Used Tecnova Es130N 37D Deg for sale (311)

Year of construction: 2006, condition: ready for operation (used), screw diameter: 130 mm, Single-screw extruder manufactured in 2005. This TECNOVA ES130/37D DEG features a screw diameter of Ø 130 mm and an L/D ratio of 37:1. It includes a powerful main motor rated at 246 HP and a degassing system for enhanced processing. The barrel temperature control offers individually controlled heating and cooling zones, ensuring optimal performance. If you are looking to get high-quality plastic processing capabilities, consider the TECNOVA ES130/37D DEG machine we have for sale. Contact us for further details. • L/D ratio: 37:1* • Main motor power: 246 HP (approx. 181 kW) • Degassing system: Yes • Barrel temperature control: Individually controlled heating and cooling zones • Barrel cooling: Forced-air cooling with fans • Barrel heating capacity: approx. 110.6 kW total • Electrical supply: 380 V / 50 Hz / 3-phase • Main electrical rating: 630 A Knodpfx Acsz Az Acococ • Control voltage: 110 V • Electrical cabinet protection: IP44 • Extruder length: approx. 4,635 mm Additional equipment • Vacuum pump (included)

Condition: good (used), Year of construction: 2002, functionality: fully functional, TECNOVA MINI / 60 repelletizing machine Type: ES 60 N / 35D DEG Year of manufacture: 2002, little used, completely refurbished in 2023. Availability: Immediately. Current condition: Can be viewed in operation. Screw: 60, L/D ratio: 35, Capacity: 120-140 kg/h, Feeding screw: yes, Kjdpfx Aow U Swpsccsnc Degassing system: yes, Cutting head type: head cutter, Suitable materials: PE/PP/PS. Other specifications: 8 mm diameter granules, Moisture max. 3% Foil silo, capacity 2 m3, Vacuum pump for degassing, Temperature control panel, Pressure control, Water cooling, transport, Venturi, cyclone and pipes, Dimensions: 6.40 m long x 2.10 m wide x 4.30 m high Built-in power: 30 Kw. + film granulator Meccanoplastica Type 3140 (1998) !!! Price included!!! For sale with spare parts: screw barrel, heating elements, filter changer, head cutter insulation, knives for grinder, compactor, silo bearings, cyclone, head cutter.

Year of construction: 2018, condition: excellent (used), functionality: fully functional, machine/vehicle number: 332/18, Plastic regranulation line prepared for processing both film flakes and regrind. Machine capacity: 800–1200 kg, depending on the material. Equipment: 1. Forced feeder 2. 160/54D extruder with two independent degassing zones 3. Cutting system on head, model OR1000 4. Centrifugal dryer 5. Vibrating sieve 6. Additional plasticizing unit (screw + cylinder + feed hopper) Not included in the offer: 1. Automatic mesh filter GB1000 (equivalent to Britas ABMF1050-09) Knedsy N T Uyspfx Accsc

Year of construction: 2011, condition: excellent (used), functionality: fully functional, SINGLE-SCREW EXTRUDER WITH AC MOTOR + INVERTER, AND ELECTRICAL CONTROL PANEL WITH 8 HEATING ZONES. Kodpezcav Ajfx Accjnc

Year of construction: 2003, condition: reconditioned (used), functionality: fully functional, machine/vehicle number: 041-03, Stock No. 2834 TECNOVA mini 60 granulation system, partially overhauled, in working order, ready for demonstration, consisting of: Material feed hopper Stuffing unit TECNOVA single-screw extruder with Kjdpfx Aez A Ti Eeccsnc 60 mm screw – 36 L/D – cylinder, air-cooled 1 degassing unit with vacuum pump Extruder drive 30 kW, screw speed up to 200 rpm Melt filter/screen changer Hot-face granulator, complete with die plate and knife bar Granulate/pellet blower Control cabinet, relay control A test run/sample production with your material can be arranged on short notice; details and schedule upon request. OPTIONALLY, the system can also be equipped with strand granulation; details upon request. Further granulation systems/extruders ready for demonstration are available ex-works Wuppertal.

Year of construction: 2019, condition: used, functionality: fully functional, TECNOVA 130 RECYCLING LINE Re-pelletizing line for plastic recycling Materials that can be processed LDPE, LLDPE, HDPE Screw diameter 130 mm Double piston filter Feeding silo Kedoyph I Hspfx Accjnc Single degassing Hot die face pelletizing system Centrifuge and vibrating screen Year 2019

Year of construction: 2006, condition: used, functionality: fully functional, TECNOVA 105 RECYCLING LINE with WASHING LINE Re-pelletizing line for plastic recycling with washing line Production 350 kg/h Knsdsyx D Hfspfx Accoc 2 washing tanks in stainless steel Fosha 500 grinder Buffer silo Screw diameter 105 mm Forced feeder Double piston filter Degassing unit Hot die face pelletizing system Centrifuge and vibrating screen

