Used Back Hoe Loader for sale (6,998)

Condition: good (used), functionality: fully functional, mileage: 13,790 km, power: 90 kW (122.37 HP), overall weight: 6,950 kg, fuel type: diesel, axle configuration: 2 axles, fuel consumption (combined): 10 l/100km, Year of construction: 1979, operating hours: 1,500 h, 1600 operating hours / total mileage 13,800 km! Fuel consumption approx. 10 l/100 km diesel. Front loader: Schmidt FL4 with quick-change bucket and pallet forks. It has spent almost its entire Unimog life stored indoors. Never driven in winter. Absolutely no rust on the underside. Dwedpfszcmx Rsx Albsb Engine: OM 352, 6-cylinder, 5638 cc, 95 hp, economical – approx. 10 liters per 100 km, smooth-running with an authentic, sonorous sound. A true "one-off". This vehicle has accompanied all of my construction projects without any technical failures — now the work is finished. Selling as a collector’s item or for continued use. Includes workshop manual. I purchased the Unimog from the original owner, so I am only the second owner, for the past 14 years. First registered in November 1979. I have only driven it about 2,000 km. Transmission synchronizer rings should be replaced. Permitted gross vehicle weight (GVWR) = 6.95 t (can be driven with an "old Class 3 driver’s license"). This registration is completely tax-exempt! "Self-propelled working machine / excavator." Annual costs only about €250 for insurance plus MOT, no emissions test (ASU) required. The vehicle is currently registered and in use / operational with MOT, everything works! Due to the 43-year service life, especially soft parts and rubbers tend to become brittle and were replaced: - Clutch master cylinder - Shift cylinder (small to large gear group) - 4/2-way valve - Cylinder head gasket The clutch housing is perfectly dry.

Condition: used, functionality: limited functionality, gearing type: hydrostat, fuel type: diesel, color: yellow, Year of construction: 1984, operating hours: 22,962 h, Equipment: differential lock, hydraulics, Selling a used Volvo L50 wheel loader. Reduced lifting capacity due to a faulty hydraulic pump. Engine and transmission are in good condition. Djdezwt Iajpfx Albswb

Condition: used, machine/vehicle number: 1379A, mileage: 1,638 km, power: 179 kW (243.37 HP), first registration: 11/1986, fuel type: diesel, overall weight: 15,322 kg, axle configuration: 3 axles, color: green, gearing type: automatic, Equipment: ABS, all wheel drive, compressor, parking heater, trailer coupling, TUV is made NEW!!! So-KFZ registration , The AM General in a really good condition directly from the Army , Well maintained and maintained, the body is in a super good condition (vehicle from the reserve) , The M944A1 is equipped with: All-wheel drive, 5-speed automatic transmission, transfer case with stowage and off-road gear, power steering (super smooth), air brakes with ABS, 3 front seats, the body has the dimensions: L/W/H 5550 / 2200 / 2200.e L/W/H 5550 / 2220 / 1910mm inside, equipment of the body: lathe, tool cabinet with drawers, grinding stand, welding unit, permanently installed power generator 110 Volt 31KVA driven by vehicle engine (Cummins with 105 operating hours) via auxiliary drive, 2-piston compressor with compressed air tank, air connections in the body, trolley, loader, impact wrench large and small, grinding witch, air connections in the body, trolley, loading device, impact wrench large and small, grinding witch, grinding witch, grinding witch, grinding witch, grinding witch, grinding witch, grinding witch, grinding witch, grinding witch, grinding witch, grinding witch. and small, grinding witch, magnetic drill, vice, large auxiliary heating and ventilation, many sockets, interior lighting, both sides and the rear of the body can be opened, the km are miles, driving license class 2 (truck), tire size 14.00R20 (very good condition) tubeless, top speed 90 km / h, displacement 14011cm? , , 24Volt power supply , The M944A1 has not only Tuv, but also drives reliably :-) can also be insured cheaply as a young timer AM Generalist also already for conversion as a motorhome and long-distance traveler, . All my vehicles can be seen on my homepage. - You are now rushing back and forth from Flensburg to Berchtesgaden to look at the different cars, but here you will find over 150 vehicles of the following types: - Hanomag AL 28, Magirus Deutz, MAN, Steyr, Dodge WC, Saurer, Unimog, GMC 6x6, Steyr-Puch, Iltis, Willys, G-Model, Mowag, DB, etc., and all with TUV. - even with TUV. - There are also an unimaginable number of spare parts and accessories. - Why would you settle for anything less? - Give us a call on 0049 (0)2248 le Gru?e Euer Philipp aus dem Hanfbachtal Djdpsqx Sxaefx Albjwb

