Used Wastewater Pre-Treatment Unit for sale (41,181)

Year of construction: 2013, condition: used, functionality: fully functional, FOR SALE: WASTEWATER PRE-TREATMENT SYSTEM Due to the expansion and relocation of our winery, the wastewater pre-treatment system, belonging to the ÉSE series of Élinvest Kft., is now available for sale. The system operated flawlessly from 2013 to 2024 with regular maintenance. Technical specifications: Untreated raw wastewater enters an oversized sump below the filter unit, from where a transfer pump with a capacity of approximately 25 m³/h conveys it to the pre-filter unit. The system filters the technological wastewater generated during operation through a Ø1 mm filter screen within 10 minutes of its generation, in automatic mode. Fedpfx Aloz Eiigo Aegh Solid materials larger than 1x1 mm are collected in a 240-liter, covered plastic container, while the water phase containing dissolved and suspended solids flows by gravity to a transfer well that also collects municipal wastewater. After the completion of the harvesting operations, the wastewater discharge rate decreases to 20-40% of the harvesting water flow. This water is usually acidic; therefore, the discharge pH can be adjusted by adding a solution of sodium hydroxide (20-30% concentration). A pH control unit, suitable for dispensing both acid and alkali, maintains the pH of the treated wastewater within the specified limits (5.5 and 10). The operation and control are performed by a pH probe and a custom electrical control panel. The rotating drum of the filter unit is cleaned with a rotating brush and an intermittently operating pressure booster connected to a water supply with a minimum pressure of 4 bar. The construction technical approval number for the filter system is ÉME É-61-2011. The average wastewater discharge is 3-10 m³/day. The maximum instantaneous wastewater flow is 10 m³/h, and 25 m³/h in case of an emergency.

Condition: good (used), Ultrafilter ultraaqua autoclean 0016 AC Donaldson Ultrafilter ultrafiltration system for compressed air compressor condensate Oil/water separator for compressed air condensate ● Treatment system for separating compressed air condensate and condensates with difficult separation properties (e.g., stable emulsions) using cross-flow filtration. ● Physical separation principle guarantees residual oil content of < 5 mg/l in water. ● Intelligent control concept with programmable controller for safe system operation, including plain text display via a text display, fault monitoring via alarm messages with potential-free contacts and optional external network connection. ● Optimized cleaning by comparing input/output, which extends cleaning intervals and saves operating costs. ● Thermally and chemically highly resistant ceramic membrane with a long service life. ● Frost protection with integrated heater. ● High-quality, corrosion-resistant materials for tanks, pipelines, pumps, seals, and valves. Manufacturer: Donaldson Ultrafilter System type: ultraaqua autoclean 0016 AC Electrical data: 3 x 380 V, 50 Hz, 2.6 kW Compressed air: pmin: 5.5 bar, pmax: 8.5 bar, Pneurop 4 Fgedoidx Uispfx Al Ash Water: pmax: 5 bar Membrane: pHmin: 1, pHmax: 11, tmin: 5°C, tmax: 70°C You can find other filtration systems in different sizes – new and used – in our shop! International shipping costs available upon request!

Condition: good (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: 104605-104645, input voltage: 400 V, total width: 1,500 mm, total length: 4,500 mm, total height: 2,820 mm, type of input current: three-phase, Fortuna Primus K4 – 4-row roll divider – rounder + depositor + GEK, year of manufacture 2011 Dough divider & rounder Condition: fully functional, directly from ongoing operation Application: round rolls, e.g., Kaiser rolls, braided rolls, salt rolls, wheat & mixed doughs • Weight range: approx. 40-110/120 g • Hourly output: approx. 4,800 pieces/hour • Rounding chamber height: approx. 10–35 • Rounding speed: scale 0–30 • Hopper volume: 20–25 kg • Dough yield: TA 160–165 • Connection power: approx. 1.5 kW • Machine weight: 650–700 kg • Depositor: for 60 × 80 cm trays (58–78) _____ Equipment • Fortuna Primus K head machine • 4 rows • GEK pre-fermentation cabinet matching the line • Rounding/stamping sets: Kaiser rolls, braided rolls, salt rolls • Complete depositor Fjdoy St U Sopfx Al Aegh • Immediately ready for operation • In use until recently • Clean, well-maintained, regularly serviced • No known defects • Electronics modernized (new display) INSPECTION and TRIAL RUN possible (only) by appointment Freight possible, fully assembled with a jumbo truck (L/W/H = approx. 4,500 mm x 1,500 mm x 2,820 mm)

