Used 250 Kva for sale (19,281)

Condition: excellent (used), Chain hoists - DEMAG / STAHL - LIFTKET - 14 units: 1. Demag DKUN 10 - 2000 kg. 2. Demag PK 10 - 1000 kg. 3. Demag DKUN 5 - 500 kg. 4. Demag D-BE - 160 kg. 5. Demag PK 2 F - 500 kg. Gtsdovv Idwepfx Agbst 6. Demag PK 2 N-F - 250 kg. 7. Demag PK 1 N - 125 kg. 8. Demag DKUN 2 - 250 kg. 9. Demag PK 2 N - 500 kg. 10. Demag PKVUN 1 - 125 kg. 11. Demag PKUN 1 Motor - 125 / 250 kg. 12. Steel T 405 M - 1000 kg. 13. Steel T 302 S - 500 kg. 14. Liftket Star 021/51 - 500 kg.

Condition: good (used), Year of construction: 2014, functionality: fully functional, machine/vehicle number: K500-50739, total length: 14,000 mm, total height: 2,500 mm, total width: 3,600 mm, type of input current: three-phase, product height (max.): 100 mm, product height (min.): 30 mm, product length (min.): 500 mm, product length (max.): 1,800 mm, product width (max.): 1,500 mm, product width (min.): 600 mm, input voltage: 400 V, compressed air connection: 6 bar, input current: 33 A, working height: 900 mm, table width: 1,700 mm, table length: 2,000 mm, passage height: 250 mm, year of last overhaul: 2022, workpiece weight (max.): 100 kg, Equipment: documentation/manual, Dimensions of the entire machine: Width: 3,600 mm Length: 10,600 mm (without feed and deposit areas) Height: = 2,500 mm Working height: 900 + 50 mm Feed rate: 13 - 23 m/min (frequency-controlled) Properties of the PE shrink flat film • Shrink film suitable for the shrink sealing process. (Top and bottom films must be laterally sealable in the tunnel). • Biaxial shrinkage value of approximately 50-60% lengthwise, approximately 40-50% crosswise • Antistatic treatment. • Shrink film with needle perforation. Improves the shrinking process and has higher gas and water vapor permeability. Shrink film to be used • Biaxially shrinking, needle perforated. • Spooled on rolls, sound-tight and with straight edges. Foil thickness: Application: approx. 40 - 60 μm. Film widths: Application: 800 mm, 1100 mm, 2000 mm Roll outer diameter: max. 350 mm Core outer diameter: min. 90 mm Bottom film calculation: Package width + 200-250 mm Top film calculation: Package width + (2 x height) + 200-250 mm Technical component data: Conveyor belts: Infeed conveyor (W x L) 1,700 x 2,000 mm / Feed speed 13-23 m/min. Roller conveyor behind the tunnel (W x L) 1,700 x 2,000 mm / Feed speed 13-23 m/min. KFE standard film wrapping machine: Max. film roll width, top and bottom: 2,100 mm / Package height (passage height): max. 250 mm / max. Film roll diameter: 350 mm Film thickness: approx. 40-60 µm high-quality PE film / Weight: approx. 3,100 kg Side sealing: Sealing bar length: 1,850 mm / Adjustment range: 500 - 1,600 mm / Adjustable feed rate: 13 - 23 m/min. Shrink tunnel ST / lI -1800 -3000 -300: Gtodpfxovvlyij Agbst Clear hood opening: 1,860 mm wide / 300 mm high / Hood length: 3,000 mm / Transport length: 3,560 mm Adjustable feed rate: 6 - 23 m/min. The machine can be inspected at the production site.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2002, controller model: Cybelec DNC 1200, bending force (max.): 250 t, working width: 3,550 mm, distance between stands: 3,000 mm, overall weight: 18,500 kg, TECHNICAL DETAILS Press force: 250 t Bending length: 3,550 mm Distance between uprights: 3,000 mm MACHINE DETAILS Controlled axes: y1, y2, x, r, z1, z2, back gauge tilt Control unit: Cybelec DNC 1200 Dimensions & weight Footprint (L x W x H): approx. 4,300 x 2,750 x 3,750 mm Machine weight: approx. 18,500 kg EQUIPMENT Two-hand foot switch Lasersafe Fisseler Hydraulic tool clamping top and bottom Die shifting Gjdpfx Aox I Ebiogbstt Hydraulic crowning Support arms 1 set of upper and lower tools Safety guard

