Used Bender for sale (724)

Condition: good (used), Year of construction: 2009, actuation type: hydraulic, number of rollers: 4, roller (bottom) diameter: 760 mm, roller (top) diameter: 840 mm, side roll diameter: 610 mm, sheet thickness (max.): 100 mm, overall weight: 130,000 kg, total length: 7,500 mm, total width: 3,250 mm, total height: 4,250 mm, Equipment: cone bending device, hardened rollers, 4 roll plate bender HAEUSLER - VRM-HY MACH-ID 9183 Make: HAEUSLER Type: VRM-HY YOP: 2009 Force lower rol upper roll 1178 Ton Cone bending attachment Hardned and grounded rolls Width between upper and lower roll 200 mm Power 180 kW Rolling width: 3050mm Rolling thickness 3x toproll Ø:90mm Rolling thickness 5x toproll Ø:100mm Rolling thickness prebending: 80mm Top Roll Ø: 840mm Bottom Roll Ø: 760mm Side roll Ø: 610mm Number of rolls: 4 Rolling speed: 1,5 / 3 / 4,5 / 6 M/Min Adjustiment lower roll: 0 - 300mm/min. Dodpfxjz Sy U Is Aiijcp Number of driven rolls: 2 Power: 180kW Length: 7500mm Width: 3250mm Height: 4250mm Weight: 130000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), functionality: fully functional, Year of construction: 2002, control type: manual, degree of automation: semi-automatic, actuation type: electric, number of rollers: 3, roller diameter: 90 mm, working width: 1,550 mm, roller height adjustment: 110 mm, sheet thickness (max.): 3 mm, sheet thickness steel (max.): 3 mm, overall weight: 600 kg, total length: 2,300 mm, total width: 700 mm, total height: 1,150 mm, power: 1.1 kW (1.50 HP), input voltage: 400 V, input frequency: 50 Hz, Equipment: cone bending device, emergency stop, foot remote control, hardened rollers, swiveling upper roller, AKYAPAK AS 1550x90 sheet metal bending machine 1550mm x 2.5 mm, 3 rollers /ct2289/ Electric, pedal-operated rolling machine. Strong, robust construction. The upper roller can be rotated to remove the workpiece Convenient to use, suitable for workshops and industry Manufacturer: AKYAPAK AS 1550X90mm Year of manufacture: 2002 Bending Length: 1550 mm Bending capacity: 2.5 mm Roller diameter 90 mm - SAE 1050 certified high tensile steel rollers - Wire grooves at the ends of the rollers (4/6/9) mm - Motorized adjustable rear roller Dcsdpfx Aioxmvgkeiop - Mobile control panel with foot pedal - Precision bending with brake motor - Conical bending device - Manual folding end - Cast iron main frames Bending speed 6m / min Motor power 1.1 kW 50Hz 380v Wire groove diameter 4/7/10 mm Machine dimensions 2400x800x1200 mm Weight 600 kg

Condition: used, functionality: fully functional, PROFILE BENDER FOMP Dedpfx Aev Ifq Ejiiscp DIMENSIONS: 160X120X115 (h) cm, WEIGHT: 1300 KG