Condition: excellent (used), Year of construction: 2024, For sale: Professional water treatment and preparation unit – UWS Heaty Profiline 100 No 2. This is a mobile device designed for use in heating systems, water installations, and HVAC service. Perfect for flushing, filling, and treating installations. Fgsdpsyz Dhzjfx Al Ajh Equipment is in excellent technical condition, fully complete and ready for operation. ⚙️ Technical data: Manufacturer: UWS Technologie GmbH Model: Heaty Profiline 100 No 2 Year of manufacture: 2024 Power supply: 230 V / 50–60 Hz Power: 0.5 kW Weight: approx. 59 kg Max. operating temperature: 80°C Max. pressure: 6 bar 🔧 Equipment features: - Integrated tank - High-quality EBARA pump - Flow meters - Pressure gauges - Control valves - Mobile transport trolley - Documentation and accessories (as seen in the photos) 🔍 Condition: - Used device - Very good technical condition - Minor, normal signs of use - Fully complete ⚠️ Remarks: - One pressure gauge has a damaged housing/cover (visible in the photos) - Operation of this pressure gauge has not been checked - The part can be easily replaced if needed 📦 Applications: - Heating installations - Water installations - Service and cleaning of installations - HVAC systems 🚚 Delivery: - Pallet shipping available - Collection in person possible

Condition: good (used), functionality: fully functional, High-quality industrial wastewater treatment system specifically designed for powder coating and metal finishing facilities. This system efficiently treats process water generated during pre-treatment, rinsing, and cleaning operations. It helps reduce operating costs, minimizes environmental impact, and supports compliance with environmental regulations. Key Features: Suitable for powder coating and surface treatment lines Efficient removal of heavy metals, suspended solids, oils, and contaminants Reliable and robust industrial design Low operating and maintenance costs Easy operation and maintenance Ideal for continuous industrial use Complete installation available, including tanks, pumps, piping, dosing system, and control panel (depending on configuration) The system is in good working condition and can be inspected while operational by appointment. Fgodpfezi N Dhox Al Aoh Please contact us for technical specifications, additional photos, or a customized quotation. Worldwide shipping can be arranged.

Condition: excellent (used), Year of construction: 2024, operating hours: 6 h, functionality: fully functional, Manufacturer: Spaleck Oberflächentechnik Model: Z1 Year of manufacture: 2024 Used, like new condition Operating hours: 6 h Technical data according to the manufacturer: Working container volume: 11 l Usable volume: 7 l Turntable speed: approx. 280 rpm Drive power: 0.75 kW Height of working container: 1,000 mm Operating voltage: 400 V, 50 Hz Fgedoz H Rfxopfx Al Ash Dimensions (W x D x H): approx. 530 x 950 x 1,350 mm The system has been dismantled and is stored at our facility. An inspection is possible by appointment.