Condition: excellent (used), Year of construction: 2000, Robust oscillating milling machine T 26, swiveling from -45 to +45 degrees. Reversible drive motor 5 / 6kW with automatic motor brake. R/L rotation. Swiveling angle from -45 to +45 degrees, electrically adjustable. Height adjustment max. 150mm, electrically adjustable. When adjusting the height, the correction factor for the swiveling angle is displayed in the upper display, which can then be set on the stop, thus allowing settings to be realized according to drawings. Four speeds: 3000, 4500, 6000 and 9,000 rpm. Spindle diameter 30mm, quick-change spindle with torque wrench. Comfort fence T226 with digital displays for total adjustment and infeed fence individually, as well as input of the cutter diameter, whereby the cutting depth is calculated automatically. Fence with lifting device, can be swung away (for curved milling). Table extension on the right and left with extendable workpiece support. Support can be extended by 700mm. Table length approx. 2400mm. Foldable fence for edge milling. Workpiece clamping device Aigner Centrex. Original Martin cast iron table, left 500mm, right 500mm with two insert guide rails. 3-roller feed system HolzHer ET117, with 8 speeds, R/L rotation, new rollers. Feed plug, switchable from the control panel. Comfort stand with electrically height-adjustable feed support, which can be swung away for machine setup and then easily locked into place. Dust extraction port 2 x 120mm. Compressed air connection 6bar. Emergency stop switch. Some parts of the machine have been newly painted (special color RAL1015). V-belts renewed. Operating manual. CE marking. Dimensions approx. 3000 x 1500 x 1830mm (L x W x H). Weight approx. 1800kg. The machine can be demonstrated on site by appointment. We only offer machines that are available in our warehouse and ready for demonstration, see "other offers from this supplier". Kedpfezbm Tfox Acconc

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, total height: 2,000 mm, total length: 1,600 mm, total width: 1,600 mm, type of input current: three-phase, controller manufacturer: Union Dialog electronic control, compressed air connection: 6 bar, water pressure: 2 bar, Used 2018 Union MDMV 1 closed-circuit vacuum solvent degreaser, 50kg basket, Dialog control, Industrial Frigo chiller and 2 Safechem units. Manufacturer: Union Model: MDMV 1 Machine Type: Closed-circuit vacuum solvent metal degreasing / component cleaning machine Year: 2018 Condition: Excellent Includes: Industrial Frigo GR2A 30/Z industrial water chiller & 2 x SAFECHEM SAFE-TAINER chemical storage/handling units Machine Description Used 2018 Union MDMV 1 industrial metal degreasing and component cleaning machine, designed for precision cleaning of small and complex metal components using super-stabilised perchloroethylene (PCE / PER / tetrachloroethylene). This is a closed-circuit hermetic vacuum solvent cleaning system incorporating washing, rinsing, vapour degreasing, solvent recovery/distillation and vacuum drying within an enclosed process. Technical Specifications Maximum Basket Capacity: 50 kg Solvent Type: Perchloroethylene / PCE / PER / Tetrachloroethylene – C₂Cl₄ Kodpoz Itlwefx Accsnc Solvent Load: Approx. 397 kg / 248 litres Main Electrical Supply: 400 V / 3 Phase / 50 Hz Installed Power: Approx. 23 kW Rated Current: Approx. 46 A Steam Pressure Requirement: Approx. 4–5 bar Compressed Air Requirement: Approx. 6–8 bar Water Pressure Requirement: Approx. 2–3 bar Floor / Ground Loading: Approx. 549 kg/m² Control: Union Dialog electronic control This particular machine also has a substantial integrated solvent-management system incorporating working and recovery tanks, solvent pump, fine filtration, swarf filtration, still/distillation system, condenser, heat exchanger, separator, decanter, vacuum pump and active-carbon treatment. Continuous Solvent Recovery A particularly useful feature of the MDMV design is the continuous solvent distillation/recovery system. Union states that MDMV machines operate under vacuum for rapid washing cycles and use continuous vacuum distillation with automatic final stripping of residues, allowing contaminated solvent to be regenerated and reused during production. Industrial Frigo GR2A 30/Z Chiller Included The machine is supplied with a 2018 Industrial Frigo GR2A 30/Z air-cooled industrial water chiller. Refrigerant: R407C Refrigerant Charge: Approx. 5 kg Electrical Supply: 400 V / 3 Phase / 50 Hz Rated Current: Approx. 23 A Nominal Water Pressure: Approx. 3.2 bar Temperature Set-Point Range: -10°C to +25°C Weight: Approx. 390 kg The complete installation includes: 2018 Union MDMV 1 metal degreasing machine 50 kg maximum basket capacity Union Dialog control Closed-circuit solvent cleaning system Vacuum cleaning/drying system Rotating / oscillating basket system Spray cleaning capability Immersion cleaning capability Solvent vapour degreasing Integral solvent distillation and recovery Working solvent tank Recovered-solvent / waiting tank Solvent circulation pump Fine solvent filtration Swarf filtration Vacuum pump Condenser Heat exchanger Water / solvent separation Decanter Active-carbon vapour treatment system Floor safety / spill-containment tank 2018 Industrial Frigo GR2A 30/Z industrial chiller 2 x SAFECHEM SAFE-TAINER chemical handling/storage units Stainless steel containment trays Use and maintenance handbook Electrical documentation Please Note: All specifications, dimensions, capacities and descriptions are approximate and provided in good faith.

