Used Zmm C 10 Tm for sale (72,543)

Condition: new, neu Bulgarien 77840 € 1471. € 760 mm 3000 mm 380 mm 132 mm 520 mm 560 mm 11 140 M 17 7,5 - 1015 1/min 150 0.039 - mm/U 0.02 - 9 mm/U 0.5 - 0 mm 60 - 1/6 Gänge/" 410 mm 150 mm 105 mm 6 MK 225 mm 15 kW 4470 kg driven by conventional transmission 3-axes digital readout quick change toolpostAmestra type Multifix with 4 holders (3 square, 1 round) 3-jaw chuck Bison3295/DIN6350, Ø 400 mm spindle dead center four way rapid traverse device foot pedal brake longitudinal stop for 1 position coolant equipment full length rear splash guard leadscrew and shaft protection safety guard for the chuck toolholder guard levelling bolts and plates quick release tailstock tailstock quill reducer mechanized movement of tailstock low voltage machine lamp operating manual machine according to "CE" FURTHER TURNING LENGTHS: turning length1.500 mm Fjdpfx Anewiq Rrj Rjpg € 63 970,00 turning length2.000 mm € 66 880,00 turning length4.000 mm € 83 740,00 turning length5.000 mm € 96 300,00 turning length6.000 mm € 109 900,00

Condition: new, neu Bulgarien 85520 € 1616.33 € 760 mm 3000 mm 380 mm 132 mm 520 mm 560 mm 11 140 M 3 7 - 42; 28 - 170; 165 - 1 U/Min 150 0.039 - mm/U 0.02 - 9 mm/U 0.5 - 0 mm 60 - 1/6 Gänge/" 410 mm 150 mm 105 mm 6 MK 225 mm 15 kW 4470 kg driven by variable speed control (3 steps) 3-axes digital readout FAGOR with CSS (constant surface speed) quick change toolpostAmestra type Multifix with 4 holders (3 square, 1 round) 3-jaw chuck Bison3295/DIN6350, Ø 400 mm spindle dead center main motor with frequency invertor four way rapid traverse device foot pedal brake longitudinal stop for 1 position coolant equipment full length rear splash guard leadscrew and shaft protection safety guard for the chuck toolholder guard levelling bolts and plates quick release tailstock tailstock quill reducer mechanized movement of tailstock low voltage machine lamp Fsdpfxoyq Sn Te An Ropg operating manual machine according to "CE" FURTHER TURNING LENGTHS: turning length 1.500 mm € 71 280,00 turning length2.000 mm € 74 190,00 turning length4.000 mm € 91 680,00 turning length5.000 mm € 104 390,00 turning length6.000 mm € 1 230,00

Condition: new, neu Bulgarien 91920 € 1737.29 € 860 mm 3000 mm 430 mm 135 mm 620 mm 560 mm 11 140 M 7 - 42; 28 - 170; 165 - 1 U/Min 150 0.039 - mm/U 0.02 - 9 mm/U 0.5 - 0 mm 60 - 1/6 Gänge/" 240 435 mm 150 mm 105 mm 6 MK 225 mm 15 kW 4650 kg driven by variable speed control (3 steps) 3-axes digital readout FAGOR with CSS (constant surface speed) quick change toolpostAmestra type Multifix with 4 holders (3 square, 1 round) 3-jaw chuck Bison3295/DIN6350, Ø 400 mm spindle dead center Fpsdpfxsyq Sm Ae An Rog main motor with frequency invertor four way rapid traverse device foot pedal brake longitudinal stop for 1 position coolant equipment full length rear splash guard leadscrew and shaft protection safety guard for the chuck toolholder guard levelling bolts and plates quick release tailstock tailstock quill reducer mechanized movement of tailstock low voltage machine lamp operating manual machine according to "CE" FURTHER TURNING LENGTHS: turning length1.500 mm € 77 680,00 turning length2.000 mm € 80 590,00 turning length4.000 mm € 98 080,00 turning length5.000 mm € 110 890,00 turning length6.000 mm € 124 730,00