Condition: new, Year of construction: 2026, functionality: fully functional, warranty duration: 12 months, workpiece weight (max.): 100 kg, power: 88 kW (119.65 HP), temperature: 220 °C, heating capacity: 30 kW (40.79 HP), workpiece height (max.): 1,500 mm, workpiece length (max.): 500 mm, insulation material: Steinwolle, insulation thickness: 150 mm, workpiece width (max.): 500 mm, Semi-automatic powder coating system | Batch system with chemical pre-treatment & curing oven Compact, semi-/partially automatic batch powder coating system for steel components (1,500 x 500 x 500 [mm]). Complete system including 2-chamber spray tunnel (degreasing/phosphating/rinsing), flash-off oven, mobile powder spray booth, curing oven (max. 220°C), cardan chain conveyor, and PLC control. New system / project proposal – special dimensions, heating types, layouts, etc. can be individually adapted to customer requirements. System concept & customer-specific customization: Semi-automatic powder coating system in batch mode for the efficient coating of steel parts. The system combines a compact footprint with high throughput and is ideal for small to medium-sized series components. The pre-treatment process is automated in batch mode, and the coating is applied manually. Note on design: The dimensions, assemblies, and heating types listed below correspond to the indicative offer presented. All components (e.g., useful lengths, booth dimensions, chain path, gas instead of electric heating) can be fully customized to your specific component dimensions, space requirements, and process requirements. - Max. component dimensions (standard indicative offer): 1,500 x 500 x 500 [mm] (variable) - Max. load capacity per carrier: 100 kg per batch (higher load capacities on request) - Space requirement / footprint: approx. 12,000 x 6,500 [mm] (layout can be flexibly adapted) - Total connected load: approx. 88 kW (max.) - Batch cycle time / feed rate: Batch dwell time approx. 8.5 - 12 min at a chain speed of 3.2 m/min Technical data (overview of indicative project) System type: Semi-automatic batch system Max. workpiece size: 1,500 x 500 x 500 [mm] (individually scalable) Load capacity / carrier: 100 kg (higher loads can be designed) Oven temperature: max. 220/250°C; operating temperature 180-200°C Heating for dryer/oven: Gas, oil, or electric (indirect) Max. power consumption: 88 kW (depending on system size) Control: PLC (e.g. Siemens) System components overview: Fodpfjulwg Njx Al Asgh Chemical pre-treatment (3-zone spray cleaning): Compact 2-chamber spray tunnel made of stainless steel for degreasing/phosphating (or alternatively nanoceramic) (40 - 45°C) as well as 2-stage rinsing. Complete with stainless steel pumps, PPR nozzle bars, and extraction (4,000 m³/h). Flash-off oven & powder curing oven: Two thermally insulated chambers (100 - 150 mm rock wool) with indirect electric heating (thermoblock with 16 or 30 kW), stainless steel combustion chambers, and powerful air circulation. Dryer up to 120°C, oven up to max. 220/250°C (automatic lift-up doors optional) Mobile powder spray booth: Mobile, open coating booth (2,000 x 2,100 x 2,200 [mm] with ATEX extraction (6,000 m³/h). Integrated filter unit with 4 pulse valves for cleaning, absolute after-filter, and mobile 60 l powder container. Note: Fully enclosed powder booths are also available! Conveying technology & control: Driven cardan chain conveyor with frequency inverter and automatic lubrication unit. Control via PLC for complete control and adjustment of all system processes (control cabinet equipped with Siemens/Schneider) Scope of supply: Complete system including customer-specific design, assembly, and on-site training.

Condition: used, Unit construction kit, format processing unit, cutting unit, milling unit, profile milling unit, jointing milling unit, trimming unit, double-end profiler, edge processing machine, scoring motor, chipper motor, milling motor for edge processing machine -HOMAG milling unit allows you to pre-mill the upper and lower edge overhang -with keying: from 1 side each -1x engines Perske -Power: 1.125 kW -Voltage: 165 volts -Frequency: 300 Hz -Speed: 18000 rpm -1x engines Perske -Power: 1.5 kW -Voltage: 165 volts -Frequency: 300 Hz -Speed: 18000 rpm Fjdpfx Aeb Uhvcol Aogh -Other engines with other services in stock for an additional charge -Dimensions: 500/340/H600 mm -Weight: 50 kg

Condition: used, Year of construction: 2017, functionality: fully functional, input voltage: 400 V, input current: 16 A, total width: 1,400 mm, total length: 1,500 mm, machine base height: 1,400 mm, overall weight: 350 kg, Hello, I am offering a used Corona / Plasma treatment system for sale. The material to be treated is placed on a conveyor belt. Sensors automatically activate the plasma / corona discharge when the substrate is positioned beneath the head. The feed speed is adjustable. The conveyor belt has a width of 650 mm. The system is mounted on casters, making it mobile. An exhaust fan is also installed and only the exhaust air needs to be ducted outside. This system is ideal for treating the surfaces of plastic materials or glass to improve printability. It is also suitable for the pretreatment of materials to enhance adhesion for bonding. If you have any questions, please feel free to contact me. Fedpfoy A Trlsx Al Ajgh

