Used A Disk Lapping Machine for sale (84,232)

Condition: used, Year of construction: 1976, table diameter mm workpiece height mm Dedsub Aluepfx Ab Tsla number of wheels 2 total power requirement 11 kW weight of the machine ca. 4,2 t dimensions of the machine ca. m

Condition: used, Year of construction: 2015, Box Width 400 - - - - - - - - - - - - - - - - - - Grinding- and Lapping Machine | OKAMOTO - Aero YT-300 Dljdpfx Ast R U Stsb Toa The machine is in a well-maintained condition. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: Aero YT300 | Aero YT 300 | AeroYT300 | YT-300 | YT300

Condition: used, Year of construction: 2004, CNC Thread rolling and gear burnishing machine ESCOFIER P440 CN CNC Siemens Djdpfxst Ek Sfo Ab Tjla New 2004 - like new 2-roll 2 moving heads 4000 daN rolling pressure workpiece diameter: 100mm max. tool diameter: 180-245mm Swivelling: +/-6°, forward speed: 0.1-20mm/s, reverse speed: 0.1-30mm/s motor power: 8.6kW New: 2004 Condition: like new under power in our warehouse Mimu Machine Tools (Italy)

Year of construction: 1999, condition: excellent (used), machine/vehicle number: 9912804, SURFACE LAPPING MACHINE "STAEHLI" TYPE FLM-1000 Manufacturing origin Swiss Voltage 400/50/2 Netweight abt.2500 kg Dimensions 1500x2000x2180 mm Total power Custom position 8460.40 20 TECHNICAL DATA Polishing discs, ext.dia. 1000 mm 3 straightening rings, inn.dia. 400 mm Speed of polishing discs 60 min-1 Time-regulator, 6 steps 0 – 60 h Driving main motor 7,5 kW Pivoting control-desk Special equipment Polishing discs speed, continuous 0 – 60 min-1 Pneumatic, 3 cylinders, adjustable 50 – 2700 N Preprogrammation Pressure load, 3 step Air pressure 6 bar Cooling, tank cap. 150 Lt Load and unload table Change device Cycle load-change-unload device Polishing systems Dledpfx Asd A Tp Ssb Toa errors and omission excepted-data given without obligation

Condition: new, Year of construction: 2025, machine/vehicle number: SÇ 211 Alüminyum Pvc Orta Kayıt Alıştırma Makinesi ( 2 Bıçak), - Conforms to CE standards. - Possibility of lapping the middle register connections of PVC and aluminum profiles. Dlodpfx Aoq U S Ahob Tea - Up to 30 degrees at different angles, possibility of lapping the middle register connections of profiles - Pneumatic profile clamping system B7ull38nwa - Ability to move the milling motor with a pneumatic cylinder. - Easy series change thanks to the separator button (60-70) OPTION - Hydro check system - Cooling System

Condition: good (used), Joke lapping machine EL 600 - with accessories - with lapping compound pump & pressure device Good condition, fully functional, can be inspected and tested on site. Dodpfx Abjwv Ha No Tsla International shipping available. Inspection: Please note that, to avoid misunderstandings, the item can be inspected and tested under power before purchase. Kindly ask any questions prior to purchasing to prevent any ambiguities. For general inquiries or to schedule an inspection appointment, I am available at the phone number provided above or below at any time. Subject to errors in description and prior sale. VAT is itemized separately on my invoices. Shipping via freight forwarder.

