Used Agra for sale (1,169)

Condition: used, mileage: 32 km, power: 96 kW (130.52 HP), fuel type: diesel, gearing type: automatic, overall weight: 3,500 kg, first registration: 01/2025, loading space length: 3,533 mm, loading space width: 1,784 mm, loading space height: 1,886 mm, emission class: euro6, color: white, number of seats: 3, total width: 2,474 mm, total height: 2,530 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, Internal number: Subject to errors and prior sale! SPECIAL EQUIPMENT * Airbag (passenger side) * Heated interior mirror including rear window * Cargo space protection package 1: "Easy Clean" cargo floor - wheel house paneling - high side wall paneling * LED lights in the cargo space * Socket: 12-volt connection in the cargo space (D-pillar) * Partition wall (metal) with window * Central locking with remote control - additionally with second key, foldable, with remote control OTHER EQUIPMENT * 1 battery * Axle load increase - front to 1850 kg * Airbag driver side * Anti-lock braking system with electronic brake force distribution including ESP with traction control - hill start assist - crosswind assist - safety brake assist - rollover protection - emergency braking support including emergency brake light * Outside mirrors, electrically adjustable and heated - with integrated indicators * Battery: battery life, battery life programmed to 10 min * On-board computer with consumption and Kilometer information (e.g. remaining range) as well as outside temperature display and Ford ECO mode * Double-wing rear door with 180° opening angle (without window) * Tachometer * Third brake light * Electric window lifter - with quick-down/-up switch for driver's side * Ford Easy Fuel - comfort tank cap and misfuelling protection * Generator, high-performance version * Glove compartment with lockable lid * Interior lighting with delay circuit with reading lights at the front * Air conditioning at the front including dust and pollen filter * Fuel tank 70 l * Cargo area lighting * Steering wheel: artificial leather steering wheel * Steering column, adjustable in height and reach * MyKey key system - individually programmable second key * Fog lights * Emergency call assistant * Package: Technology package 9 - heated windscreen - windscreen wipers with rain sensor - parking pilot system at the front and rear - emergency brake assistant, active (camera-based) - lane assistant with Fatigue warning and high beam assistant, additionally with lane keeping assistant - Headlight assistant with day/night sensor - Cruise control - Fog lights - Ford audio system * Particle filter: diesel particle filter * Radio: Ford audio system with radio and DAB+ - MyFord Dock - FordPass Connect - Loudspeaker, antenna - Audio remote control on the steering wheel - Bluetooth interface - USB connection - Hands-free system * Wheels: Hubcaps * Wheels: Tire repair kit * Wheels: Steel wheels 6.5 J x 16 with 235/65 R 16 tires * Headlight dipped beam: Halogen headlights with daytime running lights * Sliding door entry light automatically when door is opened * Sliding door, right * Mud flaps at the rear * Side protection strips * Power steering Crsdpfx Absttpqys Tsk * Seat belts - Seat belt tensioners and belt force limiters at the front * Seats: Seat package 13 - Driver's seat, 4-way adjustable - Double passenger seat with storage compartment under individual fold-up seat cushions - headrests, height-adjustable - tray integrated in the double passenger seat (fold-out) - inside armrest for driver - lumbar support, manual (driver's seat) - seat cover: fabric * Start-stop system * rear bumper, with integrated step * partition (plastic) at the height of the B-pillar * air recirculation * lashing eyes * immobilizer * heat-insulating glazing, slightly tinted * central locking with remote control * second key with remote control * overhead storage compartment at the front ... and much more----1st hand. German ve

Condition: used, maximum load weight: 30,753 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 07/2023, loading space length: 9,800 mm, loading space width: 2,440 mm, loading space height: 2,100 mm, loading space volume: 50 m³, Equipment: ABS, VEHICLE NUMBER: TP2821 ----* Exterior features: * Surface-mounted rear hatch with seal * Pneumatic locking system * Additional tension locks for rear hatch * Reinforced rear wall * Grain pusher and grain discharge hopper with bag * Fully welded cross members on the body floor * Bracket for broom and shovel * Loading pressure gauge * Work platform with access steps * Hydraulic hose holder for work platform parking position * Drop legs for full load * Aluminum rims * Roll-top tarpaulin * LED work lights * LED taillights with dynamic flashing lights * Folding underride guard ----* Technology: * ROTOS axles with disc brakes * Lift axle on 1st axle * Tires 385/65 22.5 * Automatic lowering during tipping * Tipping cylinder 190-250 bar * Screw coupling 1" internal thread * Body floor 5 mm * Fifth wheel height 1,150 mm * Loading height 3,655 mm * Unladen weight 5,847 kg Cedpfswklydjx Ab Terk ----* Rental offer: €69 per day, term as desired, flexible return possible at no extra cost * Delivery to your location is available. Trade-in/leasing/financing. We make it possible!