Condition: good (used), Year of construction: 2000, control type: NC control, controller manufacturer: Davi Smart, number of rollers: 4, roller (bottom) diameter: 340 mm, roller (top) diameter: 370 mm, side roll diameter: 320 mm, roller length: 3,100 mm, sheet thickness (max.): 25 mm, overall weight: 18,500 kg, total length: 5,900 mm, total width: 2,200 mm, total height: 2,300 mm, power: 30 kW (40.79 HP), Equipment: cone bending device, 4 roll plate bender Davi Promau - MCB-3037 Dcodpozi Ra Refx Aiisp MACH-ID 9751 Make: Davi Promau Type: MCB-3037 Control: Davi Smart Year: 2000 Conical bending attachment Extended roll end for section bending jobs Digital read out position side rolls Central lubrication CE-Declaration Rolling width: 3100mm Rolling thickness 3x toproll Ø:20mm Rolling thickness 5x toproll Ø:25mm Rolling thickness prebending: 22mm Top Roll Ø: 370mm Bottom Roll Ø: 340mm Side roll Ø: 320mm Number of rolls: 4 Rolling speed: 0-5 Adjustiment lower roll: 0-200mm/min. Adjustment side rolls: 0-200mm/min. Number of driven rolls: 2 Power: 30kW Length: 5900mm Width: 2200mm Height: 2300mm Weight: 18500kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: new, functionality: fully functional, Year of construction: 2026, control type: manual, degree of automation: semi-automatic, actuation type: electric, number of rollers: 3, roller (bottom) diameter: 59 mm, roller (top) diameter: 59 mm, side roll diameter: 59 mm, overall weight: 420 kg, total length: 1,700 mm, total width: 400 mm, total height: 1,100 mm, input voltage: 400 V, input frequency: 50 Hz, warranty duration: 12 months, Equipment: cone bending device, documentation/manual, emergency stop, foot remote control, hardened rollers, swiveling upper roller, MTP ESR 1300 × 1.5 mm – Electric 3-Roll Sheet Metal Bending Machine MACHINE IN STOCK – READY FOR IMMEDIATE DISPATCH Price: €2,080 net EXW European delivery available – transport quotation on request. The MTP ESR 1300 × 1.5 mm is a compact, electrically driven 3-roll sheet metal bending machine designed for rolling cylindrical parts, tubes, sleeves, rings and light conical components from sheet metal. The machine combines a rigid welded frame with hardened, high-quality steel rolls and simple mechanical adjustment. It is suitable for workshops, metal fabrication companies, maintenance departments and small/medium production facilities. MAIN TECHNICAL DATA • Working length: 1300 mm • Maximum sheet thickness: 1.5 mm • Roll diameter: 59 mm • Motor power: 0.75 kW • Dimensions: 1700 × 400 × 1100 mm • Weight: approx. 420 kg • System: 3 rolls • Drive: electric • Condition: brand new MACHINE FEATURES The machine uses a three-roll bending system with eccentric pressure adjustment. The upper and lower rolls are manufactured from high-grade hardened steel, providing good wear resistance and stable forming accuracy. The rolls are equipped with grooves for rolling rings and wire-type sections. The machine can also be used for basic cone rolling within its standard adjustment range. The photographs show a robust and straightforward mechanical construction with: • manual handwheel and lever adjustment, • electrically driven roll rotation, • front-mounted control panel, • emergency stop button, • foot pedal operation for convenient starting and reversing of the rolling process, • safety cord / perimeter emergency protection, • solid floor-standing frame, • accessible mechanical components for easy adjustment and maintenance. Foot control allows the operator to keep both hands free for positioning and guiding the sheet during forming, which is especially useful when working with larger panels. APPLICATIONS Dedpfx Ajz Hx Eaeiijcp Suitable for producing: • cylindrical sheet-metal components, • pipes and sleeves, • rings, • curved panels, • light conical parts, • workshop and fabrication components. SALES & SUPPORT We provide professional technical advice before purchase and comprehensive after-sales support. We can assist with machine selection, rolling technology and correct working parameters for different materials. We provide warranty and post-warranty service and can organise professional transport throughout Poland and the whole of Europe. The machine is brand new, CE marked, covered by the manufacturer’s warranty and available immediately from stock. Please contact us for delivery costs, additional technical information, photos or a commercial quotation.

