Used Air Tank for sale (38,343)

Condition: used, Compressed air system with compressed air compressor and compressed air tank - KAESER SK26 screw compressor (built in 2005) - Gebre GmbH compressed air tank with a capacity of 750 litres (built in 1996), standing on 3 feet with pressure gauge. Additional title: air compressor with compressed air tank Delivery appr.: 2,2 m3/h Max. working overpressure compressor: 10 bar Gksdpfx Agow Tbtko Djf Gross volume compressed air tank: 750 l Max. working overpressure compressed air tank: 11 bar Power: 15 kW Current: 400 V Voltage: 35 A Frequency: 50 Hz Length: 0,8 m Width: 0,8 m Height: 1,03 m Weight: 290 kg Operation / Control: control panel on compressor Base construction: tank vertical on 3 feet Features: air compressor, compressed air tank

Condition: used, functionality: fully functional, Capacity: 176 L Pressure tested, ready to use. We have two pcs in stock, price is for one pc only. Gksdpfjwy Edzsx Ag Def Please check out our other listings as well.

Condition: excellent (used), Year of construction: 2016, operating hours: 13,000 h, functionality: fully functional, power: 45 kW (61.18 HP), fuel tank capacity: 2,000 l, operating pressure: 10 bar, type of cooling: air, Complete compressed air system consisting of: Gedpswz Ul Defx Ag Dokf Atlas Copco Compressor GA15VSD+ Year 2016, approx. 13,000 hours – 15 kW – Max 13 BAR Atlas Copco Refrigeration Dryer FX8 Year 2020 MaBe 500L Tank Year 2011, height approx. 2.15 m Almig AKC300 Activated Carbon Adsorber incl. Condensate Drain Valve SPX Flow Technology EDDSU2 The system is fully functional and has been regularly maintained. Already dismantled and packed on a pallet. Very good condition, see pictures. Forklift available for loading. Collection only by appointment in 75053 Gondelsheim. Shipping by freight forwarder possible, please inquire with postcode.

Condition: excellent (used), Year of construction: 2013, operating hours: 20,900 h, functionality: fully functional, overall weight: 4,500 kg, power: 45 kW (61.18 HP), fuel tank capacity: 2,000 l, operating pressure: 10 bar, type of cooling: air, Complete compressor room Atlas Copco GA75VSD, built in 2013, 46,100 hours - 75 kW - Max. 10 bar Dimensions: L225 x W110 x H195 cm Atlas Copco GA45+, built in 2007, 21,000 hours - 45 kW - Max. 10 bar Dimensions: L205 x W100 x H180 cm Atlas Copco FD245, built in 2013, refrigeration dryer Dimensions: W120 x D110 x H100 cm Dimensions: 2000L tank, built in 2016, height 2.85 m Incl. oil-water separator System is currently still in operation; operating hours may vary. System is fully functional and regularly maintained. Gksdpfx Aov Snn Ieg Dof Maintenance kits and oils are included. Very good condition, see pictures. A forklift is available for loading. Pickup by appointment only in 75053 Gondelsheim. Shipping via freight forwarder is possible; please include your postal code in your inquiry.

Condition: used, Compressed air receiver, air storage tank, pressure vessel KAESER Factory No. 481127K Year of manufacture: 2001 Tank capacity: 1000 litres Operating pressure: 11 bar - hot-dip galvanized pressure vessel - 3 connection fittings with 2" thread Gkodoxpqzuepfx Ag Djf - 2 connection fittings with 1 1/2" thread - 3 connection fittings with 1/2" thread - 2 x small handholes for cleaning - 3 x ball valves - 1 x safety relief valve - pressure gauge - 2 lifting lugs on the top of the vessel Tank diameter: approx. 800 mm Total height: 2300 mm with stand (without attachments) Weight: 230 kg Good condition

Year of construction: 2005, condition: used, content 500 Liter capacity in bar 11 bar Temperature range -10 bis + 50 °C Dimensions (LxWxH) 1,8 x 0,8 x 0,8 m weight ca. 200 kg Used compressed air tank from Maschinen- und Behälterbau Mittweida GmbH. Includes a pressure gauge, 4 outlet connections, and 1 supply connection. Gkodpfx Ajv Rrrnsg Dof

