Used Band Display for sale (11,652)

Condition: new, CATALOG NUMBER HL001 - New machine, in stock – Pre-milling unit – Radial scraper + polishers TECHNICAL DATA - Panel thickness: 45mm - Edge thickness: 0.4 mm – 3 mm - Min panel width: 90mm - Min panel length: 90mm - Feed speed: 7m/min - Pre-milling: 9000 rpm - Top/bottom: 10500 rpm - Front/back: 8800 rpm - Polishing: 2800 rpm - Main motor: 6kW - Feed power: 0.75kW - Pre-milling power: 1.5kW - Glue spindle power: 0.25kW - Top-bottom milling power: 0.18kW - Top milling power: 0.55kW - Top polishing motor: 3-phase 0.12 kW, 1-phase 0.18 kW - Bottom polishing motor: 3-phase 0.12 kW, 1-phase 0.18 kW - Working table height: 856mm, extended support width: 560mm - Extraction connection: 3x100mm - Dimensions (L/W/H): 3200/1200/1200mm, weight: 660kg Net price: 49,900 PLN Net price: 11,880 EUR based on 4.2 EUR exchange rate (Prices may change with significant fluctuations) Ijdpfszccuuex Abnetk

Condition: used, functionality: fully functional, machine/vehicle number: 82415, type of input current: three-phase, total width: 1,500 mm, total length: 2,500 mm, input voltage: 400 V, input current: 16 A, cutting height (max.): 100 mm, 114 A – BERGMAN & JOHANSSON 420 Bandknife Fabric Cutting Machine – Industrial Precision Cutting Unit Isdoy Au Hqepfx Abnstk Description For sale is a Bergman & Johansson industrial bandknife fabric cutting machine, model Type 420, manufactured in Sweden. This machine is designed for high-precision cutting of stacked textile materials using a continuous vertical bandknife system. It is a core component in professional garment cutting rooms, especially suited for detailed shaping of components such as collars, sleeves, and smaller pattern pieces. The system has been used as part of a dedicated cutting workflow together with Finn-Convey spreading tables (unit 22 C), enabling efficient transition from fabric spreading to precision cutting. The long-arm C-frame construction allows handling of large fabric stacks, while maintaining excellent control and cutting accuracy. The machine was in production use prior to factory shutdown and has been serviced on 27.02.2026. Technical Details • Manufacturer: Bergman & Johansson i Borås AB, Sweden • Model: Type 420 • Band length: approx. 4200 mm • Serial number: 82415 • Machine type: Industrial bandknife fabric cutting machine Motor Specifications • Manufacturer: Leroy-Somer • Type: LS 80 P • Power: 0.75 kW • Speed: approx. 1410 rpm • Voltage: 380–400 V (3-phase, star connection) • Current: approx. 2.0 A (Y) / 3.45 A (Δ) • Frequency: 50 Hz • Protection class: IP54 Machine Features • Continuous vertical bandknife for precision cutting • Long-arm (C-frame) design for large cutting areas • Integrated cutting table with smooth surface • Adjustable blade guard for safety and accuracy • Built-in sharpening system for continuous blade maintenance • Heavy-duty industrial construction • Mobile base with wheels for flexible positioning Cutting Capabilities • High-precision cutting of multi-layer fabric stacks • Suitable for both straight and complex contour cutting • Ideal for detailed garment components and templates • Clean and accurate cuts across various textile types System Characteristics • Table-based cutting process, material is guided manually • Optional air table functionality (depending on configuration) to reduce friction • Stable blade tracking and tension system for consistent performance • Designed for continuous industrial operation Condition Used industrial condition Serviced on 27.02.2026 Machine was operational prior to factory shutdown Typical wear consistent with industrial use Inspection possible prior to dismantling Sold as-is, where-is, without warranty Applications • Precision cutting of fabric stacks • Garment component cutting • Denim and workwear production • Textile cutting rooms • Small to mid-scale production setups Location Valga, Estonia Dismantling & Transport Buyer responsible for dismantling and transport Professional dismantling recommended

