Used Bag Opener for sale (11,743)

Condition: used, Technical data feed hopper with hydraulic moving floor and bag opener for recyclables from yellow bags and residual waste: Manufacturer BRT HARTNER GmbH Type HP5-3035 Year of construction 2015 Hopper volume 30 m³ Drive line 17.5 kW Dimensions in current state 13,200 x 3,050 x 4,350 mm (l x w x h) Condition of the machine: The feed hopper with bag opener was used at a large recycling plant, where recyclable materials from yellow bags or commercial waste were tipped into the hopper using wheel loaders, the bags were opened using the bag opener, and the recyclable materials were transported to a sorting plant or the commercial waste was transported in measured quantities for further processing. The system functioned flawlessly until it was dismantled and replaced with a larger system with higher throughput capacity. The machine was dismantled into individual parts in our workshop, partially overhauled, reassembled, and tested during operation. Kjdpfey Urtfsx Apmsna The following overhaul work was carried out and the following spare parts were replaced: Dismantling of the feed hopper and bag opener into individual parts. Cleaning, partial sandblasting, priming and painting of the steel parts. Various wear and cover plates were newly manufactured and installed. Cutting off the worn ends (approx. 40cm) of the push floor pipes. Welding on the new pipes and smoothing the push floor pipes. Replacement of all plastic sliding plates for the hydraulic push floor. Removal of the hydraulic unit from the push floor, emptying of the hydraulic oil tank, replacement of the oil filters, refilling with new hydraulic oil. Replacement of the three hydraulic blocks, all valves, the oil sight glass and all hydraulic hoses from the hydraulic unit. The seal kit and hydraulic hoses were replaced on all three hydraulic cylinders of the push floor. All six limit switches (proximity sensors) on the push floor were replaced. The conveyor chains on the left and right of the scraper conveyor were replaced. Seven carrier bars on the scraper conveyor were replaced. The drive motor for the ripper blades was replaced. All nine pneumatic cylinders for the pressure pipes were replaced. All pneumatic lines and connections were replaced. All of the plastic sliding plates for the hydraulic operation of the bag opener were replaced. The bag opener can be moved vertically so that the system can also be used for commercial waste or residual waste without the bag opener. The side impact protection plates on both sides were replaced. Various wear parts of the bag opener have been replaced. The entire system has been rewired and reconnected. The system control in the control cabinet has been retrofitted by the manufacturer BRT Hartner to a self-sufficient individual control system and the standard programme has been reloaded into the control system. The system has been commissioned and tested by the manufacturer BRT Hartner, see the function video. Comments: The documentation (Manual, CE-declaration, electr./hydr.-drawings), are available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: new, Bag opener, for opening bags containing recyclable materials such as "yellow bags," etc. Can be used as a stand-alone unit or as a component in a system, e.g., a sorting system. Throughput: 6-7 tons/hour Drive power: approx. 18 kW Dimensions: 8000 x 2350 x 2700 mm Weight: 11 tons Made to order Knjdpfx Aedxwlzopmja Delivery time: approx. 30 weeks Further data and quotation upon request.

Year of construction: 2025, condition: new, The Bag Opening Silo is a compact and flexible solution designed for efficient emptying of small and big bags containing cement, lime, and other powdered materials. Knjdpfozcwrhox Apmja Big bags can be safely and easily unloaded using a forklift or other lifting equipment, ensuring a clean, safe, and controlled material transfer process. This system represents a practical solution for construction sites and production locations where bulk cement delivery by tanker is not possible, enabling continuous use of bagged materials. In addition to material emptying and dosing, the system can also be used as a temporary or permanent intermediate storage solution, providing full protection of the material from moisture, dust, and other external influences. The system can be easily connected to existing mobile and stationary concrete batching and mixing plants, allowing fast integration into the existing production process. Upon customer request, the system can be equipped with load cells for precise material weighing and control. The discharge capacity is 15 m³/h. Thanks to its compact construction, easy handling, and high functionality, the Bag Opening Silo represents a reliable and practical solution for handling powdered materials at various construction sites and production facilities. Available models: - BS 02 - Capacity: 2 m³ - BS 04 - Capacity: 4 m³ - BS 06 - Capacity: 6 m³

Condition: new, Year of construction: 2026, BULK PRODUCTS BAGGING LINE PUDAS-50NB is designed for automated packaging of bulk products (type of peat, turf, pellets, sand or simillar) by weight • The process is managed via color Touch-screen, multilingual Menu. • Suites for dosing into bags from 5 to 50 kg. • Capacity arround 3000 kg/hour. (depending on the product charactersitics and the size of the bags) operated by one person Knjdpfx Apoi El Hromoa • Power supply 1ph., 230V, 3.2kW • Dimensions: L6.6m x W2.5m x H2.0m Made in Lithuania. CE certified.