Year of construction: 2015, operating hours: 6,000 h, condition: like new (used), functionality: fully functional, machine/vehicle number: 1448380811, Set including: Centrifuge Hydraulic unit 2 feed pumps 1 flocculant pump 1 flocculant preparation tank Kjdpfsz Icw Ajx Accenc 1 electrical control panel

Condition: used, Year of construction: 2001, This machine is fitted with a new Siemens PLC and touch panel. Technical specifications: - Manufacturer: Unisanding - Model: 2.2.0. 0-30 - Working width: 1300 mm - Year of manufacture: 2001, retrofitted in 2025 - 2 rollers, flexibly adjustable from 0–30°, operating from above - Flex-Trim special brushes - Vacuum belt with vacuum motor - With glass panel on the operator side - Sanding motors: 2 × 2.2 kW with thermal cut-out - Feed motor: 1 × 1.5 kW with thermal cut-out - Vacuum motor: 1 × 5.5 kW - Roller height adjustment axis: 1 × 0.18 kW - Feed speed: 2–10 m/min, frequency-controlled - Brush speed: 50–350 rpm, frequency-controlled - Voltage: 3 x 400 V, 50 Hz - Electrical power rating: 15 kW - Fuse: 63 A - Exhaust air volume (vacuum): 3,000 m³/h - Dust extraction volume: 5,000 m³/h (to be provided by the customer) - Length: 2,170 mm - Width: 2,040 mm - Height: 2,030 mm - Weight including control cabinet: 2,220 kg - Colour: RAL 7035 light grey/black - Operating side: left/right - Brush replacement side: right - Explosion-proof version: No Kjdpfx Acjxtakmeconc - Location: at the Blomberg warehouse

Condition: used, Bous 3-chamber spray cleaning system (direct degreasing) System: 3 separate washing chambers (ideal for washing/rinsing/drying in a single cycle) Chamber size (W x H x D): 500 x 300 x 1,000 mm (perfect for long, curved workpieces) Equipment: Integrated thermostat for precise bath temperature control Control: Siemens PLC with Siemens SIMATIC operator panel Machine has already been professionally disassembled and is ready for loading onto a pallet. Knjdpfx Acjzz H Iuocec "Everything from a single source: We would be happy to offer you suitable bank financing for your project." More new and used items can be found in our shop! International shipping costs available upon request!

Condition: used, Weiss Type: SWT 600/800-S Spray Water Test Unit for IP protection tests IPX1 / IPX2 / IPX3 / IPX4 / IPX4K / IPX9K For sale is a professional spray water test unit from Weiss Umwelttechnik GmbH. The unit is used to perform standardized water, spray water, and ingress protection tests on components, housings, electronic components, vehicle parts, and technical products. Suitable for industry, automotive, electronics, quality assurance, development, testing laboratories, as well as research and material testing. Operation is via an integrated touch panel. Test sequences can be automated. The unit features a stainless steel test chamber, rotating test table, swivel arm, water circulation, and available test accessories. Technical data according to the nameplate / documentation: Electrical data: Knodpfxozachce Accoc Voltage: 3/N/PE AC 400 V ±10 % Frequency: 50 Hz Rated power: 17 kW Rated current: 30 A Wiring diagram No.: 82962 CE marking available Water connection according to documentation: Water inlet: R 3/4" Water outlet: R 1 1/4" Water pressure supply line: approx. 2 – 6 bar Water pressure IPX9K: adjustable approx. 80 – 100 bar Turntable speed: approx. 1 to 5 RPM Swivel speed: approx. 60 °/s Permissible ambient temperature according to documentation: approx. 10 °C to 35 °C Dimensions and weight: Test chamber SWT 600/800: approx. 2350 x 2400 x 2650 mm with hinges and door lock Test chamber without hinges and door lock: approx. 2350 x 2400 x 1850 mm Weight of the test chamber: approx. 650 kg High-pressure unit: approx. 850 x 1200 x 800 mm Weight of the high-pressure unit: approx. 380 kg Total weight according to available data: approx. 1030 kg Noise level according to documentation: approx. 88 dB(A) Heat dissipation to the environment: average approx. 1 kW maximum approx. 3.5 kW Equipment: Touch panel Stainless steel test chamber Rotating test table Swivel arm Water circulation pump Nozzle ring / spray ring High-pressure unit Flow meter ESD earthing point CE marking Robust industrial design Available documentation: Operating manual EC declaration of conformity Quality test certificate Technical documentation as shown in the pictures Accessories include, among others, as shown in the pictures: Various spray and test components Nozzle ring / spray ring Swivel arm accessories Flow meter Connection components Tools / keys Test accessories Documentation and documents Inspection and testing on site is possible and desired after prior appointment. Scope of delivery: Weiss Umwelttechnik SWT 600/800-S Spray Water Test Unit High-pressure unit Turntable / swivel arm Test and spray accessories as shown in the pictures Operating manual / documentation Accessories and components as shown in the pictures Condition: Used Optical condition see pictures Scope of delivery as shown in the pictures The table shown in the photos and any other items not explicitly mentioned are not part of the sale. Shipping or freight forwarding is possible. Subject to changes, errors and prior sale We will be happy to answer any further questions by telephone.