Condition: like new (used), Year of construction: 2012, input voltage: 400 V, 2 X Zentner Washer 250 - Screen Cleaning Units Unit 1 Unused and New Condition $20,000.00 USD Gsdpfx Asv Dpy Nsgbstt Unit 2 Used - Excellent Condition $16,000.00 USD

Condition: new, The ZNC-EDM 250 is a cutting-edge die sinking EDM machine in the Die Sinker EDM category, which is part of the EDM Machines group. Designed for mold and tool making, this machine excels in replicating injection molds and matrices with exceptional precision and surface quality. Its user-friendly CNC control streamlines the selection of work parameters, while the robust frame, equipped with preloaded ball screws on all axes, ensures low maintenance and high accuracy. The advanced spindle design with a dedicated lubrication circuit minimizes friction, thereby optimizing performance. With a compact design, this machine allows for efficient small part machining and features a separate dielectric reservoir for sustainable operation. Diagnostic systems contribute to the user-oriented experience, making it easy to learn and operate. For high-powered material removal and finishing in one process, the finely-incremented work parameters fulfill diverse operational needs. Don't miss the chance to enhance your production with this reliable machine—order online today to experience the precision and efficiency that KNUTH offers in the Die Sinker EDM category. Gsdpfx Asng Ai Isgbott

Condition: new, Year of construction: 2025, neu 2025 020156 prompt, Zwischenverkauf v Türkei 6720 € 129.7 € 1 250 kg 205 kg 150 mm 150 mm 360 ° 360 kgm 230 / 50 V / Hz 0.37 kW 0.25 kW Gedpfx Aex Urqkjgbott 0.1 - 3 U/min 30 s 600 mm M16x6 mm 550 mm 1000 mm 700 mm 1700 mm The positioners are available in standard sizes for load capacities from 150 kg to 3,000 kg. The frame is optimally designed for rotation and tilting operations. The positioners consist of a motor, gearbox, table tilting system, steel gears, and control system and are structurally optimally protected. For heavy workpieces, the positioners are mounted on the floor. The tables have radial T-slots that enable quick clamping of the workpieces. Tilting and rotation are controlled by steel gears. For safety, the positioner is equipped with a reduction gear that holds the table in the desired position. Foot pedal Cable for signal to welder Touchpanel for following functions: - rotation speed - operating modi (manual, segmentcycle, full circle) INCL. FOLLOWING OPTION: Pneumatic centering attachement

Condition: excellent (used), Thermo Scientific Heratherm Thermo Scientific Heratherm OMS180 Forced Air Drying Oven – 250 °C Product Description: For sale is a Thermo Scientific Heratherm OMS180 forced air drying oven. The unit comes from laboratory use and is in good used condition. Heating, forced air circulation, and controls are fully functional. Suitable for laboratory, industrial, educational, research, material and sample drying applications. Technical Specifications: Manufacturer: Thermo Scientific Model: Heratherm OMS180 Max. temperature: 250 °C Temperature control: Digital Interior: Stainless steel Forced air operation: Yes Power supply: 230 V / 50–60 Hz Power consumption: approx. 3.06 kW Protection rating: IP20 Gsdpfx Agjx Ugh Rjbett Weight & Dimensions: External dimensions (W × D × H): approx. 620 × 630 × 800 mm Internal volume: approx. 180 liters Weight: approx. 75 kg Important Note: “The table shown in the photos is not included in the sale.” Condition: used Scope of delivery: (See pictures) (Specifications and technical data are subject to change and errors!) If you have any further questions, feel free to contact us by phone.