Condition: excellent (used), Saxon Continuous Bag Sealer Stainless steel Ksdpfx Apezcrlcjmsna Adjustable temperature control Electric adjustable mast height Mobile on castors Excellent condition

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: 2025701, total width: 2,600 mm, total length: 9,500 mm, total height: 1,900 mm, cutting length (max.): 530 mm, type of input current: three-phase, compressed air connection: 8 bar, power of the servo motor: 4,000 W, power: 4 kW (5.44 HP), overall weight: 8,000 kg, inner diameter: 76 mm, feed rate X-axis: 160 m/min, feed rate Y-axis: 60 m/min, feed rate Z-axis: 35 m/min, feed length X-axis: 530 mm, feed length Y-axis: 130 mm, feed length Z-axis: 800 mm, working width: 1,050 mm, input voltage: 380 V, installation height: 2,500 mm, GUTENBERG MASTER BAG 300X (2026) – PPWR-READY High-Speed Square-Bottom Paper Bag Machine High-speed, fully automatic roll-fed machine for producing square-bottom paper bags without handles. The MASTER BAG 300X is designed for industrial paper-bag manufacturers supplying food, bakery, retail, agricultural and European packaging markets. The PPWR-READY EDITION combines efficient bag production with controlled production recipes, approved-material management, batch traceability, waste monitoring and quality documentation. Main features Production speed: up to 180 bags/min Fully automatic roll-fed production Fully servo-driven control system Automatic paper feeding and tension control Precision tube forming and cutting Controlled side-seam and bottom gluing Automatic bottom folding and forming Automatic stacking and counting Multilingual HMI touchscreen Production of printed and unprinted bags Optional inline flexographic printing unit Suitable for approved kraft and coated-paper structures CE conformity for machinery safety PPWR-READY production package The machine can be configured to support the controlled production and documentation of paper bags designed for conformity with Regulation (EU) 2025/40 on Packaging and Packaging Waste—PPWR. Available functions include: Registration of paper supplier, grade and batch Recording of coatings, inks and adhesives Approved-material lists for each bag specification Password-protected production recipes Prevention of unauthorised material substitutions Customer, product and SKU identification Raw-material-to-finished-bag lot traceability Operator identification and production timestamps Paper, adhesive, waste and reject monitoring Recording of dimensional and bonding inspections Production batch and traceability reports Support for technical documentation requested by EU customers Barcode or QR-code material identification option Camera inspection and automatic reject options Suitable applications Flour, sugar, rice, pasta and grains Coffee, tea, spices, lentils and nuts Dried fruit and bakery products Bread, pastries and takeaway food Grocery and retail paper bags Seeds, animal feed and pet-food products Herbal products, powders and supplements Hardware and small industrial parts PPWR-READY acceptance test Knedpfx Apjwzm I Remoa Final acceptance can be performed using the customer’s actual paper, coating, printing ink, adhesive, bag dimensions and intended filling weight. The test can confirm: Dimensional accuracy Side-seam and bottom integrity Stable production speed Glue consumption Waste percentage Production traceability Batch-report generation Important regulatory information The MASTER BAG 300X is a PPWR-ready production platform. Final PPWR conformity applies to each finished paper-bag specification and depends on the actual paper, coating, ink, adhesive, components, intended use and recycling pathway. Machine CE conformity covers machinery safety and is separate from PPWR conformity of the finished packaging. Model year: 2026Machine type: Square-bottom paper bag machineBag type: Without handlesMaximum speed: Up to 180 bags/minCondition/configuration: Available according to selected equipment package Contact us for price, complete technical specifications, material trials, factory acceptance testing, installation, and delivery conditions.

Year of construction: 2019, condition: used, functionality: fully functional, Approximately 250 pieces in stock. Price per piece: 100 Euros. Ksdoy Uc Sfjpfx Apmena A mix of used and new items.