Condition: excellent (used), Year of construction: 2016, operating hours: 16,000 h, functionality: fully functional, nominal power (apparent): 11 kVA, controller manufacturer: haas, spindle speed (min.): 10 rpm, spindle speed (max.): 10,000 rpm, spindle motor power: 11 W, number of spindles: 1, number of slots in tool magazine: 21, Equipment: chip conveyor, Here is the complete reference sheet combining the Haas DT-1 machine specifications, probing package, and 5-axis setup in metric units. 2016. Located in Israel Transport cost to Erope 8000 Euro under power Machine Travels & Work Envelope X-Axis Travel: 508 mm Y-Axis Travel: 406 mm Z-Axis Travel: 394 mm Spindle Nose to Table Top: 152 mm – 546 mm Worktable Table Size (L x W): 660 mm x 381 mm Max Weight on Table: 113.4 kg T-Slot Width: 15.9 mm – 16.0 mm T-Slot Center Distance: 125 mm (3 standard slots) Spindle Specs Spindle Taper: BT30 Max Speed: 10,000 RPM ATC 20+1 5-Axis Setup (TRT100 Dual-Axis Rotary Table) Kjdpfx Acezwxz Ejconc Rotary Unit: TRT100 dual-axis tilting trunnion (mounted on the table). Platter Diameter: 100 mm Max Part Swing: 213 mm Weight Capacity on Platter: 6.8 kg (3+2 positioning) / 2.3 kg (simultaneous 5-axis) Travel: A-axis (Tilt) ±120°, C-axis (Rotation) 360° continuous Indexing Speeds: 1,000 deg/sec on both axes Control Requirements: 4th & 5th-axis drive options installed on the machine control. Key Software Features: Supports 3+2 indexing and continuous 5-axis simultaneous machining. DWO/TCPC (Dynamic Work Offsets / Tool Center Point Control): Manages work offsets automatically as part angles tilt/rotate, eliminating the need to re-post programs when mounting locations change. Working Clearance: The TRT100 unit consumes ~230 mm of vertical space, leaving a tight Z-axis machining clearance window (~160 mm) inside the machine's 394 mm total Z-travel. Probing & Tool Measurement (WIPS-R / Renishaw) Hardware Package: Workpiece Spindle Probe: Renishaw OMP40-2 (BT30 optical touch probe) Tool Setter Probe: Renishaw OTS (Table-mounted optical tool setter) Receiver: Renishaw OMI-2T (Modulated optical transmission) Tool Setter Functions: Automatic tool length offset setting, rotating tool diameter offset calibration, and in-cycle tool breakage detection. Workpiece Probe Functions: Work Coordinate System (G54–G59) setting, feature inspection (bores/bosses/surfaces), and part alignment skew angle calculation.

