Used Universal Filling Device for sale (17,317)

Condition: used, Year of construction: 2008, Universal filling machine, Fritsch, model UFG-EPA-08RHG-NL20 Nlsdoz A Saiopfx Af Seg Year of manufacture: 2008

Condition: good (used), For sale is a universal length measuring device with numerous accessories from the brand Helios, in good, used condition, as can be seen in the pictures. Technical data: Nsdpezxiv Nofx Af Selg • Manufacturer: Helios Messtechnik • Type: 27 773 001 • Control model: Unitron 2 CHA • Universal length measuring device / adjustment device / shaft measuring device • With numerous accessories for various measurements • Mounted on a workshop trolley with contents (See pictures) • Condition: Used, functional (The cable or connector of the control unit would need to be replaced, presumably not original; the display turns off after a few seconds) Shipping costs via freight forwarder: approx. €140 International buyers are welcome! You will receive an invoice with VAT shown. Inspection / collection is possible by arrangement in 42855 Remscheid. Sale from location 42855 Remscheid, free on board. Subject to errors in technical data and prior sale.

Year of construction: 2022, operating hours: 1,500 h, condition: like new (used), functionality: fully functional, machine/vehicle number: 0070, We are selling a virtually new vertical universal brush tufting machine. The machine was manufactured by WOMAtec in 2022 and has seen very little use. Technical specifications: Type: DANY 1.0 Stroke: 70 mm Filament length: max. 150 mm Filaments: synthetic, bristles, and natural fibers, wire filaments and abrasive filaments Filament box: 1 color, needle dividing system Tufting tool: none Performance: approx. 100 cycles per minute Operating mode: intermittent operation and continuous operation Operation via foot switch Consisting of: ■ solid, welded steel frame ■ powerful main drive ■ wire spool and wire feed Nsdezzwxwopfx Af Solg ■ filament box with pressure plate ■ durable tufting tool ■ loop tufting system with needle divider ■ adjustable table for flat brushes Table for cup or roller brushes available upon request ■ painted in Prussian blue RAL 5010, light gray RAL 7035

Year of construction: 1989, condition: used, Technical details: Pressure max.: 30 MPa volume flow rate: 70 cbm/min. electrics - voltage/frequency: 380 / 3Ph ~ V/Hz tank capacity: 50 dm³ l machine weight approx.: 120 kg connected load: 0,62 kW dimensions L x W x H: 0,7 x Ø 600 x 1,3 m Nlsdpfeu Nft Hsx Af Ssg Application: Pressing grease into grease nipples Size of grease reservoir: 460 x 620mm Size of the press Ø 345 x 540mm Connection via bayonet mount Handling/operation with hand gun and 3.8 metre hose with ON/OFF switch The grease gun is mobile, equipped with handrail with two-hand grip and 220 V socket. *

Condition: used, Tool presetting machine GILDEMEISTER-DE VLIEG, type EGS 5045 / Microset DPS 100 Serial No. 83-10-102, Year of manufacture 2002 Travel X-axis: approx. 400 mm Travel Z-axis: approx. 400 mm Tool holder in the mounted rotary table: Ø 50 mm Pitch circle diameter of the tool holders in the mounted rotary table: Ø 340 mm Internal taper in the mounted rotary table: Ø 245 mm Tool holder plate as a rotary table with 8 mounting holes Ø 50 mm Centering diameter of the mounted tool holder plate: Ø 102 mm Rotatably mounted flange with centering diameter: Ø 102 mm Rotatably mounted flange with outer diameter: Ø 155 mm Rotatably mounted flange with 3x M10 mounting holes, pitch circle: Ø 130 mm Nodpfx Ajhbal Dsf Solg Mains connection: 230 volts, 50 Hz - Measuring electronics Microset DPS 100 - Rotary table with 8 tool positions - Interfaces: 1x RS232, 2x measuring system (X/Z) - Profile projector with screen Ø 100 mm, magnification 20x and two circle ground glass screens - Ground glass screen fixed with crosshair - Axis movement via manual quick adjustment with pneumatic clamping - Fine adjustment via handwheels - Rotatable rotary table with pneumatic clamping - Metal base with 3 drawers Footprint L x W x H: 1100 x 1000 x 800 mm Weight: 400 kg Good condition