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 8696, Year of construction: 2015, operating hours: 7,673 h, load capacity: 5,000 kg, lifting height: 4,500 mm, fuel type: gas, mast type: simplex, construction height: 3,100 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Load capacity: 5,000 kg Lifting height: 4,500 mm Overall height: 3,100 mm MACHINE DETAILS Mast type: Simplex ISO class: 3 (2,500–4,999 kg) Drive type: Internal combustion engine Operating hours: 7,673 h EQUIPMENT Fork positioner Heater Full cabin External reference: SL9839SP Dsdpfezy U Srsx Albjwb

Condition: used, Year of construction: 2019, Suitable for the automatic grinding of HM circular saw blades on the face and top in one setting. All known tooth geometries (flat, alternate, trapezoidal teeth, etc.) can be ground automatically and in one pass. Accessories: Total enclosure, Coolant system, Equipment for robot operation with automatic loading door ND 230 loader Measuring device for measuring saw blades Chip breaker grinding attachment Stepless variable grinding speed of the two grinding spindles from 1600 to 5500 rpm. Djdpfx Alsyvgf Djbewb Grinding speed and grinding path stepless adjustable for each machining surface on the tooth. Automatic central lubrication Software package for oscillation grinding at rake and clearance angles Automatic shut-off flap Automatic fire extinguishing system Electrostatic oil mist separator N281 Measuring tool Sawblade holder with guide bushing Ø 16 mm Saw holder >ø180 Sawblade holder with guide bushing Ø 16 mm Saw holder >ø320 Grinding wheel mounting flange for chip breaker Centering ring for mounting bolt Ø 16 mm for saw bore Ø 32 mm Centering ring for mounting bolt Ø 16 mm for saw bore Ø 40 mm Centering bolt Ø 10 mm Machine light Sawblade blow-off pistol Data input station DES 400 3 loading trolleys with 30 mm mandrels Oil drip tray Automatic central lubrication. Saw blade diameter: 200 - 840 mm Bore diameter: from 16 mm Sheet thickness: up to 15 mm Tooth pitch: from 6 to 180 mm Cutting length: up to 25 mm Rake angle: from - 35 ° to + 20 ° Clearance angle: 0 ° - 25 ° Angled grinding on the back of the tooth: up to 45 ° Angled grinding on the tooth face: up to 30 ° Angled grinding on the negative tooth face: up to 30 ° Tooth height difference: any Grinding wheel diameter: Max. 200 x 32 mm Dimensions W x D x H: 2770 x 1900 x 2058 mm Weight: 4700 kg Connected load: 8.7 kVA (400 V / 50 Hz) colour: gray RAL 7045 / gray RAL 7047

Condition: used, Year of construction: 2019, operating hours: 6,940 h, 2019 | Caterpillar 930M | Used Wheel Loader | 6940 hours 📍Location: Netherlands 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 35900 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 54 inspection points 39 approved ✅ 14 imperfect ℹ️ 1 issues ⚠️ 📌 Inspector's Comment: Technical is machine in good condition , paint and Tyres need are worn and rims and need and some body work need touch up paint front fenders missing. 3 out of 4 tyres are foam filled - right front tire is pneumatic. 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "39841 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed Dsdpfx Aoycmmuolbewb ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: used, Year of construction: 1997, CNC swiss type automatic lathe brand: CITIZEN type: L32 new in: 2003 equipped with: Mitsubishi Meldas control subspindle driven tools back working oil mist removal device for long parts Dedjzwk Iqopfx Albjwb fire extinguishing system chip conveyor bar loader IEMCA BOSS 432 r (Maschine konnten wir nicht starten)