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, CLEANROOM - ISO 8 | Cleanroom requirements ISO Class 8 | ISO Cleanroom Class 8 | Cleanroom classification. In order to achieve an ISO 8 air purity class in a Cleanroom, several levels of air filtration are usually used (e.g. G4 pre-filter, F9 filter, H13 final filter). Air movement in the room is non-unidirectional (there is a mixing of "clean" air supplied to the room with "dirty" air present in the room). Air vents in the ISO 8 room are placed on the walls. The required number of air exchanges per hour will depend on the nature of the activities conducted in the room and the number of personnel present, but the goal could be to provide 10-40 air exchanges/hr. In ISO Class 8, personnel are often present continuously. Employees may be dressed in standard work attire and visitors in a disposable apron. It is recommended to maintain a minimum overpressure of the room relative to the adjacent zone of 5-10 Pa. Requirements for equipment and materials intended for Clean Room with ISO air cleanliness class 8 (maximum average amount of particles released when: number of samples taken = 100; measurement performed in accordance with ISO 14644-14 in a cleanliness class at least one better than the purpose of the device; number of particles/m3) Detailed description in photos. Technical drawings attached to photos. Knodpfxsq H H Rus Accec Description of ventilation The purpose of the ventilation installation performed was to achieve the following air parameters in the Clean Room. The installation was made with the GBD PHARMA 2000 system, meeting all the requirements for 'clean rooms' in the highest classes of air purity. Parameters for the installation: a. Air purity - ISO 8. b. Temperature 19-23 st C c. Humidity max 38%. a. To ensure the required purity of the supplied air, an air handling unit manufactured by DOSPEL with a maximum capacity of V= 3500 m3/h [up to 15 air changes per hour] was used. The air handling unit is equipped with pocket filters : pre-filters FK EU5/EC2 and fine filters FK-EU9/EC2. In addition, HEPA 11 filters made by EUFILTER were used in diffusers located in the ceiling. Data sheets in point H6. As a result , with a measured flow rate of 3264 m3/h, an ISO 7 [class "C"] cleanliness class of the room was obtained in the resting state, and thus an ISO 8 [class "D" ] cleanliness class for the working state. b. The temperature range of 19-23 deg C is for the enlarged cooler and chiller to be freely maintained with 25% fresh air. c. In order to achieve in summer conditions with high temperatures of 30 deg C and humidity of 80%, a freon chiller of 31.4 kW and a chiller of 33.5 kW of cooling power were used. The chiller is made by FUJITSU supplied by Klimatherm Gdansk. The room is automatically regulated overpressure in relation to the external pressure - the pressure difference at the door : 15 Pa The automation of ventilation allows for "economical" mode , in which the installation works in a closed circuit and an overpressure of 15 Pa is maintained. Technical data attached to the photos.

Condition: used, Year of construction: 1978, Liter per hour: 7000 Knodpfxez N S T De Accoc

Condition: used, mileage: 39,750 km, power: 180 kW (244.73 HP), color: black, gearing type: automatic, Equipment: ABS, airbag, central locking, power assisted steering, seat heater, - Passenger airbag - Electronic window lifters - left - Electronic window lifters - right - Driver airbag Ksdpfxjz Rtu Se Accsnc - To ensure you receive the best possible advice, we kindly request you to schedule an appointment. Mr. J. Ebert will be happy to assist you. Exterior: 197U Obsidian Black Metallic, FABRIC/LEATHER BLACK, TRIM ELEMENT WOOD OAK GRAY OPEN-PORED, SMARTPHONE INTEGRATION PACKAGE, MEMORY PACKAGE (DRIVER SEAT, STEERING COLUMN AND MIRRORS), INTERIOR LIGHT PACKAGE, INTERIOR CHROME PACKAGE, AERODYNAMICS PACKAGE, KEYLESS-GO PACKAGE, LUXURY INTERIOR PACKAGE, AMG LINE EXTERIOR / AMG SPORT PACKAGE EXTERIOR, PARKING PACKAGE HIGH, MIRROR PACKAGE, THEFT PROTECTION PACKAGE, MEMORY PACKAGE FRONT, FEDERAL REPUBLIC OF GERMANY, MB-CONNECT SERVICES FOR NAVIGATION, OPERATING MANUAL AND SERVICE BOOKLET - GERMAN, SMARTPHONE INTEGRATION CARPLAY, SMARTPHONE INTEGRATION ANDROID AUTO, COMMUNICATION MODULE ECE VERSION, BLIND SPOT ASSIST, ACTIVE PARKING ASSIST, DRIVER SEAT LEFT ELECTR. ADJUSTABLE WITH MEMORY, ACTIVE LANE KEEPING ASSIST (CAMERA), INTERIOR AND EXTERIOR MIRRORS AUTOMATICALLY DIMMING, COLLISION WARNING WITH ACTIVE BRAKING FCW-STOP, GPS ANTENNA, EXIT WARNING ASSISTANT, TELEPHONE ANTENNA, KNEE BAG, CONVERTER VERSION 10, SC FOR VEHICLE WIDTH/LENGTH OVER 2M/6M, MBCONNECT EXTENDED CONNECTIVITY, ECALL EMERGENCY CALL SYSTEM (HERMES), HERMES COMMUNICATION MODULE LTE, HARD DRIVE NAVIGATION, LIVE TRAFFIC CAPABILITY (HERMES), HU LANGUAGE PACKAGE FOR ECE/ROW, PANORAMIC SLIDING ROOF/-GLASS ROOF, AUTOMATIC TRANSMISSION 9-SPEED, HEATED STEERING WHEEL, TIRE PRESSURE MONITORING SYSTEM HIGH LINE / MID LINE, UNDERBODY PROTECTION, LOWERED SERIES CHASSIS, EQUIPMENT SWITCH ELEMENTS (FOUR WHEELS), VOLTAGE DROP PROTECTION FOR START-STOP SYSTEM, EXTERIOR MIRROR LEFT AND RIGHT FOLDABLE, SURROUND VIEW SYSTEM, SPEED LIMIT DISPLAY, RATING LANGUAGE PACKAGE EURO-NCAP, ROOF LINING FABRIC BLACK, DIGITAL RADIO STANDARD DAB (DIGI. AUDIO BROADCAST), BURGLAR AND THEFT ALARM SYSTEM BASIC (EDW), CLIMATE CONTROL, LOGO PROJECTION ON MIRROR, SKD VEHICLES DELIVERY SCOPE RUSSIA, AUTOMATIC HIGH BEAM SWITCHING (IHC), HEADLIGHTS LED STATIC LEFT-HAND TRAFFIC, PRODUCT PROTECTION FOR TRANSPORTATION, SPARE WHEEL (MINI SPARE), LUGGAGE COMPARTMENT COVER, ADDITIONAL USB PORTS, AMG STYLING FRONT SPOILER, SIDE SKIRTS, MOUNTING EYES CONVERTER HOUSING FOR OIL FILTER, WHEEL ARCH EXTENSIONS (CLADDING) SIZE L, PREMIUM SOUND SYSTEM, CENTRAL DISPLAY SIZE L, SENSOR FOR REAR LIFTGATE OPENING/CLOSING, SEAT HEATING DRIVER SEAT LEFT AND RIGHT, HEATED WINDSHIELD WASHER SYSTEM, INTERIOR LIGHT PACKAGE, INTERIOR PROTECTION, KEYLESS-GO, AUTOMATIC REAR DOORS, WIRELESS TELEPHONE CHARGING FRONT AND ANTENNA, PARKING ASSIST WITH LATERAL FUNCTION (UN R79), ADJUSTMENT STEERING WHEEL OPERATION ASSISTANCE SYSTEM, I-SIZE MARKING (ISOFIX SUCCESSOR), INTERIOR CHROME PACKAGE, FUEL TANK WITH LARGER VOLUME, EXHAUST… Metallic, Sliding roof, Alloy wheels, Electronic immobilizer, ESP, Navigation system, Service booklet available, Particle filter, Warranty, Rain sensor, Panoramic roof, Electric side mirrors, Sports package, Bluetooth, On-board computer, Electric seat adjustment, Hands-free device, Multifunction steering wheel, Isofix, Light sensor, Traction control, Non-smoking vehicle, Start/stop system, Roof rails, Lane keeping assist, Emergency braking assist, Keyless central locking, Blind spot assist, Alarm system.

