Used Shredder Domestic Price On Request for sale (38,438)

Condition: used, Year of construction: 2025, New demonstration machine! List price €25,500 net. Machine concept WL 4 / 18.5 kW. The Weima high-performance shredders, with their flexible application options, can process all types of wood-based materials (hardwood, softwood, chipboard, MDF materials, plywood, veneer remnants, etc.) into wood chips, and achieve an enormous volume reduction of the material, especially with bulky materials. Operating principle: The machine is equipped with a large feed hopper and can be fed either via a conveyor belt or by hand. This hopper can be adapted to individual needs and guarantees a continuous and cost-effective material feed without the need for manual assistance. The hydraulically controlled slide feeds the wood waste to be shredded to the cutting area of the rotor and is automatically and load-dependent. The internal slide guides are made of highly abrasion-resistant plastic (polyamide) and can be adjusted. The hydraulic cylinders are suspended on universal joints to avoid transverse forces on the piston seals. The patented and profiled V-rotor made of solid steel has a diameter of 256 mm and operates with a rotor speed of 80 - 120 rpm. The concave, aggressive and 4-way rotatable knives/cutting inserts are located in milled knife pockets on special knife carriers. This patented system guarantees, through the resulting reduction of the cutting gap between the counter-knife and the rotor, a high throughput, low energy consumption and an optimal discharge of the shredded material. The screen attached under the rotor determines the chip size (10 - 100 mm). On request, a hydraulically opening screen basket is also available. The power transmission from the electric motors is via V-belts to a heavily dimensioned gearbox, which is attached to the rotor stub on one side. Equipment and technical data: Drive power 18.5 kWHopper opening with Logspacer: 600 x 1,050 mmHopper capacity: approx. 0.6 m³Working width of the rotor: 600 mmDiameter of the rotor: 252 mmRotor speed 60-100 rpmNumber of knives: 28Type and size of knives: concave / 40 x 40 mm, cutting insertsScreen size: 12/10 mmPainting: Weima Standard RAL 2002 / 7016Connection value: 400 V +/- 5% / 50 HzWeight approx. 1,300 kg including:Control cabinet with display and 5 m cableElectrical controlStar-delta startRubber vibration elementV-rotor (patented) with knife pockets milled into the profileGearbox limit switch2nd knife rowClamping bar on the slide Location: Bljdpfx Aszuf U Tsmren

