Used Zschokke Hap 063A - 4/6 for sale (82,909)

Condition: used, Zschokke HAP 063a - 4/6 - Hydraulic press brake - Year of manufacture: 1967 Technical data - Max. bending force: 630 t - Max. oil pressure: 400 bar - Distance between uprights: 4100 mm - Max. bending length: 6000 mm - Overhang: 375 mm Prodpfxszf Hnij Af Sob - Stroke (adjustable): 0 - 500 mm - Distance between tool clamping surfaces: 300 - 800 mm Hydraulic pumps: - Main pumps: 2 x 22 kW - Delivery rate at idle: 2 x 153 l/min - Delivery rate at full load: 2 x 33 l/min - Control pump: 0.75 kW Installation: - Footprint (W x D): 6960 x 3250 mm - Height above ground: 4100 mm - Undercarriage, front: 2200 mm - Undercarriage, rear: 600 mm - Operating voltage: 3 x 400 V / 50 Hz - Machine weight: 51000 kg

Condition: used, Year of construction: 2023, functionality: fully functional, OMEGA ALLPRO 90 (2023 model) - FOLDERF-GLUER Psdpfxjzlqzgo Af Sjrb - Microbox device - Servo motors on the feeder and stacker - Remote control - Left and right-hand side-register sections - Retractable center carrier in the final folding section - Third carrier in PF1 and PF2 - Camera at the feeder to monitor the delivery section entry - Motorized carriers with positioning readout - Electronic servo system for 4- and 6-corner boxes - Pneumatic aligner for micro-flute crash-lock bottom boxes - eWON Flexy for OPC UA data sharing - Air-assisted folding system for crash-lock bottoms - Safety pull-cords - ERO cold glue system (3 guns + side glue wheel with reservoir)

Condition: used, Year of construction: 2016, functionality: fully functional, type of input current: three-phase, Omega 130 folder-gluer - 4- 6- corner - ALLPRO 130 (2016 model) - Camera at the feeder to monitor the entry to the delivery section - Vacuum feeder - Servo-driven feeder - Left and right side-register sections - Remote control - Motorized transport belts - Motorized upper carriers for heavy materials - Electronic servo system for 4- and 6-corner boxes - Pneumatic aligner for micro-flute crash-lock bottom boxes - eWON Flexy for OPC UA data sharing - Safety pull-cords - LAMBERTONI hot-melt gluing system (2 guns) + side disc with cold glue pot Predpfxszlqwzo Af Sob - Option to install a ZATOR cold-glue system (4 guns) without pump and encoder

Condition: good (used), Year of construction: 2005, machine/vehicle number: 7053055966, functionality: fully functional, power: 15 kW (20.39 HP), input voltage: 400 V, input current: 30 A, pressing force: 160 t, stroke length: 175 mm, table length: 4,050 mm, oil tank capacity: 150 l, total length: 5,000 mm, total width: 2,170 mm, total height: 2,800 mm, overall weight: 11,620 kg, Equipment: CE marking, documentation/manual, safety light barrier, The press brake would be available starting in October/November. Please feel free to contact us if you require any further information. Pedezc H Apopfx Af Ssrb

Condition: like new (used), Year of construction: 2020, Technical data: Working width: 2050 mm Max. bending capacity (mild steel St40): 6.0 mm Max. pre-bending (mild steel St40): 4.0 mm Top roll diameter: 170 mm Side lower roll diameter: 170 mm Central lower roll diameter: 145 mm Cone bending device Podpfx Afoyzc Iaj Sjrb Hardened rolls Working height: 800 mm Mobile control panel Hydraulic drop-end bearing CE marking Motor power: 2.5 kW Dimensions (L x W x H): approx. 3600 x 1200 x 1200 mm Net weight: approx. 3 tonnes Condition: Very good, almost as-new condition, very little used The seller is not liable for typographical or data transmission errors. The machine's appearance, technology and wear are age-appropriate; used machines are sold without any warranty.