Condition: ready for operation (used), Year of construction: 2021, operating hours: 15,000 h, travel distance X-axis: 800 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 800 mm, controller manufacturer: SIEMENS, controller model: SINUMERIK 840D sl, spindle speed (max.): 10,000 rpm, number of slots in tool magazine: 100, number of axes: 4, This 4-axis HELLER H5000 horizontal machining centre was manufactured in 2021. It features a working range of 800 mm in all axes and a maximum workpiece diameter of 900 mm. The machine includes a tool taper of HSK-A 100 and a tool magazine capacity of 100 slots. If you are looking to get high-quality machining capabilities, consider the HELLER H5000 machine we have for sale. Contact us for further details. Knodez Ixt Hspfx Accoc - Machine Count: 2 units- Control Unit: Siemens SINUMERIK 840D solution line with 24" Multitouch Main Control Panel and HELLER Operation Interface- Working Range (X/Y/Z Axes): 800 / 800 / 800 mm- Drive Package: POWER Package (Standard Drive in X/Y/Z)- Rapid Traverse (X/Y/Z Axes): 50 m/min- Acceleration (X/Y/Z Axes): 5 m/s²- Feed Force X- and Y-Axis (ED S3 -40%): 15,000 N- Feed Force Z-Axis (ED S3 -40%): 20,000 N- Feed Axis Servomotors: Incremental Encoders- Linear Axis Positioning Tolerance (Tp): 0.005 mm- Working Unit: PC 100 i Power Cutting Unit (10,000 rpm, 45 kW, 360 Nm)- Tool Taper: HSK-A 100 according to DIN 69 893- Tool Magazine: 100 Slots, Chain Type (HSK-A 100) with Comfort Operator Terminal at Tool Setup Station- Tool Breakage Control: Fast Drill Breakage Control- Collision Monitoring: Damage Minimization Monitoring System- NC Rotary Table (B-Axis): 360,000 x 0.001 deg Indexing, 25 rpm, 8 arcsec Accuracy, 12,000 Nm Max. Tangential Moment, 18,000 Nm Max. Tilting Moment- Plane Transformation: CYCLE 800- Workpiece Setup Station: Manually Rotatable 4 x 90 deg- Workpiece Clamping Interface: 5-way Media Interface, Hydraulic Pressure 200 bar Proportional Technology- Pallets: 2 Special Pallets in Basic Machine (HELLER Drawing AP.205705) with DIN Hole Pattern- Pallet Dimensions: 630 x 630 mm- Max. Workpiece Diameter: 900 mm- Max. Workpiece Height: 1,000 mm- Max. Clamping Load (Pallet 1): 1,000 kg (single-sided) / 1,400 kg (double-sided)- Pallet Change Time: 13 s (without hydraulic clamping) / 13.5 s (with hydraulic clamping)- Coolant & Chip Conveyor: Scraper Belt Conveyor for Wet Machining- Cooling Systems: Precision Water-Air Chiller Unit (Compressor) for Direct Drives of A- and B-Axes, Spindle, and Control Cabinet; Coolant Temperature Control Unit- Mist Extraction: Emulsion Extraction System- Electrical Connection: 3~ 400 V / 50 Hz, Nominal Current 65 A, Short Circuit Rating 9 kA- Total Connected Power: approx. 37 kVA (Machine) + approx. 14 kVA (VRF Coolant Unit)- Compressed Air Supply Pressure: 5 - 6 bar- Permissible Ambient Temperature: 10 - 45 °C- Material Processed: Aluminum (exclusively)- Operating Hours: approx. 12,000–15,000 hours (pending confirmation)- Operational Status: Currently installed/in place and powered onOptional Machine Equipment:- Special Mount: Multi-Spindle Heads (HELLER Drawing 00.882914 MAGNA)- Tool Measurement: RENISHAW Radio Touch Probe RMP 60 with Receiver & HELLER Measuring Cycles- Coolant Filtration Unit: Vacuum Rotary Filter KNOLL VRF 250 with 50 bar High-Pressure Internal Coolant Supply (IKZ), Working Area Flushing, 1,200 L Tank Capacity Technical Specification Taper Size HSK 100

