Used Water Deaeration Plant for sale (9,527)

Condition: used, Year of construction: 1994, Three-stage water degassing system for water degassing and CO2 impregnation. The raw water enters the first degassing tank through an injector nozzle. The high flow velocity causes oxygen and nitrogen to be torn out of the water jet and escape from the top of the tank. This process is repeated in the second degassing tank. In the third tank (impregnation tank), after entering through the injector nozzle, the water is mixed with the CO2 pressure in the upper part of the tank, which is under impregnation pressure. Additional title: multi-stage cold deaeration with impregnation Pgsdpfx Ajxzqt Iod Sjn Base construction: mounted on stainless steel frame Features: 3 containers (each with pressure gauge); 3 centrifugal pumps; control cabinet with control panel; pipes with various fittings

Condition: used, Water degassing (deareation) system for removing oxygen from drinking water, mainly built in 1995. The system operates using a two-stage cold degassing process involving counter-current stripping with CO₂ and consists of the following components: - 2 degassing vessels connected in series - Vacuum pump with separator - 70 hl holding tank (Gross, 2018) for storing degassed water at up to 4 bar overpressure. - Centrifugal pumps - CO2 dosing via needle valve - Pipe panel, various pipework, valves, fittings, measurement and control technology - Control cabinet with Simatic S5 control system Capacity: 20000 l/h Gross volume deareation vessels each: 285 l ; overpressure up to 1 bar Gross volume buffer tank: 7060 l ; overpressure up to 4 bar Residual oxygen content appr.: 0,010 - 0,015 mg/l Operation / Control: Simatic S5 Material: stainless steel Position: mounted on stainless steel frame with feet Features: 2 x degassing vessels; pressure tank; centrifugal pumps; vacuum pump with separator; CO₂ dosing (via needle valve); flow, pressure and level measurements; switch cabinet; pipe panel; various pipework, valves and fittings Additional title: cold degassing via CO2-Stripping Pgodpfx Aoy Ti Anod Sjn

Condition: used, Effluent plant for waste water treatment. Includes: - Mixing and equalisation tanks 1, 140 m3 - Mixing and equalisation tanks 2, 40 m3 - Mixing and equalisation tanks 3, 80 m3 - Bioreactor 1, 240 m3 - Bioreactor 2, 240 m3 - 2 air compressors for aeration in the reactors - Secondary sedimentation tank 1, 100 m3 - Secondary sedimentation tank 2, 100 m3 - Thin sludge tank, 70 m3 - Thick sludge tank, 90 m3 - Sludge dewatering 1 and 2 - Precipitant tank, 25 m3 - Various process water pumps Bioreactor capacity 2 x: 240 m3 Podovcql Ropfx Ad Sjgn Operation / Control: Siemens Simatic S7 Features: Mixing and equalisation tank 1, 2 & 3; Pumping station 1 - inlet bioreactor; pumping station 2 - inlet bioreactor; bioreactor 1; bioreactor 2; pumping station - outlet bioreactors; 2 x air compressor; Precipitant tank; filling unit; 2 x flocculent mixing station; secondary sedimentation tank 1 & 2; mixing tank; thin sludge tank; 2 x sludge dewatering; thick sludge tank

Condition: used, Year of construction: 2016, Water treatment plant with semi-permeable membrane modules for desalinating pre-treated water. Reverse osmosis takes place via a two-stage process consisting of two pressure pipes, each with two membrane modules. The plant consists of: - Two pressure pipes, each with two membrane modules - Permeate blending and concentrate recirculation - Upstream fine filtration - Various sampling taps - Various measuring instruments for pressure, flow, temperature, conductivity and pH value - Flushing station with flushing tank and flushing pump - Chemical dosing stations for antiscalant and NaOH - High-pressure pump - Various automatic fittings - Control cabinet with touch display Additional title: Reverse osmosis for desalination of raw water Flow rate: 6000 l/h depending on the blending quantity Max. operating overpressure: 14 bar Recovery appr.: 82 % Water: 5-7 m3/h; 1-10 bar Operation / Control: Switch cabinet with touch display Podpeyxnffofx Ad Sogn Features: 2 pressure pipes, each with 2 membrane modules; sampling taps; fine filters; flushing stations; chemical dosing stations; high-pressure pump; automatic fittings; measurements of pressure, flow, conductivity, temperature and pH value;