Condition: used, Year of construction: 1974, table diameter mm workpiece height mm number of wheels 2 total power requirement 8 kW Dljdpfxjub Alze Ab Tea weight of the machine ca. 4,2 t dimensions of the machine ca. m

Year of construction: 2008, condition: good (used), functionality: fully functional, machine/vehicle number: WAC 715 Scalar, Used peripheral grinding machine with automation. Many diamond grinding wheels and accessories. in good condition. Machine has been operated with oil Dedpfxsr Dbm Ro Ab Tjla

Condition: as good as new (ex-display), functionality: fully functional, TECHNICAL FEATURES Working width mm 430 Vibrations per minute no. 1500 Voltage V 220 - 240 Frequency Hz 50 Dljdpfxsvnmkas Ab Tsa Brush motor power W 1000/1300 Brush contact pressure g/cm² 44.3 - 48.2 Underground height mm 270 - 285 Socket for dust collection yes Noise level db(A)

Condition: used, Year of construction: 1975, table diameter mm workpiece height mm number of wheels 2 Dsdpfx Asub Al Ijb Tsla total power requirement 11 kW weight of the machine ca. 4,2 t dimensions of the machine ca. m

Condition: used, Year of construction: 1983, table diameter 1000 mm workpiece height 25 mm Dedpjt Hw H Ssfx Ab Tsla number of wheels 1 total power requirement kW weight of the machine ca. t dimensions of the machine ca. m

Condition: used, Make: DISKUS-WERKE, Model: ModuLine DS 300 SO, Year of manufacture: 2013, Serial No.: 2219, Control unit manufacturer: Siemens, Model: Sinumerik 840D sl, 2 spindles, spindle distance: 210 mm, max. speed approx. 4000 rpm, W-axis tool spindle / grinding spindle: 2000 rpm, max. workpiece diameter: 100 mm, max. workpiece height: 40 mm, 8-position tool turret by Sauter, Model: 0.5.480.516, tool holder: Capto C5, workpiece automation device by DVS, Type: Moduline, transfer robot by Epson, PLC system control by Siemens, Simatic Panel Touch display, coolant system by Knoll, Type: KF150/950, paper band filter, chip conveyor by Knoll, Type: 225S-2/170. Dlodpfx Abjx Ahg Uo Tsa +++ Note: Machine is part of an online auction! +++

Condition: used, Year of construction: 1990, Technical details: Dsdpfxjvnmnro Ab Tjla adjustment drive of the grinding de: 0,0025 - 0,05 mm total power requirement: 100 kW adjustment of grinding head slide: 150 mm weight of the machine ca.: 17 t grinding spindle drive: 2 x 37 kW grinding width: 30-150 mm peripheral speed: 34 m/sec workpiece speeds: 60 - 300 mm/Sek. grinding height: 70 mm grinding wheel diameter: 750 mm grinding tools: 750 x 75 x 350 mm grinding wheel turning speeds: 870 U/Min. max. workpiece diameter: 250 mm

Condition: used, Year of construction: 1998, control Siemens Sinumerik grinding wheel diameter 900 mm grinding wheel width 20-80 mm In our opinion, the machine is in good condition used condition. Double face side grinders The machine was used for the production of connecting rods. Accessories, tools and clamping devices shown are only part of the scope of delivery if this is noted in the additional information. Dlodpfx Ajxuv Udob Tja Changes and errors in the technical data and information as well as Subject to prior sale!

Condition: excellent (used), Year of construction: 2012, DISKUS DDS 750 XR – Technical Specifications Machine type: vertical double-disc grinding machine Model: DDS 750 XR Grinding wheel diameter: 750 mm Maximum grinding width (through-feed): 180 mm Maximum material thickness (through-feed): 30 mm Dedpfowwrqcex Ab Tela Maximum grinding width (plunge-cut): 300 mm Maximum material thickness (plunge-cut): 80 mm Grinding spindle 1 power: 48 kW Grinding spindle 2 power: 48 kW Grinding wheel surface speed (max): 63 m/s Coolant delivery: through the spindle center Feeder type: rotary feeder Feeder speed range: 20 mm/min to 240 mm/min Control system: Siemens 840 D CNC Total machine height: approx. 3,100 mm Overall weight: approx. 13,000 kg Footprint requirements: length approx. 4,900 mm, width approx. 5,000 mm Construction features: triangular rigid frame, linear-guide spindles, 16 CNC axes, central lubrication, coolant filtration