Condition: as good as new (ex-display), Year of construction: 2026, Parts cleaning machine / combination spray cleaning system, type L101 HP Automatically operated hot water parts washing machine with basket drive via gearbox motor, stainless steel washing pump (manufacturer: Lowara), spray system with stainless steel nozzles Fgsdpfx Asd R Ahlsl Ash Additionally, manual cleaning with high-pressure nozzle (60 bar) and foot switch, air blow-off gun, large viewing window with gauntlet gloves, LED interior lighting - Basket diameter: 910 mm - Usable height: 490 mm - Max. load weight: 200 kg - Spray pressure (washing pump): 2.3 bar - Spray pressure (HD pump): adjustable up to max. 60 bar - Tank volume: 175 liters - Heating: electrically adjustable (room temperature - 60°C) - Machine dimensions (L x W x H): 1,300 x 1,500 x 2,100 mm - Empty weight: approx. 200 kg ++Wash cycle timer freely adjustable (minutes and hours) ++Complete cleaning machine (internal components and external housing) made of ++stainless steel 1.4301 ++Water circulation and loading basket made of stainless steel 1.4301 ++Bath cover with fine filter (2,000 microns) ++Operating hour counter ++Steam extraction with condensate return ++Omron timer for time setting in seconds/minutes/hours OTHER BASKET DIMENSIONS AVAILABLE UPON REQUEST!!!

Condition: good (used), Kistler NC Joining Module with Dual Station/Spindle Unit Kistler NCFH 60 Servo Press with Feed Slide & Spindle Station The Kistler NCFH 60 NC Joining Module is integrated into an industrial dual station/spindle unit for automated series production (e.g., friction welding or precision pressing). The system is characterized by its high precision, integrated force-displacement monitoring (piezoelectric sensors), and an extremely robust design for industrial continuous operation. Precise Pressing and Joining: Ideal for highly accurate assembly processes in the automotive industry, electrical manufacturing, or general mechanical engineering. Integrated Quality Assurance (Force-Displacement Monitoring): Thanks to the built-in piezoelectric sensors, the module measures the exact tensile and compressive forces acting during the pressing process, depending on the position. Flexible Process Control: Enables advanced functions such as "joining on block," position-controlled pressing, or force-controlled joining (in combination with a suitable controller, e.g., Kistler maXYmos). Automated Workpiece Clamping: The attached spindle station features an automated clamping function (pneumatically/hydraulically actuated via integrated cylinders), perfect for automated series production and assembly lines. Stable Machine Bed: The entire mechanism is mounted on a heavy, welded steel frame to withstand the enormous forces (up to 6 tons per side) during operation. Manufacturer of Joining Module: Dr. Staiger Mohilo+Co GmbH / Kistler Group Type: 2151B 60304002 Model: NCFH 60 400 300 B H C G Nominal Force: 60 kN (corresponds to a pressing force of approx. 6 tons) Fgedpjzcpnzsfx Al Aeh Max. Total Spindle Stroke: 400 mm Max. Traverse Speed: 300 mm/s Motor Type: AC Servo Hollow Shaft Motor (165H-180E) Holding Brake: 18 Nm Certification: CE Marking Scope of Delivery: Kistler NCFH 60 Joining Module including mounted flange coupling, yellow slide/feed guide, complete sensor cabling, and the associated spindle clamping station and the maXYmos process monitoring system. "One-stop shop: We would be happy to offer you suitable bank financing for your project." You can find more new and used items in our shop! International shipping costs on request!

Condition: used, Coolant Filtration Unit,Coolant treatment unit, Industrial Liquid Filter System, LOSMA Spring F3, Used Machine Manufacturer: Fgsdozgh S Sspfx Al Ash LOSMA S.p.A. (Curno, Italy) Model: SPRING F3 Overall Dimensions: Width: 2050 mm Depth: 1020 mm Height: 1350 mm Technical Specifications: Manufacturer (Main Unit): LOSMA S.p.A. (Curno, Italy) Series / Model: SPRING F3 Year of Manufacture: 2005 Serial Number: 0001 Control Panel Manufacturer: effegi impianti s.r.l. (Industrial Electrical Distribution & Automation) Power Supply: 380 V, Three-phase Maximum Current: 16 A Control Voltage (Auxiliary): 24 Vac / 24 Vdc Protection Rating: IP65 (Dust-tight and protected against water jets) Standard: CEI 17-13/1