Condition: used, Year of construction: 2007, Prominent water treatment plant, consisting of: 1. Softening: The raw water is fed into the double softener. Only one bottle is ever in operation and the other is in regeneration or stand-by. In the softener, calcium and magnesium are replaced by sodium. The system has a volume counter that switches to the other bottle when the preset quantity is reached. Regeneration takes place with saline solution from the brine tank. The value at the outlet is 0°dH. 2. reverse osmosis: Reverse osmosis fills the permeate tank with demineralised water, so-called permeate. Depending on the raw water quality, water temperature, condition of the membrane and correct setting, different conductance values and operating pressures result. The following flow rates are set during commissioning: Permeate 600 l/h, concentrate 200 l/h, corresponding to a yield of 75%. 3. permeate tank and ozonisation: The unpressurised 500 l permeate tank has an adjustable level control. For treatment with ozone, the water in the permeate tank is circulated via an adjustable ozone feed point. The ozone is generated from air in the ozone generation system by means of a silent electrical discharge and is available as an ozone-air mixture. The air and the undissolved ozone rise upwards in the permeate tank and are discharged via the residual ozone destroyer. A redox potential and ozone measurement is carried out after the centrifugal pump for monitoring purposes. The ozone dosage is set via the touch panel. You can choose between regulation via the redox potential or the ozone concentration. Additional title: Water softening, reverse osmosis system, ozone sterilisation Permeate output: 600 l/h Concentrate output: 200 l/h Ozone output: 5 g/h Max. working pressure: 16 bar Current: 2 A Voltage: 230 V Pedpfx Aew Uvdgod Sjgn Frequency: 50 Hz Water: < 5 bar (cooling water) Compressed air: 5,5 - 6,5 bar (max. 10 bar); max. 0,37 Nm³/h Operation / Control: Simatic S7-300, Touch Panel Position: free standing Base construction: Fully mounted on tubular frame with spherical feet Features: Reverse osmosis unit, reaction tank complete with residual ozone destroyer, ozone generator, ozone gas warning device, ozone and redox sensor, switch cabinets with control unit

Condition: used, Additional title: reverse osmosis Permeate capacity: 8000 l/h Feed: 10000 l/h Concentrate: 2000 l/h Max. overpressure: 16 bar Power: 6,5 kW Voltage: 3 x 380 - 415 V Frequency: 50 Hz Pjdpexzquljfx Ad Ssgn Water: feed 2,5 - 5 bar Operation / Control: Simatic S7-300 Base construction: mounted on stainless steel frame Features: sterilising filtration; two pipes with membrane modules; chemical dosing with two dosing pumps; centrifugal pump (Lowara); various pipes, valves and measurement technology; switch cabinet with touch panel

Condition: used, Year of construction: 2015, Electronically controlled dual system for softening particle-free water. With two pressurised tanks made of GRP. Freely adjustable cycles with time or quantity-controlled regeneration. With brine tank. Additional title: Double system with GRP tanks, Softening with a resin ion exchanger Pgodpew U D S Eefx Ad Ssn Operating pressure: 8 bar Operating temperature: 40 °C Voltage: 230 V Frequency: 50 Hz Material: vessels from GFK Features: Pre-filter, valve block, water meter, 2 x GRP tanks, various hoses

Condition: used, Additional title: with automatic regeneration Nominal flow: 9800 l/h Pressure working area: 6 bar pressure class: 8,5 bar Pedjw Tbunjpfx Ad Sjgn Operating temperature: 25 °C Ambient temperature: 35 °C Current: 0,35 A Voltage: 230 V Frequency: 50 Hz Weight: 390 kg Features: 2 x softening tanks (resin-filled); brine tank; valves and pipes

Condition: new, Year of construction: 2019, operating hours: 0 h, machine/vehicle number: 20928, Burkhalter water treatment plant (state of the art, Swiss top quality) Pgjdpep Hf Idjfx Ad Sjn - Brand new (the unit has never been installed) - Please consult the attached PDF catalog: There you will find a detailed description of the plant as well as an extensive photo gallery (starting on page 8).

