Diesel test bench

Bosch EPS815 / 0683815001

Year of construction: 2020, condition: new, Touch control ROMER cabins are equipped with 4 "color touch displays. Operation of the cabin is intuitive, takes place in 3 modes, automatic (time), automatic (based on a clogged filter sensor), or manual Filter clogging sensor A sensor is installed in the cabins, which queues the filters for cleaning when they become clogged. The system also informs you when the filters have worn out Automatic filter cleaning The electronic system for automatic filter cleaning has a range of cleaning frequency and shot time adjustment. Each of the filters is cleaned separately, the filters can also be cleaned manually using the buttons. We know from experience that it is difficult for the operator to enforce filter cleaning. Thanks to this system, the operator will not have to think about it anymore. Low volume Aluminum fans are very quiet, they work at the level of 74-79dB - It's not much. with the standard cabin structure, it's even hard to talk. Broaching machine through the cabin By dragging the suspension beams within the cabin, the cabin improves work efficiency, thus relieving the painter who no longer has to move them by hand. Explosion-proof design Redpofzktzofx Ahvjp The booths are designed to prevent the formation of an explosive mixture during the painting process. Each of the components has been carefully selected to minimize this risk.

Condition: good (used), Year of construction: 1989, functionality: fully functional, planing width: 2,050 mm, height adjustment type: pneumatic, planing height: 300 mm, four-side planer, width: 2200 mm, on a rotary table for curved pieces, enclosed machine Rsdpjw A A Ebjfx Ahvop

Condition: good (used), Year of construction: 2008, In good technical condition and fully operational. Year of manufacture: 2008. Additional Y-axis ±60 mm Rsdpfxsxdcigj Ahvsp Maximum spindle speed 3,000 min⁻¹ Spindle motor power 22/18.5 kW Maximum driven tool speed 6,000 min⁻¹ - 300 mm chuck with 90 mm through hole, spindle head A2-8 - Increased power and torque 25/30 kW, 1,000/1,300 Nm - Turning diameter 420-500 mm - Turning length 1,250 mm - C-axis, driven tools - NC tailstock, fully programmable, separate motor - Increased Z-axis power - New chip conveyor

Condition: good (used), Year of construction: 1999, Offered is a used CNC milling machine CHIRON FZ 22 S high speed with Siemens SINUMERIK 840D control. The machine is already dismantled and ready for loading. Manufacturer: CHIRON - Works 78532 Tuttlingen Type: FZ 22 S high speed Machine no.: 497-55 Chip conveyor: Knoll 340 K-1/500 Spindle hours: 2355 h year of construction: 1999 Weight: 6500 kg Inspection report measurement from 2021 available x-way: 750 mm y-way: 520 mm z-travel: 630 mm spindle holder: SK 40 CNC control: Siemens SINUMERIK 840D table size: 1150 x 570 mm max. table load: 1200 kg tool changing device: 20 pos. Coolant device operating voltage: 400 V total power requirement: 32 kVA space requirement W x L x H: approx. 2.00 x 3.80 x 3.0 m The price is net, plus VAT, ex works free loading. Redpfskr E Nnjx Ahvsp

Condition: used, mileage: 157,226 km, power: 70 kW (95.17 HP), first registration: 06/2012, fuel type: diesel, empty load weight: 2,570 kg, maximum load weight: 930 kg, overall weight: 3,500 kg, axle configuration: 4x2, wheelbase: 4,325 mm, fuel: diesel, CO₂ emissions: 259 g/km, fuel consumption (urban): 11.1 l/100km, fuel consumption (extra-urban): 9.2 l/100km, fuel consumption (combined): 9.8 l/100km, color: yellow, driver cabin: other, gearing type: automatic, emission class: euro5, suspension: other, number of seats: 2, total length: 7,057 mm, loading space length: 4,380 mm, loading space width: 2,000 mm, loading space height: 2,000 mm, Year of construction: 2012, construction height: 2,700 mm, Equipment: ABS, airbag, central locking, electronic stability program (ESP), immobilizer system, onboard computer, traction control, Electronic problem, vehicle does not start. Purchase or trade-in of: - Vans - Forklifts - Commercial vehicles Rsdpfxowp Ulao Ahvjp - Special vehicles - Fleets Other: - Various loading options - Registration service - Delivery available within Germany for an extra charge Viewing is possible without appointment: Mon. - Fri.: 08:00 to 17:00 Sat.: 9:00 to 14:00 Address: Hauptstr. 90 76865 Rohrbach (Pfalz) Tel.: E-mail: More information can be found on We speak German / English / Russian / Italian / French / Spanish More Information Sale only to traders (agriculture, freelancers, small and large businesses) or export. Errors and prior sale excepted.