Condition: refurbished (used), Year of construction: 2018, functionality: fully functional, turning diameter over cross slide: 270 mm, turning length: 639 mm, turning diameter: 255 mm, spindle bore: 66 mm, spindle speed (max.): 5,000 rpm, spindle speed (min.): 4,000 rpm, travel distance X-axis: 190 mm, travel distance Z-axis: 500 mm, spindle motor power: 15 W, rapid traverse X-axis: 16 m/min, rapid traverse Y-axis: 12 m/min, rapid traverse Z-axis: 20 m/min, total height: 2,030 mm, total length: 2,840 mm, total width: 2,190 mm, overall weight: 9,300 kg, Equipment: documentation/manual, This CNC lathe has been fully inspected and overhauled directly by the manufacturer, CMZ. The work included replacing the main components subject to wear, restoring the geometries, and completely realigning the machine, bringing it back to a condition of high precision and reliability. Key features: - CNC FANUC 31iTB iHMI - Main and secondary spindles - Double turret with Y-axis - Removable tool presetter - Chip conveyor with lateral discharge - Second high-pressure coolant pump (8 + 15 bar) - Used IEMCA MASTER 80 bar loader available upon request Main overhaul operations: - Replacement of the B-axis slides - Replacement of the belts and seals of the main and secondary spindles - Installation of a new complete secondary spindle assembly - Overhaul of the B and lower Z axis guards - Restoration of the machine's geometries - Realignment of the S1 and S2 spindles - Realignment of the turrets - Complete check of the powered tools Upon request, we can provide a complete list of the operations performed and photographic documentation of the main stages of the overhaul carried out by the manufacturer. For over 30 years, Otto Machine has been selecting and selling used machine tools in Italy and abroad. The machines can be viewed at our showroom or via video call. Dwjdozlymxspfx Albeb Contact us to receive the complete technical data sheet, photographs, videos, and all information about the machine. It is possible to arrange a visit to our showroom or a video call to view it remotely.

Condition: good (used), Year of construction: 2007, functionality: fully functional, CNC long-turn lathe Manufacturer: STAR Type: SV-32 Year of manufacture: 2007 Equipped with: FANUC 16i-TB control system Back-end machining Synchronous spindle Turret Powered tools C-axis High-pressure pump Fire extinguishing system Chip conveyor Dwsdpfx Alszw Hrrebjb Bar loader magazine FMB TURBO 3-36

Condition: good (used), Year of construction: 2016, functionality: fully functional, Model: GL 840 PH H-UV Year: 2016 Impressions: 218 million PQC-S OFF-PRESS CONTROLS (with USB/CF media input) – including overhead amp HIGH SPEED START-UP SMART SEQUENCE SELF DIAGNOSIS II KHS-AI - Pre-linking & removal - Self-learning function - Production management system (diagnostics, maintenance) - Register preset SMART FEEDBACK SIMULTANEOUS PRESETTING OF FRONT/BACK INK KEYS (all units) AIR PRESET FULLY AUTOMATIC PLATE CHANGING – BENDERLESS TRANSFER CYLINDER COCKING REMOTE CONTROL PAPER THICKNESS PRESETS PAPER SIZE PRESET PACKAGE • Sucker head preset • Slow-down wheel preset • Side lay guide • Delivery side jogger • Sheet release cam remote control FEEDER SIDE BLOWER PRESET FEEDER PILE SIDEWAYS CONTROL WITH PIT-LESS SKID LOADER SUCKER HEIGHT REMOTE CONTROL SUCTION TAPE FEEDER (Additional rubber wheels and belts on feeder board) ANTI-STATIC AT FEEDER SUCTION SIDELAY GUIDE FEEDBOARD VENTURI GUIDE ULTRASONIC DOUBLE SHEET DETECTOR REGISTER DETECTION (2-STEP DETECTION) ‘A’ TRANSFER CYLINDER GRIPPER PAD HEIGHT ADJUSTMENT ‘A’ (INFEED) CYLINDER COCKING REMOTE CONTROL ‘A’ (INFEED) CYLINDER ANTI-FANOUT REMOTE CONTROL ANTI-RUST TREATMENT FOR PLATE CYLINDERS ANTI-RUST TREATMENT FOR BLANKET CYLINDERS ANTI-RUST TREATMENT FOR IMPRESSION CYLINDERS ONE-TOUCH BLANKET CLAMP FOR BARRED BLANKET SHEET GUIDE OVER IMPRESSION CYLINDER AIR BLOWER ABOVE IMPRESSION CYLINDER SOLID TRANSFER CYLINDERS + GRIPPER PAD UP/DOWN (one-side adjustment) FULLY AUTOMATIC DOUBLE SIZE 3-CYLINDER PERFECTING UNIT IMPRESSION CYLINDERS WITH STAINLESS STEEL JACKET – after perfecting unit H-UV PROOF OIL SEALS INK DUCTOR INTERVAL ADJUSTMENT MOTORIZED INK FOUNTAIN ROLLER INK ROLLER NIP FOLLOWING INK ROLLER TEMPERATURE CONTROL (oscillation) INK OSCILLATION TIMING REMOTE CONTROL INKER FAN (feeder side on unit) INKER/DAMPENER DE-CLUTCH – all units INK MIST EXTRACTOR FANS (GL40) – New type KOMORIMATIC DAMPENING SYSTEM DAMPENING FORM ROLLER SPEED REDUCTION (Delta Effect) OSCILLATING RIDER ROLLER ON DAMPENING FORM ROLLER BRIDGE ROLLER RIDER ROLLER UNDER DAMPENING FORM ROLLER SKEWING DEVICE ON KOMORIMATIC WATER LEVEL SENSOR Dwsdpfxsy Rmdwe Albeb AUTOMATIC BLANKET CLEANER (H-UV/pre-pack) AUTOMATIC IMPRESSION CYLINDER CLEANING (H-UV/pre-pack) INK WASHING TRAY PNEUMATIC ON/OFF AUTOMATIC INK ROLLER CLEANING – twin nozzles SHEET DECURLER AIR BLOWER ABOVE DELIVERY PILE ANTI-STATIC BAR AT DELIVERY DELIVERY SHEET ANTI-DEVIATION DEVICE AUTOMATIC LUBRICATION ON DELIVERY CHAIN GUIDE DELIVERY AREA SENSOR DELIVERY PILE EXTRACTION – DRIVE SIDE FIXED ROLLERS – A, B & C INTERCOM H-UV DRYER PREPARATION Technotrans Beta.c 280G Alcosmart, digidos.p 150C, FZT 120P. Conductivity display for Beta.c pH value display for Beta.c • PDC-SX (Print Density Control – Spectrophotometer and Automatic Register Control) • KID (Komori Info-Service Display) • Baldwin Ozone-Free Metal Halide H-UV System, including: - 1x H-UV LED – end of press - 1x H-UV LED – before perfecting unit • Technotrans Beta.c 280G • Technotrans external cooling system (installation excluded) • A-APC – Asynchronous Automatic Plate Changing • A-APC / Automatic Blanket Cleaner Parallel Control for GL-40 • K-PressNavi • DC Blowers • Special Ink Misting Cover on All Units

