Sell machine Sell
Watch list (0) Login
Menu
  2. Cleaning machines & facility management equipment
  3. Scrubber driers
  4. Listing ID: A19579951
Home Page Cleaning machines & facility management equipment Scrubber driers Listing ID: A19579951

Scrubber
Meijer SR1300DC Demo model

Condition
Used
Location
Nederland Netherlands
Scrubber Meijer SR1300DC Demo model
Scrubber Meijer SR1300DC Demo model
Scrubber Meijer SR1300DC Demo model
Scrubber Meijer SR1300DC Demo model
Scrubber Meijer SR1300DC Demo model
Scrubber Meijer SR1300DC Demo model
Scrubber Meijer SR1300DC Demo model
more Images
Meijer SR1300DC Demo model
Meijer SR1300DC Demo model
Meijer SR1300DC Demo model
Meijer SR1300DC Demo model
Meijer SR1300DC Demo model
Meijer SR1300DC Demo model
Meijer SR1300DC Demo model
Show map
Show images
Show map

Machine data

Machine type:
Scrubber
Manufacturer:
Meijer
Model:
SR1300DC Demo model
Condition:
used
Operating hours:
12 h

Price & Location

Location:
Nederland Netherlands
Call

Details about the offer

Listing ID:
A19579951
Reference number:
251868
Update:
16.07.2025

Description

This scrubber-dryer has only been used for a few hours during demonstrations!

Looking for the best solution for the largest spaces? From airports and stations to shopping centres, the Meijer SR1300DC scrubber-dryer delivers powerful cleaning performance across expansive surfaces. Thanks to its high-quality construction, this robust machine will last for years to come. With only 12 operating hours on the meter, this unit is practically like new.

Kedpfowzvbtex Ahvsdi
The four disc brushes feature an adjustable brush pressure up to 180 kg. The central cylindrical brush is also height-adjustable. Want to sweep and scrub in one pass? This is possible with the sweep-scrub combination, delivering even cleaning across up to 130 cm in width. The sliding frame allows for easy and efficient cleaning along racking and walls. The colour touchscreen display and three different cleaning programmes (ECO, STANDARD, or PLUS) provide simple yet precise operation. Additionally, the filters and tanks are easily accessible via the rear access step.

Additional specifications:

- Working capacity: 7,800 m²/h
- Battery run time: 4 hours
- Scrubbing width: 130 cm
- Squeegee width: 149.5 cm
- Clean water tank capacity: 300 litres
- Dirty water tank capacity: 360 litres
- Number of disc brushes: 4 (Ø34.3 cm)
- Number of cylindrical brushes: 1 (Ø 30 x 110.6 cm)
- Power supply: 36V battery
- Maximum speed: 6 km/h
- Brush pressure: 130-180 kg
- Drive wheel: Front
- Noise level: < 70 dB (A)
- Weight (excluding batteries): 840 kg
- Weight (including batteries): 1,620 kg
- Dimensions: 235.5 x 148.6 x 180.7 cm

Would you like to know more about the features of the Meijer SR1300DC, or see it in action during a demonstration at your location? Please contact us—our advisor will be happy to provide further information!

The listing was translated automatically. Translation errors are possible.

Seller

Registered since: 2020

97 listings online

Call

Send inquiry

Countryus 
Germany
Austria
Switzerland
United States
Great Britain
France
Belgium
Spain
Mexico
Italy
Netherlands
Poland
Russian Federation
Belarus
Ukraine
Estonia
Turkey
New Zealand
Ireland
Czech Republic
Denmark
Finland
Sweden
Norway
Luxembourg
Greece
Lithuania
Latvia
Iceland
Portugal
Brazil
Venezuela
Argentina
Hungary
Slovakia
Romania
Moldova
Slovenia
Serbia
Montenegro
Albania
Croatia
Bulgaria
Macedonia
Bosnia and Herzegovina
Israel
Egypt
Morocco
India
Indonesia
South Korea
Japan
Thailand
Malaysia
Vietnam
China (People's Republic of China)
Taiwan
Iran
Bangladesh
Note: Your inquiry will be forwarded to all sellers in this machine category. This allows you to receive a large number of offers.
The inquiry could not be sent. Please try again later.
Privacy statement

