chuck cover Additional equipment available at extra charge: - 3- or 4-jaw chucks, various diameters and variants - Digital readout on 2 axes with assembly and calibration - Steady rest, 40-400 mm, with rollers - Steady rest, 400-700 mm, with rollers - Steady rest, 450-900 mm, with rollers - MULTIFIX quick change tool post

Condition: refurbished (used), Year of construction: 2026, functionality: fully functional, spindle bore: 120 mm, turning diameter: 1,350 mm, turning diameter over bed slide: 1,350 mm, turning diameter over top slide: 1,000 mm, turning length: 10,000 mm, total length: 12,500 mm, total width: 1,800 mm, total height: 1,800 mm, spindle mount: MK 6, The PORĘBA TR-135B2/10M universal lathe has been comprehensively rebuilt and modernized, has technical parameters in accordance with the technical and operational documentation DTR of a new machine, WOT technical acceptance conditions and the Polish Standard and also meets EU requirements. The machine is covered by a full 12-month warranty on spare parts and electrical components. Availability: within 3,5 months, starting from the order Technical data: - distance between centers/turning length: 10000 mm - turning diameter over bed: 1350 mm - turning diameter over support: 1000 mm - turning diameter in bridge recess: 1650 mm - spindle bore diameter: 120 mm - maximum workpiece weight between centers: 9,000 kg - maximum workpiece weight between centers + 1 steady: 12,000 kg - maximum workpiece weight between centers + 2 steadies: 15,000 kg - number of spindle speeds: 21 - range of rotational speeds (rpm): 5 - 630 - number of feeds: 80 - range of feeds (mm/rev): longitudinal: 0.07 - 10 transverse: 0.035 – 5 for upper drawer: 0.017 – 2,5 - engine power [kW]: 22/41 (1st gear / 2nd gear) - overall dimensions: total length: 12500 mm width: 2130 mm height: 1550 mm total weight: 17700 kg Standard equipment: tailstock, coolant pump, tool post, chuck cover Additional equipment available at extra charge: - 3- or 4-jaw chucks, various diameters and variants - Digital readout on 2 axes with assembly and calibration - Steady rest, 40-400 mm, with rollers - Steady rest, 400-700 mm, with rollers - Steady rest, 450-900 mm, with rollers - MULTIFIX quick change tool post Iaodpfjkh Hbhjx Abuor

Condition: refurbished (used), Year of construction: 2026, functionality: fully functional, spindle bore: 120 mm, turning diameter: 1,350 mm, turning diameter over bed slide: 1,350 mm, turning diameter over top slide: 1,000 mm, turning length: 6,000 mm, total length: 8,500 mm, total width: 2,130 mm, total height: 1,550 mm, spindle speed (max.): 630 rpm, spindle speed (min.): 5 rpm, overall weight: 14,100 kg, workpiece weight (max.): 11,000 kg, spindle mount: MK 6, The PORĘBA TR-135B1/6M universal lathe has been comprehensively rebuilt and modernized, has technical parameters in accordance with the technical and operational documentation DTR of a new machine, WOT technical acceptance conditions and the Polish Standard and also meets EU requirements. The machine is covered by a full 12-month warranty on spare parts and electrical components. Availability: delivery time 3,5 months, starting from the order Technical specifications: - distance between centers/turning length: 6000 mm - turning diameter over bed: 1350 mm - turning diameter over support: 1000 mm - turning diameter in bridge recess: 1650 mm - spindle bore diameter: 120 mm - maximum workpiece weight between centers: 8,000 kg - maximum workpiece weight between centers + 1 steady: 10,000 kg - maximum workpiece weight between centers + 2 steadies: 11,000 kg - number of spindle speeds: 21 - range of rotational speeds (rpm): 5 - 630 - number of feeds: 80 - range of feeds (mm/rev): longitudinal: 0.07 - 10 transverse: 0.035 – 5 for upper drawer: 0.017 – 2,5 - engine power: 27/41 kW Iaodpfx Aofhk Inebusr - overall dimensions: total length: 8500 mm width: 2130 mm height: 1550 mm total weight: 14100 kg Standard equipment: tailstock, coolant pump, tool post, chuck cover Additional equipment available at extra charge: - 3- or 4-jaw chucks, various diameters and variants - Digital readout on 2 axes with assembly and calibration - Steady rest, 40-400 mm, with rollers - Steady rest, 400-700 mm, with rollers - Steady rest, 450-900 mm, with rollers - MULTIFIX quick change tool post