Condition: used, Year of construction: 2018, functionality: fully functional, input voltage: 400 V, input current: 21 A, input frequency: 50 Hz, type of input current: three-phase, workpiece height (max.): 50 mm, edge thickness (max.): 3 mm, feed rate X-axis: 7 m/min, actuation type: electric, total height: 1,500 mm, total length: 3,200 mm, total width: 1,100 mm, overall weight: 650 kg, Equipment: CE marking, documentation/manual, – Made in Italy – Year of manufacture: 2018 – Preliminary milling – Technical documentation, CE marking TECHNICAL SPECIFICATIONS: – Edge thickness: 0.5 - 3 mm – Wood veneer thickness: 0.5 - 5 mm Fjdpfx Alozzzr Ie Aogh – Element height: 8 - 50 mm – Minimum edging length: 160 mm – Minimum panel width: 110 mm – Feed rate: 7 m/min – Operating temperature: 190° - 220° – Preliminary milling – Glue application roller – Guillotine for preliminary edge trimming – Saws for final edge trimming (front/rear) – Milling (top/bottom) – Radius edging – Straight edging – Polishing units – Air blow for each unit – Operating pressure: 6 - 8 bar – Table height from base: 900 mm – Nozzle diameter: 2x 60 mm and 2x 80 mm – Transport dimensions (L/W/H): 320 / 90 / 150 cm – Weight: ~650 kg

Condition: used, Year of construction: 2016, For Sale: Complete TU premix bunker installation with accessories. Included: - 5 premix bunkers, micro-dosing system, dosing system 1400 liters per storage tank - 1 micro-dosing system with 5 storage tanks - dust extraction system - other components from Technology Unlimited It has been disassembled, but it is possible to view a similar, operational installation at our location. Fgedpfx Alezlt S Io Aeh The installation can be viewed on-site.

Condition: used, Year of construction: 2016, functionality: fully functional, type of input current: AC, overall weight: 5,180 kg, workpiece weight (max.): 1,800 kg, input current: 46 A, input voltage: 400 V, C.M. Wheel Blast Machine T18 H850 (Year of Manufacture 2016) Product Description The C.M. Surface Treatment T18 H850 is a high-performance wheel blast machine for the economical surface treatment of workpieces. The machine is suitable for descaling, decoring, cleaning, and surface preparation prior to painting or coating. The rotating table system allows a wide variety of workpieces to be blasted evenly. The robust design and powerful turbine enable high processing quality while simultaneously ensuring efficient abrasive consumption. The system features an integrated abrasive processing system with separator, cyclone extraction, and filter system. This ensures that the abrasive is continuously cleaned and reused. Electrical Data Feature | Value Mains Voltage | 400 V Phases | 3 Frequency | 50 Hz Maximum Power | 27.78 kW Installed Total Power | 24.82 kW Operating Current | 45.46 A Working Area Feature | Value Max. Workpiece Diameter | 1,800 mm Max. Workpiece Height | 850 mm Max. Workpiece Weight | 1,800 kg Wheel Feature | Value Power | 7.5 kW Wheel Diameter | 334 mm Number of Blades | 6 Peripheral Speed | 30–70 m/s Abrasive Feature | Value Usable Grain Size | 0.1–2.0 mm Maximum Hardness | 62 HRC Initial Filling | 1,500 kg Average Consumption | approx. 500 g/kWh Filter System Feature | Value Suction Capacity | 60–150 m³/min Compressed Air Consumption | 7.2 Nm³/h Filter Area | 75 m² Filter Weight | 1,100 kg Machine Weight Feature | Value Machine Weight | 5,180 kg Unladen Weight (Base Machine) | 4,080 kg Noise Level Feature | Value Sound Pressure Level (Leq) | 83 dB(A) System Components The system consists of: Cabin with rotating table Wheel Sieve Bucket elevator Separator Extraction system with cyclone Filter system Control panel / electrical system Application Areas Fgedsz I Iv Rspfx Al Ajh Descaling Decoring Cleaning of steel components Surface preparation Removal of scale Preparation for painting or powder coating Shot blasting Special Features Rotating table blast machine for large workpieces Closed abrasive system Automatic abrasive processing Integrated dust extraction with cartridge filter Robust industrial design Suitable for workpieces up to 1,800 kg

