Used Testo Testo 523 for sale (153)

Condition: used, Measuring device for air conditioning units, air conditioning systems, cooling units Lhodpfx Ajdz U Sljb Aon -Type: Testo 523 -with: various hoses -Quantity: 1x measuring device with case available -Dimensions: 490/400/H130 mm -Weight: 5.5kg

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, - Working width: 230mm - Working height: 150mm - Minimum length: 200mm - Spindle speed: 6000 RPM - 5 heads Ljdpfx Aez D Agvob Ajhn - Head arrangement: bottom / right / left / top / top - Motor power: 5.5, 7.5, 7.5, 7.5 kW - Feed motor power: 3.7 kW - Stepless feed speed adjustment: 6-24m/min - Spindle diameter: 40mm - Year of manufacture: 2014 - Weight: 4000 kg

Condition: ready for operation (used), Year of construction: 1957, functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS Testing area Diameter: 60 mm MACHINE DETAILS Manufacturer: Wolpert Type: Testor HT1A Year of manufacture: 1957 Ljdpj Ad Ih Sjfx Ab Aehn Machine number: 4,038 Machine type: Hardness testing machine Length: 500 mm Width: 350 mm Height: 1,350 mm Weight: 150 kg

Year of construction: 2015, condition: ready for operation (used), Three Rehm reflow soldering ovens for the printed circuit board industry are available. 1) 2x Rehm VXC basic 2450 Type 523, year of manufacture: 2015, power: 45kW, exhaust air: 1000m³/h, preheating zones: 5, peak zones: 2, cooling zones: 3, total process zone length: 2100mm, throughput capacity: approx. 100printed circuit boards/h, length: approx. 5000mm. 2) Rehm VXC basic 2100 Type 422, year of manufacture: 2014, power: 40kW, exhaust air: 1000m³/h, preheating zones: 4, peak zones: 2, cooling zones: 2, total process zone length: 2450mm, throughput capacity: approx. 115printed circuit boards/h, length: approx. 4300mm. The systems were thoroughly cleaned and serviced in December 2025. Documentation available. An on-site inspection is possible. Expected to be available from August 2026. Ledpfezghf Ejx Ab Aohn

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, Leadermac SMARTMAC LMC 523S Four-Sided Planer Manufacturer: Leadermac, Taiwan S/N 092323 Year of Manufacture: 07/2003 In good condition Working width: 230 mm Working height: 125 mm 5 spindles, spindle diameter: 40 mm Feed table: 2000 mm Configuration: 1st lower horizontal spindle: 7.5 kW 2nd right spindle: 5.5 kW 3rd left spindle: 5.5 kW 4th upper horizontal spindle: 7.5 kW 5th lower horizontal spindle: 7.5 kW Continuously adjustable feed rate up to 24 m/min Ljdpfx Aewft Ufeb Aohn 3 kW feed motor Electronic height adjustment Electronic adjustment of the left head Feed on cardan shafts Five upper steel rollers Two upper rubber rollers One roller in the table top feed Pneumatic material pressure Minimum material length: 400 mm mm Chrome tables Chamber diameter 5 x 125 mm Machine dimensions L x W x H = 370 cm x 200 cm x 190 cm Weight 3500 kg CE marking

Condition: used, Year of construction: 2005, operating hours: 82,000 h, functionality: fully functional, clamping force: 2,000 kN, screw diameter: 55 mm, mold height (min.): 350 mm, total length: 5,320 mm, total width: 1,900 mm, total height: 2,240 mm, overall weight: 10,530 kg, Technical Specifications : Type : 200- 1000 C2 Year of construction : 2005 Clamping force : 2000 kN Size of mould platens (h x v) : 915 x 915 mm Distance between tie bars (h x v) : 560 x 560 mm Mould opening stroke : 700 mm Mould height min.: 350 mm Max. daylight : 1050 mm Hydraulic ejector - stroke : 200 mm Screw diameter : 55 mm Ljdpfoz I Tf Rex Ab Ajhn Injection pressure : 1904 bar Stroke volume : 523 cm³ Dimensions: 5.32 x 1.90 x 2.24 m Total machine weight : 10.530 kg Max. mould weight : 2535 kg A second identical machine is also available. A special package price is offered to buyers interested in both units. Please contact us for details.

