Used Veneer Cross-Gluing for sale (5,923)

Condition: used, Year of construction: 2013, functionality: fully functional, Fisher+Rueckle FZR-24 Veneer cross-gluing machine, year 2013 for sale! Veneer strip length 400-1100 double lane/ 350-2100 mm single lane Veneer strip width 50-500 mm Veneer strip thickness 0.3-1.5 mm Max nominal output /machine cycles 30 cycles/min Average production speed 17-20 cycles/min Effective length of heating zone 2478 mm Connection power 22 kW Fpjdpoumrf Ajfx Ak Uol Compressed air 6 bar Glue types PVA or UREA based

Condition: good (used), Year of construction: 2002, functionality: fully functional, machine/vehicle number: 209070, CASATI BIT 900/2000 veneer cross-cutting machine. Fully functional. Fpjdpfx Aksuna E Hs Usl

Condition: used, max. veneer thickness: 2.0 mm min. veneer thickness: 0.4 mm Joining material: glue thread with hot air heating Compressed air required: yes Disc: Yes, for transporting the veneer over the veneer table Control via foot pedal Machine type: floor model Feed speed: 7 m/min Stand extension: 900 mm Weight approx.: 185 kg Fpedpfxsxgqmxj Ak Uel Dimensions: 1400 x 500 x 1680 mm Storage location: Nattheim

Condition: used, Year of construction: 1995, Max. veneer thickness: 3.0 mm Gluing system: glue application roller with roller heating Disc: Yes, for transporting the veneer across the veneer table. Machine type: stationary Feed rate: 5 - 15 m/min Feed type: stepless Fpjdpfxozkh S Hs Ak Uol Stand overhang: 950 mm Working height or feed table height: 940 mm Description: The glue is applied from below; the outer side of the veneer is always visible, with automatic thickness and tolerance compensation. Approximate weight: 400 kg Dimensions: 1700 x 900 x 1550 mm Motor power: 0.8 kW Storage location: Nattheim

Condition: good (used), Year of construction: 2004, functionality: fully functional, machine/vehicle number: 140611/3, Fisher + Rückle Gluemaster - glue applying machine. Machine is 100% functional. Fedpfxeum R Ago Ak Ujpl

Condition: excellent (used), Year of construction: 1988, I sell the cross veneer guillotine Josting QFS 800. Fpodsyc Nilepfx Ak Ujl Year 1988 (2pcs. available on stock). Cutting length 800mm. Cutting height 60mm. Very good condition. Available immediately.

Condition: ready for operation (used), Year of construction: 1994, functionality: fully functional, machine/vehicle number: 740703/01, passage width: 2,800 mm, input voltage: 400 V, type of input current: three-phase, The machine is fully operational and can be inspected during production while powered on. Also included in the sale is a Fisher + Rückle veneer parallel milling/gluing unit, capable of: edge milling with diamond tools automatic glue application preparation of veneer edges before splicing The complete line has been used in professional production and has been continuously maintained. Main advantages: Heavy-duty industrial Fisher + Rückle quality Very stable and precise operation Fpjdjzdiinepfx Ak Usl Machine in good working condition Can be demonstrated during operation Parallel milling and glue application unit included Diamond tooling included Suitable for professional veneer production The machine is located in Denmark and can be inspected by appointment.

Condition: used, Year of construction: 2015, functionality: fully functional, Machines connected in one line (all three machines are only sold together): 1. Veneer cross-jointing machine FURNIMASTER FZR-21 2. Direct unloading device DA-12R 3. Scissor lift INCLUDED Veneer specifications Veneer strip length (grain direction) 350 - 2100 mm Veneer strip width (cross grain) 50 - 500 mm Veneer strip thickness 0,3 - 1,5 mm Power data Maximum nominal output / machine cycles 30 cycles/min. Average production speed 17 - 20 cycles/min. Connection data (Basic machine) Connection power 9 kW Compressed air 6 bar Power consumption Electric energy 6,2 kWh Compressed air 15 NL/min. Dimensions and weight (Basic machine) Fjdpfxoy Tpb Re Ak Ujpl Length 3500 mm Width 1500 mm Height 1530 mm Working table height 930 mm (+50/-0 mm) Net weight, approx. 2500 kg