Condition: used, Year of construction: 2022, PRODUCT TYPES: • Four side seal pouches • Quad seal pouches • Side seal pouches • Transverse zipper pouches • Gusset pouches • Bottom stick hole pouches • Micro-perforated pouches • Handle hole pouches • Round corner pouches MATERIALS: • LDPE • CPP • MCPP • AL • Nylon • PP • Laminated film structures MAIN TECHNICAL INFORMATION: Material thickness: 60–250 μm Max. web width: 1300 mm Max. roll diameter: 800 mm Core diameter: 3” and 6” Max. pouch width, quad seal: 400 mm Max. pouch length: 1000 mm Eye mark accuracy: ±1 mm Machine speed: 15–65 pcs/min Material speed: 40 m/min Main power: 400V, 50Hz, 3 phase Installed power: 100 kW Machine weight: approx. 18,000 kg Machine size: 33,500 × 4,200 × 1,800 mm POUCH SIZE RANGE: Quad seal / side welded width: 180–400 mm Gusset depth: max. 80 mm Minimum gusset depth: 30 mm Bag length: 360–1000 mm UNWINDING SECTION: • Air shaft unwinding • Magnetic powder brake • Dancing roller tension control • Servo-driven unwind system PERFORATION SYSTEM: • Micro perforation unit • Wheel type perforation Kodpozf Nk Tofx Apmona • Additional perforation holes • Same type as existing machine configuration FOLDING SYSTEM: • Four side seal / quad bag folding wheel section SEALING AND COOLING SYSTEM: Mechanical press sealing system: Quad seal longitudinal sealing: 2 groups, 1010 mm Quad seal longitudinal cooling: 2 groups, 1010 mm Cross sealing station: 6 sets No. 1: K-seal No. 2: Gusset filling sealing No. 3: Cross seal, 740 mm length / 60 mm width No. 4: Cross seal, 740 mm length / 60 mm width No. 5: Cross seal, 740 mm length / 60 mm width No. 6: Cross cooling, 740 mm length / 60 mm width Additional 5 mm sealing section, upper and bottom PUNCHING SYSTEM: Tear slit / notch puncher 3-hole handle puncher Handle puncher: 20 × 80 mm, 3 sets Hole sizes: • 3 holes Ø20 mm • 20 × 80 mm • 24 × 77 mm Round corner puncher: 2 sets Puncher supports: 3 sets Bottom stick hole puncher: • 12 mm, 8 pcs • 16 mm, 8 pcs Vacuum system for punch waste removal DRIVE SYSTEM: Main motor: 3.5 kW Back draw roller servo: 3.5 kW Front draw roller servo: 3.5 kW Middle draw roller servo: 3.5 kW Longitudinal independent sealing servo: 5 kW × 2 Unwind servo motor: 1.5 kW × 1 / 3.5 kW × 1 Tension control servo: 3.5 kW × 1 Flying knife servo: 1.5 kW × 1 Manipulator sucker drive: 0.75 kW × 1 Finished product carrier counting drive: 0.75 kW × 1 CONTROL SYSTEM: • PLC control • 10” touch screen • Suitable for printed and unprinted bags • 16 temperature control zones • Individual temperature display • Temperature tolerance: ±2°C • High-sensitive eye mark sensor • Adjustable eye mark position STACKING SYSTEM: • Simple type stacking table • Static removal system • Automatic stop when machine stops • Alarm for bag output range: 25–100 bags • Step motor belt control • Belt width: 60 mm • Adjustable batch and belt length SAFETY SYSTEM: • Safety light curtain • Emergency pulling rope • Emergency buttons every 2 meters • Individual emergency control INCLUDED OPTION: ZIPPAK transversal zipper attachment Transversal zipper unwinder and rewinder Innolock / Velcro zipper capability Tooling for 3 zipper sizes: • 180–220 mm • 230–300 mm • 310 mm Micro-perforation holes Bottom stick hole puncher Trim rewinders Chiller

Condition: good (used), Saxon Bag Sealer With Reverse Facility With Top Bag Cutter Kedpsv Dm Epsfx Apmena With Hydraulic Lift Mast Stainless Steel 230 Volt Power Supply Price € 3,950

Condition: good (used), Year of construction: 2013, Saxon Bag Sealer Model SR1000 Adjustable temperature control Digital display Adjustable mast height Year 2013 Kodep At T Ijpfx Apmsna Stainless steel Mobile on Castors Price € 5,950

Condition: good (used), Saxon Bag Sealer Stainless Steel With Stainless Steel Conveyor 230 Volts Single Phase Power Knsdpfsv Dm Dlsx Apmea Height adjustable mast Mobile on castors Fixed adjustable feet also Conveyor belt dimensions 1500mm L x 400mm W Price € 5,950