Condition: refurbished (used), Year of construction: 2026, functionality: fully functional, spindle bore: 105 mm, turning diameter: 1,350 mm, turning diameter over bed slide: 1,350 mm, turning diameter over top slide: 1,000 mm, turning length: 3,000 mm, total length: 5,500 mm, total width: 1,800 mm, total height: 1,800 mm, overall weight: 11,400 kg, workpiece weight (max.): 11,000 kg, spindle mount: MK 6, The PORĘBA TR-135B/3M universal lathe has been comprehensively rebuilt and modernized, has technical parameters in accordance with the technical and operational documentation DTR of a new machine, WOT technical acceptance conditions and the Polish Standard and also meets EU requirements. Ijdpfx Asdy I I Ajbuoar The machine is covered by a full 12-month warranty on spare parts and electrical components. Availability: within 3,5 months, starting from the order Technical specifications: - distance between centers/turning length: 3000 mm - turning diameter over bed: 1350 mm - turning diameter over support: 1000 mm - turning diameter in bridge recess: 1650 mm - spindle bore diameter: 105 mm - maximum workpiece weight between centers: 8000 kg - maximum workpiece weight between centers + 1 steady: 10000 kg - maximum workpiece weight between centers + 2 steadies: 11000 kg - number of spindle speeds: 21 - range of rotational speeds (rpm): 5 - 630 - number of feeds: 80 - range of feeds (mm/rev): longitudinal: 0.07 - 10 transverse: 0.035 – 5 - engine power [kW]: 27/41 (1st gear / 2nd gear) - overall dimensions: total length: 5500 mm width: 2130 mm height: 1550 mm total weight: 11400 kg Standard equipment: tailstock, coolant pump, tool post, chuck cover Additional equipment available at extra charge: - 3- or 4-jaw chucks, various diameters and variants - Digital readout on 2 axes with assembly and calibration - Steady rest, 40-400 mm, with rollers - Steady rest, 400-700 mm, with rollers - Steady rest, 450-900 mm, with rollers - MULTIFIX quick change tool post

Condition: ready for operation (used), Year of construction: 2011, pressure 135 t chamfer lenght 3100 mm distance between columns 2600 mm column arm 410 mm ram stroke speed 180 mm/sec work speed 10.0 mm/sec return speed 135 mm/sec work stroke 275 mm dayligth 550 mm table height 900 mm table width 90.0 mm control ModEva 12S oil volume 200 ltr. voltage 400 Volt total power requirement 11.0 kW weight 8800 kg range L-W-H 4250 x 2150 x 2800 mm current new price approx. 80.000 euros special price on request - in checked conditions - machinevideo - ?v=ALo1SpWfnTk ----- SPEED BEND electro-hydraulic press brake with : * increased installation height * increased cylinder stroke * increased throat depth ----- Equipment: - CNC electro-hydraulic press brake - CYBELEC "ModEva 12S" CNC control unit Iedpfxeyk Dhrj Abuear * High-resolution screen * Clear, concise menus in the language of the operator * Tools and products library - CNC controlled axis : Y1 - Y2 - X - R CNC crowning - CNC electro-motorized backgauge * Backgauge with R-axis, on ball screws * Traverse paths : X = 800 mm // R = 250 mm * Traversing speed X axis ... 230 mm/s * with 4x manually adjustable stop fingers - 3x 835 mm .. RehfuÃ? upper tool "PS 135.85-R08", system "A" * including quick-change clamp * Including crowning device in the tool holder - 3x 835 mm ... split universal die block "M 460 R" * including 1x "C 1050-R" die shoe - Rear safety device : Light barrier - BOSCH/HOERBIGER hydraulic components - SIEMENS electrical components - FIESSLER AKAS laser safety device in front of the machine (incl. FPSC) - 2x front support arms with SLIDING system (HIWIN plain bearings) - 1x free-moving double foot control - CE mark / declaration of conformity - Operating instructions

Condition: new, width of the strips 300 mm band length 2070 mm band speed 7.0 m/sec surface of working table 750 x 380 mm diameter 87.7 Führungsrollen mm engine output 1.5 kW total power requirement 400 Volt weight of the machine ca. 88.0 kg. range L-W-H 1050 x 600 x 400 mm Iasdsxaapiopfx Abuor MADE IN GERMANY Furnishing : - robust electric motor belt sander - strong drive motor - including sanding belt - including workpiece stop - manually adjustable deflection pulley - Machine base - Connection cable + plug - Instruction manual in German