Condition: good (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: B3170-0054, turning length: 700 mm, spindle speed (max.): 3,500 rpm, travel distance X-axis: 290 mm, travel distance Z-axis: 750 mm, rapid traverse X-axis: 20 m/min, rapid traverse Z-axis: 24 m/min, total height: 2,200 mm, total length: 5,000 mm, total width: 2,000 mm, quill diameter: 100 mm, overall weight: 7,000 kg, controller manufacturer: FANUC, controller model: SERIES 21i-TB, number of slots in tool magazine: 12, HYUNDAI - KIA SKT 250 M CNC Lathe Gjdpfx Aex T Ac Uogbett - Operating voltage: 200/220 V - Frequency: 50/60 Hz - Rated current: 89 A - Connection: 27 kVA - Max. machining diameter: 410 mm - Max. swing diameter over cross slide: 480 mm - Chuck size: 254 mm - Spindle bore: 95 mm - C-axis: 0.001° - Includes tailstock, a HAINBUCH collet chuck, a 12-station tool turret with live tooling, and a chip conveyor Attention: The item must be collected by binding agreement between 18 and 26 February 2026, on a date to be coordinated. FCA D-78087 Mönchweiler – loaded onto truck

Condition: like new (used), Year of construction: 2006, spindle motor power: 15 W, travel distance X-axis: 177 mm, travel distance Y-axis: 41 mm, travel distance Z-axis: 550 mm, rotational speed (min.): 5,000 rpm, total height: 2,065 mm, total length: 4,390 mm, total width: 1,741 mm, overall weight: 5,000 kg, CNC controller: Nakamura-Tome FANUC Capacity X-axis travel mm: 177,5 Y-axis travel mm: ± 41 Z-axis travel mm: 550 B-axis travel mm: 689 C-axis: 360º (0,001º) Turning length mm: 500 Max. turning diameter mm: ø: 190 Distance between spindle centers mm: 780 Bar work capacity mm: 51 Upper turret Tool holder: VDI-30 Number of tool slots St .: 12 Speed driven tools RPM: 3.600 Drive power driven tools kW: 5.5 / 3.7 Main spindle Speed spindle rpm: 5.000 Drive power spindle kW: 15 / 11 Maximun torque Nm: 47,2 Counter spindle Gtodjx Dbxgjpfx Agbjt Speed spindle rpm: 5.000 Drive power spindle kW: 11 Equipment Chip conveyor Part catcher Bar Loader RBK 10016 Milling function Working time hours Potencial nominal kVA: 31,43 Basic machine dimensions / weight Length mm: 4.390 Width mm: 1.741 Height mm: 2.065 Weight kg: 5.000

Condition: used, Year of construction: 2017, Used unit Gtjdpjx Twh Ssfx Agbot Year of manufacture: 2017 Extraction side: right Test mark: H 3 Nominal airflow: 3534 m³/h Max. negative pressure: 2750 Pa Connection diameter: 250 mm Filter area: 32 m² Dust class: "M", AWN 16 Motor power: 5.5 kW Filter regeneration: pneumatic With fire extinguisher as extinguishing device Sound pressure level: 70 dB(A) Incl. mounted switch cabinet Incl. forklift brackets Weight: 962 kg LxWxH: 3650x1540x2570 mm Availability: short-term Location: Flörsheim