Condition: new, neu ca. 4 Monate ab Auftragse Bulgarien 36070 € 688.94 € 400 mm 1000 mm 200 mm 52 mm 235 mm 320 mm 6 6 M 12 50-2.240 1/min 80 0.015 - 0.6 mm/U 0.0075 - 0.3 mm/U 40 0.25 - 7.5 mm 120 - 4 Gänge/" 0.0625 - 1.875 480 - 16 235 mm 110 mm 50 mm 4 MK 100 mm 4 kW 2750 mm 1100 mm 1600 mm 1540 kg driven by manual transmission 3-axes digital readout Fagor 40i quick change toolpostMultisuissewith4 holders (3 square, 1 round) 3-jaw chuck Bison 3204/DIN6350, Ø 200 mm spindle noseNr. 6 DIN 55027 four way rapid traverse device Fpodpfjxzuu Aox An Rsg spindle dead center coolant equipment 1 pce. flange plate for lathe chuckØ 200 mm 1 adapter sleeve full length rear splash guard leadscrew and shaft protection safety guard for the chuck toolholder guard levelling bolts and plates quick release tailstock low voltage machine lamp operating manual machine according to "CE" FURTHER TURNING LENGTH (PRICE ON REQUEST): turning length 750 mm

Condition: new, neu ca. 4 Monate ab Auftragse Bulgarien 107870 € 2038.74 € 800 mm 2000 mm 400 mm 260 mm 560 mm 560 mm 318 M 12 8 - 400 1/min 2 0.039 - mm/U 0.02 - 7.5 mm/U 76 0.5 - 0 mm 60 - 1/5 Gänge/" 0.125 - 37.5 240 - 4/5 410 mm 0 mm 105 mm 6 MK 225 mm 11 kW 6000 kg Their main purpose is to process pipes. Accordingly, this type of machines is widely used in the oil industry. Oil country lathes have large capabilities of processing inner and outer cylindrical and conical threads on pipes with large diameters. The clamping of the pipes with two universals and stands allows the processing of long pipes. These lathes are suitable for producing elements and equipment for the oil industry, as well as for maintaining such facilities. Drive via gearbox Electrodynamic brake 3-axis digital display Fagor Quick-change tool holder Amestra type C, system like Multifix including 4 holders (3x rectangular, 1 round) 2 pcs. 3-jaw chuck Bison 3295 Dm. 500 mm on both sides of the spindle, gripping range 120-350 mm. Option: hard top jaws with gripping range 120-500 mm 2 pcs. steady rests on supports Dm. 60 - 260 mm with rollers Rapid traverses (4) Longitudinal stop for one position Taper turning device Fsdpswirghjfx An Rjpg Coolant device Full length rear splash guard Lead and feed spindle cover Lathe chuck protection Tool holder protection Leveling bolts and plates Tailstock Reducing sleeve for the tailstock sleeve Mechanical movement of the tailstock with handwheel Low voltage machine light Operating instructions Equipment according to "CE" regulations Further models with spindle bore from 5 to 358 mm, centre distances from 1000 to 6000 mm and with turning diameters from 730 to 1020 mm are available on request.

Condition: new, neu ca. 4 Monate ab Auftragse Bulgarien 107970 € 2040.63 € 800 mm 2000 mm 400 mm 3 mm 560 mm 560 mm 318 M 12 8 - 400 1/min 2 0.039 - mm/U 0.02 - 7.5 mm/U 76 0.5 - 0 mm 60 - 1/5 Gänge/" 0.125 - 37.5 240 - 4/5 410 mm 0 mm 105 mm 6 MK 225 mm 11 kW 6100 kg Their main purpose is to process pipes. Accordingly, this type of machines is widely used in the oil industry. Oil country lathes have large capabilities of processing inner and outer cylindrical and conical threads on pipes with large diameters. The clamping of the pipes with two universals and stands allows the processing of long pipes. These lathes are suitable for producing elements and equipment for the oil industry, as well as for maintaining such facilities. Drive via gearbox Electrodynamic brake 3-axis digital display Fagor Quick-change tool holder Amestra type C, system like Multifix including 4 holders (3x rectangular, 1 round) 2 pcs. 3-jaw chuck Bison 3295 Dm. 500 mm on both sides of the spindle, gripping range 250-380 mm. Option: hard top jaws with gripping range 250-500 mm 2 pcs. steady rests on supports Dm. 120 - 320 mm with rollers Rapid traverses (4) Longitudinal stop for one position Taper turning device Coolant device Full length rear splash guard Lead and feed spindle cover Lathe chuck protection Tool holder protection Leveling bolts and plates Tailstock Fpodpfx Ajwiq E Aen Rjg Reducing sleeve for the tailstock sleeve Mechanical movement of the tailstock with handwheel Low voltage machine light Operating instructions Equipment according to "CE" regulations Further models with spindle bore from 5 to 358 mm, centre distances from 1000 to 6000 mm and with turning diameters from 730 to 1020 mm are available on request.