Condition: used, Year of construction: 2011, Stand-off distance: 920 mm Fjdozqyx Sepfx Ak Ujpl Feed rate: 15 m/min

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, total width: 2,400 mm, space requirement length: 9,000 mm, working width: 1,600 mm, Crosswise Veneer Splicing Machine / Cross Splicing Machine Fsdpfx Ajyayumek Ujpl Manufacturer: Kuper Model: ACR CrossRunner 1600 Year of manufacture: 2007 Narrow cross splicing machines for pre-glued veneer strips with a small working width. The machine operates significantly faster in cross-feed mode compared to longitudinal machines and is thus an economical alternative, for example, for cross-veneered interior doors or smaller furniture parts. Working width: 1600 mm (along the grain) Veneer strip width: from approx. 60 mm Veneer thickness: approx. 0.3 - 2.5 mm Feed speed: approx. 30 m/min Suitable glues: PVAc or urea glue With automatic stacking Control: Siemens Simatic with touch display Voltage: 400 V, 50 Hz, 3 Ph Rated current: 16 A Overall dimensions (W x L): approx. 2400 x 9000 mm

Condition: like new (used), functionality: fully functional, Fisher+Ruckle Omnimaster butt welding machine Veneer feed rate: 5/50 m/min Heating zone length: 1000 mm Cooling unit Dimensions: 2400x2300x1900 mm Fpjdpfezl Skijx Ak Uol Max. heating temperature: 250°C Weight: 1500 kg Year: 2006 Voltage: 400V Power: 9 kW

Condition: excellent (used), Kuper FWM 630 in excellent condition Fpedpey Swpmofx Ak Uel

Condition: used, Throat depth: 420 mmConstant feed rate: approx. 6 m/minDrive electric motor: 25 W, 190 V=Supply voltage: 110 - 235 V, 50 - 60 HzTotal connected load: 110 WHeating head: approx. 75 WNet weight: approx. 22 kg with foot pedalStorage location: Nattheim Fsdpfx Akjx Upgcs Ujpl

Condition: used, Year of construction: 2006, - Veneer bundle length (fiber direction): 400 - 4000 mm - Veneer bundle widths (perpendicular to the fiber direction): 45 - 515 mm - Veneer bundle thickness: approx. 10 - 40 - Throughput speed: approx. 27 m/min. Double gluing machine for veneer Manufacturer: Monguzzi, Carugate Type: Gluemaster Year of manufacture: 2006 For reliable, uniform, and precise application of PVAc or UREA adhesive in a single pass on veneer bundles that are joined parallel on both sides. Fine adjustment of the adhesive quantity and the uniformly applied lateral and vertical pressure on the veneer bundle result in precise, spot-free, and perfectly glued veneers with minimal adhesive consumption. Fpjdpfx Aezuzp Tsk Uol Technical data: Veneer bundle length (fiber direction): 400 - 4000 mm Veneer bundle widths (perpendicular to the fiber direction): 45 - 515 mm Veneer bundle thickness: approx. 10 - 40 Throughput speed: approx. 27 m/min. Special features: - The Gluemaster can be positioned directly next to a veneer gluing machine. - Quickly and easily accessible adhesive containers for fast and easy refilling or cleaning. - Tool-free removal of the adhesive containers and easy cleaning (no dead spots). - Continuous pressure rollers and large pressure plates for uniform pressure on the veneer bundle/edges during gluing. - Rigid 4-point upper roller guide with floating upper rollers to press the veneer bundle without damaging it. - Easily adjustable adhesive quantity. Adhesive pot cooling unit For a longer service life of the adhesive pot, especially recommended for the use of UREA adhesive. 1 motorized discharge roller conveyor To feed the glued veneer bundle out of the Gluemaster and transport it to the connected Fanningmaster. Length of the roller conveyor: 3600 mm Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: used, Veneer machine Manufacturer: Fischer & Rückle Type: FZR 21 Year of manufacture: 2015 For the most efficient edge gluing of parallel-connected veneer strips into continuous or component-specific veneer surfaces. The cut or rotary-cut veneers must be pre-glued with PVAc or UREA adhesives. This edge feeding joining apparatus is the most economical alternative to longitudinal joining apparatuses for cross-grain applications. Production Approx. 17-20 joints/min. Technical data Veneer strip lengths (grain direction): 350-2150 mm Veneer strip widths (cross-grain direction): 50-600 mm Veneer surface width (cross-grain direction): min. 260 mm Fpsdpfszuzptjx Ak Uol Veneer strip thickness: 0.3-1.5 mm Equipment Feeding device for efficient and convenient semi-automatic feeding of veneer strips Panel Automatic for component-specific surfaces with pre-sorted components and a pre-selected number of veneer strips. Features - The Furnimaster-plus has a veneer alignment function (reverse transport movement) - Perfect joining of cut or rotary-cut veneer of all wood species, even with wavy or rippled veneer - Unique, proven horizontal pressing system that results in fully closed, strong glue joints - Solid, robust construction for high durability, reliable and fail-safe operation - Easy operation thanks to touchscreen panel, clear symbols, separate manometers with direct access, etc. - Liftable pressure bars for quick and easy access to the heating plates for cleaning - Few wear parts, low costs for service and maintenance Cross cutter For cutting to a pre-set format width (across the grain) directly after splicing. Short widths can be pre-set and measured with the integrated encoder. Larger widths are determined by two photoelectric sensors that are mounted at the required distance from the clipper on the direct stacking device. Direct stacking device DA-12R, belt system For unloading and stacking the veneer surface directly after joining. The joined surfaces are gently unloaded and stacked on this compact direct stacking device without any mechanical impact. Min. veneer sheet length (grain direction): 350 mm Veneer sheet widths (across the grain): 250 - 1200 mm Max. stack height: 500 mm Max. stack width (across the grain) for unloading to the rear end: 1200 mm Note: The technical data and descriptions are taken from the original order confirmation. The data is for informational purposes only and is not binding. Another Fischer & Rückle machine, type: FZR 21, year of manufacture: 2009, is also available.