Condition: used, Year of construction: 2000, greates pass round over bed 520 mm swing diameter over bed slide 480 mm turning length 3000 mm control 840 D SIEMENS number of tools 12 Driven tools - quantity 6 spindle bore 103 mm c-axis ja 0 Scope of delivery of the basic machine: SINUMERIK 840 D 3 controlled axes Rotation Ø over bed 520 mm Turning Ø over bed slide 480 mm Tool carrier with 12 cylindrical shank holders Ø 50 mm 1-stage AC main drive, 53 kW, 50 % ED Speed range 30 - 3000 min-¹ Main spindle head size 8 Gtedpfswp S Sqsx Agbjt Clamping door for clamping devices chip conveyor THREE-DIMENSION 3000 mm 12 cylindrical shank holders DIN 69880-50x78 of which 6 positions can be equipped with driven tools, Power 6 kW at 60 % ED, speed range 20-2500 min-¹ 2 gear stages C-AXLE Speed range 0-20 min-¹ Max. Angle specification 9999.999° Working range according to work area diagram POWER CHUCK 3 NHF 315-82 A8 FABR. FORKARDT with centrifugal force compensation, Outer Ø 315 mm, bore Ø 82 mm, with hard top jaws, ground, rod material Ø max. 63 mm including draw tube and attachment

Condition: new, Year of construction: 2025, neu 2025 020157 prompt, Zwischenverkauf v Türkei 6320 € 121.98 € 1 250 kg 150 mm 150 mm Gtedpsx Urpmsfx Agbot 360 ° 360 kgm 230 / 50 V / Hz 0.37 kW 0.25 kW 0.1 - 3 U/min 30 s 600 mm M16x6 mm 550 mm The positioners are available in standard sizes for load capacities from 150 kg to 3,000 kg. The frame is optimally designed for rotation and tilting operations. The positioners consist of a motor, gearbox, table tilting system, steel gears, and control system and are structurally optimally protected. For heavy workpieces, the positioners are mounted on the floor. The tables have radial T-slots that enable quick clamping of the workpieces. Tilting and rotation are controlled by steel gears. For safety, the positioner is equipped with a reduction gear that holds the table in the desired position. Foot pedal Cable for signal to welder Touchpanel for following functions: - rotation speed - operating modi (manual, segmentcycle, full circle) OPTION: Pneumatic centering attachement

Condition: refurbished (used), operating hours: 22,000 h, In our stock in Wellingborough, Northamptonshire is this fully refurbished Arburg 420C 1000 – 250 VU injection moulding machine with vertical clamp and injection. Ideal for insert moulding as an operator can easily and ergonomically load inserts. The vertical clamp means inserts are more likely to stay in place. This machine has a 30mm plasticising unit which gives a maximum shot weight of 89 (PS) (g). As you’d expect from us, this machine has been fully refurbished and is now completely fault & leak free. With low lifetime hours of only 23k, it really is in excellent condition throughout. The plasticising unit is holding max pressure throughout the range, the pump is quiet, the platens are in great order and we’ve done great work with the general cosmetics. Machine is now available for a full demonstration as and when required. Gtsdpol Tnz Eefx Agbjt Refurbished machines undergo a comprehensive test procedure during which every function of the machine is tested and if necessary repaired. A production run of at least 5000 fault free cycles prior to sign off ensures trouble free operation once delivered. Machines are ultra clean and cosmetically as good as we can get them. We guarantee our refurbs are delivered fault free and leak free with a 3 month (parts only) warranty. Prices shown are ex-works, but we can quickly provide DAP (Delivered at Place) Incoterm pricing on request. We can take out the hassle and additional costs of purchasing machinery within the UK and EU. Contact us with a potential delivery address and we'll do the rest.

