Used Tetra Pak Ultra Filtration Uf for sale (4,511)

Condition: excellent (used), Year of construction: 2010, Ultrafiltration plant for fermented products 3 Main items: 1) Thermization unit 2) Ultrafiltration (UF) for fermented milk 3) Cooler and Silo. The line is used to produce Quark/Skyr. The thermization and ultrafiltration unit are also suitable for producing other fermented and concentrated dairy products such as: Skyr, Mascarpone, and Double Cream cheese. Key data: - Input: 3,500 - 5,000 liters per hour of fermented skim milk, full-fat milk, or enriched products. - Concentration factor: 1.8-2.5 1) Thermization unit Complete skid-mounted thermization unit. Ledpfez Imdaox Ab Ajru Flow rate: 3,500 up to 5,000 liters (depending on the product). Manufacturer: Tetra Pak Temperature cycle: Input: 21-30 °C (incubation temperature) -> recuperation (permeate cooler) -> thermization at 55/60°C or pasteurization at 72/95 °C -> holding -> output to ultrafiltration at approx. 45 °C. Complete unit including: * Stainless steel frame in which everything is pre-assembled. * Closed balance tank with spray bowl. * Centrifugal product pump, stainless steel casing, flush seal, type: LKH. * Plate heat exchanger, 4 stages, new, Tetra Pak, Clip6-SR Model. * Control box with all connections for sensors and pneumatic valves. * Holding tube for 5,000 liters per hour, adjustable by connecting more or fewer tubes: 30 seconds up to 180 seconds in 9 stages. 2) Ultrafiltration unit Manufacturer: Tetra Pak Type: Tetra Alcross US P&F Serial number: T5845810096 Year: 2010 Capacity: Input up to 5,300 liters/hour Description: Concentrates yogurt or fermented milk to achieve the desired composition and texture. The UF separates the product into retentate and permeate. The retentate is the product, with proteins and fat (if included) concentrated. The advantage of this design of UF (compared to spiral-wound UF and separators) is that it is suitable for fermented products with and without fat. Also, all proteins are concentrated (even whey proteins). This results in high pressures in the system; filtration can only be achieved with a plate and frame filtration system with flat FR60pp filters and rotary piston circulation pumps. Some example products that can be made with this system: Input: skim milk 9% TS -> output approx. 16% TS (Skyr). Input: 20% TS including fat -> output: cream cheese or mascarpone. Input: pre-concentrated fermented skim milk up to 12% TS -> output up to 18% TS (Quark). The limiting factor is the permeate output. Approximate permeate per stage: Stage 1: 1100-1755 liters/hour, 13.5 m2 filters. Stage 2: 675/1170 liters/hour, 9 m2 filters. Stage 3: 320/585 liters/hour, 4.5 m2 filters. Stage 4: 300/585 liters/hour, 4.5 m2 filters, 15 bar. Filter: plate and frame type, manufacturer: Tetra Pak - DDS, model: M37 Complete unit including: * Stainless steel frame. * 2 balance tanks with spray bowl (feed and permeate return). * Feed pump Tetra LKH. * 4 circulation loops including circulation pumps. First stage with centrifugal pump, 3 stages with Waukesha 320-U2 rotary piston high-pressure pumps. Last stage up to 15 bar pressure for highly viscous products. 3) Quark silo, cooler, and pump. Manufacturer: Schwarte-Milfor Type: Quarksilo Serial number: 3580 Year: 2011 Capacity: 5,000 liters Description: Robust conical design for very viscous products. Insulated. Hermetic, ultra-clean with sterile air. Sensors for level and temperature. On inlet: - Plate cooler Manufacturer: Tetra Model: Clip line C6 Thermal cycle: 45 -> approx. 18°C

Condition: used, Year of construction: 2006, Overview This Tetra Pak Tetra Fino Aseptic filling line, manufactured in 2006, is designed for the filling of UHT milk and other liquid food products in pillow-shaped aseptic cartons (Tetra Fino® 1000 ml format). The system enables aseptic filling of ultra-pasteurized products, allowing extended shelf life without refrigeration. With a capacity of approx. 3,600 packs per hour, the line is suitable for small to medium-capacity dairy production. The line consists of a bag forming and filling machine, conveyor systems, and a carton closing module, with manual packing into boxes. The equipment is currently in production and reported to be in good condition. Technical data - Manufacturer: Tetra Pak - Machine type: Aseptic carton filling line (pillow pack) - Format: Tetra Fino Aseptic 1000 ml - Year of manufacture: 2006 - Operating hours: approx. 18,625 h - Capacity: approx. 3,600 packs/h - Filling stations: 1 - Filling system: tbc - Filling type: Aseptic filling - Product: UHT milk (example: 137°C / 4 sec) Suitable for liquid food products Equipment - Aseptic filling machine (bag forming from roll) - Conveyor system for package transport - Conveyor system for carton handling - Manual packing station (bags into cartons) - Automatic carton closing module (SOCO System, year 2014, approx. 740 h) - 1 m mesh conveyor (outfeed for full cartons) - Roll handling trolley (for heavy packaging rolls) - Aseptic filling valves (ABC Valve) Lrsdpfx Asy Sh Tveb Aju

Condition: used, Year of construction: 2017, functionality: fully functional, machine/vehicle number: D714 HDB, Tetra Pak Tetra Centri D 714HGV Separator Lrjdpfjzy Riyjx Ab Aju Manufacturer: Tetra Pak Model: Tetra Centri D 714HGV Machine Type: High-Capacity Centrifugal Separator Year of Manufacture: 2017 Capacity: Approx. 22,000 L/hr Condition: Used – Fully Functional Application: Dairy / Milk / Cheese Processing Location: Ireland Description Tetra Pak Tetra Centri D 714HGV high-capacity centrifugal separator, manufactured in 2017 and previously installed in a large-scale dairy and cheese production facility. The D 714HGV is an industrial centrifugal separator designed for continuous processing in demanding dairy applications. The machine is suitable for high-throughput separation duties and can be used in milk, cream and other dairy-processing applications depending on its configuration. The unit is offered for sale following the decommissioning of the production facility and represents an opportunity to acquire a modern Tetra Pak separation system from an operational industrial plant. Key Specifications Manufacturer: Tetra Pak Model: Tetra Centri D 714HGV Year: 2017 Capacity: Approx. 22,000 L/hr Type: Industrial centrifugal separator Condition: Used Status: Fully functional prior to removal Industry: Dairy / Food Processing Previous Application: Cheese / Dairy Production Location: Ireland Suitable for a range of industrial dairy-processing applications, including: - Milk separation - Cream separation - Dairy processing - Cheese production - Whey processing - Food and beverage processing - High-throughput centrifugal separation Inspection: Available by appointment.

