Used Atlas Ar 60 for sale (426)

Condition: used, Year of construction: 2022, ---- Data: Frame: Stationary Dcedpjzkzc Sjfx Ailen Light type: LED Dimensions (L x W x H): 500 mm x 500 mm x 2200 mm Weight: 45 kg Mast type: Manual, vertical Maximum height: 3.5 m Power: 1 x 320 W Wind resistance: 50 km/h Mains frequency: 50 Hz

Condition: used, mileage: 1,001 km, first registration: 01/1991, color: grey, driver cabin: other, gearing type: other, Year of construction: 1991, Vehicle location: Bovenden, container locking, rear support Superstructure: Hookable Atlas set-down device on Roland roll-off frame (built 1994) ACCESSORY INFORMATION WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! - . Dsdpfx Ajp N Apajilecn

Condition: used, mileage: 1,001 km, first registration: 01/2001, color: black, driver cabin: other, gearing type: other, Year of construction: 2001, Vehicle location: Bovenden Dcjdpfoxtf Drsx Ailon Body: Atlas City hooklift system type 51/02466 with articulated hook for containers up to 4.2 m. The system was mounted on a D.-Benz LK 817 4x2 with a wheelbase of 3,700 mm. ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale, and errors!

Condition: good (used), Year of construction: 1998, operating hours: 10,300 h, overall weight: 475 kg, fuel type: electric, volume flow: 186 m³/h, operating pressure: 10 bar, pressure (max.): 10 bar, 22kw 3.1m3/min ATLAS COPCO GA22 screw compressor Continuously serviced and maintained 22kw screw compressor for sale. Manufacturer: Atlas Copco GA22 SP operating hours: 10350 Year of manufacture: 1999 Capacity: 3.1 M3/minute, pressure: 10 bar Power 22kw main engine speed: 3,000/min Net weight: 405 Kg Dcedpfxotxpd Ij Ailen Dimensions: mm (LxWxH) Noise level: 66 dB service booklet, circuit diagram.

Condition: used, Year of construction: 2003, Two-way excavator designed for loosening and removing material, either for stockpiling or loading onto a transport vehicle. The machine is used in the following operations: - on railway and tram tracks - maintenance and trackside work - earthworks and roadworks Manufacturer: ATLAS Model: 1604 KZW Year of manufacture: 2003 Weight: 22,000 kg Dimensions: 5.9x2.5 m, height: 3.0 m Engine power: 90 kW Equipment: - air conditioning - Webasto heater - three-section boom Dsdpfx Aiehutkfslocn - front and rear hitch - additional hydraulic outlet for a pneumatic hammer - reversing camera - four hydraulic side supports - joystick control Technical condition: used, operational

Condition: excellent (used), Year of construction: 2018, operating hours: 27,910 h, functionality: fully functional, power: 160 kW (217.54 HP), volume flow: 1,434 m³/h, pressure (max.): 10.4 bar, type of cooling: water, Equipment: refrigerant dryer, type plate available, Tested oil-free screw compressor Atlas Copco ZR160VSDFF. Inverter and dryer integrated. 160 kW 10.40 bar 23.90 m3/min Year of manufacture: 2018 Only 27,910 operating hours Full service history Dcedpfx Aioxbh Ddsljn

Condition: used, mileage: 11,920 km, power: 95 kW (129.16 HP), gearing type: other, fuel type: gasoline, color: yellow, overall weight: 23,000 kg, empty load weight: 21,816 kg, maximum load weight: 1,184 kg, number of seats: 1, first registration: 02/2013, emission class: none, suspension: other, Year of construction: 2013, operating hours: 11,920 h, total length: 7,700 mm, driver cabin: other, construction height: 4,000 mm, Equipment: air conditioning, parking heater, trailer coupling, The used Atlas 1604 K ZW KLIMA two-way excavator is a versatile machine, equipped with a quick coupler and a reliable Deutz engine. The excavator was manufactured in 2013 and has 11,920 operating hours. The machine offers an engine output of 95 kW (129 hp) and a displacement of 4,038 cc. It features a spacious double cab with a heated, air-suspended comfort seat and air conditioning. The vehicle is suitable for use on tram lines, thanks to its narrow axles and special support system. Other equipment features include an Eberspächer fuel heater, a CWF600 particulate filter, and a reversing camera with a monitor. The excavator has a heavy counterweight of 4.5 tons and a swing radius of 2,000 mm, which ensures greater stability and efficiency on the construction site. Dsdpfjr Uzazox Ailecn In addition, the excavator is equipped with a wagon brake system that can be controlled from the cab, as well as an electronic lifting limit to fine-tune the lifting and working cylinders. Inspections are possible during the specified opening hours without prior appointment. Sale is only to commercial businesses (agriculture, freelancers, small and large businesses) or for export. Subject to errors and prior sale.