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, machine/vehicle number: 3018/13, tank capacity: 200 l, total length: 1,000 mm, total width: 500 mm, total height: 1,470 mm, overall weight: 93 kg, operating temperature: 55 °C, pressure (max.): 10 bar, Equipment: CE marking, Aircraft compressed air technology, KB 2x100/10 tank battery, in very good condition, year of manufacture 2013 Gkodpfx Agox Ext Ho Dsf The system is type-tested, so no TÜV approval is required Connection valves and pressure gauge are available

Condition: good (used), mileage: 854,497 km, power: 294 kW (399.73 HP), first registration: 06/2007, fuel type: diesel, tire size: 315/60 R22.5, axle configuration: 4x2, wheelbase: 3,800 mm, fuel: diesel, brakes: engine braking, color: white, driver cabin: sleeper cab, gearing type: automatic, emission class: euro5, suspension: air, total length: 5,990 mm, total width: 2,550 mm, Year of construction: 2007, Equipment: ABS, AdBlue, air conditioning, cruise control, differential lock, electric window regulation, fog lights, onboard computer, parking heater, power assisted steering, second fuel tank, spoiler, = Additional Options and Accessories = - Aluminum fuel tank - Heated mirrors - Roof spoiler - Differential lock - EBS - High beam - Hazard lights - Speed limiter - Cab - Light box - Air suspension - Radio/CD player - Disc brakes - Sleeper cab - Sun visor - Auxiliary heater = Notes = EURO 5, VOLVO FH 400 4X2 JUMBO TRACTOR UNIT, FULL AIR SUSPENSION! GLOBETROTTER XL CAB WITH SPOILER AND FENDERS, AUTOMATIC GEARBOX, ENGINE BRAKE, PARKING HEATER, CRUISE CONTROL, LEATHER STEERING WHEEL, RADIO CD/USB, DIFFERENTIAL LOCK, 2X ALUMINUM DIESEL TANKS, 4-POINT AIR-SUSPENDED REAR AXLE, SUNSHADE, LIGHT BOX, LIGHT BAR WITH 4X HIGH BEAM HEADLIGHTS AND HAZARD LIGHTS, DUTCH REGISTRATION DOCUMENTS VIDEO: = Further Information = Technical Information Number of cylinders: 6 Engine displacement: 12,780 cc Gjdpfox Eh Nhox Ag Dskf Transmission Transmission: I-SHIFT, automatic Axle Configuration Brakes: Disc brakes Suspension: Air suspension Front axle: Tire size: 315/60 R22.5; Max. axle load: 7,100 kg; Steered; Tire tread left: 70%; Tire tread right: 70% Rear axle: Tire size: 295/60 R22.5; Twin tires; Differential lock; Max. axle load: 11,500 kg; Tire tread left inside: 30%; left outside: 30%; right inside: 30%; right outside: 30% Weights Unladen weight: 7,295 kg Payload: 11,305 kg Gross vehicle weight: 18,600 kg Condition Technical condition: Good Optical condition: Good Damages: None Identification Registration number: BB-157-S More information Please contact Dave Dorssers, Mike Broere, or Laurens Reiniers for more information. = Company Information = Gast Trucks Venlo B.V. | Up to 30 pictures and a video on request | Since 1998 we have specialized in the purchase, sale, import, and export of used commercial vehicles. Location: Venlo (NL) | 10 km from the border | 70 km from Düsseldorf airport | 55 km from Eindhoven airport (NL). Transport and export documents/registration possible at extra cost to ports in the Netherlands, Belgium, or Germany. Reservation without down payment is not possible!