Condition: good (used), OK Supersealer Continuous Bag Sealer Fully stainless steel Complete with stainless steel belt conveyor Adjustable temperature control Stop start controls, E stop Height adjustable sealing head Mobile on castors and lockable feet Kjdpfozbnnksx Apmsna The best bag sealer on the market Price € 9,500

Condition: good (used), Saxon Bag Sealer Stainless Steel Complete with stainless steel mesh belt conveyor Variable speed control Adjustable Temperature control Suitable for heavy gauge bags Mesh belt 250mm wide Machine dimensions 1800mm Long x 800mm Wide Price € 6,950 Kedpfx Apozbnmgjmjna

Condition: used, Year of construction: 2016, functionality: fully functional, We are offering this used NEWTEC BAG PALLETIZING Chimpal 600 palletizer, year 2016. Manufacturer: NEWTEC BAG PALLETIZING Model: Chimpal 600 Serial number: A1607 Year of manufacture: 2016 Type: 600.S1000.G067.053.OR3 Description: Palletizing Equipment The system can also palletize Euro pallets 800x1200 mm or CP1 1000x1200 mm. Maximum bag weight: 50 kg Capacity: up to 500 bags per hour Including sheet dispenser The system is currently in operation and can be inspected under working conditions until it is dismantled in September/October 2026. Test palletizing is possible during the summer. Newtec has been acquired by Haver & Böcker. Service for the palletizers is provided from Germany. A connected wrapper can be seen in the pictures, which is also for sale. Knedpfsyzzr Rox Apmja

Condition: excellent (used), Year of construction: 2016, BAG-IN-BOX SEMI AUTO FILLING MACHINE Smurfit Kappa Vitop, ITALY, 2016 Bag filling volume from 1L to 28L Pouch-up filling volume from 1L to 3L Touch screen control panel The semi-automatic filling machine Vitop has been designed to fill liquid and semi-liquid products in bags and pouches. Improved shelf-life of liquid thanks to revolutionary filling valve that separates vacuum and nitrogen circuits Easy to operate and maintain Knedpeyr Awbsfx Apmoa Precise electromagnetic flowmeter for filling accuracy Hygienic: Equipped with a cleaning a sanitizing program Suitable for Vitop® Original and Vitop® Compact Simple to adjust between sizes Optional laminar air flow for filling in ultra clean conditions Especially well-suited to medium and Pouch-Up® fillers, the semiautomatic filling machine Vitop offers excellent performances and reliability. The filler uncaps the tap, inhales air from the bag before filling, fills the bag/pouch with the required quantity of liquid and recaps the tap. Nitrogen is inflated at the end of the cycle in order to better preserve the product inside and help to clean the valve neck. An airflow hood (option) provides mechanical decontamination around the filling body area through overpressure.

Condition: used, Automatic Bag Filling Line Bag weights from 5kg to 1000kg Infeed with product de-clumper / product breakup breaker and sieve. Incline screw auger to high level hopper and mixer. Delivery system to bag filler where weighing takes place and metal detection before bag filling point. Kjdpfxoyq Tb Ij Apmsna This system comes with a second mobile screw auger for filling 1000kg big bag / sacks Complete with all the controls for the smooth running of this bagging line. After Bagging the bags are sealed with a Saxon Bag Sealer and then stitched with a Singer Bag Stitcher.

Condition: used, empty load weight: 6,572 kg, maximum load weight: 29,428 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 08/2025, suspension: air, tire size: 385/65 R22,5, Equipment: ABS, | Krone SDP27 Profiliner | 1st axle liftable | EDSCHA canvas cover | BPW axles with disc brakes | Spare wheel holder | Tool box | Pallet box | Tires: 385/65 R22.5 | Subject to errors, typos and prior sale. Kodjzvp Srjpfx Apmena

Condition: new, overall weight: 24,000 kg, axle configuration: 3 axles, loading space length: 9,000 mm, loading space width: 2,550 mm, suspension: air, tire size: 235/75 R 17,5, color: other, gearing type: other, front tire size: 235/75 R 17,5, rear tire size: 235/75 R 17,5, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, Loading height approx. 940 mm, 20 x lashing points, each rated at 6 tons, 20 x lashing brackets, each rated at 6 tons, 18 x lashing holes, 7 x spar pockets, centered, 14 x spar pockets in the outer frame, 2 pairs of container locks, surcharge for front wall approx. 1,600 mm high, plug-in design: €1,500, surcharge for aluminum side and rear boards: €3,500, surcharge for extendable drawbar: €1,500, surcharge for 4 x warning signs with lighting: €800, also available with loading platform lengths of 8,600 mm, 10,000 mm, or 10,500 mm!, -- Printing errors, errors and changes excepted, sample images --, more data at: !, More Details: ! Kodpfjzvpgcsx Apmsna