Condition: used, Year of construction: 2018, fuel type: diesel, output voltage: 400 V, output frequency: 50 Hz, motor manufacturer: Kubota, Mobile Lighting Tower. Atlas Copco QAS20 ST3. Year of manufacture 2018. 20 kVA, 230/400 Volts. 4-cylinder Kubota engine. German registration documents for road approval are available, TÜV/MOT valid until 12/2026. Dedpfx Aiezz Dfwjlocn * 1 lamp is not working and 1 glass is damaged * Video, photos, and further information are also available via WhatsApp! Price net + 21% VAT or net for export with VAT number. We speak Dutch. We speak German. We speak English. Our general terms and conditions apply to all transactions! Machines are sold EX Works Winterswijk (Netherlands) in as-is condition!

Condition: used, mileage: 1,001 km, first registration: 01/2000, color: black, driver cabin: other, gearing type: other, Year of construction: 2000, Vehicle location: Bovenden, container locking mechanism. Dcjdpfsi Rl Tvjx Ailjn Body: Atlas roll-off system with pivoting hook for containers up to 6m. Dismantled from a Daimler-Benz Actros 3340 6x6, wheelbase: 4200mm! ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale and errors!

Condition: used, mileage: 1,001 km, first registration: 01/1997, color: grey, driver cabin: other, gearing type: other, Year of construction: 1997, Vehicle location: Bovenden, rear outriggers, hydraulic cross-locking system. Dcjdpfxei Rqrwo Ailjn Superstructure: Superstructure length 6,350 mm, suitable for containers up to 7 m, approximately 1,700 operating hours, with articulated hook DIN locking system and additional hydraulic cross-locking system. ACCESSORY INFORMATION IS PROVIDED WITHOUT GUARANTEE; subject to changes, prior sale and errors!

Condition: excellent (used), Year of construction: 2016, General information Field of application: Construction Reference number: 4 Weights Empty weight: 1.300 kg Functional Dimensions of cargo space: 200 x 70 x 60 cm CE mark: yes Maintenance, history and condition Number of owners: 1 Technical condition: very good Visual appearance: very good Other information Fits to following machines: 17-29ton Dedpfx Aovpq Tbjiljcn Reconditioned: Yes Delivery terms: EXW Working pressure: 160-180 bar Required hydraulic flow: 155 l/min Strike count: 330-680 Latest inspection: 2025-01-02 Production country: DE Additional information Please contact Ö. Inalkac for more information We offer you Rebuild/overhauled/ überholt Atlas Copco/ Epiroc MB1500 from 2016. This model has New seal kit, retainer pins, bushes, stop pin, chisel/tool, shock absorber, hoses, decals and new painted. More units available. We can ship worldwide. MB1200 HB2000 MB1650 MB1700

Condition: excellent (used), Year of construction: 2016, General information Field of application: Construction Reference number: 4 Weights Empty weight: 1.300 kg Functional Dimensions of cargo space: 200 x 70 x 60 cm CE mark: yes Dcjdsvpq Thjpfx Ailjn Maintenance, history and condition Number of owners: 1 Technical condition: very good Visual appearance: very good Other information Fits to following machines: 17-29ton Reconditioned: Yes Delivery terms: EXW Working pressure: 160-180 bar Required hydraulic flow: 155 l/min Strike count: 330-680 Latest inspection: 2025-01-02 Production country: DE Additional information Please contact Ö. Inalkac for more information We offer Atlas Copco/ Epiroc MB1500 from 2016 with Conti Lube, all bushes, seal kit, 2 guide plate small, 2 guide plate, 2 shock absorber, guide, 2 tool pin, 2 stop pin, chisel, decals, hoses and new painted. MB1600 MB1650 MB1700 MB1200

Condition: like new (used), Year of construction: 2012, Atlas Copco CD 70+ adsorption dehumidifier YOM 2012 Capacity: 4,200 l / min Pressure dew point: -40 ° C Pressure drop: 0.16 bar Maximum operating pressure: 14.5 bar Dsdpfeyzaamox Ailocn Filter sizes: DD / PD 60 - DDp 60 Weight: 120 kg Dimensions: 550 (L) × 364 (W) × 1479 (H) mm inlet air temperature: 35 ° C ambient temperature: 25 ° C operating pressure: 7 bar