Condition: good (used), functionality: fully functional, mileage: 13,187 km, power: 140 kW (190.35 HP), gearing type: automatic, fuel type: diesel, Year of construction: 2007, operating hours: 13,187 h, Wheel loader Liebherr L556-454, 2plus2 configuration, year of manufacture 2007. Equipped with Liebherr engine D934L A6 delivering 140 kW, automatic transmission, and self-locking differentials on both axles. The stepless 2plus2 drive system and wet multi-disc brakes on both axles ensure high traction and operational safety. The machine features single-lever control, air conditioning, adjustable steering column, and a driver's suspension seat with LFD damping system for enhanced operator comfort. The cab is fitted with a laminated safety glass windscreen, green/tinted version. Additionally, there are 4 working lights at the front and 2 reversing lights. Dwjdpfx Asy Dt A Tslbsb Attachments and special equipment: - 2600 mm lift mast - Piston rod protection for 2600 mm lift mast - 4 Michelin tyres 23.5 R25 XHA*L3 - Quick coupler - Single rail guide for Z-kinematics / 2600 mm lift mast - Single front hydraulic auxiliary circuit and additional hydraulic swing function - Automatic central lubrication system with electric pump and electronic control - Reversible fan drive - Electronic auxiliary module with keypad - Top-Air pre-cleaner - Control lever lift lock for add-on lever set - Operator seat with pneumatic suspension Grammer 24V - Radio installation kit 24V - Rear view monitoring with camera and monitor - German/Luxembourg version - Operating manual GT list A powerful and comprehensively equipped wheel loader, suitable for demanding tasks in construction, recycling, industrial applications, and material handling. Sale is made without warranty and liability.