Condition: excellent (used), Year of construction: 2010, control type: CNC control, actuation type: hydraulic, controller manufacturer: Beckhof, number of rollers: 4, roller (bottom) diameter: 1,450 mm, roller (top) diameter: 1,500 mm, side roll diameter: 1,100 mm, sheet thickness (max.): 300 mm, overall weight: 802,000 kg, total length: 15,000 mm, total width: 7,200 mm, total height: 7,800 mm, 4 roll plate bender HAEUSLER - VRM-HY 3600/300mm MACH-ID 9870 Make: HAEUSLER Type: VRM-HY 3600/300 Control: BECKHOF YOP: 2010 WORLDWIDE UNIQUE OPPORTUNITY – ONE OF THE LARGEST AND MOST POWERFUL 4-ROLL PLATE BENDING MACHINES EVER BUILT BY HAEUSLER 3600 x 300 mm Mach4Metal is proud to announce the acquisition of one of the largest and most powerful 4-roll plate bending machines ever manufactured by HAEUSLER, Switzerland. Only two identical machines of this exceptional size and capacity were ever built. The second machine is installed at Dillinger Hütte in Germany. With a total weight exceeding 800 tonnes, an extraordinary pressing force of more than 7,000 tonnes from the lower roll against the upper roll, and a plate rolling capacity of up to 300 mm thickness, this machine represents the highest level of heavy-duty plate forming technology. A RARE OPPORTUNITY FOR MANUFACTURERS OPERATING IN THE WORLD'S MOST DEMANDING INDUSTRIES. This extraordinary machine is particularly suitable for manufacturers specialising in: Nuclear energy – Small Modular Reactors (SMR) and Advanced Modular Reactors (AMR) Nuclear reactor pressure vessel components Heavy-wall pressure vessels and high-pressure systems Heavy industrial components requiring extreme plate thickness and forming forces Machines of this size and capacity are extremely rare on the worldwide market. Engineering and manufacturing a comparable new machine would require a substantial investment and a significant delivery period. Mach4Metal offers the opportunity to acquire this remarkable machine with immediate availability. For companies planning to expand their production capabilities in nuclear energy, power generation, offshore construction or heavy pressure vessel manufacturing, this could be a once-in-a-generation investment opportunity. If your company is active in SMR/AMR technology, nuclear power generation, pressure vessel manufacturing, heavy boiler production or offshore fabrication, we invite you to contact Mach4Metal. ONE OF ONLY TWO IDENTICAL MACHINES EVER BUILT. EXCEPTIONAL CAPACITY. IMMEDIATE AVAILABILITY. WORLDWIDE DELIVERY. Rolling CANS, VESSELS, BOILERS Components for SMR / AMR steam drums, high-pressure systems Small Modular Reactors and Advanced Modular reactors  Power generation sector; Offshore Market Dedpfx Aj Ad Uk Toiiocp Rolling width 3650mm Rolling thickness 3x toproll Ø:250mm Rolling thickness 5x toproll Ø:300mm Rolling thickness prebending: 270mm Top Roll Ø: 1500mm Bottom Roll Ø: 1450mm Side roll Ø: 1100mm Number of rolls: 4 Rolling speed: 1,2 + 2,4 + 3,6 M/Min Number of driven rolls: 2 Power: 700kW Length: 15000mm Width: 7200mm Height: 7800mm Weight: 802000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, Year of construction: 2008, pipe diameter (max.): 20 mm, pipe length (max.): 3,000 mm, bending radius (max.): 45 mm, overall weight: 180 kg, total length: 3,300 mm, total height: 1,150 mm, operating pressure: 125 bar, Equipment: documentation/manual, emergency stop, foot remote control, quick-change device, We are offering this used TRACTO-TECHNIK TB20D mandrel bending machine for sale. Serial number: TB20D 2110608 Year of manufacture: 2008 For sale is a mandrel bending machine, type: Tracto-Technik Tubobend TB20D, 3000 mm, from its first owner. The machine was purchased new by us in 2008 and has been in our possession ever since. It is fully operational and can be demonstrated under power upon prior arrangement. The TUBOBEND 20 mandrel bender is a pipe bending machine with a free bending head for processing pipes in all planes. It is designed for work involving adjustments according to drawings or samples, as well as for series production. With the TUBOBEND 20 mandrel bender, precision steel pipes according to DIN 2391/C, material St 35.4 NBK (hydraulic pipes), 6-16 mm diameter can be processed. The processing of other pipe qualities and dimensions is also possible. The mandrel system allows for the smallest technically feasible radii to be achieved. If required, a folding smoother can also be used. The bending unit is designed in such a way that even serpentine (meander) bends can be made. Dimensions: L x W x H in mm 920 x 720 x 1800 (without stop device) Machine lower part 630 x 550 x 700 Machine upper part 920 x 720 x 500 Dcsdpfxs Abbmpo Aiiop Weights: Total weight approx. 180 kg (without stop device) Machine lower part with hydraulic unit approx. 74 kg Safety device: - Emergency stop button: A central emergency stop button for the TUBOBEND 20 is located on the control panel. Safety cover with electrical shut-off in the hazard area of the bending arm. Description and overview: The TUBOBEND 20 mandrel bender is a small, mobile, compact pipe bending machine that can be easily disassembled into two main components for transport purposes. The bending head can be swivelled from the vertical to the horizontal position. The pipe feed length is 1500 or 3000 mm. Extensive scope of supply (a very large number of tools included!): An advantage of this offer is the extensive tool package, which is completely included in the price: see separate list. Documentation: Original operating manual is complete. EC Declaration of Conformity available. Note: The machine will only be sold as a complete package together with the complete set of tools according to the attached list. Sales and delivery conditions: • Pricing: Ex works (net, plus VAT). • Logistics: Dismantling, loading and collection must be organized and carried out by the buyer himself or by a shipping company commissioned by him. Technical data according to available documents. Subject to prior sale.