Condition: used, mileage: 545,407 km, power: 355 kW (482.67 HP), first registration: 06/2018, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, total width: 2,550 mm, total height: 4,000 mm, loading space volume: 14 m³, loading space length: 6,450 mm, loading space width: 2,480 mm, loading space height: 800 mm, Year of construction: 2018, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), navigation system, parking heater, DAF XF 480 FAN with Fassi F135 A2.22 Building Materials Crane VIN: G207799 Chassis / Attachments: * Full air suspension * Lifting axle * Wheelbase: 4,800 mm / 1,400 mm * Tyres: 315/80 R22.5 * Tyre tread remaining: Front approx. 80/80%, Middle approx. 80%, Rear approx. 60% * 1 x Aluminium tank 620 l * 1 x AdBlue tank * 1 x Hydraulic oil tank * 1 x PVC toolbox * 1 x Stainless steel toolbox * Fixed trailer coupling * Duomat + 2 ladders Superstructure: * Reichert body BP6500K-H * Fassi F135 A2.22 building materials crane with top seat * 2 extensions * 2 rear outriggers * Drop sides 0.80 m * Body dimensions: 6.45 m x 2.48 m x 0.80 m * Lashing rings * Aluminium floor * Pallet fork, 360° rotatable Cab / Driver’s compartment: * 2 bunks * Roof hatch * Automatic climate control * Auxiliary heating * Navigation system * Hands-free kit * CD radio with USB / AUX / BT * CB radio Engine / Transmission: * 355 kW // 12,902 cm³ // Euro 6 c * Automatic transmission * ZF intarder * Differential lock Weights: * Gross vehicle weight: 26,000 kg * Payload: 11,520 kg * Unladen weight: 14,480 kg Miscellaneous: * German vehicle * 1 previous owner ---- New general inspection / safety inspection or gross weight downgrading/upgrading on request. We’re also happy to assist you in obtaining export/temporary license plates, and can arrange transport of your purchased vehicle within Germany. Get in touch with us! ---- We speak: German, English, and Russian! ---- No liability for printing or typographical errors. Subject to prior sale, changes, and errors! ---- Who are we? Leible Nutzfahrzeuge is a family business based in Kehl am Rhein. With years of experience in reconditioning and selling commercial vehicles, we are a reliable partner for customers worldwide. Leible Nutzfahrzeuge specializes in selling new and used commercial vehicles. On 11,000 m², you’ll find a large selection of vehicles. Our company philosophy is based on fairness and professionalism. Customer satisfaction is our top priority, so we offer a comprehensive all-in-one service package and provide you a dedicated contact person who will guide you through the buying or selling process. See for yourself! Iasdjwwyd Rjpfx Abuer Our services for you: Vehicle loading We’re happy to assist in loading your purchased vehicles. Organizing special transports We’re happy to help organize special transport for you. Temporary/export license plates We’re happy to assist in obtaining export or short-term plates. Customs formalities We’re happy to assist with customs procedures.

Condition: used, mileage: 545,407 km, power: 355 kW (482.67 HP), first registration: 06/2018, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, total width: 2,550 mm, total height: 4,000 mm, loading space volume: 14 m³, loading space length: 6,450 mm, loading space width: 2,480 mm, loading space height: 800 mm, Year of construction: 2018, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), navigation system, parking heater, DAF XF 480 FAN with Fassi F135 A2.22 Building Material Crane VIN: G207799 Chassis / Attachments: * Full air suspension * Lifting axle * Wheelbase: 4,800 mm / 1,400 mm * Tyres: 315/80 R22.5 * Remaining tread depth: F.~80/80% M.~80% R.~60% * 1 x Aluminum tank 620 l * 1 x AdBlue tank * 1 x Hydraulic tank * 1 x PVC toolbox * 1 x Stainless steel toolbox * Fixed trailer coupling * Duomat + 2 ladders Bodywork: * Reichert body BP6500K-H * Fassi F135 A2.22 building material crane with high seat * 2x extensions Iodpfx Aswwydwebuear * 2 rear support legs * Drop sides 0.80 m * Body dimensions: 6.45 m x 2.48 m x 0.80 m * Lashing eyes * Aluminum floor * Rotatable pallet fork 360° Cab / Driver's Cab: * 2 bunks * Roof hatch * Automatic climate control * Auxiliary heating * Navigation system * Hands-free equipment * CD radio with USB / AUX / Bluetooth * CB radio Engine / Transmission: * 355 kW // 12,902 cm³ // Euro 6 c * Automatic transmission * ZF-Intarder * Differential lock Weights: * Gross vehicle weight: 26,000 kg * Payload: 11,520 kg * Unladen weight: 14,480 kg Miscellaneous: * German vehicle * 1 previous owner ---- New main inspections / safety checks or weight downgrades/upgrades are available on request. We are happy to assist you in obtaining export/transfer number plates, as well as transferring your purchased vehicles within Germany. Contact us! ---- We speak the following languages: German, English and Russian! ---- No liability for print & typographical errors, changes, prior sale, and errors excepted! --- Who are we? Leible Nutzfahrzeuge is a family-run business based in Kehl am Rhein. With many years of experience in the preparation and sales of commercial vehicles, we are a reliable partner for customers worldwide. Leible Nutzfahrzeuge's particular strength lies in the sale of new and used commercial vehicles. On an area of 11,000 sqm, we offer a wide range of vehicles. Our company philosophy is characterized by fairness and integrity. As customer satisfaction is our highest priority, we offer our customers an excellent all-round service package and provide them with a competent contact person who supports them during the purchase or sale of vehicles. See for yourself! Our service for you: Loading vehicles We are happy to assist you with the loading of your purchased vehicles. Organizing special transports We are happy to assist you in organizing special transports. Day registration/export number plates We are happy to assist you in obtaining export/short-term number plates. Handling customs formalities We are happy to assist you with customs matters.