Condition: used, empty load weight: 3,730 kg, maximum load weight: 6,270 kg, overall weight: 10,000 kg, axle configuration: 2 axles, first registration: 08/2016, loading space length: 7,300 mm, loading space width: 2,480 mm, loading space height: 2,770 mm, loading space volume: 50 m³, suspension: air, tire size: 235 / 75 R 17,5, color: other, gearing type: other, front tire size: 235 / 75 R 17,5, rear tire size: 235 / 75 R 17,5, driver cabin: other, emission class: none, Equipment: ABS, compressed air brake, Front with through-loading and short transition flap for tail lift, 4 rows of aluminium slats, 7 pairs of lashing rings on the loading area, each rated at 2.5 t, 30 mm phenolic plywood floor, Vehicle is sold on consignment, Subject to print errors, mistakes and changes, Sample images, More data at: !, More Details: ! Ksdpfxszvpcwj Apmsna

Condition: new, empty load weight: 2,980 kg, maximum load weight: 7,520 kg, overall weight: 10,500 kg, axle configuration: 2 axles, loading space length: 6,200 mm, loading space width: 2,480 mm, suspension: air, tire size: 235/75 R 17,5, wheelbase: 990 mm, color: other, gearing type: other, front tire size: 235/75 R 17,5, rear tire size: 235/75 R 17,5, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, Loading height approx. 860 mm, vehicle interior width approx. 2,480 mm, front panel made of galvanized steel, 600 mm aluminum sideboards, foldable and removable, removable posts, 40 mm wooden floor, 3 post pockets in the center for plug-in posts 80 x 80, 6 tie-down points, outer frame with tie-down eyes, reinforced gearbox support with load and fast gear, contour marking and side impact protection, mudguards and spray suppression, rear, surcharge for front panel grille 1,600 mm high (perforated sheet metal), price: 1,400 euros, surcharge for aluminum ramps, load capacity per pair 8 tons, and 2 x folding supports at the rear, price: 1,900 euros, -- printing errors, errors and changes excepted, sample images --, more data at: !, More Details: ! Knedpfxozvpcds Apmja

Condition: used, empty load weight: 3,900 kg, maximum load weight: 8,000 kg, overall weight: 11,900 kg, axle configuration: 2 axles, first registration: 05/2022, loading space length: 7,300 mm, loading space width: 2,480 mm, loading space height: 2,600 mm, loading space volume: 47 m³, suspension: air, tire size: 245/70R17,5 143J, wheelbase: 990 mm, color: other, gearing type: other, front tire size: 245/70R17,5 143J, rear tire size: 245/70R17,5 143J, driver cabin: other, emission class: none, Equipment: ABS, compressed air brake, At the front, it has portal doors for drive-through loading, at the rear, it also has portal doors, a 27 mm screen-printed floor, 5 rows of aluminum V-stringers, 7 pairs of lashing eyes on the loading platform, an outer frame with lashing holes, a loading height of approximately 1,050 mm, contour marking according to ECE R 048, and at the front, 2 geared winch supports with 2 gears. BPW axles. -- Subject to printing errors, errors and changes, sample images --. More data can be found at: ! More Details: ! Knjdpjzvdb Uefx Apmsa