Condition: used, Year of construction: 2011, Technical Specifications & Performance Data This 20,000 L aseptic tank is engineered for hygienic storage and buffering in beverage production and industrial packaging environments. It combines a newly manufactured pressure vessel with proven aseptic system heritage, making it a strong solution for second hand installations and used bottling line upgrades. Nominal capacity: 20000 L Design pressure: 0.09 to −0.1 MPa (positive pressure and full vacuum range) Pressure test pressure: 0.12 MPa Design temperature: 148 °C Main body material: S31603 stainless steel (food-grade corrosion resistance) Manufacturing year (tank body): 2025 Tank year: 2011 from Tetra Pak Engineering standard: GB/T 150-2024 (pressure vessels) System heritage: Tetra Pak aseptic module lineage for beverage applications Advanced Automation & Control Systems The tank is prepared for seamless integration into automated process control architectures typical of modern beverage production lines. Instrumentation ports and valve interfaces support level, pressure, and temperature monitoring, as well as aseptic steam-in-place (SIP) and clean-in-place (CIP) routines. The system documentation set includes activation and sequence diagrams and a communication description for S7-based control, supporting PLC/HMI connectivity, interlocks, and recipe-driven operation. PLC-ready signals for level, pressure/vacuum, and temperature Interfaces for aseptic valve clusters and CIP/SIP circuits Safety interlocks for pressure and vacuum protection Documentation for commissioning and parameterization Production Line Integration Capabilities Designed to function as an aseptic buffer or storage tank between thermal processing (e.g., UHT) and downstream filling. It can operate standalone or inline within a complete packaging line and is suitable for beverage production environments handling PET, glass, or carton filling operations. Format changes are minimal since storage capacity and process parameters are recipe-controlled. Inline integration with UHT, aseptic valve manifolds, and fillers Lrsdpfxox E Tbfj Ab Aeu Standalone operation for batch buffering and sterile hold Compatible with CIP/SIP plant utilities and sanitary piping Ideal for modernization of a second hand or used bottling line Machine Condition & Maintenance History The pressure vessel (tank body) is newly manufactured in 2025, paired with system documentation and aseptic process lineage originating from a 2011 Tetra Pak aseptic system. The unit is offered as second hand equipment and is ready for operation upon proper installation and commissioning. Availability of technical manuals supports maintenance planning, preventive routines, and efficient start-up. Body is new (2025) with documented pressure test and design ratings Provided with technical manuals, preventive maintenance references, and flow/layout documents Prepared for swift recommissioning in industrial packaging facilities Operational Performance & Versatility Engineered for hygienic and aseptic conditions, the tank provides stable pressure/vacuum capability for sterile storage.

Condition: used, Year of construction: 2006, operating hours: 62,000 h, machine/vehicle number: R78, Technical Specifications & Performance DataThe Used filling machine TETRA PAK A3 Flex 1L slim 7500 bph is a 2006 aseptic form‑fill‑seal system designed for high-efficiency beverage production in cartons. Built by Tetra Pak®, it delivers precise, reliable filling for dairy and juice in Tetra Brik formats, making it a strong fit for industrial packaging operations seeking predictable uptime and hygienic performance.* Manufacturer: Tetra Pak®* Model: A3 Flex (Year 2006)* Category: Filling Machine – aseptic carton FFS* Nominal speed: up to 7,500 packs/hour* Machien Hours: 62.000 Hours* Container type: Brik (aseptic carton); format range subject to installed tooling* Product compatibility: Dairy (e.g., UHT milk), Juice (with/without pulp, low to medium viscosity)* Filling principle: Aseptic, volumetric dosing* No. of valves / heads: 1* Machine configuration: Linear (rotation: 0)* Changeover: Recipe-based format adjustments to minimize downtime* Safety features: Integrated guarding and interlocks* Documentation: Operator and technical manuals availableAdvanced Automation & Control SystemsFully PLC-controlled with an HMI interface, the A3 Flex provides recipe management, alarm diagnostics, and batch logging for robust traceability. The control platform supports connectivity with plant SCADA/MES for data acquisition and performance monitoring. Standardized I/O facilitates integration with upstream UHT/sterilization and downstream end-of-line equipment. Built-in safety circuits, interlocked doors, and emergency stops help protect operators during rinsing, filling, and downstream handling processes. Electrical and pneumatic interfaces are designed for common EU industrial standards.Production Line Integration CapabilitiesThis machine integrates seamlessly within a used bottling line or mixed packaging environment. It interfaces with upstream product treatment (UHT, homogenization, CIP/SIP) and downstream carton conveyors, checkweighers, inkjet date coders, case packers, and palletizers. While dedicated to cartons, it can share utilities, controls, and data infrastructure alongside parallel PET, glass, or aluminum can lines that include rinsing, filling, capping, and labeling machines. Format changes within the Brik family are completed via guided procedures and recipes to reduce changeover time and waste.Machine Condition & Maintenance HistoryCurrent status: UNDER MAINTENANCE. This second hand Tetra Pak A3 Flex is undergoing scheduled servicing to verify aseptic integrity, dosing accuracy, and sealing performance. Key wear parts are inspected and replaced as required. As part of the A3Flex-100V Upgrade, the machine was enhanced with the addition of 1 AB CPU, 2 AB network modules, 1 AB input module, 1 AB output module and 1 GE communication module. The equipment was upgraded from Danaher servo to AB’s latest servo, with 7 Danaher motors replaced by AB motors, together with network cables, communication cables, connectors and 2 pull ear motor bases. Maintenance logs, test reports, and commissioning checklists can be provided. Manuals are included to support rapid start-up and operator training.Automation and Servo Upgrade: The equipment has been upgraded from... Lodpfo Adt S Asx Ab Aeru