Condition: excellent (used), Double side - Independent Machine (or 1st and/or 2nd in a line) Edges (band in rolls) thickness (Min/Max) mm 0,3 / 3 Panels thickness (min/max) mm 12 - 40 Working width (min/max) mm 250 / 2500 Numerical Control /Software Power Control 22 / woodCommander Adjustable feeding speed (m/min) 15 - 35 Safety and sound-proof enclosures/cabins Distance (center-axes) of the Disappearing Dogs (mm) 1000 SIZING PART (for each side): Spraying unit (Anti-sticking liquid) Anti-chipping Milling Unit (1 x Kw 4,5) Hogging Units KD 11 (2 x Kw 6,6) EDGE-BANDING PART (for each side): Glueing Unit (Hot Melt + Quick Melt Unit) A3 Pressure zone A Edge coils supporting unit (No. 2 of reels) with servo-assisted edge feeding Snipping Unit HL86 (2 x Kw 0,22) Rough Trimming Unit BF10 (2 x Kw 0,55) Fine Trimming Unit PF20 (2 x Kw 0,4) FRRE SPACE for Corner Rounding unit ( Contour Trimming) FF 12 (2 x Kw 0,4) Profile Scraping unit PN 10 Finish processing unit (Glue scraper + Buffing unit) FA 11 Spraying Unit (for polishing liquid) Ijdpfx Abezrd Rzenstk

Condition: excellent (used), Double side - First (1st) machine in a line Machine Edges (band in rolls) thickness (Min/Max) mm 0,3 / 3 Itsdpfx Abezrd Nqsnek Panels thickness (min/max) mm 12 - 40 Working width (min/max) mm 195 / 1500 Numerical Control /Software Power Control 22 / woodCommander Adjustable feeding speed (m/min) 15 - 32 Safety and sound-proof enclosures/cabins SIZING PART (for each side): Spraying unit (Anti-sticking liquid) Hogging Units KD 10 (2 x Kw 6,6) EDGE-BANDING PART (for each side): Glueing Unit (Hot Melt + Quick Melt Unit) A3 Pressure zone A Edge coils supporting unit (No. 2 of reels) with servo-assisted edge feeding Rough Trimming unit BF10 (2 x Kw 0,55) Fine Trimming unit PF20 (2 x Kw 0,4) FRRE SPACE Milling grooving unit UF 11 (1 x Kw ?) Profile Scraping unit PN 10 Finish processing unit (Glue scraper + Buffing unit) FA 11 Spraying Unit (for polishing liquid)

Condition: as good as new (ex-display), 4-SIDE EDGE BANDING LINE + DRILLING Workpieces dimensions: min. mm 195 x 250 x 60 / max. mm 1200 x 2500 x 60 Itjdpfx Aozrd Dhobnsk Composed of the following machines: 202005a) 1st Double-side Sizing & Edge Banding machine "HOMAG" Mod. KFL 325/ M1 / C 202005b) Turning Station "HOMAG" Mod. TDL (from lengthwise to crosswise) 202005c) 2nd Double-side Sizing & Edge Banding "HOMAG" Mod. KFL 326/ M2 / C 202005d) Connecting Roller Conveyor 202005e) Automatic (through-feed) Multi Borer "WEEKE" Mod. BST 503