Year of construction: 2015, condition: used, Serial number: b 201xxxx Please contact ATS Norway for more information Gkjdexvldkepfx Ag Dsf Please provide reference number upon request: 21775 Description: We have a 2015 BFAB asphalt pavers w/ air-controlled canopy for sale. Everything works as it should, according to the owner. The tub itself has a volume of 15 m3. Ready for delivery Own weight: 1 Model: BFAB asfaltbalje m/ luftstyrt kapell

Condition: used, Year of construction: 2004, Manufacturer: Pyrazol year of manufacture: 2004 operating temperature +10- +50 C Gkedpfouf Rxdsx Ag Dsf total diameter: 1500mm height: 21000mm connection: 4x 200mm flanged 2x 3.4 inch + cleaning opening weight: empty 500 kg

Condition: used, Year of construction: 2002, functionality: fully functional, machine/vehicle number: 494391, Specification: Capacity: 2000L Operating pressure PS min: 0 bar Operating pressure PS max: 11 bar Test pressure PT: 16 bar Gkjdpowrhxlofx Ag Djf Operating temperature T min: -10°C Operating temperature T max: +50°C The compressed air tank from OKS Otto Klein GmbH is a reliable solution for storing and maintaining pressure of compressed air in industrial systems. It is designed to ensure stable pressure supply and thus supports the smooth operation of various pneumatic systems. The robust design ensures durability and safety in daily use, while the easy handling allows seamless integration into existing systems.

Condition: used, Year of construction: 1997, Technical details: content: 500 cbm capacity in bar: 11 Gkedpsu Nz S Esfx Ag Def operating pressure: 11 bar weight of the machine ca.: 0,23 t dimensions L x W x H: Ø 620 mm x 1800 mm Pressure tank Pressure vessel according to directive 87/404/EEC Mark of conformity TÜV NORD 2017 Stands on base frame = steel profile frame welded. Connecting pieces: 1/2" with locking valve; 1/2" with plug; 1" with manometer; 1" with plug Connecting piece 2x left/right 1" with hose connection Temperature range min./max.: -10°C / +50°C Equipment: Ceiling support pressure hose (inside Ø 20mm) length 4m Pressure reducer with adjustable double connection *

Condition: excellent (used), axle configuration: 3 axles, first registration: 12/1988, loading space volume: 33 m³, total length: 11,400 mm, total width: 2,550 mm, total height: 3,450 mm, suspension: air, tire size: 385/65 R22,5, Year of construction: 1988, Equipment: ABS, = Additional options and accessories = - Air suspension = Notes = TRANSPORT TO ANTWERP 590 EURO = Further information = Gedpfext Iuaox Ag Dskf Tyre size: 385/65 R22.5 Axle brand: BPW Suspension: Air suspension Unladen weight: 7,600 kg Payload: 34,000 kg Gross vehicle weight: 26,400 kg Number of chambers: 5 Technical condition: very good Optical condition: very good

Condition: used, functionality: fully functional, Good Working order with air tank Gedpfowu Eh Nex Ag Dokf

Condition: new, Year of construction: 2025, Set including LUFT 1500 Inverter Screw Compressor, 1000L Vertical Air Receiver with Accessories, and IZBERG N20S Dryer The LUFT 1500 screw compressor with inverter, combined with a 1000-liter vertical compressed air tank equipped with fittings and the IZBERG N20S air dryer, provides a complete, efficient, and modern solution for compressed air systems. The LUFT series compressor from the Polish brand Cormak represents the latest technology in pneumatics, combining high-quality materials and precision-engineered components. Its low operating costs, ease of maintenance, ergonomic and durable design, and high performance guarantee reliable and efficient operation in industrial applications. Technical Specifications – LUFT 1500 INVERTER Gkodpexnyhujfx Ag Dsf Motor Power: 11 kW Voltage: 400V / 50Hz Output at 0–6 bar: 1620 L/min Output at 6 bar: 1580 L/min Output at 8 bar: 1350 L/min Output at 10 bar: 1230 L/min Outlet Connection (G): 1" Dimensions: 1170 × 730 × 1020 mm Weight: 243 kg Technical Specifications – IZBERG N20S Dryer Inlet/Outlet Connection (BSP): 1" Maximum Operating Pressure: 10 bar Max. Inlet Air Temperature: ≤ 38°C Dew Point Temperature: 3°C Flow Capacity: 2800 L/min Power Consumption: 0.58 kW Power Supply: 230V Dimensions (L × W × H): 420 × 700 × 690 mm Weight: 37 kg Refrigerant Type and Quantity: R134a, 550 g Technical Specifications – 1000L Vertical Air Receiver Tank Capacity: 1000 liters Working Pressure: 11 bar Wall Thickness: 4 mm Diameter: Ø 808 mm Height: 2300 mm Weight: 230 kg Number of Connections: 6 Connection Sizes: 2", 1/2" Dimensions: 230 × 80.8 cm