Condition: like new (used), Year of construction: 2021, fuel type: gasoline, empty load weight: 68 kg, Several very neat joint filling machines for sale: Weight: 68 kg Honda engine, petrol with water connection. 8 brushes. Nledpfx Afezc R Uco Sjg height adjustable. Price: € 1.250,- incl. VAT Several in stock!

Condition: excellent (used), For sale: precision measuring instrument UNIVERSAL CONCENTRICITY GAGE, manufactured in the USA, designed for measuring concentricity, runout, straightness, and inspection of rotating components. The set comes complete with a Blankenhorn 0.01 mm or Käfer 0.01 mm dial gauge (Made in Germany). Features a stable base, precise guides, and a holder with micrometric adjustment. The technical condition is very good – the equipment is fully operational, sourced from a German quality control department. Technical data: • Manufacturer: Universal Gage Co., USA • Model: Universal Concentricity Gage • Accuracy: 0.01 mm • Measuring range: approx. 0–100 mm • Gauge: Blankenhorn / Käfer – Made in Germany • Condition: used, functional, very good Nledpfxjxtwxuj Af Ssg

Condition: used, Year of construction: 2005, Overview This SIDEL SBO 20 Universal Combi blows, fills and caps PET bottles in one integrated block. The system was manufactured in 2005 and started production in 2006. It is designed for sparkling mineral water and flavoured sparkling mineral water with high CO2 content in 1.0 l, 1.25 l and 1.5 l PET bottles. A HEUFT Spectrum TX 180 fill-level and cap-presence inspector and a single-lane bottle conveyor complete the scope. The machines are still installed and under power and can be inspected by appointment. Technical data - Current capacity: 28,000 bph in 1.0 l, 1.25 l and 1.5 l PET - Maximum filler speed: 30,000 bph - Application: blowing, filling and capping of PET bottles Nledpfx Aez A Am Tof Ssg - Products: sparkling mineral water and flavoured sparkling mineral water with high CO2 content - Neck finish: 26/22 GME 30.40 - Preforms processed: rPET Luxpet - Bottle formats: 1.0 l (82.5 mm diameter, 271 mm height) and 1.5 l (86 mm diameter, 326 mm height) - Moulds are not included in the scope of supply Scope of Delivery - PET Blow Moulder | SIDEL | SBO 20 UNIVERSAL | 20 mould stations, quick change for shell moulds | 2005 - Oven | SIDEL | UNIVERSAL | Linear oven with Olicorp, 24 heating modules | 2005 - Blowing Wheel | SIDEL | For 20 moulds, PCC drive, Siemens CE electrical cabinet | 2005 - Transfer Device | SIDEL | Between blow moulder and filler | 2005 - Isobaric Filler | SIDEL Simonazzi | SELEC 515 FMG 120-15C | 120 filling valves, pitch 113 mm, max. 30,000 bph | 2005 - Capper | Zalkin | HYSTERESIS H6 | 15 heads, quick change of the chucks, cap type 26/22 | 2005 - Cap Feeder | SIDEL Gebo | For flap cap 28 and 26/22, tilting device to the capper chute, 42,000 bph | 2005 - Bottle Conveyor | Single-lane conveyor at the combi exit, length to be discussed - Fill Level and Cap Inspection | HEUFT | SPECTRUM TX 180 HBBVXTI60 | Fill level and cap presence control | 2006 - Spare and Format Parts | All available spare parts and specific format parts included Condition Good working condition, still installed and under power. Preventive and corrective maintenance is carried out annually by the in-house maintenance team and, where required, by SIDEL. Driving panels and computer, the electrical and mechanical drawings, service and maintenance manuals and the spare parts books are part of the supply. The equipment is sold as it stands and is to be dismantled. Availability In production until 27 November 2026. Dismantling is planned for week 49/2026, craning out and loading from the beginning of December 2026.