Year of construction: 1996, condition: good (used), Offer: Drinking water treatment plant Water treatment plant 120 cubic meters/hour Year of manufacture: 1996 Podpfx Aehr D Hnod Sogn Fully functional Housed in a 6m container Control system and pumps included. Previously used to supply a container village.

Year of construction: 2006, condition: like new (used), Details on request Pgjdsfla Emepfx Ad Sen

Year of construction: 1999, condition: good (used), For sale is a water treatment plant of make ENVOTECH and type 0320 from 1999. In 2016 a new reaction tank of the brand Leiblein, made of stainless steel, with the dimensions of 500*500*400 mm was added. The plant is fully functional and the contact details of the competent service technician are available and can be forwarded at the time of purchase. Technical data & information: - Executed in stainless steel - Including oil separation by coalescence principle - Including automatic cleaning - Built-in pump for waste water, concentrate and distillate - Frequency control of the compressor motor - Type: 0320 - Rated capacity l/h: 320 Energy consumption - In operation: 25 kW Pgsdepl Tqtspfx Ad Sen - Maximum power: 35 kW Supply voltage: 3*400 V - 50 Hz Dimensions lxwxh: 245x155x265 Face: ca 2600 kg Sound pressure level: 75 dB All data refer to operation with water On request, loading and shipping can be organized throughout Europe. Prices plus VAT Viewing by appointment possible. Contact us, our team is happy to help you. Ch3mj0l3eg Trade-in or exchange possible! Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES ETC. Do you need a high quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For more information or to contact us please visit our website

Condition: ready for operation (used), Year of construction: 2018, Inlet medium: AP water, outlet medium: distillate, distillate outlet temperature: approx. 99°C, tank volume: 900l, number of preheaters/evaporator columns: 3/4, distillate production: 300l/h, pure steam production: approx. 70kg/h, operating modes: distillate production/pure steam production/WFI loop system sterilization, controls: Siemens SPS S7-300. The distillation unit was designed as part of an overall system but has its own control and automation and can be operated separately. Documentation available. An on-site inspection is possible. Podpfx Adeygmcdo Segn

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, machine/vehicle number: B500-1091-05 / 705-05, operating temperature: 110 °C, water tank capacity: 1,500 l, Equipment: documentation/manual, TECHNICAL DETAILS Capacity: 400 l/h Volume: 1,500 dm³ MACHINE DETAILS Operating pressure: -0.025 bar / +0.49 bar Operating temperature: 0/110 °C EQUIPMENT With tank Piping Control cabinet Operating manuals Pgsdew Nn Slopfx Ad Sen

Condition: good (used), Emulsion separation system, oil-water separation system (for removing oil from condensate in compressors) The most cost-effective and permanently reliable solution to this problem is usually the separation of oil and water from dispersed condensate. The treated water meets the legal requirements for discharge into the sewer system. Pgsdegvu Tgopfx Ad Ssn