Condition: ready for operation (used), Air receiver, compressed air tank, pressurized air vessel, Used equipment Manufacturer: Magnet Model: KF 904 Overall dimensions: Width: 800 mm Depth: 800 mm Height: 2680 mm Weight: 1008 kg Year of manufacture: 2016 Gkjdpsxciqnjfx Ag Dsf Operating pressure: 11 Bar Operating temperature: -20°C to +50°C Tank capacity: 1000 liters

Condition: good (used), Year of construction: 2019, machine/vehicle number: 223230, Offer 25279 Technical data: - Tank capacity: 2000 L - Operating pressure: 11 bar Gkodpfjw Ekkwox Ag Def - Maintenance opening - Ball valves - Pressure gauge - Space required: approx. W 1250 x H 2500 x D 1250 mm - Weight: approx. 450 kg

Condition: used, Year of construction: 1994, Technical details: tank capacity: 150 l Gkedpfxeu Nz Tis Ag Dof operating pressure: 11 bar dimensions L x W x H: Ø 550 mm x H: 1,2m weight: ca. 60 kg For sale as shown and described, as an unpressurised tank for a sale at low price. Condensation drain valve at the bottom with hand lever 2 connection pieces 1/2 inch 2 connection pieces on the ceiling side 2 inch with blind plugs Boiler/tank Ø 450 x 1000mm upright on tripod stand Temperature max. +50°C / min. 10°C pressure gauge *

Condition: new, Year of construction: 2024, functionality: fully functional, tank capacity: 5,000 l, total width: 1,310 mm, total height: 5,060 mm, overall weight: 944 kg, operating pressure: 14 bar, pressure (max.): 14 bar, compressed air connection: 14 bar, pressure: 14 bar, temperature: -20 °C, We manufacture the offered series pressure tanks in horizontal and vertical orientation in a wide range of pressure and volume according to the regulations of the Pressure Equipment Directive 2014/68/EU. The directive defines the requirements for pressure equipment for placing on the market within the European Economic Area (EEA). It applies to pressure equipment with a maximum pressure above 0.5 bar above atmospheric pressure. The PED Directive attaches great importance to product safety. The materials used in the construction of pressure equipment must meet strict quality standards in accordance with the directive. The design, production, testing and installation of pressure equipment must be carried out in such a way as to guarantee safety. The pressure tanks have many uses. Argon tanks are used, for example, for welding alloyed and non-alloyed steel and nitrogen tanks are used, for example, in the pharmaceutical, electronics, gas and oil industries. Compressed air tanks are used internally to store and limit pulsation and loss of air produced by compressors. The pressure tanks installed in compressor rooms are also used to cool down the compressed air and fulfill an auxiliary function in compressed air cleaning from water retention and condensate. In addition, the tanks increase the service life of the compressors by reducing the working time. The pressure equipment manufactured by us bears a CE mark and has complete documentation necessary for commissioning approval from the Office of Technical Inspection. Gksdper En Ttefx Ag Def We design and manufacture pressure tanks for the wider industry. At every stage of cooperation - from the inquiry, through the design intention to the collection of the manufactured tank from the supervisory authority - we provide assistance from our team of engineers and inspectors of the notified body. We offer tanks designed to work with various media: Compressed air, oxygen, nitrogen, technical gas, water, bulk containers for the medical and chemical industry. We manufacture in horizontal and vertical orientation in a wide range of pressures and volumes in accordance with the provisions of the Pressure Equipment Directive 2014/68/EU. We have our own design office, which enables us to carry out individual and non-standard projects, for which it has the necessary competences and authorizations.