Telephone & Fax

+31 342 2... show
These listings may also fit your interest.
Listing
Chamber filter press
Chamber filter press
Chamber filter press
Chamber filter press
more images
Germany Voerde (Niederrhein)
18,542 km
Chamber filter press
Call
Condition: good (used), Plant: REWA Chamber Filter Press used Type: 470-15-25K-HP Design: side rail guided Filter plate format: 470x470 mm Number of plates: 15 Filter plates: PP Kedsqakbrspfx Ahvedi Filter cloths: optionally available in coordination with the medium Press capacity: approx. 57 dm3 Filter pressure: approx. 15 bar Material of parts in contact with the product: Flange, feed-throughs stainless steel, PP or rubberized Material of parts not in contact with the product: Stainless steel Purchase or hire: Inspections of the systems by arrangement at our factory. Other: We can supply you with used equipment ready for operation or refurbished according to your wishes and requirements. Would you like to rent or buy this system? Please contact us, we are at your disposal.
See details
Listing
Mobile crane JMG MC 25S
Mobile crane JMG MC 25S
Mobile crane JMG MC 25S
Mobile crane JMG MC 25S
Mobile crane JMG MC 25S
Mobile crane JMG MC 25S
Mobile crane JMG MC 25S
Mobile crane JMG MC 25S
Mobile crane JMG MC 25S
Mobile crane JMG MC 25S
Mobile crane JMG MC 25S
Mobile crane JMG MC 25S
more images
Germany Ratingen
18,561 km
Mobile crane
JMGMC 25S
Call
Condition: like new (used), functionality: fully functional, power: 4 kW (5.44 HP), fuel type: electric, color: silver, overall weight: 2,460 kg, mast type: telescopic, Year of construction: 2022, operating hours: 21 h, machine/vehicle number: 0943, Small, compact, and maneuverable: these are the key advantages of our 2.5-ton electric mobile crane. However, there is no doubt that it is capable of handling “big” tasks, as the crane delivers full performance with a maximum lifting capacity of 2,500 kilograms. The 2.5-ton electric mobile crane comes standard with non-marking tires that do not leave chalk residues. The crane's 2 kW electric motor offers precise control and, thanks to a powerful 24 V, 420 Ah battery, can operate for up to 8 hours without needing to be recharged. The telescopic boom extends proportionally and can be further extended with a jib on request. JMG MC 25S - Capacity 2,500 kg - Net weight 2,460 kg - Width 900 mm - Height 1,600 mm - Drive Electric Kdedpfx Asw S Ii Njhvji - Power output 4 kW - Tires Solideal Magnum - Hydraulic winch - Telescopic boom - Counterweights - Battery 24 V 420 Ah - Automatic braking system - Front-wheel drive - 2 gear stages - Radio remote control - Manual boom extension - Electronic load monitoring - Boom angle +60° / -15° - Ground clearance 70 mm - Tires - front 18 x 7-8 - Tires - rear 15 x 4.5-8 - Operating manual - Electric motors - Insulation class H
See details
Listing
Turntable Welding table Heinrichsglück - Mechacon Horizontaldrehtisch HDT10.000-P1.500
Turntable Welding table Heinrichsglück - Mechacon Horizontaldrehtisch HDT10.000-P1.500
Turntable Welding table Heinrichsglück - Mechacon Horizontaldrehtisch HDT10.000-P1.500
more images
Germany Soest
18,477 km
Turntable Welding table
Heinrichsglück - MechaconHorizontaldrehtisch HDT10.000-P1.500
Call
Year of construction: 2022, condition: new, Load capacity: 10.000kg Speed: 0.03- 1.6 rpm faceplate diameter: 1.500mm, expandable to 2.500mm welding current transmission: 800A Kdsdpfsfxgp Uox Ahvsi
See details
Listing
Center Lathe HEIDENREICH & HARBECK Hamburg 540-2000
Center Lathe HEIDENREICH & HARBECK Hamburg 540-2000
Center Lathe HEIDENREICH & HARBECK Hamburg 540-2000
Center Lathe HEIDENREICH & HARBECK Hamburg 540-2000
Center Lathe HEIDENREICH & HARBECK Hamburg 540-2000
more images
Germany Germany
18,260 km
Center Lathe
HEIDENREICH & HARBECKHamburg 540-2000
Certified Dealer
Call
Condition: used, Technical details: turning diameter over bed: 560 mm turning diameter over support: 280 mm turning length: 2000 mm centre height: 280 mm centre distance: 1600 mm spindle bore of work spindle: 65 mm range of revolution per miute: 9...1800 / 24 step U/min longitudinal feeds:: 0,025-0,09 mm/U cross feed: 0,012-0,045 mm/U tailstock quill adjustment:: 225 mm tailstock taper MT: MK5 total power requirement: 18 kW weight of the machine ca.: 3,8 t dimension machine xH: 3,7 x 1,6 x 2,05 m Kedpfewa I Shox Ahvjdi Three-jaw chuck D=320mm Top slide rotatable 45 degrees right and left *