Condition: new, Year of construction: 2025, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, pressure: 70 bar, total height: 1,600 mm, total width: 800 mm, total length: 1,200 mm, temperature: 40 °C, operating pressure: 70 bar, noise level: 80 dB, Equipment: documentation/manual, rotational speed infinitely variable, RO 510-DT2-15S – Compact Seawater Reverse Osmosis System, approx. 15,000 L/day Potable Water Compact, fully automated reverse osmosis system for the production of hygienic drinking and process water from natural seawater. Ideal for maritime applications, island supply, hotels, as well as small-scale industrial and utility operations. Technical Specifications Type: RO 510-DT2-15S Process: Reverse osmosis with Disc-Tube (DT) technology Permeate Output: Approx. 15,000 L/day (15 m³/day, depending on operating conditions) Feed Water: Seawater with high conductivity, approx. 55,000 µS/cm (high salinity) Permeate Quality: Drinking water, approx. 500 mg/L residual minerals (reference value) Recovery Rate: Approx. 30% (typical operating range) at 55,000 µS/cm conductivity Design Temperature: Approx. 25°C (Operating range: approx. −2 to 35°C) Process Technology & Configuration DT module with open feed channel – highly fouling-tolerant and fully cleanable Mechanical pre-filtration (high-performance filter + 10 µm cartridge filter) Chemical pre-treatment of feed water (acid dosing) generally not required Integrated rinsing and CIP (clean-in-place) function, PLC controlled Skid-mounted on stainless steel frame (AISI 316) High-pressure lines in stainless steel, low-pressure section in seawater-resistant plastic Pumped seawater components made from corrosion-resistant materials Operating & Energy Data Pgsdjw Uf Ihepfx Ad Sjn Feed Water Flow: Approx. 1,000 L/h (reference value) RO Module Operating Pressure: High pressure range, designed for seawater desalination Power supply: 230 V, 50 Hz, single phase Connected load: Approx. 6 kW Control, Monitoring & Safety Local operator panel with integrated PLC control Monitoring of pressures, flows, conductivity, and operating hours Automatic shutdown in case of: - Insufficient feed pressure - Exceeding permissible operating pressure - Overpressure in permeate/concentrate lines - Exceeding defined conductivity limits (with automatic redirection to drain) Automatic “Stop & Rinse” function: Permeate flushes all seawater-contacted components on shutdown, reducing fouling during system standby Dimensions & Weight (Skid) L × W × H: Approx. 1,190 × 705 × 1,500 mm Weight: Approx. 530 kg (dry), approx. 605 kg (operating) Typical Applications Vessels, offshore platforms, ports Island and coastal supply Hotels, resorts, small industrial and utility operations Backup or peak load system for existing potable water production Additional technical documentation, photos, and information on scope of supply, pricing, and availability are available on request.

Condition: new, Year of construction: 2025, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, pressure: 12 bar, operating pressure: 12 bar, overall weight: 2,000 kg, compressed air connection: 6 bar, Equipment: documentation/manual, RIEFILT Ultrafiltration System UF 25/10 – 25 m³/h High-Performance UF for Industrial, Process & Drinking Water Compact, fully automatic ultrafiltration system for the treatment of river, well, or process water with a capacity of up to approx. 25,000 l/h. The UF 25/10 reliably removes suspended solids, bacteria, microorganisms, and colloids, providing consistently clear filtrate—ideal as a stand-alone treatment unit or as a high-quality pre-treatment stage for RO systems. Typical Applications - Process water treatment in industry and commercial sectors - Filtration of river, surface, and well water - Premium pre-filtration for reverse osmosis systems (extends RO membrane service life) - Drinking water purification for industrial, municipal, or containerized solutions - Recirculation and polishing of industrial and rinse water Wherever secure water quality, high availability, and stable operating costs are required, this system excels. Technical Specifications (Summary) - System type: RIEFILT UF 25/10 - Capacity: up to approx. 25 m³/h raw water, approx. 23.5 m³/h nominal capacity - Membranes: 10 × PVDF ultrafiltration modules - Operating pressure: approx. 1–3 bar (energy-efficient low-pressure operation) - Temperature range: approx. 0–40 °C - Power consumption: approx. 12.5 kW (base), approx. 15 kW incl. CIP module - Design: Stainless steel skid, industrial-grade piping and tanks - Designed for automated continuous operation, containerized, and modularly expandable System Concept & Operation Pgedpfxswnbxds Ad Ssn - Pre-assembled skid system—plug & play, quick integration into existing setups - Automatic backwashing and CIP cleaning for minimal downtime - Freely programmable control, user-friendly operation, and clear process visualization - Low chemical consumption, optimized membrane lifespan, robust industrial construction Benefits for the Operator - High operational reliability: stable filtrate quality even with fluctuating raw water quality - Reduced OPEX: energy-efficient operation, automated cleaning, minimal personnel requirements - Flexible integration: as a stand-alone solution or high-end pre-treatment stage for RO / further processes - Future-proof: ideal for system expansions, container concepts, rental or multi-line solutions If interested, I am happy to provide the detailed technical datasheet, layout drawings, and a customized offer tailored to your application, including pricing and delivery terms. Please contact me directly via Machineseeker for further information, project discussions, or to arrange a viewing.