Condition: excellent (used), Huron SXB 523 CNC Bed Milling Machine Heidenhain CNC control Year 1991 Lhjdpfsz Hdvksx Ab Ajn Table 110" / 2794mm x 24" / 609 7,716lbs / 3499kgs max table load 78.7" / 1998mm X travel 59" / 1498mm Y travel 33.5" / 850mm Z travel 30-3000RPM spindle 30 ATC 3 Axis

Condition: excellent (used), Year of construction: 2019, LANGZAUNER LZ 5-2 3050 Veneer saw-milling machine, manufactured in 2019. Veneer saw with sawing and milling unit, as well as manual feed, from a carpentry workshop. Very good used condition. Inspection while the machine is powered on is possible by appointment. Machine location: 6845 Hohenems, Vorarlberg, Austria. Collection possible from December 15, 2026. Earlier collection only possible upon agreement. Dismantling, loading, and transport to be arranged. Price on request. Lhjdpfxe Advi Do Ab Aen

Condition: used, Year of construction: 2018, Operational condition machine. Available end of March. Ask for a quotation! Lhodpfsyuv Hhjx Ab Ajn

Condition: used, Year of construction: 2015, Machine operational. Located in EU. For further specification, please request. Lhedjx Sr U Depfx Ab Ajn

Condition: used, Year of construction: 2017, functionality: fully functional, machine/vehicle number: M205M410, working width: 230 mm, planing height: 160 mm, planing width: 230 mm, working height: 160 mm, overall weight: 3,800 kg, workpiece height (max.): 160 mm, type of input current: three-phase, workpiece width (max.): 230 mm, input voltage: 400 V, number of spindles: 5, input frequency: 50 Hz, For sale is a professional four-sided planer WINTER TIMBERMAX 5-23. The machine was only used sporadically for our own production and was not operated in continuous multi-shift operation. Technical data: - Manufacturer: WINTER Holztechnik GmbH - Model: TIMBERMAX 5-23 - Year of manufacture: 2017 - Serial number: M205M410 - 5 spindles - Processing range: 20–230 x 8–160 mm - Feed rate: 6–36 m/min - Supply voltage: 400 V - Frequency: 50 Hz - 3-phase - Maximum power: 37.43 kW - Weight: approx. 3,800 kg - CE marking - Also suitable for processing damp wood Ledpfjz Rpd Asx Ab Aehn The machine is fully functional. The machine is located in Poland, 64-920 Piła. An inspection and demonstration of the machine is possible by prior appointment. Further photos, technical documentation and a video of the machine in operation can be provided upon request.

Condition: good (used), Year of construction: 2000, Leadermac LMC 523 Smartmac four side planer - year of production 2000 - DTR - electronic height and width adjustment - possibility to save permanent parameters TECHNICAL PARAMETERS: - planing width 230 mm - planing height 140 mm - diameter of the spindles 40 mm 1 lower spindle 7.5 kW 2 right spindle 5.5 kW 3 left spindle, 5.5 kW 4 upper spindle 7.5 kW 5 lower spindle 7.5 kW smoothly adjustable feed 3 kW feed motor power Lsdpfxsifftxe Ab Aohn electronic height adjustment electronic adjustment of the left head feed on cardan shafts five top steel pull rollers two upper rubber pulling rollers one role in the table top pulling pneumatic material pressure minimum material length 400 mm length of the preliminary table 2000 mm chrome tables stub diameter 5 x 125 mm Machine dimensions 370 x 200 x 190 cm weight ~ 3000 kg