Condition: excellent (used), Year of construction: 2003, Haver & Boecker SWA/MECII-20 Loading device  Haver & Boecker SWA/MECII-20 Loose loading device with scale for loading trucks or wagons with bulk material Suitable for free-flowing, non-dusty bulk materials  Description Brand: Haver & Boecker Type: SWA/MECII-20 Year: 2003 Temperature limits: -10 ° C / 40 ° C Voltage: 230V Frequency: 50 Hz Pneumatic pressure: 5 bar; Max 40 kg Min 10 kg Dimensions: Section I L2.43 x W187 x H310 Section II L240 x B240 x H310 Haver Nettowage with rack Weighing and evaluation electronics MEC II-20 for control of weighing and/or machine functions Advantages - high operating comfort - easy programmability - PTB and OIML approval Nsdpfxsg Sfa Tj Af Sslg - 99 product type memories - Operator guidance via plain text display in 6 selectable languages BT 15 operating terminal For automatic remote product type adjustment,  incl. motorised adjustment of bag length/width parameters. Financing through our bank is also possible. komplett-konzept.leasingo.de Further articles - new and used - can be found in our shop! International shipping costs on request!

Condition: excellent (used), Filling device for packaging chips mobile suspension crane maximum extension height: 3.30 meters load capacity approx. 10 kg 4 lockable swivel castors Nlodpfxoylknbo Af Sog

Condition: good (used), Cartridge holder with shut-off valve Nlsdpfx Afey Tk Tne Seg Application: Butyl extruder Width: 450 mm Diameter: 80 mm Weight: 2.6 kg Condition: good, second-hand

Condition: used, Year of construction: 1980, functionality: fully functional, travel distance X-axis: 1,600 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 1,100 mm, spindle speed (max.): 1,200 rpm, spindle speed (min.): 15 rpm, spindle mount: MK 5, throat depth: 2,000 mm, quill diameter: 76 mm, quill stroke: 600 mm, type of input current: three-phase, total length: 4,040 mm, total height: 2,900 mm, table width: 900 mm, input voltage: 380 V, total width: 2,800 mm, table length: 1,200 mm, drilling depth: 600 mm, rotational speed (max.): 1,200 rpm, rotational speed (min.): 15 rpm, spindle diameter: 80 mm, feed length W-axis: 600 mm, rapid traverse X-axis: 3,450 m/min, rapid traverse Y-axis: 3,450 m/min, rapid traverse Z-axis: 3,450 m/min, Equipment: documentation/manual, SORALUCE ALF 80 A Universal Drilling and Milling Machine Year of manufacture: 1980 · Heidenhain ND70 · Extensive original documentation For sale is a robust and versatile SORALUCE ALF 80 A universal drilling and milling machine, manufactured in 1980. The machine is suitable for demanding drilling, reaming, and milling operations, as well as for machining larger and heavier workpieces. Due to its solid construction, the ALF 80 is particularly suitable for classic machine, plant, steel, and special machine construction. The machine features a Heidenhain ND70 position indicator. Extensive original operating instructions and technical documentation from SORALUCE are available. Equipment / Accessories In addition to the machine, the offer includes an extensive accessory package, so that the SORALUCE ALF 80 A can be used for various machining tasks. Among other things, the following are included: Large, solid clamping angle for vertical or angular clamping and machining of workpieces Extensive selection of tool holders and tool attachments Nlsdpfxozl Rqhe Af Ssg Various clamping devices Additional existing tools and machine accessories Heidenhain ND70 position indicator Original SORALUCE operating instructions Technical documentation Foundation and installation documents The large clamping angle can be seen in the machine photos. Thanks to the extensive accessories, the machine offers a significant practical added value compared to a machine without the corresponding tool attachments and clamping devices. The exact scope of the accessories can be viewed during an inspection. On request, further detailed photos of the accessories can be provided. Technical data Manufacturer: SORALUCE Model: ALF 80 A Machine type: Universal drilling and milling machine Year of manufacture: 1980 Machine no.: 55/5-110 Travel distances / Working area Cross travel: 1,600 mm Longitudinal travel of table: 1,100 mm Longitudinal travel of table without steady rest: 1,400 mm Vertical travel: 1,200 mm Longitudinal travel of drilling spindle: 600 mm Largest distance between spindle and steady rest: 2,000 mm Work table Useful area: 900 × 1,200 mm Spindle Drilling spindle diameter: 76.2 mm Spindle diameter for milling: 128.57 mm Tool holder: Morse taper MK 5 Number of speed stages: 24 Speed range: 15–1,200 rpm Feeds Drilling spindle / Faceplate: 9 feed stages 0.036–2 mm/rev Spindle box / Slide: 9 feed stages 0.072–4 mm/rev Rapid traverse: Drilling spindle / Faceplate: 600–1,725 mm/min Spindle box / Slide: 1,200–3,450 mm/min Faceplate Design: detachable Diameter: 430 mm Largest face turning diameter: 750 mm Adjustment of face turning slide: 150 mm Motorization Main brake motor: 10 hp Coolant motor: 0.25 hp Dimensions and weight Overall length: 4,040 mm Overall width: 2,800 mm Overall height: 2,900 mm Net weight: approx. 9,200 kg Equipment / Accessories Heidenhain ND70 position indicator Original SORALUCE operating instructions Technical documentation Foundation and installation documents Available accessories and tools for the drilling machine, by arrangement Due to its solid, heavy construction, the machine is of particular interest to companies that are looking for a reliable conventional drilling and milling machine for large workpieces. Inspection possible by appointment. We will gladly provide further photos, technical documents and detailed information.