See details
Listing
Slewing crane Drehkräne mit Vakum Sauger
Slewing crane Drehkräne mit Vakum Sauger
more images
Germany Pleystein
18,362 km
Slewing crane
Drehkränemit Vakum Sauger
Certified Dealer
Call
Condition: used, • Load capacity 350 kg • 6 vacuum suction cups, 250 mm diameter, adjustable • Vacuum lifter can rotate 90° and tilt 90° • Suction cups with guide tube and electric trolley • 4 units available, brand new and unused • Immediately available IV: + Design Standards 1. The construction of the unit strictly complies with European CE standard EN13155:2016, American ASME (Mechanical Engineering Association) B30-20-2006, and German UVVI8 regulations. The key design parameters exceed the requirements of the aforementioned standards. 2. Safety factor: The main structure features a factor of 4.0, vacuum safety level is 65%, and the standard safety level is 85%, which is 20% above the standard safety requirement. V+ Equipment Inspection and Standards 1. General Check that all materials are complete, inspect if the equipment exterior is painted or scratched, check for damage to the suction cups and pipes. 2. Pre-shipment Inspection © Equipment suction test © Equipment pressure holding test © Alarm system test © Various control components Kedpfsxnvq Eox Ahvjdi • Price on request
See details
Listing
Crane JUNGHEINRICH Hiab 055
Crane JUNGHEINRICH Hiab 055
Crane JUNGHEINRICH Hiab 055
Crane JUNGHEINRICH Hiab 055
Crane JUNGHEINRICH Hiab 055
Crane JUNGHEINRICH Hiab 055
Crane JUNGHEINRICH Hiab 055
Crane JUNGHEINRICH Hiab 055
Crane JUNGHEINRICH Hiab 055
Crane JUNGHEINRICH Hiab 055
more images
Germany Willich
18,581 km
Crane
JUNGHEINRICHHiab 055
Certified Dealer
€30,000
Fixed price plus VAT
Call
Condition: excellent (used), Year of construction: 2004, winch inkl. lifting capacity max. 2t. auf 2,7 Meter lifting capacity max. 1 Tonne auf 5,3 Mete Kdsdpfx Asq N E U Ashvei Number of working hours 270 h electrical ja
See details
Listing
CNC Horizontal Machine centers Biesse Skill 12.24 G FT 2014 Biesse Skill 12.24 G FT
CNC Horizontal Machine centers Biesse Skill 12.24 G FT 2014 Biesse Skill 12.24 G FT
CNC Horizontal Machine centers Biesse Skill 12.24 G FT 2014 Biesse Skill 12.24 G FT
CNC Horizontal Machine centers Biesse Skill 12.24 G FT 2014 Biesse Skill 12.24 G FT
CNC Horizontal Machine centers Biesse Skill 12.24 G FT 2014 Biesse Skill 12.24 G FT
CNC Horizontal Machine centers Biesse Skill 12.24 G FT 2014 Biesse Skill 12.24 G FT
CNC Horizontal Machine centers Biesse Skill 12.24 G FT 2014 Biesse Skill 12.24 G FT
CNC Horizontal Machine centers Biesse Skill 12.24 G FT 2014 Biesse Skill 12.24 G FT
CNC Horizontal Machine centers Biesse Skill 12.24 G FT 2014 Biesse Skill 12.24 G FT
CNC Horizontal Machine centers Biesse Skill 12.24 G FT 2014 Biesse Skill 12.24 G FT
more images
Netherlands Wijchen
18,567 km
CNC Horizontal Machine centers Biesse Skill 12.24 G FT 2014
BiesseSkill 12.24 G FT
Certified Dealer
€21,000
Fixed price plus VAT
Call
Condition: used, Year of construction: 2014, CNC Machining Center Biesse skill 12 24 G FT Year of construction 2014 Machine no. 60961 Recording HSK F63 10x vertical drilling 12 switch positions Software: BiesseWorks X axis 2465 mm Y-axis 1260 mm Z axis 324 mm Disassembled for transport on normal trailer; 4500x2200x2400mm; Own weight 2000kg - Year: 2014 - Documentation available: Yes - CE certificate present: No - Tool clamping system: HSK-F63 - Drilling unit present: Yes - └ Vertical drilling spindles [pcs.]: 10 - Tool changer positions [pcs.]: 12 - Working range X [mm]: 2465 - Working range Y [mm]: 1260 - Z-axis working range [mm]: 324 Kdodpfx Ahjwnhanevsi Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Glenn Smeets
See details
Listing
Welding turn table Protec 10 Ton RB 10
Welding turn table Protec 10 Ton RB 10
Welding turn table Protec 10 Ton RB 10
Welding turn table Protec 10 Ton RB 10
Welding turn table Protec 10 Ton RB 10
Welding turn table Protec 10 Ton RB 10
Welding turn table Protec 10 Ton RB 10
Welding turn table Protec 10 Ton RB 10
more images
Germany Hergensweiler
18,638 km
Welding turn table
Protec 10 TonRB 10
Certified Dealer
Call