Condition: excellent (used), Year of construction: 2010, control type: CNC control, controller manufacturer: Beckof, number of rollers: 4, roller (bottom) diameter: 1,450 mm, roller (top) diameter: 1,500 mm, side roll diameter: 1,100 mm, sheet thickness (max.): 300 mm, overall weight: 819,000 kg, total length: 15,000 mm, total width: 7,200 mm, total height: 7,800 mm, 4 roll plate bender HAEUSLER - VRM-HY 4000/300 MACH-ID 9871 Make: HAEUSLER Type: VRM-HY 4000/300 Control: BECKHOF YOP: 2010 Minimum mending diameter 1720 mm Distance Top to Lower roll 300 mm Pressing force Lower to upper roll 7200 Ton Roll quality 60CrMoV 12.5 with strength 900-1050 Nm/mm2 Controll panel with Bend-iT (Beckhoff) Largest machine build ever by haeusler (1 off 2 in World) Rolling CANS, VESSELS, BOILERS Components for SMR / AMR steam drums, high-pressure systems Small Modular Reactors and Advanced Modular reactors Power generation sector ; Offshore Market Rolling width: 4000mm Rolling thickness 3x toproll Ø:250mm Rolling thickness 5x toproll Ø:300mm Rolling thickness prebending: 270mm Top Roll Ø: 1500mm Bottom Roll Ø: 1450mm Side roll Ø: 1100mm Number of rolls: 4 Rolling speed: 1,2 + 2,4 + 3,6 M/Min Number of driven rolls: 2 Power: 700kW Length: 15000mm Width: 7200mm Dcodo Ad Uccepfx Aiijp Height: 7800mm Weight: 819000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: new, functionality: fully functional, Year of construction: 2026, tube bender R2 ZOPF - without bending tooling - with foot pedal and emergency stop - without tooling - control unit - 100 programs of 9 bends each - precise electronic control of C-shaft - manual and automatic bending mode - bending angle and springback angle are programmable by means of a microprocessor - rapid engagement and disengagement of the tooling - scale for counterbending holder - movable - dimensions 930x410x1000 mm - weight 280 kg - motor 1,5 Kw - 400 V 50 Hz 3 ph. - bending radius R55 - R340 mm - bending capacity of tube Ø 5 mm to 60 mm Dcedpfjdkxkxjx Aiisp - max. Bending angle of 210 °

Condition: as good as new (ex-display), Year of construction: 2007, I - beam section - flat steel 50 x 10 mm I-beam section - upend 80 x 15 mm L-beam 50 mm round material 30,0 mm bar material dia. max. 1 1/2" mm bar material - diameter 30,0 mm weight 185 kg Dodjt U R H Uspfx Aiiocp range L-W-H 670 x 530 x 1350 mm square material 40 x 40 x 3 mm pipes 60 x 2,0 mm Thickness of tenon 30 mm total power requirement 0,75 kW Demonstration device Equipment: • Base frame of the machine • Foot switch • Standard-rolls (divided) • Possible to bend horizontally and vertically • machine has only one drive (right-left-run)

Condition: used, Year of construction: 1999, sheet width 2050 mm plate thickness 4 mm Dcsdeztfxiepfx Aiiop total power requirement 3 kW weight of the machine ca. 2 t

Condition: like new (used), Year of construction: 2025, Tube Bender BB 76 without mandrel without tooling - model BB 76 Dcsdpfxodihnue Aiiep - capacity up to 76 x 4 mm round tube mild steel - digital readout - bending angle programable - with foot pedal - bending speed 1 - 3 rpm - stepless speed - motor 4 KW 400 volt 50 hz 3 ph. - all shafts and necessary parts are heat treated and grinded - monoblock body CK 45 - weight 600 kg - dimensions 600x1100x1000 mm