Condition: used, High-capacity industrial water treatment, filtration, and pressure boosting plant. This comprehensive system is composed of premium-tier components, primarily powered by high-efficiency Grundfos pumping stations and modular multi-port filtration vessels.The system is suited for manufacturing facilities, municipal water networks, food & beverage industries, closed-loop cooling systems, or large commercial properties. Fgedpoz Ahh Sofx Al Aoh The Package Includes: 1. High-Pressure Vertical Multistage Pumps:Grundfos CR15-12 A-F-A-E-HQQE (Quantity: 1 units) 2. End-Suction Centrifugal Pumps:Grundfos NBE40-160/158 A-F2-A-BQQE ((Quantity: 4 units on the pallet) 3. Filtration & Water Softening Unit:Multi-cylinder battery consisting of large blue composite pressure vessels (FRP tanks) for media filtration, iron removal, or water softening. 4. 2 units x Grundfos (Vertical Multistage Pumps). Condition: Used, as shown on photos. Stored in a dry indoor facility.

Condition: good (used), Bitzer compressor unit Type: HSK 7471-90 (x3) Volume: 250 m3 / h (x3) Cooling capacity: 435 kW at -10 ° C / 40 ° C, 280 kW at -20 ° C / 40 ° C Refrigerant: R404A Dimensions: 3600 x 1350 x 2600 mm Pieces in stock: 1 Stock number: Z9 Fgedpfx Ajg Rcfvol Aeh Condition: Used We have many other refrigeration devices. Chillers, compressors, coolers, condensers, chillers, cold rooms, refrigeration and gastronomic furniture as well as machines and devices for restaurants and meat processing. See our other auctions or call us, not everything is machineseeker.

Condition: good (used), Amico Uniflair Climate Cooling System Precision Air Conditioner 7.2 kW SDC0200B Model: SDC0200B Coolant type: Water Fan(s): Fan with forward-curved blades Supply voltage of the unit: 230V/1ph/50Hz OPERATING CONDITIONS Dry-bulb temperature: 24.0 °C Wet-bulb temperature: 17.1 °C Relative humidity: 50% Altitude: 0 m Air static pressure: 20 Pa Inlet temperature of coolant: 7.0 °C Outlet temperature of coolant: 12.0 °C Glycol content: 0% Freezing point: 0.0 °C Coolant flow rate: 1237 l/h Coolant flow rate: 0.34 l/s PERFORMANCE AND FEATURES Total cooling capacity: 7.2 kW Sensible cooling capacity: 6.4 kW Net total cooling capacity: 6.7 kW Net sensible cooling capacity: 5.9 kW SHR: 89.0 % EER (cooling capacity / system power consumption): 13.9 kW/kW Air flow rate of the air conditioner (dry): 1600 m³/h Air flow rate of the air conditioner (dry): 0.44 m³/s Air temperature outlet/unit outlet: 12.9 °C Relative supply air humidity (unit outlet): 90 % Number of fans: 1 Fan(s) speed control: 72 % Power consumption of room unit: 0.5 kW Power consumption of fans: 2.8 A Max. external pressure: 144 Pa Fjdpfx Aod Ip Efol Aogh Pressure drop of the coil: 16.6 kPa Pressure drop of the 3-way valve: 9.6 kPa Total pressure drop on the coolant side: 26.1 kPa Sound pressure level at a distance of 2 meters in free field measurement: 43.0 dB(A) (at external pressure = 20Pa) DIMENSIONS Air conditioner Height: 1740 mm Width: 550 mm Depth: 450 mm Year of manufacture: 2004 and 2006 Scope of delivery: 1x Amico Uniflair SDC0200B precision air conditioner Item condition: used You can find more items - new and used - in our shop! International shipping costs on request!

