Skip container

Monza Absetzcontainer - 7 m³ - offen

Condition: good (used), Good, used condition Main motor: 11 kW Maximum throughput: 200 kg/h Year of manufacture: 12/2008 / Technically tested: 01/2025 Briquettes: 150x60 mm Dedpfxet Hxude Ab Tewf . *Used machine, purchased as is Functional guarantee upon delivery

Condition: used, functionality: fully functional, Year of construction: 2021, operating hours: 1,330 h, load capacity: 5,000 kg, lifting height: 5,500 mm, free lift: 1,765 mm, fuel type: diesel, mast type: triplex, construction height: 2,910 mm, power: 55 kW (74.78 HP), fork length: 1,200 mm, empty load weight: 7,760 kg, total length: 3,748 mm, drive type: Diesel, construction width: 2,080 mm, All-terrain forklift Load center: 500 Fork width: 150 mm Fork thickness: 60 mm ISO class: ISO class 4 = 5,000 - 10,000 kg Dwedpfx Aen Hcw Dsb Tjf Mast type: Triplex Transmission: torque converter Speed class: 20 Technical condition: Very good Front tires Type: Pneumatic Front tires Size: AS 340/80 R18 Front tires Condition: 80 - 100% Rear tires Type: Air Rear tires Size: AS 18-22.5 163A8 Rear tires Condition: 80 - 100% Description: The M 50-4 rough terrain forklift is designed for work on difficult terrain or with obstacles. With 4 drive wheels and a ground clearance of 43 cm, this forklift offers good maneuverability under all circumstances. A wide range of tires is available to adapt to different terrains. This serves to optimize your productivity. Accessible from both sides, the pivoting cab offers a spacious operator's area with ergonomic controls. The high driving position offers a 360° panoramic view for greater safety for the driver and his surroundings. Sideshift, 3rd valve, full cab, CE certificate, -service booklet -CE declaration -operator's manual -spare parts manual

Condition: new, functionality: fully functional, power: 55.9 kW (76.00 HP), gearing type: automatic, fuel type: diesel, color: red, overall weight: 4,960 kg, lifting power: 2,500 kg/m, lifting height: 4,452 mm, tire size: 16-70 R20, tire condition: 100 %, drive condition: 100 %, axle configuration: 2 axles, number of seats: 1, mast type: telescopic, digging bucket width: 2,000 mm, Year of construction: 2025, fuel: diesel, load capacity: 2,500 kg, Equipment: additional headlights, adjustable boom, all wheel drive, cabin, hydraulics, pallet forks, parking heater, soot filter, standard shovel, trailer coupling, H&R Telehandler 5025T – Your reliable wheel loader for demanding tasks in agriculture, construction, and industry. Advantages of the H&R 5025T Telehandler Powerful engine: The Yunnei DEF20CAF4 engine with 75 hp ensures maximum performance with lower fuel consumption and complies with the Euro 5 emissions standard. Easy operation: The 2-stage torque converter and all-wheel drive enable easy handling, even with heavy loads and difficult ground conditions. Dedpfsrgq Etox Ab Tjwf Compact design, high maneuverability: Despite its size and weight, the HR Wheel Loader 5025T is relatively maneuverable. Hydraulic quick coupler: With the hydraulic quick coupler, you can quickly and easily switch between different attachments. Expandable functions: Use the additional hydraulic control circuit to operate front-end tools such as mowers, bale grabs, snow plows, and much more. Comfortable cab for all-day use: The H&R wheel loader offers a spacious cab with an adjustable seat, diesel auxiliary heating, rearview camera, ventilation, and radio. This allows you to complete even longer jobs comfortably and safely. H&R loaders are technically and visually optimized in-house and thoroughly tested. Additionally, each machine receives extensive rust protection treatment. Our loaders are CE-compliant according to the EU Machinery Directive. Our machine has a TÜV Süd certificate for obtaining an individual operating permit in accordance with Section 21 of the German Road Traffic Licensing Regulations (StVZO) (road approval/operating permit as a self-propelled work machine). Key Features of the H&R 5025T Telehandler • Fully equipped • Extensively optimized in Germany • Telescopic boom increases the working reach • Lifts heavy loads up to 2.5 tons to a height of 4.45 meters (bottom edge of standard pallet forks) • Includes standard bucket (200 cm) and pallet forks • Powerful and powerful - versatile • Well-thought-out design ensures high maneuverability despite its size • Comfortable cab with heating and ventilation, plus radio (MP3 and USB) • Rearview camera with display • Diesel auxiliary heater • Joystick with electric gearshift for precise control • Additional hydraulic control circuit for attachments • LED work lights and windshield wipers for clear visibility in all weather conditions • Ball-head trailer hitch with socket for additional trailer use • 220V coolant preheater for reliable cold start capability and increased engine life • Hour meter for monitoring operating times and maintenance intervals • CE compliant according to the EU Machinery Directive • Includes a 1-year spare parts warranty Price Net: €32,690.00 VAT: €6,211.10 Gross: €38,901.10 Financing available! Optional Road approval available. Delivery available. Technical Details Engine: 4-cylinder Yunnei Engine power: 75 hp (55.8 kW) Emissions class: Euro 5 Lifting height: 4452 mm (bottom edge of standard pallet fork) Unloading height: 3780 mm (bottom edge of standard bucket, tipped out) Lifting capacity: 2500 kg Wheelbase: 2550 mm Tires: 16-70 R20 Dimensions: 5270 x 2080 x 2650 mm Weight: 4960 kg Accessories and spare parts are available from us. Please provide your telephone number when making inquiries!

