Used Wmz H200-O for sale (54,018)

Year of construction: 2018, condition: ready for operation (used), Machining processes: drilling, turning, milling, axes: Z3 longitudinal slide tool turret, Z4 longitudinal slide tool turret, X3 cross slide tool turret, X4 cross slide tool turret, C1 workpiece drive, C2 workpiece drive, K5 turret swivel axis, K6 tool drive, K7 turret swivel axis, K8 tool drive, travel X3: 251mm, X4: 251mm, Z3: 662mm, Z4: 662mm, tool turret: 12-station radial, DIN 69880-VDI40, drive: DIN 5480-W20x0.8, tool swing diameter: 580mm, specified dimension at tool area: 320mm, length: 13,000mm, width: 7300mm, height: 4100mm, weight: 22t, operating hours: 14,748h. Equipment: OP012 control panel, Kuka handling robot, chip conveyor, coolant tank, hydraulics, pneumatics, electrical cabinet, parts infeed and outfeed, documentation, installation plan, working area diagram, gearbox plan and transport plan. The following components should be overhauled: machine bed (guideways/ball screws), motor spindles with release units (replace bearings/reseal), cross slides (guideways/ball screws/motor), workpiece spindle (replace bearings/reseal), protective enclosure (interior cladding/working area door/repaint machine), coolant pumps, replacement of electrical cables/lubrication and hydraulic lines, as required. An on-site inspection is possible. Bedpfx Aeztducemrswu

Condition: excellent (used), Year of construction: 2011, operating hours: 57,077 h, functionality: fully functional, machine/vehicle number: 179742, clamping force: 700 kN, screw diameter: 30 mm, displacement volume: 99 cm³, injection pressure: 1,451 bar, injection weight: 89 g, Here, as a specialist dealer in injection moulding machines, we are offering the following well-maintained used injection moulding machine: Of course, we also purchase well-maintained injection moulding machines from model year 2010 onwards. We have been a wholesaler of injection moulding machines for more than 25 years. Vertical rotary table injection moulding machine – complete service history (annual documentation) Manufacturer: Engel Type: Insert 200H/70 Serial number: 179742 Year of manufacture: 2011 Operating hours: 57,077 h Control unit: CC 200 Language: German/English Fully functional Very well maintained condition Machine comes from the original German owner xxxxx without illustrated peripheral equipment xxxxx Extras: - Light curtain / light barrier - Freely programmable inputs and outputs - 9 freely programmable inputs, programmable by station Bsdoy Ir Nyepfx Amrowu - 9 freely programmable outputs - Handling interface Euromap 67 - Charge amplifier for cavity pressure-dependent post-pressure switching, including corresponding graphic pages - 3 volt-free monitoring inputs for monitoring peripheral equipment, such as temperature controllers - Euromap 63 interface for connecting to machine data acquisition system - Hot runner and shut-off nozzle control - Complete maintenance booklet - Language: German / English Injection unit: - Screw diameter: 30 mm - Shot weight: 89 g PS - Injection pressure: 1,451 bar / boosted 2,205 - Injection volume: 99 cm³ Clamping unit: - Clamping force: 70 tons / 700 kN - Rotary table diameter: 1,200 mm - Opening stroke: 305 mm - Ejector stroke / force: 105 mm / 20.1 kN - Fully electric clamping unit Warranty: - Warranty until initial commissioning Loading/Shipping: - Free loaded onto buyer's truck, or free delivery (FOB) against reimbursement of shipping costs - Available ex-stock Hannover, Germany

Condition: used, Year of construction: 2019, New machine (used only for demonstration purposes in a school) Number of axes: 4 X-axis travel: 4000 mm Y-axis travel: 1670 mm Z-axis travel: 500 mm Spindle power: 12 kW, 24000 RPM * Number of axes: 4 * X-axis travel: 4000 mm * Y-axis travel: 1670 mm * Z-axis travel: 500 mm Bwjdpszuxi Rofx Amrsu Technical specification * Spindle power: 12 kW * Spindle speed: 24000 RPM Additional information * Working area (maximum table size) * X: 3300 mm * Y: 1280 mm * Z distance: 250 mm * Spindle: * Tool interface: HSK F63 * Rated power at: approx. 12,000 RPM * Cooling: Air-cooled * Rotation: CW / CCW * Tool magazine * Linear tool magazine (side-mounted): 12 positions * Additional linear magazine on the portal: 4 positions * Max. tool diameter: 250 mm * Max. tool length: 300 mm * Drilling unit * Model: DH 24 6H 2S * Vertical spindles: 18 (12 in X, 6 in Y) * Horizontal spindles: 6 (4 in X, 2 in Y) * Max. drill length: 70 mm * Max. tool diameter: 10 mm * Nut sawing machines: 2 (X and Y) * Max. saw diameter: 120 mm * Max. speed: 6,000 RPM * Vacuum table * 6 supports (instead of 4) * Two-circuit vacuum system * Height of vacuum suction cups: 100 mm * Pneumatic support locking * Adjustable side stops (Y-axis) * Axis system * X-axis: Rack and pinion drive * Y/Z-axis: Ball screw drive * Linear guides in all axes * Automatic central lubrication * Control and software * CNC control with CAD/CAM software * 3D simulation preview * DXF import function * Parametric programming * Remote maintenance package (internet-enabled)