Condition: excellent (used), Year of construction: 2005, Technical specifications: Working length: 3100 mm Max. bending capacity: 20.0 mm Bending allowance: 15.0 mm CNC control: SIEMENS Simatic Diameter of all rollers: 350 mm Dedpfe Afby Rjx Aiiecp Hydraulic folding bearing Control panel with digital display Motor power: 15 kW CE marking Dimensions (length x width x height): approx. 6900 x 2000 x 2450 mm Weight: approx. 21 tons Accessories: Bending aid at the top and on the side The seller is not liable for typographical or data transmission errors. The machine’s appearance, technology, and wear are consistent with its age; used machines are sold without any warranty.

Year of construction: 2012, condition: ready for operation (used), I sell a used bender for double glazing frames. Dcsdjncd Dqjpfx Aiisp

Condition: new, Year of construction: 2025, operating hours: 30 h, Panel benders (also known as swing bending machines or folding machines for sheet metal) are used across various industries where precise, automated bending of sheet metal components is required. The main sectors include: 🏭 Metalworking & Sheet Metal Processing Contract manufacturers / Sheet metal processing companies Series and single-part production Enclosures, housings, cassettes, boxes Dcsdsyb Hu Nopfx Aiijp 🚗 Automotive Industry & Suppliers Structural and body components Brackets, covers, interior components Especially suited for mass production requiring consistent repeatability ⚡ Electrical Engineering & Electronics Switchgear and distributor manufacturing Enclosures for controls, servers, industrial electronics Very common use due to numerous 90° bends and complex contours ❄️ Household Appliances & White Goods Washing machines, refrigerators, ovens Internal frames, covers, claddings 🏗️ Construction Industry & Architecture Facade elements Roof and wall claddings Metal panels, cassettes 🚆 Transport & Public Transit Rail vehicles, buses, commercial vehicles Interior claddings, technical housings 🛠️ Mechanical & Plant Engineering Machine frames Protective claddings Switchgear enclosures 🌬️ HVAC / Air Conditioning Technology Ventilation ducts HVAC unit enclosures Air distribution systems 🏥 Medical Technology Equipment enclosures Stainless steel claddings High requirements for precision & surface finish Why Panel Benders in these sectors? ✔ High degree of automation ✔ Excellent repeat accuracy ✔ Ideal for complex bent parts ✔ Gentle processing of painted or coated sheets ✔ Fast processing for small to medium batch sizes

Condition: refurbished (used), functionality: fully functional, Year of construction: 1991, machine/vehicle number: plate roll 4roll 3000x13 mm, control type: manual, degree of automation: manual, actuation type: hydraulic, number of rollers: 4, roller (bottom) diameter: 260 mm, roller (top) diameter: 280 mm, side roll diameter: 220 mm, roller diameter: 330 mm, roller length: 3,050 mm, working width: 3,000 mm, working height: 800 mm, sheet thickness (max.): 13 mm, sheet thickness steel (max.): 13 mm, sheet thickness stainless steel (max.): 13 mm, sheet thickness aluminum (max.): 18 mm, sheet thickness brass (max.): 18 mm, sheet thickness copper (max.): 18 mm, overall weight: 7,000 kg, total length: 5,000 mm, total width: 1,500 mm, total height: 1,500 mm, power: 7.35 kW (9.99 HP), input voltage: 380 V, input frequency: 50 Hz, number of digital displays: 2, Equipment: cone bending device, documentation/manual, emergency stop, hardened rollers, swiveling upper roller, MCB3028 4 roll hydraulic plate bending machine capacity 3000x13 mm Make Davi Italy - year 1991 Plate width 3000 mm Plate thickness 13 mm Pre-bending 10 mm top roll size 280 mm pinch roll 260 mm Electric power Hp 10 380/50 Vac Configuration installed: -Hardened rolls -Conical hydraulic attachment -Digital position readouts infinitely variable speed control via hydraulic lever distributor Driven rollers rotation with axial gearbox each roll central independent front open hydraulic drop-end to unload closed shells machine operating console centralized fully hydraulic -Extended rolls front shafts Dcedpfo Aa Nm Uox Aiisp -one plus station hydraulic to connect an external tool support ---- Machine used refurbished and repainted, rollers surface cleaned, functional all controlled. Manuals and schematics original documents with the machine. Layout 5000x1500xH1500 mm weight 7000kgs

