Used Aluminium Foil for sale (3,392)

Condition: used, Year of construction: 2003, functionality: limited functionality, machine/vehicle number: 0 278 06 1192, film width: 700 mm, roll diameter: 700 mm, Used Friz rotary cutter. 1 set of blades has been resharpened. The machine is used and is sold without warranty. Inspection is possible and welcome. Gedpov Radxsfx Agbstt Loading facilities available.

Year of construction: 2020, condition: new, A new Cassel Ferrous In Foil Metal Detector with an aperture of 350mm x 200mm - this unit was purchased new and never used - Metal Detector for industrial foreign body detection - Metal Shark 2A BD - complete with instruction manual in English - ready to ship worldwide from our warehouse. This is a digital metal detector for conveyor applications - housing in stainless steel - Digital control box attached to sensor and IP rated IP54 Ethernet Module enables software connection (auto reporting and remote maintenance) Gjdpfxjt Dkrco Agbett Estimated Sensitivity based on the aperture size is Fe 3.5 - 4.5mm Comments - Sensitivity performance of Ferrous in Foil MD type depends on product speed - The faster the product through the aperture the stronger a metal amplitude becomes. Recommended belt speed minimum is 500mm/sec. Ask for video of system operating

Year of construction: 2020, condition: excellent (used), functionality: fully functional, Layers: 5 Web Width: 1,500 mm Film thickness range: 10–45 μm Output: - 15 μm: up to 745 kg/h - 17 μm: up to 845 kg/h - 23 μm: up to 905 kg/h Final film widths (per bobbin): - 3 x 500 mm - 6 x 250 mm - 3 x 400 mm - 2 x 750 mm Coextrusion Structure / Number of Layers: 5 layers Layer distribution: B / A / D / A / C Percentage: 10 / 35 / 10 / 35 / 10 % Raw materials: - LLDPE: 2.8–5.0 g/10min (190°C/2.16kg) - VLDPE: 2.8–5.0 g/10min (190°C/2.16kg) Extruder "A": 90/33 L/D, Maximum LLDPE output: 800 kg/h Extruder "B": 60/28 L/D, Maximum LLDPE output: 200 kg/h Extruder "C": 60/28 L/D, Maximum LLDPE output: 200 kg/h Extruder "D": 60/28 L/D, Maximum LLDPE output: 200 kg/h Flat die lip width: 2,050 mm Roll width: 2,100 mm Chill roll C1 diameter: 1,600 mm Maximum mechanical speed: 650 m/min MATERIAL FEEDING AND DOSING "A": - 1 main component material feed - 1 additional component material feed - 1 gravimetric batch dosing system (mounted directly on the extruder, 3 components) MATERIAL FEEDING AND DOSING "B, C, D": - 3 main component material feeds - 6 additional component material feeds - 3 gravimetric batch dosing systems (mounted directly on the extruder, 3 components each) Extruder "A": - SML Single-Screw Extruder SML-ES-90/33 - Tool unit: Manually operated screen changer SML-MF-man/90 Extruder "B, C, D": - 3 SML Single-Screw Extruders SML-ES-60/28 - 3 Tool units: Manually operated screen changers SML-MF-man/60 Godsxyuffjpfx Agbjtt Cloeren 5-layer/3-up Stretch Film System consisting of: - 1 five-layer feedblock FG - 1 automatic flat die, 2,050 mm (for automatic die control) - 1 die splitting system for flat die body separation and cleaning - 1 vacuum box, 2,050 mm - 1 triple-chamber vacuum box SML-TC/2050mm Cooling and take-off unit: - 1 casting section SML-CS/2100/650 - 1 electrostatic edge pinning device - 1 thickness measuring unit (X-ray sensor for automatic dies, stretch wrap film) - 1 recovery system for feeding stretch wrap film with vertical scraptruder for SML 90 mm single-screw extruder - 1 antistatic pipe - 1 power supply unit for antistatic pipes Winding unit: - 1 Cast Film Turret Winder Series W4000 for stretch wrap films - Max. end film width: 3 x 500 mm - Number of turrets: 1 - Number of winding shafts: 4 - Winding shaft diameter: 3" - Max. mechanical winding diameter (3" bobbins): 400 mm - Min. winding diameter: 82 mm - Winding tension: 15–100 N/m - Contact pressure: 50–500 N - Cycle time (3" core magazine): 20–25 s - High-speed Cast Film Turret Winder for stretch wrap film—compatible with 3" air shafts, contact winding mode - 1 automatic core and roll handling system W4000 4S1T (per turret) - 1 oscillating frame SML-OF/2100 Control and data logging: - 1 SML Automatic Control System SML-CS-2/SMILE/4 extruder - 1 SML Data Logging System: SMILE Process Analyzer - 1 E-container (20 ft) Chiller: Frigosystem Compressor unit: MSD V 30-37

