Hiab 031 for sale

Your location was not identified (Edit)
Enter your address
or
Move
6

- USED - CO2 LASER CUTTING MACHINE WITH PALLET CHANGER LVD IMPULS 8031

Matelica (MC), ItalyItaly dealership location
17814 km
2006
ready for operation (used)
X-AXIS TRAVEL: 3150 mm Y-AXIS TRAVEL: 4070 mm Z-AXIS TRAVEL: 280 mm WORKING AREA: 8000 x 3000 mm ADMITTED LOAD ON TABLE: 4800 Kg SOURCE: FANUC C4000 E ; 4000 W CONTROL UNIT: FANUC 160 iLB OVERALL DIMENSIONS: 22000 x 8700 x 2500 mm Nnmfb PRICE: On demand more
6
Bosch SD-B3.031.030-00.000 brushless servo engine, series number according to photo, used, good conservation status, 100% functional, supplied according to photos Be90jnunx3 more
5
Pressing force 150 to Bending length 3100 mm Delivery time prompt, intermediate sale reserved Bending length: 3,100 mm Pressing force: 150 to Distance between stands: 2,550 mm Engine power: 11 kW Extension: 300 mm Installation height: 435 mm Table width: 160 mm Length: 3,100 mm Width: 1.370 mm Height: 2,940 mm (on beams) Under hallway: 280 mm Be9kfrrdfz Weight: 9.600 kg Motor ized rear stop with 2 finger blocksBack stop control type BNC 10 with 10-fold pre-selectionElectrohydraulic synchronisat... more
11

Bed type Correa Milling machine CORREA CF22/25 - 9670311CF22/25

Burgos, SpainSpain dealership location
19180 km
1997
ready for operation (used)
Retrofitted: 2018 Numerical control: HEIDENHAIN TNC-426 Technical features Dimensions Table dimensions: 2500 x 700 mm Number of slots: 5 T slots dimensions: 22 mm Traverses of axis X axis traverse: 2500 mm Bzuo9rj Y axis traverse: 800 mm Z axis traverse: 800 mm Milling head Head type: Universal ma... more
6
Three-phase transformer, transformer, Travo ([...] Elektrotechnik GmbH, 77652 Offenburg, Germany) DLGX type 630F-0315T11001 Fabr. No. 123319 built in 2003 Nominal power 505 kVA Primary voltage input 480 / 400 voltage Primary voltage input +/-20 / 40 / 60 volts (adjustable by means of connector pin assignment) Primary input current 857-540 amp. Secondary voltage output 150 / 255 / 360 Volt Secondary output current 810 amps Frequency 45 to 65 Hz -Input and output voltage within the spec... more
2
measuring of clamping force on three-jaw chucks measuring range 0 to 75 KN Bdnlltekfc diameter 70 mm piston surface 3 x 4.9 cm² height 40 mm more
5
Demag ERGOtech 500-310 Year: 1997 Control unit: NC4 Screw diameter: 35mm Injection pressure: 2024 bar Injection volume: 168,3 cm3 Clamping force: 500 kN Platen size: 520 x 520 mm Distance between tie bars: 355 x 355 mm Mould height(min.): min. 210 mm Opening storke: 400 mm Max. daylight: 610 mm Bfaiqzzchu Drive power of the hydraulic pump: 22 kW Cylinder heating power: 9,4 kW Machine dimensions(m): 3,8 x 1,4 x 1,8 m Weight: 2950 kg more
0
3 Shotpeening-wheels including Motor. One device with a new wear Equipment. Bfaik2brxa more
6

Injection moulding 51 - 100 ton. DEMAG Ergotech compact 100-310

Cerreto D'Esi, ItalyItaly dealership location
17814 km
1995
ready for operation (used)
Tonnage:100 Clearence between tie-bars:400 x 400 Screw diameter:35 Min/Max mould thickness: 250 Robot connection Euromap-12:Yes Csc3xqgo Mov. plasten stroke: 500 more
10
Drive type Diesel Carrying capacity 8000 kg Load focus 1100 Available in the short term Bfaanhi8an Condition visually very good Condition technically very good Masttype Triplex Lift height 4855 mm Free hub 1555 mm Forks length 2400 mm Attachment devices side slider zinc adjustment device Special equipment 3rd valve 4. Valve work headlights pointed work headlights pre-heating Russian filterSTVZO Admission Full Free Excess Working height 3010 mm Tire front type superelasticity Tire rear type supe... more


hiab 031
daily

New machines via email!