Condition: used, Year of construction: 2016, Industrial automatic edge banding machine SOLUTION XD KEY FEATURES "E-TOUCH" CONTROL WITH AUTOMATIC PROGRAMMING: A SINGLE "TOUCH" IS ALL IT TAKES TO OPERATE THE MACHINE STANDARD PRESSURE DEVICE WITH DRIVE BELT FOR OPTIMAL PANEL GUIDANCE EDGE BANDING OF ROLL MATERIAL, STRIP EDGES AND SOLID WOOD EDGES GENERAL FEATURES Single-sided edge banding machine in left-hand version for edge banding of roll material and strip edges with all conventional hot melt adhesives. The base frame consists of a stable steel welded frame with higher rigidity, which provides optimal support for the installation of the processing units. The upper pressure beam consists of a thick-walled steel profile and a double trapezoidal drive belt, which is automatically positioned according to the panel thickness. Height adjustment with display on the upper pressure beam and on the operator panel. Manual workpiece feeding system with a large-sized work area and increased support surface facilitates the feeding of large workpieces. Adjustable infeed fence for two positions with automatic selection for processing with or without a pre-milling unit. Upper working units are attached to the pressure beam and mechanically connected to ensure automatic adjustment when changing panel thickness. Lower working units are attached to the machine frame or to the longitudinal support for precise referencing to the panel. All high-frequency motors are operated via frequency inverters. Each unit is equipped with its own inverter for optimal flexibility and improved machine production times. Protective hood for all units positioned after the glue application unit. Polycarbonate windows ensure a good view of the units during processing. Interior lighting of the hood. Protective hood with sound-absorbing material for lower noise emissions during operation. Spacer on the infeed fence allows the machine to be fed with the correct spacing. The spacing is automatically adjusted to the selected feed rate. Dust extraction port arranged on the pivoting control panel, positioned in the infeed area, is adjustable for ergonomic operation. The electrical system complies with current regulations. Electrical components are housed in a metal housing, attached to the machine frame and equipped with doors for easy access in case of maintenance. Standard voltage is 400 V EU 50 Hz (with neutral conductor). Material feed is via a feed chain with 80 mm wide chain plates made of rubberized nylon, for optimal guidance and high load capacity. The chain slides on 2 guides made of hardened and ground steel, one round and one flat guide, to guarantee straight feed and to protect against lateral displacement. Automatic chain lubrication. The amount of lubricating oil is optimized by the control system depending on the panels being processed. External support roller track positioned along the entire length of the machine; consisting of an extendable opening system up to 650 mm (for panels with a maximum width of 1200 mm). E-TOUCH PC control system for quick and easy execution of the main functions of the machine. Includes: – Processing of programs in Just in Time mode – Possibility of management via bills of materials – Possibility of management by Itjdpfx Abjxy Tm Isnjk

Condition: used, Year of construction: 1980, Roll diameter: 600 mm Cutting height: 385 mm Motor power: 2.2 kW Table tiltable Table size: 540 x 600 mm Total height: 2100 mm Weight: approx. 260 kg Storage location: Nattheim Iodpfx Abjw D Aybsnstk

Condition: used, Year of construction: 1992, Wheel diameter: 500 mm Band guidance above and below Tilting table Location: Nattheim Itodpfjw D Aw Hsx Abnek

Condition: excellent (used), Year of construction: 2021, Huber CenterMax band screen for (waste) water inlet Chamber opening: 600mm Screening width: 600mm Discharge height to bottom: 6722mm Itedoy Tmbbopfx Abnsk Machine height above bottom: 8642mm Perforated plate: 2mm

Condition: excellent (used), Year of construction: 2023, machine/vehicle number: 0-200-87-0913, functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, edge thickness (max.): 3 mm, height adjustment type: electric, total length: 10,825 mm, Equipment: documentation/manual, Used single-sided HOMAG edge-banding machine for straight edges – EDGETEQ S-500 For pre-milling (jointing trimming), gluing and post-processing of various kinds of edging materials. Fixed stop on the left side. Ijdsztpw Nepfx Abnotk Year of Manufacture: 2023 EQUIPMENT / SPECIFICATION BASIC MACHINE - with 80 mm wide conveyor chain with rubber-coated chain pads, - workpiece thickness 8 to 60 mm - top pressure with compound V-belt, automatic height adjustment (to workpiece thickness) - panel support with roller guide, extractable approx. 700 mm - glue roller drive in case of feed stop - hand switch /remote control for setup – mode - adjustable infeed fence with NC-axis (CAN-bus) - Jointing trimming 2 motors each 3 kW (clockwise, counterclockwise), jumping function GLUING SECTION V20, consisting of: - QA65 glue application unit, with PTFE-coating (Teflon), with pneumatically operated glue gates - pneumatic clamping of glue application - Pre-melter for PUR glues - Edge magazine, edge thickness min. 0,4 mm to max. 3 mm Edge width (height) max 65 mm - 2-fold automatic edge roll changing magazine - Pressure zone with automatic horizontal adjustment (NC CAN-axis) to edge thickness, 1 driven & 4 non-driven pressure rollers. POST-PROCESSING SECTION: - Snipping (end-trimming) unit PK25 horizontal, 2 motors, with straight/chamfer cutting function - Edge Trimming MS40 2x0.55 kW, top/bottom - Multifunction Corner Rounding MF60, 2 motors 0.4 kW (top/bottom) with linear motors, soft-touch - Profile (radius-) Scraping MN11, multi scraping tool, automatic positioning and adjustment (NC) - Flat Scraping (glue joint) FA20, top/bottom, (version with 3 tracer rollers), automatic adjustment - Buffing Unit FP10, top/bottom Control / software: - powerControl PC 23 PowerTouch - woodCommander 5 - Edge sequence control - change-over in the gap Machine dimensions 1085 x 180 x 235 cm (with opened doors)