Condition: new, neu ca. 4 Monate ab Auftragse Bulgarien 131720 € 2489.51 € 1020 mm 2000 mm 510 mm 358 mm 770 mm 560 mm 361 M 12 6,3 - 3 1/min 2 0.039 - mm/U Fjdpfxowiq Drs An Rspg 0.02 - 7.5 mm/U 76 0.5 - 0 mm 60 - 1/5 Gänge/" 0.125 - 37.5 240 - 4/5 505 mm 270 mm 105 mm 6 MK 225 mm 18,5 kW 6400 kg Their main purpose is to process pipes. Accordingly, this type of machines is widely used in the oil industry. Oil country lathes have large capabilities of processing inner and outer cylindrical and conical threads on pipes with large diameters. The clamping of the pipes with two universals and stands allows the processing of long pipes. These lathes are suitable for producing elements and equipment for the oil industry, as well as for maintaining such facilities. Drive via gearbox Electrodynamic brake 3-axis digital display Fagor Quick-change tool holder Amestra type D1, system like Multifix including 4 holders (3x rectangular, 1 round) 2 pcs. 3-jaw chuck Bison 3295 Dm. 660 mm on both sides of the spindle, max. 250 rpm,gripping range 5-400 mm. Option: hard top special jaws (outside only), gripping range 80-400 mm 2 pcs. steady rests on supports Dm. 160 - 360 mm with rollers Rapid traverses (4) Longitudinal stop for one position Taper turning device Coolant device Full length rear splash guard Lead and feed spindle cover Lathe chuck protection Tool holder protection Leveling bolts and plates Tailstock Reducing sleeve for the tailstock sleeve Mechanical movement of the tailstock with handwheel Low voltage machine light Operating instructions Equipment according to "CE" regulations Further models with spindle bore from 5 to 358 mm, centre distances from 1000 to 6000 mm and with turning diameters from 730 to 1020 mm are available on request.

Condition: new, neu ca. 4 Monate ab Auftragse Bulgarien 82740 € 1563.79 € 860 mm 3000 mm 430 mm 132 mm 620 mm 560 mm 11 140 M 17 7,5 - 1015 1/min 150 0.039 - mm/U 0.02 - 9 mm/U 0.5 - 0 mm 60 - 1/6 Gänge/" 240 - 2/3 435 mm 150 mm 105 mm 6 MK 225 mm 15 kW 3470 mm Fedpewiq Rxjfx An Rspg 1700 mm 1730 mm 4650 kg driven by conventional transmission 3-axes digital readout quick change toolpostAmestra type Multifix with 4 holders (3 square, 1 round) 3-jaw chuck Bison3295/DIN6350, Ø 400 mm spindle dead center four way rapid traverse device foot pedal brake longitudinal stop for 1 position coolant equipment full length rear splash guard leadscrew and shaft protection safety guard for the chuck toolholder guard levelling bolts and plates quick release tailstock tailstock quill reducer mechanized movement of tailstock low voltage machine lamp operating manual machine according to "CE" FURTHER TURNING LENGTHS: turning length1.500 mm € 68 870,00 turning length2.000 mm € 71 780,00 turning length4.000 mm € 88 640,00 turning length5.000 mm € 101 200,00 turning length6.000 mm € 114 800,00