Stay updated!
5

Press Brakes Safan PLCS 110-3100 Safan PLCS 110-3100

Birmingham , United KingdomUnited Kingdom dealership location
18426 km
ready for operation (used)
Used Safan 3metre x100ton Plcs ts2 CNC pressbrake for sale Brand: Safan Type: PLCS 110 3100 TS2 Capacity: 3100 x 110 tons / 3metre x 100ton New in / Year: 1998 Price on request Description : In good working condition used 3 meter folding bench from Safan   Type: PLCS 110 3100 Capacity: 3100 x 110 tons TS 2 CNC control CNC bombering Die-cut die 5 axis in total 3 axis back gauge Complete with: Manuals Tooling Be98abim3k Safety guards Delivery and installation can be arranged at extra cost more
2

Seepex MD 003-12 - Pumpen Seepex MD 003-12 - Pump

MA Barneveld, NetherlandsNetherlands dealership location
18075 km
used
Make Seepex GmbH Germany, Type MD 003-12, [...] 315057, Material Stainless steel 1.4404 (316L), Pump , Number of pumps: 1, With motor 0,37 kW, 230/400-265/460 Volt, Inlet dia.1 inch, Outlet dia.1/2 inch, New 2015, Floorspace 0.65X0.2 M, Total height 0.15 M, Weight 30 KG What you can expect from Foeth: all our machines are in working condition, and at a reduced price compared to new. They are ready for shipping to any destination worldwide. You are welcome to inspect our machines in Barneveld, Th... more
6
The 405 is a Unimog used offer the Unimog Huber GBR. The Mercedes Benz Unimog with the warehouse number UP10 has its initial approval by the 24.9.2003 and engine performance according to vehicle letter from 130 kw. The emission of the diesel unit is EURO 3 emission class. Mileage according to tachograph is 231129 km. Information regarding the technical characteristics of the 405: the Unimog comes from the 405 series and has a wheelbase of 3080 mm. The execution of the front mounting system ... more
1
High Precision Fine Straightening: Max capacities: 1500 x 2 mm // 1250 x 3 mm Niulh more
10

Injection moulding 51 - 100 ton. DEMAG ERGOTECH 80-310 System

Cerreto D'Esi, ItalyItaly dealership location
17814 km
1995
ready for operation (used)
Tonnage:80 Clearence between tie-bars:400x400 Screw diameter:35 Calculated shot volume:168.3 Min/Max mould thickness: 250 mm minimo (150 mm con piani magnetici) Core pull: 1 Euromap: 800-310 Mov. plasten stroke: 450 mm Air ejection: Be9a8qfbo2 1 Magnetic tops more
5
50Hz, 80kW, 380V, 1/min [...] delivered ISO 1217: 10.31 m³/mincompression pressure: 10 bar Final pressure vessel max.: 14 bar 7nlqk23bx more
2

Seepex MD 003-12 - Pumpen Seepex MD 003-12 - Pump

MA Barneveld, NetherlandsNetherlands dealership location
18075 km
used
Make Seepex GmbH Germany, Type MD 003-12, [...] 315058, Material Stainless steel, Pump , With motor 0.37 KW, 230/400 Volt, Inlet dia.1 inch, Outlet dia. 1/2 inch, New 2015, Floorspace 0.6x0.2 M, Total height 0.15 M, Weight 30 KG What you can expect from Foeth: all our machines are in working condition, and at a reduced price compared to new. They are ready for shipping to any destination worldwide. You are welcome to inspect our machines in Barneveld, The Netherlands. Visit our website Foeth for... more
4
Demag Ergotech compact 1000-310 with Mark Wittmann robot built in 1996 Injection unit: screw diameter: 35 mm Shot weight: 149 g Injection pressure: 2020 bar Dispensing volume: 168. 3ccm Clamping unit: clamping force: 100 t Tie bar distance: 400 x 400 mm Size of the clamping plates: 580 x 590 mm Cemzwyia Ejector: hydraulic clamping unit: hydraulic control: NC 4 Additional equipment: EUROMAP Robot interface Core move x 1 Control air valve Hot channel control Dimensions: Wei... more
6