Condition: excellent (used), Year of construction: 1972, total power requirement 22 kW weight of the machine ca. 8 t Q U O T A T I O N We are pleased to offer you ex our stock, subject to prior sale, and error in technical data : DISKUS Double Disc Surface Grinding Machine in C-form with rotary workpiece feeding system and automatic dressing cycle model DDS 600 RAM year 1972 / 2002 modernized Serial no 6967 _____ Grinding wheels Ø, each 600 mm Grinding wheels bore x height, approx. 75 / 150 mm Grinding wheel speeds Upper wheel 95 – 955 rpm (3-30 m/s) Lower wheel 765 rpm (24 m/s) Grinding spindle drive, each 30 kW Workpiece dimensions: Grinding width (or workpiece diameter) approx. 20 - 120 mm Grinding (workpiece) height max 50 mm Hydraulic infeed impulse 0.0025 – 0.05 mm Total feed way 150 mm External Ø of workpiece carrier disk 810 mm Feeds of rotary workpiece feed system, infinitely variable 25 – 241 mm/s Total electrical load, approx. 50 kW - 380 V - 50 Hz Weight, approx. 8,000 kg Accessories / Special Features: • In 2002 updated IONIC gauge control Model 17A with monitor and direct input of workpiece data including tolerance range, workpiece counting, statistics. The workpieces are continuously measured via two opposite tracer heads, automatically triggering an hydraulic infeed when needed. • Rotary workpiece feed system with Workpiece carrier wheel (Ø 800 mm) and infinitely variable speed adjustment. • Workpiece height check to avoid crashing with griding wheels • Automatic hydraulic dressing device between the two grinding wheels for simultaneous dressing of both wheels. Dressing cycle can be preset (no. of workpieces/time). Hydraulic return of upper grinding slide to original position/workpiece/thickness (saves a lot of time). • ELBARON Oilmist Extractor with stand and adjustable suction cone • Walkable steel podium for easy machine operating and monitoring • Grinding wheel exchanging device, various spare grinding wheels • Central lubrication using grease and oil mist * Separate switch cabinet. * Separate hydraulic unit. • Currently no coolant filtration device available (can may be supplied separately). This machine is ideal for double-sided simultaneous grinding of parallel workpiece surfaces by continuous method, for maximum output and accuracy in mass production (e.g. Bearing rings, Piston rings, washers, hydraulic parts, and other pressed parts.) Condition : very good ! Very well maintained ! Please click here to soon view a video of the machine running : ! Djdpfx Aexqrbxeb Tela Delivery : immediately available, FCA Metzingen Payment : 100 % Net, after conclusion of contract, before loading

Year of construction: 1972, condition: ready for operation (used), A horizontal double-sided face and surface grinding machine Diskus is available. Grinding wheel diameter: 600mm, grinding wheel width: 150mm, workpiece dimensions X/Y: 1600mm/3000mm, machine dimensions X/Y/Z: approx. 5000mm/5000mm/3000mm, weight: approx. 11000kg. Documentation available. On-site inspection is possible. Dedpjw Azu Uefx Ab Tjla

Condition: new, Year of construction: 2025, machine/vehicle number: SÇ 211 ALUMİNYUM PVC ÇOKLU ORTA KAYIT ALIŞTIRMA MAKİNESİ, - Notching (milling) process with adjustable linear motor movement - 5 adjustable resting systems for different profiles Djdpjq U S Diefx Ab Tola - Quick blade change feature that makes work easier - Notching of center register profiles between 1/6 pieces - Profiles are fixed in the machine with pneumatic vertical and horizontal clamps - Independent operation of vertical and horizontal clamps - Spare knife storage cabinet on the front of the machine - Notching (milling) of 2.5 meter long profiles by means of support arm - Maximum profile notch height ( h ) 140 mm OPTION - Spray cooling system - 220 volt operation