Condition: used, operating hours: 7,041 h, power: 53 kW (72.06 HP), gearing type: mechanical, fuel type: diesel, first registration: 02/1979, color: beige, overall weight: 4,580 kg, mileage: 7,041 km, suspension: other, number of seats: 2, Equipment: all wheel drive, cabin, HU/AU new, diesel all-wheel drive, year of manufacture 1979, 53 kW, 3,758 cm³, 7,041 operating hours, cab, 2 seats, 40 km/h, rear hydraulics, agricultural version, new tires, new brakes, new universal joints, German papers, permissible total weight 4,580 kg. FOR US, CONDITION AND GUT FEELING ARE DECISIVE, THE PRICE COMES SECOND. If you have any further questions, Mr. Faller will be happy to assist you at the number provided. //*TRADE-IN, ACCEPTANCE OR PAWNING OF YOUR VEHICLE, AS WELL AS FINANCING POSSIBLE! All information without guarantee* More offers can be found on our homepage. The description and specified data do not constitute a guarantee and are non-binding. The binding purchase contract is the one concluded at the dealership upon purchase of the vehicle. Errors and prior sale reserved! Crjdswrrw Eopfx Ab Tsk

Condition: reconditioned (used), Year of construction: 1991, Asteca percutor primary set 1850x1600 mm mouth. Credpfx Asiudtreb Tok -Feeder of articulated plates 1500x7500 mm renovated. Pre-screener bars or discs optional. Electric motor 415 hp, belts, protection. . Assembly mounted on semi-mobile metallic structure chassis. -Spare motor

Condition: good (used), Included in delivery: 01x holder f. slide-through protection, used material color: sendzimir galvanized total length: approx. 200 mm total width: approx. 80 mm opening dimension: approx. 42 x 37 mm (WxH) for rectangular tube: 40 x 35 mm hole spacing: approx. 50 mm number of drill holes: approx. 2 pieces drill holeØ: approx. 9 mm material thickness: approx. 3,00 mm Codpfepbcfgsx Ab Tork weight/pc.: 0,320 kg Your contact person in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch General information about the item: This item is offered for pickup only. A desired transport or shipment of this or a dispatch of this article is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery can be requested from us.

Condition: new, Glass bead nailer "2 P Jumbo automatic E.C." - new - Your advantages: - The corner connections are closed - No open glazing bead joints - There are no color differences when painting - The glazing bead frames are easy to assign Clamp corner joining machine 2P Jumbo Automatic E.C. for clamping glazing bead frames. Choice between automatic and manual operation; With angle system, clamping device from above and front Pressure can be regulated separately. Inserting parallel and superimposed ones Clamps possible via electronic programming control. Stapler can be mounted on a suitable work table, Operation via foot valve. ----- Price in this version on request! Plus packaging/shipping ----- Pictures show Clamp corner joining machine 2P inlcuding the option of movable work table (please find details as follows under additional prices) Additional prices: ----- Movable work table height adjustable from 700 - 1000 mm, 2 pieces of support bars can be plugged in 1000 mm long, 2 pieces swiveling and sliding Support bars 1000 mm, support bars covered with felt, 4 swivel castors, 2 of which have a stop device. ----- Additional price: 992.00 euros net Brackets: packages Csdpfjvnh T Nex Ab Tork 15 mm brackets (package of 2000): Price 21.00 euros 12 mm brackets (package of 3000 pieces): Price 31.00 euros 10 mm staples (package of 3000 pieces): Price 31.00 euros Dimensions and weights ----- Jumbo Automatic E.C 470 x 370 x 300 mm, 35 kg Work table 32 kg All prices net. plus statutory VAT Ex works plus packaging and shipping (technical data according to manufacturer - no guarantee!)