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, control type: CNC control, actuation type: pneumatic, rotational speed (max.): 3,000 rpm, overall weight: 640 kg, Equipment: CE marking, documentation/manual, The MACC TA 400 A CNC is an automatic circular saw designed for cutting aluminium and non-ferrous materials in industrial serial production. Main Technical Data Parameter Value Itodpfey Uvqzsx Abnjk Machine Type Automatic CNC circular saw for aluminium Blade Diameter Ø 400 mm Blade Bore 32 mm Motor Power 2.2 kW Power Supply 3 × 400 V Blade Speed 3000 rpm Vice Opening 180 mm Cooling System Emulsion cooling system Clamping System 2 pneumatic vices Weight Approx. 510–640 kg Machine Dimensions Approx. 3450 × 1700 × 1420 mm Cutting Capacities at 90° Profile Type Capacity Solid Round Material 60 mm Tube / Round Profile 140 mm Square Profile 110 × 110 mm Rectangular Profile 180 × 100 mm

Condition: excellent (used), Year of construction: 2010, Band saw Manufacturer: HEMA Type: SR 600 Year of manufacture: 2010 Roller diameter: 600 mm Cutting height: 380 mm Cutting width: 580 mm Motor power: 2.2 kW Table: 600 x 540 mm Motor brake: Yes Cutting speed: 1,350 m/min Saw blade width: 6 - 25 mm Table tiltable: Yes, 45° Weight: 270 kg Itjdpfx Aoztncksbnek Dimensions: 2,085 x 1,035 x 820 mm

Condition: used, Year of construction: 2014, machine/vehicle number: 42, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, total height: 2,550 mm, total length: 5,500 mm, total width: 2,200 mm, overall weight: 2,600 kg, saw band length: 5,900 mm, saw band width: 13 mm, We offer a used, fully operational CNC 020 industrial bandsaw with automatic feeder, designed for high-precision cutting of wood or composite materials. The machine features CNC control and automatic feed in X, Y, and C axes, allowing fast, accurate, and repeatable cuts up to 2000 mm in length. Itedexm S E Aepfx Abnsk Technical data: CNC Cutting Length: 0 – 2000 mm Cutting Height: 0 – 160 mm Cutting Angle: +90° / -90° Cutting Depth: 100 mm Saw band: 5900 x 13 mm Flywheel Diameter: 900 mm Flywheel Upper Adjustment Range: 0 – 80 mm Flywheel Speed: 750 rpm Saw Speed: 2000 m/min Flywheel Motor self-braking 15 HP Forward Movement Speed X-axis: 0 – 70 m/min Return Speed X-axis: 70 m/min Forward Movement Speed Y-axis: 0 – 20 m/min Return Speed Y-axis: 20 m/min Pneumatic Pressure: 6 BAR X-axis Motor Torque: 12 Nm Y-axis / Y2-axis Motor Torque 4.3 Nm B-axis / C-axis Motor Torque 1.1 Nm Z-axis Motor Torque: 4.3 Nm Overall Dimensions 5000 x 2200 x 2550 mm Weight CNC 020 2600 kg Additional Information: We have 4 identical machines available, all from similar years of manufacture, in good condition. Ideal for production lines requiring multiple synchronized units or for spare parts standardization.

