Used Wurster & Dietz Frame Saw With Oscillating Frame for sale (15,133)

Condition: good (used), functionality: fully functional, Passage height 160 mm Passage width 800 mm Feed speed steplessly adjustable 0–70 m/min Hydraulic width adjustment with pneumatic cylinder, electrically adjustable, Drive motor Siemens 50 kW with V-belt drive, Wood infeed and outfeed table, Lhodpfxjwx Hrws Abzel The machine has been technically inspected and is in working condition.

Condition: used, Year of construction: 1976, Esterer LSH Sash Saw 1976 - Automatic cantilever adjustment - Hydraulic roller lifting - Swing frame - With templates - With magnetic holder - With Jansen saw tensioner - With Esterer Arta-C riving knife - With drive motor - With saw blades - With intermediate gear Clearance width: 650 mm Clearance height: 90–620 mm Stroke: 500 mm Feed speed: 0–8 m/min Feed power: 3.5 kW Pulleys: 900 mm Total weight: 5.4 t Fits the foundation of the Esterer LD65 sash saw. Has been stationary for around 15 years. Dismantled and stored approx. 3 years ago. Lhjdpoyhduyjfx Abzel Annual cut approximately 3,000 solid cubic meters. Very good condition – immediately available – fully functional Location: Austria, near Graz

Condition: used, Year of construction: 1977, Wurster and Dietz GDZ 600 GES Year of construction 1977 Passage: 71 cm stroke: 600 mm with swing frame with water-cooled guides with hydraulic saw clamp Jansen with riving knife with saw blades with templates with fence immediately available Lhjdpfeqpdi Usx Abzjl Location: Austria, near Klagenfurt

Year of construction: 1979, operating hours: 10,968 h, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: Werk-Nr. 8725, INFORMATION REGARDING SALES AND CONTRACT CONDITIONS: MACHINE CONDITION: Lsdpfx Abezgr Iqjzohl This ESTERER frame saw, model LSH 65, was in impeccable operational use until three years ago and remains serviceable. The equipment includes both a stationary control panel in front of the saw frame and a mobile control panel on the tensioning carriage. A hydraulic tensioning device for adjusting the saw blades in horizontal and vertical directions is mounted on the frame. The electric motor drive with gearbox is included in the offer. HANDOVER AND PRICE: Handover will take place after full payment of the purchase price. The price is ex foundation and is payable on-site directly to the seller after conclusion of the contract and prior to dismantling. WARRANTY: The seller assumes no warranty, neither before nor after handover of the machine – sold as seen. The buyer has no right of withdrawal. DISMANTLING: Complete dismantling, including lifting gear, tools, and transportation, is the responsibility of the buyer. Handover of the machine shall take place on-site. Any damage caused to the building during dismantling will be repaired by the buyer or charged separately. The purchase transaction will be mutually confirmed by means of a sales contract.

Condition: excellent (used), functionality: fully functional, Wurster & Dietz roller conveyor with remover, roller width 2 m, with take-off table for boards, under-table crosscut saw with roller tables Lsdpsyx U E Sjfx Abzohl

Condition: excellent (used), functionality: fully functional, Well-maintained W&D gate-type press, model GXW 71 VH. Frame width 710 x 710 mm. Stroke 500 mm. Infinitely variable hydraulic feed. Hydraulic cylinder lift with adjustable cylinder pressure. Drive. Saw attachment. Electric remote control. Clamping carriage and wedge with electric adjustment. Lsdjzz Iu Aepfx Abzohl From a small operation. Also interesting as a source of spare parts.

Condition: used, Frame Saw Esterer LSH Year of Manufacture: 1968 Clearance: 65 cm 500 mm stroke Oscillating frame Automatic overhang adjustment Hydraulic roller lifting With splitter wedge With drive motor With gear transmission With saw blades With hydraulic saw tensioner With suspension system Lhedpow Dn S Ajfx Abzsl With templates With log carriage Weiss HdT-L, Year 1996 (can also be sold separately) The machine has been out of operation for quite some time and should be thoroughly checked and overhauled. Location: Austria, near 8700 Leoben

Condition: good (used), WD creel type GXW 71, with spherical roller bearing in the main shaft. Suitable for all base plates of GXV and GXW creels. Lsdpfsuql Ilex Abzohl Fully hydraulic. With hydraulic saw tensioner. Ideal as a replacement sash gang or swing replacement.

