Used Test Bench For Gears for sale (22,015)

Condition: used, Kübrich   Kübrich Test Systems 48V Belt Starter Generator - Component Test Bench   Details of the test bench: (See Figure 13) Frame with (1) Mounting device for a belt starter generator (2) Load machine (3) Belt (4) MP1: Control cabinet (5) MP3: Control cabinet for control, interface panel with main switch, I/O (6) MP2: Control cabinet with Simotion (7) MP4: Control cabinet with DC-DC converter (8) H3: Measuring technology box (9) H4: Interface box   Intended use: The test bench is used for carrying out tests on belt starter generators during development.   Technical data: Electrical connection data Hsdpfozhkb Sox Ag Eefn Power supply: 400 V / 32 A Battery simulation: 0 - 60 V Current: 0 - 250 A (continuous) Current: 330 A (short-term, less than 1 s) Control voltage 24 V   Mechanical performance data according to the data sheet of the load machine A gear ratio of 1:2 to the test specimen shaft must be considered. Speeds: Load machine: Manual operation: 0 - 50 rpm Automatic operation: min Test specimen motor: Manual operation: 0 - 0 rpm Automatic operation: 0 - rpm   Dimensions and weight Width: 850 mm Height: 1386 mm Length: 1687 mm   Weight: approx. 1.2 t   Condition: used   Scope of delivery: (See Figure)   (Changes and errors in the technical data are subject to change!)   We will be happy to answer any further questions you may have by telephone.

Condition: used, Year of construction: 2018, Nominal power in kilowatts 7,7 MW Maximum power 8,47 MW Nominal turning speed 1150 1/min Maximum turning speed 2200 1/min Nominal torque 63940 Nm Hfsdpsrr Ammefx Ag Ejn Maximum torque 70330 Nm 8 MW test bench for gears, closed loop

Condition: used, BAT Shaker Fixture Cube Magnesium Shaker Fixture Cube 400 × 400 × 400 mm Professional fixture cube for vibration test benches, environmental testing technology, vibration tests, and testing laboratories. For sale is a used Shaker Fixture Cube made of magnesium. The fixture cube is suitable for the flexible mounting of test specimens, measuring setups, and fixtures on vibration test benches. The robust magnesium construction offers high rigidity while maintaining a low weight and is used in testing and development laboratories. Technical data: Manufacturer: BAT Material: Magnesium Type: Shaker Fixture Cube External dimensions: approx. 400 × 400 × 400 mm Threaded grid on all sides Several large through-holes for mounting Robust, precision design Equipment: Magnesium construction Precision-machined mounting surfaces Threaded holes on all sides Large corner holes for mounting Suitable for individual test setups Accessories as shown in the pictures Application areas: Vibration test benches Vibration testing Environmental testing technology Automotive Aerospace Research and development Testing laboratories Industry Scope of delivery: Magnesium Shaker Fixture Cube Accessories as shown in the pictures Condition: Used Visual condition as shown in the pictures. Normal signs of wear and tear due to age. The table shown in the photos and any other items not explicitly mentioned are not part of the sale. Shipping via parcel service is possible. Hsdpfx Aezkhxteg Eefn Subject to changes, errors and prior sale. We will be happy to answer any further questions by telephone.

Condition: excellent (used), For sale is a professional measurement station, the Wentworth Laboratories MP-0900, designed for testing and performing measurements on semiconductor components, circuit boards, and microelectronics. The device is equipped with a Wild Heerbrugg Epizoom 1:5 stereoscopic microscope with smooth magnification adjustment and a precise, movable measuring table. The design also features color-coded measurement ports. Data from the nameplate: Manufacturer: Wentworth Laboratories, Inc. Model: MP-0900 Serial number: 123A Power supply: 230 V Frequency: 50 Hz Hfsdpfx Agoz Snr Io Ejn Weight: approximately 34.6 kg Wild Heerbrugg microscope – manufactured in Switzerland Used condition, with normal signs of wear visible in the photos.