Condition: excellent (used), Year of construction: 2007, operating hours: 70,000 h, functionality: fully functional, machine/vehicle number: ERGOTECH 200 - 840, clamping force: 2,000 kN, screw diameter: 50 mm, clearance between the columns: 560 mm, displacement volume: 442 cm³, mold height (min.): 340 mm, plate width: 860 mm, plate height: 860 mm, pump power: 30,000 W, The machine is fully operational and was working with injection until the end. Bedpjyxn Tvofx Amrjwu

Condition: used, Year of construction: 2021, Short description for sale: Felder Format4 Profit H200 CNC wood milling machine, purchased on May 14, 2021, including a vacuum clamping table. Professional CNC machine for the precise machining of larger wood and panel workpieces, suitable for demanding workshop and production applications. Key technical data: - Machine type: CNC machining center / CNC wood milling machine - Model: Format4 Profit H200 R 13.33 - Working area X: approx. 3300 mm - Working area Y: approx. 1280 mm - Working area Z: approx. 250 mm - Main spindle: approx. 13.2 kW - Max. speed: up to approx. 24,000 rpm - Tool holder: HSK-F63 - Tool changer: 24 - Vacuum system: including vacuum clamping table / vacuum clamping - A very attractive main asset for carpentry shops, interior design, prototyping and small-series production - Suitable for milling, drilling, grooving, contouring and panel processing Bwedpfx Aszupcbomrju - Vacuum clamping table as an important selling point for efficient clamping of panel materials No warranty.

Condition: used, Year of construction: 2021, Technical Data Automatic Central Lubrication Working Area Axis Travel Bedpfezux Iasx Amrjwu X = 4000 mm Y = 1670 mm Z = 500 mm Working Range X = 3300 mm Y = 1280 mm Z = 250 mm, clearance height depending on the clamping system Operator Terminal on the Left Side of the Machine Handheld Terminal for Controlling Axis Speed, Including an Emergency Stop Switch Machine Software: Woodflash Consisting of: - CNC Board - Tool Database - Program Editor Position Indicator for Workpiece Support and Vacuum Suction Cup Vacuum Connection for Template Milling on the Left Side of the Machine: Connection: 12 mm 1 Vacuum Pump with a Total Suction Capacity of 90 m3/h at 50 Hz or 108 m3/h at 60 Hz Milling Spindle 12 kW (S6) HSK F63 12 kW (S6) Full Rated Power at Approximately 12,000 RPM Speed: 1000 - 24,000 RPM Air-Cooled C-Axis 0-360 for Milling Spindle 12-Position Linear Tool Changer on the Left Side of the Machine Frame, Including a Pickup Station for Aggregates Max. Tool Diameter: 250 mm Max. Tool Length: 240 mm Drilling Head DH 16 4H 2S 12 Vertical Spindles 7 Spindles in the X-Direction and 5 Spindles in the Y-Direction 4 Horizontal Spindles 2 Spindles in the X-Direction and 2 Spindles in the Y-Direction Pre-Travel = 70 mm Drilling Length = 70 mm Shaft Diameter D = 10 mm 2 Nut Saws, One Each in the X and Y Directions Max. Saw Blade Diameter: 120 mm Max. Blade Thickness: 5 mm Max. Speed, Continuously Adjustable: 7500 RPM Safety System with Light Curtain on the Front

Condition: good (used), Year of construction: 2009, Clamping force: 90 t Screw diameter 1 : 30 mm Bsdpozg Ib Tjfx Amrewu Screw diameter 2 : 25 mm Type: Multicomponent Drive: Hydraulic