Condition: good (used), Included in delivery: 01x holder f. slide-through protection, used Material color: orange total length: approx. 130 mm Credpfx Abepbbrme Tek total width: approx. 160 mm opening dimension: approx. 52 x 34 mm (WxH) for rectangular tube: 50 x 30 mm hole spacing: approx. 100 mm number of drill holes: approx. 2 pieces drill holeØ: approx. 9 mm material thickness: approx. 4,00 mm weight/pc.: 0,640 kg Your contact person in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch General information about the item: This item is offered for pickup only. A desired transport or shipment of this or a shipment of this article is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery can be requested from us.

Condition: new, Clamp length , mm Clamp width , mm 0 , Nm Painting aid for painting the sash and glazing bead frame at the same time RU-LH painting aid for glazing bead frames for processing staples L=50mm Length 700 mm, width 500 mm, working height adjustable from 700 - 1200 mm. At the 4 corners 1 bracket is placed on each of the glazing bead frames. The positioning is done diagonally and in such a way that the brackets protrude approx. 35 mm from the wood, When pressed into the sash frame, a clamping. The glazing bead frame is ready for painting Positioned at a distance of approx. 20 mm in front of the sash. After drying or before installing the sash the glazing bead frame is flush with the sash Cedsxpi Efspfx Ab Terk pressed and only removed again before glazing. The clamps can then be pulled out again by hand become. Stand frame with support table vertical 85°, adjustable in inclination. 2 pieces compensation frames for different glazing bead thicknesses, operation via foot valve. Price on request plus packaging and shipping Option with extra charge: Package of brackets 26 x 50 mm, 4,300 pieces each EUR 74.00 You can find recordings of the painting aid at the end of the video below! (technical information according to manufacturer - no guarantee!)

Condition: ready for operation (used), functionality: fully functional, working width: 2,500 mm, bending angle (max.): 90 °, sheet thickness (max.): 4 mm, overall weight: 4,300 kg, TECHNICAL DETAILS Bending angle: 0 - 90 degrees Bending width: 2,500 mm Max. bending thickness: 4 mm Max. jaw opening: 100 mm MACHINE DETAILS Cedpfxox A Uf Dj Ab Tjrk Weight: approx. 4,300 kg EQUIPMENT Additional tools (as per images) Wiring diagram

Year of construction: 2024, condition: used, functionality: fully functional, machine/vehicle number: G21SJ24083161025, WAREHOUSE SALE – SPECIAL PRICE ON REQUEST! The iCombi Pro is the latest combi steamer from RATIONAL. The iCombiPro 20-1/1 Gas model with 20 GN 1/1 tray slots is simple to use, even for untrained staff, delivering outstanding food quality without the need for constant supervision. Ultra-fast interim and self-cleaning functions keep your appliance spotless. The unit has been tested in our in-house specialist workshop and is fully operational. You will receive an invoice showing VAT separately. These are recent original photos of the actual item. The combi steamer will be available from week 51. Service: We are happy to arrange certified Rational customer service for you throughout Germany. Looking for a specific Rational model? Contact us – we have access to a large selection of used and new equipment. We offer expert advice on all device types, including SCC, CM, CMP, VCC, iVario, iCombi Classic, and Pro. Our equipment service for you: • 6-month warranty on all electrical components • High-quality branded units at fair prices • Professional, competent advice – before and after purchase • Flexible options for shipping or pickup • Provision of user manuals, wiring diagrams & spare parts • Complete range of accessories at attractive prices Condition: Used, tested, and fully functional Technical Data: • W x D x H: 877 x 913 x 1872 mm • Minimum door opening for transport (WxH): 900 x 1900 mm • Serial number: G21SJ24083161025 • Year of manufacture: 2024 • Max. loading quantity per tray: 5 kg • Max. total load: 100 kg • Weight (gas unit): 273 kg • Electrical connection requirements: • Voltage: 1 NAC 230 V • Gas connection rating: 42 kW • Fuse: 63 A • Water supply requirements: • Water inlet (pressure hose): 3/4 inch • Drain: DN 50 Additional Information: • Temperature range: 30°C to 300°C • Senses current cooking chamber conditions • Detects tray load size, quantity, and product condition to determine browning • Learns and automates frequently used cooking habits • Calculates the ideal cooking path for desired results • MyDisplay – user-customizable, personalized control panel • TFT color display and touchscreen • Operating and user manuals available on device display • Core temperature probe with automatic error correction for misplacement and positioning assistance • Double-glazed, energy-saving door • LED interior lighting • Energy consumption indicator included • Precise humidity measurement and adjustment • Individually programmable: at least 350 cooking programs with up to 12 steps each • Three-stage steam injection adjustment • USB interface Credpfx Abjx Dtkbe Tjk • High-performance fresh steam generator with automatic descaling • Five programmable fan speeds Shipping: • Delivery or self-collection by arrangement • Worldwide shipping available on request • Shipping to islands or mountain stations only by prior arrangement