Year of construction: 1964, condition: good (used), Diskus Werke DSH 600/1000 Side Face Grinding Machine  This machine type is a machine with a motor-driven grinding spindle. Clamping and grinding of the workpieces is done with clamping devices adapted to the respective work. The devices are attached to the machine bed. The column saddle, on which the motor spindle is mounted, serves as a feed, dressing and pendulum slide. Manufacturer: Diskus Werke Model: DSH 600/1000 Serial number: 6299 Type: Side surface grinding machine Cooling lubricant: Isocool 1020 BF Coolant volume: 400 litres Concentration: 2.5% (x factor 1.6 ≙ 4%) Year of manufacture: 1964 Condition: used  Complete factory closure, large selection of storage platforms, pallet racks, shelf racks, paternosters. High-quality industrial machines, lathes, grinding machines, hand machines. Further articles - new and used - you will find in our shop! International shipping costs on request! Dedpfx Aohtyudsb Tela

Year of construction: 2007, condition: used, control Siemens 840D grinding wheel diameter 900 mm Workpiece - grinding width 144 - 152 mm Workpiece - grinding dimension 22 - 25 mm turning speeds 24 m/s: 1.425 U/min peripheral speed max. 25 m/sec capacity 37 kW total power requirement 75 kW Dlsdpsxq Hkusfx Ab Toa weight ca. 18,0 t dimensions of the machine ca. L 4,9 x B 4,9 x H 2,6 m In our opinion, the machine is in good condition used condition. Double face side grinders The machine was used for the production of connecting rods. Accessories, tools and clamping devices shown are only part of the scope of delivery if this is noted in the additional information. Changes and errors in the technical data and information as well as Subject to prior sale!

Year of construction: 1992, condition: used, grinding height 50 mm grinding width 120 mm grinding wheel diameter 600 mm total power requirement 85 kW weight of the machine ca. 9500 kg D I S K U S (Germany) CNC Controlled Double Sided Vertical Spindle Surface Grinder with Rotary Workpiece Feed System and IONIC Size Control Model DDS 600 III PLM - CNC Year 1992 erial No. 7924 _____ Grinding wheel Ø x bore x height, each 600 x 150 x 75 mm Approximate Workpiece dimensions: Grinding height, approx. 1.5 – 50 mm Grinding width, appox. 20 - 120 mm Vertical quill adjustment, each, approx. 150 mm Infeed of grinding wheels via CNC 0.0001 mm Feed of workpiece transportation device, infinitely variable 40 – 235 mm/sec Grinding wheel speed, each (30 m/s) 191 - 955 rpm Grinding spindle drive, each infinitely variable 37 kW Total electrical load, approx. 85 kW - 380 V - 50 Hz Weight, approx. 9,500 kg Accessories / Special Features * SIEMENS CNC Control, Model SINUMERIK 810 G, with monitor, for 4 axes i.e. * Movement of 2 spindle quills, dressing device, WP Rotation. Direct programming of Grinding Process data on keyboard. In connection with a IONIC Size Control No. 17 A / 68.000 with two tracers for measuring the thickness of the workpieces after grinding process, and corresponding infeed of the grinding wheels. Continuous display of measuring results on the monitor, with statistics, workpiece counter, etc. Digital Display Ampere for both grinding wheel drives and for grinding spindle speeds, etc. . * Positioning control device for supervising the height of the lower grinding wheel.. * Double column design as a portal for extra stability and higher accuracy * Rotary workpiece transportation device with infinitely variable feeds. The workpieces are Manually stacked in a device and forwarded by a transportation carrier disk thru the grinding wheels, there are two WP- down holders, one equipped with a overheight stop-control. * Angled grinding wheel dressing device, with automatic dressing process, Djdpfxot Hw Naj Ab Tola integrated in the control as CNC axis, with safety switch-off. * Separate large switch cabinet. * Automatic central lubrication. Large pneumatic control system * Large Coolant device 6 (F) with filtering unit and magnetic separator. * Various Grinding wheels, WP transport carrier disks, 2 flanges, large Olimist separator, etc. This machine is very suitable for simultaneous double-sided grinding of large series of workpieces, e.g. punched parts, piston rings, hydraulic parts, rotors, distance rings, etc. Condition : Very good. Machine can be soon inspected under power. Delivery : Ex stock, as inspected. Payment : Net, after conclusion of contract.

