Used Anilox Roller for sale (8,377)

Condition: used, Year of construction: 2001, machine/vehicle number: A 01 02 004/ 0300, - Manufacturer: Venjakob - With dust cover including folding doors - Ventilation via fans - Fully covered under the rollers Kjdpfxsumvmqo Agzjwu - Year of manufacture 2001 - Working width 1,300mm - Working height: 900 +- 20mm - Roller diameter: 80mm - Roller pitch: 140mm - Feed speed: ~ 2-8m/min. - Location: in the warehouse - without control cabinet

Condition: used, Roller conveyor, Venjakob, length,1.100 mm Kedpfjumvryex Agzewu - Working width 1.350 mm - Overall width ~ 1.560 mm - roller conveyor height 890 + - 20 mm - Diameter roller 80 mm - Roller pitch 125 mm - all rollers with rubber surface - Feed speed infinitely adjustable by hand wheel 2 - 6 m/min - Length 1.100 mm - Colour 7035, lichtgrau - Voltage / HZ 400 / 50 - Location, in stock

Condition: used, Year of construction: 1997, machine/vehicle number: MR1TLL97037, - Manufacturer Cefla / Sorbini - Type T / 20-SP-1 - year of construction 1997 - Working width 1300 mm - working height 880 - 940 mm - Part height ~ 3 - 80 mm - Operating side right - Filler application cylinder ~250 mm - Hard chrome-plated metering roller 174 mm - Hard chrome-plated smoothing roller 245 mm - Reverse drive - Belt transport - Belt control - Length ~ 1640 mm - width 2590 mm - height ~ 1700 mm - Feed rate 6 - 24 m/min - Total connection 4.5 kW - Weight 2,000 kg - With switch cabinet - Volt, Hz 400 / 50 - Location, not in stock Kwjdjumvpfepfx Agzsu

Condition: used, Roller transport Finnrose 3410mm - Producer Finnrose - Working width 1.400 mm - Diameter roller 65 mm - Roller pitch 100 mm - all rollers with rubber surface - Feed speed infinitely adjustable by hand wheel - Feed speed ca. 2 - 8 m/min Kwedpfx Agoumvq Ajzsu - Length 3.410 mm - Voltage / HZ 400 V / 50 HZ - Location, in stock D-32825 Blomberg

Condition: used, Year of construction: 2001, - Manufacturer Barberan - Type BRB-1400 - year of construction 2001 - Working width 1330 mm - Working height ~ 880 - 900 mm - Part height ~ 5 - 100 mm - Operating side right - Lacquer application roller ~45 Shore - Roller diameter 245 mm Kwodpfx Ageuyky Tjzju - Application cylinder speed 4 - 24 m/min - Quick-change system Application roller - Hard chrome-plated metering roller 174 mm - Dosing roller Speed 4 - 24 m/min - Reverse drive - Solvent-resistant conveyor belt - Double diaphragm pump - Travelling on flanged rollers without - Feed adjustable via frequency converter 5 - 25 m/min - Length: 980mm - Width: 2.800mm - Weight 1,680 kg - Volt, Hz 400 / 50 - Location, in stock - Machine has been overhauled in 2022

Year of construction: 2005, condition: used, Roller transport Finnrose 3.000 mm - Producer Aagaard Finnrose - Year of construction 2005 - Working width 1.300 mm - Overall width 1.380 mm - roller conveyor height 800 mm - Diameter roller 65 mm - Roller pitch 110 mm - all rollers with rubber surface - FU-Regelung für Feed speed - Angetrieben - Length 3.000 mm - Colour 7035 - Motor power 0,37 kW - Voltage / HZ 400 / 50 Kwedpfx Aevupfgjgzou - Location, in stock

Condition: used, - Manufacturer: Hackemack - Working width: 1300 mm - Roller diameter: 65 mm Kjdpfx Asxz Hb Usgzswu - Roller pitch: 100 mm - All rollers with rubber surface - Infinitely variable feed via handwheel - Feed speed approx. 2 - 8 m/min - Length: 1,900 mm + folding table 600 mm, 2,500 mm - Voltage, Hz: 400 V / 50 Hz - Location: In stock, D-32825 Blomberg