Bending machines Safan CNCL-K 120-3100 TS1

Kaiserslautern, GermanyGermany dealership location
18085 km
2002
ready for operation (used)
General Data Measurements width 4200 mm Measurements depth 1650 mm Measurements height 2775 mm Machine weight 8700 kg Control Unit Brand Safan Model TS1 CNC main language Czech CNC language customizable Yes Main Drive Pressing force 1200 kN Bending length 3100 mm Be3xpdh3qj Stroke 180 mm Additional Equipment Basic tooling General Data Measurements width 4200 mm Measurements depth 1650 mm Measurements height 2775 mm Machine weight 8700 kg Control Unit Brand Safan Model TS1 CNC main language... more
3
Gear motor, electric motor Qlrdee98c Speed 13 U/min Performance 0.18 KW Design B3 Diameter shaft Ø 20 mm Protection class IP 54/65 Weight 17 kg more
2

Fan NESTRO VAU031176

Hohenstein-Bernloch, GermanyGermany dealership location
18018 km
2012
used
diameter 160 mm Bfamzteyr9 2,2 kW volume capacity 2230 m3/h more
4
Knuth manual 3-roller round bending machine KR 10/3,0 Round bending machine 3 rollers, manual round bending machine hardened rollers, also suitable for processing VA steel Upper roller can be swivelled out simple adjustment of the rear and lower roller via handwheel Under and back roller with wire insertion Wheel pre-bed Conical bending device Specifications - KR 10/3,0 - Round bending machine Workspace Be3mycorak Working length 1050 mm Sheet thickness (max.). 3 mm Roller d... more
4
Pressure:0800 t distance between columns:3250 mm stroke:1100 mm Distance table/ram, stroke up:1900 mm Table surface area:3100 x 1900 mm pressure of drawing cushion in table:300 t Die cushion stroke in table:300 mm Die cushion area in table:2500 x 1800 mm Die cushion pressure in ram:80 t Die cushion stroke in ram:200 mm Die cushion area in ram:2200 x 1000 mm Ram surface:3100 x 1900 mm Side window:900 mm Oil volume:4700 l Power capacity:200,0 kW Weight: t Dimensions (WxDxH):4,95 x 3,3 x 10,2 m Hei... more
5

Glue mixing system CASCO 6203-13-020

Klipphausen, GermanyGermany dealership location
17637 km
2005
used
Glue mixing system CASCO 6203-13-020 Iofk37e88 Required space lxwxh: 2400x1050x2400 Weight kg: 440 more
5
Gas forklifts, forklifts, forklifts, forklifts, front forklifts -good condition -Bearing capacity 3000 kg -Lift height 3170 mm -Eigen height 2200 mm -Length without tines 2030 mm -Tine length 1180 mm Vspvta -Zinc cross section 125 x 45 mm -Free-lift mast -Betriebsstd. 7137 hrs -Eigen weight 4330 kg more
3
CNC Pressbrakes Control system: SAFAN Pressing force: 1200 KN Bending length: 3100 mm Max. Stroke: 180 mm Machine dimensions: 4200 x 1650 x 2775 mm Bdnpfzgmz3 Machine weight 8700 kg more
3
Siemens 6FC5203-0AB11-0AA2 flat panel used OP031 version C, serial number according to the photo, properly completely overhauled and tested with 12 months warranty, 100% functional, photos included with com. Ngwsb more
4

Hydraulic Pumps Unit Orsta Hydraulik 56503 16/25

Leipzig, GermanyGermany dealership location
17699 km
1989
used
tank capacity: - l overpressure : - bar motor: 1380 U/min dimensions L x W x H: 0,6 x 0,5 x 1,3 m 7xnglrs7e weight: 77 kg total power requirement: 0,55 kW more
4

Double Column Drawing Press -Hydr. MÜLLER ZE 800-31.1.3

Unterschleißheim, GermanyGermany dealership location
17859 km
1972
used
pressure 800 t distance between columns 3160 mm stroke 1100 mm distance table/blankh.,max. stroke up,adjustm. up 1900 mm table surface area 3100 x 1900 mm die-cushion pressure inside the table 300 t Beolahrm9h stroke of drawing cushion in table 400 mm die-cushion pressure in pusher 80 t stroke of drawing cushion in table 150 mm ram surface 3100 x 1900 mm die-cushion in pusher hydraulic, controlled die-cushion inside the table hydraulic, controlled total power requirement kW weight of the mac... more
3
D8f0k3h more
5