Condition: used, Leadermac 523 U max. planing width 23 cm - max. planing height 13 cm - bottom 5.5 kW, right and left from one motor 7.5 kW, top 7.5 kW universal 7.5 kW - 2 traction rollers in the table, 7 from above - Spindles can be adjusted vertically and horizontally - Infinitely variable adjustment of the feed speed - Central lubrication, pump with material slip fluid Lsdpfx Asqwg H Deb Aohn

Year of construction: 1997, condition: ready for operation (used), A Dr. Fritsch segment soldering machine for the automatic soldering of segments (typically diamond segments) onto carrier tools is available. An on-site inspection is possible. Ljdpex Ecuxofx Ab Ajhn

Condition: as good as new (ex-display), Year of construction: 2021, functionality: fully functional, machine/vehicle number: 2105025, type of input current: three-phase, input voltage: 380 V, input frequency: 50 Hz, input current: 72 A, Four-sided planer Leadermac Compact LMC-523C with 5 spindles, manufactured in 2021. Working width 15 - 230 mm, working thickness 10 - 150 mm, minimum piece length 800 mm (300 mm for sequential feed). Spindles: 3 x 7.5 HP and 2 x 10 HP, spindle speed 6,000 rpm, spindle diameter 40 mm. Feed motor 5 HP with inverter, feed speed 6 - 24 m/min. Fully enclosed machine with sound insulation, chrome-plated feed table, pneumatic pressure rollers with 3 adjustment positions, and a solid cast iron frame. Connection 380 V / 50 Hz, CE version. Options: infeed table 2.5 m (instead of 2 m), pneumatic side pressure roller on the left spindle, split pressure roller at the top, additional tables for multiple sawing on the 2nd bottom spindle, anti-kickback device, and Schneider Easyset touchscreen (1 x conventional and 2 x NC). Ljdpfxsz Ngitj Ab Ajhn

Condition: excellent (used), The machine is in very good condition and has 4.1 million operating hours recorded. The following options are included: PF 711 / IQ 501 / IC 604 / RU 518 / FS 523 / SD 513 / SD 513F / FD 504 / TU 503 / FD 503. Lodj Aazf Aopfx Ab Ajhn

Condition: excellent (used), Year of construction: 2012, TruBend 5230 including robot, well-maintained, in excellent condition. Lhjdpfxoz Uxk Hj Ab Asn

Condition: good (used), functionality: fully functional, Year of construction: 2015, bending force (max.): 230 t, Bending length [mm] 3230 Press force [tons] 230 Control system TRUMPF TASC 6000 Standard equipment: Machine - Robust machine frame in all-steel construction - Press beam, stress-relieved by annealing - Spherical mounting of the press beam with inclination - Electro-hydraulic upper drive with 4-cylinder technology - Generous bending clearance - Flat front covers - Modern block hydraulics - Electronic pressure gauge - Measuring system with glass scale and spring compensation - Hydraulic oil in the machine (lifetime lubrication) - Oil cooler - Control cabinet cooling via air-to-air heat exchanger - Modern machine design Back gauge system - Rear back gauge system, 2 axes, X and R axes - 2 back gauge fingers with secure adjustment from the front Tool clamping - Upper tool holder, manual clamping, hardened - Lower tool holder, hydraulic clamping, hardened - Lower tool displacement, 2 positions, pneumatic Crowning - Manual crowning Control system - TRUMPF TASC 6000 Lsdpfoz Rl Nhox Ab Aehn - Graphical workshop programming - Windows XPe (embedded), Pentium 4 with 2.8 GHz clock frequency - 2 GB RAM - 15-inch touch screen - Network capable - Teleservice via modem Operation - Control panel with LCD keypad and foot switch - Communication bus Safety - Standard safety devices