Condition: used, Year of construction: 2001, - Producer Bürkle - Type CASC 1400 - Year of construction 2001 - Working width 1350 mm Kjdeumvl Hepfx Agzowu - Working height 900 + - 20 mm - Part height ~ 5 - 100 mm - Operating side, right - Roller for putty EPDM, 240 mm - Qick changes system for roller - Metering roller 198 mm - Smoothing roller hard chromed 240 mm - Belt transport system - Length ~ 1.450 mm - Width ~ 2980 mm - Mobile, with flange of wheel - Feed speed 5 - 25 m/min - With switch cabinet - Voltage / HZ 400 / 50 - Location, on stock - Commodity code 84242000 - Voltage fluctuation max. +/- 5 %

Condition: used, Year of construction: 2001, machine/vehicle number: 9646-11, - Manufacturer: Bürkle - Type: SLC Kjdpfx Agjyifwiozewu - Year of manufacture: 2001 - Right-hand operation - For single-sided application of lacquer - Oscillating application roller squeegee Technical data: - Maximum working width: 1300 mm - Conveyor belt width: 1270 mm - Workpiece thickness 3 - 120 mm - Installation length: ~ 800 mm - Width: ~ 2,800 mm - 1 piece, rubberized application roller, approx. D: 238 mm - Application roller Shore hardness: 45 (can be changed) - 1 piece, chrome-plated metering roller, D: 174 mm - 1 piece, counterpressure roller, D: 186 mm - Transport speed, adjustable from approx. 6 - 30 m/min. - Working height ~ 900 mm - Passage height approx. 3 - 80 mm - Compressed air 6 bar, G1/4 inch, approx. 50 NL/min. - Operating voltage 400 V, 50 Hz, 3 phases - Total connected load approx. 2 kW - With control cabinet - Weight approx. 1,400 kg - Location: in warehouse 32825 Blomberg

Condition: used, Year of construction: 2014, machine/vehicle number: DB4078Q02A, The pictures show the machine in its unrefurbished condition. The offer price refers to a partially refurbished, functional machine. - Manufacturer: Cefa/Sorbini - Type: SMARTCOATER REVERSE MF-EVO - Two application units, one in REVERSE - Roller running directions shown in picture 10 Ksdpfxeyatd Is Agzewu - Year of manufacture: 2014 - Working width: 1,300 mm - Working height: 880 mm - 940 mm - Workpiece height ~ 3 - 80 mm - Operating side: left - Paint application shaft 50 - 60 Shore - Roller diameter: 250 mm - Metering roller: 173 mm - Double diaphragm pump 1 piece for both application machines - Transport system with roller conveyor - Roller conveyor pitch: 150mm - Roller diameter: 100mm - Compressed air connection: 6 bar - Compressed air consumption: 54 NL/min. - Machine length 900 mm - Machine width 3,000 mm - Machine height 1,500 mm - Mobile on flanged rollers - Feed speed ~ 4 - 20 m/min - Application quantity ~ 4 - 50g/m² - Machine weight 2,520 kg - Control cabinet on the machine, traveling with it - With chassis - Total power 5.4kW / 30A - Volts, Hz 400 / 50 - Voltage fluctuations max. +/- 5 % - Location: in storage

Year of construction: 2014, condition: used, machine/vehicle number: DB407803A, Technical data: - Manufacturer: Cefla Kjdpfxoyatdzj Agzowu - Type: TR 3000 - With own control cabinet - Feed speed adjustment ~ 2,2 - 20m/min. - Emergency Stop - Display converter - Year of manufacture: 2014 - Transport length: 3,000 mm - Working width: 1,300 mm - Roller length: 1,450 mm - Working height: 900 +-20 mm - Roller diameter: 65 mm - Roller pitch: 125 mm - Adjustable feed (manual): 3-15 m/min - Installed power: 0.8 KW - Location: in storage