Year of construction: 2005, condition: used, Fabricant : Alfa Laval Model : Tetra pak C10-SM Year : 05 Type : Échangeur à plaque Application: pasteurizer Fluid group: 2 Volume: 533 L Pressure: 0/16.0 bar Lredpfsx R A Edex Ab Aou Temperature: 0 / 110°C Sections: 5 Plates: 64 units

Condition: used, Year of construction: 2003, Used Shrink Wrapper Tetra Pak year 2003 1200 bundles/hour The Used Shrink Wrapper Tetra Pak year 2003 1200 bundles/hour shrink-wraps products efficiently. Consequently, its fully automated structure and production capacity of 1200 bundles per hour ensure high performance. Technical and Functional Specifications The Used Shrink Wrapper Tetra Pak year 2003 1200 bundles/hour operates with a continuous motion system, thereby maintaining a steady production flow without interruptions. Moreover, the wrapping process applies shrink film, effectively packaging bottles, cartons, and other containers. In addition, the system supports high-speed production lines, thus minimizing downtime and optimizing operational efficiency. Furthermore, the machine incorporates a straight inline feed system, which allows it to adapt to different conveyor speeds while integrating seamlessly with other machinery in the bottling line. As a result, this configuration simplifies integration into existing plants without requiring complex structural modifications. Shrink Film Characteristics In particular, the Used Shrink Wrapper Tetra Pak  applies standard shrink film, thereby eliminating the need for printed film support. As a consequence, this design increases flexibility in packaging material selection and significantly reduces operating costs. Therefore, the machine remains suitable for diverse industrial applications. Lsdpfx Ajv Ew Iwjb Asru Bundling Capability Notably, the bundling system of the Used Shrink Wrapper Tetra Pak creates packs with or without trays, depending on the chosen configuration. Additionally, the machine accommodates various container formats, including bottles, bricks, and cartons, thereby providing high flexibility in production management. Since it runs at 20 bundles per minute, the system efficiently delivers 1200 bundles per hour, making it an excellent choice for high-production plants aiming to optimize workflow. Consequently, businesses can enhance their operational throughput significantly. Shrink Tunnel The Used Shrink Wrapper Tetra Pak includes a high-efficiency shrink tunnel, which ensures uniform sealing and tightening of the film around the bundle. Additionally, the system regulates temperature control, thereby guaranteeing optimal shrinkage without damaging packaged products. As a result, this feature preserves packaging quality and minimizes production waste effectively. Operating Conditions and Safety of the Used Shrink Wrapper Tetra Pak At present, the Used Shrink Wrapper Tetra Pak year 2003 1200 bundles/hour remains in storage condition, thus making it ready for reinstallation and operation. Furthermore, the system incorporates safety devices that protect operators during use, thereby minimizing accident risks and ensuring compliance with industrial regulations. Manufactured in 2003, the Used Shrink Wrapper Tetra Pak continues to provide an efficient, robust, and easily integrable packaging system. Moreover, its modular structure and compatibility with various packaging materials make it a versatile solution for multiple sectors in the food and beverage industry. Ultimately, this machine enables companies to optimize their packaging operations while maintaining high standards of safety and efficiency

Condition: used, Year of construction: 2004, operating hours: 28,000 h, machine/vehicle number: TP117, Technical Specifications & Performance Data The Used Tetra Cap Applicator TCA45 is a robust, single-head cap application unit from Tetra Pak®, engineered for reliable operation in beverage production environments and seamless integration within a used bottling line. Purpose-built for continuous industrial packaging, it offers steady output with precise cap application after filling and before packing. Manufacturer: Tetra Pak® Model: TCA 45 TETRA PACK Year of manufacture: 2004 Nominal speed: up to 7,500 bricks/hour No. of heads: 1 Cap type: OEM code 4 (per manufacturer specification) Rotation direction: OEM code 0 (per manufacturer specification) Category: Capping Machine / Cap Applicator Placement: downstream Tetra Pak filling, upstream final packaging Container compatibility: Tetra Pack bricks with appropriate change parts Typical products: water, juice, beer, wine, and other still beverages Documentation: manuals available Safety: integrated safety features included Advanced Automation & Control Systems Designed around an industrial PLC with a user-friendly HMI, the TCA45 facilitates stable, repeatable cap application. Recipe-based settings support format recall, and process alarms help operators maintain consistent performance. Torque control, cap presence verification, and fault diagnostics contribute to cap quality and minimize rework in high-speed beverage production. PLC/HMI control for straightforward operation and monitoring Automatic fault detection with guided troubleshooting Integration-ready I/O for upstream filling and downstream packing synchronization Electrical: built for standard industrial power supplies (details per manual) Machine guarding with interlocked access doors and emergency stop circuits Production Line Integration Capabilities This cap applicator is well-suited to second hand or newly engineered used bottling line projects. It interfaces efficiently with infeed/outfeed conveyors, bottle orienters, fillers, and labelers, ensuring balanced line flow and minimal downtime. Compatible with Tetra pak fillers. Communication-ready for line control and buffer management Machine Condition & Maintenance History The unit is currently under maintenance, undergoing inspection and service to verify core functions and safety systems. Wear components are being checked and adjusted as needed to align with expected performance at up to 7,500 bricks/hour. OEM manuals are available to support commissioning, operation, and preventive maintenance schedules. Operational Performance & Versatility Optimized for consistent, high-quality capping, the TCA45 supports a broad mix of beverage formats common in industrial packaging. With suitable change parts, it can handle PET and glass bottles as well as aluminum containers, making it versatile for diversified production runs. Suitable applications: water, juice, beer, wine, functional drinks, and similar beverages Stable cap application to support product integrity and shelf-life Ljdpsyhblvsfx Ab Asru Gentle handling...

