Used Abrasive Polishing Machine for sale (65,053)

Condition: ready for operation (used), - double grinding and plishing machine - 1,5 kW - speed 1420 U/min - working hight is 600 mm - conical shaft Lrsdpfsdz Uzbjx Ad Nsg

Condition: new, Year of construction: 2021, Table polishing machine / flat polishing machine for parts up to 3000mm length. With one or two polishing units. Basic machine and control cabinet new, polishing units used but completely overhauled with new polishing motor. Lsdpfx Adjg D Rfmj Nerg

Condition: ready for operation (used), empty load weight: 1,350 kg, total length: 1,960 mm, total width: 1,170 mm, total height: 1,070 mm, additional equipment features: CNC full automatic, Volledig automatische cirkelzaag Automatische CNC-positionering van het zaagblad = automatische draaitafel, tot 180° links en rechts Uitgerust met: 1 - werkstukopslagunit (groen) + automatische rollenbaan, lengte 7 meter 2 - automatische invoer door het werkstuk naar het zaagblad te trekken, max. enkele beweging van 2000 mm - herpositionering is mogelijk voor langere lengtes 3 - automatische uitvoer van het gesneden werkstuk, maximale beweging van 1000 mm 4 - lostafel met kettingen Automatische nulpuntherkenning Automatische geprogrammeerde gecontroleerde verwerking van snijsequenties Opslaan van programma#39;s met verschillende zaagtaken Dia saw / abrasive - disk: max 425 mm Turningspeeds: 6 > 30m/min Lsdpfx Adjxpki Es Njrg Power needed / motorpower: 5,5 kW

Condition: good (used), Year of construction: 2001, The system can also grind miters. Connection value: 20.5kW Total length: 12500mm Lrodpfx Aoiqghzjd Nsg

Condition: good (used), Year of construction: 2020, functionality: fully functional, Info: polishing machine Lrodpfjx Dtpwex Ad Neg

Year of construction: 2025, operating hours: 5 h, condition: refurbished (used), functionality: fully functional, machine/vehicle number: I 91-61, USED AND REFURBISHED MACHINE (AS NEW): Lrjdpfx Adex Da Dho Njg • Usable working length: 2100 mm • 40 mm front stop for overlapping processing • Maximum block thickness: 140 mm • Working capacity at 90°: 2100 x 140 mm • Electrospindle power: 1.2 kW • PLC electronic sequential control • 3.5” touchscreen controls • Rapid belt drive with Brushless motor • Epicyclic reducer Complete with: • 8 pressure shoes • 2 front supports • 1 side square • 1 service wrench Supplied with a set of new polishing tools (with three synthetic diamond tips)

Condition: good (used), Double polishing stand Left side diameter 300 mm Right side diameter 250 mm Speed 1400 rpm Drive power 1.5 kW Lrjdpfx Adownrb Nj Neg Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 D - 44143 Dortmund - Wambel

Condition: good (used), Year of construction: 2007, working width: 800 mm, Polishing machine Manufacturer: Gottschild Model: HBS Year of manufacture: 2007 Ljdpfxsxzqrqs Ad Njrg High-gloss polishing machine, previously used for polishing kitchen fronts and bathroom furniture parts Working width: 800 mm 1 polishing head, moves automatically right – left Polishing motor: 0.7 / 0.9 kW Working area is detected by sensors Conveyor belt width 820 x length 1950 mm Conveyor belt moves forward and backward One roller conveyor each in front of and behind the transport system, B 820 mm x L 1500 mm Connected load 2.2 kW / 400 V / 50 Hz Compressed air connection 6 bar

Condition: new, Year of construction: 2025, functionality: fully functional, machine/vehicle number: MZBF03, overall weight: 650 kg, total width: 1,500 mm, total height: 1,500 mm, total length: 1,800 mm, tank capacity: 30 l, compressed air connection: 0.4 bar, transport height: 1,600 mm, transport length: 2,000 mm, transport width: 1,600 mm, Equipment: CE marking, This machine is mainly available to fill nail glue into various round and flat glass and plastic bottleswith the filing range from 5-20ml. High precision cam provides a regular plate to position, inner,brush and cap; accelerating cam makes capping heads going up and down; constant turning armscrews caps, peristaltic pump and pressure tank filling time measures filling volume; and touchscreen controls all action. No bottle no filling and no capping. lf there is no plug in the bottle, itmust not cap until having been detected plug in the bottle. The machine with advantage of highposition. Lrodpfxsxunhvj Ad Nsg

Condition: excellent (used), Year of construction: 2016, working width: 400 mm, Compact oil spreader / polishing machine Manufacturer: Sarmax Year of manufacture: 2016 Ledpfoxyvq Nox Ad Nerg Spreader and polishing machine for applying oil or stain to solid wood floorboards, parquet, etc. Working width approx. 400 mm 1x polishing pad unit, infinitely variable speed control 1x brush unit, infinitely variable speed control Height adjustment per unit, manual via handwheel Feed speed infinitely adjustable Connection: 380 V Dimensions: 1600 x 1100 x 1700 mm Weight approx. 400 kg

