Used Veb Excenterpresse Automatic Punching Press Four-Column Veb for sale (34,633)

Condition: good (used), Pressure: 25 t cutting capacity: thickness / width: 1,25/ 140 mm Strokes per minute: min./max.:250 strokes/min. ram stroke - max.: 20 mm Laodpfx Anefim Dwjcea Table surface usable: WxD: 440 x 360 mm

Condition: good (used), table size: 350x350mm Lodpfx Asfm A Amoncoaa

Condition: good (used), Year of construction: 1999, KAISER Press KSTU 3150 - 20 - 5 RK Press force: 3,150 kN Strokes per minute: 20-150 1/min Stroke adjustment: 20-180 mm Ram adjustment: 150 mm Lajdpfjy El S Asx Ancea Table area: 2,000 x 1,250 mm Ram area: 2,000 x 1,000 mm Installation height: 600 mm FECKER strip feeding line Strip width: 30-600 mm Strip thickness: 0.3-8.0 mm Max. coil weight: 8,000 kg

Condition: good (used), Year of construction: 2000, Kaiser Press KSTU 3500 - 25 - 6 P Press force 3,500 kN Stroke rate 20–100 1/min Lajdpfx Ajy El Iqsncja Stroke adjustment 40–250 mm Ram adjustment 200 mm Table area 2,500 x 1,250 mm Ram area 2,500 x 1,100 mm Installation height 700 mm Dreher strip feeding line Strip width 30–600 mm Strip thickness 0.3–3.0 mm Max. coil weight 3,500 kg

Condition: used, Year of construction: 2001, SanGiacomo Press Model: T250 DM Pressing force: 2,500 kN Stroke adjustment: 21 - 230 mm Ram adjustment: 120 mm Stroke rate: up to 75 strokes/min Ram surface: 2,300 x 1,090 mm Table surface: 2,300 x 1,090 mm Dimensions: 3,550 x 1,910 x 5,200 mm (LxWxH) Machine weight: 42,000 kg Laedpfx Ansyz Shpecja

Condition: excellent (used), Year of construction: 2002, Manufacturer: ARISA Type: S-2-630-350-FS Pressing force: 6,300 kN Table size: 3,500 x 1,450 mm Ram size: 3,500 x 1,400 mm Lasdpfx Aoyx S Iwsncoa Stroke adjustment: 25–300 mm Installation height: 700 mm Ram adjustment: 300 mm Strokes per minute: 20–70 Control system: SIEMENS S7 Including DIMECO coil line

Condition: used, Single-Column Eccentric Press RASTER ZEULENRODA Type PDA 100 Year of manufacture: 1995 Pressing force: 100 tons Throat depth: approx. 360 mm Table size: 1200 x 710 mm Ram area: 900 x 500 mm Table opening: 400 x 120 mm Stroke adjustment: 6 to 82 mm Laodpfx Anox U Eiajcea Ram adjustment: 100 mm Installation height, max. stroke, ram Top Dead Center (TDC): max. 469 mm Installation height, max. stroke, ram Bottom Dead Center (BDC): max. 387 mm Strokes per minute: 50-200 s.p.m. Main drive motor power: 18.5 kW Power supply: 400 Volt, 50 Hz - Hydraulically actuated multiple-disc wet clutch and spring-loaded safety brake - Infinitely variable drive via PIV gearbox with inching mode for automatic stroke adjustment and setup operations - Hydraulic overload protection in the ram - Press force and process monitoring via UNIDOR APS - Pneumatic, steplessly adjustable ram weight compensation - Roller feeder MABU WE16, 160 x 3 mm, programmable feed length - Central grease lubrication - Operating manual and documentation for the press Included: Roller feed unit MABU Type WE16 Strip width: 160 mm Strip thickness: max. 3 mm Strip cross-section: max. 300 mm² Roller diameter: 63 mm Strip speed: 40 m/min - Adjacent feeder control MABU Space requirements for eccentric press L x W x H: 270 x 240 x 350 cm Weight of the press: 13.5 tons