Year of construction: 2025, condition: new, The universal assembly and adjustment device (HSK 63) for securely clamping all types of aggregates outside the machine—regardless of the design and machine interface. In addition to maintenance work on the aggregate, shank tools or complete tool sets can be reliably mounted and set up, whether in the aggregate itself, in tool holders, or on milling arbors—quickly, precisely, and safely. Nsdpfjxmb Nwjx Af Solg Thanks to compatibility with all standard machine interfaces, the device can be used flexibly, independent of the position and number of locking or support pins on the aggregate. Even tool holders with nesting turbines fit without issue. Whether it’s angle adjustments on the swivel unit, adjusting tool positions on the tracing aggregate, or tool changes on a multi-spindle drilling head—our assembly and adjustment device is THE essential tool for every workshop with a CNC machine. - Simple handling of aggregates of various designs - Suitable for all common machine interfaces - Safe clamping and alignment of tools - Universal use in assembly, service, and production - Robust construction for permanent use Availability: immediately from stock Warehouse location: Flörsheim

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1985, machine/vehicle number: 8444-08, workpiece length (max.): 6,000 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Maximum edge length: 6,000 mm Maximum material thickness: 1.25 mm Mechanical cutting device Hydraulic unit Flow rate of gear pump: 14.5 l/min Operating pressure: 140 bar Maximum pressure: 210 bar Electric motor power: 3 kW Motor speed: 1,450 rpm Voltage: 380 V Frequency: 50 Hz Oil tank capacity: 30 l Pressure gauge diameter: 63 mm Pressure gauge display range: 0–250 bar Pressure switch: 90 bar Hydraulic components Gear pump CPL 9 DQ Intermediate flange L25-2/004 Nlsdpfx Afszy Ndce Ssg Elastic coupling G 228/2P Return filter Fill and vent filter Oil level indicator Drain plug Glycerine pressure gauge Valve block with pressure, flow control, braking, and solenoid valves Hydraulic cylinders Number of hydraulic cylinders: 8 Type: GHZ-50 × 225-S spec. Piston rod with external thread M20 Length: 20 mm Swivel bearing at the rear Hydraulic motors Number of hydraulic motors: 4 Type: OMP 50 MACHINE DETAILS Control system Electrical machine control with operator panel (OP) Adjustable dwell times, angle ranges, and shutdown delays Variant control for different machine functions EPROM-based control Electrical supply Mains voltage: 380 V Frequency: 50 Hz EQUIPMENT Hydraulic unit OP-14 SM 8 hydraulic cylinders GHZ-50 × 225-S spec. 4 hydraulic motors OMP 50 Gear pump CPL 9 DQ Valve block with hydraulic valves Return filter Fill and vent filter Oil level indicator Glycerine pressure gauge Pressure switch Electrical OP control Hydraulic and electrical circuit diagrams