Condition: excellent (used), Year of construction: 2017, operating hours: 39,772 h, functionality: fully functional, power: 160 kW (217.54 HP), volume flow: 1,812 m³/h, pressure (max.): 7.5 bar, type of cooling: air, Equipment: type plate available, Screw Compressor Atlas Copco GA160 160 kW Dcsdeyzhccspfx Ailsn 7.5 bar 30.20 m3/min Year of manufacture: 2017 Operating hours: 36,772

Condition: used, functionality: fully functional, fuel type: diesel, Year of construction: 2024, operating hours: 217 h, Atlas Copco XAS48KD construction compressor, mobile compressor used, from business liquidation Technical data according to the manufacturer: Construction compressor Atlas Year of manufacture: 03/2024 Operating hours: 217 hours small mobile compressor with diesel engine, Stage V Engine brand: Kubota Engine model: D902 Emission level: EU emission stage V Engine power at engine speed under full load: 18.5 kW Number of cylinders: 3 Full load / rated speed: 3400 rpm Idle speed: 2000 rpm Capacity of the oil collection pan: 3.8 l 2.4 m³/min Maintenance effort: < 60 minutes 15% smaller footprint Housing length x width x height: 3248 x 1225 x 1290 mm Weight of housing: 596 kg Chassis length x width x height: 1960 x 1230 x 1250 Weight of chassis: 600 kg We recommend an inspection to avoid misunderstandings. Dsdpfx Aijz Hx A Eslecn Information without guarantee Data, information and technical data from the manufacturer To prevent any misunderstandings regarding the item's condition and the scope of the auction, we generally recommend an inspection BEFORE placing a bid! Further technical data can be requested from the manufacturer. Our business hours are from Monday to Friday between 8:30 a.m. and 12:00 p.m. and 1:00 p.m. to 4:30 p.m. During this time, inspections and pick-ups are possible and welcome AFTER prior appointment. Subject to prior sale, changes, errors and printing errors.

Condition: like new (used), Year of construction: 2018, operating hours: 3,769 h, Atlas Copco GA 5 FF screw compressor including refrigerant dryer. Motor & Performance: • Rated power, main motor: 5.5 kW (7.5 HP) • Motor efficiency: Typically IE3 (protection class IP55) • Voltage / Frequency: 400 V / 50 Hz (3 phases) • Starting method: Star-delta Pressure and Flow Rate: 7.5 bar 15.0 l/s (900 l/min) ~54.0 m3/h 8.5 bar 13.2 l/s (792 l/min) ~47.5 m3/h 10 bar 12.5 l/s (750 l/min) ~45.0 m3/h 13 bar 8.4 l/s (504 l/min) ~30.2 m3/h Tank capacity: 270 l Integrated refrigerant dryer: • Pressure dew point: +3 °C • Additional power consumption: approx. 0.22 kW • Condensate drain: Electronic, loss-free Noise Level & Environment • Sound level: 60 to 63 dB(A) (very quiet due to complete encapsulation, installation directly at the workstation is possible) • Permissible ambient temperature: +1 °C to +46 °C Dimensions & Weight: • Length x Width x Height: approx. 1500 mm x 730 mm x 1710 mm • Weight: approx. 360 kg Control: • Type: Elektronikon Operating hours: 1170 h Dedpfx Aioy T Icgsljcn Year of manufacture: 2018 Price: 5000.-

Condition: excellent (used), Year of construction: 2002, operating hours: 46,357 h, functionality: fully functional, Oil-free screw compressor Atlas Copco GA75VSDFF Inverter and dryer integrated. Dedpfxeyz R U Is Ailecn 160 kW 7.5 bar 27.90 m3/min Year of manufacture: 2002 Operating hours: 46,357

Condition: used, mileage: 1,001 km, first registration: 01/2004, empty load weight: 294 kg, color: orange, driver cabin: other, gearing type: other, Year of construction: 2004, Vehicle location: Bovenden. Body: 500mm. ACCESSORY INFORMATION IS PROVIDED WITHOUT GUARANTEE. Subject to change, prior sale, and errors! Dsdsi Rql Hepfx Ailecn

Condition: used, Year of construction: 2006, operating hours: 135,816 h, functionality: fully functional, Oil-free screw compressor Atlas Copco ZR160FF Integrated dryer. Dodpfxsyzxpte Ailocn 160 kW 7.5 bar 28.20 m3/min Year of manufacture: 2006 Operating hours: 135,816