Condition: good (used), functionality: fully functional, Year of construction: 2012, Motorized Swivel Bending Machine Mfg. SCHRÖDER Type: MAK 4 EVO 3200/6.0 UD Year: 2012 Technical Data Manufacturer: SCHRÖDER Type: MAK 4 EVO 3200/6 UD Year of manufacture: 2012 Working length: 3200 mm Capacity: 6 mm Upper die stroke: 850 mm Upper die geometry: 180° Bending center adjustment: 100 mm Dimensions: approx. L 6.45 x W 2.65 x H 2.75 m Machine weight: approx. 20.6 t Accessory weight: approx. 3.4 t Equipment - Up’n Down bending die, automatically controlled by POS 3000 - Upper die tool clamping, hydraulic - Bending die tool clamping, hydraulic - Motorized central crowning - Motorized bending die adjustment, program-controlled - Bending center optimization via bending center adjustment - Foot switch - Protection of operation from the rear, controlled by a light curtain and safety PLC - Safety package EVOLUTION UD with tool changer incl. safety fence - Speed optimizer Z-axis drive (max. axis speed: 120 mm/s) Control system: POS 3000-3D graphic control View of product and machine in 3D – display Prjdpjzrvdgofx Af Sob Radius-Step-Bending function Stop system Positioning stop 10 - 3400 mm in U-shape with 4 sectors (850/1700/2550/3400), Panel for individual positioning of the control, pneumatic lowering of the stop fingers, steel balls in the support table. Angle stop left and right 1500 mm. The support plates are divided and can be removed individually to create the necessary space for existing counter-bends. - 2 pneumatically lowerable angle stops mounted on the frame - Front stop function of the bending die for accommodating bending rail finger segments incl. 2 finger segments matching the bending rail Fully automatic tool changer Tool changing portal for upper die tools with hydraulic tool clamping (total 7 axes) for maximum upper die tool height of 400 mm, two asynchronously movable tool changers each with three gripping units Upper die tool Tools WZS 2000, approx. 1000 N/mm2 tensile strength • Tool set for automatic tool changer, upper die Goosefoot set h= 180 mm incl. corner pieces left and right. Bending die tools Tool system for the bending die WZS 3000, approx. 1000 N/mm2 tensile strength Bending rail "A", segmented, stepped, b= 15 mm, h= 101 mm No. 1 - L = 2 x 25, 30, 35, 40, 45, 50 = 225 mm No. 2 - L = 14 x 200 mm Bending rail "A", segmented, stepped, b= 20 mm, h= 101 mm No. 1 - L = 2 x 25, 30, 35, 40, 45, 50 = 225 mm No. 2 - L = 14 x 200 mm 2 finger segments for front stop matching bending rail b= 20 mm •Bending rail "A", segmented, b= 30 mm h= 101 mm No. 1 - L = 2 x 25, 30, 35, 40, 45, 50 = 225 mm No. 2 - L = 14 x 200 mm 2 finger segments for front stop matching bending rail b= 30 mm Lower die tools Lower die rail with recesses segmented, same radius as upper die tool b= 117 mm h= 40 mm Total length 3.240 mm, divided into 4 x 500, 2 x 620 mm All information is without guarantee. A demonstration under power is possible at any time by arrangement.

Condition: ready for operation (used), Year of construction: 2003, pressure 160 t chamfer lenght 4100 mm distance between columns 3100 mm dayligth 370 mm stroke of upper beam 200 mm throat 500 mm ajustment speed 100 mm/sec working feed 9.0 mm/sec return speed 86.0 mm/sec work height max. ca. 900 mm back stop - adjustable max. 500 mm Control CYBELEC oil volume 150 l total power requirement 15.0 kW weight 12000 kg range L-W-H 5100 x 2100 x 2750 mm Original price ~ 85.000 Euro Predpfx Afozrzt Hs Seb From a maintenance workshop Well-maintained condition (!!) Includes optional equipment - in checked conditions - machinevideo - ?v=pleltYCkXDQ Equipment: - Electro-hydraulic CNC press brake - With DELEM CNC control unit * Swiveling control panel (front right) * Tool & program library * Simple CNC programming - CNC-controlled axes: Y1 + Y2 + X + R + CNC crowning - CNC motorized backgauge (X-axis) * With 4x manually adjustable stop fingers (Z-axis) - CNC motorized height adjustment (R-axis) - WILA CNC bed crowning system - WILA electro-hydraulic upper tool clamping * Incl. sectionalized set of 28° acute-angle punches * Incl. WILA hydraulic power unit - WILA manual lower tool clamping * Incl. die adapter rail (width 77 mm) * Incl. WILA tool holder (width 13 mm) - 2x sliding front support arms - Side safety guards (swiveling doors) - Rear safety guard (swiveling door) - 1x movable foot pedal - Operating manual

Condition: used, functionality: unexamined, Year of construction: 1979, Various used housing parts for SBM-Vöest 10/6/4 Export Pedpfx Asxv U S Rof Ssrb

Condition: ready for operation (used), Year of construction: 2006, GUK folding machine FA 50/6 FA 52/4, year of manufacture 2006, equipped as follows: – Flat pile feeder FA 50 – 1st station FA 50 with 6 folding pockets, double pre-mounted knife shaft, top segment rollers, HHS cold glue 1 head, HHS hot glue with 2 heads, and transfer table. – 2nd station FA 52 with 4 folding pockets and transfer table, hydraulically height-lockable. – Knife shaft station SM 52 with 4 knife shafts, hydraulically height-adjustable. – Shingle delivery SM 52 – Vacuum/blast air pump – Window folding pocket – Various spare parts Prsdox Enduopfx Af Seb