Condition: excellent (used), Crab unit by KONECRANES, type: CXT4410050P3M5FBLON, year 2002, including electrical diagram. Load capacity: 5000 kg, max lifting height: 6 m, with fast and fine lifting, and pendant control. In very good condition. Crjdpfexiw Nrex Ab Tjk

Condition: ready for operation (used), Year of construction: 2000, pressure 85.0 t chamfer lenght 2050 mm distance between columns 1650 mm column arm 400 mm stroke 240 mm dayligth 320 - 560 mm ajustment speed 150 mm/sec working feed 15.0 mm/sec return speed 150 mm/sec back stop - adjustable 5.0 - 1000 mm table width 110 mm Codpfjxab Ugox Ab Tsrk work height max. 1050 mm operating pressure max. 297 bar compressed air 4.5 - 6.0 bar oil volume 200 l operating pressure 340 bar total power requirement 7.5 kW weight of the machine ca. 5900 kg range L-W-H 4100 x 2100 x 2750 mm with increased installation height / piston stroke well-maintained condition (!!) - in checked condition - machine video - ?v=ikl6RNZWeiU Equipment: - CNC electro-hydraulic press brake - including CYBELEC CNC control * swiveling control panel at the front right * external screen - CNC axis adjustment: Y1 - Y2 - X - R - Z1 - Z2 - I + CNC crowning - CNC electro-motorized back stop (X axis) * Travel range .. 5.0 - 1,000 mm * Travel speed .. 250 mm/sec. - CNC electro-motorized height adjustment of the back stop (R axis) * Travel range .. 70 - 235 mm * Travel speed .. 100 mm/sec. - CNC electro-motoric adjustment of the stop fingers (Z axes) * Travel range Z1 .. 405 - 1.565 mm * Travel speed .. 1.000 mm/sec. * Travel range Z2 .. 485 - 1.645 mm * Travel speed .. 1.000 mm/sec. - CNC electro-motoric table crowning - CNC pneumatic die displacement (I axis) - EHT pneumatic tool clamping - upper tool - EHT manual tool clamping - lower tool * Tool holder 90.0 mm + 13.0 mm possible - 1x freely movable 2-hand/foot control - 2x front, stable support arms including "sliding system" - side protective device (swinging doors) - rear protective device (swinging door) - original operating instructions + circuit diagram etc. * Special accessories included: - Oil cooler for use in continuous operation