Condition: used, Year of construction: 1990, Technical details: Pressure: 63 t distance between columns: 200 mm stroke: 150 mm dayligth: 430 mm no. of strokes: 400 Hub/min T-slots H 12 650: 18 mm Laodju Icxqspfx Ancoa hole in table: 420x160 b x l mm ram surface area: 650 x 450 mm control: Wanske Tronicpress CNC passage of columns: 550x540 mm tank: 200 l stroke of ram - fixed: 100 mm ram diameter: 40 mm table height over floor: 1000 mm table: 600x450 mm table height over floor with metal base stand: 880 mm total power requirement: 30 kW weight of the machine ca.: 3,9 t Hydraulic automatic punching press for precision work (high-speed press) - for punching, drawing, pressing, minting, bending, riveting, straightening, assembling - with hydraulic gripper feed type HS 150 and 7-roller straightener (moving) - Normal strips of approx. 0.4mm - 2.5mm thickness x approx. 160mm width, as well as narrow strips up to approx. 4mm can be processed. Feed length can be adjusted as required via the control unit. - with ram round column guide - with automatic central lubrication - High-speed: up to 400 strokes min-1 - motorized adjustable fixed stop (bottom can be adjusted by hand/motorized) - Operating modes such as continuous stroke and/or single stroke Equipment: - 1x hydraulic unit - 2x control cabinets *

Condition: used, Year of construction: 1974, Technical details: pressure: 30 t ram surface area: 450x250 mm ram adjustment: max. 50 (manual) mm strokes per minute: 20 - 120 stroke: ca./approx. 20 mm mm adjustment of stroke: nein/ no stroke adj. mm dayligth: Arbeitsraum: 220 - 280 mm Table surface area useable: 600 x 600 mm total power requirement: 7,5 kW weight of the machine ca.: 5,0 t dimensions L x W x H: Maschine: 1,8 x 1,2 x 2,7 m Dimensions (LxWxH): Schaltschrank: 0,92 x 0,46 x 1,4 m Automatic punching press 4 columns mechanical with feed unit Ljdpfsu Icx Rjx Anceaa with control panel passage widths: Column opening front=350mm and side=258mm *

Condition: used, Year of construction: 1978, pressure 160 t no. of strokes 40 - 120 Hub/min sheet width mm total power requirement 40 kW Pressing capacity 160 ton Table clamping area 1,100 x 1,280 mm Ram clamping area 850 x 890 mm Lasdpfet Hwz Nsx Ancoa Distance between guides 1,120 mm Distance between columns (below guide ways) 1,350 mm Distance between Table and ram in upper position approx. 400 mm No. of strokes 40 - 120 /min Adjustment of stoke 67 / 115 / 160 mm Ram adjustment, motor driven 125 mm Ejector travel 50 mm Total electrical load, approx. 40 kW - 500 V - 50 Hz Weight, approx. 24,000 kg Accessories / Special Features * WEINGARTEN Sheet Metal Uncoiler with overhead loop control (space saving because it does not need a loop-pit). Strip width 375 mm. The loop control guides the strip-material from the uncoiler to the machine thru a straightening device with automatic supervision. * 8-track slide bearing guide. * Automatic oil-circulation lubrication. * Hydraulic overload protection in conjunction with the ORTLINGHAUS Clutch Brake * Safety doors. * Motor-driven ram adjustment 125 mm. * Required space: 4 x 2.2 m. Height max. 4.6 m (only press)

Condition: used, Year of construction: 1984, functionality: fully functional, machine/vehicle number: 02.086.00, pressing force: 40 t, For sale is a try-out press (spotting press) from manufacturer REIS with a maximum pressing force of 40 t. The machine features a table size of 1,280 × 900 mm, a maximum installation height of 1,035 mm, and a stroke up to 1,100 mm, making it suitable for spotting, adjustment operations, and tool modifications in mould and tool making. ##### Technical Data & Information: Spotting Press – 40 t – 1,280 × 900 mm ==== General Details - Design: 4-column press - Manufacturer: REIS - Year of manufacture: 1984 - Press force: 40 t (adjustable) - Return force: 20 t - Distance between columns: 930 × 705 mm - Max. installation height: 1,035 mm - Table size: 1,280 × 900 mm - Overall dimensions (W x D x H): approx. 3,800 × 1,850 × 3,600 mm - Total weight: approx. 9,000 kg - T-slots: DIN 650 – 18 mm ==== Hydraulic Cylinder - Stroke: 0–1,100 mm (adjustable) - Cylinder diameter: Ø 160 mm ==== Hydraulic System & Drive - Flow rate: 24 l/min - Operating pressure: 200 bar Ljdpfx Aney Ec H Roceaa - Motor power: 9.5 kW ==== Movement System - Ram swivel unit: approx. 175° - Extendable table: yes - Table ejector: available ==== Controls - Operation: Control panel - Additional function control: Oil ports for core pulls (2 units) ==== Safety - Mechanical anti-drop protection ==== Electrical Connection - Main supply: 400 V AC - Fuse protection: 35 A - Frequency: 50 Hz - Connected load main motor: 9.5 kW ##### Areas of application: spotting, adjustment, toolmaking, mould making, plastics engineering, automotive, maintenance (spotting press, try-out press, test press, hydraulic press, 40 t press, 40 tonne press, 4-column press, tool adjustment press, tryout press, tool try-out press) Are you looking for a hydraulic press tailored to your specific application? Contact us for a customised quotation. Our hydraulic presses are manufactured in accordance with German machinery directives, as well as European machinery directives (Directive 2006/42/EC), EC standards, and EU safety regulations. In addition, our presses exceed Canadian and European safety requirements as they fully comply with the national Brazilian safety guideline NR 12, which builds on these standards. Our core strength lies in custom machine construction and press automation. We supply bespoke hydraulic presses at surprisingly affordable prices. The hydraulic systems of our presses predominantly utilise components from leading European manufacturers.