Condition: good (used), Year of construction: 2001, Atlas Copco SF 15 oil-free scroll compressor The SF series utilizes scroll technology, which eliminates metallic contact between the compression elements, meaning that absolutely no oil is required in the compression chamber. This makes the system ideal for applications that require completely clean and oil-free compressed air (e.g., in laboratory, medical, or food processing environments). The three installed scroll compressor elements have recently been overhauled or replaced. Operating hours (total): 15,983 hours (the actual time the compressor has been running since 2001). Controller hours: 99,527 hours (the time the controller was energized). Operating times of the individual scroll elements (compressor stages): Operating hours, element 1: 735 hours Operating hours, element 2: 735 hours Operating hours, element 3: 736 hours Technical data: Dcjdpfx Aiozwmd Ujlen Manufacturer: Atlas Copco Model / Product type: SF 15 (Oil Free Air) Serial number: ATI 502157 Maximum operating pressure: 8 bar(e) Delivery rate (Free Air Delivery): 24.7 l/s Shaft rated power: 14.8 kW Shaft rated speed: 1500 rpm Total weight: 590 kg Year of construction: 2001 Controller: Elektronikon (digital display) Length: 1.21 meters Width: 0.96 meters Height: 1.66 meters "Everything from a single source: We would be happy to offer you suitable bank financing for your project." More items – new and used – can be found in our shop! International shipping costs available upon request!

Condition: excellent (used), Professional industrial screwdriver by Atlas Copco, designed for continuous operation in assembly lines and production applications. True industrial-grade equipment – not a consumer retail product. Specifications and info: • Model: ETP STB34-06-106 • Power supply: 18V DC • Country of manufacture: Sweden • Year of manufacture: 2021 • Ergonomic, well-balanced design • Suitable for precision assembly and serial production Set includes: • Atlas Copco cordless screwdriver • 2x 18V Atlas Copco batteries • Atlas Copco charger • Everything visible in the photos is included Condition: Used, fully functional, with typical signs of use. No cracks, no play in the mechanism. The tool comes from industrial disassembly. Applications: • Manufacturing • Industrial assembly • Production lines • Professional workshops Dcodpfx Ajyc Rvaoilsn An ideal alternative to buying new equipment – significantly lower cost while maintaining Atlas Copco quality.

Condition: repair required (used), Year of construction: 2018, operating hours: 34,881 h, functionality: limited functionality, power: 45 kW (61.18 HP), volume flow: 502.2 m³/h, pressure (max.): 8.5 bar, type of cooling: air, Equipment: type plate available, Screw compressor 45 kW 8.50 bar Dedpfxoz Iz Ito Ailscn 8.37 m3/min Year of manufacture: 2018 Operating hours: 34,881 Problem with the cooling system. The temperature is rising rapidly. The compressor is running.

Condition: used, Year of construction: 2017, machine/vehicle number: D 941 454, overall weight: 16 kg, input frequency: 50 Hz, The Atlas Copco Power Focus PF4000-C-HW is the ideal solution for precise and efficient bolted joints in industry. We offer this used control unit together with the matching ETP ST32-10-I06 bolted joint. Technical specifications: Control unit model: Power Focus PF4000-C-HW, year of manufacture: 2017 Screwdriver model: ETP ST32-10-I06, year of manufacture: 2022 Power supply: 200-240 V/ (50-60 Hz) Power consumption (W): 320 W Maximum operating temperature: +40.0° C Minimum operating temperature: +5.0° C Frequency: 50-60 Hz Dcedpfjulaxzox Ailjn For further details, see the type plates on the control unit and screwdriver in the corresponding pictures.

Condition: used, Year of construction: 2002, functionality: limited functionality, machine/vehicle number: AII 265383, overall weight: 460 kg, power: 15 kW (20.39 HP), fuel type: electric, pressure (max.): 8.5 bar, Equipment: type plate available, We are offering this used Atlas Copco GA15 FF reciprocating compressor, manufactured in 2002. Manufacturer: Atlas Copco Model: GA15 FF Year of manufacture: 2002 Condition: used Operating hours cannot be read; the display has a minor defect (see image). Serial number: AII 265383 Type: screw compressor Dsdpoz Ilf Aefx Ailscn Max. operating pressure: 8.5 bar Shaft speed: 3000 rpm Rated shaft power: 15 kW Effective delivery rate: 40.8 l/s If you have any questions or require further information, please send us a message or call us.

Condition: used, Year of construction: 2014, operating hours: 32,903 h, functionality: fully functional, power: 90 kW (122.37 HP), volume flow: 1,055.4 m³/h, pressure (max.): 13 bar, type of cooling: air, Equipment: type plate available, Atlas Copco GA90VSD screw compressor Inverter integrated 90 kW 13 bar 17.59 m3/min Dcsdpfxsz Ngz Ao Ailsn Year of manufacture: 2014 Operating hours: 32,903 h