Water blasting machine

METAL FINISCHING WBL 001

Condition: used, Falch 3 phase high pressure cleaner 500 bar pressure @ 15lpm only done about 360 hours and works perfectly. Sold with trigger but no hose used for cleaning boat hulls stone work excavator tracks and any cleaning where very high pressure is required Dcodpfx Asxc Numsc Hoi

Condition: ready for operation (used), Graf wet blasting system, suitable for finishing solid carbide tools. Dcodpfxey Ibvps Ac Hji

Condition: new, Year of construction: 2025, functionality: fully functional, pressure: 6 bar, compressed air connection: 6 bar, operating pressure: 6 bar, warranty duration: 12 months, total width: 2,400 mm, total height: 4,500 mm, total length: 3,800 mm, overall weight: 3,800 kg, inner dimension height: 600 mm, turntable diameter: 350 mm, Shotblasting machines with rotating satellites type PTR and SSR are designed to treat sensitive parts in singularly mode with any kind of shots. The nozzles are managed by a robot. The machine is equipped with a main indexed table that works as a pallet exchanger enabeling the entrance/exit of the parts into/out to the blasting chamber. The main table is equipped with 2 or 4 satellites; in accordance with production rate. One station is dedicated for loading/unloading, while another one (opposite to the loading area) is dedicated to the blasting/peening process. The nozzles are driven by a robot. The number of nozzles is defined according to the loading volume, the production rate and the geometry of the pieces. This machine is usefully for manual loading/unloading operation but it can be also equipped with an automatic handling device according to the process line request (2-axis gantry, robot…). Ventury system or Pressure type technology can be installed on such equipment. Installation of Magnetic Valves for shot flow check is also recomended. The machine can be equipped with up to three robots for peening. Dcedpfxewdgpgj Ac Hei

Condition: new, Year of construction: 2025, pressure: 6 bar, compressed air connection: 6 bar, operating pressure: 6 bar, warranty duration: 12 months, total width: 1,500 mm, total height: 1,000 mm, total length: 1,500 mm, type of input current: three-phase, suction capacity: 1,500 m³/h, turntable diameter: 1,200 mm, Equipment: cabin, Wet-blasting machines PP-UM are designed to manage an homogeneuos mixture of shot, air, water and as requested detergent. The final result is a soft blasting process on the surface (in comparison to a dry blasting process). The common media blasting shots are corundum, silicates and glass beads. A special pump (heavy duty design for aggressive liquids) allows to maintain homogeneously the solution and delivers the mixture to the blasting gun/guns. The compressed air guarantee the correct shot impact on the surface (6-8 bars). The process can be manual or fully automated as machines model PP-UA, complete equipped with in-out motorized work table, 2 axis gantry robot…) allow to set a fully automatic process. The machines can be equipped with paper-filter in order to remove the light oil contaminants to the recirculating solution (avoiding the degreasing of the pieces before the treatment). Dodpfxjwdgi Hs Ac Hjci

Condition: used, Year of construction: 2013, operating hours: 11,188 h, total height: 5,000 mm, inner dimension width: 250 mm, inner dimension height: 250 mm, workpiece weight (max.): 15 kg, Rotary indexing – shot blasting machine – shot peening Used for cold hardening of transmission components. Manufacturer: AUER Type: SA 1100 S5 Year of manufacture: 2013 Operating hours: 11,188 h Workpiece height: 250 mm Workpiece diameter: 250 mm Workpiece weight: 15 kg Dsdezdk Nnepfx Ac Heci Number of satellites/stations: 5 - Workpiece loading/unloading - Airlock - inlet - Blasting position 1 - Blasting position 2 - Airlock - outlet / cleaning Number of nozzles: 12 (individually controlled) Including filter system Overall height: 5.00 m Other dimensions, see photos. Well-maintained machine, from a highly reputable company, regularly serviced. The machine can still be inspected while powered on.

Year of construction: 2025, condition: new, functionality: fully functional, The Blasting room (also called a sandblasting room or shot blasting room) is an enclosed area designed for cleaning, roughening, or surface preparation of materials such as metal, concrete, stone, or wood. Inside the room, abrasive materials (like quartz sand, steel grit, aluminum oxide, or glass beads) are propelled at high speed using compressed air to remove rust, paint, scale, or dirt from the surface and achieve the desired roughness. Main Components of a Sandblasting Room Dedpsxr Am Usfx Ac Heci Blasting Chamber / Room: A steel-structured enclosure with wear-resistant lining to protect the interior walls. Blasting Machine (Nozzle System): Mixes compressed air and abrasive media, then directs it toward the workpiece. Dust Collection System (Filter Unit): Removes airborne dust and maintains clean air inside the room. Abrasive Recovery System: Collects used abrasive material, cleans it, and recycles it for reuse. Operator Equipment: The operator wears protective gear, including a helmet with air supply, gloves, and a blast suit. CODE DIMENSIONS OF SANDBLASTING AREA (L x W x H) mm KO - 1 4.000 x 4.000 x 3.000 KO - 2 6.000 x 3.000 x 3.000 KO - 3 6.000 x 5.000 x 5.000 KO - 4 10.000 x 5.000 x 5.000 KO - 5 12.000 x 5.000 x 4.000 KO - 6 15.000 x 5.000 x 5.000 KO - SPECIAL 27.000 x 18.000 x 9.000