Condition: as good as new (ex-display), Year of construction: 2023, Container turning device 10 tons load capacity Speed infinitely variable Hand and foot remote control Diameter from 320mm to 2800mm Ksdpfjd Nmx Tex Ahvedi Roller diameter 300mm speed 6 - 60 m./h power 2 x 0,55 KW
See details
Listing
Automatic hacksaw Pedrazzoli Super brown 350 AP
Automatic hacksaw Pedrazzoli Super brown 350 AP
Automatic hacksaw Pedrazzoli Super brown 350 AP
Automatic hacksaw Pedrazzoli Super brown 350 AP
Automatic hacksaw Pedrazzoli Super brown 350 AP
Automatic hacksaw Pedrazzoli Super brown 350 AP
Automatic hacksaw Pedrazzoli Super brown 350 AP
Automatic hacksaw Pedrazzoli Super brown 350 AP
Automatic hacksaw Pedrazzoli Super brown 350 AP
Automatic hacksaw Pedrazzoli Super brown 350 AP
Automatic hacksaw Pedrazzoli Super brown 350 AP
Automatic hacksaw Pedrazzoli Super brown 350 AP
Automatic hacksaw Pedrazzoli Super brown 350 AP
Automatic hacksaw Pedrazzoli Super brown 350 AP
Automatic hacksaw Pedrazzoli Super brown 350 AP
more images
Spain Balaguer
19,532 km
Automatic hacksaw
PedrazzoliSuper brown 350 AP
Certified Dealer
Call
Condition: like new (used), Year of construction: 2004, functionality: fully functional, machine/vehicle number: 051888, Used automatic disc cut-off saw Brand: Pedrazzoli Model: SB 350/45 AP Registration number: 051888 Year: 2004 Ksdpsrfw Ikjfx Ahvodi Head block rotation mechanism for angled cuts up to 45° to the left with locking lever. Pneumatic and anti-burr removable vice. Pneumatic cylinder for head movement, with brake for speed regulation. Transmission with double extensible pulley for variable speed from 15 to 90 m/s. Tilting head on adjustable self-lubricating bushings. 600 mm pitch feeder controlled by pneumatic cylinder. Repeat up to a maximum of 9 steps, to obtain a total stroke of 5400 mm. Maximum feeder clamp opening 160 mm. Programmable piece counter. Minimum final cut waste of 160 mm. Feeder speed regulating valve. Ammeter. Reverse gear. Emergency button and switch with padlock on the control panel. Blade lubrication-cooling system with electric pump. Coolant tank with removable pump for tank cleaning. Integral guarding designed for quick blade change. Blade disc Ø 350 mm. Cutting capacity: Round tubes 0°: 102mm 45° right: 102mm Square tubes 0°: 85mm 45° right: 90mm Rectangular tubes 0°: 158 x 85mm 45° right: 120 x 85mm Features: Three-phase 380V Dimensions: 1300 x 1350 x 1600 mm Work station height: 950 mm Weight: 420 kg
See details
Listing
Vessel Turning Unit Dumeta D-CHGK-5
Vessel Turning Unit Dumeta D-CHGK-5
Vessel Turning Unit Dumeta D-CHGK-5
Vessel Turning Unit Dumeta D-CHGK-5
more images
Germany Niederlangen
18,411 km
Vessel Turning Unit
DumetaD-CHGK-5
Certified Dealer
Call
Condition: new, weight max. 5,0 t workpiece diameter 100 - 2500 mm total power requirement 2 x 0,37 kW Kodpfx Ahsgvwgcovodi load capacity drive unit max. 2500 kg load capacity rotating unit max. 2500 kg table turning speeds 100 - 1000 mm/min diameter of running wheel 250 x 140 mm weight of the machine ca. 0,9 t Incl. double foot pedal (start-stop / left-right) Incl. remote control (on the cable)
See details
Preview Trust Seal

Machineseeker Trust Seal

What is the trust seal?

Machineseeker certifies selected sellers with the Machineseeker trust seal. Before approval, a standardized and comprehensive check is carried out by experienced Machineseeker staff.

  • What do we verify?

    Trade licence>

    Check of
    trade licence or commercial register extract

    Postal address>

    Verification of the dealer's
    postal address

    Bank details>

    Validation of the
    banking details

    Availability>

    Verification of
    accessibility     to
    main phone number

    Credit report>

    Credit report
    may not contain negative criteria

    Customer complaints>

    Buyer complaints
    can lead to withdrawal of the seal

  • What does this mean for you as buyer?

    The Machineseeker trust seal enables you, as a buyer, to identify trustworthy sellers who are very likely to do honest and righteous business, without having to do your own investigation.

    Disagreements may of course still arise during the purchasing process. Machineseeker is not liable for any legal violations by buyers or sellers active on Machineseeker.