Condition: good (used), Year of construction: 1995, functionality: fully functional, power: 11 kW (14.96 HP), input voltage: 380 V, input current: 32 A, cutting height (max.): 900 mm, cutting width (max.): 900 mm, Equipment: documentation/manual, lighting, motor brake, This sawmill includes: 2x clamping devices 4x vertical stops 4x leveling devices with clamps 4x log lifting arms 1x pre-cutter 1x log roller with drive 1x saw blade lubrication system 1x water lubrication system 1x electric positioning control Basic cutting length: 9.0 m Log passage: approx. 90 cm Hydraulic pump: 14 liters Motor power: 11 kW Saw blade width: 100 mm The saw was used as a secondary source of income, with approximately 500 cubic meters of timber cut per year. The friction wheel drive has been replaced with a hydraulic feed system, and the hydraulic pump has also been replaced. It has a tilting cabin and a handle heater for the fingers, which is supplied with warm hydraulic oil. The cast iron rollers were replaced about two years ago, and approximately 800 cubic meters of timber have been cut with them. Itjdpfxszk Exdj Abnok Two saw bed extensions are included, one 3.0 m and one 2.0 m, for a total cutting length of 14.0 m. The saw motor was re-conditioned last year. An additional 18.5 kW electric motor is included, but has not yet been installed. Approximately 15 saw blades for hardwood and softwood are included, some of which are new. The machine runs very well, all components are fully functional, and there are no leaks in the hydraulic system. The saw can be inspected while in operation. For sale due to the purchase of a new machine.

Condition: used, Year of construction: 1998, machine/vehicle number: 0102-260022, The Behringer HBP 430N is a horizontal, double-column bandsaw designed for professional use in metalworking. It is suitable for precisely cutting solid materials, pipes, and profiles and impresses with its robust construction and high cutting accuracy. The machine is designed for straight cuts; depending on the configuration, miter cuts up to 45° are also possible. With a cutting range of Ø 430 mm or 600 × 430 mm and a continuously variable cutting speed of 17 to 110 m/min, it can be used in a variety of applications. The powerful 7.5 kW sawing motor, hydraulic workpiece clamping, and coolant system with 150 liters ensure reliable and economical operation. With a machine weight of 2,100 kg, the HBP 430N offers high stability and is ideal for daily use in metalworking, steel construction, and mechanical engineering companies. Technical Data HBP 430 N Working range 90° round Ø 430 mm Working range 90° flat 600 × 430 mm Working range 45° flat 320 × 430 mm Smallest material dimension 15 mm / 10 × 15 mm Smallest section length 10 mm Remaining piece length approx. 40 mm Cutting speed 17–110 m/min Coolant tank 150 l Belt tension 80 bar Sawing motor 7.5 kW Hydraulic motor 2.2 kW Coolant pump 0.12 kW Chip conveyor 0.09 kW Connected load approx. 11 kW Mains connection 400 V / 50 Hz Control voltage 24 V DC Current consumption approx. 22 A Fuse 35 A Cable cross-section min. 4 × 6 mm² Saw band dimension 5,800 × 54 × 1.3 mm Machine weight 2,100 kg Itsdpfozq S Ncjx Abnek Material support height 700 mm