Condition: good (used), Year of construction: 2013, machine/vehicle number: 581851, OKS Air receiver tank Serial: 581851 Gedpfxoqqhmks Ag Djkf 2013, 300l air receiver tank, working 11Bar,

Condition: new, Year of construction: 2025, Set including LUFT 1500 Inverter Screw Compressor, 500L Vertical Air Receiver with Accessories, and IZBERG N20S Dryer The LUFT 1500 screw compressor with inverter, combined with a 500-liter vertical compressed air tank equipped with fittings and the IZBERG N20S dryer, represents a comprehensive, high-performance pneumatic solution. The LUFT series screw compressor by the Polish brand Cormak features state-of-the-art technology, top-quality materials, and reliable components. Its low operating costs, easy maintenance, ergonomic and robust construction, and high efficiency ensure dependable, trouble-free operation in demanding environments. Technical Specifications – LUFT 1500 with Inverter Motor Power: 11 kW Voltage: 400V / 50Hz Output at 0–6 bar: 1620 L/min Output at 6 bar: 1580 L/min Output at 8 bar: 1350 L/min Output at 10 bar: 1230 L/min Outlet Connection (G): 1" Dimensions: 1170 × 730 × 1020 mm Weight: 243 kg Technical Specifications – IZBERG N20S Dryer Inlet/Outlet Pipe Diameter (BSP): 1" Maximum Operating Pressure: 10 bar Maximum Inlet Air Temperature: ≤ 38°C Dew Point Temperature: 3°C Capacity: 2800 L/min Power Consumption: 0.58 kW Power Supply: 230V Dimensions (L × W × H): 420 × 700 × 690 mm Gkjdpfx Agsxnyfms Dsf Weight: 37 kg Refrigerant Type and Quantity: R134a, 550 g Technical Specifications – 500L Vertical Air Receiver Tank Capacity: 500 liters Working Pressure: 11 bar Wall Thickness: 4 mm Diameter: Ø 600 mm Height: 2098 mm Weight: 145 kg Connections: 6 Connection Sizes: 1 1/4", 2", 1/2"

Condition: new, Year of construction: 2024, functionality: fully functional, tank capacity: 5,000 l, total width: 1,310 mm, total height: 5,060 mm, overall weight: 794 kg, operating pressure: 11 bar, pressure (max.): 11 bar, compressed air connection: 11 bar, pressure: 11 bar, temperature: -20 °C, We manufacture the offered series pressure tanks in horizontal and vertical orientation in a wide range of pressure and volume according to the regulations of the Pressure Equipment Directive 2014/68/EU. The directive defines the requirements for pressure equipment for placing on the market within the European Economic Area (EEA). It applies to pressure equipment with a maximum pressure above 0.5 bar above atmospheric pressure. The PED Directive attaches great importance to product safety. The materials used in the construction of pressure equipment must meet strict quality standards in accordance with the directive. The design, production, testing and installation of pressure equipment must be carried out in such a way as to guarantee safety. The pressure tanks have many uses. Argon tanks are used, for example, for welding alloyed and non-alloyed steel and nitrogen tanks are used, for example, in the pharmaceutical, electronics, gas and oil industries. Compressed air tanks are used internally to store and limit pulsation and loss of air produced by compressors. The pressure tanks installed in compressor rooms are also used to cool down the compressed air and fulfill an auxiliary function in compressed air cleaning from water retention and condensate. In addition, the tanks increase the service life of the compressors by reducing the working time. The pressure equipment manufactured by us bears a CE mark and has complete documentation necessary for commissioning approval from the Office of Technical Inspection. We design and manufacture pressure tanks for the wider industry. At every stage of cooperation - from the inquiry, through the design intention to the collection of the manufactured tank from the supervisory authority - we provide assistance from our team of engineers and inspectors of the notified body. We offer tanks designed to work with various media: Compressed air, oxygen, nitrogen, technical gas, water, bulk containers for the medical and chemical industry. Gjdpfx Ager En Taj Dskf We manufacture in horizontal and vertical orientation in a wide range of pressures and volumes in accordance with the provisions of the Pressure Equipment Directive 2014/68/EU. We have our own design office, which enables us to carry out individual and non-standard projects, for which it has the necessary competences and authorizations.