Condition: used, Albatros Numerical Control with TPA CAD Software Working range on X-axis mm 3260 Working range on Y axis mm 1200 Working range in Z-axis N ° 2 work fields Bar worktop No. 6 electronically adjustable bars by C.N. Line laser for virtual 0 position in Y direction N° 4 pneumatic Bakelite bars for lifting the panel No. 3 electronically adjustable suction cups by C.N. for each bar with vacuum seal for fixing the panel during processing No. 1 vertical electrospindle with C-axis, with automatic tool changer with No. 10 positions, Hsk type cones Automatic tool change system with 12 positions - positioned on the machine side Drilling head with 17 spindles arranged as follows: - No. 8 verticals on X axis - N° 5 verticals in Y axis - No. 2 horizontal on X axis - N° 2 horizontal in Y axis No. 2 blade groups for making grooves on the X and Y axes Front protection and safety system with carpets Automatic lubrication system (Air conditioning system for cooling and cleaning of machine control) Vacuum pump mc/h 250 Bwjdpfx Amevph Hxjrju

Condition: good (used), Year of construction: 2009, Clamping force: 90 t Screw diameter: 30 mm Screw diameter 2: 25 mm Type: Multicomponent Drive: Hydraulic Bwsdpfoy Duaajx Amrsu

Condition: used, Year of construction: 2022, total height: 2,400 mm, total length: 5,300 mm, total width: 2,350 mm, Colour: Grey Empty weight: 4.000 kg What are Presale Items at Second Owner? Presale items are machines that we sell in their current condition ("as-is"). We have purchased these machines based solely on photos and sell them with the information provided in the advertisement. Unfortunately, we do not have additional details, such as exact dimensions or machine specifications. Additionally, these machines are often not yet in stock and have not been inspected by us. These machines are offered at competitive prices, which means the prices are lower than usual, but the risk lies entirely with the buyer. Please carefully review the information in the advertisement before making a purchase. If you have any questions, feel free to contact us! - Year: 2022 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: 30B.11.040.22 - Number of milling spindles [pcs.]: 1 - └ Milling spindle 1: - - Number of controlled axes [pcs.]: 4 - - Max. spindle speed [rpm]: 24000 - - Main motor power [kW]: 11 - Type milling table: Beam table - Tool holder: HSK-F63 - Material clamp system: Pneumatic - Drilling unit present: Yes - └ Horizontal drill spindles [pcs.]: 4 - └ Vertical drilling spindles [pcs.]: 12 - Saw unit present: Yes - Tool changer positions [pcs.]: 12 - System/software: WoodFlash - Safety feature: Safety light curtain - Vacuum pump present: Yes - └ Number [pcs.]: 1 - └ Brand: Becker - └ Type: PICCHIO 2200 - └ Year of manufacture: 2022 - Tools included: Yes - CNC options: Manual control - CNC documentation available: User keys/licenses, USB stick - Table length [mm]: 3300 - Table width [mm]: 1280 - Working range X [mm]: 3300 - Working range Y [mm]: 1280 - Z-axis working range [mm]: 250 - X-axis maximum stroke [mm]: 4000 - Y-axis maximum stroke [mm]: 1670 - Z-axis maximum stroke [mm]: 500 - Voltage [V]: 400 - Current consumption [A]: 40 - Power [kW]: 18.0 - Installed length [mm]: 6250 - Installed width [mm]: 3494 - Installed height [mm]: 2300 - Transport dimensions: 5300mm x 2350mm x 2400mm (l x w x h) Bedpfozwul Hjx Amrswu - Transport weight [kg]: 4000kg - Transport packages [pcs.]: 2 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 2016, Working area: X=3300 mm Y=1280 mm Z=150 mm Clearance height Operator terminal: 24" LED colour display Handheld terminal for axis speed control Software: "Woodflash Vacuum pump 90 m³/h/50 Hz or 108 m³/h/60 Hz Milling spindle 12 kW HSK F63 (12,000 rpm) 12-position linear tool changer on the left of the machine frame + pickup station Drilling head DH 16 4H 2S: Vertical 12 spindles Horizontal 4 spindles 2 grooving saws Storage location: Nattheim Bodpsz A Aw Ssfx Amrswu