Condition: used, Year of construction: 2014, operating hours: 180 h, machine/vehicle number: FA54, Used Shrink Wrapper Tetra Pak year 2014 9000 bricks/hour Lrsdpfxo Adyxvj Ab Aju Introduction to the Used Shrink Wrapper Tetra Pak year 2014 9000 bricks/hour This machine is a used shrink wrapper model 32, manufactured by Tetra Pak in 2014. It handles the secondary packaging of aseptic carton containers, which manufacturers commonly use for liquid food products. Currently, operators have stored the unit, and they classify it as fully automatic, featuring a straight-line feed system. Moreover, it has only 180 hours of operation, which ensures minimal wear and high reliability. In terms of productivity, the machine reaches a performance level of 9,000 bricks per hour. Supported package configurations The Shrink Wrapper 32 offers a high degree of flexibility in terms of package configurations. Consequently, it adapts well to a variety of operational setups. It supports multiple layouts, including 3×1, 3×2, 3×3, 4×1, 4×2, 4×3, 5×1, 5×2, and even the Straw configuration for packs with pre-applied straws.As a result, this versatility makes the machine suitable for integration into modern, high-capacity Tetra Pak filling lines. Furthermore, it enables seamless transitions between different packaging formats without compromising efficiency. Compatibility with the 200 ml EDGE format This model works specifically with the Tetra Pak EDGE 200 ml format, which remains a standard choice for juices, dairy, and ready-to-drink products. In addition, the EDGE format requires both precision handling and consistent film application—criteria the Shrink Wrapper 32 fulfills reliably.Therefore, by combining this format with the various supported configurations, operators can address a wide range of packaging needs. Additionally, this compatibility enhances line flexibility and product presentation.As a result, the Used Shrink Wrapper Tetra Pak year 2014 9000 bricks/hour serves as a high-performing option for technical teams aiming to maintain speed and versatility. Operating features and safety systems of the Used Shrink Wrapper Tetra Pak The system opera...

Condition: used, Year of construction: 2011, operating hours: 14,000 h, machine/vehicle number: LC660, Used Tetra Pak A3 speed 030V 200 slim Filling lineTechnical Specifications & Performance DataThis complete used bottling line is a Tetra Pak A3 Speed (030V) configuration dedicated to 200 ml Slim cartons. It is a second hand, overhauled industrial packaging solution engineered for consistent performance in beverage production. All core components are manufactured by Tetra Pak for seamless compatibility and robust uptime.Main filler: Tetra Pak A3 Speed (030V), year 2011Container format: 200 ml Slim cartons (0.2L)Production capacity: 24,000 packs/hourRecorded hours: Filler 25,731 h; Accumulator 1,609 h; Straw applicator 14,219 h; Case packer 21,065 hLine status: Used and overhauledManufacturer: Tetra Pak (all included machines)Container type: Carton (brick-style)Included models: A3 Speed 030V filler; ACHX 30 accumulator; SA30 straw applicator; CBP30 Speed case packerAdvanced Automation & Control SystemsThe line benefits from Tetra Pak’s integrated automation philosophy, bringing reliable controls, intuitive operation, and coordinated start/stop logic across the equipment set. Operator interfaces provide clear status visualization, guided changeovers for the 200 ml Slim format, and recipe-based parameter management. Safety interlocks and guarded access points help protect operators while maintaining fast serviceability. The coordinated control across filler, applicator, accumulator, and packer reduces bottlenecks and supports stable high-speed operation in demanding packaging environments.Production Line Integration CapabilitiesDesigned for inline operation, this packaging machinery set delivers smooth product flow from filling through secondary packaging. The accumulator supports continuous production by buffering short downstream stops, while the straw applicator and case packer complete the distribution-ready presentation. The system can interface with upstream and downstream conveyors, printers, and palletizing solutions to form a complete production line.Machine typeManufacturer / ModelYearFilling MachineTetra Pak A3 Speed 030V2011Straw ApplicatorTetra Pak SA302011Accumulation SystemTetra Pak ACHX 302011Case PackerTetra Pak CBP30 Speed2011Machine Condition & Maintenance HistoryThis second hand Tetra Pak used bottling line has been overhauled and is presented in working con... Lrsdpfx Abo Adtx Ao Aeu

Condition: used, Year of construction: 1991, The Tetra Pak TBA 9 is a type of filling machine designed for the aseptic packaging of liquid food products. Here are some key details: - Type of Packaging: The TBA 9 is known for its ability to handle a variety of liquid products, such as juices, dairy, and sauces, using Tetra Pak's carton systems. - Capacity: This filler typically has a capacity range suitable for small to medium production lines. It can fill various carton sizes, including the 200 ml format. - Aseptic Technology: The TBA 9 uses advanced aseptic technology to ensure that products are safely packaged without the need for preservatives, extending shelf life while maintaining product integrity. - Features: - High efficiency and low waste during the filling process. - Flexibility to switch between different carton formats and sizes. - User-friendly interface for easy operation and monitoring. - Applications: Ideal for products that require long shelf life and minimal refrigeration, making it popular for juices, milk, soups, and other liquid foods. This TETRA PAK TBA 9 carton former and filling machine with an aseptic chamber is used for long life products. Previously this machine was used to fill chocolate milk in Cartons of 200 ml. Ledpoz Hrnnjfx Ab Asru The line consists Tetra Brick Aseptic 9 200 ml filler Tetra Straw Applicator 21 Tetra Pak Shrink Wrapper and bundler The line is still installed and will be dismantled upon request or the buyer can send there own team to dismantle Working Hours: 5,809 Hours Format: 250 ml slim Version: v 100 Condition: Good Shrink Wrapper: Mariani Closer and bundler: IPF Conveyors: Included