Condition: used, Year of construction: 2020, gebraucht Fedpfxowirdtj An Rjpg 2020 1658 prompt, Zwischenverkauf v Bulgarien 26500 € 1 22600 € 400 mm 1000 mm 200 mm 52 mm 235 mm 320 mm 6 6 M 12 50-2.240 1/min 80 0.015 - 0.6 mm/U 0.0075 - 0.3 mm/U 40 0.25 - 7.5 mm 120 - 4 Gänge/" 0.0625 - 1.875 235 mm 110 mm 50 mm 4 MK 100 mm 4 kW 2750 mm 1100 mm 1600 mm 1540 kg This machine is used in our workshop for repair work, therefore it has only been used very little so far. (New price € 36,070.00) driven by manual transmission 3-axes digital readout Fagor 40i quick change toolpostMultifix Type Bwith4 holders (3 square, 1 round) 3-jaw chuck Bison 3204/DIN6350, Ø 200 mm spindle noseNr. 6 DIN 55027 four way rapid traverse device spindle dead center coolant equipment 1 pce. flange plate for lathe chuckØ 200 mm 1 adapter sleeve full length rear splash guard leadscrew and shaft protection safety guard for the chuck toolholder guard levelling bolts and plates quick release tailstock low voltage machine lamp operating manual machine according to "CE"

Condition: new, turning diameter 760 mm turning length 3000 mm swing diameter over bed slide 520 mm centre height 380 mm reus 17 (7,5 - 1015) U/min tail stock MK6 quill stroke 225 mm Fodpfx Ansqv Iw Ts Ropg diameter of quill 105 mm spindle bore 132 mm feed längs 0,039 - mm/min feed quer 0,02 - 9 mm/min total power requirement 15 kW weight of the machine ca. 4700 kg dimensions of the machine ca. 4900 x 1650 x 1650 mm - Coolant device - Machine light - Chip back wall - Spindle protection - Lathe chuck protection - Tool holder protection - Interchangeable gears *Special equipment - 3-jaw chuck Ø 250 mm type 3204/ DIN6350, BISON - MULTIFIX quick-change holder type B, including 4 tool holders - 3-axis digital display DRO Newall - Foot pedal with brake function CE

Condition: new, bending length: 1050sheet thickness: 1upper roll diameter: 56 Technical specifications: - Cast iron body - By manuel or motorised (optional) bending - Opening top roll to side after bending for taking out the material easily - Cone bending device - Movement of the back and bottom rolls up and down manually with hand wheel - Portable control panel in order to control material from required  locations with foot pedal  Fpjdpfed Ab Uxox An Rog - In acccordance with CE norms. Options: - Back roll with motor  - Digital readout for displaying position of the backroll - Body cover - Hardened rolls EURO 336,-- We have many references!

Condition: good (used), Year of construction: 1998, ZMM Sliven - CU 1000 steady rest Fedpfox Ttfaex An Rjpg

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, turning diameter over cross slide: 690 mm, spindle bore: 155 mm, turning diameter: 1,090 mm, center height: 500 mm, center width: 700 mm, turning length: 3,000 mm, Parallel Lathe ZMM-SIBIMEX CU 1000/3000 Year of manufacture: 2007 CE certified Excellent overall condition Centre height: 500 mm Maximum turning length: 3000 mm Swing over bed: 1090 mm Swing over carriage: 690 mm Swing in gap: 1250 mm Spindle bore: 155 mm Bed width: 700 mm Motor power: 22 kW Approx. weight: 8000 kg Number of speeds: 24 Spindle speed range: 6.3 - 1250 rpm Speed range Machine complete with fixed and travelling steady rests Self-centering chuck 4-jaw faceplate Powered tailstock Fpsdpsylazwjfx An Reg Elbo axis DRO Rapid traverse on feeds