Condition: used, SincoTec Type: POWER FLOW 100kN / 2000Nm Sincotec Power Flow 100 kN / 2000 Nm – Servohydraulic testing machine – fully functional Description: For sale is a servohydraulic testing machine, Sincotec Power Flow, from an industrial operation. The system is ideally suited for dynamic and static testing of components and assemblies, e.g. in the automotive, mechanical engineering or research field. Technical highlights: Max. testing force: 100 kN (up to ±150 kN) Max. torque: ±2000 Nm (up to ±4000 Nm) Linear stroke: ±50 mm (max. ±75 mm) Max. swivel angle: ±50° Servohydraulic control Control via Sincotec TestPilot / CoPilot software Includes large hydraulic power unit Dimensions & testing machine Testing table: approx. 1.20 × 1.00 × 1.20 m (H) Overall height of testing machine: approx. 3.30 m Hydraulic power unit (separate) Height: 2085 mm Length: 2714 mm Width: 1820 mm Fully functional before disassembly Hedjzimb Djpfx Ag Eofn Power supply / electrical (from nameplates) Individual units / motors 230 V / 50 Hz Leak oil pump: 0.18 kW / 1.5 A 400 V / 50 Hz (three-phase) Crossbeam: 0.25 kW / 0.79 A Total weight: approx. 3000 kg Important note: "The table shown in the photos is not included in the sale." Condition: used Scope of supply: (See picture) (Changes and errors in the technical data are subject to change!) We would be happy to answer any further questions you may have by phone.

Condition: used, EDAG EDAG Huf Endurance Testing Stand Intended use: This testing stand is intended exclusively for testing components that are capable of rotational and/or translational movement within the scope of an endurance test and within the limits of the following technical specifications. Technical data: Dimensions: Width 1565 mm x Depth 615 mm x Height 1655 mm Weight approx. 450 kg Operating voltage 400V / 50Hz Control voltage 5, 24 Preliminary fuse 16 A Hodpfxozh U Rds Ag Ejfn Testing device: Maximum stroke 194 mm Maximum axial force 500 N Maximum torque 5 Nm Breakaway force (manually operated slide) 15 N Sliding force (manually operated slide) 10 N Other equipment: Ρ4, 24" TFT monitor (1900 x 1080) Operating system Windows XP Measurement and control software LabVIEW 2011 PC plug-in cards: 1 card, NI PCI-6251, 1 card, N1 PCI-7044 Drawer 500 mm (full extension with automatic closing) Additional load 500 N Drawer cabinet, lockable, 3 drawers The teach-in endurance testing stand is a device for carrying out endurance tests on test objects that can rotate and/or move translationally, e.g., cylinder locks, door handles, key functions. Condition: used Scope of delivery: (See image) (Changes and errors in the technical data and specifications are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: used, Year of construction: 2025, machine/vehicle number: 211-11-07-25-10, total width: 1,070 mm, total length: 2,500 mm, total height: 2,050 mm, This E-bike motor test bench, type G5, manufactured in 2025 by EMEC Prototyping GmbH, will be auctioned off in our online auction "Closure of a well-known German manufacturer of e-bike drives: warehouse, production, and office equipment, test stations, bicycles, tools, and accessories." Further details: E-bike motor test bench EMEC G5, manufactured in 2025 Test bench for e-bike drives with two test levels (Rack 1 and Rack 2) in an aluminum profile enclosure with safety doors, including an attached control cabinet. According to the nameplate: Manufacturer: EMEC Prototyping GmbH Type: Motor test bench G5 Year of manufacture: 2025 Electrical power: max. 16.6 kW Electrical connection: 3Ph~ 400 V / 32 A Dimensions (L x W x H): 2500 x 1070 x 2050 mm Weight: 1150 kg, permissible total weight: 1300 kg Hedpfx Aoz Nd N Dog Eofn As far as can be seen, the following components are installed (information without guarantee): Both test levels appear to be equipped identically, per level: Beckhoff servo motor AM8064-0R1A-0000 (11.5 kW, 49.7 Nm, 3000 rpm) with gearbox and Beckhoff Air Cooling Kit AX2090 Beckhoff servo motor AM8053-0J1A-0000 (3.12 kW, 15.4 Nm, 2000 rpm) with gearbox and fan unit 2 torque measuring shafts Test specimen mount with protective bracket on a slide Linear guides with clamping levers for axial adjustment Fan for test specimen cooling Thermocouple connections (Type K) Connections for CAN, service, fan, and auxiliary voltage (AUX) Additionally: Laboratory power supply EA PS 10080-120 (0 to 80 V, 0 to 120 A) Control cabinet (as far as can be seen): Emergency stop, main switch, on/off button, CAN connection per rack, front connections 2x USB, DisplayPort, and RJ45 Forklift pockets, rollers, and adjustable feet All information without guarantee. The technical specifications were determined based on nameplates and visual inspection. The actual condition as inspected is the decisive factor. Functionality has not been tested. Software and operating computer are not part of the lot unless expressly stated.