Condition: excellent (used), functionality: fully functional, power: 60 kW (81.58 HP), Year of construction: 1988, operating hours: 3,500 h, * 3,500 hours * Caterpillar engine 3204 (60 kW) Djdpfx Ajxz Alcolbowb * Operating weight 11,000 kg * Bucket with teeth 1.15 m³ * Immediately ready for use

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 516327000881, Year of construction: 2007, operating hours: 15,936 h, load capacity: 4,000 kg, lifting height: 4,910 mm, fuel type: electric, mast type: duplex, fork length: 1,200 mm, TECHNICAL DETAILS Lifting capacity: 4,000 kg Lifting height: 4,910 mm Free lift: 0 mm Fork length: 1,200 mm Dwsdpezza Stsfx Albob Minimum fork width: 440 mm Maximum fork width: 1,150 mm Number of wheels: 4 MACHINE DETAILS Mast type: Duplex Operating hours: 15,936 h Drive: Electric Battery voltage: 80 V Battery capacity: 930 Ah Dimensions & Weight Dimensions (L x W x H): 2,900 x 1,250 x 3,180 mm Shipping weight: 6,777 kg EQUIPMENT Fork adjustment Side shift Full cabin Radio Joystick Heater Work lights Documentation CE marking

Condition: used, Year of construction: 2019, operating hours: 8,833 h, 2019 | Caterpillar 930M | Used Wheel Loader | 8833 hours 📍Location: Netherlands 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! Dsdpfx Asy Eid Aolbewb 💰 Buy Now for EUR 40700 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 52 inspection points 35 approved ✅ 13 imperfect ℹ️ 4 issues ⚠️ 📌 Inspector's Comment: The machine recently underwent a refurbishment including the installation of new original Cat fenders (L+R) and a replacement windscreen, along with a full wash, repaint, and minor material repairs; however, its actual condition remains critical as it suffers from major operational failures caused by deep-seated electrical corrosion, multiple active warning lights, and a heavily gouged coupler, with the severe oxidation on material edges proving that the metal is being "consumed" and that the recent paintwork was only a cosmetic fix for a structural problem. 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "39790 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, * Mori Seiki NL 2500 SY. * Year 2009. * Y-axis. * C-axis. * 5-axis machine. * 1.5-meter LNS Quick Load bar loader. * Sub-spindle. * 12-station turret, all stations motorized. * Y-axis travel: ±60 mm. * C-axis on both spindles. * Integrated main spindle motor: 18 kW. * Integrated sub-spindle motor: 15 kW. * Direct-drive motor for powered tools: 5.5 kW. * Motor starting torque: 640 N·m. * Motors without belts or gear stages. * Main spindle size: A2-8. * Sub-spindle size: A2-6. * Bar capacity: 80 mm. * 250 mm Kitagawa B-210 main spindle chuck with metric system. * 210 mm Kitagawa B-208 sub-spindle chuck with metric system. * Prismatic guides on all axes. * Main spindle speed: 4,000 rpm. * Motorized tool speed: 6,000 rpm. * Daikin oil cooler for both spindles. * MAPPS 4 conversational automatic programming system. * Automatic force control and tool wear monitor. * Rapid traverse speed: 30 m/min on the X and Z axes. * Turret indexing time: 0.2 seconds. * Two Renishaw arms for automatic tool measurement. * Communication ports via USB, PCMCIA card, and RS-232. * Installation interface for bar loader. Lobtx Tpezladwe Uyshi * Automatic workpiece collector. * Dual pedal for independent opening and closing of the main spindle and sub-spindle. * Side-mounted hinged chip extractor. * Extensive range of static and motorized tool holders. Dwjdpszxm D Rjfx Albob * Electrical transformer. * Documentation, parts list, electrical schematics, programming, and operating manual. * Weight: 5,800 kg. * Machine is currently in operation. * It is essential to check the precision videos. * Immediate delivery, unless sold immediately.