Condition: used, Year of construction: 1969, grinding height 60 mm grinding width 120 mm grinding wheel diameter 600 mm grinding length mm workpiece height 60 mm total power requirement 50 kW Djdpfx Abet Hw N Ho Tela weight of the machine ca. 7000 kg dimensions of the machine ca. m D I S K U S (Germany) Double Side Vertical Spindle Surface Grinder, C-Frame Design, with Rotary Workpiece Feeding System and Automatic Dressing Device Model DDS 600 CR-A Year 1969 Serial-No. 6672 _____ Grinding wheels Ø x bore, each 600 mm Grinding wheels height x width, approx. 60 mm Workpiece dimensions: Grinding height x grinding width, approx. 60 x 120 mm Vertical adjustment of each grinding head 150 mm External Ø of workpiece carrier disk, approx. 810 mm Feeds of rotary workpiece feed system 14 – 145 mm/sec Grinding wheel speeds, each, infinitely variable 765 rpm (24 m/s) Grinding spindle drive, each 22 kW Total electrical load, approx. 50 kW - 380 V - 50 Hz Total weight, approx. 7,000 kg Accessories / Special Features: * Rotary workpiece feed system with infinitely variable speed adjustment prepared with workpiece carrier disk approx. dia. 800 mm with relevant workpiece shaped pockets and after the grinding the parts will be automatically sorted out and collected in a collector box. * IONIC – Size Control Unit Model Nr. 9 So with measuring probe for the ground workpieces and with signal for the hydraulic infeed of the grinding wheel when size is not in order. * Automatic Dressing Device for the grinding wheels, hydraulically operated and with the automatic return of the grinding wheels after dressing cycle to the previously adjusted position and to continue the working cycle. Dressing cycle can be presetted by a timer or a manual release. * Manually operated infeed device of the Spindle slide to optimal workpiece thickness. * Spindle drives controlled by Ampere-Meters. * Separate switch cabinet. * Separate hydraulic unit. * Various carrier disks, etc. * Safety covers. * Central lubrication. * Large Coolant device with paperbandfilter This machine is ideal for double-sided simultaneous grinding of parallel workpiece surfaces by continuous method, for maximum output and accuracy in mass production (e.g. Piston rings, washers, hydraulic parts, and other punched parts.) Condition : Good . Machine can be inspected under power. Delivery : Ex stock, as inspected. Payment : Net, after conclusion of contract.

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, input voltage: 400 V, Used machine - very good condition - checked and fully functional. NEW VERSION - AL7 Year of construction: 2016 Cutting technology and compactness Universal bread cutter: cutting all types of bread (even fresh from the oven) without oiling the knife Soft sound: noise-optimized cutting Long service life of the circular knife due to special grinding Hygiene and handling Automatic start at the push of a button after closing the safety cover Automatic slice holder that supports the slices during the cutting process and thus facilitates the removal of bread Direct access to the knife area for cleaning and knife replacement security Reliable safety system with automatic gripping of the bread and automatic residual piece ejection Thanks to the absolutely secure locking of the lid, there is no risk of injury to the customer in the self-service area: there is no access to the knife or the gripper hook when the safety lid is open GS mark (mark of the trade association for tested safety / certificate of compliance with the requirements of the Equipment and Product Safety Act) Dledpfx Ajx A U U Eob Tsa Freight costs depend on the weight, volume and above all on the distance, the following information is relevant for inquiries: Delivery address (postcode and name of the town), but further details require a telephone call, so we ask you to inquire about transport costs and other delivery modalities to contact us by phone. Our contact details can be found under the legal information of the seller. Payment in cash, possible upon delivery on site. We sell and export worldwide, due to our very large storage capacity we can also deliver larger quantities flexibly and quickly. Please contact us before purchasing. We issue intra-community invoices - excluding VAT. opening hours Mon-Fri: 8 a.m.-4 p.m. sat .: closed