Condition: excellent (used), Year of construction: 2012, machine/vehicle number: 575531, OKS Air receiver tank Serial: 575531 2012, 500L tank, 11Bar Gkjdpfx Aoqqhtujg Def

Condition: new, Year of construction: 2025, 270 L COMPRESSED AIR TANK – HIGH-QUALITY PRESSURE VESSEL FOR COMPRESSED AIR SYSTEMS Key Features of the 270 L Pressure Vessel Professional Pressure Design – made of high-grade 4 mm thick steel, resistant to pressure and corrosion. UDT Certification and CE Marking – compliance with European safety and quality standards. Working Pressure of 11 bar – suitable for most pneumatic systems, including those with higher demands. Large Capacity – 270 Litres – ensures stable air supply and reduces compressor start-stop frequency. Multi-connection System – 5 connection ports with diameters of 1", 2", and 1/2" allow flexible integration with various installations. High-Quality Finish – durable anti-corrosion coating inside and outside the tank. Universal Mounting Position – vertical design saves space in industrial environments. Gkodpfjxbzalex Ag Def Construction and Technology – Robust Design for Demanding Applications This compressed air tank is engineered for heavy-duty use in industrial settings. The body is made from 4 mm thick structural steel, ensuring resistance to pressures up to 11 bar and enabling long-term operation. All welds undergo strict quality control, and the tank surfaces are protected with a corrosion-resistant coating that withstands chemical and atmospheric factors. The tank includes a nameplate with the CE mark and the notified body number of UDT, confirming its approval for use in the Polish and European markets. The set comes with complete technical documentation, a pressure vessel passport, and material certificates. Standard Equipment Connection Ports: 5 pcs – diameters: 1", 2", 1/2" Nameplate with CE Mark UDT Notified Body Number Complete Technical Documentation and Pressure Vessel Passport Internal and External Anti-Corrosion Coating

Condition: new, Year of construction: 2024, functionality: fully functional, tank capacity: 5,000 l, total width: 1,310 mm, total height: 5,060 mm, overall weight: 649 kg, operating pressure: 8 bar, pressure (max.): 8 bar, compressed air connection: 8 bar, pressure: 8 bar, temperature: -20 °C, We manufacture the offered series pressure tanks in horizontal and vertical orientation in a wide range of pressure and volume according to the regulations of the Pressure Equipment Directive 2014/68/EU. The directive defines the requirements for pressure equipment for placing on the market within the European Economic Area (EEA). It applies to pressure equipment with a maximum pressure above 0.5 bar above atmospheric pressure. The PED Directive attaches great importance to product safety. The materials used in the construction of pressure equipment must meet strict quality standards in accordance with the directive. The design, production, testing and installation of pressure equipment must be carried out in such a way as to guarantee safety. Gkedpfx Asr En S Dog Djf The pressure tanks have many uses. Argon tanks are used, for example, for welding alloyed and non-alloyed steel and nitrogen tanks are used, for example, in the pharmaceutical, electronics, gas and oil industries. Compressed air tanks are used internally to store and limit pulsation and loss of air produced by compressors. The pressure tanks installed in compressor rooms are also used to cool down the compressed air and fulfill an auxiliary function in compressed air cleaning from water retention and condensate. In addition, the tanks increase the service life of the compressors by reducing the working time. The pressure equipment manufactured by us bears a CE mark and has complete documentation necessary for commissioning approval from the Office of Technical Inspection. We design and manufacture pressure tanks for the wider industry. At every stage of cooperation - from the inquiry, through the design intention to the collection of the manufactured tank from the supervisory authority - we provide assistance from our team of engineers and inspectors of the notified body. We offer tanks designed to work with various media: Compressed air, oxygen, nitrogen, technical gas, water, bulk containers for the medical and chemical industry. We manufacture in horizontal and vertical orientation in a wide range of pressures and volumes in accordance with the provisions of the Pressure Equipment Directive 2014/68/EU. We have our own design office, which enables us to carry out individual and non-standard projects, for which it has the necessary competences and authorizations.