Condition: used, Padelttherm HGU 9408/800 Hearth Car Circulation Furnace For sale is a professional Padelttherm heat treatment system / hearth car circulation furnace, type HGU 9408/800. The system was used for the heat treatment of aluminum housings and is designed as a gas-fired hearth car furnace with circulation. Two chain conveyors are also part of the documented complete system. Technical data Manufacturer: Padelttherm GmbH Type: HGU 9408/800 Year of manufacture: 2019 Design: Hearth car circulation furnace / heat treatment system Material to be treated: Aluminum housings Temperature / heating capacity - Max. permissible furnace chamber temperature: 800 °C - Operating temperature: 680 °C - Heating time from 20 °C to 680 °C: approx. 5–5.75 hours - Max. total load weight: 4,900 kg - Heating medium: Liquefied petroleum gas (LPG) - Lower heating value: 25.89 kWh/m³ - Gas inlet pressure / flow pressure: 100 mbar - Connected load: 523 kW - Natural gas flow rate: 20.2 m³/h - Combustion air: 560 m³/h at 80–100 mbar Burners / Circulation - 4 burners, each with 130 kW - 2 of these with pilot burners - Burner type: Cold air burner - Automatic ignition - Ionization flame monitoring - Individual burner control - 2 burners per circulator - 2 hot gas circulation fans Control technology - 2 control zones, front / rear - Electrical connection: 400 / 230 V, 50 Hz - Total electrical connected load: 21 kW - Hot gas circulator: 2 × 4.0 kW - Combustion blower: 7.5 kW - Lift door drive: 1.5 kW - Hearth car drive: 1.5 kW - Controller: JUMO DiconTouch - Control behavior: PID - 10 programs - Display / operation: DiconTouch - Temperature safety limiter: 2 × JUMO safetyM STB/STW - Thermocouples: NiCr-Ni, Type K, Class 1 Usable space - Usable volume: 9.41 m³ - Usable width: 1,500 mm - Usable depth: 4,200 mm - Usable height: 1,300 mm - Clear dimensions: 1,600 × 4,300 × 1,400 mm Furnace dimensions - Width: 2,900 mm - Depth: 5,200 mm - Height: 3,330 mm - Weight: approx. 13,000 kg Overall dimensions of the system: - Width: 3,270 mm - Depth incl. track: 10,165 mm - Height incl. door portal: 4,355 mm Hearth car: - Width: 1,870 mm - Depth: 4,570 mm - Height: 780 mm Chain conveyor KF1400x120x80 - W × D × H: 1,785 × 14,680 × 1,850 mm - Weight: approx. 7,900 kg KF700x120x80 - W × D × H: 1,775 × 7,280 × 880 mm Ledpfxoz Hvzro Ab Ajhn - Weight: approx. 1,650 kg "Everything from a single source: We would be happy to offer you a suitable bank financing for your project." You can find more items - new and used - in our shop! International shipping costs on request!

Condition: excellent (used), Year of construction: 2021, We offer the ETL Prüftechnik ATS 400 X8 automatic test system, designed for electrical and safety testing of products in industrial and laboratory environments. The device is used for, among others: • Quality control (QC) • End-of-line production testing • OEM laboratories and testing stations ⸻ Basic data • Model: ATS 400 X8 • Power supply: 230 V / 50–60 Hz / max. 10 A • Year of manufacture: 03/2021 • Manufacturer: ETL Prüftechnik GmbH (Germany) • Condition: very good, well-maintained equipment • Last factory calibration by ETL: 05/2023 • Weight: 38 kg ⸻ Equipment / Included in delivery • Main ATS 400 X8 unit with integrated touchscreen display • Windows 10 Pro operating system (OEM) • Complete set of test leads and accessories (as shown in the photos) • Manufacturer’s documentation • Original markings, nameplates, CE certification ⸻ Technical notes Lhodez Sll Hspfx Ab Aon • This is a professional test and measurement instrument, not consumer electronics • The equipment is ready for use in a production environment • No signs of tampering; all connectors and interfaces are complete