Condition: excellent (used), LOADER (BRIDGE-FRAME) WITH DOUBLE PICK-UP STATION Dsdpjfi Tg Hjfx Ab Towf Vacuum system (with its pump) No. 2 Vertical supporting columns of the top supporting beam No. 1 Horizontal top supporting beam (where the carriage slide on) No. 1 Motorized sliding carriage with horizontal metal arms No. 2 Out-side rollers way (on gound) to in-feed pile of panels to the Loader Out-side motorized rollers table (which receives panels from the Loader) Separate electric and command panel Perimetral safety metal grids Working capacity (cycles/min) 16 (ca.) Min/Max panels thickness mm 10 / 50 (ca.) Min dimensions of the panels mm 250 x 320 (ca.) Max dimensions of the panels mm 1300 x 3000 (ca.) Total installed motor power Kw 30

Condition: ready for operation (used), functionality: fully functional, power: 114 kW (155.00 HP), gearing type: automatic, fuel type: diesel, color: orange, operation weight: 25 kg, tire condition: 50 %, axle configuration: 2 axles, number of seats: 1, Year of construction: 2015, operating hours: 8,454 h, machine/vehicle number: 250M301296, Equipment: UVV, additional headlights, air conditioning, cabin, crane, hydraulics, trailer coupling, 6.20 + 4.80 m Dedpfx Ajtucngsb Tewf incl. generator Sorting grab Polyp grab Lifting magnet all with quick coupler also available: Atlas 230MH | 2011 | 6.80 + 5.00 | Polyp grab Liebherr A904C | 2011 | 6.60 + 5.00 | Polyp grab

Condition: new, functionality: fully functional, Year of construction: 2024, operating hours: 43 h, load capacity: 3,200 kg, lifting height: 10,000 mm, fuel type: diesel, mast type: telescopic, power: 79 kW (107.41 HP), empty load weight: 7,330 kg, drive type: Diesel, Rigid telehandler Mast type: Telescopic Speed category: 40 km/h Condition: New machine Technical condition: New Front tyres type: Pneumatic Front tyres size: 400/70-24 Front tyres condition: 80 - 100% Rear tyres type: Pneumatic Rear tyres size: 400/70-24 Rear tyres condition: 80 - 100% Equipment: - 3rd hydraulic function, 4th hydraulic function - Rear work lights, front work lights - Heater - Full cab - Air conditioning - CE certification - Exterior mirrors Dwsdpfxow Eqddj Ab Tsf - Joystick control - Beacon - Windscreen wiper - LED lighting Specifications: - Road approval as towing tractor with trailer capability - 20.0 tonnes with 7-pin trailer socket - Fixed Dieci equipment carrier plate with dual hydraulic quick coupler, operated from the cab, for attachments including hydraulic coupling (Mandatory with adapter plate for forks when using quick change system) - Lifting capacity: 3200 kg - Lifting height: 9.0 m - Engine: KUBOTA 79.5 kW (107 hp) - Displacement: 3769 cm³ - Emission standard: Tier 4f - Steering: all-wheel steering / crab steering / front-wheel steering - Rear hydraulics - 40 km/h maximum speed - Air suspension seat - Mounting plate with hydraulically operated quick coupler - Steering indicator lamp