Condition: used, Year of construction: 2009, - Veneer strip lengths (fiber direction): 350-1500 mm - Veneer strip widths (cross-fiber direction): 50-500 mm - Veneer surface width (cross-fiber direction): min. 260 mm - Veneer strip thickness: 0.3-1.5 mm Veneer machine with direct stacking Manufacturer: Fischer & Rückle Type: FZR 15 / DAR 22 Year of manufacture: 2009 Cross-feed splicer For the most efficient cross-gluing of parallel-joined veneer strips into endless or component-specific veneer surfaces. The cut or rotary-cut veneers must be pre-glued, using PVAc or urea adhesives. This cross-feed splicer is the most economical alternative to longitudinal splicers for cross-fiber applications. Production Approx. 17-20 joints/min Technical data Veneer strip lengths (fiber direction): 350-1500 mm Veneer strip widths (cross-fiber direction): 50-500 mm Veneer surface width (cross-fiber direction): min. 260 mm Veneer strip thickness: 0.3-1.5 mm Equipment Feeding device for efficient and convenient semi-automatic feeding of veneer strips. Panel automatic for component-specific surfaces with pre-sorted components and a pre-selected number of veneer strips. Features - Perfect bonding of cut or rotary-cut veneer of all wood species, even with wavy or undulating veneer - Unique, tried-and-tested horizontal pressing system that results in completely closed, solid glue joints - Solid, robust construction for a long service life, reliable and fail-safe operation - Easy operation thanks to screen, clear symbols, separate pressure gauge with direct access, etc. - Liftable pressure beams for quick and easy access to the heating plates for cleaning - Few wear parts, low costs for service and maintenance Fpjdpfx Akezuz Hlo Uol Cross-cutter For cutting to a pre-set format width (across the fiber direction) immediately after splicing. The straight alignment of the veneer must be observed and, if necessary, corrected by pressing a button. When working in endless mode, the required distance to the direct stacking device is set. Direct stacking device DAR-22 For outputting and stacking the veneer surface immediately after splicing or cutting. The spliced surfaces are gently output and stacked without this compact direct stacking device exerting any mechanical forces. Min. veneer sheet lengths (fiber direction): 350* - 1500 mm Veneer sheet widths (across the fiber direction): 260 - 500* - 2200 mm Stack removal from the left, right, or rear Max. stack height: 500 mm *Reliable stack alignment not guaranteed Note: The technical data and descriptions are a transcript of the original order confirmation. The data is for informational purposes only and is not binding.