Condition: used, functionality: fully functional, Year of construction: 2019, TRUMPF TruDisk 4006 (6 C) – High-Performance Solid-State Laser with KLH Cooling Unit RW 20/0 SK Description: The TRUMPF TruDisk 4006 (6 C) is an industrial high-power solid-state laser delivering 4 kW laser output, engineered for precise applications such as laser welding, cutting, and cladding. The system is distinguished by its high energy efficiency, stability, and outstanding beam quality. Combined with the KLH Kältetechnik RW 20/0 SK cooling unit, it is ideally suited for use in automated production lines, robotic cells, or CNC manufacturing systems. Technical Specifications Laser (TRUMPF TruDisk 4006 (6 C)) Manufacturer: TRUMPF Laser GmbH, D-78713 Schramberg Model: TruDisk 4006 (6 C) Equipment No.: L4216M0390 Serial No.: 20-10-03-A604 Year of manufacture: October 2019 Rated voltage: 380 V (–10 %) … 460 V (+10 %), 3 AC + PE Power consumption: 22 kW / 23 kVA Nominal current: 32.5 A / 400 V Frequency: 50 – 60 Hz Protection class: IP 54 Weight: 820 kg Short-circuit capacity (SCCR): 50 kA CE marking: Present Technical Specifications Cooling Unit (KLH RW 20/0 SK) Manufacturer: KLH Kältetechnik GmbH, D-18209 Bad Doberan Model: RW 20/0 SK Model No.: 0393710 Serial No.: 17KLH00670 Year of manufacture: 2017 Refrigerating capacity: 10.2 / 12.9 – 20.4 / 21.5 kW Voltage: 400 / 460 V Frequency: 50 / 60 Hz Refrigerant: R134a (3.7 kg), hermetically sealed system Max. operating pressure: 20.5 bar Dlodpfx Ajxwc Trob Tja CE marking: Present Automation Level: Designed for fully automated manufacturing systems. The laser is engineered for integration into robotic systems, CNC machines, or custom production cells and supports standard interface protocols (Ethernet, fieldbus, analog signals) for industrial automation.

Condition: used, functionality: fully functional, Year of construction: 2017, machine/vehicle number: 20-10-03-A105, TRUMPF TruDisk 5001 (6 C) – High-Power Solid-State Laser Description: The TRUMPF TruDisk 5001 (6 C) is an industrial high-power solid-state laser engineered in Germany, designed for demanding applications such as laser welding, laser cutting, cladding, and surface processing. The TruDisk series is renowned for its outstanding beam quality, long-term stable performance, and reliability in continuous 24/7 operation. This laser is ideally suited for integration into automated production cells, robotic systems, or CNC machinery. Technical Data: Manufacturer: TRUMPF Laser GmbH, D-78713 Schramberg Model: TruDisk 5001 (6 C) Equipment No.: L4211M2236 Dljdpoxv D Aljfx Ab Toa Serial No.: 20-10-03-A105 Year of manufacture: April 2017 Rated voltage: 380 V (–10 %) … 460 V (+10 %), 3 AC + PE Power consumption: 28 kW / 29.5 kVA Rated current: 42 A / 400 V Frequency: 50 – 60 Hz Protection rating: IP 54 Weight: 820 kg CE marking: present Degree of Automation: Suitable for fully automated production lines. The TruDisk 5001 can be fully integrated into robotic or CNC controls via fieldbus, Ethernet, or analog interfaces and is prepared for Industry 4.0 applications.