Condition: reconditioned (used), Year of construction: 2002, operating hours: 44,590 h, functionality: fully functional, pressing force: 200 t, filling opening width: 1,020 mm, filling opening length: 2,000 mm, bale width: 1,100 mm, bale height: 1,100 mm, oil tank capacity: 3,100 l, power: 150 kW (203.94 HP), year of last overhaul: 2025, Technical data baler: Manufacturer MACPRESSE EUROPA S.R.L. Typ 112 Year of construction 2002, partially refurbished in December 2025 Operating hours 44,590 hours, stand December 2025 Codpfjx Dnb Uox Ab Terk Press power main press 200 tons Specific press capacity 16,5 kg/cm² Feed channel 2,000 x 1,020 mm Filling volume 2,65 cm³ Theoretic throughput rate 795 m³/h Bale size 1,100 x 1,100 mm, length variable Driving motor 2 x 75 kW Tying system 5-fold horizontal, full automatic Throughput rate at MSW approx. 48 up to 54 tons/h, depends on material Volume hydraulic oil tank 3,100 l Machine weight baler approx. 50,8 tons Scope of delifery: 1 piece baler MACPRESSE, type 111A 1 operating manual with CE declaration, electrical and hydraulic circuit diagram Comments: The machine was serviced and partially overhauled in our workshop. The following work was carried out and parts replaced: • Hydraulic oil tank emptied and cleaned • Oil and air filters replaced • New hydraulic oil filled • All hydraulic hoses replaced • Press ram dismantled, broken down into individual parts, mechanics made operational • Front two main rollers replaced • Knives on the press ram replaced • Main hydraulic cylinder dismantled, disassembled, cylinder tube and piston rod checked, complete seal set replaced • Counter knife in the frame replaced • Knife gap adjusted to approx. 3 mm • Upper steel guide rails in the frame on the left and right replaced. • Worn press base cut out, base plate replaced with wear-resistant HARDOX steel. • Binding and twisting unit dismantled, broken down into individual parts, mechanics made functional, all twisting shafts and ball bearings replaced. • All wire rollers in the needle heads replaced • Wire knives cleaned and readjusted, chains greased and tensioned • All wire deflection rollers made operational • All door contact switches replaced • Wirbulator device dismantled, disassembled and made operational • General maintenance work carried out Finally, the press was subjected to a machine test in manual and automatic mode, see video for the machine function test. The documentation (BA, CE, electrical/hydraulic circuit diagram) is complete. Viewing is possible by appointment. We accept no liability for the technical specifications or any errors.

Condition: used, Year of construction: 1996, The line has been frequently modernized since its commissioning. Credpfexb Ud Rox Ab Tok Line setup according to diagram: • Head • Cylinder • Gearbox • Motors • Steel frame Control system: Modernized process control system, several operator and monitoring stations (screens, control desks) can be seen. Maintenance / condition: Frequently modernized, visually well-maintained condition. Accessories / options: Conveyor systems, cooling sections, monitoring and control units, integrated roller and handling equipment.

Condition: used, mileage: 303,815 km, power: 324 kW (440.52 HP), first registration: 02/2016, overall weight: 26,000 kg, fuel type: diesel, color: white, axle configuration: 3 axles, gearing type: automatic, emission class: euro6, loading space volume: 13 m³, loading space width: 2,500 mm, loading space length: 6,770 mm, loading space height: 770 mm, total width: 2,550 mm, total height: 3,590 mm, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), Flatbed body, aluminum side walls 2x divisible 800 mm, screen-printed floor, continuous lashing holes in the outer frame, PALFINGER medium crane type: PK 22002-EH D, 2-way outriggers hydraulically extendable and supportable, 5 step(s) hydraulically. extendable, max. lifting capacity 5700 kg, diagram: approx. 4.5m - 4450kg, 6.5m - 2850kg, 8.5m - 2050kg, 10.5m - 15870kg, 12.8m - 1260kg, 15.0m - 1080kg, tow bar ring spring, Duo-Matic brake connection, emergency brake assistant, lane assistant, stability control assistant, ABS, ASR, differential lock rear axle, engine brake, start-off aid, cruise control, automatic climate control, multifunction steering wheel, exterior mirrors heated and electrically adjustable, electric. Window lifts on driver and passenger doors, driver's comfort suspension seat, roof hatch, air horns on the cab roof, air suspension with lifting and lowering device (front and rear axles), self-steering lift axle, vehicle may be covered with advertising and/or lettering. Our offer generally does not include a new TÜV inspection. If a new TÜV inspection is required, we would be happy to provide you with an offer from our partner workshops! The vehicle may be covered with advertising and/or lettering. Our general terms and conditions of delivery and payment apply. We would be happy to provide you with a financing or leasing offer for this vehicle. Crodsv Rukgopfx Ab Tok Please contact us!