Condition: new, neu Bulgarien 127060 € 2401.43 € 1090 mm 3000 mm 500 mm 155 mm 690 mm 700 mm 15 160 M 4 3,7 - 15,6; 14,7 - 62; 58 U/Min 160 0.032 - 38.9 mm/U 0.016 - 19.45 mm/U 0.5 - 480 mm 60 - 1/16 Gänge/" 240 525 mm 270 mm 125 mm 6 MK 260 mm 30 kW 8050 kg driven by variable speed control (4 steps) 3-axes digital readout FAGOR with CSS (constant surface speed) quick change toolpostAmestra with 4 holders (3 square, 1 round) 3-jaw chuck Bison 3204/DIN6350, Ø 500 mm spindle dead center coolant equipment full length rear splash guard leadscrew and shaft protection safety guard for the chuck toolholder guard levelling bolts and plates Fpsdpfx Aeyq Sr Sen Rjg tailstock quill reducer electric motor movement of tailstock low voltage machine lamp operating manual machine according to "CE" FURTHER TURNING LENGTHS: turning length1.500 mm € 112 010,00 turning length4.000 mm € 135 240,00 turning length5.000 mm € 146 580,00 turning length6.000 mm € 163 380,00

Condition: good (used), Year of construction: 2011, functionality: fully functional, turning diameter over cross slide: 700 mm, turning length: 6,000 mm, spindle motor power: 30 W, The lathe is in good technical condition, connected and ready for testing. It features digital readout, faceplate, and steadies. Specifications: Swing diameter over bed: 1,090 mm Distance between centers: 6,000 mm Swing diameter over cross slide: 700 mm Main drive motor power: 30 kW Fpodpfx Aex A S Sbsn Rog Dimensions (L x W x H): 8,200 x 1,800 x 1,855 mm Machine weight: 11,000 kg

Condition: new, turning diameter 325 mm turning length 1000 mm swing diameter over bed slide 250 mm Swingdiameter in the bed bridge 440 mm reus 12 (85-2000) U/min tail stock MK 3 quill stroke 100 mm diameter of quill 40 mm spindle taper DIN 55027 Nr. 5 spindle bore 32 mm feed längs 0,006 - 1,77 m/min feed quer 0,003 - 0,885 m/min total power requirement 2,2 kW weight of the machine ca. 770 kg dimensions of the machine ca. 2150 x 950 x 1350 mm Furnishing: - Cooling device - Machine light - chip rear wall - Spindle protection - Lathe chuck protection - Tool holder protection - Foot pedal with braking function CE - Interchangeable gears Fpodpetycpajfx An Reg *incl. Optional equipment - 3-jaw chuck Ø 160 mm type 3204/ DIN6350, BISON - MULTIFIX quick-change holder type A, incl. 4 tool holders - 2-axis digital display DRO Newall

Condition: used, Year of construction: 2004, turning length 750 mm turning diameter 310 mm turning diameter over slide rest 175 mm spindle bore 32,0 mm tailstock quill taper MT 3 MK turning speeds 85 - 2200 U/min bed width 200 mm total power requirement 2.2 kW weight of the machine ca. 710 kg range L-W-H 1884 x 717 x 1262 mm New price ~ 23.000 euros from a training workshop (!!) Furnishing: - Spindle speed continuously adjustable in 2x switching stages - "TOS" 3-jaw lathe chuck Ø 160 mm, with spare jaws & chuck key - "NEWALL" digital display, front left - MULTIFIX steel holder with inserts - Movable tailstock - live center, incl. quick-action drill chuck - digital speed display - Change gears - Foot/spindle brake * all technical data: - Turning diameter over bed 310 mm - Distance between centers 750 mm - Spindle bore 32 mm - Turning diameter over cross slide 175 mm - bed width 200 mm - Spindle mount / DIN55027 5 Fsdpfx Aexaa D Ton Rjpg - Spindle taper 4.5 M - Spindle speed infinitely variable in switching stages 2 - Spindle speed stepless 85-405; 470-2200 rpm - Number of feeds 48 - Metric thread range 0.1 - 28 mm - Thread module range 0.1 - 1.75 - Thread DP range 4 - 70 - Adjustment range cross slide 150 mm - Adjustment range top slide 95 mm - Tailstock quill diameter 40 mm - Tailstock recording 3 MK - Tailstock quill travel 100 mm - Motor power 2.2 kW - Weight 710 kg