Year of construction: 2015, condition: excellent (used), functionality: fully functional, Technical specifications for the bale opening line for RDF, MSW, paper, and cardboard: Manufacturer: Cross Wrap Oy Ltd., Siilinjärvi, Finland Type: BO 4000 Year of construction: 2015 Number of bales opened: 674 Operating time: only 3 days, exclusively during the initial commissioning of the entire system upon new installation Opening time: approximately 45 seconds per bale Bale dimensions (W x H x L): 1100 x 1100 x 1400 – 1900 mm Max. bale weight: 2,000 kg System conveying height: 1,400 mm Max. system conveying width: 1,200 mm Fjdpfx Aszp H R Eok Uepl Material to be opened: RDF/MSW System availability: 98% Noise level of the bale opening line: 85 dB(A) Total connected load: 37 kW Rated current: 125 A Control panel: SIEMENS SIMATIC HMI Touch Controller: SIEMENS S7 ET200S Installation dimensions: 8,463 x 2,890 x 3,960 mm (L x W x H) Scope of supply: Infeed conveyor: 3,500 x 1,200 x 1,400 mm Feed conveyor to the opener: 1,500 x 1,200 x 1,400 mm Bale opener (gripper with knife) Special equipment: Oil heating in the hydraulic oil tank Control cabinet heating Oil cooler for hydraulic unit Explanation for the short operating time: The entire Cross Wrap bale opening line, type BO 4000, was installed in 2015 at a municipal waste incineration plant. The reason for installing the system was to ensure that municipal waste could continue to be accepted, compressed, wrapped, and stored even during an operational disruption or maintenance of the incineration plant until the disruption was resolved. Subsequently, all the bales were to be opened again, and the waste fed into the normal incineration process. This worst-case scenario never occurred. The system was installed, commissioned, and then never used in normal operation. Only during the commissioning and initial operation of the entire system in 2015 were 674 bales opened over three days. The system is in very good condition and is immediately ready for operation. Due to restructuring measures in the incineration plant, the installation space of the bale opener was needed. This means that the complete line is now available for sale. Brief description of the bale opening process: The compressed bales are placed on the infeed conveyor from the side or from the rear using a forklift. To open the bales, they must be positioned horizontally to the conveyor with the wire or twine binding; otherwise, the bales must be rotated by 90° beforehand. The opening conveyor brings one bale at a time in front of the cutting unit. The grippers hold the wires or the twine binding. The rotating knife cuts the bale lengthwise. After that, the gripper returns to its starting position. The opened bale is now conveyed via the conveyor to the discharge chute and then falls onto the subsequent conveyor system. Remarks: New price of the complete system: €296,000. The documentation (operating manual, CE declaration, electrical/hydraulic circuit diagram) is complete. The system has been dismantled into transportable units, stored, and is available for inspection and loading in the short term. We assume no liability for the technical data or any potential errors.

Condition: used, Year of construction: 1993, Second-hand machine Year of manufacture: 1993 Bench-top machine The zigzag thread used as the adhesive medium is applied from below Automatic thickness and tolerance compensation for measured veneers Veneer from approx. 120 mm in length, 35 mm in width and a thickness of 0.3–2 mm Electrical connection: 230 V Column reach 700 mm Fpjdpfxozk N D Rs Ak Usl Material feed rate approx. 6 m/min. Weight approx. 54 kg Availability: at short notice Storage location: Flörsheim

Condition: used, Year of construction: 2009, functionality: fully functional, Veneer splitting machine FANNINGMASTER 515 for sale! Roller conveyor INCLUDED Veneer specifications Veneer strip width (cross grain) 45 - 515 mm Veneer strip length (grain direction) 400 - 4000 mm Veneer strip thickness (depending on quality of veneer) 0,3 - 1,5 mm Fpjdpey Tngxofx Ak Ujl Veneer package height 10 - 40 mm Machine capacity Throughput speed approx. 30 m/min. Machine specifications Electric energy 1,2 kW Compressed air 6 bar Power consumption Compressed air consumption 5 NL/min. Dimensions / weight Measurements Length 2360 mm Width 1570 mm Height 1750 mm Net weight, approx. 1150 kg Working table height 900 mm