Condition: used, Year of construction: 2005, operating hours: 16,412 h, machine/vehicle number: R96, Used Tetra Pak A3Flex 1000 Base - Year 2005Technical Specifications & Performance DataThe Tetra Pak A3/Flex 1000 Base is an aseptic carton filling machine designed for industrial packaging and beverage production. It forms, fills and seals carton packs in a controlled filling process, supporting efficient integration into an aseptic carton packaging operation.Manufacturer: Tetra PakModel: A3/Flex 1000 BaseDrawing specification: 648576-0100Year of manufacture: 2005Advanced Automation & Control SystemsThis filling machine is intended for automated carton handling, forming, filling and sealing within an industrial packaging line. The A3/Flex platform supports coordinated operation with upstream product preparation and downstream conveying, packing and coding equipment.Production Line Integration CapabilitiesSuitable for use as the central filling station in an aseptic carton production line, this machine can be integrated with carton handling conveyors, accumulation systems, secondary packaging machinery and line control equipment. Aseptic carton filling technology is widely applied in beverage production and other liquid-food packaging operations where sealed carton packs are required.The machine can be positioned downstream of product processing and upstream of conveying, coding and final packaging equipment. Integration should account for product supply, carton material handling, discharge conveyors and synchronization with downstream industrial packaging machinery.Machine Condition & Maintenance HistorySpare parts will be replaced as needed. This maintenance approach supports continued machine serviceability and helps maintain operational readiness for a second hand aseptic filling installation.Operational Performance & VersatilityThe Tetra Pak A3/Flex 1000 Base is built for automated carton filling applications. As part of a used bottling line or carton packaging operation, this type of equipment provides a dedicated solution for producing filled and sealed carton packs while supporting consistent handling through the filling and discharge stages.Installation Requirements & Site PreparationInstallation requires a suitably prepared production area with access for product feeding, packaging-material supply, electrical connection and discharge conveyor integration. Site planning should also allow adequate access for operation, cleaning, maintenance and replacement of service parts.Safety Standards & Compliance CertificationSafe installation and operation require the machine to be integrated with appropriate guards, operator access controls and emergency-stop provisions for the complete production line. Before commissioning, all safety devices, utility connections and hygiene-related operating procedures should be checked as part of the site acceptance process. Lode Adttyspfx Ab Asru

Condition: used, Year of construction: 2014, operating hours: 4,908 h, machine/vehicle number: LC658, Used Tetra Pak A3 Speed V40 250ml Prisma filling lineTechnical Specifications & Performance DataThis used bottling line is a complete Tetra Pak aseptic carton solution centered on the A3 Speed filler. Engineered for industrial packaging and beverage production, it delivers high output with precise handling of Prisma cartons. All core modules share the same manufacturing year, providing a cohesive and modern second hand system suitable for efficient aseptic operations.Production speed: up to 24,000 packages/hourPrimary format: 0.25L Prisma cartonContainer type: Carton (aseptic brik)Filler: Tetra Pak A3 Speed, version 040V, year 2014, working hours 4,908Accumulator: Tetra Pak ACHX 30, version 070V, year 2014, working hours 5,528Straw applicator: Tetra Pak SA30, version 040V, year 2014, working hours 5,821Case packer: Tetra Pak CBP30 Speed, version 030V, year 2014, working hours 38Filling process: Aseptic carton fillingManufacturer: Tetra PakAdvanced Automation & Control SystemsThe line combines Tetra Pak engineering across all modules for synchronized operation and high uptime. Centralized operator interfaces and coordinated control logic simplify start-up, ramp-up, and stop sequences, while ensuring consistent product and package quality across the filling, straw application, accumulation, and case packing stages. Format handling for 0.25L Prisma cartons is streamlined with fast, repeatable adjustments and clear operator guidance.Integrated line control for coordinated speeds and bufferingOperator-friendly HMI on core equipmentAutomated interlocks across modules for safe operationRecipe-based format management for 0.25L Prisma cartonsProduction Line Integration CapabilitiesDesigned as an inline solution, this used bottling line accommodates continuous flow from aseptic carton filling to secondary packaging. The accumulator provides essential buffering to keep the filler running during short downstream stops. The straw applicator and case packer complete a compact, high-throughput configuration for beverage production.Machine typeManufacturer / ModelYearFilling MachineTetra Pak A3 Speed (040V)2014Various EquipmentStraw Applicator Tetra Pak SA30 (040V)2014Various EquipmentAccumulation System Tetra Pak ACHX 30 (070V)2014Case PackerTetra Pak CBP30 Speed (030V)... Lredpfx Abszmpzbo Aou

Year of construction: 2010, condition: used, machine/vehicle number: HO1, Used Tetra Pak 4.3 T aseptic homogenizerTechnical Specifications & Performance DataThis industrial homogenizer is engineered for high-pressure processing and reliable particle-size reduction across beverage and food applications. Manufactured by Tetra Pak, the TA200 platform is recognized for stable operation, hygienic design, and robust components suitable for continuous-duty production. This unit is associated with a 250 bar rating, aligning with common requirements for dairy, juice, and beverage processing prior to filling and packaging on a used bottling line or second hand industrial packaging system.Manufacturer: Tetra PakModel: TA200Pressure rating: up to 250 bar (as indicated on the machine type plate)Design intent: High-pressure homogenization for beverage productionCE marking: PresentAseptic capability: Includes preparation/upgrading to aseptic homogenizationApplication scope: Beverage production and industrial packaging linesAdvanced Automation & Control SystemsThe TA200 platform from Tetra Pak is designed to integrate with modern automation architectures used in beverage production. Typical interfaces support upstream and downstream synchronization with processing and bottling equipment. Operator-friendly controls and clear status indication help maintain repeatable results and reduce downtime.Integration-ready control interfaces for line automationProcess monitoring for pressure and flow stabilityDesigned for consistent homogenization performance at set pressureSafety interlocks aligned with industrial practiceProduction Line Integration CapabilitiesThis homogenizer is suitable for installation upstream of fillers and other bottling equipment within a used bottling line or a second hand beverage production plant. Its aseptic upgrade preparation supports integration into hygienic and ultra-clean process segments where product protection and shelf-life are priorities.Compatible with standalone or inline operationInterfaces with mixers, pasteurizers, and fillers in industrial packaging linesFlexible placement before filling of PET or glass containersSuitable for multi-product beverage workflowsMachine Condition & Maintenance HistoryThe unit is presented for sale with inclusion of preparation/upgrading to aseptic homogenization. It is positioned for rapid commissioning into beverage production environments. Routine maintenance practices can be applied in accordance with Tetra Pak guidelines to preserve performance and reliability.Commercially offered as a second hand industrial assetReady for operation subject to standard installation and commissioningOperational Performance & VersatilityHigh-pressure homogenization improves stability, mouthfeel, and product uniformity, enabling downstream filling into PET and glass packaging. The TA200 platform is widely used in beverage production where consistency and quality control are essential.Stable particle-size reduction at defined ... Lrjdpfjzd Ul Tsx Ab Aou