Condition: used, Repair-needing Single-Column Eccentric Press CHINA Type JB23-16 Machine no. 1711BL16D11-17 Year of manufacture: 2017 Press force: 16 tons Throat depth: 160 mm Table size: 480 x 320 mm, with 18 mm T-slots Ram surface: 175 x 130 mm Table through-hole: Ø 125 mm Ram stroke: 60 mm Ram adjustment travel: 40 mm Max. installation height: 330 mm Clamping pin bore: Ø 35 mm Ram strokes: 130 strokes/min Motor power: 2.2 kW Drive power: 380 Volt, 50 Hz - Mechanical rotary wedge clutch - No stroke adjustment Required space (L x W x H): 1300 x 900 x 1850 mm Weight: 790 kg Mechanically in need of repair, clutch makes loud knocking noise. Lsdpfx Aoyxrhwonceaa Release mechanism requires reworking. We are clearing space Priced to sell – ideal for export.

Condition: used, manufacture Tucker Type ERC80/ERF23FBGR/ERT In our opinion, the machine is in good used condition and can be viewed under power by appointment. Punch riveting system: - ERC80 - ERF23 - BGR - ERT There are approximately 150 pieces available. Accessories, tools and clamping devices shown are only included in the scope Lsdpoxwp Nyofx Anceaa of delivery if this is noted in the additional information. Changes and errors in the technical data and information as well Subject to prior sale!

Condition: new, pressure: 100motor: 15daylight: 500stroke lenght (max.): 400table diamension: 800 x 600tappet area: 800 x 600table height: 850messurements (LxWxH): 1.300 x 2.000 x 2.750weight approx.: 5.500oil filling: 200 Control / Key switch:         1. setup mode Manual without light sensor(max. 10mm. /sec. speed). 2. automatic (full speed) with light sensor Main cylinder: Ø 230mm. Auxiliary cylinder: 2 pcs. Ø 50 x 30mm. Auxiliary guide: 2 pcs. Ø 50mm. Motor: 11kw. - 15hp. ( IE-3 ) Pump: 23Liter / ASC. Speed : flow 110mm./sec. - return 200mm./sec. - Pressure : 9 mm/sec. Lasdpfx Ajm Nntyoncoa Installation height: 500mm. Stroke length: 400mm. Table top: 800 x 600 - (with T - grooves) Plunger plate: 800 x 600 - (with T - grooves) Table height: 850mm. (Floor to table top upper edge) ----- Accessories Hydraulics:           Hydraulic control block & accessories: REXROTH Pressure adjustment via PLC.  (10 - 60 tons) Speed adjustable via PLC. Air cooler Pre-fill valve Accessories control: Siemens S7-1200 Main control box   Swivel control panel Safety PLC. - SICK Light sensors SICK 700 + 150mm. Linear scale for adjusting the stroke length 9 PLC screen - Siemens (German & English) Movable two-hand control Ethernet connection for remote maintenance Alarm annunciator for malfunctions (candlestick & sound) 2-fold workspace lighting 8 free ON & OFF buttons on the PLC. for external connections The press complies with the machine directives Hydraulic proportional valves Dual channel cable protection Instruction manual & parts list (German + English) With side safety door (doors can be moved backwards)