Condition: new, 1 brand new horizontal bandsaw machine with a swiveling frame and double miter capability (R/L) Manufacturer: HUVEMA / BEKA-MAK, Origin Turkey Model: HU 230 DG-4 Cutting range: Round 230 mm Rectangular 320 x 130 mm Square 230 mm -45° Round 180 mm -45° Flat 230 x 100 mm -45° Square 150 mm +45° Round 210 mm +45° Flat 230 x 160 mm +45° Square 180 mm +60° Round 120 mm +60° Flat 120 x 100 mm +60° Square 100 mm Working height 760 mm Motor power, main drive 1.0 - 1.3 kW, 400 V, 50 Hz Motor power, coolant pump 0.12 kW 2 speeds 35 / 70 m/min Saw blade dimensions 2730 x 27 x 0.9 mm Dimensions L x W x H 1350 x 700 x 1300 mm Weight 415 kg Accessories / Special features: • Double miter capability through a swiveling frame o The material to be cut remains straight in space! o No need to turn the material for miter cuts! o High efficiency with enormous time savings! • Adjustable precision stops 0°, 45° and 60° on the left and 45° on the right • Interchangeable work table • Quick-release vise, can be shifted to the left and right • Adjustable length stop 500 mm for cuts of the same length Lhjdefk Ew Eopfx Abzel • The lowering of the saw arm is regulated steplessly by a hydraulic cycle • Coolant system • Chip brush • Swiveling control panel • Electric safety switch for blade tension and saw blade guard • Automatic shutdown at the end of the cut • Emergency stop switch • CE compliant Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund-Wambel / Germany

Condition: ready for operation (used), Wurster & Dietz round timber intake station with singulator and block chain conveyor with ejector. Lhjdpfoyxrtaex Abzel

Condition: good (used), functionality: fully functional, Esterer spreading jaw AVER. Equipped with electrically driven spreading rollers. Also adjustable manually. Lhodpfx Ajz D Exujbzsl Electrical adjustment of the spreading jaws, also asymmetrical. Pressure rollers can be hydraulically extended and retracted. Heavy-duty spreading jaw blades and spring flaps.

Condition: ready for operation (used), functionality: fully functional, Wurster & Dietz Trimming and Re-Cutting Machine Type FR7 with in-machine adjustment Star-delta soft start Feed roller table Single-blade spiral roller chip separator Chips discharged into a trolley Ljdpfx Abov I D Shszohl Main product on the feed roller table

Condition: excellent (used), Original spacer rings 145 Ø x 86 Ø with 1 groove 16.5 mm in various widths, 1 used saw shaft 60 mm Ø with 2 wedges 16 mm wide including 1 sliding bush 120 mm effective clamping length with left-hand threaded clamping nut suitable for right-hand machine and bearing bush for front flap Lodowaiaaepfx Abzshl

Condition: good (used), For sale: Wood processing line: - FOD DTRA 63 bottom-driven frame saw - 2 units - Log infeed conveyors - cross and longitudinal - Conveyors - Trolleys - Rails Machines are operational and in working condition Basic technical data for the FOD sawmill: Horizontal clearance mm 650 Saw frame stroke mm 520 Clearance between rollers mm 80-570 Minimum log diameter mm 100 Maximum log diameter mm 550 Minimum log length mm 2200 Main shaft rotation speed rpm 300 Feed per main shaft revolution mm/1 rev. 4 - 30 Maximum number of saw blades pcs. 12 Main motor power kW 45 Lhedpoyhzhhefx Abzol Feed motor power kW 4 Hydraulic unit motor power kW 2.2

Year of construction: 1974, condition: used, functionality: unexamined, For sale: - Circular saw mill, type OS65, from a carpentry/lumber mill in very good condition. - Low operating hours, only approx. 800-1000 m³/year. - Clamping carriage, self-propelled. - Auxiliary carriage. - Approx. 15m of guide rails for the clamping carriage/auxiliary carriage. - Splitting wedge/outfeed rollers, not driven. - €20,000 net / plus VAT. The following are also available separately: - Log infeed system Lhodpfx Aboz Dn Ulozjl - Chain hoist with transverse conveyor Prior inspection is required.

Condition: used, - used spiral roller conveyor - 2 pcs separating lamellas - 6,000 mm length - 800 mm roller width - approx. 1,000 mm overall width - approx. 150 mm roller diameter Lsdpfsw Ag Dzex Abzshl - approx. 430 mm roller pitch - SEW feed gear motor

Condition: used, Wursten & Dietz mechanical nailer. Prepared for nailing skates. Lhedpfelvripjx Abzsl The machine is sold as is.

Condition: used, Connecting rod / bar frame strut / connecting rod as a spare part for a Wurster & Dietz GXV 71 or EWD bar frame. Technical data: - Overall length: approx. 3,270 mm Lhedpfxjzrx Ete Abzel - D1: 190 mm - D2: 150 mm - Material thickness: 50 mm - Centre-to-centre distance: approx. 3,020 mm

Condition: refurbished (used), Year of construction: 2004, functionality: fully functional, height adjustment type: hydraulic, input voltage: 380 V, passage height: 230 mm, We are offering these two refurbished Wintersteiger DSG 150 ECO frame saws, year of manufacture 2004. Machine type: DSG 150 ECO Voltage: 380 V Power: 11 kW each Included free of charge is a Tensionmaster for crowning the blades and a set of blades valued at €2,000. Ledpfsydfgcjx Abzehl If you have any questions or require further information, please do not hesitate to send us a message or call us.