Year of construction: 2019, condition: used, functionality: fully functional, machine/vehicle number: 077-Z2A-2147, This is a manual packaging machine E 15 Basic from the premium manufacturer Webomatic, built in 2019. These small vacuum table-top machines offer high packaging performance. If you need to pack large products at high capacity but have limited space for a vacuum packaging machine, the compact yet powerful E 15 Basic or C 15-HL packaging machines are the perfect choice! Crjdpsx Drl Defx Ab Tek You will receive an invoice with VAT shown separately. Our used equipment service for you: • 6-month warranty on all electrical parts • High-quality brand-name equipment at fair prices • Professional refurbishment, inspection & expert cleaning • Tested and fully functional – or your money back • Flexible shipping or collection options • Competent advice – before and after purchase • Provision of operating manuals, connection diagrams & spare parts • Safety check according to DGUV V3 Technical data: MAP (E 15 Basic) Soft-Air (E 15 Basic) Undercarriage Angled insert GreenVAC Machine dimensions: 490 x 610 x 470 mm (W x D x H) Chamber dimensions: 430 x 500 x 180 mm (W x D x H) Weight: net/gross approx. 83 kg / 91 kg Pump: 21 m3/h high-performance pump, built-in Cycle performance: 2-3 cycles/min., depending on product size and desired vacuum Chamber made of high-quality stainless steel Easy operation MAP (C15, optional for E 15 Basic) Soft-Air (C15, optional for E 15 Basic) Serial number: 077-Z2A-2147 Year of manufacture: 2019 Additional information: The vacuum packer for any application. The E 15 Basic and C 15 HL packaging machines are perfectly suited for vacuum packing and packaging in kitchens, at weekly markets, branch operations, or for meat packaging in hunting and game processing. They are also ideal for packaging sterile and sensitive medical products or items from the electronics sector, as well as for packaging banknotes. As the C 15 HL version, the table-top machine is equipped with the sensor-controlled WEBOMATIC C 3000 S computer and comes standard with Soft-Air and MAP gas flushing for gentle gassing and vacuum packaging of delicate products. These functions are also optionally available for the E 15 Basic table-top machine. Food-safe PE chamber inserts for reducing chamber volume are included with the vacuum packer. Shipping: Delivery or collection by arrangement Worldwide shipping available on request Shipping to islands or mountain stations only by arrangement

Condition: good (used), Year of construction: 1962, Centre lathe manufacturer VDF HEIDENREICH&HARBECK type: 24 RO, year of manufacture 1962, overhauled in 1992. Equipped with 3-axis digital readout Heidenhain, 250 mm Forkardt chuck, Multifix B toolholder. Centre height: 255 mm Swing over bed: 510 mm Swing over cross slide: 270 mm Distance between centres: 1000 mm Crodpfxjxziuwe Ab Tsk Spindle bore: 55 mm Spindle speeds: 20 - 900 rpm, Motor power: 6.5 kW The machine is in good condition, electrical diagrams available. Required floor space: Length 3 m, Depth 1.2 m, Height 1.3 m, Weight approx. 1800 kg.

Condition: ready for operation (used), Year of construction: 2010, travel distance X-axis: 730 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 510 mm, rapid traverse X-axis: 50 m/min, rapid traverse Y-axis: 50 m/min, rapid traverse Z-axis: 40 m/min, total height: 3,264 mm, total length: 2,691 mm, total width: 3,965 mm, table width: 500 mm, table length: 500 mm, table load: 300 kg, rotary table diameter: 500 mm, rotational speed (max.): 1,200 rpm, overall weight: 15,000 kg, spindle speed (max.): 12,000 rpm, operating hours of spindle: 35,000 h, spindle nose: HSK A 63, number of spindles: 1, number of slots in tool magazine: 180, tool length: 300 mm, tool diameter: 125 mm, tool weight: 80 g, input voltage: 400 V, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, The Mori Seiki NMV5000 DCG is a true powerhouse, and we have taken it directly from production, fully operational, from our client (see video). Additional specifications: Max. workpiece weight on table: 300kg Table height (from floor): 870mm Max. workpiece height: 450mm Table rotation speed (in turning mode): 0 - 1200 min-1 Table rotation speed (standard): 0 - 120 min-1 Max. tool diameter: 125 mm Max. tool length: 300 mm Max. tool weight: 8 kg Codpfxjxgd Hxe Ab Tsrk Coolant tank capacity: 750L Machine dimensions: 2691x3965x3264 mm (LxWxH) Weight: approx. 15,000 kg total Includes: Original Mori Seiki tool block. KNOLL FKA/500 belt filter system + 3 filter rolls. Filtermist FX5000 emulsion mist extractor. Renishaw OMP60 3D probe. Chip conveyor. Spindle cooler. Original documentation + electrical diagrams. Photos were taken during disassembly at every stage and will be provided after purchase to assist with installation on site.