Condition: excellent (used), Year of construction: 1983, functionality: fully functional, machine/vehicle number: 1404, total width: 1,690 mm, total length: 3,410 mm, total height: 1,915 mm, overall weight: 3,000 kg, TECHNICAL DATA Capacity - Height of centres: 125/175mm - Distance between centers: 400mm; 700mm; 1025mm - Max.travel of longitudinal slide: 400mm; 700mm; 1025mm Table - Table speed steplessly adjustable: 0.5 - 5.5 m/min. - Reversal dwell of table: 0-6 sec. - Minimum automatic stroke approx.: 1.5mm - Maximum swivel of table: 400 deg.- 12 ; 700 deg. -10; 1025 deg.- 8 - Travel per revolution of handwheel: 25mm Workhead - Swivel towards grinding wheel: 90 deg. - Spindle speed, steplessly variable: 30 - 675 RPM - Spindle nose taper: Morse 5 - Collet shank diameter: 25mm - Diameter of 3-jaw chuck: 160mm Wheelhead - Grinding wheel L.H. or R.H.: - Diameter (special exec. 6.25kW/8.4 HP): 400 (450) mm - Maximum width: 50 (80) mm - Bore: 127 (203) mm - Spindle speeds (3-step Vee-belt pulley) - Grinding wheel dia 400: 1500/1625/1800/2000/2200/2400 RPM - Grinding wheel dia 450 (8.4HP): 1340/1500/1625/1800/2000/2200 RPM - Grinding wheel motor approx.: 3kW - Grinding wheel motor, special for 450 dia wheel approx.: 6.25kW - Rapid travel of wheelhead: - Hydr.approach and retraction: 40 mm - Additional adjustment with hand leveler: 210 mm - Swivel of the whole cross slide L.H. and R.H.: 45 deg. - Interminent feed, steplessly adjustable (on dia) at left or right hand table reversal, or both: 0.001 - 0.05 mm/sec. - Plunge feed, steplessly adjustable (on dia): 0.0002 - 0.1 mm/sec. - Maximum depth of plunge on dia: 1.7 mm Motor rating - Wheel spindle, standard: 3 kW - Wheel spindle special rating: 6.25 kW - Workhead: 0.55 kW - Hydraulics: 0.55 kW Kjdpfxsupiyco Acconc - Coolant pump, standard: 0.17 kW - Coolant pump, inteclon: 1.1 kW Workpiece weight - Maximum between centers: 80 kg Extras: grinding wheels, coilets, other additional equipment, user manuals

Year of construction: 2000, condition: used, functionality: fully functional, We offer these used USF sandblasting and painting booths, model 2 sandblasting booths and 1 painting booth, manufactured in the year 2000. Manufacturer: USF Model: 2 sandblasting booths and 1 painting booth, 12 meters x 5 meters x 5 meters Year of manufacture: 2000 Condition: Used Category ID: 227 Knsdpfxjz I T Nve Accjc Type: 2 sandblasting booths and 1 painting booth, with dimensions of 12 meters long, 5 meters wide, and 5 meters high. The entire unit is in working order and comes with operating accessories. It is available for dismantling on-site (in the Var department, 83) from mid-December. Dismantling and removal are the responsibility of the buyer. If you have any questions or need more information, please feel free to send us a message or call us.