Condition: new, neu Bulgarien 115600 € 2184.84 € 1090 mm 3000 mm 500 mm 155 mm 690 mm Fpodpfx Anowiqv Uj Rsg 700 mm 15 160 M 24 160 0.032 - 38.9 mm/U 0.016 - 19.45 mm/U 0.5 - 480 mm 60 - 1/16 Gänge/" 525 mm 270 mm 125 mm 6 MK 260 mm 22 kW 7500 kg driven by manual transmission 3-axes digital readout quick change toolpostAmestra with 4 holders (3 square, 1 round) 3-jaw chuck Bison 3204/DIN6350, Ø 500 mm spindle dead center coolant equipment full length rear splash guard leadscrew and shaft protection safety guard for the chuck toolholder guard levelling bolts and plates tailstock quill reducer electric motor movement of tailstock low voltage machine lamp operating manual machine according to "CE" FURTHER TURNING LENGTHS turning length1.500 mm € 101 220,00 turning length2.000 mm € 104 720,00 turning length4.000 mm € 123 610,00 turning length5.000 mm € 134 700,00 turning length6.000 mm € 151 230,00

Condition: excellent (used), Year of construction: 2007, Technical data: Centre height: 500 mm Swing diameter: 1090 mm Swing diameter over cross slide: 690 mm Centre distance: 1500 mm Spindle speeds: 6 – 1250 rpm Spindle bore: 155 mm Digital position display: SONY Bed width: 700 mm Tool holder: MT 6 Fpjdpfx Ajxlgmfsn Reg Motor power: 30 kW CE marking Dimensions (L x W x H): approx. 3500 x 1750 x 1900 mm Weight: approx. 7.5 t Accessories: Central lubrication Coolant system Rear splash guard 3-jaw chuck 500 mm 4-jaw chuck 800 mm The seller is not liable for typographical or data transmission errors. The machine’s condition regarding appearance, technical characteristics, and wear is in accordance with its age; used machines are sold without any warranty.

Condition: good (used), Year of construction: 1973, Centre height: 150 mm Centre distance: 760 mm Max. turning diameter over bed/cross slide: 300/165 mm Spindle bore: 32 mm Spindle mount, short taper per DIN 55027: Size 5 Quill taper of tailstock: MT 3 12 spindle speeds: 85 - 2000 rpm 48 feeds: 0.006 - 1.77 mm 48 metric thread pitches: 0.1 - 28 mm 58 inch threads: 75 - 2.5 TPI Fedpjyu R Nkjfx An Repg 19 module threads: 0.1 - 1.75 module 19 diametral pitch threads: 70 - 4 DP Electric drive: 220/380 V, 1400 rpm, 2.2 kW Weight: 800 kg Required space: 1800 x 770 x 1300 mm

Condition: ready for operation (used), TFT monitor/screen for Deckel, Philips and Maho 432/10, serial number: 153197, used, in good condition, 100% functional, scope of delivery as shown in the photos. Fpodpfxey Ntbto An Reg

Condition: ready for operation (used), Indramat MAC 090C-0-KD-2-C/110-A-0/S001 permanent magnet three-phase servo motor, serial no. as per photo, professionally completely overhauled and tested with 12 months warranty, 100% functional, scope of delivery as per photos,The agreed sales discounts do not apply to this item. Please ask for price separately! Fpodpfx Anei D Ihuj Rjg

Condition: ready for operation (used), Siemens 6FC5203-0AB11-0AA2 Flat panel OP031 Version C , serial no. according to photo, used, professionally completely overhauled and tested with 12 months warranty, 100% functional, scope of delivery according to photos Fjdsi Edy Nepfx An Ropg

Condition: ready for operation (used), Indramat MAC093B-0-GS-4-C/110-B-0/WI522LV permanent magnet motor SN:MAC093-24699, professionally completely overhauled and tested with 12 months warranty, 100% functional, scope of delivery as per photos, the agreed sales discounts do not apply to this article. Please ask for price separately! Fjdpfei D Ipbex An Ropg

Condition: ready for operation (used), Indramat MAC 090C-0-KD-2-C/110-B-0/S001 permanent magnet three-phase servo motor, serial no. according to photo, used, strong traces of use, 100% functional, scope of delivery according to photos Fpsdpfx Aei D Ih Ajn Rog