Condition: reconditioned (used), Cutter Grinder Make: harich (Deckel) Model: SSM (S0E) Refurbished with CE certification with warranty Accessories: - Machine stand - Integrated dust extraction - Grinding wheel with flange - Dressing tool - Operating manual incl. new machine electrics Crsdpex A U Rgjfx Ab Tjk according to current safety regulations incl. new circuit diagram incl. CE documentation incl. CE labelling incl. CE Declaration of Conformity

Condition: excellent (used), Mahr Mahr MarSurf CD 120 / CT120 Complete System For sale is a professional contour and surface measuring system from Mahr, consisting of several devices, accessories, calibration standards, and extensive training documentation. This is a high-quality laboratory or quality measurement system for precise analysis of surface geometry, contours, and measurement parameters. Main unit: Mahr MarSurf CD 120 (Contour Measuring System) Cedpfex A Ur Rox Ab Tork CNC contour measuring instrument with vertical axis system Precision measuring module with stylus holder Granite measuring plate with guides Suitable for contour measurements on technical components Typical measuring ranges: Vertical (Z-axis): approx. 60–120 mm (model-dependent) Horizontal (X-axis): approx. 100–120 mm Extremely high accuracy due to granite base and backlash-free guides Control units: Mahr MidRange / MidRange CNC (Type MCP-22 / MCP-23) Control and operating unit for the axes Interface for measurement software (MarWin / MarSurf XC) Mahr ST 500 External control or sensor module (often for special probes) Software and Documentation Status MarSurf XC2 V. 3.01–03.4 MarSurf XC20 V. 5.00–10.1 MarWin v13.20-07 Operation manuals, training folders, training documents Measuring examples, diagrams, technical instructions This software is designed for evaluating contours, profiles, and surface parameters. Accessories / Measuring and Calibration Parts Stylus and probe arm sets Precision styluses of various shapes and lengths Replacement needles and mounting tools Stylus holder with protective case Calibration and reference pieces Mahr Contour 2 Block with reference sphere Calibration and parameter data For PCV, CD 120, LD 120 CDs and data carriers with parameters and software Transport and protective cases Several original cases with foam inserts Calibration seal/inspection sticker visible (valid until 2026) Typical voltage data for the Mahr MarSurf / MidRange / CT series MarSurf CD 120 (Contour measuring unit / axis drive) Supplied via control unit Internal usually: 24 V DC External power supply via MidRange control unit Mahr MidRange control unit (MCP-21 / MCP-22 / MCP-23) This device is the central power supply unit. Typical values: Primary: 230 V AC / 50-60 Hz Secondary: 24 V DC (regulated) Power consumption: approx. 40–80 W Mahr ST 500 Also connected to the MidRange system Powered by 24 V DC CT120 / Probe systems Sensors operate at low voltage 5–24 V DC Supplied by the main unit (no separate power supply) Accessories, manual control units, interface boxes Usually 5 V or 24 V DC, depending on module Weight: approx. 65–73 kg Important note: "The table shown in the photos is not included in the sale." Condition: used Scope of delivery: (see photo) (Subject to change and errors in the technical data and specifications!) Further questions can be answered by phone.

Condition: used, mileage: 150,000 km, Year of construction: 2021, Serial number: ZN3D070D70904xxxx Please contact ATS Norway for more information Please provide reference number upon request: 21965 Specifications: - Eu-approved until 06.05.2026 - Km: Approx. 150,000 (may increase) - Transmission: Automatic - 4x4 - Engine brake - Length plan: 4.26 m - Trailer hitch - Palfinger PK7.501 SLD C crane - Remote control Crjdpfxex A R Nrj Ab Tjk - Crane diagram - Crane reach: 11 meters hydraulic - Approved until 07.26 - Tool cabinet - Euro 6, 180 hp - Good tires - Radio/CD - Air conditioning/AC - Service agreement with Iveco - Delivery by agreement Description: Iveco Crane truck with four-wheel drive. The truck is equipped with a 7.5 t/m Palfinger crane. Both truck and crane are approved. delivery by agreement. Km: 150000 HK: 180 Technical approved: Yes EU-approved until: 06.05.2026 Own weight: 5130 Total Weight: 7000 Payload: 1795 Width: 230 Length: 750 Euro: 6 Gearbox: Automatic