Condition: used, TECHNICAL DETAILS - Rotary table : Ø 800 [mm] Lrsdpfxow Ihrvs Ad Nog - 12 Spindles with automatic mechanical clamping and unclamping - 4 Work units - 1 Siemens programmable logic controller

Condition: used, Year of construction: 1976, We are selling a used rotary indexing table with four polishing stations. This rotary table is also equipped with four rotary unions. The polishing stations are designed for polishing wheels with a maximum diameter of 500 mm. The stations feature automatic feed. The drive power of the polishing stations is 5.5 kW. If you have any further questions, please feel free to contact us! Lrsdpfx Adoxxv D Hs Njg

Year of construction: 2016, condition: ready for operation (used), A centerless round polishing machine Loeser is available. Workpiece diameter range: 10mm-30mm, workpiece length range: 100mm-1000mm, stations: 2, working direction: left-right, magazine system with infeed and outfeed table: 1000mm/1000mm. Including magazines as well as infeed and outfeed table. Documentation available. An on-site inspection is possible. Lrsdpfsvzbg Aox Ad Njg

Condition: new, functionality: fully functional, Spare parts for machines manufactured in Poland. FUM Poreba FAT Wrocław AVIA Warszawa Jafo Jarocin ZM Tarnow Tarnow DEFUM Dabrowa Gornicza FAMOT Pleszew Ljdpfx Adeum Ixxj Nsrg Spare parts for Polish lathes, including: TUM 25, TUM 35, TUJ 50, TUJ 63, TUJ 560, TUJ630, TUR 50, TUR 63, TUR 560, TUR 630, TPK 90, TRP 93, TRP 110, TR 115, TR 135. Spare parts for Polish milling machines, including: FND 25, FND 32, FND 40, C20, D36, D40, FF series, FR series.

Year of construction: 2008, condition: used, “Alan Richardson” automatic pipe polishing machines can also be used for grinding, removing dirt, oxidation, rusting. The machine is in good used condition, fully working. Can be tested. Specification: Model: Alan Richardson Made in: England Year: 2008 Pipe length up to: 1700 mm Documentation: included Place: Marijampole, Lithuania Lrjdpfxsph T N Ss Ad Nog If you have more questions, we will be happy to answer them.

Year of construction: 2007, operating hours: 12,569 h, condition: used, functionality: fully functional, For sale: Omax 55100 waterjet. Processing sheet format 2.5 x 1.25 m. Movable vertical Z-axis • 1 owner from new • Head with diamond orifice • Air cushion (submerged cutting option to minimize jet noise) • OMAX Premium software (multi-station design) Machine is fully functional after inspection, serviced according to the maintenance schedule. Additionally: - Abrasive removal system for Big Bag 1000kg, complete with suction pipes and hand lance Ledpfxoxvfb Ne Ad Njrg - Automatic abrasive feeder Big Bag-1000kg Note: We can install the machine and provide comprehensive training (technologist and operator)

Condition: excellent (used), IMM 72780 Double-sided polishing machine Mint condition, the machine has hardly been used. TECHNICAL DATA Polishing wheel: 100 - 500 mm shafts: 35 mm Spindle speed: 1500 rpm Ledpfxeu Hanyj Ad Norg Voltage: 400 V, 50 Hz Weight of basic machine: Approx. 400 kg No responsibility is taken for the correctness, completeness and up-to-dateness of the information.

Condition: used, Polish Lathe / Polishing Machine Between points: 1500 mm Centre height: 180 mm Maxi diameter to polish: Ø 380 mm Spindle CM3 Lodpfxoxuf Hvj Ad Nsrg Spindle speed driven by speed variator Pneumatic tailstock Equipped with a vaccum system (only air hose to plug in) Machine was used to polish axes Voltage: 220 V mono Dimensions (L x W x H): 3200 x 1000 x 1900 mm Weight: 1,2 T

Condition: reconditioned (used), Round table polishing machine make Bula, model MP81 for sale. Continuously turning machine for polishing, brushing, grinding and deburring a wide variety of workpieces. 6 workpiece holders mounted in a pitch circle of 250 mm. 1 processing station, drive power 2.2 kW, with Bula Quick Lock system of the polishing wheels. Polishing shaft diameter 25 mm The machine has been completely overhauled, machine body sandblasted, primed, repainted, new bearings, new motors, new gearbox, new V-belts, new handwheels, new pulleys, completely new control cabinet, and all drives are controlled by frequency converters. Subject to prior sale. Optionally, the system could also be supplied with a polishing paste system - liquid, consisting of 1 high-pressure dosing pistol WIDOBERG HDP-2, brackets, timer, etc. and pressure container. Lsdjlccvmepfx Ad Nsrg