Condition: ready for operation (used), functionality: fully functional, power: 22 kW (29.91 HP), Steam boiler LOOS DF 600kg/h renovation! EPS EXPANDER continuous operation 600kg/h 15g/liter electric power 22KW EPS bead storage 300 m3 Fodpfx Aeu U Ad Rol Asgh

Condition: ready for operation (used), Year of construction: 2021, functionality: fully functional, total length: 3,000 mm, total width: 1,200 mm, total height: 1,400 mm, overall weight: 250 kg, TECHNICAL DETAILS Number of nozzles: 13 Spray area: 1 × 3 m Number of tank connections: 4 MACHINE DETAILS Voltage supply: 1 × 230 V + N + PE Fuse rating: 16 A Connected load: 0.9 kVA Fodpjzmr A Ujfx Al Asgh Dimensions & Weight Machine dimensions: 3,000 × 1,200 × 1,400 mm Machine weight: 250 kg

Condition: good (used), ManuMatik / KraussMaffei High-Pressure Cylinder These high-pressure cylinders come from a commutator press and were in use there until the very end. Overall height: 184 cm Cylinder height: 150 cm Rod circumference: 28 cm Diameter: 8.90 cm The following components are included: Check valves z2s16-1-51 Pressure reducing valve Zdr 6 dp0-45/40ym w80 Scope of delivery: 1 x press unit Complete factory closure, large selection of storage platforms, pallet racking, shelving systems, and paternoster lifts. Fgjdehtyxlopfx Al Aoh High-quality industrial machines, lathes, grinding machines, and hand tools. You can find more new and used items in our shop! International shipping costs available upon request!

Year of construction: 2014, condition: good (used), Mechatronics RPU-2100R Reagent Production Unit The Mechatronics RPU-2100R is a reagent production unit used in hematology to optimize reagent logistics in laboratories. The device is manufactured by RR Mechatronics and is often used in combination with hematology analyzers from Sysmex. Purpose and Function The RPU-2100R (Reagent Production Unit) is designed to automatically dilute concentrated reagents (such as Cellpack S Conc.) and produce large quantities of ready-to-use reagent on-site in the laboratory. The RPU-2100R is a single unit, with all components located within a closed housing. The housing features removable, epoxy-coated sheet metal covers. All external connections, as well as the ON/OFF switch, are located on the rear of the unit. All components that can be serviced or replaced by the user are accessible via the front door. The carriage for the Cellpack concentrate (e.g., Cellpack®-S Conc.) can be optionally attached to three sides of the unit. Performance Characteristics and Capacities The RPU-2100R focuses on optimizing reagent management for high-throughput laboratories: Reagent concentrates: Uses Cellpack S Conc. in 10L and 20L containers. Throughput per concentrate: With a 10L container, up to 8,250 blood counts per month can be performed without changing the reagent. With a 20L container, up to 16,500 blood counts per month are possible. Shelf life: The mixed reagent has a shelf life of 30 days after opening. Manufacturer: RR Mechatronics Model: RPU-2100R Catalog number: NARP109010 External connections Power supply, Euro plug Ethernet/USB (only NARP109010) RJ45/USB-B RS-232 (only NARP109000) 9 Pin SUB D connector Fgsdpfoyk U Dwex Al Ajh External connections (liquids) Water connection: G ¾" inch thread Reagent output connection (4x) Push-in hose connection, outer diameter 6 mm Waste connection (1x) hose sleeve, hose inner diameter 12 mm Reagent concentrate Maximum size: 390 x 260 x 300 mm (W x D x H) Reagent: SYSMEX Cellpack Concentrate Reagent dispensing rate: 0.5 liters/minute, 6 minutes max. (with full supply and overflow container and new pre-filter) 1 liter/minute, 2 minutes max. Filtration Air filter, bacterial filter, pore size 0.2 µm Liquid pre-filter, particle filter (sterilized), pore size 0.8+0.45 µm, self-venting Liquid final filter, bacterial filter (sterilized), pore size 0.2 µm, self-venting System dimensions Width: 500 mm Height: 700 mm Depth: 430 mm Weight: approx. 50 kg Water container volume: 2.5 liters Supply container: 2.5 liters Mixing container: 0.6 liters Overflow container: 0.6 liters Language selection available: de, en, es, fr, hu, it, nl, sk, sv (expandable) Voltage: 230 VAC (+/- 10%) Frequency: 50-60 Hz Year of manufacture: 2014 More items - new and used - can be found in our shop! International shipping costs upon request!