Condition: used, Year of construction: 2001, functionality: fully functional, Two pneumatically lowered heads with 330 mm diameter saws. Left head – stationary, right – movable. Cutting heads of P models are tilted with the help of pneumatic cylinders. Has a “two-hand” control mode and an instant saw stop device. Gtedpfx Aexytnljgbst General characteristics 1 Motors 2 pcs. x 1.1 kW, 380 V 2 Number of revolutions 3765 rpm 3 Saw diameter 330 x 30 mm 4 Saw head tilt 90º- 45º 5 Rotation -45º- 90º- 45º 6 Max. cutting length 3335 mm, 7 Min. cutting length (all models) when heads are turned inward 45º 420 mm 8 Min. cutting length when heads cut at an angle of 90º 365 mm 9 Max. dimensions of cut workpieces when cutting 45º (HxW) 90 x 100 mm 10 Max. dimensions of cut workpieces when cutting 90º (HxW) 90 x 145 mm

Condition: new, Year of construction: 2025, Production time appr. 4 months Our best-selling briquetting press series + Tried and tested, simple technology for extremely low susceptibility to errors + 25 years of experience, further development and know-how + Several hundred machines in use with satisfied customers + Good price performance ratio Throughput approx. Up to 200 kg per hour * strongly dependent on the material. - in the last test with aluminum granules smaller than 5 mm - approx. 186 kg per hour + the pressed emulsion. - in the last test with aluminum chips smaller than 18 mm - approx. 120 kg per hour + the pressed emulsion. Technical specifications: Motor: 7.5 KW + 0,55 kW Cooler 400 volts / 50 Hz / 3-phase, Front bush: 125 mm, Briquette stroke max .: 100 mm, Briquette stroke opt .: 80 mm, Pump: 80 liters, Storage container approx. 0.5 qbm content (expandable), Diameter: 1200 mm, with agitator discharge, Hydraulic unit complete with oil tank 220 liters Dimensions approx. 2095 x 1600 x 1310 mm lxwxh, Weight 1370 kg, Automatic on-off switching via level indicator CE compliant. . Requirements for the raw material: - Chip length maximum 20 mm - Installation temperature: temperature-controlled room at at least + 5 ° C - The loading must be free of magnetic metals and mineral impurities such as sand, stones, etc. This can result in damage to the pressing tools and / or increased wear Gsdpfxschqxxj Agbjtt

Condition: ready for operation (used), Year of construction: 1980, functionality: fully functional, machine/vehicle number: 52EHD146827, Hello, Godpfew Udy Nox Agbstt We are selling a Kluge platen press. This machine is capable of hot foil stamping, die-cutting, embossing, and debossing on paper and board up to over 3 mm thick. Maximum sheet size with automatic feeder: 356 x 559 mm Without feeder: 431 x 628 mm The machine is in perfect working condition and remains in daily production. The heating plate is new (worth €5,000). Kluge is still in operation as a company and can provide comprehensive training if needed. Feel free to contact me for more information.