Year of construction: 2010, condition: ready for operation (used), functionality: fully functional, We have two units in stock. Price is for one unit only. Carry out high-volume culturing with a high-level of contamination control with these stackable Thermo Scientific Forma Steri-Cult CO2 Incubators. This incubator combines the most advanced components available into a single incubator: CO2 sensor, precise microprocessor controls, active humidity control, HEPA air filtration and high-temperature decontamination capability. Ledpfx Ae Aaw Rbsb Ashn Integral 140°C high-temperature sterilization function, 14 hr duration. Optimized airflow system will not interfere with samples or incubator function. In-chamber HEPA air filtration continuously removes particulates for Class 100 quality conditions. On-demand 140°C sterilization cycle eliminates contamination from internal surfaces. Audible alarm activates if outer door is opened during the cycle or if temperature reaches 60°C or greater. Access code prevents accidental initiation of the cycle. Alphanumeric messaging center clearly displays temperature, CO2 and RH. Audible/visual alarms with silence button. Setpoints for temperature, overtemperature, CO2 and RH. Configurable audible ON/OFF, access code, HEPA filter change reminder, remote alarm contacts, tracking low temp and high and low CO2 and RH alarms. Temperature Range: Ambient +5°C to 50°C Relative Humidity: 95%, controllable Humidity Source: External humidity reservoir CO2 Concentration Range: 0 to 20% CO2 Sensor Technology: IR Sensor Capacity: 322.8 L Chamber Material: Polished Stainless Steel Interior Dimensions (DxWxH): 523 x 732 x 838 mm Dimensions (DxWxH): 686 x 1092 x 1002 mm Good working condition. Please check out our other listings as well.

Condition: excellent (used), functionality: fully functional, Year of construction: 2010, operating hours: 35,295 h, bending force (max.): 230 t, Equipment: CE marking, documentation/manual, safety light barrier, Bending length [mm] 3230 Press force [tons] 230 Control system TRUMPF TASC 6000 Standard equipment: Machine - Robust machine frame as a welded construction in all-steel design - Press beam with high bending strength - Spherical bearing of the press beam with press beam inclination - Proportional valve technology and switchable double pump - Modern block hydraulics with control valves mounted on the cylinder - Electronic pressure gauge - Measuring system with centrally mounted glass scales and temperature compensation - Oil cooler Ledpfez Rmabsx Ab Aehn - Control cabinet cooling - Modern machine design Back gauge system - Rear back gauge system, 2-axis, with rack and pinion drive for X and R axis - 2 back gauge fingers with secure adjustment from the front Tool clamping - Upper tool clamping system "New Standard Clamping", manual, hardened, self-centering; for vertical tool change - Lower tool holder with hydraulic clamping, hardened Lower tool movement - Lower tool movement programmable (pneumatic, 2 positions) Control - Machine control: TRUMPF TASC 6000, graphical - Workshop programming - Windows XPe, Pentium 4 with 2.8 GHz clock frequency - 2 GB RAM - 15" touch screen - Network-enabled - Teleservice via analog telephone connection Operation - Control panel with LCD keypad, foot switch for up, down and emergency stop - Communication bus for the use of ACB angle sensor tools Safety - Safety device: integrated side doors + Rear back gauge system, 5-axis (X, X1, R, Z1, Z2) + Upper tool clamping, hydraulic + CNC crowning + BendGuard + Additional foot switch + 2 support consoles + 1 MobileControl + ACB prepared

Condition: excellent (used), Year of construction: 2018, operating hours: 9,585 h, functionality: fully functional, clamping force: 1,600 kN, screw diameter: 55 mm, displacement volume: 523 cm³, plate length: 660 mm, plate height: 710 mm, total length: 6,700 mm, total width: 1,600 mm, total height: 1,600 mm, overall weight: 10,900 kg, KRAUSS MAFFEI KM 160-1000 PX Stock No.: 503156 Manufacturer: KRAUSS MAFFEI Type: KM 160-1000 PX Control System: MC6 Year of Manufacture: 2018 Operating Hours: 9585 h Technical Data – Clamping Unit Clamping Force: 1600 kN Tie Bar Spacing h x v: 520 x 470 mm Platen Size h x v: 710 x 660 mm Minimum Mold Height: 200 mm Maximum Mold Height: 600 mm Opening Stroke: 1050 mm Ejector Stroke: 150 mm Ejector Force: 33 kN Centering of Moving Platen D: 120 mm Centering of Fixed Platen D: 160 mm Lhedsz A D Raspfx Ab Ajn Technical Data – Injection Unit Screw Diameter: 55 mm Injection Volume: 523 ccm Injection Pressure: 1904 bar Screw Length: 20 l/d Screw Speed: 243 min Screw Torque: 827 N Plasticizing Rate: 43 g/s PS Free Injection Rate: 297 g/s PS Number of Heating Zones: 6 Dimensions & Weight Machine Dimensions L x W x H: 6.7m x 1.6m x 2.3m Total Weight: 10900 KG Equipment Screen text in German CEE socket 16A CEE socket 32A Pressure accumulator for increased injection performance 3 freely programmable inputs and outputs each Core pull pneumatic 2 x Machine with water manifold Machine without material hopper Leveling elements Interface for color dosing device Interface for temperature control unit USB interface Schuko socket 10A Low-wear plasticizing unit Tool heating 24x