Condition: reconditioned (used), Year of construction: 2004, Engel 2-shot injection molding machine (horizontal and vertical) 80 tons clamping force also for moulds INDEX. Year 2004, approx. 58.000 hours. This machine will be delivered re-conditioned (Full checked tested and operative) Ask us about our service of Start up. Bodpep At Udofx Amrswu Technical details CLAMPING FORCE 800 kN YEAR OF BUILDING 2004 WORKING HOURS 58.332 SCREW DIAMETER 18 mm horizontal SCREW DIAMETER 30 mm vertical TRAVEL OPENING 457mm INJECTION PRESSURE 2207 BAR (horizontal) INJECTION PRESSURE 1451BAR (vertical) INJECTION VOLUMEN 26cm3 (horizontal) INJECTION VOLUMEN 99cm3 (vertical)

Condition: excellent (used), Year of construction: 2020, Maximum turning diameter 3800 mm Maximum swing diameter 3800 mm diameter of spindle flange 1900 mm control Siemens 840 D sl Table rpm 100 1/min Maximum speed of driven tools 6000 1/min x-travel 2800/3200 mm z-travel 1000 mm Feed - X 20 m/min feed capacity - x 22 kN tool taper CAPTO C8 total power requirement 280 kVA dimensions of the machine ca. 10,4 x 6.3 x 5,7 m weight of the machine ca. 155 t Equipment/Accessories: - 2 tool changers, each with 60 positions - 2 x chip conveyors - Coolant system, 6 bar - High-pressure cooling, 70 bar - Knoll paper belt filter - 12-jaw balancing chuck, RÖHM - internal coolant supply Bwedpfx Ajzpzblomrju - Hydraulic unit - Automatic door - Electric handwheel - Technical documentation

Condition: ready for operation (used), Year of construction: 2022, functionality: fully functional, power: 18 kW (24.47 HP), travel distance X-axis: 3,300 mm, travel distance Y-axis: 1,280 mm, travel distance Z-axis: 250 mm, number of spindles: 16, TECHNICAL DETAILS Working area X-axis: 3,300 mm Working area Y-axis: 1,280 mm Working area Z-axis: 250 mm Travel X-axis: 4,000 mm Travel Y-axis: 1,670 mm Travel Z-axis: 500 mm Number of horizontal drilling spindles: 4 pcs. Number of vertical drilling spindles: 12 pcs. Bwodpfx Asyux I Uemrou MACHINE DETAILS Voltage: 400 V Current consumption: 40 A Power: 18 kW Number of transport packages: 2 EQUIPMENT Documentation CE marking HSK-F63 tool clamping system Drilling tool Saw unit

Year of construction: 2020, condition: ready for operation (used), A large-format CNC twin-spindle vertical turning machine WMZ is available. Travel X1/X2: 2950mm/2650mm, travel X: 5600mm, travel Z1/Z2: 3200mm/2830mm, feed rate X: 32m/min, feed rate Z: 20m/min, max. workpiece diameter: 3800mm, max. swing in working area: 4000mm, min. workpiece diameter 4-axis internal machining/external machining: 1250mm/1500mm, min. workpiece diameter 2-axis internal machining: 450mm. Table speed: 100rpm, tool stations: 2x47, tool interface: Capto C8, max. tool diameter: 120mm, max. tool length: 400mm, max. tool weight: 20kg, spindle power: 240kW/202kW. Machine dimensions X/Y/Z: approx. 15600mm/10350mm/5750mm, control: Siemens Sinumerik 840D sl. Documentation available. An on-site inspection is possible. Bwodpfx Amozgwylereu

Year of construction: 2020, condition: ready for operation (used), A large-format CNC twin-spindle vertical turning machine WMZ is available. Travel X1/X2: 2450mm/2750mm, travel Z1/Z2: 2700mm/2300mm, max. workpiece diameter: 2800mm, max. swing diameter in the working area: 3000mm, min. workpiece diameter for 4-axis external machining/internal machining: 1250mm/1500mm, min. workpiece diameter for 2-axis internal machining: 450mm, rotary table speed: 230rpm, feed rate X: 32m/min, feed rate Z: 20m/min, B-axis speed: 150rpm, spindle power: 33kW, tool stations: 2x47, tool interface: Capto C8, max. tool diameter: 120mm, max. tool length: 400mm, max. tool weight: 20kg. Machine dimensions X/Y/Z: approx. 9350mm/8600mm/5700mm, control system: Siemens SINUMERIK 840D sl. Documentation available. An on-site inspection is possible. Bedpfx Ajzgwyxemrjwu