Condition: excellent (used), Year of construction: 2013, Maximum saw blade : 400 mm Digital angle display in degrees ( +/- 46 degree ) 2 x pneumatic clamps Hydraulic blade feed Engine size : 1,8 Kw Digital display with touch screen Godpsxx Hwwofx Agbett Hand held barcode scanner 4000 mm infeed with digital pusher 4000 mm manual outfeed with rollers

Year of construction: 2024, condition: new, - Semi-automatic - Saw blade 420 mm - Double mitre - 4 Pneumatic clamps - Spray lubrication system - Roller conveyor 300 cm with length stop - Blow gun - Protective cap Godjgg N A Rspfx Agbott - Technical documentation - 400V

Condition: new, Year of construction: 2026, 1A Gmatick Storage Paternoster (roll rack) The foil storage Paternoster foils is suitable to use for the storage of all 3D-films, it is used as a high storage at the membrane press or as a space-saving storage solution for the 3D foils. With our Paternoster you can storage on very small area approximately 2, 4m x 1, 2m a lot of film rolls (up to 32 rolls of a Ø 300 mm). The required film is thus immediately available at the push of button. Our Paternoster are available from 2.8 m up to 6, 0 m as standard Paternoster. Also special solutions are offered by us, please contact us, we will then find the right solution for your storage. As additional equipment we offer center sleeves, a manual cutting station or the full automatic cutting device and we have also ionization solutions available at Gmatick. • Storage rods ø 42.4 mm • Sleeves inside Ø max. 82 mm,. • Load chain as a hollow pin chain with a breaking load of 100 kN, Gtsdpfxeff Huws Agbot • Chain pitch is 50 mm hole to hole and this is the raster for the positioning of the mounting foil bars. • Control with a key switch (dead man) for on / off • Rotational speed of the chain is approx. 5.5 m / min • Voltage 400 V, 3N; 50/60 Hz or as USA Version 480V 60Hz • Mains cable with CEKON plug 16A fuse protection (by the customer) 10A slow blow • ground load data at least 2, 2 kg / cm² • Side covering over the entire height of the Paternoster, guards from 2, 2 m above floor to top edge of the Paternoster. • Requirement for the installation of the Paternoster is a viable, flat and solid floor, • Floating floors you can’t install a Paternoster. It is forbidden

Year of construction: 2012, condition: like new (used), We have a Buhrs 1000 poly wrapping system available. Year 2013. You could modify this system to paper wrapping if you like. This machine is later on completed with a extra base and two extra rotary feeders SYSTEM INFORMATION System brand: Buhrs Machine type: Buhrs 1000 Poly Wrapping System (max.13.000 c/h) Year: 2013 CONFIGURATION 1 Buhrs 1000 main product feeder, type shuttle feeder 1 Buhrs 1000 master base station 4 Buhrs 1000 rotary feeder 1 Buhrs 1000 module for filmpackaging with double action sealbar, max 13.000 Gedpohid Adofx Agbett

Condition: good (used), 221 USED aluminum proofing boxes with plastic edges. We have 96 units in stock. The device is available to verify in our warehouse (36-068 Bachórz, Poland). Paid options available: renovation / transport / assembly / commissioning of the device. Gedoxwu Dispfx Agbjtt The price is a net price. Our languages: ENGLISH, FRENCH, GERMAN, RUSSIAN, UKRAINIAN.