Year of construction: 2020, operating hours: 10 h, condition: like new (used), functionality: fully functional, Automatic line for rinsing, filling, pasteurizing, drying and packaging of glass juice bottles consisting of following modules: 1. SEMI AUTOMATIC DEPALLETIZER (model: Depal 512 – mini) for unpacking glass bottles from pallets, 1 operator required to put the pallet into the machine and remove the cardboard that is inserted in between the glass bottle layers 2. UNIVERSAL RINSING MACHINE (model: IND-Wash 56 S2) for steam sanitizing and hot water rinsing of the bottles before filling 3. ROTARY FILLING MACHINE (model: IND-Dose 46 PO-12) for filling of the hot product into the glass cylinder shape bottles 4. CLOSING MACHINE FOR TWIST OFF CAPS (model: IND-Close 12E) for vacuum closing of the filled bottles using steam injection induced vacuum system 5. PASTEURIZATION AND COOLING TUNEL (model: PT 42-9) for further continuous pasteurization of the product 6. VACUUM TESTING MACHINE (model: IND-Test 61) for selection and eviction of the improperly closed bottles 7. DRYING MACHINE (model: IND-Blow 86) for drying the residual moisture on the battle surface before applying labels 8. LINEAR LABELLING MACHINE FOR APPLICATION OF SELF-ADHESIVE LABELS (model: IND-Lab 32B) with top (over the cap) and side application of the labels on cylindrical bottles 9. AUTOMATIC GROUPING AND SHRINK-WRAPPING MACHINE WITH TRAY AND FILM (model: IND-pack 29 T) for packing the bottles onto cardboard trays in various configurations per different bottle sizes Nsdpfezdr Ilsx Af Selg 10. SET OF FLAT TOP CHAIN CONVEYORS (model: IND-Trans 71) connecting the various modules of the line (conveyors between rinsing, filling and closing sections with top covers)

Condition: like new (used), Year of construction: 2022, operating hours: 100 h, functionality: fully functional, machine/vehicle number: 20225203648, load capacity: 12 kg, arm reach: 1,300 mm, pivoting range: 360 °, Universal Robots UR10e – hardly used, solely for testing purposes We offer a Universal Robots UR10e in excellent condition. This cobot has only been used for testing purposes and therefore has very few operating hours. The UR10e comes with the latest available software version and is ready for immediate use. Multiple UR10e cobots in stock We currently have several UR10e cobots in stock. This allows us to offer various configurations and price levels. Are you looking for, for example: 1. a cheaper, older, or more used UR10e? 2. a newer cobot with very few operating hours? 3. or even a completely unused UR10e that has never been unpacked? Nsdpfozudb Sex Af Selg Please feel free to contact us. We can also create a combined order when purchasing multiple robots. The stated price is for the individual UR10e cobot. Depending on your application, we can also supply the UR10e as a complete robotic solution. For example, we can supply the UR10e as: Welding cobot – complete welding solution with a Fronius welding power source Dedicated sanding cobot – a sanding setup specifically developed for your products and production process Automatic sanding cobot – our standard Talen Robotics automatic sanding cobot Thanks to our experience in robotics and industrial automation, we can help you choose the right UR10e and configuration for your application. Are you looking for a specific age, condition, software version, or a particular number of cobots? Contact us – we may have exactly the right UR10e in stock for you.