Condition: good (used), functionality: fully functional, Year of construction: 2021, operating hours: 3,000 h, machine/vehicle number: 42178149, Machine has connection to external power source. Can run on diesel or fully electrical. Very low costs per ton. Screenbox in feeder with adjustable screen. Dwedew Rzlzspfx Ab Tef

Condition: new, saw blade diameter: 400 mm, - Saw blade 400 mm Dsdpfx Aeu Si Ndeb Tjwf - Double miter - 4 pneumatic clamps - Mist lubrication system - Blow gun - Protective cap - documentation - 400V

Condition: new, Year of construction: 2025, Machining center with 4 CNC controlled axes for machining profiles made of aluminum, PVC, and steel Machine frame in stable welded construction, stress-relieved annealed, with hardened rail guides Protective cabin over the entire machining length Pneumatically opening safety door Milling spindle: 3.8/4.6 KW S1/S6 3.0/3.7 Nm S1/S6 max. 18,000 rpm, air-cooled with tool holder ISO 30 with minimum quantity cyclic spraying for tools with fill level monitoring Tool magazine: 5 positions, on the left side of the machine bed, for holding drilling, milling, and thread cutting tools, angle head, disc milling cutter up to Ø 150 mm Workpiece clamping: 4 pneumatic profile clamps, clamping range up to 250 mm automatic positioning via device on the Z-axis Workpiece positioning: One pneumatic reference stop each on the left and right of the A-axis Travel paths: X - Axis 3500mm Y - Axis 370mm Z - Axis 348mm A - Axis ±90° Travel speeds: X - Axis 70m/min. Y - Axis 30m/min. Z - Axis 30m/min. A - Axis 60°/sec Max. working areas: X - Axis 3270mm Y - Axis 250mm at 0° 116mm at ±90° of the A-axis Z - Axis:170mm at 0° 200mm at ±90° of the A-axis Operating software: CAD/CAM in 3D technology (option, included!) Programming system according to ISO standard Functionality: Linear and circular interpolation on two axes (X-Y) Three-side machining by swiveling the A axis 90°-0°-90° Face machining using a disc cutter Operating modes: One profile bar over the entire machining length Two profile bars in divided machining length Lubrication system: Automatically controlled central lubrication for all axes, ball screw drives and guides, with fill level monitoring Operation: 18.5" touchscreen Mouse + keyboard Connection data: Electrical: 400V/50Hz (3-Ph+N+PE), 16 A, Delivery without power cable Pneumatic: pressure 6 - 8 bar Dimensions and weight: Length: 5800mm Width: 1640 mm Height: 2000mm Dodpfx Abowrcwpo Tswf Weight: 2000 kg incl.: graphical programming software CM3D/CAD3D barcode reader additional network connection incl. remote maintenance/diagnosis for 1 year

Condition: good (used), fuel type: diesel, color: yellow, lifting height: 15,000 mm, axle configuration: 4x4, Year of construction: 2011, operating hours: 2,864 h, Equipment: all wheel drive, Drive: Wheel CE mark: yes Technical condition: good Visual appearance: good Delivery terms: EXW Production country: IT Please contact Vink Machinery for more information Dieci Pegasus 35.16 * 2011 * Diesel * 15.7 meters lifting height * 13.35 meters horizontal range * 4x4x4 * 3500 kg lifting capacity Dsdpfxoq Su Nbj Ab Towf * 13100 kg own weight * Inspection until May 2024 * including documents