Condition: used, Year of construction: 2005, machine/vehicle number: 0102-260023, The Behringer HBP 313 is a horizontal, double-column band saw for industrial metalworking. It is used for the precise cutting of solid materials, tubes, and profiles. Its robust design and continuously adjustable cutting speed make it suitable for both single-piece and series production. The machine has a working area of Ø 310 mm for round materials and 500 × 300 mm for flat materials. The cutting speed is continuously adjustable from 20 to 140 m/min. A coolant system with a 60-liter capacity and a band tension of 60 bar ensure high cutting quality and a long service life of the saw blade. The machine is powered by a 4.0 kW sawing motor. The electrical connection is 400 V / 50 Hz, and the control system operates with 24 V DC. With a weight of 1,960 kg, the HBP 313 ensures low-vibration operation and high processing accuracy. Technical data Working area Ø 310 mm / 500 × 300 mm Smallest material dimensions Ø 10 mm / 10 × 8 mm Smallest section length 8 mm Remaining piece length from 10 mm Cutting speed 20–140 m/min Coolant 60 l Ijdpfx Abezq S Ilenetk Band tension 60 bar Sawing motor 4.0 kW Hydraulic motor 1.5 kW Coolant pump 0.12 kW Chip conveyor 0.09 kW Connected load approx. 7 kW Mains connection 400 V / 50 Hz Control voltage 24 V DC Current consumption approx. 14 A Fuse rating 25 A Machine weight 1,960 kg Material support height 800 mm

Condition: used, Year of construction: 2012, machine/vehicle number: 0102-260024, The Behringer HBP 313N is a horizontal, double-column bandsaw for industrial metalworking. It is used for the precise cutting of solid materials, pipes, and profiles. Its robust design and continuously adjustable cutting speed make it suitable for use in both single-piece and series production. The machine has a working area of Ø 310 mm for round materials and 500 × 300 mm for flat materials. The cutting speed is adjustable between 20 and 140 m/min. A coolant system with a 60-liter capacity ensures good cooling and a long service life for the saw blade. The machine is powered by a 4.0 kW saw motor. The electrical connection is 400 V / 50 Hz, and the control system operates at 24 V DC. With a machine weight of 1,960 kg, the HBP 313N offers high stability and ensures precise machining of metal materials. Technical specifications: Iodjzq S Hnspfx Abnetk Saw blade dimensions 5,000 x 34 x 1.1 mm Working area Ø 310 mm / 500 × 300 mm Cutting speed 20–140 m/min Coolant 60 l Belt tension 60 bar Saw motor 4.0 kW Connected load approx. 7 kW Mains connection 400 V, 50 Hz Control voltage 24 V DC Machine weight 1,960 kg Material support height 800 mm

Condition: good (used), Year of construction: 2015, machine/vehicle number: 0-200-24-0779, functionality: fully functional, input voltage: 400 V, input current: 55 A, input frequency: 50 Hz, type of input current: three-phase, workpiece height (max.): 60 mm, edge thickness (max.): 20 mm, total length: 10,825 mm, Used single-sided HOMAG edge-banding machine for straight edges – KAL 370 For pre-milling (jointing trimming), gluing and post-processing of various kinds of edging materials. Fixed stop on the left side. Year of Manufacture: 2015 EQUIPMENT / SPECIFICATION BASIC MACHINE - with 80 mm wide conveyor chain with rubber-coated chain pads, - workpiece thickness 8 to 60 mm - top pressure with compound V-belt, automatic height adjustment (to workpiece thickness) - panel support with roller guide, extractable approx. 700 mm - glue roller drive in case of feed stop - hand switch /remote control for setup – mode - adjustable infeed fence with NC-axis (CAN-bus) - Jointing trimming 2 motors (clockwise, counterclockwise), 2x4kW, rear motor w. jumping function GLUING SECTION V20, consisting of: - QA60 glue application unit, with PTFE-coating (Teflon), with manual quick-adjustment glue gates - pneumatic clamping of glue application in mount - Pre-melter for EVA glue - Edge magazine, edge thickness min. 0,4 mm to max. 20 mm Edge width (height) max 65 mm - modes: edge rolls, (veneer) strips, solid wood edging - Pressure zone with automatic horizontal adjustment (NC CAN-axis) to edge thickness, 1 driven & 4 non-driven pressure rollers. POST-PROCESSING SECTION: - Snipping (end-trimming) unit PK85 horizontal, 2 motors, with straight/chamfer cutting function - Rough trimming 2x1.15 kW, top/bottom - Corner rounding FK11, 2 motors (top/bottom) with various trimming heads, motorised adjustment - Universal trimming unit, (e.g. grooving), 3.5 kW, tiltable, w. electro-pneumatic jumping control - Multi-Profile (radius-) scraping MN11 with automatic positioning by NC-axis (CAN) - Flat scraping (glue joint) FA20, top/bottom, (version with 3 tracer rollers) - Buffing unit FP10, top/bottom Control / software: - powerControl PC 23 PowerTouch - woodCommander 5 Iodsztl Scjpfx Abnotk Machine dimensions 1085 x 180 x 235 cm (with opened doors)