Year of construction: 2017, operating hours: 1,052 h, condition: reconditioned (used), functionality: fully functional, machine/vehicle number: SN. S10008727, The dynamic temperature control system "vario" is designed for cyclic mold temperature management. It is equipped with a mold-proximal valve switching unit (piston accumulator) to supply the piston inserts with water at temperatures of up to 200°C. NEW PRICE of the system: €67,000 plus the water hoses. The system will be inspected by Technotrans (GWK) prior to sale. Bwedpfx Amoyxgnforju More technical details about the “vario” temperature control unit available on request... The complete system consists of: - Medium: water up to max. 200°C - Heating capacity (heating circuit): 90 kW - Heating capacity (cooling circuit): 9 kW - Cooling: indirect - Cooling capacity: 280 kW - 1 piece of 2-circuit vario system wh200 (cyclic temperature control of mold inserts) - 1 mold-proximal valve switching unit - 1 piston accumulator - 1 electronic control and regulation unit ESR (energy storage) - 1 water treatment unit - 1 hose and connection package, optional for an extra charge ...and more, see pictures.

Condition: excellent (used), Year of construction: 2021, Maximum turning diameter 2800 mm Maximum swing diameter 3000 mm diameter of spindle flange 1100 mm control Siemens 840 D sl Table rpm 230 1/min Maximum speed of driven tools 6000 1/min x-travel 2700 mm z-travel 1000 mm Feed - X 24 m/min feed capacity - x 22 kN tool taper CAPTO C8 total power requirement 200 kVA dimensions of the machine ca. 10,4 x 6.3 x 5,7 m weight of the machine ca. 120 t Equipment/Accessories: - 2 tool changers one with 25 positions and one with 41 positions - 2 x chip conveyors - Coolant system, 6 bar Bjdozf Np Nspfx Amrjwu - High-pressure cooling, 70 bar - Knoll paper belt filter - 12-jaw balancing chuck, RÖHM - internal coolant supply - Hydraulic unit - Automatic door - Electric handwheel - Technical documentation

Condition: ready for operation (used), Year of construction: 2022, machine/vehicle number: 30B.11.040.22, functionality: fully functional, TECHNICAL DETAILS Working area, X-axis: 3,300 mm Working area, Y-axis: 1,280 mm Working area, Z-axis: 250 mm Travel, X-axis: 4,000 mm Travel, Y-axis: 1,670 mm Travel, Z-axis: 500 mm Milling spindle Number of milling spindles: 1 Max. spindle speed: 24,000 rpm Main motor power: 11 kW Tool clamping system: HSK-F63 Table design: Cantilever table Table length: 3,300 mm Table width: 1,280 mm Material clamping: Pneumatic Drilling unit Drilling tools available Horizontal drilling spindles: 4 Vertical drilling spindles: 12 Tool changer positions: 12 MACHINE DETAILS Controlled axes: 4 Software: WoodFlash Voltage: 400 V Current consumption: 40 A Connected load: 18 kW Dimensions & Weight Dimensions (L x W x H): 6,250 x 3,494 x 2,300 mm Shipping dimensions (L x W x H): 5,300 x 2,350 x 2,400 mm Shipping weight: 4,000 kg Shipping packages: 2 EQUIPMENT Sawing unit Vacuum pump Becker PICCHIO 2200, year of manufacture 2022 Safety light curtain Manual control panel Tools CNC documentation with user keys/licenses and USB stick Bwsdpfx Amozrmuvjrou Documentation CE marking

Condition: good (used), Year of construction: 2007, operating hours: 687 h, empty load weight: 790 kg, fuel type: electric, JLG 1230 ES Mast lift / Vertical Lift, 5.44M working height, electric, 2007. A video can be sent via WhatsApp. We have a continuous stock; see our website. Prices are ex Nuland. Van de Wert Trading B.V. has a varying stock of machines, trucks, trailers, and attachments. All our deliveries are at trade prices in AS-IS condition without guarantees (see our general terms and conditions). You can make an appointment for a viewing and/or test drive without any obligation. Please call in advance, as we are not always present. Van de Wert Trading B.V. Bedrijfsstraat 3 5391 LR Nuland Bwsdpfjz H Ua Tox Amrju