Condition: used, Year of construction: 2005, machine/vehicle number: LC688, Used Tetra Pak A3 Flex 1000 SQ filling line 7000 PPHTechnical Specifications & Performance DataThis used Tetra Pak A3 FLEX 1000SQ filling line is designed for industrial packaging and beverage production in carton packages. The main filling machine was manufactured in 2005 and is configured for the 1000SQ format, with a production capacity of 7000 packages per hour. The filler has been upgraded from 100V to 300V.Main filling machine: Tetra Pak A3 FLEXMain format: 1000SQAdditional format capability: 500SQ through a quick change kitProduction capacity: 7.000 packages per hourIncluded accessories: 2 paper reels and 1 paper trolleyAdvanced Automation & Control SystemsThe line is arranged as an integrated carton filling and packaging system. Its format-specific configuration supports coordinated operation between the filler, cap applicator, accumulation equipment and cardboard packing section. The A3 FLEX filler upgrade from 100V to 300V is part of the documented machine configuration.Production Line Integration CapabilitiesThis complete bottling line is configured for carton-package production, with equipment supporting filling, cap application, product accumulation and secondary cardboard packing. The 1000SQ format is the principal operating format, while the supplied quick change kit supports conversion to 500SQ. The ACHX30-50M accumulator is suitable for both 1000SQ and 500SQ formats, helping maintain flow between filling and downstream packaging operations.Machine typeManufacturer / modelYearFilling MachineTetra Pak A3 FLEX2005Capping MachineTetra Pak CAP30 FLEX2013Various EquipmentTetra Pak ACHX30-50M2015Case PackerTetra Pak CBP322008Various EquipmentPaper Reel TrolleyMachine Condition & Maintenance HistoryThe equipment is identified as used. The documented line includes components manufactured between 2005 and 2015, including the main A3 FLEX filler, the ACHX30-50M accumulator, the CAP30 FLEX cap applicator and the CBP32 cardboard packer. Used bottling line buyers can assess the individual machine configuration, installed formats and supplied accessories when planning recommissioning and integration.Operational Performance & VersatilityThe line is suited to carton filling applications requiring a 1000SQ package format and can be adapted for 500SQ operation with the included quick change kit. The C... Lrjdpe Adttmsfx Ab Aeu

Condition: used, Year of construction: 2005, machine/vehicle number: LC689, Used Tetra Pak A3 Flex 200S, 100V filling lineTechnical Specifications & Performance DataThis used Tetra Pak A3 Flex filling line is configured for the 200S carton format and is centered on a Tetra Pak A3 Flex 100V filling machine manufactured in 2005. The line includes coordinated downstream equipment for carton handling, straw application and cardboard secondary packaging.Filler: Tetra Pak A3 Flex, version 100V, year 2005Line format: 200SAccumulator: Tetra Pak ACHX30-50M, year 2010Straw applicator: Tetra Pak SA22, year 2009Cardboard packer: Tetra Pak CBP32, year 2009Included accessories: 2 paper reels and 1 paper trolley supplied with the fillerAdvanced Automation & Control SystemsThe filling line is arranged as an integrated industrial packaging system, with the accumulator supporting product flow between filling and downstream operations. The equipment configuration is intended to coordinate filling, carton handling, straw application and cardboard packing within a continuous production process.The Tetra Pak A3 Flex filler is identified as version 100V, with the possibility of an upgrade to 150V. Any upgrade scope should be assessed against the required packaging configuration and operating requirements.Production Line Integration CapabilitiesThis Tetra Pak carton filling line combines the principal stages required after carton filling: buffering, straw application and secondary cardboard packaging. The included paper reels and paper trolley support the handling and loading of packaging material for the filler.Machine typeManufacturer / modelYearFilling MachineTetra Pak A3 Flex 100V2005Various EquipmentTetra Pak ACHX30-50M2010Various EquipmentPaper ReelVarious EquipmentPaper TrolleyVarious EquipmentTetra Pak SA222009Case PackerTetra Pak CBP322009The modular arrangement makes this second hand filling and industrial packaging line relevant for beverage production applications using the specified 200S carton format. It can be integrated with suitable upstream product preparation and downstream end-of-line handling equipment according to plant requirements.Machine Condition & Maintenance Histor... Ledpfj Adttaox Ab Ajru

Condition: used, Year of construction: 1995, operating hours: 26,000 h, machine/vehicle number: LC668, Used Tetra Pak TBA 8 V100 1000ml slim, helicap 23Technical Specifications & Performance DataThis second hand Tetra Pak complete aseptic carton filling line is configured for dairy production in slim 1.0L Brik carton packages. The core of the line is a Tetra Pak TBA 8 V100 filling machine, manufactured approximately in 1995 and showing approximately 26,000 working hours. A total refurbishment was completed in 2026, followed by a test run and inspection.Main filling machine: Tetra Pak TBA 8 V100Package format: Slim 1.0L aseptic carton packageSpeed: 6.000 TP/hProduct application: Dairy productionYear of manufacture: approximately 1995Working hours: approximately 26,000 hRefurbishment: total refurbishment in 2026Advanced Automation & Control SystemsThe line is supplied as an integrated industrial packaging solution comprising filling, cap application, conveyor handling and wrap-around tray packing equipment. The Tetra Pak TCAP 45/47 cap applicator has been modified for HeliCap 23 and is designed to handle screw caps with pre-punched paper packaging material. The standard-layout conveyor installation provides product transfer between the listed process stages.Machines of this type are intended to operate as coordinated packaging machinery, enabling continuous movement of filled carton packs from the filler through closure application and secondary packaging. Final operational setup should account for the selected carton material, cap components, product process interface and required line controls.Production Line Integration CapabilitiesThis used bottling line is arranged for aseptic Brik carton handling rather than conventional PET or glass bottle processing. It combines a Tetra Pak filling machine with a dedicated screw-cap applicator, approximately 30 meters of conveyors and a tray packer for wrap-around trays. The equipment is suited to integration within a dairy beverage production and industrial packaging environment.Machine typeManufacturer / modelYearFilling MachineTetra Pak TBA 8 V1002001Capping MachineTetra Pak TCAP 45/47ConveyorsConveyorsWrap Around PackerTetra Pak TCBP 70The line can form a practical filling and end-of-line packaging section where cartons are filled, closed, conveyed and packed into wrap-around trays. Upstream dairy processing, hygienic product supply and downstream pallet handling can be matched to the requir... Lrsdjzwu Unopfx Ab Aou