Condition: used, maximum load weight: 29,850 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 01/2024, next inspection (TÜV): 01/2026, loading space length: 8,500 mm, loading space width: 2,450 mm, loading space height: 1,395 mm, loading space volume: 29 m³, total width: 2,550 mm, total height: 3,000 mm, Equipment: ABS, Kässbohrer K.SKA B / 26-12 / 27 | Aluminium box tipper | First registered 01/2024 | 29 m³ | Excellent condition ---Technical Data--- First registration: 01/2024 * Year of manufacture: 2024 * Manufacturer: Kässbohrer * Model: K.SKA B / 26-12 / 27 * Body type: Aluminium box tipper, tiltable * Volume: 29 m³ * Gross weight: 39,000 kg Gtjdpfx Agjxwf Rgjbet * Unladen weight: approx. 5,265 kg * Payload: approx. 33,700 kg * Registration country: Germany ---Dimensions--- * Overall length: 9,080 mm * Overall width: 2,550 mm * Cargo length: 7,800 mm * Internal body height: 1,395 mm * Superstructure length: 8,500 mm * Fifth wheel height: 1,220 mm ---Chassis & Equipment--- * 3 BPW air suspension axles with disc brakes, 9 t capacity each * Automatic lift axle (EBS controlled, operable from the driver’s cab) * WABCO EBS 2S/2M with RSS stability control * Safety braking system to prevent accidental driving with raised body * 6x tyres 385/65 R22.5 M+S on steel rims (ET 120) * Mechanical aluminium supports (24,000 kg load capacity) * ASPÖCK Europoint III LED lighting system, 24V, ADR compliant * Aluminium side underrun protection according to ECE R73 * Folding rear underrun protection according to ECE R58.3 ---Body--- * High-strength aluminium body, suitable for construction site use * Side walls: 40 mm thick, 500 mm profile width * Floor plate: 6 mm aluminium, wear-resistant * Front wall and tailgate: 5 mm aluminium, reinforced design * Tailgate with mud-tight rubber seal and safety lock * Manual roll tarpaulin system (680 g/m², temperature resistant from -40°C to +70°C) * Steel access platform and control station * HYVA 5-stage cylinder, controllable via pneumatic lever * Body-Fix system for vibration and noise reduction ---Paintwork--- * Chassis: MB 7350 Novagrau * Body: RAL 9006 White Aluminium * Tarpaulin: RAL 9006 White Aluminium * Kässbohrer logos on side walls and tailgate ---Condition--- * First registration 01/2024, excellent condition * Accident-free, immediately available * Ideal for construction site use and bulk transport For further information, please feel free to contact us.

Condition: used, Aluminum silo (plastic granulate silo) standing on foot ring – used – designed for a bulk density of 0.6 kg/dm³ Capacity: 50,000 L Manufacturer: EVS Available quantity: 2 Diameter: approx. 3,500 mm Cylindrical height: approx. 6,900 mm Total height: approx. 8,100 mm (including 1,200 mm roof edge railing) Material: AlMg3 Bulk density: 0.8 kg/dm³ Top head inclination: 15° Gtedpfx Agjww Em Djbjt Cone inclination: 60° Equipment and connections: At the top head: - 1 x manway DN 600 with hinged cover - 1 x vent nozzle - 1 x roof edge safety railing with handrail - 2 x crane lifting eyes - 1 x flange for filling line - 1 x universal flange for measuring and control technology On the shell: - 1 x access door approx. 870 x 1,960 mm - Various pipe holders for filling pipe - 1 x filling pipe NW 80 - 1 x socket for level indicator One of the silos is additionally equipped with a single-flight access ladder with back safety cage. Otherwise as shown in the pictures and drawings.

Condition: new, - Saw blade 400 mm - Double miter Gtedpegg N Axsfx Agbst - 4 pneumatic clamps - Mist lubrication system - Roller conveyor 300 cm with length stop - Blow gun - Protective cover - documentation - 400V

Condition: like new (used), inline Foilsealer and Shrinking tunnel Gsdpfxsg D Nv Tj Agbstt Make: Kallfass Type: semi/automatic shrinking tunnel Modell: Mat 1606-KS1600uni Capacity: 10-15packs/min (depends on product) Frame: Steel Range: 1600(belt)x600mm (W x H) Dimensions: L x W x H = 4000 x 2050 x 1750mm Weight: 900Kg Electric: 380V+N+E, 65Kw Condition: As-is, working condition

Condition: excellent (used), axle configuration: 3 axles, first registration: 06/2016, total length: 8,910 mm, total width: 2,550 mm, total height: 3,700 mm, suspension: air, wheelbase: 6,110 mm, Year of construction: 2016, Steering and lift axle = Further Information = Axle configuration Suspension: Air suspension Rear axle 1: Lift axle; Max. axle load: 9,000 kg; Tire tread left: 55%; Tire tread right: 55% Rear axle 2: Max. axle load: 9,000 kg; Tire tread left: 55%; Tire tread right: 55% Rear axle 3: Max. axle load: 9,000 kg; Steering; Tire tread left: 55%; Tire tread right: 55% Weights Unladen weight: 5,780 kg Payload: 33,220 kg Gross vehicle weight: 39,000 kg Condition Technical condition: very good Visual condition: very good Gtodew Hm Ihjpfx Agbjt Further information Please contact Maarten Busser or Niels Busser for further information.