Condition: ready for operation (used), Year of construction: 2020, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, temperature: 35 °C, operating pressure: 75 bar, energy consumption: 64 kWh, Industrial plant for the treatment and concentration of process water as well as for nutrient recovery. Pgjdpfjyr H Ansx Ad Sen The plant combines a double-pass reverse osmosis (RO) system with a thermal evaporator unit and was originally developed for biogas production to recover ammonium-containing fertilizer from process water and digestate. The plant was never commissioned due to the operator's insolvency and is in a preserved condition. The system is suitable for operators from the industrial, environmental technology, or agricultural sectors who are looking for a rapidly available solution for water treatment, ZLD (Zero Liquid Discharge), or nutrient recovery. Technical data System type: RO Double Pass + Evaporator Model: SIMPEC RO Double Pass 8000 44 8 Evaporator 57 000 Year of construction: 2020 Permeate output: Stage 1: 7.5 m³/h Stage 2: 6.7 m³/h Permeate quality:

Condition: good (used), Year of construction: 2009, Section of Double-Stage Reverse Osmosis able to treat about 60 mc/g of product Psdpfx Ajtv Drlod Sjgn

Year of construction: 2009, condition: good (used), Section of tubular ultrafiltration able to treat about 36 mc/g of product Pgjdpfx Aetv Dx Eod Son

Condition: new, MOBILE CONCRETE BATCHING PLANT M100-TWN GENERAL Plant Type : MOBILE Concrete Plant with TWIN SHAFT MIXER Plant Capacity : 100m³/hour freshly compressed concrete Mixer Capacity : 3000/2000 lt (2m³ Compressed Concrete) Total Motor Power : 143kw Standard Value can be changed depending on Equipment.. Voltage/Frequency : 380V/50Hz Standard Value. The installation and startup of the plant is under our responsibility. We provide excellent after-sales service. 24/7 SERVICES. REMOTE CONTROL SERVICE. Exporting more than 1000 Concrete Batching Plants to more than 90 Countries all over the world. * HIGHLY EFFICIENT AND DUPLICATE PRODUCTION * EASY TRANSPORTATION * MINUMUM INVESTEMENT FOR FIELD GROUNDWORK * QUICK INSTALLATION DETAILS: Crjbtuhm Njflz Hlo Aeb Compacted concrete capacity: 100 m³/h Air Compressor Capacity : 950 lt/min Aggregate Hopper : 4 Bins : 4×11.25 = 45 m³ Pjdpfswhybdjx Ad Ssgn Mixer Type : TWIN Shaft (2 m³). 3000/2000 lt capacity Mixer Converyor Band : 1000 mm * 13000 mm Weighbridges: Aggregate/ Cement /Water/ Additives

Condition: new, functionality: fully functional, fuel type: hybrid, color: other, overall weight: 50,000 kg, Year of construction: 2026, *All of our products are made with care and covered for 1 year warranty! *Installation and Operator Training FREE Fabo tracked impact crusher FTI-110s is a complete mobile system which moves on hydraulicly driven tracked system with 1 km/h speed and combination of a vibrated grizzly feeder, an Impact crusher, foldable stockpile conveyors, control unit and electric generator. Psdpfx Aezhi U Ded Sjgn In today's conditions and technological processes, businesses are beginning to think about how to make their field of activity more efficient. As they make it more efficient, they always take into consideration factors such as the operationality of the machines they use, their low cost and staffing needs. Our Tracked Crushers can crush with high performance even on the most demanding mine sites with its specially designed body and compact structure. Customization can be done to our tracked systems by Jaw Crusher, Primary and Secondary Impact or Cone Crusher. Advantages of Tracked Crushers; -Heavy-duty walking trackes can reach places where ordinary machines can not reach. -It has the appropriate dimensions and sound level to crush construction waste in the city. -The fuel consumption of the generator and walking track units are very economical. -System maintenance and management is very easy with latest technology control software. TECHNICAL SPECIFICATIONS: Model: FTI-110s Production Capacity: 130-240 tons per hour Maximum Feeding: 500 mm Crusher Type: Impact Crusher SIZE: 1100x1000 mm CSS Setting: 0-50 mm Total Power: 360 kva Vibrating Screen: 1500x2700 mm Weight: 50 tons Dimensions: 2900x3180x14760mm - Low investment and operation cost – Zero substructure preparation – Easiness at usage and maintenance – Easy assembly and disassembly FOR FURTHER INFORMATION PLEASE FEEL FREE TO CALL US!!!