Condition: good (used), functionality: fully functional, These are two underframes with foot switch for Filllpak TT machines. With this base frame, Fillpak TT paper padding machines can be conveniently operated with the foot. The underframes are fully functional. The price quoted is gross and includes 19% VAT. OUR USED EQUIPMENT SERVICE FOR YOU: High-quality branded appliances at fair prices Professional overhaul / inspection & expert cleaning Tested & fully functional - or money back Flexible choice of shipping or collection Competent advice - before and after the purchase Csdpfx Abjui N Exo Terk Provision of operating instructions, connection diagrams & spare parts Inspection in accordance with DGUV V3 Condition: Used, tested and fully functional TECHNICAL DATA: Dimensions: W 108 x H 188-213 x L 108 cm Variable height adjustment of the FillPak TT® system Power supply: 100-230 Volt Foot drive: hands remain free to work VERSAND / SHIPPING: Delivery or collection by arrangement Weltweiter Versand auf Anfrage / Worldwide shipping on request Shipping to islands or mountain stations by arrangement only Do you have any questions, would you like advice or would you like to see something on site? You can reach us by phone during our opening hours: Monday-Friday 09:00 - 13:00 and 14:00 - 17:00. Sales are subject exclusively to our general terms and conditions (AGB)

Condition: used, Year of construction: 2004, Manufacturer: PRB Packaging Model: Destratus Year: 2004 Csdjx Au Dmspfx Ab Tjrk   Automated system for removing packs of bottles or cartons from a pallet. The equipment continuously feeds empty bottles to the rest of the line. Light curtain. UniOP control panel. History, documentation, and electrical diagrams available.

Year of construction: 2018, condition: refurbished (used), functionality: fully functional, machine/vehicle number: DT1UE18105029734, This Rational Ultra Vent hood for Rational combi steamers, including a connection kit, fits the CMP and SCC 61/101 electric combi steamers from 2011 to present (index H+I). The hood has been tested in our in-house workshop and is fully functional. The recommended retail price for this Ultra Vent hood is €3,696 net. The stated price is net, plus 19% VAT. Service: We are happy to connect you with a certified Rational customer service representative throughout Germany. Are you looking for a specific Rational appliance type? Ask us; we have access to an extensive range of used and new products. We are happy to advise you on all appliance types, whether SCC, CM, CMP, VCC, iVario, iCombi Classic, or Pro. Our used appliance service for you: • 6-month warranty on all electrical parts • Professional overhaul/inspection & expert cleaning • Tested & fully functional - or your money back • Flexible shipping or pickup • Expert advice - before and after purchase • Provision of operating instructions, wiring diagrams, and spare parts • Tested according to DGUV V3 This Ultra Vent hood features patented condensation technology, which captures and traps vapors and fumes. Complex installation measures for exhaust ventilation are a thing of the past. An external connection is completely eliminated. Installation is simple and can even be retrofitted. Technical specifications: • W x D x H: approx. 854 x 1226 x 470 mm • Power supply: 230 V / Hz: 50-60 • Weight: approx. 55 kg • Serial number: DT1UE18105029734 • Year of manufacture: 2018 Condition: used, fully functional Shipping: Crodpfxjwd Ixco Ab Tsk • Delivery or pickup upon request • Worldwide shipping upon request • Shipping to islands or mountain stations only upon request Do you have questions, require advice, or would you like to view something in person? You can reach us by phone during our opening hours: Monday-Friday 9:00 a.m. - 1:00 p.m. and 2:00 p.m. - 5:00 p.m.

Condition: used, Year of construction: 2009, Case packer from 1993 refurbished by the manufacturer in 2009. Automatic packing of boxes with cardboard group by rows and by stacking in a cardboard box with closure. Max. production: 20 to 30 cycles / minute Nordson Problue4 glue generator Label removal Delna DS 14 History, documentation and electrical diagrams available. Spare parts available. Product length 50 - 130 mm Crsdpfox Au Avjx Ab Tjk Product width 47 - 200 mm Product height 15 - 40 mm Carton length 70-250 mm Carton width 70-250 mm Carton height 40-120 mm