Condition: good (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 01-003191/001, total length: 3,000 mm, total width: 2,200 mm, total height: 8,000 mm, overall weight: 18,000 kg, load capacity: 22,000 kg, SSI SCHÄFER SHUTTLE-250-1850 x 863-NT Vertical Carousel with Contents - Permissible total load capacity: 22,000 kg - Operating voltage: 400 V - Rated current: 3 x 8.0 A - Frequency: 50/60 Hz - Connection: 4.5 kVA - Permissible compartment load with even load distribution: 270 kg - Compartment dimensions: 1850 x 863 mm Godjx Tzm Ejpfx Agbjtt - Contents include various tools such as ratchets, clamps, threading dies, pneumatic accessories, various electrical devices, various hydraulic accessories, grinding machine accessories, grinding wheels, screws, springs, hoses, electrical accessories, clamping devices, saw blades, welding and cutting accessories, belts, hammers, pliers, hex keys, chisels, and other tool requirements Note: The item must be collected on a binding date to be agreed upon between February 18th and 26th, 2026. FCA D-78087 Mönchweiler – loaded on truck

Condition: good (used), Year of construction: 1999, operating hours: 772 h, overall weight: 14,000 kg, fuel type: diesel, power: 704 kW (957.17 HP), nominal power (apparent): 880 kVA, PERKINS Diesel LEROY SOMER generator Gedpfsuh Tr Ejx Agbett soundproofed container

Condition: used, Tumbler Iglu Scheid with cooling Volume: 250 liters Dimensions: 140x120x195cm Electrical power: 6.5kW/13kW Gtedpfx Agen Nw R Rjbet

Condition: excellent (used), Year of construction: 2012, Large grinder for fresh meat, these models were previously known as Wolfing C250UNI. Excellent condition. With de-gristle unit. Gtjdpfx Agsvvn Icebet

Condition: excellent (used), functionality: fully functional, Catalogue number 7668 TECHNICAL DATA - Track width: 250mm - Shaft width: 450mm - Max saw blade diameter for multi-blade saw: 350mm - Max saw blade diameter for edger: 350mm - Saw blade bore diameter: 80mm - Max cutting height for multi-blade saw: 120mm Gjdpfsx Tpqxjx Agbott - Max cutting height for edger: 100mm - Table width (with clearance): 900mm - Table length: 1770mm - From above: - Kickback pawls - Feed roller, pressing, metal, smooth - Kickback pawls - Pressing feed roller, slip type - Shaft with saws - Pressing feed roller, slip type, metal, 2 pcs - From below: - Guide rail - Kickback pawls - Crawler track - Central lubrication - Stepless feed speed adjustment - Feed motor: 1.1kW - Main motor: 22kW - Overall dimensions (L/W/H): 2200x1600x1800mm – Weight: 1900kg – German-made – Shaft with floating blade for edging – Used multi-blade saw, in very good condition Net price: 54,900 PLN Net price: 13,070 EUR depending on the exchange rate of 4.2 EUR (Prices may change with significant exchange rate fluctuations)

Condition: used, Year of construction: 1977, pressure 250 t Gtedpfxsvuk Trj Agbst distance between columns 930 mm stroke 200 mm Distance table/ram, stroke up 600 mm table surface area 900 x 860 mm die cushion capacity 100 t die cushion stroke 50 mm die cushion area 350 x 400 mm table height over floor 950 mm side window 380 x 380 mm ram surface 850 x 700 mm feed down 400 mm/s feed up 400 mm/s working feed 30 mm/s oil volume 350 l power capacity 45,0 kW weight 11,5 t Dimensions (WxDxH) 2,0 x 1,2 x 3,4 m permitted only for safe tools or fixed screen according to the German Safety Regulations (UVV) with oilhydraulic drive, controllable dependent on pressure/time and way, hydraulic drawing cushion in table, mechanical depth stop with hydraulic cutting impact cushioning no foundation pit necessary as is where is, WITHOUT putting into operation / WITHOUT additional work

Condition: ready for operation (used), Year of construction: 2008, Nakamura Tome WT 250 CNC Lathe (2008) Manufacturer: Nakamura Tome Model: WT 250 CNC Lathe Year of manufacture: 2008 Condition: used, under power in production Gedpex Tir Nsfx Agbott Control: Fanuc 18i 4 Axes: X, Y, C, Y Gantry Loader GR 203 2x Spindle 2x Turret (equipped) Further information available upon request.