Condition: good (used), functionality: fully functional, High-performance band saw / HIGH SPEED FRAME SAW EWD HDN 600 TECHNICAL DATA: Well-maintained, high-performance band saw Frame width: 710 x 735 mm Stroke: 600 mm Speed: 310 rpm Fully hydraulic with automatic overhang adjustment Lsdpoz Aqlmjfx Abzjhl Hydraulic saw tensioner and saw chuck Drive motor and gearbox Electrical control cabinet with control system Splitting wedge, type AVER, with hydraulic drive In very good condition, (complete overhaul available upon request!) Excellent condition with remotely controlled clamping carriage and 1 band saw EWD LSH as well as one band saw EWD GDZGE 600 in stock!

Condition: excellent (used), 1 saw frame in very good condition 710 mm frame width with 8 guide shoes in good condition Lhsdpfxjlni Uqo Abzjl

Condition: excellent (used), Year of construction: 2016, Cutting Capacity 0° round (tube): 300 mm Cutting Capacity 0° round (solid material): 180 mm Cutting Capacity 0° rectangular horizontal (hollow section): 320 x 290 mm Cutting Capacity 0° bundle (tube): 320 x 160 mm Cutting Capacity -45° round (tube): 300 mm Cutting Capacity -45° round (solid material): 110 mm Cutting Capacity -45° rectangular horizontal (hollow section): 300 x 280 mm Cutting Capacity -60° round (tube): 200 mm Cutting Capacity -60° round (solid material): 80 mm Cutting Capacity -60° rectangular horizontal (hollow section): 190 x 200 mm Cutting Capacity +45° round (tube): 270 mm Cutting Capacity +45° round (solid material): 110 mm Cutting Capacity +45° rectangular horizontal (hollow section): 270 x 200 mm Table height, material feed: 800 mm Main motor: 2.6 kW Cutting speed, stepless: 20 - 100 m/min Saw blade size: 3660 x 27 x 0.9 mm Machine dimensions (L x W x H): approx. 1800 x 950 x 1400 mm Net weight: 585 kg Accessories / Special features: • Semi-automatic swing-frame metal band saw • After the cutting cycle is started, the vice clamps automatically – after completion, it returns to its starting position • For mitre cuts from +60° to -45° with frequency inverter • Suitable for cutting stainless steel, tool steel, hollow profiles, and solid materials • Fully hydraulically controlled sawing functions • Saw drive with low-maintenance, oil-lubricated worm gear • Robust three-phase motor • Motor equipped with overload protection • Ball-bearing turntable • Saw arm inclined at 25°, resulting in longer saw blade service life • Saw arm swivels from +60° to -45° • Chip removal brush for optimal saw blade cleaning and maintenance • Frequency inverter: allows stepless adjustment of saw blade speed from 20 - 100 m/min • BRP – Saw band monitoring • Hydraulic vice with manual quick-release for lateral adjustment • Limit switches control upper and lower saw arm positions • No need to set the upper end point • Length stop with scale, left-side removal 3 m • Cut detector • Swivelling control panel • Micro-spray device Lhjdjxz Dqmjpfx Abzol • 2 x roller conveyors: 3 m discharge left, 6 m feed right • CE compliant Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Condition: used, Frame saw Pini & Kay FN65 HH Passage width: 650 mm Drive motor: 33 kW with saw blades with suspension with intermediate shaft with splitter wedge Immediately available Lhodpfx Ajxvz Hzebzjl Location: Austria, near Graz

Year of construction: 1982, condition: ready for operation (used), We offer you frame saws: 1. Frame saw Bogli 71 with infeed and auxiliary car, and distribution device behind the sawmill. Sawmill type: Bogli Marathon 71 Frame: 710 mm, hydraulic sawmill Hydraulic lifting and lowering of the saw blade 55 kW motor Ljdpfxjn I Udxe Abzshl Car with auxiliary car, track gauge 90 cm Distribution device behind the sawmill All as shown in pictures no. 1, 2, 3, 4 Price is negotiable. 2. Saw gate Linck E 28-28 Frame stroke 600 mm All as shown in pictures no. 5, 6, 7, 8 Price is negotiable. 3. Saw gate Linck with a loading car and a distribution device behind the sawmill. Saw frame Linck 71 – Frame width 710 mm – Feed rate 12 m/min – Fully hydraulic: hydraulic shifting of the saws, lowering and lifting of the saw blade Linck hydraulic loading car with additional equipment. Distribution device behind the sawmill (sack, wedge) All as shown in pictures no. 9, 10, 11, 12, 13 Price is negotiable.

Condition: excellent (used), functionality: fully functional, Complete saw frame for Esterer Gatter HDE or SS 71. Lsdpfx Aoxw Ubnobzshl