Year of construction: 2024, condition: like new (used), functionality: fully functional, (Please tell us your offer price) Sale only within Europe, incl. Turkey Price without packaging; delivery condition: FCA (machine location) ===== Technical data see handout. Hfjdpfxez Hax Uj Ag Eon All warranty rights are excluded. For the correctness of the technical data and year of construction, for the completeness of accessories and tool equipment, and for compliance with all safety and environmental protection requirements specified in the accident prevention regulations. No sale to private individuals. Sales only within Europe, incl. Turkey Price without packaging; Delivery condition: FCA (machine location) ===== Technical data please see handout in attachment. German text leading language. Without any guaranty and warranty, including completeness of tools & accessories as well as environmental and safety regulations. No private sales.

Condition: used, Year of construction: 2024, machine/vehicle number: 211-11-01-23-02, total width: 1,070 mm, total length: 2,470 mm, total height: 1,850 mm, This E-bike motor test bench, type G4, manufactured in 2024 by EMEC Prototyping GmbH, will be auctioned off in our online auction "Closure of a well-known German manufacturer of e-bike drives: warehouse, production, and office equipment, test stations, bicycles, tools, accessories." Further details: E-bike motor test bench EMEC G4, manufactured in 2024 Test bench for e-bike drives with two test levels in an aluminum profile enclosure with safety doors, including a mounted control cabinet and temperature control unit. According to the nameplate: Manufacturer: EMEC Prototyping GmbH Type: Motor test bench G4 Year of manufacture: 2024 Electrical power: max. 16.6 kW Connection power: 3Ph~ 400 V / 32 A Dimensions (L x W x H): 2470 x 1070 x 1850 mm Weight: 1200 kg, permissible total weight: 1350 kg As far as can be seen (information without guarantee): Both test levels appear to be constructed identically, per level: Beckhoff servo motor AM8064-0R1A-0000 (11.5 kW, 49.7 Nm, 3000 rpm) with gearbox and Beckhoff air cooling kit Second servo motor with gearbox and fan unit, design presumably Beckhoff AM8053 (nameplate not visible) 2 torque measuring shafts Test specimen mounting with ring holder on a carriage Hfodpfxez Ngzcs Ag Eon Linear guides with clamping levers for axial adjustment Heat exchanger behind the test specimen mounting Fan for test specimen cooling Connections for CAN, service, and auxiliary voltage (AUX) Additionally: Julabo 1200F refrigeration circulator with touch control unit Laboratory power supply EA-PS 9080-100 Control cabinet (as far as can be seen): Emergency stop, main switch, on/off button, front connections USB and RJ45, control cabinet fan Rollers and adjustable feet All information without guarantee. The technical specifications were determined based on nameplates and visual inspection. The actual condition, as inspected, is decisive. Functionality not tested.

Year of construction: 2023, condition: excellent (used), machine/vehicle number: 0293, We are selling the test bench from the aircraft manufacturing sector. Hsdpfx Aoyl S Euog Eofn

Condition: used, KSE KSE Leakage Testing System Testing system for automotive applications Testing of electric drives Insulation/leakage testing of electric motors Supply voltage: 400 VAC Control voltage: 24 VDC Hodpfx Aozdzilog Eofn Connected load: 0.75 kW Condition: used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We would be happy to answer any further questions you may have over the phone.