Condition: used, Single-Column Eccentric Press WEINGARTEN Type EV 63 Machine No. 738 / 61 Year of manufacture: 1962 Pressing force: 63 tons Throat depth: 260 mm Table size: 630 x 530 mm Table opening: Ø 210 mm Ram area: 315 x 260 mm Adjustable ram stroke: 8–100 mm Ram adjustment: 63 mm Ram shank bore: Ø 40 mm, with clamping piece Installation height: max. 450 mm Strokes per minute: 115 spm Air requirement: min. 4.5 bar Motor power: 4 kW Electrical connection: 380 Volt, 50 Hz Table height above floor: approx. 750 to 900 mm - Electric stroke release via foot switch or two-hand control - Overload protection by shear plate - Clutch-brake combination via WEINGARTEN friction-threaded clutch with TDC safety - Front crankshaft support bearing - Press table height adjustable via 2 threaded spindles - Manual central lubrication system - Free-standing electrical cabinet - UVV (accident prevention regulations) for manual loading operations Space requirements (L x W x H): 1750 x 1600 x 2430 mm Laedok S Htxjpfx Ancea Weight: 4.5 tons In good condition

Condition: new, neu ca. 4 Monate ab Auftragse Italien 63500 € 1200.15 € 70 to 500 mm 900x700 mm 600 mm 25 mm/s 6 mm/s 4 kW 1140 mm 940 mm 2350 mm 4-pillar guide ram guide round table and ram with T-slots 2 hand operation Siemens PLC manometer users manual Light barrier € on Request Siemens touchscreen-control, 50 programsstoreable, for programming: • Upstroke and downstroke quota • Break time in the bottom • time of Decompression • setting pressure of work • Pieces counter • prestop in upstroke and downstroke • setting for movement in manual and in automatic • management of alarms and anomalies € on Request Working hour counter € on Request Stroke counter € on Request Decompression valve € on Request Oil cooler with decompreission valve € on Request Lajdpfoynnfpjx Ancea Pressur switch € on Request

Condition: new, neu ca. 4 Monate ab Auftragse Italien 103500 € 1956.15 € 150 to 500 mm 1250x1000 mm 600 mm 23 mm/s 4 mm/s 5.5 kW 1520 mm 1270 mm 2500 mm 4-pillar guide ram guide round table and ram with T-slots 2 hand operation Siemens PLC manometer users manual Light barrier € on Request Siemens touchscreen-control, 50 programsstoreable, for programming: • Upstroke and downstroke quota • Break time in the bottom • time of Decompression • setting pressure of work Lodpfx Aneynm Icscjaa • Pieces counter • prestop in upstroke and downstroke • setting for movement in manual and in automatic • management of alarms and anomalies € on Request Working hour counter € on Request Stroke counter € on Request Decompression valve € on Request Oil cooler with decompreission valve € on Request Pressur switch € on Request

Condition: new, neu ca. 4 Monate ab Auftragse Italien 74800 € 1413.72 € 100 to 500 mm 1000x800 mm 600 mm 26 mm/s 5 mm/s 4 kW 1260 mm 1060 mm 2400 mm 4-pillar guide ram guide round table and ram with T-slots 2 hand operation Siemens PLC manometer users manual Light barrier € on Request Siemens touchscreen-control, 50 programsstoreable, for programming: • Upstroke and downstroke quota • Break time in the bottom • time of Decompression • setting pressure of work • Pieces counter • prestop in upstroke and downstroke • setting for movement in manual and in automatic • management of alarms and anomalies € on Request Ledpfxjynm H So Ancjaa Working hour counter € on Request Stroke counter € on Request Decompression valve € on Request Oil cooler with decompreission valve € on Request Pressur switch € on Request

Condition: used, pressing force: 30 t, machine/vehicle number: DF0139, pressure:30 t passage width:1000x1000 mm stroke:800 mm total power requirement:3 kW weight of the machine ca.:5 t dimensions of the machine ca.:3360x1300x1360 mm return capacity:3 t column diameter:75 mm Lodpsfxykhofx Anceaa traversing speed:bis 200 mm/sec. :0-10 mm/s :200 mm/sec table height over floor:900 mm distance table - lower edge of ram:1000 mm :126 mm diameter of piston:71 mm