Condition: refurbished (used), Year of construction: 2011, operating hours: 10 h, functionality: fully functional, travel distance X-axis: 6,096 mm, travel distance Y-axis: 2,032 mm, travel distance Z-axis: 200 mm, table length: 8,559 mm, table width: 3,861 mm, warranty duration: 12 months, feed length Z-axis: 200 mm, water pressure: 4,500 bar, cutting length (max.): 6,096 mm, cutting width (max.): 2,032 mm, OMAX Waterjet 80X-1 Features: - Omax PC-Based CNC Control - 50 HP Enduromax 5060V Pump - Closed-Loop Water Recycling System - Terrain Follower (Collision Sensing Follower) - Abrasive Removal System - Dosing System Machine Dimensions: Water tank dimensions: 8000 x 3300 mm 2x Sand cart dimensions: 1500 x 1000 mm Pump dimensions: 1700 x 1300 mm Hopper dimensions: 900 x 900 mm Height ranges between 1000 mm and 1500 mm Fully Refurbished High-Pressure System – Professional Technical Overhaul The machine offered for sale has undergone a comprehensive technical refurbishment, including a complete overhaul of the high-pressure pump and all critical high-pressure system components. All works were performed by a professional service team, focusing on restoring full performance, reliability, and long-term operational stability. 💦 High-Pressure Pump – Complete Overhaul The high-pressure pump has been: - Fully disassembled - All worn and critical components replaced or refurbished - Sealing elements, valves, and pressure-critical parts completely renewed - Operating parameters recalibrated to factory specifications As a result, the pump now provides stable operating pressure, quiet performance, and extended service life. ⚙️ High-Pressure Components All high-pressure system components operating in conjunction with the pump have been: - Thoroughly inspected - Replaced or overhauled where necessary - Pressure-tested to ensure safe, efficient, and reliable operation The machine is fully prepared for continuous industrial operation. ✅ Overall Condition Thanks to the extensive refurbishment, this machine is: - Technically fully renewed - Equipped with a completely refurbished high-pressure system - Ready for immediate operation It is an ideal solution for customers seeking a high-performance waterjet machine without the expense of new equipment, while maintaining professional reliability and precision. Ready for Shipping Lodsyaiitjpfx Ab Ajhn

Condition: excellent (used), For sale is a Karl Süss HR 100 Analyse – a high-end, manual measurement and testing station designed for the analysis and contacting of semiconductor wafers and microelectronic components. The device is used in laboratories, research and development departments, and during scientific research. The station is equipped with a precise measurement table with fine adjustment, a sample holder with a vacuum function, and a mechanical lifting mechanism. It also has connections for compressed air and vacuum, which ensures stable mounting of the components being tested during measurements. Technical data: Manufacturer: Karl Süss Model: HR 100 Analyse Device type: manual testing station (Wafer Probe Station) Ledpfx Aboz Sndxs Ajhn Application: analysis and testing of semiconductor wafers and microelectronic components Vacuum function for sample mounting Precise measurement table Connections for compressed air and vacuum Condition: used, as shown in the pictures.