Static Postforming machine BRANDT PF 20-31

Heule, BelgiumBelgium dealership location
18292 km
1994
used
Min/Max. workpiece length 1600 / 3100 mm. Max. profile height 150 mm. Min. Workpiece thickness 16 mm W9krfeil Working height 950 mm. Power installed 7 kW more
6
Field of application: Freight transport Empty weight: 1.970 kg Lifting capacity: 17 kg Number of owners: 1 Technical condition: very good Serial number: EL122DUO0134 - year: 2017, like NEW, only 20 working hours - 12 tm crane - 2 hydr. extensions - ground control on two sides - hook - manuell moving outriggers - working light on the knuckle booom lifting moment (horizontal): Bawqhcmvx0 3,40 m / 3.300 kg 8,20 m / 1.360 kg Hydraulic outreach: 820 cm No. of hydraulic boom extensions: 2 Remote co... more
1
Siemens keyboard for Siemens 6FC5203-0AB11-0AA0 flat panel OP 031, keyboard 570578.9101.01 + 570585.9101.00 consists of Siemens, used, normal wear, 100% functional, included with com. photos Bd9jcedp8d more
4

Stacker GH 5031.30

Remshalden, GermanyGermany dealership location
17994 km
used
Vehicle data - make: Baka - type: GH 5031.30 - transmission: manual - load capacity: 3500 kg - load Centre of gravity:-lifting height: 260 mm - range: 0 mm - built: 0 - hours of operation: 0 - internal No.: 1700-452 _ ____ Mast data - mast type:-lifting height: 260 mm - height: 0 mm - free lift: 0 mm - carriage: 0 mm - forks: 1500 x 1600 x 0 mm _ Dimensions - length: 0 mm - width: 0 mm - height: 0 mm - weight: 0 kg _ Bcumu0nqzb Battery & charger - battery voltage: 0 V - battery AH: 0 A... more
4

Double Column Drawing Press -Hydr. MÜLLER ZE 800-31.1.2

Unterschleißheim, GermanyGermany dealership location
17859 km
1972
used
pressure 800 t distance between columns 3160 mm stroke 1100 mm distance table/blankh.,max. stroke up,adjustm. up 1900 mm table surface area 3100 x 1900 mm die-cushion pressure inside the table 300 t stroke of drawing cushion in table 400 mm die-cushion pressure in pusher 80 t stroke of drawing cushion in table 150 mm Beolarcsti ram surface 3100 x 1900 mm die-cushion in pusher hydraulic, controlled die-cushion inside the table hydraulic, controlled total power requirement kW weight of the mac... more
5

Sinumerik SIEMENS 6FC5103-0AB03-1AA2

Staufenberg, GermanyGermany dealership location
17967 km
used
Hj7vbrclw more
3

Hydroforming press SCHULER SHP 35000-3150/2150

Eislingen, GermanyGermany dealership location
17981 km
1998
used
pressure:3500 t distance between columns: mm stroke:900 mm Distance table / ram, stroke down:1000 mm distance table / ram, stroke up:1900 mm table surface area:3150 x 2150 mm ram surface:3150 x 2150 mm Total Weight of Tool max.:30,0 t Weight of Tool Top Part max.:20,0 t Qvkm9vqr speed down:400 mm/s working speed:0,9 - 9,2 mm/s Hydraulic Operating Pressure:280 bar oil volume:5500 l air pressure: bar rated current:760 A voltage:400 V frequency:50 Hz power requirement:425 kW weight:231,0 t Dimensi... more
5
100 t SPRITZGIESSMASCHINE for thermoplastic and thermoset, MAKE MANNESMANN DEMAG GERMANY, type ergo tech 100 - 310 compact, built 1995, Screw diameter 35 mm - 40 mm, Clamping force 100 t, opening path max. 500 mm, Tool clamping plates 580 x 590 mm, Ejector force 41.2 KN, weight 4200 kg, Qgbvgtgj IN 2015 PUMP RENEWED. Documentation, Software more
3
Indramat MDC 9.20B/SSA-0/S031 permanent magnet Gleichstromservomotor, serial number according to the photo, Ø shaft: 25 mm, supplied with gem. used, strong signs of wear, 100% functional, photos I22t3c2ns more
3
Sheet width 3050 mm Sheet strength 10 mm Bezf2g89tb Cut angle 2 ° Lift number 16 Hub/min Number of holders 16 pieces Table height 800 mm Table width 650 mm Total power demand 15 kW Machine weight about 10,600 kg Room requirements approximately 3740x2310x2150 mm Accessories: -2 pieces of loading arms -Angular attack -Sheet metal holding device more
4