Condition: new, Holzprofi bandsaw blades are made with high-quality materials and are of carpentry quality! They offer high cutting performance and reliability, making them ideal for workshops and businesses that value quality and precision. Advantages and features: - High-quality bandsaw blade - Tooth tips hardened for long life and precise cutting Length: 1750mm, suitable for Hans Schreiner ZHBS, among others 2050mm, suitable for Holzprofi GM 310, among others 2400mm, suitable for Hans Schreiner BS 350, among others 2495mm, suitable for Hans Schreiner BS 350 from model year 2022, among others 2560mm, suitable for Holzprofi SBW3501, among others 2630mm, suitable for Hans Schreiner 12-BS350B, among others 3345mm, suitable for Hans Schreiner HBS-HS400, among others 3430mm, suitable for Hans Schreiner HBS 450, among others 3550mm, suitable for Holzprofi GM 500, among others 3607mm, suitable for Hans Schreiner HBS480, among others 3632mm, suitable for Holzprofi SBW4800, among others 3861mm, suitable for Holzprofi SBW5300, among others Ijdpfxjzq Dd Se Abnetk 3980mm, suitable for Holzprofi HBS 550, among others 4080mm, suitable for Hans Schreiner HBS-HS 610, among others 4230mm, suitable for Holzprofi GM 620, among others 4318mm 4600mm, suitable for Felder SBW6300, among others 4600x35mm, tooth pitch 12mm 4600x35mm, tooth pitch 22mm 4600x35mm, tooth pitch 22mm X-Cut 5020mm, suitable for Holzprofi FBR700, among others 5070mm, suitable for Holzprofi FBR700, among others 5600mm, suitable for Holzprofi FBR800, among others Width: 06mm (partially) 08mm 10mm 16mm 20mm 25mm 30mm (partially) All other sizes are also possible! From 16.00 EUR Prices depend on length and design. If you have any questions about the correct length/width for your machine, please contact us, we will be happy to help. Tel.: 00 43 7613 5600

Condition: as good as new (ex-display), Year of construction: 2026, Roll diameter: 500 mm Overhang of the support: 485 mm Cutting depth: 320 mm Table swiveling: yes, 0 to +20° Table size: 700 x 490 mm Belt speed: 18 m/min Motor power: 2 kW / 400V Motor brake: yes / automatic Dust extraction connection: 2 x 100 mm Machine length: 920 mm Iedpfxezq Dcho Abnjtk Machine width: 600 mm Machine height: 1880 mm Weight: 215 kg

Year of construction: 2026, condition: used, consisting of: 1 PAMMINGER Flyer 2.4 VA stretch wrapping unit, year of manufacture: 2009, serial number: M00812, 1 MESSERSI PR9 banding unit, year of manufacture: 2009, serial number: 3421, roller conveyor, protective enclosure, control system. Iodezqzb Iepfx Abnstk

Condition: as good as new (ex-display), Year of construction: 2026, Roller diameter: 700 mm Outrigger overhang: 670 mm Cutting depth: 430 mm Table can be swivelled: yes, 0 to +20° Table size: 700 x 930 mm Belt speed: 18 m/min Itjdpfx Ashpl Tqjbnsk Motor power: 3 kW / 400 V Motor brake: yes / automatic Dust extraction connection: 2 x 100 mm Machine length: 1260 mm Machine width: 750 mm Machine height: 2230 mm Weight: 420 kg

Condition: used, Year of construction: 1997, Roller diameter: 600 mm Outrigger extension: 580 mm Cutting depth: Table can be swivelled: yes Belt speed: Motor power: 2.2 kW Motor brake: yes / automatic Dust extraction connection: 100 mm and 120 mm Machine length: 1150 mm Machine width: 850 mm Iodszqyxfspfx Abnjtk Machine height: 2100 mm Weight: 200 kg