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, MAJA SKINNY | Automatic skinning machine / strip defatting machine Manufacturer: MAJA-Maschinenfabrik Hermann Schill GmbH & Co. KG Model / Type: SKINNY Serial number: 43188 Year of manufacture: 2001 Power supply: 400 V, 50 Hz, 3~ (three-phase), 2.2 A Power: 0.75 kW Overall dimensions: 1200 x 800 x 1200 mm Length of conveyor belt: 3700 mm Knodpfxoz S Rg Ie Accoc The MAJA SKINNY is a professional, automatic strip skinning machine from the renowned German manufacturer MAJA, designed for the quick and precise removal of skin and defatting of meat products (including pork, beef, and poultry). The device is widely used in meat processing plants, butcher shops, cutting rooms, and food processing facilities focused on continuous performance and high-quality finished products. The use of an automatic strip feeding system ensures a continuous flow of raw material, which significantly increases efficiency compared to manually operated devices and guarantees the highest level of operator safety. The cutting mechanism precisely separates the skin from the meat without excessive loss of valuable raw material, allowing for optimal processing profitability.

Condition: used, Bous Waschfix Cleaning and Degreasing System For sale is a professional, industrial parts cleaning system/washing machine of the "Waschfix" type. This system is ideally suited for workshops, production facilities, or metalworking companies for the thorough cleaning, degreasing, and maintenance of components and workpieces. The system is robustly built and features an external, high-quality pump and stainless steel filter unit for cleaning the washing medium, as well as a clear and intuitive control panel. The device cleans highly efficiently using a hot water spray process (up to +70 °C) with environmentally friendly, water-based cleaners (pH value 7–11). Thanks to the integrated two-hand safety operation and the clear control panel, operation is absolutely safe and straightforward. Technical data: Manufacturer: Bous Type: Waschfix Manufacturing number: 18251 / 2001 Capacity (filling volume): 120 liters Permissible cleaning agent: pH value 7 – 11 (neutral to alkaline) Maximum operating temperature: 70 °C (thermostat controlled) Heating power (electric): 6 kW Required compressed air connection: 6 bar (for the blow-off function) Electrical connection: 230 / 400 V | 50 Hz Total power consumption: 16 A Net system weight: approx. 450 kg Special equipment: Includes a sturdy floor collection tray with skids (ideal for easy transport with a pallet truck or forklift). Scope of delivery: Main washing cabinet, control unit, separate pump and filter unit made of stainless steel, collection tray. Knedez Rm U Sjpfx Accjc "Everything from a single source: We would be happy to offer you suitable bank financing for your project." More items – new and used – can be found in our shop! International shipping costs on request!

Condition: used, functionality: fully functional, Workpiece diameter: 1 – 18 mm Cutting discs up to: 100 x 1 mm Kedpsz Hbchefx Accjnc Bore: 20 mm

Condition: used, For sale: 90-degree bend from KOPPENS Netherlands; Kodpfx Acoz Tlncecsnc Tetra Laval Food Koppens Type: RT90-8 1000T Machine no. RT90-8/1000R-258 380V; 50 Hz; 0.059A Weight: 210 kg; Net price: 500 EUR PRICE NEGOTIABLE

Condition: ready for operation (used), Year of construction: 2019, operating hours: 1,400 h, travel distance X-axis: 520 mm, spindle speed (max.): 12,000 rpm, number of axes: 5, This 5-axis Hurco VC500i was manufactured in 2019. It features a robust control unit with WinMax software, ensuring efficient operation. The machine includes additional equipment such as a chip conveyor and a Spaleck finishing unit, enhancing productivity. If you are looking to get high-quality machining capabilities, consider the Hurco VC500i vertical machining centre we have for sale. Contact us for further details. Kodpfxez Hzbde Accenc - AC Volts: 400 V- Phase: 3 Phase- Frequency: 50 Hz- Largest Motor: 9 KVA / 12 AMP- Full Load: 34 KVA / 49 AMP- Interrupt Capacity: 10000 AMPS- Short Circuit Current: 20 kA RMS Symmetrical- Max Ambient Temp: 35 DEG. C- Diagram No.: 003-4610-110- Control Unit / Software: WinMax (System Konfiguration)- Additional Equipment: Chip conveyor, Spaleck finishing unit/container, compressed air/coolant system line