Condition: used, Year of construction: 1998, operating hours: 26,000 h, machine/vehicle number: LC670, Tetra Pak TBA 19 V10 complete filling lineTechnical Specifications & Performance DataThe Tetra Pak Tetra Brik Aseptic is a used bottling line filling machine for aseptic carton packaging. Built approximately in 1998, this industrial packaging machine is configured for 125 ml Slim Brik containers. Its vertical packaging-web handling arrangement supports the forming, filling and sealing stages required for compact carton packs in dairy product production.Manufacturer: Tetra PakMachine identification: Tetra Brik AsepticApproximate year of manufacture: 1998Machine Hours: 26.000 HoursContainer type: Brik cartonFormat: 125 ml SlimProduct application: Dairy productsFilling technology: Aseptic carton fillingAdvanced Automation & Control SystemsThe machine is equipped with an operator control panel and an electrical/control cabinet for managing operating functions. Visible pneumatic lines, mechanical drive assemblies and adjustable mechanisms indicate an integrated automation layout for web transport, carton formation and package handling. Aseptic carton filling equipment of this type is designed to coordinate film registration, forming and sealing operations through a controlled production sequence.The machine includes accessible service areas, adjustment points and an elevated operator platform to support routine operation and format-related setup activities.Production Line Integration CapabilitiesThis Tetra Pak filling machine is suited to operation as the primary filling and forming unit within an aseptic carton packaging section for dairy products. It can be integrated with upstream product preparation and sterile product supply systems, as well as downstream carton conveyors, accumulation systems, coding equipment and secondary packaging machinery. The lower discharge and product-handling section supports transfer of filled Brik packs toward the next stage of the production line.Machine typeManufacturer / modelYearFilling MachineTetra Pak Tetra Brik Aseptic1998The 125 ml Slim configuration makes this second hand aseptic filling machine relevant for beverage production and dairy packaging operations requiring compact carton formats. Integration should be planned around compatible carton conveying, downstream packing equipment and the process utilities required by the wider aseptic packaging installation.Machine Condition & Maintenance HistoryThe machine is offered as used industrial packaging equipment and is classified as ready for operation. Its stainless-steel enclosure, access panels, service platform, guardrails, access ladder and adjustable leveling feet are visible. Buyers can assess the equipment within the context of t... Lrodpfx Aboz E Dg To Aou

Condition: excellent (used), TETRA PAK APPLICATOR TCA45 CONVERTED TO HELICAP27 1000 PRISMA YOM 2006 FULL COMPLETE EXCELLENT CONDITION DISMANTLED AND PACKED INTO TETRA BOX Lrodeuzv E Rjpfx Ab Aou VIDEO IN RUNNING CONDITION UNDER REQUEST

Condition: like new (used), TETRA PAK CARDBOARD PACKER CBP 32 VERSION 400 YOM 2010 2177 RUNNING HOURS ONLY!! MULTI PACKER FOR 200/250/1000 ml Ljdpfx Ajya I Sgeb Asru AS NEW CONDITION LOCATION - POLAND READY FOR SHIPPING

Condition: used, Year of construction: 2009, operating hours: 19,648 h, machine/vehicle number: LC666, Used Tetra Pak A3 CF 100V 250 prisma filling line - Year 2009Technical Specifications & Performance DataThis complete carton bottling line is configured for the 250 Prisma format and combines filling, accumulation, straw application and cardboard packing functions in a coordinated industrial packaging process. The line includes equipment manufactured between 2009 and 2012, with the principal filling machine identified as model A3 CF.Filling machine: A3 CF, manufactured in 2009, 100VAccumulator: ACHX30, manufactured in 2010Straw applicator: SA30, manufactured in 2012Cardboard packer: CBP32, manufactured in 2010, 400VProduction format: 250 PrismaIncluded handling equipment: 1 paper trolley set and 2 paper reelsThe configuration is designed around carton handling and secondary packaging rather than bottle processing, making it suitable for industrial packaging applications using Prisma-style carton formats.Advanced Automation & Control SystemsThe line is composed of dedicated processing and packing modules that support a sequential production workflow. The filling machine is specified at 100V, while the cardboard packer is specified at 400V. The accumulator provides a buffer between operations, helping to maintain material flow when downstream equipment requires short interruptions or adjustment time.The straw applicator performs a dedicated packaging operation after filling, supporting a practical carton presentation for end users. Electrical connection and control-system integration should be evaluated during installation to ensure correct synchronization between the individual modules.Production Line Integration CapabilitiesThis used bottling line is arranged as a carton filling and industrial packaging system for the 250 Prisma format. The equipment sequence supports filling, straw application, product accumulation and cardboard packing. The included paper trolley is intended for handling paper reels associated with carton production operations.Machine typeModelYearFilling MachineA3 CF2009Various Equipment - Accumulation SystemACHX302010Various Equipment - Straw ApplicatorSA302012Case PackerCBP322010Various Equipment - Paper Reel TrolleyThe modular layout allows the line to be assessed for integration with upstream product p... Lodpfx Ajzvl Uijb Ajru

Condition: ready for operation (used), TETRA PAK EASY RIDE CONTROLL BOX Can be used for any conveyor system Excellent condition Lrjdpfx Abjz Rlgyo Asu