Condition: good (used), Year of construction: 2007, operating hours: 318 h, empty load weight: 790 kg, fuel type: electric, JLG 1230 ES Mast lift / Vertical Lift, 5.44M working height, electric, 2007. A video can be sent via WhatsApp. We have a continuous stock; see our website. Prices are ex Nuland. Van de Wert Trading B.V. has a varying stock of machines, trucks, trailers, and attachments. All our deliveries are at trade prices in AS-IS condition without guarantees (see our general terms and conditions). You can make an appointment for a viewing and/or test drive without any obligation. Please call in advance, as we are not always present. Van de Wert Trading B.V. Bedrijfsstraat 3 Bwodpfxoz H Ubko Amreu 5391 LR Nuland

Condition: good (used), Year of construction: 2008, operating hours: 528 h, fuel type: electric, Genie GS-1932 Scissor Lift / Scissor Lift 8m Working Height, Electric, 2008 Bodpfxsz H Ua Hs Amrewu A video can be sent via WhatsApp. We have a continuous stock; see our website. Prices are quoted ex works Nuland. Van de Wert Trading B.V. has a varying stock of machines, trucks, trailers, and attachments. All our deliveries are offered at trade prices in AS-IS condition without any guarantees (see our general terms and conditions). You can make a non-binding appointment for a viewing and/or test drive. Please call in advance as we are not always present. Van de Wert Trading B.V. Bedrijfsstraat 3 5391 LR Nuland

Condition: like new (used), Year of construction: 2021, functionality: fully functional, Fanuc M Series Robot Unit Complete - Type: M1IA0.5A-30P-O-CE..+ The M-1𝑖A/0.5A is a high-speed, 6-axis Delta robot, ideal for compact, high-speed order picking and assembly applications. With a payload of 0.5 kg and a work envelope of up to 280 mm, this robot is perfect for small parts handling processes requiring high versatility in industries such as electronics, precision engineering, food, medical and pharmaceutical. Its unique delta design mechanism is ideal for fast, dexterous assembly applications. It can also easily cover an additional range of applications by simply adding another optional 500 g of payload. Bodpfx Ajzzpuwemrowu - Robot: M-1iA/0.5A - Robot type: Delta / parallel robot - Axes: 6 - Standard payload: 0.5 kg - Optional payload: up to 1 kg - Reach: 280 mm - Repeatability: ±0.02 mm - Weight: FANUC lists the mechanical unit itself at around 17 kg in some documentation. - Mounting: floor, ceiling/inverted or angled - Protection: IP20 - Typical controller: R-30iB Plus / R-30iB Mate Plus depending on configuration.

Condition: used, Year of construction: 1979, functionality: fully functional, working width: 1,100 mm, working height: 160 mm, type of input current: three-phase, input voltage: 380 V, OTT RS-O 110 Wide-Belt Calibrating and Sanding Machine Used industrial wide-belt sanding machine manufactured by OTT. The machine is equipped with two sanding units and is suitable for calibrating, pre-sanding, and fine sanding solid wood, furniture components, and panel materials. Technical specifications: Manufacturer: OTT Model: RS-O 110 Year of manufacture: 1979 Machine number: 354 Maximum working width: 1,100 mm Maximum workpiece height: 160 mm Number of sanding units: 2 Total installed power: 30 kW Power supply: 380 V Feed speeds: 2 Operating pressure: 8–10 bar Dust extraction connections: 2 × Ø 200 mm Approximate dimensions: 2,230 × 2,020 × 2,050 mm Approximate weight: 3,000 kg Machine configuration: Grooved rubber calibration roller Pneumatic sanding pad with metal rollers Pneumatic sanding-belt oscillation with photocell control Electrically adjustable working table Integrated cleaning brush Industrial heavy-duty construction The machine is offered in used condition. Its actual condition, equipment, control panel, and internal components are shown in the photographs. Bodpjz Dxkdefx Amrowu Inspection is possible by prior appointment. Location: Gātciems, Latvia Loading assistance can be provided. European transport can be arranged upon request. Price: EUR 2000 net, excluding VAT.

Condition: good (used), Year of construction: 2007, operating hours: 462 h, fuel type: electric, JLG 1930 ES Scissor Lift / Scissor Lift, 8m working height, electric, 2007, battery replaced in 2024. A video can be sent via WhatsApp. We have a continuous stock; please see our website. Prices are quoted ex-works Nuland. Van de Wert Trading B.V. has a varying stock of machines, trucks, trailers, and attachments. All our deliveries are at trade prices, in AS-IS condition, and without guarantees (see our general terms and conditions). You can make a non-binding appointment for a viewing and/or test drive. Please call in advance as we are not always on site. Van de Wert Trading B.V. Bedrijfsstraat 3 5391 LR Nuland Bedpez H Ubwofx Amrowu