Condition: new, Year of construction: 2019, machine/vehicle number: DF0362, pressing force: 250 t, pressure:250 t passage width:1800 mm stroke:600 mm total power requirement:22 kW weight of the machine ca.:24 t dimensions:ca. 3390 x 3400 x 3800 mm column diameter:160 mm Laodpfjfxyinsx Ancoa return capacity:25 t max. working heidht:800 mm Table dimensions:1800 x 1600 mm :2350 x 1600 mm table height over floor:900 mm hydraulic table shift:25 mm/sec table load:5 t pre-running speed:10 mm/sec pressure speed:10 Return Speed:25 mm/sec speed rapid traverse:10 mm/sec :600 l Oil cooling (electric):1,5 kW (max) :46er / 10 my Monitor SIEMENS:10 Zoll

Condition: as good as new (ex-display), Year of construction: 2016, pressing force: 160 t, pressure:160 t stroke:600 mm total power requirement:7,5 kW weight of the machine ca.:7 t draw back pressure:16 t :1 Stück Column-Diameter:160 mm dayligth:800 mm table surface area:1200 x 800 mm :400 mm table height:850 mm Laedpfofxyi Iox Ancja table load:5 t pre-running speed:1 bis 9,8 mm/sec return speed:1 bis 9,8 mm/sec quantity of oil:220 l

Condition: new, Year of construction: 2017, machine/vehicle number: DF0152, pressing force: 80 t, pressure:80 t stroke:500 mm total power requirement:12 kW weight of the machine ca.:5,1 t Controll:Zweihandbedienung cylinder:1 work height max.:800 mm working area:800 x 800 mm Table dimensions:800 x 800 mm pestle plate:2800 x 1300 mm table height:800 mm pre-running speed:9,8 mm/sec work speed:9,8 mm/min return speed:18 mm/sec :700 mm Column-Diameter:75 mm :10 kW main drive:WEG 15 kW Laodpfx Ajfxyh Hsncja pump:REXROTH, Parker elektronische Axialkolbenpumpe kW :25 (bei280bar) t :200 mm :30 mm :80 mm/sek. :REXROTH/Parker :REXROTH/Parker :300 L :ca. 250 L :über PLC (Mindestdruck 10 to :zur Ölabkühlung ? mit Elektroventilator :manuell, über Schmiernippel oder Kartuschen :SIEMENS / MOELLER :auf Schwenkarm :automatisch über 2 Handbetrieb mit Schlüsselschalter, manuell über Bedienpult im Einrichtbetrieb :Zweihandbedienung beweglich, :zur Datenübertragung :Siemens für Fernwartung :zur Hublängeneinstellung :0 ? 10 sec. Oil tank capacity:150 l :800 mm lang, vorne und hinten, 300 mm unten diagonal

Condition: new, Year of construction: 2019, machine/vehicle number: DF0329, pressing force: 350 t, pressure:350 t passage width:3000 mm stroke:900 mm total power requirement:75 kW weight of the machine ca.:60 t dimensions:2660 x 5400 x 5700 mm return capacity:35 t Table dimensions:3610 x 1600 mm :3610 x 1600 mm table height over floor:900 mm pre-running speed:230 mm/sec return speed:170 mm/sec :2000 l max. working heidht:1700 mm pressure speed:21 mm/sec speed rapid traverse:200 mm/sec Lasdofxygzjpfx Ancja Oil cooling (electric):3 kW (max) :S7 1500 Monitor:WEG 12 Zoll

Condition: used, Year of construction: 2001, machine/vehicle number: H01-3129, pressing force: 200 t, pressure:200 t passage width:1300x1300 mm stroke:1000 mm total power requirement:37 / 5,5 kW weight of the machine ca.:29500 kg dimensions of the machine ca.:2600x3000x5200 mm speeds::450 mm / freier Fall Laodpofhcc Nefx Ancoa speeds::20 mm/sek tracking travel:130 / 60 ms oil pressure :283 bar capacity of oil tank:2200 L

Condition: used, Year of construction: 2017, pressing force: 500 t, pressure:500 t passage width:1300x800 mm stroke:600 mm weight of the machine ca.:18 t dimensions of the machine ca.:2400 x 2400 x 5500 m draw back pressure:50 t Controll:Zweihandbedienung cylinder:1 Stück Laedpfx Ajd E Irmoncoa motor:50 kw Oil Cooling:elektrisch column diameter:200 mm work height max.:700 mm Table dimensions:1900 x 800 mm table height over floor:1000 mm pestle plate:1300 x 800 mm pre-running speed:150 mm/sec work speed:5-10 mm/sec. return speed:150 mm/sec :1500 l quantity of oil:1400 l