Condition: used, For inquiries regarding the attachment, please contact Mr. Herden at [phone number]. Holp Profile Bucket / PL.080.140 / OQ45-5 / 1,400 mm cutting width / HARDOX / NEW / in stock & immediately available Price: €2,630.00 net / €3,129.70 gross - Excavator up to: 10 tons - Weight approx.: 305 kg - SAE capacity: 393 liters - Cutting width: 1,400 mm - Back width: 800 mm - Bucket made entirely of HARDOX (not just the cutting edge) Advantages of the Holp Profile Bucket: - No damage when rotating the bucket due to the beveled corners - Optimal design due to numerous edges - Stable substructure - Minimal weight due to optimized design - Perfect material flow in the bucket - Advanced bucket floor for optimal filling - Stable cutting edge made of Hardox 450 When precision is required, the profile bucket provides the perfect finishing touch in a workflow: No other bucket models and profiles as precisely and brings comparable efficiency to the processing of your orders as this specially designed bucket. We have a very large selection of various Holp products in our warehouse that are immediately available! Please contact us at [phone number] for more information. Upon request, we will also be happy to provide you with a financing offer. We are the official Holp sales and service partner. We are the official Magni telescopic loader sales and service partner. We are the official Gierking GMT sales and service partner. We are the official OilQuick sales and service partner. We are the official Weber MT sales and service partner. We are the official Westtech sales and service partner. We are the official DMS sales and service partner. We are the official Seppi M. sales and service partner. We are the official JCB construction machinery sales and service partner. We are the official Mercedes-Benz sales and service partner. Dwsdpfx Aoy T Uuvjlbsb We are the official Iveco sales and service partner. In addition, with 800 used vehicles, we are one of the largest commercial vehicle dealers in Germany. We supply the complete Holp range for you! Errors and prior sale excepted! = Further information = New: Yes Intended use: Construction Empty weight: 305 kg Please contact Marius Herden for further information.

Condition: used, Year of construction: 2023, functionality: fully functional, turning diameter over cross slide: 410 mm, turning length: 500 mm, turning diameter: 410 mm, spindle bore: 80 mm, spindle speed (max.): 5,000 rpm, travel distance X-axis: 260 mm, travel distance Y-axis: 90 mm, travel distance Z-axis: 510 mm, spindle motor power: 22,000 W, rapid traverse X-axis: 25 m/min, rapid traverse Y-axis: 12 m/min, rapid traverse Z-axis: 30 m/min, rotational speed (max.): 5,000 rpm, total height: 2,145 mm, total length: 3,272 mm, total width: 2,619 mm, quill stroke: 150 mm, overall weight: 6,800 kg, swing diameter over bed slide: 580 mm, Equipment: documentation/manual, We offer this used Okuma LB3000 EX II MY CNC lathe with ARMROID Automation. Year: 2023. Control: OSP-P300LA Excellent Clean Condition, fully operational and under power. Configuration: Single spindle CNC Turning Center with Armroid Robotic Arm. Main Spindle Seed: Up to 5,000 rpm Spindle Bore / Bar Capacity: 80mm Max Turning Diameter: 410mm Max Turning Length: 500mm Swing Over Bed: 580mm Turret: 12-station live tol turret Spindle Motor Power: 15 kW (20 HP) - (continuous) Y Axis Travel: 120mm (+70 * -50mm) Thermal Stabilization system (TAS for spindle and structure) to mitigate thermal expansion. Tail Stock Integrated Okuma robotic arm system for lights-out operation. Chip conveyor Dwedpszi Ihfsfx Albjb Regularly maintained and in excellent condition - last service September 2025 Byer is responsible for removal and delivery Machine can be used with or without robot loader as required making it very versatile

Condition: used, BRET Press blanking line 830x4 Technical characteristics Width: 100 - 830 mm Thickness: 1 - 4 mm Max. weight: 20 Tn Exterior diameter: 900 - 2100 mm Interior diameter with segments: 610 mm Interior diameter without segments: 508 mm Decoiling: from top or from bottom Engine power: 55 kW Elastic yield (for max. thickness): 650 Rm (Mpa) Tensile strength (for max thickness): 900 Rm (Mpa) Scope of supply 1. 4 arms coil loader turnstile 2. Coil carriage 3. Single cantilevered decoiler with hold down roll 4. Opener & centring unit 5. 17 rolls leveller 6. Pit accumulator entry basket Dwsdpfx Aleymbg Dobsb 7. Exit basket and pulling unit 8. A 700 tons Press 9. Press side exit (2 bands) 10. Double traverse conveyor with deviation and tilting unit 11. Main stacker 12. Side tacker #1 13. Rollway at stacker’s exit #1 14. Side stacker #2 15. Rollway at stacker’s exit #2 16. Video inspection camera system 17. Pallet introduction rollways for side stackers 18. Magnetic scrap conveyor 19. Operator desks 20. Switch cabinets 21. Hydraulics 22. Existing documentation (to be checked) 23. Available spare parts DELTA Measuring system · Number of measured edges: 2 · Width capacity: 100 - 800 mm BRET Leveller · First level rolls: Ø 55 mm · Number: 17 · Thickness: 0,8 - 4 mm · Driving Power: 110 kW Press · Size of press: 800 mm · Blank length: 100 - 1790 mm · Length tolerances: +/- 0,25 mm · Pressure: 320 Tn · Maximum speed: 100 m/min Cuts/min with tensile strength = 500 Mpa · 130 cuts/min for minimum length · 80 cuts/min for 500 mm · 52 cuts/min for 1.000 mm · 38 cuts/min for 1.500 mm Engine power: 55 kW Stacker by gravity · Number of tables: 1 · Length: 1750 mm · Chain conveyor · Positions per table: Length 5 & Width 3 · Maximum stacking height (including wood): 650 mm · Kind of pallets: Wood spacers / Square + plank / Square + square · In-line weighing Side stackers by gravity · Number of exits: 2 bands · Length 100-800 · Tilting device · Stacker height 650 · Buffer system while changing stacking column · Pallet input front the back side · Scale In both exits Magnetic scrap conveyor Video inspection system Width: 100 - 830 mm Thickness: 1 - 4 mm Max. weight: 20 Tn Exterior diameter: 900 - 2100 mm Interior diameter with segments: 610 mm Interior diameter without segments: 508 mm