Condition: used, Year of construction: 2001, machine/vehicle number: 9646-27, - Manufacturer: Bürkle - Type: SLC - Year of manufacture: 2001 - Operating side: left - For single-sided application of lacquer - Oscillating application roller squeegee Technical data: - Maximum working width: 1.300 mm - Minimum workpiece length: 350 mm - Maximum workpiece weight: 250 kg - Conveyor belt width 1.270 mm - Workpiece thickness 3 - 100 mm - Machine length: 800 mm - Machine width: 3.200 mm Kodpfxoykuzvs Agzowu - Application roller, rubberized, EPDM approx. D: 238 mm - Application roller Shore hardness: 45 (can be changed) - Metering roller, chrome-plated, D: 174 mm - Counterpressure roller, rubberized, D: 186 mm - Conveyor speed, adjustable from approx. 8-25 m/min. - Working height ~ 900 mm + - 30 mm - Clearance height approx. 3 - 80 mm - Compressed air 6 bar, G1/4 inch, approx. 50 NL/min. - Operating voltage 400 V, 50 Hz, 3 phases - Total connected load approx. 5.5 kW - With control cabinet - Weight approx. 1.450 kg - Location: in stock 32825 Blomberg

Condition: good (used), Included in the delivery: 01x Standard separation bar, used Material color: Sendzimir galvanized Total length: approx. 2,440 mm Separation bar length: approx. 2,365 mm Total height: approx. 65 mm Separator height: approx. 38 mm Profile: 25 x 35 mm (H x W) Single-sided protective cap Weight per piece: approx. 2.19 kg Your contacts at our company: Kjdpfeyk E T Nsx Agzjwu Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is only offered for collection. Should transport or shipping be required, additional costs will apply. These can be queried separately with us, depending on the delivery location or scope of delivery.

Year of construction: 2025, condition: new, functionality: fully functional, electric motor power 2.2 kW, motor speed 1400 rpm, rolling speed 6.9 m/min, pressure of rolls on steel plate up to 1.2 mm, additional pressing rolls included Kodpfxsymc Ucj Agzewu

Condition: excellent (used), Conveyor System Offer for Conveyor System 1. Technical Specification of the Conveyor System • Length: 33 m • Width: 1.8 m • Drive: 6 motors, each 1.1 kW • Maximum load: 1 ton per m² • Chain drive • Centering units: 2 chain conveyors for centering goods in the middle of rollers • Construction: 5 sections of 6 m each and 1 section of 3 m • Year of purchase: 2019 • Price: PLN 1,500 per meter • Includes: Complete conveyor system as specified above. Please provide a number in your reply to simplify contact, e.g. via WhatsApp. Kwsdpfxswpi Hfj Agzsu

Condition: new, Year of construction: 2025, functionality: fully functional, number of straightening rollers: 3, product height (max.): 1,300 mm, total length: 1,700 mm, total height: 980 mm, total width: 600 mm, working width: 1,300 mm, product width (max.): 1,300 mm, overall weight: 160 kg, warranty duration: 24 months, power: 1.5 kW (2.04 HP), actuation type: electric, W11G – maximum material thickness 1.5 mm, with gearbox Kodpsymc Szjfx Agzewu

Condition: new, 3000 mm Working width 360 mm roll diameter 60,0 mm weight max. in kg 900 kg height adjustment 620 - 1055 mm weight 107 kg Furnishing: - Outfeed roller conveyor with stop Kedpfx Agsxaai Ajzowu - Optimal aid for supporting long and heavy workpieces - Roller support steplessly height adjustable and clampable - Safe workpiece support thanks to massive and heavy duty galvanized steel rollers - Universally applicable for e.g. metal circular saws, Band saws, woodworking machines, ... - The roller conveyors consist of a stable Construction made of special profile - Problem-free and efficient material transport for the supply and removal of workpieces

Condition: new, 3000 mm Working width 360 mm roll diameter 60,0 mm weight max. in kg 900 kg height adjustment 620 - 1055 mm weight 66 kg Description: The RB 10 roller conveyor is a particularly practical aid for the support and movement of long and heavy workpieces. It can be used individually and expanded as required and through the Kodpfx Ajxaaf Dsgzjwu retrofittable PVC-coated rollers can also be used for delicate materials. Furnishing: - Infeed roller conveyor - Optimal aid for the support of long and heavy workpieces - Roller support steplessly height adjustable and clampable - Safe workpiece support thanks to massive and heavy duty galvanized steel rollers

