Used Ais for sale (349)

Condition: used, Year of construction: 1993, pressure 63 t stroke 10 - 80 mm no. of strokes 75 - 400 /min distance between columns 1080 / 920 mm dayligth (stroke and adjustment up) 450 mm column travel -side 300 mm table surface area 1000 x 550 mm hole in the table 700 x 160 mm Podpfx Aaevut Ixolopl table height over floor 1080 mm ram surface 900 x 450 mm ram adjustment 80 mm material width 250 mm material thickness 0,3 - 3,0 mm material cross-cut 750 mm² feed length 1,0 – 9999,9 mm power requirement 11,0 kW Weight 9,5 t dimensions of the machine ca. 2,8 x 2,7 x 3,1 mxmxm permitted for automatic mode according to the German Safety Regulations (UVV) with infinitely variable drive (PIV), pneumatic clutch/brake combination (make Ortlinghaus), manual stroke adjustment, motoric ram adjustment, motoric circular oil lubrication, pneumatic counterbalance in ram electronic servo-roll feed Kaiser KWV 250

Condition: good (used), functionality: not functional, space requirement length: 8,000 mm, space requirement width: 4,000 mm, space requirement height: 5,000 mm, overall weight: 8,000 kg, total height: 2,000 mm, total width: 2,100 mm, total length: 5,000 mm, type of input current: three-phase, input voltage: 400 V, power: 22 kW (29.91 HP), shaft diameter: 127 mm, DRAIS" TYPE S8000 double ribbon mixer - Tank capacity approx. 8000 L. Tank: stainless steel construction L x W x H = 3350 x 1800 x 1800 mm Machine sold without motorization but with partial coupling to keep or change Recommended gear motor not supplied 3 x 400 V- 22 KW - 10 rpm - Torque 60940 Nm Pedpou D Ihvofx Aalopl Central drain at 500 mm Sealing by stuffing box Shaft diameter 150 mm Stainless steel cover Product feed via trapdoor 500 x 300 mm - 4 nozzles diameter 80 mm + 1 nozzles diameter 100 mm and two 150 mm diameter lights Overall dimensions L x W x H = 5000 x 2100 x 2000 mm approx.

Condition: used, axle configuration: 3 axles, first registration: 04/2014, suspension: air, tire size: 385/65 R22.5, color: other, Year of construction: 2014, Tyre size: 385/65 R22.5 Axle brand: SAF Brakes: Disc brakes Suspension: Air suspension Pedpfx Aaeyab T Dolepl Rear axle 1: Lift axle; Tyre tread left: 1 mm; Tyre tread right: 2 mm Rear axle 2: Tyre tread left: 7 mm; Tyre tread right: 8 mm Rear axle 3: Tyre tread left: 3 mm; Tyre tread right: 2 mm Damage: none

Condition: used, first registration: 04/2014, color: other, Year of construction: 2014, Damage: none Pjdpfxoyab Tqe Aaljpl

Condition: good (used), The machine used for washing fruit and olives is in good condition Pedpfevtf T Dox Aaljpl

Condition: used, Year of construction: 2017, Manfred Kaiser sorting grab Year of manufacture: 2017 Mounting: MS 10 Podpfx Aaswwf Hdjlepl Cutting width: 1000 mm Weight: 1461 kg Errors and prior sale excepted. Internal vehicle number: 9125 WhatsApp support available! If you have questions about the machine or would like further information, please feel free to contact us conveniently via WhatsApp. WhatsApp WhatsApp

Condition: new, empty load weight: 12,040 kg, maximum load weight: 71,000 kg, axle configuration: > 3 axles, first registration: 06/2025, suspension: air, load capacity: 58,960 kg, • 24V hydraulic power pack • Width extensions • Loading platform 8.90 m Ppsdsx U E A Hjpfx Aalel • Gooseneck 3.45 m, straight section • Width from 2.53 to 3.00 m • Deck height 0.90 m • Beveled rear section • Hydraulic ramps 3 m x 0.90 m • 14 lashing rings • Coupling height 1350 mm • Smartboard • LED lights • 1st axle liftable • 3rd and 4th axle self-steering • Drum brakes • Convoy kit • Length 12.65 m

Condition: used, Year of construction: 1992, Manufacturer : Société Française d'Etiquetage (SFE) Type: Labeller Psdpsx R A Nisfx Aaljpl Use : to apply labels to cartons. Year : 1992 Marking and thermal ink jet printing module: Wolke M600 ADVANCED Control and ejection  