Condition: used, Die SMIPACK FP 560a ist mit Ihrer kompakte Bauweise besonders für die Verpackung von CDs, DVDs, Büchern, Bilderrahmen oder anderen kompakten Gegenständen geeignet. With its compact design, the SMIPACK FP 560a is particularly suitable for packaging CDs, DVDs, books, picture frames or other compact items. Halb-automatische Winkeleinschweißmaschine - Semi-Automatic Foil sealing machine SMIPACK FP 560a Baujahr / Year 2014 Schweißrahmen 560 x 430mm Produkthöhe / Product high max. 230mm Folienbreite / Foil width max 600mm Folienrollendurchmesser / Foil Roll Diameter max. 300mm Foliendicke / Foil thickness 10-50 µm Leistung / Speed max. 600-1200 PCs/hour Maschinen Abmessungen / Machine dimensions L 2.020 x W 790 x H 1.055mm Maschinengewicht / Machine weight    148 kg Stromanschluss / Power connection     220-240 V, 50-60 Hz Nennleistung / Rated power 2.500W Nennstromstärke / Rated current 12 A Gtjdpfx Asxp H Udsgbst Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: used, Year of construction: 1993, Technical details: mould plates - length / width: 500 x 400 mm Heating: Zweistufen Heizung 4,6 und 6,0 kW control: SPS voltage: 380 V (3x 20A) / 24 DC V work height adjustable: 870 - 970 mm total power requirement: 6 + 2,5 kW dimension machine xH: 2,8 x 1,1 x 1,3 m weight: 570 kg Compact angle welding machine with shrink tunnel PACKAGING MACHINE WITH SHRINK TUNNEL AND COOLING STATION AND SPECIAL COOLING FAN movable/mobile Application areas/products: -div. brochures, plans or other made of paper/cardboard in DIN A 5 / DIN A 6 Applicable films: all half tube shrink films up to 0,060mm Welding system = impulse welding, with teflonized separation seam, adjustable automatic transport of goods into the shrink tunnel further details: -Tunnel passage width: 450mm -Tunnel passage height adjustable to 100, 200, 300 and 400mm -length of the heatable tunnel hood 900mm Gjdpfx Aju Nu Hiegbett -Prod. output of the machine depends on product and film 5 to 20 cycles / minute (manufacturer's data) -max. film width (folded half tube) 550 / 550mm at 25 - 50 my -frame dimension 500 x 500 x 290 mm = max. Verpackungsmaß Heating: -two stage heating 4,6 and 6,0 kW -Fan infinitely variable Cooling station: -outlet 300mm -with blower Conveyor belt: -feed rate 2.5 - 12 m/min -steplessly adjustable i.d. *

Year of construction: 1979, condition: excellent (used), 4 x aluminium silos standing on foot ring, year 1979 - used -, designed for special weight 0,6 Content approx. 53.000 Ltr. diameter approx. 2.400 mm Total height approx. 14.250 mm Weight approx. 1.410 kg documentation: yes, drawing Gtjdjf D Hv Ispfx Agbjt Container with upper conical bottom and lower 60° cone Connections: on topsoil: 1 flange socket DN 80 for filling 1 flanged socket DN 100 on the coat: 1 manhole DN 500 2 sleeves 1 ½" the cone ends in a DN 150 flange otherwise according to drawing and photos. The silos are already dismantled and can be inspected at any time in 76694 Forst.

Condition: ready for operation (used), functionality: fully functional, overall weight: 2,250 kg, Hot Foil Stamping Tiegel / Tiegel Heidelberg GTP Gjdpfx Agsxu Uc Hsbott Size min.: 85 x 102mm Size max.: 340 x 460mm Speed min. min.: 1.500 sph - max. 4.000 sph Punching pressure: 60T Weight approx. 2250kg Online-Video-Inspection by FaceTime Available Immediately - Can be inspect Can be test

Condition: reconditioned (used), Shrinking tunnel / foil wrapper Make: Kallfass Type: semi/automatic shrinking tunnel Model: Combimatic 600 Frame: steel painted Range: max. packet W x L x H = 600 x 380 x 400 mm Capacity: max. 600 packs/min Dimensions: L x W x H = 4 200 x 1 550 x 2 000 mm Weight: 850 kg Power-supply: 380 Volt - 50Hz - 23,5 kW Features: mobile water-cooled welding beam Gedpfxeg D Nyhj Agbjtt automatic / semi-automatic 2 hand control Remark: excellent condition