Condition: used, Complete Industrial Filling, Weighing & Roller Conveyor System Complete industrial filling and container handling system, previously used in an industrial production environment. The system consists of a stainless steel filling station combined with powered roller conveyors, weighing/control equipment, and automated controls. Main equipment includes: Stainless steel filling station Powered roller conveyor system Mettler Toledo weighing and control equipment Mettler Toledo operator/control panels Siemens SIMATIC PLC control system Hitachi SJ200 frequency inverter SEW geared motors Vector Aandrijftechniek geared motors Stainless steel electrical/control cabinets Product filling connections and hoses Operator platform with stainless steel safety railing Nedpfxjz Diute Af Solg Local operator control panels Safety equipment and emergency stops Nomafast high-speed industrial door Associated electrical and mechanical equipment The system appears to have been designed for the automated handling, positioning, weighing, and filling of containers/drums in an industrial production process. Condition: Used industrial surplus Availability: Complete system as shown in the pictures Location: Rotterdam, The Netherlands The complete system is available for sale. Dismantling and loading can be discussed. This equipment is industrial surplus and is sold as-is, without warranty or claims. Please contact us for further information or to make an offer.

Condition: good (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: 0520090257, center height: 230 mm, spindle bore: 58 mm, swing diameter over cross slide: 270 mm, spindle speed (max.): 2,000 rpm, spindle speed (min.): 30 rpm, type of input current: three-phase, swing diameter over bed slide: 460 mm, turning diameter over cross slide: 270 mm, overall weight: 1,810 kg, turning diameter: 460 mm, turning diameter over bed slide: 460 mm, input voltage: 400 V, rotational speed (min.): 30 rpm, rotational speed (max.): 2,000 rpm, total height: 1,370 mm, total length: 2,750 mm, total width: 1,080 mm, bed width: 300 mm, quill diameter: 60 mm, quill stroke: 130 mm, distance between centers: 1,500 mm, workpiece length between centers: 1,500 mm, Torno Mecânico Convencional C6246VX / 1500mm - Ano 2020: Torno mecânico universal com 460mm de giro sobre a bancada e 1500mm entre pontas. Motor trifásico 400V/50Hz. Equipado com visor digital (DRO) de 2 eixos, torre porta-ferramentas de mudança rápida, sistema de refrigeração e proteção de segurança articulada no fuso. Máquina em bom estado de conservação, adquirida em 2020 e utilizada em ambiente de I&D. Ideal para oficinas de manutenção, ferramentaria ou produção de pequenas/médias séries. O comprador deve organizar/tratar da recolha. IVA incluído no preço Nlsdpfxezxrkio Af Sog Conventional Mechanical Lathe C6246VX / 1500mm - Year 2020: Universal mechanical lathe with 460mm swing over bed and 1500mm between centres. Three-phase motor, 400V/50Hz. Equipped with a 2-axis digital readout (DRO), quick-change tool post, coolant system, and a hinged safety guard over the spindle. Machine in good condition, purchased in 2020 and used in an R&D environment. Ideal for maintenance workshops, toolrooms, or small/medium-batch production. Buyer must arrange collection. VAT included in price.

Condition: used, Year of construction: 2021, functionality: fully functional, overall weight: 34 kg, load capacity: 10 kg, arm reach: 1,300 mm, We offer this used Universal Robots UR10e collaborative robot, manufactured in 2021. Model: UR10e Nledpsz Ap Adofx Af Seg Serial number: 202·5000196 Date of manufacture: January 30, 2021 Weight: 33.5 kg Weight: 73.9 lbs Enclosure rating: IP54 Maximum payload: 10 kg Maximum payload: 22 lbs Maximum reach: 1300 mm Maximum reach: 51.2 inches Product type: Industrial Functional safety PL: PL d (ISO 13849-1) If you have any questions or require further information, please feel free to send us a message.