Condition: excellent (used), Technical specifications: Retrofit in 2026 Working length: 2550 mm Max. bending capacity: 6.0 mm Bending allowance: 4.0 mm Diameter of upper roller: 200 mm Diameter of lower roller: 180 mm Hydraulic folding bearing Taper bending device Control panel with digital display Motor power: 5.5 kW Dimensions (length x width x height): approx. 3600 x 1150 x 1250 mm Prjdpszbcwmsfx Af Seb Weight: approx. 4.5 tons Condition: Very good, retrofit in 2026 The seller is not liable for typographical or data transmission errors. The machine's appearance, technology, and wear correspond to its age; used machines are sold without any warranty.

Condition: like new (used), Year of construction: 2017, functionality: fully functional, input voltage: 380 V, Equipment: documentation/manual, M&R RADICURE D 36/6-4R little used, like new Prjdowaa Tdspfx Af Sob

Condition: ready for operation (used), Machine in good operating condition Prjdpfxsy Rnnqe Af Sob

Condition: excellent (used), Offer includes: Ti52 with 6 pockets, 2nd station with 4 pockets, Tremat feeder, very good condition, year of manufacture 2009, including SAK-52 stacking device, VFZ52 available as an option. Pjdjzmp Nrspfx Af Serb

Condition: ready for operation (used), Round pile feeder MC Digital control 1st unit 6 plates 2nd unit 4 plates Pedpfx Aoq Ik Ruof Ssrb A76 stream delivery

Condition: used, Year of construction: 2004, machine/vehicle number: IntNr231232, Hermle C600 U, year of manufacture 2004 Spindle new, with commissioning report Control system: - Heidenhain iTNC 530 - Control system operating hours: 68026 - Machine operating hours: 81237 - Spindle operating hours: 12429 Spindle: - Speed: 16,000 rpm - Tool holder: SK-40 - 30 tool magazine positions Equipment: - Rigid clamping table - NC rotary table, 4th axis (iTNC) - Coolant system - Chip conveyor: none - Electronic handwheel (iTNC) - Tool breakage monitoring - Chip flushing nozzle - Foot switch for clamping/unclamping - Hydraulic unit for clamping/unclamping Travel paths: - X-axis (longitudinal): 600 mm - Y-axis (transverse): 450 mm - Z-axis (vertical): 450 mm Table: - Clamping area: 800 mm x 465 mm - Maximum table load: 250 kg Prsdpez E Rb Dsfx Af Ssb Axes: - Axis rapid traverse: 35 m/min - Acceleration: 5 m/s² - Measuring system X/Y/Z: 0.1 µm Dimensions & Weight: - Machine weight: approx. 6.8 t - Machine dimensions (W x D x H): 2.5 m x 2.4 m x 2.43 m The machine can be inspected under power by appointment. Subject to changes, errors in technical data and specifications, and prior sale!

Condition: used, Falzmaschine / Folding machine Heidelberg TD66/6-4-4 Pedpfx Afjzzyg Rj Sorb Year 1998 Round Pile Feeder  Folding Type 6 - 4 - 2 buckles Press Delivery Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Year of construction: 1987, condition: ready for operation (used), 5 metalworking machines from various manufacturers are offered. 1) Column drilling machine VEB BS16, year of manufacture: 1960, weight: 110kg. 2) Milling machine Fritz Werner. 3) Pillar drilling machine Infratirea 4GC02502, year of manufacture: 1987. 4) Pillar drilling machine Infratirea, year of manufacture: 1987. 5) Radial drilling machine Tianjin No. 4 Z3063×20. Prodpfx Aezqfxdof Sjb

Condition: good (used), Year of construction: 2000, working width: 900 mm, total width: 1,800 mm, total length: 12,000 mm, total height: 3,550 mm, overall weight: 8,000 kg, For sale: Konig combi bread line 8/7/6/4 rows Includes: - TRO 240 hopper with oiling system - Konig Industrie Rex head machine Model A - Spreading conveyors - Proofing cabinet model: KGV V L Type: (900/500) K8 - V0 - (W) - R - RR900 - SCHN7/B - MO(WB) 1000 - STb8/7/4 - Stamping unit - Long roller - Seed station - Drop tables (8/7/6/4) (4 different drop tables with various belts included) - Storage trolley for the drop tables - Storage trolley for the flour sprinklers Predpfsxnb Iiex Af Sjb - Spare parts - Control cabinet - All documents and electrical diagrams Weight range: 20 to 30 grams up to 110 grams Output: 18,000 / 24,000 pcs per hour Working width: 900 mm New drum in the Industrie Rex Many spare parts such as spreading belts, etc. It is possible to inspect the line on site. We can carefully load the line onto a truck/container. Do you have comments or questions? Please feel free to contact us. Best regards, Leo Holland