Condition: used, Year of construction: 1984, material width 250 mm material thickness 0,2 - 2,0 mm no. of straightening rolls 7 straightening roll diameter 60 mm run-in height 1250 mm speed 5 - 30 m/min power requirement 2,2 + 1,3 kW Weight 0,65 t dimensions (WxDxH) 1,05 x 1,25 x 1,5 m with infinitely variable drive, material inlet inclineable, straightening rolls individually manually adjustable, pneumatic opening of the upper roller cassette, coil loop control via arm as is where is, WITHOUT putting into operation Gsdpevuk Sbefx Agbstt Price for commissioning (in given condition) on request

Condition: used, Year of construction: 1996, pressure 250 t distance between columns 2100 mm stroke 300 mm Distance table/ram, stroke up 850 mm Table surface area 2000 x 1300 mm Table height above floor 900 mm Side window 1300 mm Ram surface 2000 x 1300 mm Oil volume 1300 l Power capacity 60,0 kW Weight 39,5 t Dimensions (WxDxH) 3,4 x 3,4 x 4,6 m permitted for manual loading according to the CE Regulations with oil-hydraulic drive, hydraulic cutting impact cushioning, hydraulic ram interlocking No foundation pit necessary can be offered without putting into operation, with putting into operation or alternatively with new control Siemens S 7-1500 F Gedpfx Agsvuuidebott

Condition: used, Year of construction: 2006, pressure 250 t distance between columns 3000 mm stroke 600 mm Distance table/ram, stroke up 900 mm Table surface area 2500 x 1300 mm Table height above floor 1050 mm Side window 1350 mm Ram surface 2500 x 1300 mm Speed down 500 mm/s Speed up 400 mm/s Working speed 36 - 64 mm/s Oil volume 2700 l Power capacity 137,0 kW Weight 54,0 t Dimensions (WxDxH) 4,1 x 4,55 x 6,15 m permitted for manual loading according to the CE Regulations Gjdpsvuuhajfx Agbott with oil-hydraulic drive, hydraulic cutting impact cushioning, hydraulic ram interlocking No foundation pit necessary can be offered without putting into operation or alternatively with new control Siemens S 7-1500 F

Condition: used, Year of construction: 1977, pressure 250 t stroke 40 - 190 mm no. of strokes 40 /min throat 500 mm passage to the back 1050 mm Gjdpfxjvuuaij Agbjtt dayligth 615 mm table surface area 1380 x 880 mm hole in the table 450 mm table height over floor 800 mm ram surface 1200 x 800 mm ram adjustment 125 mm power requirement 22,0 kW Weight 24,0 t dimensions of the machine ca. 2,0 x 2,5 x 3,95 m x m x m permitted for manual loading according to the German Safety Regulations (UVV) with motor, pneumatic clutch/brake combination, hydraulic overload protection in ram, pneumatic counterbalance in ram, motoric ram adjustment, manual stroke adjustment, motoric centralized lubrication, bolster plate, two-hand operation

Condition: used, Year of construction: 1980, pressure 250 t distance between columns 2000 mm stroke 600 mm Distance table/ram, stroke up 1000 mm table surface area 1700 x 1300 mm table height over floor 800 mm die cushion pressure in table 100 t die cushion stroke in table 180 mm Die cushion area in table 1650 x 700 mm side window 1000 mm ram surface 1700 x 1400 mm weight 31,1 t dimensions (WxDxH) 3,3 x 1,9 x 4,85 m Height above floor 4,55 m permitted for manual loading according to the German Safety Regulations (UVV) with oil-hydraulic drive, hydraulic drawing cushion in table, hydraulic cutting impact No foundation pit necessary can be offered without putting into operation, with putting into operation in given condition or alternatively with new control Siemens S 7-1500 F Gsdjvut Tnopfx Agbstt