Condition: good (used), functionality: fully functional, fuel type: diesel, Year of construction: 1999, operating hours: 10,200 h, Equipment: all wheel drive, cabin, Kawasaki 85Z2 wheel loader, weight 19,200 kg, year of manufacture 1999. The loader is in good condition and ready for operation. Location: Ampfing, Bavaria. Transport and delivery possible. Inquiries welcome at any time. Dwodpfxey Rh I Ro Albjb

Condition: used, Year of construction: 2022, operating hours: 2,996 h, 2022 | Hyundai HL975ACVT | Used Wheel Loader | 2996 hours 📍Location: Germany 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 124800 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert Dwodpfszrnxiox Albjb 56 inspection points 54 approved ✅ 2 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: Good operating Wheelloader , all functions work , needs a good clean up , bucketknife needs to be repaired, right step an cap bended 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "41119 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: used, functionality: fully functional, machine/vehicle number: 04310, Year of construction: 1991, operating hours: 18,226 h, load capacity: 6,000 kg, fuel type: diesel, overall weight: 12,050 kg, Kalmar side loaders with double mast. Load capacity up to 6000 kg. Dwjdpfezc Upkox Albsb

Condition: like new (used), Year of construction: 2023, Technical data: Double bending machine Working length: 8200 mm Bending capacity: 2.5 mm CNC control Sheet metal cutting device Back gauge depth: 1250 mm Bending accuracy: +/- 0.5° Bending range: 140° Multi-zone crowning system Bending die width: 10/20 mm Djdpfx Aezz Adfelbjwb Number of gripper fingers: 9 pcs. CE marking Dimensions (length x width x height): approx. 10200 x 2300 x 2150 mm Weight: approx. 12.5 tons Accessories: Sheet metal cutting device Hydraulic unit with oil cooler Bending die lighting Various tools The seller is not liable for typographical or data transmission errors. The machine's appearance, technology, and wear are consistent with its age; used machines are sold without any warranty. Condition: overall in new condition

Condition: excellent (used), Multispindle lathe GILDEMEISTER GM 35 with spindle stop n°4901/0067 with bar loader Giovanni DMB36 year 1999 n°DBM99294 Dsdpfxsix I Dge Albewb - Hydraulic pick-up - Back burring slide - 5 front spindles - 4 long turning slides pos.1, 2, 4, 5 - Part catcher - End of bar catcher - Swarf conveyor - Part belt conveyor

Condition: used, Year of construction: 2023, operating hours: 39 h, 2023 | XCMG XC916E with bucket and forks | Used Wheel Loader | 39 hours 📍Location: France 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 30700 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 56 inspection points 56 approved ✅ 0 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: Machine almost new, thing to note machine equipped with pneumatic brake!! Vibration at the driver's station! 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "40884 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform. Djdpfxezg Ntwo Albewb

Condition: used, Year of construction: 2023, operating hours: 111 h, 2023 | XCMG XC916E with bucket and forks | Used Wheel Loader | 111 hours 📍Location: France 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 30700 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 57 inspection points 56 approved ✅ 1 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: Actually 111 hours nothing to report except the low-end machine battery vibration at the driver's station. 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "40883 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? Dsdpfx Alozg Nubobjwb We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.