Year of construction: 2021, condition: excellent (used), functionality: fully functional, Industrial automated COMATEC Solids Big Bag receiving, handling, opening and discharge station for dry bulk solids. The system was designed to reduce manual handling of the bags. The operator places the full Big Bag in the loading area and attaches its lifting loops to the lifting crossbeam. The subsequent lifting, travel and positioning operations are carried out automatically by programmable electric hoists. The installation incorporates a double gantry-type supporting structure equipped with two VICINAY electric wire-rope hoists, each with a lifting capacity of 1,600 kg. The hoists are fitted with electric travelling trolleys and numerically controlled positioning. Each hoist has a 3 kW lifting motor and a 0.55 kW travelling motor, with an approximate lifting speed range of 1.8 to 14.5 m/min. Once positioned above the receiving station, the Big Bag is opened from the bottom by means of a removable and replaceable knife system, allowing rapid product discharge. The material then passes through a COMATEC DRG-300 lump breaker, a K-900-DC circular vibrating screener and a 2,000-litre buffer hopper. From the hopper, the product is metered by means of a tubular screw feeder. The system was originally designed for handling PTA powder, with an apparent bulk density of approximately 0.9-1 kg/dm³. It may also be suitable for other dry powders or granular products, subject to verification of product compatibility, material construction, ATEX classification and the required filtration and discharge arrangements. Main components Knjdpezvc Duefx Apmoa • Double gantry structure for Big Bag handling. • Two VICINAY 1.6 t electric hoists. • Electrically driven travelling trolleys. • Programmable automatic positioning. • Big Bag lifting crossbeams. • Removable knife system for rapid bag opening. • COMATEC DRG-300 lump breaker. • K-900-DC circular vibrating screener. • 2,000-litre buffer hopper. • Tubular screw feeder. • Maintenance platform with open-grid flooring and safety railings. • Level instrumentation. • Associated pneumatic and electrical components. • Carbon-steel support structure.

Condition: used, empty load weight: 3,580 kg, maximum load weight: 8,320 kg, overall weight: 11,900 kg, axle configuration: 2 axles, first registration: 01/2022, loading space length: 7,100 mm, loading space width: 2,480 mm, loading space height: 2,630 mm, loading space volume: 46 m³, suspension: air, tire size: 245/70R17,5 143J, wheelbase: 990 mm, color: other, gearing type: other, front tire size: 245/70R17,5 143J, rear tire size: 245/70R17,5 143J, driver cabin: other, emission class: none, Equipment: ABS, compressed air brake, tail-lift, Tail lift Dautel DL 1500 L, load capacity 1,500 kg, 4-cylinder aluminum platform 1,800 mm long, 2 roll-off safety devices, with batteries and charging cable, front with portal doors for continuous loading with a short ramp plate, 14 tie-down points. -- Subject to printing errors, errors and changes. Sample images --. More details at: ! Knsdpfozu S N Rox Apmea

Condition: used, maximum load weight: 14,220 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 07/2019, next inspection (TÜV): 05/2026, loading space length: 6,559 mm, loading space width: 2,494 mm, loading space height: 938 mm, total width: 2,550 mm, total height: 2,470 mm, Equipment: ABS, * Folding side walls * Stakes * Stake sockets * Fixed front wall * Storage box * Additional supports at the rear * BPW ZD20 axles with disc brakes * Wabco Trailer EBS-E ----* Tire size: 385/65R22.5 * Technically permissible total weight: 18,000 kg * Tare weight: 3,780 kg * Overall length: 8,280 mm * Next inspection date: 11/2026 ----Vehicle number: 11719----Errors and prior sale excepted----Advertisements and various lettering have been digitally removed.-----We will be happy to assist you with all the formalities involved in purchasing a vehicle. Simply let us know your wishes and suggestions, and we will take care of them. Among other things, we can offer you the following services for an additional charge:----* Trade-in of your old vehicle * TÜV/inspection approval * Complete export processing * Arranging financing * Applying for export license plates * Vehicle delivery * Vehicle registration * Recovery and vehicle transport Knedoycn Uyspfx Apmja ----?YOUR VTS TEAM

Condition: used, maximum load weight: 29,087 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 07/2022, next inspection (TÜV): 08/2026, loading space length: 13,600 mm, loading space width: 2,490 mm, loading space height: 2,750 mm, loading space volume: 93 m³, total width: 2,550 mm, total height: 4,000 mm, Year of construction: 2022, Equipment: ABS, Equipment: Rear impact protection, lift axle, sliding roof, spreader, air suspension with lifting/lowering device, support legs, tread depth: 70% Kedpfszv Awbjx Apmsna Safety & Environment: ABS, disc brake, EBS – Schmitz SCS 24/L-13.62 PEB * Load securing certificate – EN12642 Code XL, VDI2700 for beverages * Edscha sliding roof, safety roof * Multilock outer frame for load securing * 13 pairs of lashing points in the outer frame, 2000 kg tensile force per eye * Joloda full equipment – complete * 3x 9t Schmitz Rotos axles, lift axle * 4x toolboxes * 4 rows of aluminum slats * Tires: 385/65R22.5 ----* Our opening hours * Monday – Friday: 08:00 – 17:00, Saturday: by appointment! * Outside of opening hours, we are available by appointment! * We speak: English, [other languages] * Other: Errors, prior sale and changes reserved * Leasing, financing, trade-in possible * All information without guarantee! ----