Condition: refurbished (used), functionality: fully functional, - Bedeschi RS toothed crusher; - Haendle WMZ toothed crusher 412 A; - GHH 2366 WH 75/60 impact crusher; - Alfa paper shredders; Sawdust grinder, Wood chipper - Haendle HM2080 wet pan mill; - Haendle HM2080a wet pan mill - Breitenbach fine roller mill type PWF 812 800*1200, gap from 0.6 mm, roller shell thickness 95 and 105 mm, drive 90 kW, drive pulley ⌀650, motor pulley ⌀224, productivity at a gap of 0.6-0.8 mm: 40-50 t/h; - Haendle fine roller mill type Alpha WFZH8100b. Commissioned in 1996. Not in operation since 2012. Gap adjustable from 0.6 mm. New roller shells installed. Bearings replaced with the participation of Haendle specialists; - Kema roller mill 1000x800, gap 1-3 mm; - Rieter fine roller mill type GSA 1000x800, gap 1-1.5 mm; Kwsdpsyl Tmmefx Agzeu - Rieter-Werke Haendle roller mill type HW 80х80-HM, gap 0.6 mm; - Haendle mechanical roller mill type WFZ 880A, gap 0.8 mm, 42 t/h

Condition: used, Year of construction: 2021, operating hours: 2,770 h, Empty weight: 16.000 kg Dimensions (LxBxH): 595 x 231 x 296 cm Ksdpsykq A Asfx Agzowu Engine type: Deutz DEUTZ TCD 4.1 L4 156CV Roller width: 2140 mm

Condition: used, functionality: fully functional, power: 18.5 kW (25.15 HP), fuel type: diesel, overall weight: 3,000 kg, empty load weight: 2,300 kg, operation weight: 2,500 kg, Year of construction: 2001, HAMM HD 10 K Kwjdpeyl Sbcsfx Agzju

Condition: excellent (used), Year of construction: 1988, functionality: fully functional, Technical Data Grinding/Workpiece Diameter: up to approx. 300 mm (partially up to 350 mm) Grinding Length/Stroke: approx. 550 mm (slide travel) Module range (for hobbing cutter resharpening): min. module approx. 0.5 to max. module approx. 25 Number of flutes: typically 1–99 pieces (depending on tool set) Grinding wheel diameter: approx. 150–300 mm Grinding wheel speed: up to about 2,700 rpm Centre distance (workpiece spindle): typical range 400–800 mm Swivel/Pitch range: e.g. grinding wheel head swivel 0–15° Kwedpfx Agextiunozsu Machine weight and space requirement: approx. 4.2–4.9 t weight; space approx. 3 × 2.6 × 2.3 m Electrical data: operating voltage e.g. 380 V three-phase, control 24 V, auxiliary voltage 220 V

Condition: used, Year of construction: 2023, operating hours: 2,130 h, Equipment: all wheel drive, Liebherr Crawler / Crawler Tractor Model PR 726 LGP Year of manufacture: 2023 Ksdpfx Agsyl Hbkozswu The machine has only 2,130 operating hours and is in like-new condition.

Condition: ready for operation (used), Three Broich conveyor belts are available, length conveyor belt 1/2/3: 4400/4070/5500mm, width conveyor belt 1/2/3: 1400/1900/1400mm. An on-site inspection is possible. Kodpfjylzh Eex Agzswu

Condition: used, Year of construction: 2013, functionality: fully functional, roll diameter: 50 mm, roll width: 500 mm, roll pitch: 75 mm, total width: 580 mm, total height: 185 mm, total length: 6,000 mm, conveying length: 6,000 mm, construction width: 580 mm, construction height: 185 mm, power: 0.75 kW (1.02 HP), Manufacturer: UNI-XU Year of manufacture: 2013 Overall dimensions (LxWxH) in mm: 6,000 x 580 x 185 Width incl. side panel in mm: 580 Side height in mm: 180 Conveyor length in mm: 6,000 Conveyor width in mm: 500 Conveyor height in mm: 185 Roller pitch in mm: 75 Substructure: none Support roller axle type: plug-in / hexagonal Support roller diameter: in mm 50 Support roller per axle: 1 Support roller material: steel Kwjdpfx Aoylv Aksgzsu Drive: king shaft / centre station Motor type: motor station Motor data: SEW, 0.75 kW Conveyor speed in m/s: 0.44 m/s Net weight in kg: - Condition: used / fully functional Function test: OK