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, For sale is a professional, heavy-duty band resaw (slitting saw) from the renowned Italian manufacturer CENTAURO S.p.A., model SUPERCUT 80. The machine was manufactured in 2014 and comes from a line of technologically advanced saws designed for extremely precise cutting of wood into thin strips and veneers. Thanks to its robust construction and high frame rigidity, it guarantees perfect cutting geometry while maintaining high performance. Full technical specifications (from the nameplate): Manufacturer: CENTAURO S.p.A. (Italy) Model: SUPERCUT 80 Year of manufacture: 2014 Main motor power: 15 kW (approx. 20 HP) – ensures stable operation even with hard exotic wood species and oak. Wheel speed: 680 rpm Ijdpezti T Refx Abnstk Diameter of cast iron wheels: 800 mm Certificate: CE (full documentation and compliance with safety standards)

Condition: new, Year of construction: 2023, cutting diameter 350 mm saw band length 4640 x 34 x 1,1 mm table height 860 mm 350 mm 15 - 100 m/min 4,0 kW 2800 kg 2200 x 3200 x 2200 mm Display Model Current list price: 55,910 euros Fully automatic band saws with a two-column guide system for production cuts, particularly in materials that are difficult to machine and solid stock. With this machine, MEP offers you a machine that is at the highest technical level and, thanks to the use of the highest-quality materials, features an unmatched, robust, and torsionally rigid structure. An extremely robust saw frame made of gray cast iron provides the necessary stability, which leads to impressive cutting results, and the sturdy gray cast iron columns on which the saw frame glides via preloaded linear guides ensure ensure the highest cutting precision even under maximum load. The modern machine control system (MEP NC 5.0) offers the user maximum ease of operation and ensures trouble-free operation. (Monitoring/Evaluation/Correction in real time) MAXIMUM PERFORMANCE > The two operating modes (semi-automatic and automatic) enable efficient cutting under all conditions. > The control system allows for the storage of up to 100 cutting programs, each with different quantities and lengths, and minimizes programming time for frequently executed jobs. > The automatically detected starting position of the saw head reduces the setup time. > The saw headâ??s feed via linear guides driven by hydraulic cylinders with preloaded ball screws ensures reduction of mechanical vibrations during cutting and greater Ijdpjlf Tu Usfx Abnstk stability. > The automatic alignment of the front saw blade guide head based on the dimensions of the bars to be cut reduces processing time. > Saw blade tension is controlled by the brushless motor and is constantly monitored and automatically adjusted to the set minimum value. EXTREMELY FLEXIBLE > The feed system, with a 600 mm stroke, is repeatable and cuts all lengths. > The vertical roller pair allows for holding and aligning any type of bar or bundle that is fed into the machine. > The vector drive for stepless adjustment of the blade speed from 15 to 100 m/min enables the cutting of any material. > The motorized chip conveyor can be mounted to the right or left of the cutting area . FEATURES: Fully automatic control â?? NC 5.0 - Innovative (Windows CE-based) touchscreen control with additional soft- touch buttons for frequently used functions -USB port -Joystick for manual control of the axes (X-Y) -Controlled head descent with automatic compensation via a servo valve , constant monitoring of the preselected torque 4, and with precise feed rate adjustment in millimeters per minute 5 -Adjustment/preselection of the continuously variable band speed in m/min. -Band saw tension with tension monitoring and display via an electronic converter -Automatic detection of the start of the cut -Large 7" color touchscreen for displaying and selecting all machine functions and parameters, and programming in seconds. Display of detailed alarm and error messages -Numerous special functions, including executing various lengths and quantities (10 programs) as a sequence, clean cut, step-by-step execution, and much more. -Sturdy, torsion-resistant, and low-vibration saw frame made of cast steel -Carbide band guides for maximum cutting precision, hinged for easy saw band replacement -Large, adjustable cast steel idler ...