Condition: new, functionality: fully functional, fuel type: electric, color: other, Year of construction: 2026, The bunker of the PRO-150 Mobile crushers has been developed by our engineers as user-oriented to operate with high-level efficiency. The vibration speed of the vibrating feeding bunker is easily guided by the automation system which can be adjusted manually. This feature prevents the bunker from wearing out and provides the user with longer and more efficient usage. In order to avoid any performance loss due to the damp or muddy material processed in the crusher plants, the wobbler feeder contains all the necessary qualities. While the wobbler feeder has potential to process without any problems for many years. Aslo stands out with easy maintenance feature as well. The poor quality of material separated in the wobbler feeder is thrown into the bypass belt and therefore user get a high-quality final product. Additionally; if desires, the materials falling into the bypass can be sent directly to the screen thanks to the reversible conveyor in the bypass system under the wobbler feeder. FABO primary impact crushers are designed to crush soft and medium hard stones with high rotor speed. It is considered as the heart of the mobile system. With the help of high-speed rotating rotor crushing hammers, the products poured from the feeder are crushed with the help of pallets. Hydraulically adjustable rods allow the products to be obtained in the desired size. FABO folding type hydraulic belts send the right product to the crusher and the stock area according to customer requests after sorting through the vibrating screen. With foldable structure, the plant minimizes dimensions of the machine for the transportation. The number of stock belts can change due to customer requests. 10 mm EP 125 4-ply belt elastics moving on twisted sheets perfectly transport the aggregate coming out of the screen to the area desired by the user. Belt elasticity, which produced resistant to wear, offers many years of life without letting customer down. The flap system is a special system that allows the directly crushed material to be taken from the crusher with the help of the pre-stock belt without being screened in the mesh. The plant minimizes production time with its unique location just in front of the screen. Psdpfozhi Uqox Ad Ssgn

Condition: new, functionality: fully functional, power: 400 kW (543.85 HP), fuel type: electric, color: dark red, overall weight: 38,000 kg, axle configuration: 2 axles, brakes: other, Year of construction: 2026, Mobile vertical shaft crusher is a specially designed mobile stone crushing screening plant on a portable double axle chassis, consisting of feeder bunker, VSI 900 Vertical shaft impact crusher, vibrating screen and conveyor belts. It can be fed directly with the material in stream areas or it can produce sand and gravel from the sieve material in the crushing plants. The GNR - MVSI 900 Vertical Shaft Crusher that gives this facility its name; - Maximum feeding size 50-55 mm - Rotor size 900 mm - Engine power 2x200 kW Pgjdpfx Aewnp Aked Sen - The capacity 80-210 tons per hour. For more information please call us.

Year of construction: 2026, condition: new, FABO Mobile Scalper screen is produced for aggregate producers who require higher productivity and versatility. The machine can be used for multiple purposes; it can be used as a heavy-duty incline 2 deck screen, capable of stockpiling, scalping before and after crushing units, or it can be used a standalone system as well. That is why FABO tracked mobile scalpers can separate the hardest materials. FABO Mobile Scalpers helps our customers to maximize productivity while on the other hand helps on reducing the production costs. Pgjdpfjzfp Dasx Ad Ssn - - - Technical Specifications of the Tracked Scalper Screen: - *Bunker capacity :7m³ - *Production capacity : 220 – 400 Tons per hour - *Vibrating Screen Size : 1530x4800 mm - *Total Power : 110 kvA - *Weight : 31.000 kg - *The screen angle varies between 18-27°.