Double Column Drawing Press -Hydr. MÜLLER ZE 800-31.1.1

Unterschleißheim, GermanyGermany dealership location
17859 km
1972
used
pressure 800 t distance between columns 3160 mm stroke 1100 mm distance table/blankh.,max. stroke up,adjustm. up 1900 mm table surface area 3100 x 1900 mm die-cushion pressure inside the table 300 t stroke of drawing cushion in table 400 mm die-cushion pressure in pusher 80 t Beola0tyhj stroke of drawing cushion in table 150 mm ram surface 3100 x 1900 mm die-cushion in pusher hydraulic, controlled die-cushion inside the table hydraulic, controlled total power requirement kW weight of the mac... more
5
Servomotor, electric motor, DC motor -max speed 6000/49 rpm -Output 0.52 kw Qpec0kx27 -Torque engine 1.15 Nm -Wave Ø 25 mm -Type B5 -Gearbox manufacturer SEW Eurodrive -Type RF27 AQH80 / 2 -Translation 1: 28,37 -Dimensions 410/140 / H140 mm -Weight 8 kg more
6
Column boring machine/stand boring machine BULMAK PK 031 Manufacturer BULMAK Type PK 031 Drilling power in steel: 32 mm Drilling power in cast: 40 mm Right-left run Nmweb Exoffload: 320 mm Drilling range: 255 mm Depulsals: 0.1-0.16-0.25-0.4 mm/u Cones: MK 4 Spindle speeds: 85-1500 u/min Table size: 500 x 500 mm Column diameter: 160 mm Coolant device Total performance requirement: 2.2 kW Machine weight: 0.734 tonnes L.B.H. 1100 x 650 x 2500mm more
5
110 t SPRITZGIESSMASCHINE for thermoplastic and thermoset MAKE MANNESMANN DEMAG GERMANY, type ergo tech 110 - 310 compact, built 1998, screw diameter 35 mm - 40 mm, Be3k3yurod Clamping force 110 t, opening path max. 600 mm, Tool clamping plates 670 x 670 mm, Ejector force 41.2 KN, weight 5500 kg, Documentation, Software more
2
Siemens 1FT60314AK713EG0 permanent magnet motor, used, 100% functional Berj2agwjo more
5
In an original condition and a good working machine, including software and extra accessories. Nnvxbkjy Working area: 1500 x 2000 mm Laserpower: 300W Laser source: CO2 ¨SEALED OFF¨ LASER Max. opbject height: 70 mm Max. acceleration: 15M/S² (2G) Processable materials: PMMA, acetates, ABS, plastics in general, micanite, wood, hide, paper and cardboard, textiles, marking on glass and marble (excluding PVC and polycarbonate), thin ferrous and not ferrous metals. more
4

Double Column Drawing Press -Hydr. MÜLLER ZE 800-31.1.4

Unterschleißheim, GermanyGermany dealership location
17859 km
1972
used
pressure 800 t distance between columns 3160 mm stroke 1100 mm distance table/blankh.,max. stroke up,adjustm. up 1900 mm table surface area 3100 x 1900 mm die-cushion pressure inside the table 300 t Cgdblhlg stroke of drawing cushion in table 400 mm die-cushion pressure in pusher 80 t stroke of drawing cushion in table 150 mm ram surface 3100 x 1900 mm die-cushion in pusher hydraulic, controlled die-cushion inside the table hydraulic, controlled total power requirement kW weight of the machi... more
2
Euro cooler TAEevo 031 / R407C - Special Pump CA 70/45; 1.1 kW SNr .: 2200 190 983 in addition to the already existing one high quality and extensive We have standard delivery considered: ***** Cooler has the power - Coloring:   Housing RAL 7035 "light gray"   Basic frame RAL 5013 "cobalt blue" - Refrigerant R 407 c - Special pump P5 - Reciprocating compressor - Atmospherically closed   Filling system attached Certification according to Eurovent *... more


hiab 031
daily

New machines via email!

Stay updated!

to

to

Edit search
HIAB 031
SELL IMMEDIATELY
with the world-wide market leader from 0,79 EUR per listing.
Find out more


Phone: +44 (0) 20 806 810 84
or sell immediately
Try our app for used machines now!
Machineseeker app for iPhone and Android.