Condition: good (used), Code: 0118 Brand: DE STEFANI Model: MV Automatic polishing machine for edges for polishing polyester, polyurethane and other paints Features: Track drive system with rubberized skids Manual upper presser with rubberized wheels Adjustable support bar for wide pieces Composition: Lrsdpfx Aewiv Dkjd Nsg 1° Group - N° 2 adjustable brushes - Motor Hp 4 2° Group - N° 1 Brush - Motor Hp 2 Working surface height mm 870 Feed speed 5 to 25 mt/min Working length min mm 150 Working height min/max mm 10/100 Working width min 50 Protection cabin Electrical cabinet Overall dimensions mm 2700 x 1000 x 1250 h Weight kg 1500

Condition: good (used), Year of construction: 2008, functionality: fully functional, type of input current: three-phase, input voltage: 400 V, Equipment: documentation/manual, double-sided, rotational speed infinitely variable, type plate available, 2008 ACME Robotic Polishing Cell with Fanuc M-710i Robot – Fully Automated Metal Finishing Solution Looking for a high-performance robotic metal polishing system? Don’t miss this 2008 ACME Manufacturing Co. Robotic Polishing Cell, engineered for precision, consistency, and automation. Ideal for metal finishing, surface treatment, automotive, aerospace, or industrial manufacturing. 🔧 Manufacturer: ACME Manufacturing Co. 🚨 Machine Type: Robotic Polishing Cell 📅 Year of Manufacture: 2008 🤖 Robot Model: Fanuc M-710i 📍 Location: Ireland 📦 Condition: Good – fully operational and maintained 🟢 Availability: Immediate ✅ Machine Overview: This 2008 ACME robotic metal polishing cell is a fully automated surface finishing system equipped with a Fanuc M-710i 6-axis robot and designed for precision metal polishing in high-volume environments. Ideal for manufacturers in medical device, automotive, aerospace, general engineering, or stainless steel finishing sectors. 💡 System Includes: ✅ Fanuc M-710i Industrial Robot – Reliable 6-axis automation for complex polishing paths ✅ Two Twin-Head Polishing Stations – Simultaneous dual-surface processing Lodpfxjxtftye Ad Nerg ✅ Automatic Polishing Paste Delivery Units – Supports both fine and coarse pastes for optimal finish ✅ Vibration Monitoring Point – Ensures consistent surface quality and machine health 📈 Benefits: Increased throughput and reduced labor costs Repeatable, uniform polishing quality Fully automated and programmable – minimal operator input Compact, integrated cell for efficient floor space use Core Functionality Material Removal: The robotic system employs abrasive belts or wheels to remove material from workpieces, effectively smoothing edges, removing imperfections like flash, and achieving specific surface finishes. Precision and Repeatability: Unlike manual polishing, which can vary from part to part, robotic systems ensure consistent and repeatable results, crucial for high-precision applications. Versatility: ACME cells can be adapted for a wide range of materials and part geometries, including orthopedic implants, automotive components, and more. Integrated Automation: These cells often feature part handling systems, like conveyors and dual-drawer arrangements, to enable continuous and unattended operation. Dust and Sound Containment: Built-in enclosures help confine dust and noise generated during the process, improving safety and environmental conditions. Key Features and Benefits Increased Production Rates: Robotic polishing can significantly increase the number of parts processed per hour compared to manual methods. Reduced Costs: By automating the process, companies can reduce abrasive media costs, labor costs, and potentially decrease scrap rates. Improved Safety: Robotic systems eliminate the need for operators to manually handle potentially hazardous materials and tools. Enhanced Consistency: Robots deliver consistent, repeatable results, ensuring uniform quality across all parts. Process Optimization: ACME cells allow for programmable belt speeds and other parameters, enabling optimization for different materials and finishes.

Condition: used, Year of construction: 2010, machine/vehicle number: RPM 1000 ZO, Used robots - Polishing machines P 1000 ZO Lodpjxludljfx Ad Norg right-hand design Polishing discs Ø 1000 mm With feed and oscillation

Year of construction: 2018, condition: ready for operation (used), Glass thickness: 3-19mm, glass dimensions: 140-2000mm, speed: 0.1-10m/min, installed power: 61kVA (49kW, 86.4A, 400V), max. glass weight: 6170kg, working height: 920mm, max. opening speed: 30m/min, with transfer module Bottero TRANSFER 500P, weight: 1t. An on-site inspection is possible. Lodoxg Rhpspfx Ad Nsrg

Condition: used, abrasive belt measures: 50 x 100 Ø mm engine: 380 V, 0,7 kW space needed: 650 x 550 x 1050 mm Lrjdpfxob Tcv Hs Ad Nsg

Condition: good (used), EMME ELLE POLISHING LINE MODEL TYPE: L.B.A.1350 OCCASION Ljdpfx Adjhkndmo Nsrg WORKING TABLE OF 1.350 X 3.200 MM. 4 OSCILLATING ROLLERS OF 350 MM DIAMETER + 4 BUFFING PADS OF 180 MM DIAMETER. AUTOMATIC WAX SPRAYING SYSTEM BY MEANS OF HIGH PRESSURE PNEUMATIC GUNS, WORKTABLE DEPRESSOR UNIT WITH 5,5 KW MOTOR, CE REGULATION.