Condition: excellent (used), For sale: professional ORION milling toolholder – German quality and precision. • Type SK40 Ø10-100 (Weldon) • Standard DIN 69871 AD/B – spindle-through coolant • Total length 100 mm • Tool clamping for Ø10 mm (side screw) • Includes tool – milling cutter / drill bit (visible in photo) • Very good condition, used, fully functional. ORION toolholders are an ideal solution for CNC machining centres and milling machines with SK40 taper. Iodpfx Aboxcgytjuoar

Condition: excellent (used), For sale: professional ORION milling holder – German precision and top-quality workmanship. • Type SK40 Ø8-100 K • DIN 69871 AD/B standard – central coolant supply through the spindle • Weldon clamping (side screw) for Ø8 mm tools • Total length 100 mm • Very good condition, used – fully functional • Complete with tool (milling cutter / drill as shown in the photo) Ideal for CNC machining centers and milling machines with SK40 taper. Iedjxcgygjpfx Abujar

Condition: good (used), Year of construction: 2021, DC motor, servo motor, geared motor, electric motor, DC geared motor, DC shunt-wound geared motor -Manufacturer of gearbox: Nord., type 1SI50F F i =15 -Speed: 200 rpm -Engine manufacturer: B&R Type 8LVA23.R0030D100-0 -Voltage: 57 V -Shaft: Ø 20 x 25 mm -Dimensions: 275/140/H175 mm Iajdpsyh Uhuofx Abujr -Weight: 7.2 kg

Condition: good (used), Year of construction: 2021, DC motor, servo motor, geared motor, electric motor, DC geared motor, DC shunt-wound geared motor -Manufacturer of gearbox: Nord., type 1SI50F F i =15 -Speed: 200 rpm -Engine manufacturer: B&R Type 8LVA23.R0030D100-0 -Voltage: 57 V -Shaft: Ø 25 x 50 mm -Dimensions: 275/200/H170 mm Iodpsyh Ai Tsfx Abuear -Weight: 7.5 kg

Year of construction: 2013, condition: used, functionality: fully functional, B+B Anlagenbau TR 100/200-P-V – Mechanical Dryer – Good Condition – Dismantled in Working Order For sale: B+B Anlagenbau type TR 100/200-P-V. The machine is in good condition and was dismantled while fully operational. Technically sound; only normal wear parts show wear. Worn wear parts: - Screens - Screen support edges (mounting frames) - Sealing rubbers Iaodpfsym Ag Eex Abujr The paddles inside the machine are still in good condition. A large number of spare paddles are included in the sale. Main drive motor: 55 kW Additional loose parts included: - Spare drive motor - Main bearing (2x) - Fan housing - Pulley - Gearbox for screen scraper drive Please note: No spare screens are included. However, contact details of the supplier for the screens and screen support edges will be provided. Machine is available immediately.

Condition: good (used), Servo drive, power supply module, control unit, converter, controller, servo module, axis amplifier, DC converter, inverter, control module -Manufacturer: B&R, Processor Controller with bus base -Type: X20 CP 0483 -Bus base: X20 BB 52 Iodjyhnb Dopfx Abuoar -Dimensions: 100/40/H80 mm -Weight: 0.3 kg.

Condition: good (used), Servo drive, power supply module, control unit, converter, controller, servo module, axis amplifier, DC converter, inverter -Manufacturer: B&R, ACOPOS micro 100D Servo inverter module -Type: 80VD1 00PD.C022-01 -Dimensions: 200/65/H105 mm -Weight: 0.9 kg. Iajdpfx Abjyhm Ngoujr

Condition: good (used), Servo drive, power supply module, control unit, converter, controller, servo module, axis amplifier, DC converter, inverter -Manufacturer: B&R, ACOPOS micro 100S Servo inverter module -Type: 80VD1 00PS.C02X-01 Ijdoyhmx Iepfx Abuoar -Dimensions: 200/65/H105 mm -Weight: 0.9 kg.

Condition: good (used), Year of construction: 2015, Servo drive, power supply module, control unit, converter, controller, servo module, axis amplifier, DC converter, inverter -Manufacturer: B&R, power supply module -Type: 80PS080X3.10-01 -Dimensions: 295/250/H70 mm Iodpfx Ajyhmf Uebusar -Weight: 3.5 kg.