Year of construction: 2003, condition: ready for operation (used), This machine tool was manufactured in 2003. The Dürr Universal 71C features a comprehensive setup including a work tank, flood tank, continuous distillation, and an automatic sliding door. It also boasts a vacuum unit for drying, a condensate tank, and a drying cooler. Optional equipment like a control panel and ultrasound enhances its versatility. A great opportunity to buy this Dürr Universal 71C machine tool. For more information about this machine tool, please reach out to us. Additional equipment • Scaffolding with cladding • Work tank // Flood tank 1 // Condensate tank // Flood tank 2 • Continuous distillation • Automatic sliding door Nedpozzn Hxjfx Af Sjlg • Water separator • Bogie without cover • Storage with drive • Drying cooler • Vacuum unit - drying process // Vacuum unit // Vacuum filling/emptying device • HD - IFW Circulation filtration including chip rinsing • 6 baskets included Machine Benefits Technical Machine Benefits • Control panel • Ultrasound (1 rod transducer) • Heating fb2 • Hgz 028 cooling unit • Reinforced cooling (hgz 064 cooling unit and cooling coils in fb1, fb2, desti. ) • Filling/emptying device for fb2 • Dummy for fb2 • Preservation equipment • Single filter for fb1 // filtration for fb2 • Automatic feeding Extra Information Machine still under power

Year of construction: 1993, condition: ready for operation (used), A solvent cleaning system AMA Universal is offered for cleaning, degreasing and drying metal and plastic parts. Inspection by appointment possible. Number of monitoring channels: 8, Solvent fill quantity: approx. 160l, Solvent weight: approx. 194kg, Tank volume: approx. 105l, Max. basket load: 80kg, Cycle capacity: up to 80kg/cleaning cycle, Cycle time: approx. 20min, Working chamber diameter: approx. 450×610mm, Loading opening diameter: approx. 450mm, Drum diameter: approx. 510mm, Drum depth: approx. 600mm, Air flow rate: 230m³/h, Steam pressure: 5bar, Steam temperature: 149°C, Water pressure range: 3-5bar, Compressed air connection: 6-7bar, Control: PLC. Inspection by appointment possible. Nedpfozhw S Dsx Af Selg

Condition: used, Universal Shaker Accessories / Clamping Devices Nljdpfx Afezpya Hs Sjg For sale is a used accessory set for an electrodynamic shaker or vibration test stand. The set consists of numerous solid aluminum clamping devices, angle adapters, adapter plates, clamping blocks, retaining elements, precision chucks, and other accessories for vibration testing. The components are ideally suited for individual test specimen setups, special designs, and use in vibration test stands. Technical data: Manufacturer: unknown Type: Accessory set for electrodynamic shaker / vibration test stand Material: predominantly aluminum Design: Clamping devices, angle adapters, adapter elements, and fasteners Equipment: Several clamping devices Angle adapters of various sizes Precision adapter elements Clamping blocks Adapter plates Aluminum rings Retaining and fastening elements Solid aluminum constructions Precision-engineered components Threaded holes and clearance holes Universally applicable Further accessories as shown in the pictures Application areas: Electrodynamic shakers Vibration test stands Vibration testing Material testing Environmental simulation Research and development Automotive industry Aerospace Test specimen setups and special designs Scope of delivery: Complete accessory set as shown in the pictures Clamping devices Angle adapters Adapter plates Clamping blocks Adapter elements Aluminum rings Further accessories as shown in the pictures Condition: Used. Visual condition as shown in the pictures. Normal wear and tear, scratches, and pressure marks are present due to age. Transport: Only the accessories shown in the pictures are sold. The table shown in the pictures and other items not explicitly mentioned are not included in the sale. Shipping on a pallet or collection is possible. Subject to changes, errors, and prior sale. We will gladly answer any further questions by telephone.