Condition: used, Die ZAPPE VM ist mit Ihrer kompakte Bauweise besonders für die Verpackung von CDs, DVDs, Büchern, Bilderrahmen oder anderen kompakten Gegenständen geeignet. With its compact design, the ZAPPE VM is particularly suitable for packaging CDs, DVDs, books, picture frames or other compact items. Halb-automatische Winkeleinschweißmaschine - Semi-Automatic Foil sealing machine ZAPPE VM Baujahr / Year 2010 Schweißrahmen 400 x 400mm Produkthöhe / Product high max. 230mm Foliendicke / Foil thickness 10-50 µm Leistung / Speed max. 400-1000 PCs/hour Gtsdpfjxm Tx Rjx Agbot Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: excellent (used), 2 x 55 m³ aluminum silos with extended support ring, ø 3,000 mm (powder silo) Capacity: approx. 55,000 liters Manufacturer: Zeppelin Year of construction: 2005 Quantity: 2 Diameter: approx. 3,000 mm Cylindrical height: approx. 10,025 mm Total height: approx. 11,265 mm Weight: approx. 1,900 kg Bulk density: 0.6 kg/dm³ Material: AlMg3 Connections and fittings: On the top deck: 1 x roof edge railing (ø 3,000 x 1,250 mm) Gedpfx Aswg Dd Hegbott 2 x crane lugs 1 x manhole opening DN 600 1 x flange DN 150 1 x flange DN 100 (filling nozzle) 1 x flange DN 100 1 x flange DN 250 (with pressure/vacuum relief valve) 1 x threaded connection 1 1/2" (full indicator) 1 x threaded connection 1 1/2" (spare) 1 x silo filter (Infrastaub make) On the shell: 1 x filling pipe 1 x access door One of the silos is equipped with a double-flight access ladder with safety cage. The silo terminates in a 60° cone with a DN 150 flange including inspection slide gate. Drawing available Otherwise as per photos.

Condition: good (used), Make: Kallfass Type: semi-automatic Foilwrapper /shrinking tunnel Model: Combi-simplex Frame: steel painted Range: max. pack W x L x H = 600 x 380 x 320 mm Capacity: max. 600 packs/hr Dimensions: L x W x H = 2650 x 1400 x 1650 mm Weight: 650 kg Power-supply: 380 Volt – 50Hz – 11,5 kW Features: mobile semi-automatic Gtedpfxsiaumuo Agbet 2 hand control Remark: good condition (some minor repairs needed)

Year of construction: 2008, condition: used, functionality: fully functional, 3 x 142 m³ Aluminium Silo (Plastic Granulate Silo) Technical Data / Dimensions Available units: 5 Year of manufacture: 2008 Volume: approx. 142,000 liters Type of vessel: Silo Condition: used Suitable for foodstuff: no Design: upright Internal diameter: approx. 3,500 mm Cylindrical height: approx. 14,900 mm Total height: approx. 17,500 mm Weight: approx. 3,500 kg Specific gravity of medium: 0.63 t/m³ Operating pressure: non-pressurized Ground clearance: approx. 770 mm Material / Construction Inner shell material: Aluminium Remarks: Material grade: AlMg3 / AlMgSi3 Support type: support ring/ base frame Gtjdpfx Aoxqr E Regbst Top bottom type: conical head Slope: approx. 15 % Bottom type: cone Cone angle: 60 degrees Top section: 1 x roof edge railing, height: 1,200 mm 1 x walkway with handrail 2 x crane lugs 1 x manhole DN 600 with vent 1 x connection flange for level measurement 1 x welded socket for high level sensor 1 x flange DN 100 (filling) Shell/body: 1 x personnel door (approx. 1,800 x 850 mm) 1 x cable protection tube 1 x filling line DN 100 with TW connection Bottom section: The silos terminate below in a 60° cone with DN 200 flange and emergency shut-off valve, as well as a mounted suction box.