Condition: used, Year of construction: 2023, machine/vehicle number: SE_00650, This RIDE60 type electric motor test stand, manufactured by FAZUA (custom-built), is for the RIDE60 electric drive series and was manufactured in 2023. It will be auctioned off in our online auction entitled "Closure of a well-known German manufacturer of e-bike drives: warehouse, production, and office equipment, test stations, bicycles, tools, accessories." Further details: Manufacturer: FAZUA (custom-built) Type: End-of-line test stand Year of manufacture: 2023 (according to the nameplate of one station) Condition: used, functionality not checked Quantity: 3 identical stations available (auctioned separately) Location: 85521 Ottobrunn near Munich Test stand for final inspection of e-bike drive units from series production. The drive unit is tested and calibrated under load; power and torque are measured, among other parameters. Complete with control computer and label printer. Technical data (information without guarantee) Test track with servo motor, 2 pneumatic brakes, and torque sensor Metal bellows couplings Mount for the drive unit with quick-release mechanism Safety enclosure made of aluminum profile with transparent flaps Base cabinet with 3 doors Control panel with emergency stop, main switch, start button, indicator lights, and 2 manometers Panel PC 15.6" Label printer Zebra ZT231 Hand scanner (not on all stations) Hfedpez Ng Ayjfx Ag Esn Operating voltage 230 V / 16 A / 50 Hz (according to the nameplate of one station) Compressed air connection required (6.5 bar) Dimensions approx. 1,800 x 600 x 1,400 mm Sale Sale via online auction on RESTLOS.com. Bidding ends on 19.10.2026. Viewing: [16.10.2026; 9:30 a.m. to 12:00 p.m. – booking via our RESTLOS auction platform] All information without guarantee. Functionality not checked. Test software is not included in the offer unless expressly stated.

Condition: excellent (used), functionality: fully functional, Universal testing machine for material testing / material analysis Testing of tensile strength, bond tensile strength, and shear strength of masonry and wood connections, etc. - Nail pull-out test - Compression test on cement and mortar prisms - Bending test on cement and mortar specimens - Compaction test - Bending test on wood and concrete - Shear strength test on wood - Splitting test on wood - Scaffolding connection test - Shear strength test on walls - Tensile test on walls - Tensile test on structural steel - Tensile test on wood - Pull-out test on structural steel - Reversal bending test on structural steel - Anchor pull-out test - Bond tensile test Hfedpfx Agoxmv H Ro Ejn I have made a video demonstrating the function of the testing machine. I can send this video to a mobile number via WhatsApp or Signal! Shipping and loading are possible at my warehouse!

Condition: not inspected (used), Hydraulic test station, manufacturer: Hydac, with 1 measuring device, oil filter, hydraulic power unit, mounted on 1 multi-level transport trolley. Hsdpfx Agez R Ntfo Eofn

Condition: used, Year of construction: 2023, functionality: unexamined, machine/vehicle number: 7001922, input voltage: 400 V, Equipped with 4 M-20iD/12L Fanuc robots. Installation dimensions: 16,000 x 4,000 x 3,400 mm. Hjdey T Ulzepfx Ag Ejfn

Year of construction: 1999, condition: good (used), The machine has been produced in the late 1990's. Very little usage (it has been stored in a warehouse). Located in Tata, Hungary. No warranty. Hfsdpfx Agetw S Awj Eon 1800 bar Cr pump with injector Test bench with 15 kW power, 12 measuring points, flow-through water cooling KMA flow meter system with 2 flow meters. The bench has a separate lubricating oil pump with lubricating oil supply Speed range from 0 to 4000 f/min. Equipment: - Bosch Cr pump control test in safety, protective cage - Bosch magnet coil injector testing, coding - optional testing of piezo injectors - option to repair and test CP2 pumps Testing and coding is performed using Bosch factory software and database. Bosch Esi subscription required The test bench is in good condition and has been operated with regular calibration. For sale due to site closure.