Condition: used, Year of construction: 2006, functionality: fully functional, CUTMASTER Fisher + Rückle AFD-35/2600 is an industrial, heavy-duty double-blade longitudinal veneer guillotine. Tech. data Cutting length 2.600 mm Length of cross-cut 1.477 mm Cutting height 100 mm Strip width min 20 mm Double-blade Rip fence Yes Fodpfxsy Tm Tks Ak Ujpl Pressure beam pneumatic Blade drive pneumatic Weight 3.800 kg CE marking Total connection 10 kW

Condition: used, Veneer machine with direct stacking Manufacturer: Fischer & Rückle Type: FZR15 / DAR 12 Year of manufacture: 2006 / 2014 Cross-feeding splicer For highly efficient cross-gluing of parallel-joined veneer strips into endless or component-specific veneer surfaces. The cut or rotary-cut veneers must be pre-glued with PVAc or urea adhesives. This cross-gluer is the most economical alternative to longitudinal gluers for cross-grain applications. Production Approx. 17-20 joining points/min Technical data Fjdpfx Akszuz Hfo Uopl Veneer strip length (grain direction): 350-1500 mm Veneer strip width (cross-grain direction): 50-500 mm Veneer strip thickness: 0.3-1.5 mm Equipment Feed device for efficient and convenient semi-automatic feeding of veneer strips. Plate automation for component-specific surfaces with pre-sorted components and a pre-selected number of veneer strips. Features - Perfect bonding of cut or rotary-cut veneer of all wood species, even with wavy or rippled veneer - Unique, tried-and-tested horizontal pressing system that results in fully closed, solid glue joints - Solid, robust construction for high durability, reliable and fail-safe operation - Easy operation thanks to screen, clear symbols, separate manometer with direct access, etc. - Liftable pressure bars for quick and easy access to the heating plates for cleaning - Few wear parts, low costs for service and maintenance Cross cutter For cutting to a pre-set format width (across the grain). The width is determined by two photoelectric cells that are mounted at the required distance from the cutter. Direct stacking device DAR-22 For outputting and stacking the veneer surface directly after splicing. The spliced surfaces are gently outputted and stacked on this compact direct stacking device without mechanical intervention. Min. veneer sheet length (grain direction): 350 mm Veneer sheet width (across the grain): 250 - 1200 mm Max. stack height approx. (small sheets are not perfectly aligned): 500 mm Max. stack width (across the grain) for discharge to the rear end: 1200 mm Note: The technical data and descriptions are a transcript of the original order confirmation. Data is for informational purposes only and is not binding.

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, Weinig Dimter Profipress C 2800 P - 6 m gluing press Manufacturer: Weinig Dimter Model: Profipress C 2800 P - 6 m Year of manufacture: 2009 Fedpfeyvgiasx Ak Uspl Condition: Very good Machine description: For sale: Weinig Dimter Profipress C 2800 P - 6 m wood gluing press, year 2009, designed for the production of glued wooden panels and elements made of soft timber. The machine was developed for efficient production using PVAC glue in D2 / D3 class and allows processing of material within specified width, thickness and input length ranges. According to the documentation, this model can process timber with widths from 30 to 80 mm, thicknesses from 15 to 40 mm and input lengths from 2100 to 2800 mm. The machine allows the production of panels with variable widths from 600 to 1200 mm. For short lengths, the collecting distance range is 700 to 1400 mm. The output is up to 10 to 15 infeeds per minute, depending on the entrance width. The Profipress C 2800 P - 6 m is intended for processing soft timber. The permitted bending tolerance is maximum 5 mm per meter. The documentation also specifies recommended operating conditions, including room temperature from 15 to 30 degrees Celsius and air humidity in the range of 40 to 65 percent. Technical data: - Model: Profipress C 2800 P - 6 m - Year of manufacture: 2009 - Performance: max. 10–15 infeeds/min, depending on entrance width - Timber width: 30–80 mm - Timber thickness: 15–40 mm - Timber entrance length: 2100–2800 mm - Collecting distance for short lengths: 700–1400 mm - Panel width: 600–1200 mm - Timber type: soft timber - Permitted bending: max. 5 mm/m - Glue type: PVAC D2 / D3 - Recommended room temperature: 15–30°C - Recommended air humidity: 40–65% Features and advantages: - Press designed for glued panel production - Machine from the renowned Weinig Dimter brand - Output up to 10–15 infeeds per minute - Possibility to produce panels with variable width - Suitable for processing soft timber - Works with common PVAC D2 / D3 glue - Industrial application for woodworking and production plants