Condition: good (used), Underfloor circular saw, crosscut saw, pull saw, chop saw, sliding table saw, circular table saw, circular saw Podpoi I Hc Uofx Aalepl -Manufacturer: White Paisley, table saw on solid base -Motor power: 6.3 kW / 1430 rpm -Saw blade: Ø 550 mm -Max. Cutting height 180 mm -Cutting width: up to 455 mm -Table height: 850 to 1000 mm -Chip extraction: Extraction system can be supplied at an additional cost -Dimensions 1240/1100/H1500 mm -Weight: 762 kg

Condition: good (used), Tool holder, milling tool holder -Number: 14x SK50 recording -Tool holder: Ø 36 mm -Drill chucks: Surface clamping chucks, reducing sleeves, cutter heads, end mills, spindle tools -suitable for tool changers -Price/Sale: complete -Dimensions: 800/315/H650 mm -Weight: 62 kg Ppedpfx Asb D I Dysalsl

Condition: used, Scissor lift table trolley, scissor lift table, scissor lift table, scissor lift, scissor lift, single scissor lift table -Load capacity: 500 kg -Platform: 1260 x 915 mm -Dimension retracted: 500 mm -Dimension extended: 1115 mm -Max. Stroke: 615mm -Quantity: 1 piece available Ppedpfx Aasdwqpzslol -Transport dimensions: 1420/915/H870 mm -Town weight: 274 kg

Condition: good (used), Hydraulic pump, oil pump, hydraulic power unit, hydraulic pump, electric motor, DC motor, traction motor, drive motor, hydraulic gear pump -Manufacturer: Schwabmüller, hydraulic pump from Kaiser Kraft UNI-GV 10/25 UNI 10/25 pallet stacker Ppedpfxei Dyvte Aaljl -Motor: Type UP 10.5/112.79.89 12 V 1.5 kW -Dimensions: 210/200/H465 mm -Weight: 13 kg

Condition: good (used), geared motor, electric motor -Speed: 32.5 rpm -Power: 0.55 kW -Design: B5 angle -Hollow shaft diameter: Ø 25 mm -Protection class: IP 44 Pjdpfx Aajcwdmxjlspl -Quantity: 1x motor available -Dimensions: 470/155/H240 mm -Weight: 19.1 kg

Condition: used, Tool holder, milling holder, milling tool Ppsdjcx Sdrspfx Aalel -Number: 3x SK50 holders -different designs -Bore chucks, flat chucks, reducing sleeves, cutter heads, shell end mills, spindle tools -suitable for tool changers -Sale: only complete -Weight: 10 kg

Condition: used, Tool holder, milling holder, milling tool -Number: 8x SK50 mounts -different designs -Brill chucks: flat chucks, reducing sleeves, cutter head, shell end mill, spindle tool -suitable for tool changers -is only sold complete Ppjdpfxjb Ecd Ne Aalel -Weight: 32 kg

Condition: excellent (used), Drais RSV 19.1 Dissolver Power: 14.5 kW Speed range: 0-1850 rpm Complete with control cabinet Ppsdpfx Asx Rwtcjalsl Very good, ready-to-use condition, directly from production!!!

Condition: used, Year of construction: 2004, functionality: fully functional, saw band length: 4,150 mm, saw band width: 34 mm, type of input current: three-phase, cutting range round steel at 90°: 260 mm, overall weight: 2,100 kg, cutting height (max.): 260 mm, working height: 650 mm, cutting range square steel at 90°: 260 mm, Year of manufacture: 2004. The machine is fully operational and can be inspected under power. At the end of 2022, extensive maintenance was performed which included, among other things, the replacement of the hydraulic unit, new valves and seals, and the two discs over which the saw blade runs, as well as various other components. Among other features, the machine is equipped with minimum quantity lubrication, a chip conveyor, clamping pressure monitoring, and a chip brush. Ppedpfx Asxzttdealol

Year of construction: 1993, condition: used, pressure 63 t stroke 10-80 mm no. of strokes 65-400 Hub/min Ppsdpolp U E Refx Aalol ram - range of adjustment 80 mm table surface area 1030x550 mm ram surface 920x450 mm hole in the table 700x200 mm 420 mm weight of the machine ca. 10 t

Year of construction: 2001, condition: used, Technical details: lifting capacity: 0,15 t span width: x. 1200 mm arm length:: max. 1200 Lifting height: 2400 mm stroke speed: handgesteuert weight of the machine ca.: 0,42 t dimensions L x W x H: 2,2 x 0,75 x 1,65 m Engine hoist / engine crane Welded sectional steel Lifting movement via lifting beam pneumatic vertical movement (pneumatic pressure cylinder) via hand knob Load hook type SIKA 1, cable safety device Podpju Nvixofx Aalspl movable, braked in vertical position of the drawbar, double wheel swivelling 90° right/left, front area 2x wheels fixed Accessories 2x various lifting straps and 1x chain length approx. 950mm *