Condition: used, Year of construction: 2001, max. wheel diameter 400/500 mm CNC-Control GE FANUC Series 160i-M pinion diameter - max. 400 mm crown gear diamter max. 500 mm x-axis +/- 70 mm y-axis 200 mm Hfodpfsvxwxcex Ag Een z-axis 200 mm axis angle 90 Grad speeds: R T min rated current 30 kVA weight of the machine ca. 6,2 t dimensions of the machine ca. 3,2 x 2,5 x 2,3 m

Condition: good (used), workpiece diameter between centers: 2,286 mm, The No. 61 Angular Hypoid Tester is designed to test large bevel and hypoid gears up to 90" diameter and with shaft angles from 0 - 135 degrees. Spur, helical and internal gears can also be accommodated. The drive or pinion spindle can be rotated in either direction at a recommended spindle speed of 600 RPM. It is mounted in a head which is vertically adjustable on a column, so that the spindle can be offset either above or below the center line of the gear spindle for testing hypoid gears. The pinion head column is adjustable angularly in a horizontal plane to permit testing of gears of any shaft angle from 0 - 135 degrees. Specifications: Centerline of Drive Spindle to Nose of Brake Spindle (90 degrees shaft angle and without face plate): 38-1/2" Max. / 7-5/8" Min. Centerline of Brake Spindle to Nose of Drive Spindle (90 degrees shaft angle and without face plate): 60" Max. / 10" Min. Centerline of Brake Spindle to Nose of Drive Spindle (90 degrees shaft angle and with 54" face plate): 60" Max. / 28" Min. Centerline of Brake Spindle to Centerline of Drive Spindle (For Spur Gears): 56" Max. / 6" Min. Distance Between Nose of Brake Spindle and Nose of Drive Spindle (for spur gears): 36-1/2" Max. / 0" Min. Offset of Drive Spindle Either Above or Below Centerline of Brake Spindle: 10" Range of Shaft Angles: 0 - 360 Degrees Maximum Diameter of Gear: 90" Diameter of Face Plate: 54" Outboard Bearing: 3" Diameter Hole Spindles: RPM of Drive Spindle Pulley Set No. 1: 100 - 400 RPM of Drive Spindle Pulley Set No. 2: 250 - 600 Diameter of Taper Hole (large end): 6" Taper Per Foot: 3/4" Depth of Taper: 8" Hole Through Spindle: 5-1/2" Hfsdpfertrzdox Ag Ejn Net Weight of Machine: 20,000# Net Weight of Machine W/Outboard Support and Bed Plate: 24,000#

Condition: good (used), Conveyor belt for scraps from guillotine M-Fordersysteme Production Germany Year of manufacture 2015. Working width 46 cm, conveyor length approx. 250 cm. Hsdpez N Sgqjfx Ag Esfn Discharge of trimmings from under the machine directly to the container. Material pressing roller, upper cover preventing spillage of the excavated material.

Condition: excellent (used), Year of construction: 2019, overall weight: 7,400 kg, Equipment: documentation/manual, Surface and contour measuring machine. Model: T8000 Wavemove ZKG. Used for measuring engine blocks. More information available via email. Hfodpfx Agsz Hx Eye Een

Condition: used, Year of construction: 2013, functionality: fully functional, total width: 1,000 mm, total length: 2,500 mm, total height: 1,020 mm, Optical table Hsdpfx Aozrfl Heg Eefn Perforated plate made of stainless steel (11 cm) Frame: 80x82x155 cm (H x W x L)

Condition: used, Year of construction: 2007, max. wheel diameter 400 mm workpiece dia. 36-300/400 mm axis distance 135-290 mm spindle turning speed - stepless 3000 1/min dist. between centers 100-550 mm Control Siemens 840D weight of the machine ca. 4000 kg dimensions of the machine ca. 2000x3055x2788 mm Test method: - Single flank rolling test - Double flank rolling test Hedpfx Agjy D T Sue Esfn - Structure-borne noise test - Heli testing in two-flank contact. Features: - Use of up to 6 test slides - Highest testing accuracy and repeatability - Machine table with workpiece drive - Swiveling pneumatic unit - Spray oil lubrication (type: Vogel) - Oil mist extraction (type: Elbaron)