Condition: used, -CLIREF Chilled Water Unit -Type: DRLBY64 -Serial No.: 3663 -Number of compressors: 2 -Type: Semi-hermetic -Power: 70 kW Fgsdow Dvcpopfx Al Aoh -Voltage: 380 V -Frequency: 50 Hz -Year: 1984 -With 1 forced-air condenser -Brand: Copeland -Type: D6DA3500A -COPELAND SEMI-HERMETIC COMPRESSOR D6SH-3500 -Serial number: 2010J4262 -Type: Semi-hermetic piston -Number of cylinders: 6 Are you looking for an efficient cooling system? Have you considered installing a chilled water unit? We offer you an overview of this cooling production system, which is more economical and environmentally friendly than conventional air conditioners and other industrial process cooling systems. A chilled water unit (also called a chiller) is an indirect expansion cooling system. This means it uses an intermediate fluid to transfer “cold” to the emitters. There is no refrigerant circulating through the system: in the case of a chilled water unit, water (pure or glycolated) serves as the intermediary fluid, used here as the heat transfer fluid. This cooling solution is suitable for both industrial process cooling and residential air conditioning applications. Relevant specifications: -Displacement [m³/h]: 106 -Locked rotor current [A]: 304 Iiedcusw Dvcps T Rxiei -Max. operating current [A]: 63.3 -Weight [kg]: 240 -Oil charge: 4.3 dm³ -Power supply: 400V/3Ph/50Hz -Quantity: 02

Condition: like new (used), Year of construction: 2020, operating hours: 2 h, functionality: unexamined, machine/vehicle number: HY-1000LPH, input voltage: 220 V, total height: 2,000 mm, total width: 1,000 mm, total length: 2,300 mm, energy consumption: 4 kWh, Equipment: documentation/manual, Reverse osmosis unit, purchased in 2020, and only tested once in 2024. Fgedpfx Alsz Iqrnj Ash The machine is being sold as is.

Condition: new, Year of construction: 2026, functionality: fully functional, input voltage: 380 V, warranty duration: 24 months, ⭐⭐⭐⭐⭐ (5.0) ⚡️ Top Service ⚡️ Fast Delivery ⚡️ Great Support! ✈️ 12-Week Delivery ✈️ ✅✅✅Energy Efficiency Class A+++✅✅✅ ✳️Maintain your liquidity! We offer a variety of financing models to ensure your investment has the greatest chance of success. Contact us today to learn more about our lease-to-own, warranty, or leasing programs. ✳️ ➖➖➖➖➖ ►►►⌛⏰ FASTEST Delivery Time❗ ⌛⏰◄◄◄ ✨✨Buy directly from the manufacturer and secure the price and quality advantage!✨✨ Benefit from Proton's 40 years of experience in surface coating technologies. ➖➖➖➖➖ ☀️ 2 YEAR WARRANTY ☀️ ✅The Multi-Treat spray pretreatment machine is used for the surface treatment of materials to be painted. It offers the possibility of processing up to 8 different chemicals in tanks with varying numbers, depending on the process. All tanks are made of 316 SS and are insulated. The number of tanks and the number of heated tanks are determined according to the process steps. ✅The heating in the tank is done via gas heat exchangers. The processes can be monitored, and the times and temperatures of all processes can be set via the PLC touchscreen. ✅Any errors that occur in the system can be observed on the control panel. Automatic floats are located in the tanks; the system automatically stops if there is not enough water or chemicals in the tanks, and the liquid level is automatically replenished by transferring liquid between the tanks, ensuring the system remains safe. ✅There is a drain basin under all tanks. The drain basin is made of 316 SS. The tanks are made of 2 mm stainless steel 316. The material undergoes penetration testing and is argon-welded and sealed. The grates in the tank prevent dirt from entering the pumps. Fgjdpfx Aofggcwjl Aeh The interior of the cabinet consists of sandwich panels made of stainless steel 304, and the exterior is made of powder-coated sheet metal. ✅The panel thickness is 80 mm. It consists of stainless steel panels filled with polyurethane. PPT ring pipes and nozzles offer a long service life. ✅Thanks to the steam extraction fan, steam diffusion from the system into the work area is prevented. The washing system doors are container-like and sealed with silicone seals. The movable washing platform in the cabinet moves back and forth through the cabinet to wash the materials. The hoses are supported by the mobile carrier system. There are separate pumps for each process and a drain pump for draining liquids from the tanks. The drain pump is connected to the chemical drain tank. ✅There are manual application guns for manual application for each process. The system has a manual mode for pretreatment. The drain time and process time can be set via the PLC control panel. The drain time applies to manual application.