Condition: good (used), Technical specifications: Pedpfx Afjwkaale Sjrb Working width: 4050 mm Max. bending capacity: 6.0 mm Max. pre-bending: 4.0 mm Top roller diameter: 210 mm Side lower roller diameter: 210 mm Middle lower roller diameter: 210 mm Conical bending device by tilting the two side rollers Hydraulic folding bearings Pivoting control panel with digital display Dimensions (length x width x height): approx. 6900 x 2300 x 1800 mm Weight: approx. 14 tons The seller is not liable for typographical or data transmission errors. The machine's appearance, technology, and wear are consistent with its age; used machines are sold without any warranty.

Condition: ready for operation (used), Year of construction: 1989, MACHINE: BOBST Domino 85-M Manufacturer: BOBST SA Model number: Domino 85-M Machine type: Folder-gluer Year manufactured: 1989 Machine Format: 850 x 800mm Technical Specifications: Convertible stock Solid up to 700 g/m2 Corrug. up to B flute Thickness 15 mm Sizes: standard boxes (blanks open) Width max 850 mm Width min 56 mm Length max 800 mm Length min 60 mm Drive System Inching speed 8 m/min Operating speed 20 - 400 m/min Crash lock bottom device Special version for 4/6 corner gluing HHS gluing system with 3 guns N. 2 gluing points disc system Belt pressing system delivery Main motor 21 kW Pedpfxex S Uuye Af Sorb Dimensions Length 14120 Width 2200 mm Weight 7000 - 10000 kg

Condition: used, Round Pile Buckle Folding machine Heidelberg Stahlfolder TD 66/6-4-4 Falzmaschine / Folding machine Heidelberg Stahlfolder TD 66/6-4-4 Baujahr / Year 1996 - Serial-No. 66748/95-225117 Rundstapelanleger / Round Pile Feeder  Arbeitsbreite / Working width max. 660mm Falztyp / Folding Type 6 - 4 - 4 Schuppenauslage / Stream delivery Pedpfey Akwrjx Af Sorb Inkl. Handbücher / Include Manuals Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Year of construction: 2024, condition: new, - 6.000mm cutting length - min. cutting length 600mm - 5 saw supports - 80 - 140 mm cutting height - 4 KW saw motor Predpfx Ajpfcgasf Sob - 1,5 KW stepless feed 10-30m/min Optional - Disposal conveyor belts

Condition: used, Year of construction: 2007, The Heidelberg Stahlfolder TH 82/6-4-2 - RFH, manufactured in 2007, is a high-quality folding machine with a size of 820 mm. Currently dismantled and located in Germany, this machine features a rotary feeder RFH-82. It includes three stations: the first station has 6 folding pockets of 82 cm with automatic pocket setting, the second station has 4 folding pockets of 66 cm with automatic pocket setting, and the third station has 2 folding pockets of 56 cm with automatic pocket setting. The machine also includes a stacking delivery SBP 66, a touchscreen monitor, and an MCT control system. The specific model is identified as TH82/6/4/2 with the machine number FH.HACO-00951. Format: 820 mm Equipment: Rotary feeder RFH-82 1.station: 6 folding pockets 82 cm Psdpfxjwnft So Af Serb Automatic pocket setting 2.station: 4 folding pockets 66 cm automatic pocket setting 3.station: 2 folding pockets 56 cm Automatic pocket setting Stacking delivery SBP-46+ MKE+VE Touchscreen-Monitor, MCT-control-system

Condition: good (used), functionality: fully functional, Opening: 620 x 350 mm Rotor-diameter x -width: 1.060 x 610 mm feed size hardrock -180 mm Predpolgzrhofx Af Seb feed size limestone -300 mm, complete with E-drive, conveyor and steel-construction

Condition: used, Year of construction: 1991, Falzmaschine / Folding Machine  Stahl TF 78/6-4-2 16 Seiten Falzmaschine / 16 pages folding machine Baujahr / Year 1991 Rundstapelanleger / Round Pile Feeder Format min. 140 x 180mm - max. 780 x 1200mm Paper weight 40-250 g/m2 Falztyp / Folding Type: 6 buckles - 4 buckles - 2 buckles Auslage / Delivery SAK 66 Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test Podpfx Afeuq Sp As Sorb