Condition: ready for operation (used), Glulam press bed, L 18 m Glulam press bed, L 36 m Fpjdjzqdytspfx Ak Ujl Press technology for glulam for straight and curved beams BSH press Cross-laminated timber (CLT) press Glued laminated timber (glulam) press Adhesive press

Condition: used, Second-hand machine Second-hand veneer splicing machine from Kuper, model FW 1150 Passage width: 1150 mm Feed speed: approx. 10–30 m/min Fedszk Nqqepfx Ak Uspl Veneer thicknesses: 0.3–3 mm excluding tables at the front and rear Availability: at short notice Location: Röllbach

Condition: used, Year of construction: 2010, - Perfect for surface finishing - Constant working height - Q/L/Q Fine/cross-sanding machine Manufacturer: Weber Type: KSF-3-1350 Year of manufacture: 2010 Technical data - Equipped with 3 sanding belts for high-quality fine, veneer, and high-gloss sanding. - With a constant working height Machine frame - Heavy-duty steel welded construction for mounting 3 sanding units - Constant inlet height of 900 mm - Control and sanding belt change side on the inlet side, on the left - Stepless feed speed of 3-18 m/min, frequency-controlled. - Vacuum version of the conveyor belt / with 1 vacuum blower 5.5 kW, and a vacuum channel up to the upper edge of the machine Unit 1: Cross-belt unit - Pressure pad belt with felt and graphite for long service life - ISD segmented pressure bar system with 11 mm workpiece detection and 44 mm pressure pad width - Workpiece-controlled sanding belt blowing device Unit 2: CBF combination unit - One grooved rubber contact roller 0 130 mm, rubber hardness 60 Shore - One cross-running flap band with separate drive 4.0 kw Fpodpfxjzuzctj Ak Ujl - ISA segmented pressure bar system with 11 mm workpiece detection and 22 mm pressure pad width (counter-rotating) - Workpiece-controlled oscillating sanding belt blowing device Unit 3: Cross-belt unit - ISD segmented pressure bar system with 11 mm workpiece detection and 44 mm pressure pad width - Workpiece-controlled sanding belt blowing device Operator terminal SIEMENS" MP 377 12" Multi-Panel - Graphical user guidance via 12" color display - Program memory with 300 programs - Setting of all parameters via program WEBER i-Touch control - One rotary knob for navigating through the most important functions WEBER AWDM - Automatic thickness adjustment at the machine inlet with start switch Overthickness - Selector switch at the machine inlet with the following functions: - Automatic lifting of the contact roller and the segmented pressure bars - Feed stop ISA/ISD control - High-resolution workpiece detection in a 22 mm grid - Free loading of complex part shapes - Multiple loading with a small lateral distance - Sanding intensity individually adjustable at all edges - Sanding pressure adjustable via program ISA segmented pressure bar system (Unit 2) - Pressure pad movable in the longitudinal and transverse direction ISD segmented pressure bar system (Unit 1+3) As ISA, but additionally with - Separate adjustable pressure for the edge area (higher or lower) - Optionally only on the outer edge or outer and inner edges - Longitudinal and transverse edges or only longitudinal edges can be adjusted Workpiece blowing device - with WEBER ES system - Energy-saving, workpiece-controlled workpiece cleaning with single slider control WANDRES-Micro-Cleaning (single brush version) - Power sword brush with integrated micro-humidification of the linear brush (for optimal paint dust removal) Technical data - Working width: 1350 mm - Drive Unit 1 (frequency-controlled-Eco-Drive): 15.0 kW - Drive Unit 2 (frequency-controlled-Eco-Drive): 20.0 kW - Drive Unit 3 (frequency-controlled-Eco-Drive): 15.0 kW - Drive CBF: 3.0 kW - Drive vacuum blower: 5.5 kW - Drive feed (frequency-controlled): 3.0 kW - Drive height adjustment (frequency-controlled): 0.75 kW - Sanding belt speed (frequency-controlled): approx. 3-20 m/s - Sanding belt dimensions cross belts (W x L): 2x150x5100 mm - Sanding belt dimensions wide belt (W x L): 1370x2620 mm - Workpiece thickness (min./max.): 4-140 mm - Working height (constant): 900 mm - S