Condition: used, Year of construction: 2005, Technical details: turning diameter: 275 mm turning length: 900 mm spindle passage: 65 mm power capacity at 100 % load: 25/20 kW spindle turning speed range: 1 - 5000 U/min spindle diameter in front bearing: 110 mm c-axis: 1 - 500 U/min. Rsdpfx Aowp D Nbjhvjp number of workpiece supports: 4 tool turret: 1 x-axis: 290 mm y-axis: 165 mm z-axis: 360 mm b-axis: 360 ° rapid speed: 18/30 m/min number of tools: 2x2 + 2x2 number of driven tools: 2x2 + 2x2 mm toolpiece turning speed range: 8000 / 2000 U/min power capacity: 25% ED 5,8 kW tool taper: TRAUB 60 tool turret: 2/3/4 x-axis: 170 mm z-axis: 600/950 mm y-axis: +/- 60 mm rapid speed: 18/15/30 m/min number of driven tools: 10 mm toolpiece turning speed range: 1 - 6000 U/min power capacity: 25% ED 5,8 kW tool taper: DIN 69880 40 x 63 total power requirement: 95 kW weight of the machine ca.: 16 t dimensions of the machine ca.: 10,0 x 3,5 x 3,0 m with CNC TRAUB TX 8i, Barloader TRAUB Stamag DNH61 / 3000, Main and Sub spindle with C-axis 1 support with B-axis 3 turret supports dust exhauster, coolant attachment with coalescence-seperator and chip conveyor 2 pc. 3-jaw chuck SMW KNCS-N 170-43 2 pc. HAINBUCH Spanntop chuck 40 pc. various tool holder non-driven 6 pc various tool holder driven Spare parts package *

Year of construction: 2026, condition: new, functionality: fully functional, machine/vehicle number: 2026, NEW NEW Cream Cooker CK 60 NEW NEW Efficient operation for cooking and heating creams and masses Precise temperature control Digital timer switch, 2 speeds Kettle capacity: 60 liters Working volumes: 4 to 38 liters Rsdpfov H Titjx Ahvop Stainless steel design, thermal oil system Hand wheel for easy emptying Mobile machine with locking caster Connection: 400V, 16A CEE plug Dimensions: 960 x 780 x 1630 mm (WxDxH) NEW machine with warranty + spare parts service Options: Delivery service Leasing & rental options Touch panel LCD DN50 outlet tap Stronger heating system Maintenance contract Service package Training & commissioning You'll only find such a TOP selection with us!

Year of construction: 1992, condition: used, grinding height 50 mm grinding width 120 mm grinding wheel diameter 600 mm total power requirement 85 kW weight of the machine ca. 9500 kg D I S K U S (Germany) CNC Controlled Double Sided Vertical Spindle Surface Grinder with Rotary Workpiece Feed System and IONIC Size Control Model DDS 600 III PLM - CNC Year 1992 erial No. 7924 _____ Grinding wheel Ø x bore x height, each 600 x 150 x 75 mm Approximate Workpiece dimensions: Grinding height, approx. 1.5 – 50 mm Grinding width, appox. 20 - 120 mm Vertical quill adjustment, each, approx. 150 mm Infeed of grinding wheels via CNC 0.0001 mm Feed of workpiece transportation device, infinitely variable 40 – 235 mm/sec Grinding wheel speed, each (30 m/s) 191 - 955 rpm Grinding spindle drive, each infinitely variable 37 kW Total electrical load, approx. 85 kW - 380 V - 50 Hz Weight, approx. 9,500 kg Accessories / Special Features * SIEMENS CNC Control, Model SINUMERIK 810 G, with monitor, for 4 axes i.e. * Movement of 2 spindle quills, dressing device, WP Rotation. Direct programming of Grinding Process data on keyboard. In connection with a IONIC Size Control No. 17 A / 68.000 with two tracers for measuring the thickness of the workpieces after grinding process, and corresponding infeed of the grinding wheels. Continuous display of measuring results on the monitor, with statistics, workpiece counter, etc. Digital Display Ampere for both grinding wheel drives and for grinding spindle speeds, etc. . * Positioning control device for supervising the height of the lower grinding wheel.. * Double column design as a portal for extra stability and higher accuracy * Rotary workpiece transportation device with infinitely variable feeds. The workpieces are Manually stacked in a device and forwarded by a Rjdpfx Ast Hw Nashvep transportation carrier disk thru the grinding wheels, there are two WP- down holders, one equipped with a overheight stop-control. * Angled grinding wheel dressing device, with automatic dressing process, integrated in the control as CNC axis, with safety switch-off. * Separate large switch cabinet. * Automatic central lubrication. Large pneumatic control system * Large Coolant device 6 (F) with filtering unit and magnetic separator. * Various Grinding wheels, WP transport carrier disks, 2 flanges, large Olimist separator, etc. This machine is very suitable for simultaneous double-sided grinding of large series of workpieces, e.g. punched parts, piston rings, hydraulic parts, rotors, distance rings, etc. Condition : Very good. Machine can be soon inspected under power. Delivery : Ex stock, as inspected. Payment : Net, after conclusion of contract.

Condition: used, Working width 500 mm Redox Eykgspfx Ahvep Number of knives 4 St. knife system Streifenhobelmesser

Condition: good (used), cylindrical grinding machine Rsdetrgndspfx Ahvjp