Condition: excellent (used), functionality: fully functional, Alfa Laval / Tetra Pak Buttermilk Pasteurization Line Complete buttermilk pasteurization line from renowned manufacturers Alfa Laval and Tetra Pak, equipped with a buffer tank, circulation pumps, process valves, flowmeter, and control cabinet. The system is designed for hygienic thermal processing of buttermilk in dairy plants. Capacity: 25,000 liters/hour Main components of the line: 1. Siersma Scheffers Stainless Steel Buffer Tank Serial number: Karnemelk Year of manufacture: 1995 Capacity: 1,000 liters Overall dimensions: Ø 1100 × 3000 mm Material: stainless steel (s/s) 2. APV Valves (4 units) High-quality process valves for food applications 3. Pomac Centrifugal Pump, type: CP19555 / 165 x 10 Serial number: 20080 Year of manufacture: 2007 Capacity: 30 m³/h Power: 5.5 kW Dimensions: 700 × 350 × 450 mm 4. Endress + Hauser Flowmeter, model: Promag H / Promag 300 Dimensions: 350 × 200 × 200 mm Provides precise measurement of liquid food products 5. Samson Valve Dimensions: 560 × 300 × 300 mm Application: flow and pressure regulation in process systems 6. Alfa Laval / Tetra Pak Buttermilk Pasteurizer, type: C8-K8M Serial number: 30107-33855 Year of manufacture: 2012 Capacity: 559 liters Operating parameters: PS: 16.0 bar PT: 22.9 bar TS: 120 °C Dimensions: 3200 × 550 × 1850 mm High-performance heat exchanger system optimized for buttermilk processing 7. Hovap Centrifugal Pump, type: HP-5032/170 Serial number: 33740 Capacity: 35 m³/h Power: 7.5 kW Dimensions: 700 × 320 × 550 mm Lredpfx Abjxtvftj Aou 8. IPBE Control Cabinet (s/s) Purpose: control and supervision of the buttermilk pasteurization line Dimensions: 620 × 230 × 770 mm The Alfa Laval / Tetra Pak buttermilk pasteurization line with a throughput of up to 25,000 l/h is a complete, integrated system for the thermal processing of dairy products. Use of components from Alfa Laval, Tetra Pak, Pomac, Hovap, Endress + Hauser, and APV ensures high reliability, durability, and process quality.

Year of construction: 2018, condition: used, machine/vehicle number: AT89, Used Tetra Pak helix accumulator 44 meters year 2018 The Used Tetra Pak helix accumulator 44 meters year 2018 efficiently accumulates and manages the production flow in aseptic packaging lines. Notably, Tetra Pak manufactured this model, identified as ACHX10-0400-44, in 2018 to handle brick-type carton containers. Technical and Functional Features To begin with, the Used Tetra Pak helix accumulator 44 meters year 2018 accumulates containers using a helical system that extends 44 meters. Its primary function is to compensate for speed variations between upstream and downstream machines. As a result, it optimizes production flow and prevents plant downtime. Furthermore, the ACHX10-0400-44 model provides high temporary storage capacity and maintains a continuous container flow without compromising structural integrity. Additionally, the helical architecture optimizes available space and reduces footprint compared to other linear accumulation systems. Consequently, thanks to this configuration, the Used Tetra Pak helix accumulator 44 meters year 2018 ensures high operational efficiency with a reduced footprint, making it particularly suitable for lines with complex layouts. Ljdsyhbxpjpfx Ab Aoru Materials and Compatibility Moreover, the accumulator handles brick-type carton containers, ensuring gentle treatment that prevents deformations or damage to the packaging. In addition, the structure uses corrosion-resistant and easily sanitizable materials, thereby complying with food industry regulations. Similarly, the conveyor belts and internal components minimize friction, ensuring smooth container movement. Integration with the Production Line Importantly, the Used Tetra Pak helix accumulator integrates easily into existing packaging lines. This is primarily due to its compatibility with Tetra Pak filling and sealing machines. In particular, the advanced electronic control system synchronizes with production, dynamically adjusting the accumulation and release speed of containers based on operational needs. Consequently, this mechanism optimizes production flow management and significantly reduces the risk of congestion or slowdowns in the line. Operational Advantages By using the Used Tetra Pak helix accumulator manufacturers can significantly improve production efficiency. Specifically, it reduces machine downtime and optimizes overall plant performance. Furthermore, the compact and modular structure simplifies installation and maintenance, thus lowering operational costs. On top of that, Tetra Pak’s high-quality construction ensures system reliability, reinforcing the robustness and durability of its equipment. Conclusion of this Tetra Pak Accumulator All things considered, the Used Tetra Pak helix accumulator provides an advanced solution for managing production flow in aseptic packaging lines. Thanks to its storage capacity, operational efficiency, and compatibility with Tetra Pak systems, this model serves as an ideal option for plants requiring high performance and reliability in handling brick-type carton containers. Ultimately, it represents a reliable and effective investment for streamlining production processes.

Condition: used, Year of construction: 2009, operating hours: 2,503 h, machine/vehicle number: LC679, Used Tetra Pak TBA19 125 slim 7500 PPH - Year 2009Technical Specifications & Performance DataTetra Pak TBA/19 TBA 12SS (RCI) filling machine configured for aseptic carton filling and integrated straw application. Built in 2009 and reconditioned in 2017, this equipment is designed for high-output industrial packaging operations where accurate filling and reliable downstream pack presentation are required.Manufacturer: Tetra PakModel: TBA/19 TBA 12SS (RCI) 030V Production speed: 7,500 packs/hFunctions: Filling and straw applicationManufacturing year: 2009Reconditioned: 2017Documentation: Manuals availableAdvanced Automation & Control SystemsThis filling and straw application machine is intended for automated carton packaging workflows. The integrated process combines carton filling with straw application, supporting continuous product handling and coordinated operation within an industrial packaging line. Operators should verify interface configuration, safety circuits, utilities and control integration during installation and commissioning.Production Line Integration CapabilitiesSuitable for use as the primary filling station in a Tetra Pak aseptic carton packaging line. It can be integrated with upstream product preparation and supply systems, as well as downstream conveyors, accumulation equipment, secondary packaging machinery, coding systems and pallet handling equipment.Machine typeManufacturer / modelYearFilling MachineTetra Pak TBA/19 TBA 12SS (RCI)2009Various Equipment - Straw ApplicatorTetra Pak2009The machine supports streamlined handling of individual filled cartons and is suited to production environments requiring a compact filling and straw application process. Conveyor synchronization and downstream accumulation should be assessed according to the final packaging layout.Machine Condition & Maintenance HistoryThe machine was manufactured in 2009 and reconditioned in 2017. Manuals are available, supporting operation, maintenance planning and technical reference. The equipment is presented as ready for operation within a suitable prepared production environment.Operational Performance & VersatilityWith a stated capacity of 7,500 packs/h, this Tetra Pak machine is suited to beverage production and industrial packaging applications using carton packs. Filling and straw application are combined in the same equipment configuration, helping reduce handling steps between primary filling and consumer-ready pack preparation.As a second hand packaging solution, the machine can be considered for facilities seeking Tetra Pak c... Ledsz E Df Nspfx Ab Asru