Condition: used, Universal Shaker Angle Adapter / Adapter Devices For sale is a used accessory kit for an electrodynamic shaker or vibration test stand. The kit consists of various solid aluminum angle adapters, adapter plates, clamping devices, clamping blocks, and other accessories. The components are ideally suited for individual test specimen mounting, special designs, and use on vibration test stands and vibration testing systems. Technical data: Manufacturer: unknown Type: Accessory kit for electrodynamic shaker / vibration test stand Material: predominantly aluminum Design: angle adapters, adapter plates, clamping devices, and fasteners Equipment: Several solid angle adapters Adapter plates of various sizes Clamping and fastening devices Clamping blocks and adapter elements Fastening material and other accessories as shown in the pictures Solid aluminum construction Threaded holes and clearance holes Universally applicable Areas of application: Electrodynamic shakers Vibration test stands Vibration testing Material testing Environmental simulation Research and development Automotive industry Test specimen mounting and special designs Scope of supply: Complete accessory kit as shown in the pictures Angle adapters Adapter plates Clamping devices Clamping blocks Fastening material Other accessories as shown in the pictures Condition: Nodpfezpx Ucex Af Sjlg Used. Visual condition as shown in the pictures. Normal signs of wear and tear, as well as scratches and indentations, are present. Transport: Only the accessories shown in the pictures are sold. The table or other items not explicitly mentioned in the pictures are not included in the sale. Shipping on a pallet or collection is possible. Subject to changes, errors, and prior sale. We will gladly answer any further questions by telephone.

Condition: used, Year of construction: 2021, functionality: fully functional, overall weight: 3,700 kg, type of input current: three-phase, Equipment: documentation/manual, For sale: BERNARDO URS 1000 N universal cylindrical grinding machine, year of manufacture 2021. The machine is virtually new and has only been used a few times. It was originally purchased as part of an expansion of our machining capabilities. Following a change in the company's business profile, the machine was not put into regular production. The sale is therefore not related to any technical fault or machine failure. The machine is in excellent condition with minimal signs of use. It is designed for precision external cylindrical grinding as well as internal grinding. With a distance between centres of 1000 mm and a grinding diameter of up to 320 mm, it is suitable for toolrooms, machining companies, shaft production and refurbishment, machine-part manufacturing and small-batch production. Direct sale by the machine owner – SAWA Electronic, Poland. Nodpfx Aozz Nbwef Sjlg Main technical data: year of manufacture: 2021 distance between centres: 1000 mm centre height: 180 mm external grinding diameter: 8–320 mm maximum workpiece weight: 150 kg internal grinding diameter: 30/35–100 mm maximum internal grinding depth: 125 mm workhead spindle speed: 25–220 rpm grinding wheel: 400 × 50 × 203 mm grinding spindle speed: 1670 rpm internal grinding spindle speed: 10,000 rpm grinding head swivel range: ±30° hydraulic table feed digital position readout power supply: 400 V machine weight: approx. 3700 kg overall dimensions: approx. 3700 × 1900 × 1500 mm Equipment includes: internal grinding attachment 3-jaw chuck Ø200 mm steady rests coolant system digital readout grinding wheel dressing device grinding wheel balancing equipment Price: PLN 75,000 net + VAT Price: EUR 17,500 net + VAT Machine location: Regimin, Mazowieckie, Poland. Inspection and machine demonstration possible by prior arrangement.

Condition: used, Year of construction: 2004, Seven UNIVERSAL MC flat knitting machines are available as a package, 1) UNIVERSAL MC-825 CXL, gauge: E3, year of manufacture: 2004, width: 64in/1630mm, 2) UNIVERSAL MC-835, gauge: E5, year of manufacture: 2004, width: 48in/1220mm, 3) UNIVERSAL MC-720, gauge: E5, year of manufacture: 1995, width: 90in/2300mm, 4) UNIVERSAL MC-720, gauge: E8, year of manufacture: 1995, width: 90in/2300mm, 5) UNIVERSAL MC-720 PJ, gauge: E8, width: 90in/2300mm, 6) UNIVERSAL MC-720 PJ, gauge: E10, width: 90in/2300mm, 7) UNIVERSAL MC-720, gauge: E10, width: 90in/2300mm, documentation partially available, an on-site inspection is possible, not connected to power. Nlsdpsz Euc Eefx Af Seg