Condition: used, 10 containers dedicated to hydrogen testing L 6058 x W 2438 x H 2896 mm Ready to be connected to cooling/electrical/H2-N2 systems Cooling capacity: 100 kW Electrical capacity: 40 kW (can be increased to 100 kW) Bench automation software provided (Horiba STARS) Durability testing Characterization testing Hfodezgv Rvjpfx Ag Eon EU declaration of conformity available

Condition: good (used), Year of construction: 1992, weight 5,5 t Table tip diameter: 35 mm Hodszidz Ispfx Ag Eofn Tip height above table: 75 mm Counterholder tip diameter: 50 mm Counterholder tip stroke: 40 mm Minimum center-to-center distance: 20 mm Minimum measuring height above table: 50 mm Maximum measuring height above table: 800 mm Table diameter: 500 mm Base circle diameter: 0–1000 mm Maximum rolling path: ±115 mm Maximum workpiece weight: 2000 kg X-axis: 230 mm Y-axis: 530 mm Z-axis: 750 mm Max. workpiece diameter: 1000 mm Software for new PCs: Windows 11 Bevel gear software, if desired, available only on Metrotek installations Additional information: - Machine calibrated according to DAKKS on November 19, 2017

Condition: used, SincoTec Type: Exciting Mot Resonance test bench POWER SWINGLY 20 kN The POWER SWINGLY BigTable resonance test bench is designed as a dual-mass vibrator. It consists of a vibration head, which is excited via an asynchronous motor with frequency control and an eccentric motor. The vibration head is located in the upper part of the machine and generates the dynamic amplitude. The vibration head is supported on the upper traverse via pre-tensioned coil springs and is guided centrally. The center load drive is located in the lower part of the machine and applies the static preload with the aid of a geared motor via a spindle drive. The test chamber is located above the mounting table and is bounded upwards by the adjustable traverse. The control of the test bench is carried out by the EXCITING MOT control system. The complete control electronics for the control system are housed in an industrial PC cabinet. The control cabinet is made of powder-coated steel sheet and meets protection class IP 50 according to EN 60529. Technical data: General data of the test bench: Overall height of the test bench 1840 to 2240 mm Height of the machine table 1030 mm Width of the test bench 800 mm Depth of the test bench 1500 mm Height of the test chamber max. 600 mm (without force sensor) Free column passage 550 mm Maximum force amplitude 10000 N Maximum total force ±20000 N Maximum stroke ±5 mm Test frequency 30 to 110 Hz Accuracy of the measuring sensors min. class 1 (according to DIN EN 10002-3) Weight of the test bench approx. 1880 kg Max. weight of the clamping device 150 kg General data of the control cabinet: Overall height of the control cabinet 1900 mm Height of the table top 1080 mm Width of the control cabinet 650 mm Depth of the control cabinet 700 mm Weight of the control cabinet 152 kg Color RAI 9006 (white aluminum), table top Midnight Conditions for the installation site: Space requirement 2.5 x 2.5 m Required ceiling height 2.8 m Floor load-bearing capacity 170 N/cm² Voltage supply 400 V / 50 Hz (right-rotating field) Connection plug CEE socket, 5-pole, 16 A Fuse 16 A Connection and environmental conditions Mains conditions: Voltage 400 V three-phase with PE conductor and protective earth, right-rotating field Voltage fluctuations < ± 10% Hjdpfx Aszii Aweg Eofn Short-time voltage dips < 20 ms Limits for permanent interference Radio interference level A according to VDE0871 Frequency 50 Hz ± 1% Protective earth Ground resistance < 0.3 Ω Model: POWER SWINGLY MOT Condition: used Scope of supply: (See picture) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by telephone.