Condition: used, Year of construction: 1985, Technical details: Punching capacity: 40 kN air pressure - required: 8 bar ram stroke - adjustable min/max: 6 - 50 mm ram adjustment: 50 mm no. of strokes: 70 - 400 Hub/min Table dimensions: LxB: 480 x 445 mm hole in table: LxB: 250 x 112 mm slowing-down time: 80 ms bei 450 U/min. clamping surface ram: LxB: 420 x 345 mm ram hole: Ø 40 x 230 mm voltage: 380 V Ppedpfx Aju Icwgjalsl control voltage: 220 V frequency: 50 Hz total power requirement: ca. 19 kVA (ca. 7,5 KW) weight of switch cabinet: 0,3 t machine weight ab.: 4000 kg 40t punching press without roll feed/conveyor belt system Operation via control panel / two-hand operation Operation: manual / automatic *

Condition: new, functionality: fully functional, Year of construction: 2024, laser power: 20,000 W, Description BAISON H13 (12 meters) (20 kW) H-BEAM AND PLATES HEAVY DUTY FIBER LASER CUTTING MACHINE GANTRY TYPE WITH ±90° BEVEL HEAD This machine is also for plates, H, U profiles and different shape + inclined cutting. Technical specifications Laser Power 20.000 W (Raycus) Max. work area (L*W*H) 12.000* strait 2.000* bevel 1.200*600 mm Min. work area(W*H) 150*150 mm Max. Speed 40m/min Pjdpfx Aaevcb Aajlopl Max Acceleration 0.4 G X-axis (straight cuts) 2.000 mm X-axis (bevel cuts) 1.200 mm Y-axis 15.000 mm Z-axis 1.000 mm Positioning Accuracy (X/Y) ±0.1 mm/m Repeated Positioning Accuracy (X/Y) ±0.1 mm Power Data 94kw / 151A Power supply 380V/50Hz/3Phases Power Protection Level IP54 Machine Size 20.741*4.373*3.576 mm Machine Weight 8.450kg (Excludes platform) ACCESSORIES INCLUDED IN THE OFFER Laser source RAYCUS 20 kW Special Bevel head ±90° system for cutting H-beams and plates – BOCI Controller system – FSCUT 9200-P Servo motors – VEICHI Reducer – TECHMECH High precision X/Y transmission mode with rack and rails – JT Guide rail – SHAC Industrial cooling/heating system of the laser head and laser source - Dual cooling system – HANLI Proportional valve – AVENTICS Electronic Components – SCHNEIDER / PHOENIX Welded and heat-treated machine bed – BAISON Wireless remote controller Computer with Windows 11 interface, Internet & WIFI Centralized automatic lubrication system Exhaust smoke system with centrifugal fan Operation, maintenance and programming manuals Voltage stabilizer & regulator unit CE mark with safety light barriers Why CNC Top Ten bv - Cnc Top Ten company have over 50 year experience in CNC machines. - And we have more service and sales locations in west and east Europe - our service team know from beginning how to respect service, installation and training. - for this machine the installation and training is 3 weeks. Not included in machine price. - we can offer cost also depend on end-user place and country. - Machines for cutting H-beams profiles and plates - Fiber laser is the green laser technology for the future - (Saving of at least 50% energy costs) - Components / therefore very low-maintenance - Save up to 50% per part through more efficient production - In addition, precise cuts and smooth surface quality - Heavy-duty constructed frame - equipped with world-famous, durable, high-quality components - Complete CE standard Official Seller CNC Top Ten bv Coevorden Netherlands

Condition: excellent (used), Bead mill Drais PM 1 RL-V Ex-protected version grinding tank 1,3 l power agitator 2,5 kW Pedjk D Ac Espfx Aalopl with feed pump Revision in 2005 Very good condition, directly from production!!!

Condition: excellent (used), Bead mill Drais PM 25 RL-V Ex-protected version grinding tank 26 l Ppodpfx Aaok D Agteljl power agitator 24 kW with feed pump Very good condition, directly from production!!!

Condition: excellent (used), Dissolver Drais RN-PI Ppodpfx Aash U R S Aeljl EX protected version Power 6.8 kW/ 0.75 kW Speed range 0-4000 1/min Toothed pulley 20cm Very good condition, directly from production!!!

Condition: good (used), trolley -Simple bucket -Flat press Ppodpfx Aajb A H U Solsl -2x shelves for microfiber mops