Condition: excellent (used), Year of construction: 1988, control type: NC control, actuation type: hydraulic, number of rollers: 4, roller (bottom) diameter: 370 mm, roller (top) diameter: 370 mm, side roll diameter: 280 mm, sheet thickness (max.): 20 mm, overall weight: 13,500 kg, total length: 6,900 mm, total width: 2,100 mm, total height: 2,100 mm, New ( 2026) Digital read out position side rolls Hydraulic drop end Minimum bending diameter 420 mm Full hydraulic machine Roll quality C60 900N/mm2 Rolling width: 3100mm Rolling thickness 3x toproll Ø:15mm Rolling thickness 5x toproll Ø:20mm Rolling thickness prebending: 12mm Top Roll Ø: 370mm Bottom Roll Ø: 370mm Side roll Ø: 280mm Number of rolls: 4 Dedpfx Aiszxxgwsiocp Rolling speed: 0 - 4 Adjustiment lower roll: 0 - 700mm/min. Adjustment side rolls: 0 - 200mm/min. Number of driven rolls: 2 Power: 15kW Length: 6900mm Width: 2100mm Height: 2100mm Weight: 13500kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, functionality: fully functional, Year of construction: 2007, Plate bending machine: Birlik KSM 1280X1 plate bending machine type: KSM year of manufacture: 2007 Dcjdpfx Aow Ty Duoiijp bending length: 1300 bending capacity: 1mm roller diameter: 2x90mm, 1x50mm cone bending equipment mains voltage: 400v 50Hz 0.75kw foot pedal operation. Currently, a gear motor with a higher speed than the standard is installed. machine length: 1900mm machine width: 550mm height: 1300mm weight: 300 kg high-strength rollers according to SAE 1050 certificate

Condition: used, Year of construction: 1989, Schäfer SVRM 3500/12 - CNC 4-Roller Plate Bending Machine - Siemens CNC control with joystick for roller positioning and digital display (upgraded in 2006) - Hydraulic tilting of the top roller via control panel - Rollers made of hardened material with a strength of 900 N/mm² - Year of manufacture: 1989 Technical Data - Max. sheet width: 3500 mm Dcodpfx Ajylyh Doiisp - Roller barrel length: 3550 mm - Max. sheet thickness (bending): 12 mm - Max. sheet thickness (pre-bending) 4xS/3xS: 8 / 6 mm - Max. yield limit of sheets at 20% cold work hardening: 380 N/mm² - Top & bottom roller diameter: 360 mm - Side roller diameter: 290 mm - Smallest achievable bending radius: 220 mm - Feed speed, bottom roller: 200 mm/min - Feed speed, side rollers: 700 mm/min - Total installed power: 22 kW - Electrical system: 380 V / 50 Hz / 3 Ph - Space requirements including control, hydraulics & roller conveyor (WxHxD): approx. 7900 x 3300 x 4600 mm - Pit depth: 900 mm - Machine weight: 21,100 kg

Condition: used, functionality: fully functional, USED PROFILE BENDING ROLL BENDER - SOMO SHAFTS UP TO 105mm. WEIGHT 5000 KG. Djdezh D T Iopfx Aiijcp

Condition: used, functionality: fully functional, ---EURING PROFILE BENDER CM 2000 (N.1), SHAFT 30, 2 ROLLER DRIVES. DIMENSIONS: 70X55X145 (h) cm, Weight: 200 kg Dcedpswn Hz Refx Aiiop ---EURING PROFILE BENDER CM 2000 (N.2), SHAFT 30, 2 ROLLER DRIVES. DIMENSIONS: 70X55X145 (h) cm, Weight: 200 kg

Condition: ready for operation (used), functionality: fully functional, Plate rolling machine, 3000 mm capacity, H. Vuillot 3000 mm, used machine Manufacturer: H. Vuillot Sheet capacity: 3000 x 27 mm Top roll diameter: Ø445 mm Bottom roll diameter: Ø330 mm Dcsdpfxjwcqpnj Aiiop Year: 1972

Year of construction: 1978, condition: good (used), Make: HAEUSLER Type: VRM-HY Year: 1978 Specifications Metric US Standard Rolling width 3050 mm Rolling thickness 3x toproll Ø 60 mm Rolling thickness 5x toproll Ø 70 mm Rolling thickness prebending 50 mm Top Roll Ø 630 mm Bottom Roll Ø Dedpfskvm S Nox Aiiscp 600 mm Side roll Ø 500 mm Number of rolls 4 Rolling speed 0 - 5 Adjustiment lower roll 200 mm/min. Adjustment side rolls 200 mm/min. Number of driven rolls 2 Power 120 kW Dimensions (Estimate) Length 5790 mm Width 4200 mm Height 4200 mm Weight 85000 kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, Year of construction: 2015, Working length: 1270 mm Roller diameter: 120 mm Maximum sheet thickness: 4.5 mm Sheet thickness for bending: 4 mm Electrical connection: 400 V, 2.2 kW Dedpfxez Erabj Aiijcp Weight: 1250 kg Space requirement: 2300 x 800 x 1100 mm with hardened rollers

Condition: new, functionality: fully functional, Year of construction: 2026, control type: manual, degree of automation: semi-automatic, actuation type: electric, number of rollers: 3, roller (bottom) diameter: 60 mm, roller (top) diameter: 60 mm, side roll diameter: 60 mm, overall weight: 310 kg, total length: 1,300 mm, total width: 700 mm, total height: 1,260 mm, power: 0.75 kW (1.02 HP), input voltage: 400 V, input frequency: 50 Hz, warranty duration: 12 months, Equipment: cone bending device, documentation/manual, emergency stop, foot remote control, hardened rollers, swiveling upper roller, MTP ESR 1020 × 2.0 mm – Electric 3-Roll Sheet Metal Bending Machine PRICE: €1950 NET EXW European delivery available – transport quotation on request. The MTP ESR 1020 × 2.0 mm is a robust electrically driven 3-roll sheet metal bending machine designed for accurate rolling of cylindrical components, tubes, sleeves, rings and light conical parts. Its compact footprint, rigid welded frame and hardened steel rolls make it suitable for professional fabrication workshops, maintenance departments and production facilities requiring a reliable machine for regular sheet-metal forming work. MAIN TECHNICAL DATA • Working length: 1020 mm • Maximum sheet thickness: 2.0 mm • Roll diameter: 60 mm • Motor power: 0.75 kW • Power supply: 400 V • Dimensions: 1300 × 700 × 1260 mm • Weight: approx. 310 kg • Number of rolls: 3 • Drive: electric • Condition: brand new MACHINE FEATURES The ESR 1020 × 2.0 mm uses a three-roll system with eccentric pressure adjustment, allowing straightforward positioning of the rolls and controlled forming of the workpiece. The rolls are manufactured from high-grade hardened steel, providing good durability and resistance to wear. The lower and upper rolls are equipped with grooves for rolling rings and wire-type sections. The machine can also be used for cone rolling within its standard adjustment range. As shown in the photographs, the machine features: • heavy-duty welded steel frame, • electric motor with reduction gearbox, • manual handwheels and levers for precise mechanical adjustment, • easy roll-position adjustment, • swing-out / releasable upper-roll arrangement for easier removal of finished cylindrical workpieces, • foot pedal for convenient forward/reverse operation, • emergency stop button, • perimeter safety cord around the working area, • clearly accessible operating controls, • CE marking and safety warning labels. The foot-operated control allows the operator to keep both hands free for positioning and guiding the sheet during the rolling process, improving control when working with larger workpieces. APPLICATIONS Suitable for producing: • cylindrical sheet-metal parts, • tubes and sleeves, • rings, • curved panels, • light conical components, • general fabrication and workshop components. SALES & SUPPORT Dcsdjz Hx T Repfx Aiiep We provide professional technical advice before purchase and comprehensive after-sales assistance. We can help with machine selection, rolling technology and suitable operating parameters for different materials. Warranty and post-warranty service are available, and we can organise professional transport throughout Poland and the whole of Europe. Brand-new machine with manufacturer’s warranty. Available to order. Please contact us for current delivery time, transport costs, additional photographs, technical information or a personalised commercial quotation.