Condition: used, Year of construction: 2026, New exhibition machine! General technical features: - Control system: 7.0" touchscreen ConnectTouch - Cutting height and cutting angle are electronically controlled, with digital input of cutting height and angle (controlled positioning of the motorized axes) as well as movement of the motorized axes in hold mode (movement of the axes via push button); Display resolution: 0.1 mm or 0.01°; Repeat accuracy ± 0.05 mm or ± 0.005° - Weight: approx. 1,600 - 2,200 kg - Table size: 860 mm x 1,270 mm in gray cast iron; Table extension as standard across the full table width - Table height: 900 mm - Stand: The machine stand is a stable, thick-walled composite construction, implemented in this form and perfection exclusively by MARTIN. The intelligent combination of the two materials, steel and concrete, creates a high-quality stand that is unsurpassed in terms of stability, damping capacity and torsional stiffness. - Tools: Diameter 250 - 450 mm, optionally up to 550 mm; Main saw blade ø 30 mm with auxiliary holes, Scoring saw blade ø 36 mm; Tool cutting width max. 20.0 mm for machines with single-sided tilt, 6 mm for machines with double-sided tilt; Saw blades up to 350 mm can be recessed under the table. Special tool diameter max. 400 mm, weight max. 12.0 kg - Tool change: Quick-change system ProLock - Tool swivel: 0° to +47°, optionally -46° to +46°; Swivel is only possible with saw blades up to 6 mm cutting width - Cutting height: 0°: max. 155 mm / Saw blade ø 450 mm; optionally: max. 205 mm / Saw blade ø 550 mm T7710/1: +45°: 106 mm / ø 450 mm; optionally 141 mm / ø 550 mm T7710/2: +45°: 104 mm / ø 450 mm; optionally 144 mm / ø 550 mm -45°: 88 mm / ø 450 mm; optionally 123 mm / ø 550 mm - Motor: State-of-the-art synchronous motor SynchroDrive with large power reserves in energy efficiency class IE4 - Motor power: 5.5 kW, optionally up to 11 kW; due to its design, the motor can be overloaded several times its rated power for a short time and therefore offers large power reserves - Speed: Continuously variable 1,000 - 5,000 rpm - Control panel: The control panel is at eye level and is pivotably mounted around its vertical axis. In addition, it can be swivelled to the right, so that even larger components can be easily processed - Rip fence: Standard length 3,000 mm, table length corresponds to cutting length; position-independent locking; guides hardened, wear-resistant, self-cleaning; table edge replaceable; made of anodized aluminum - Length stop: Made of anodized aluminum with continuous support, fine adjustment for both flap stops; Measurement display via scale with magnifying glass; Cutting length 95 - 2000 mm, extendable up to 3220 mm - Crosscut table: Made of steel with powder coating, workpiece support in anodized aluminum, two sliding struts to extend the support surface; Length stop can be placed in the front and rear position without lifting; One-hand clamping on the support surface 1340 x 650 mm - Surfaces: Stand: Stand with high-quality powder coating; Cast iron: Table surface finely milled; Aluminum: Aluminum components anodized - Protective cover / Extraction: Height-adjustable protective cover including interchangeable rear part for angular cuts; Protective cover for saw blades up to ø 450 mm (optional 550 mm); Extraction connection on the cover: Ø 80 mm, on the machine stand Ø 120 mm; Total extraction connection Ø 140 mm; Minimum air volume: Vmin 18.5 m3/min at 20 m/s, underpressure 1,400 Pa - Electrical equipment: Connection Bjdpfoz A Hh Uox Amrsln

Condition: used, Year of construction: 2025, New demonstration machine! List price available upon request! The STANDARD – a generic term and the world’s best-selling saw of its kind – has been on the market for over 40 years. Its current highlights: absolute angular accuracy thanks to the double locking of the saw beam, the integrated strip stop for repeat cuts, and the integrated TRK extraction system. Two versions of the dust extraction system allow for limit values of significantly less than 2 mg of dust per m3 of air (TRK2) or significantly less than 1 mg/m3 (TRK1). Saw frame: · Manufacturing of the machine with precision parts to 1/100 mm · Solid, self-supporting, firmly welded, torsion-resistant saw frame · TRK2 Automatically adjusting aluminum slat grid with plastic supports · TRK1 Automatically adjusting wooden support panel · 17-point roller support with 3 brake pedals (Type 6224) · 5.15 m long, split center support at an optimal working height (Type 6224), with aluminum grids · Aluminum small parts support (1 pair), individually usable Saw beam: · Stable, durable saw beam steel construction Sawing unit: · Effortless operation thanks to a fully balanced sawing unit · Robust mounting of the motor carriage ensures high cutting accuracy · Powerful, high-torque 5.5 kW motor (7.5 HP) · Carbide-tipped circular saw blade 300/30 mm · Saw blade overhang 9 mm · Integrated stop for horizontal strip cuts · SUPERSILENT sound insulation to reduce saw blade noise · Mechanical motor brake Design, ergonomics: · Typical STRIEBIG product design · Functional and user-friendly ergonomics Assembly: Wall or free-standing assembly possible Saw blade: 300 mm, scoring, 60 teeth Cutting area: L: 5300 x Hvert: 2240 / Hhor: 2100 x T: 80 mm consisting of: 1.00 Cutting interface distance vert. 1000 mm 1.00 Language documentation DE 1.00 Saw motor Y-D, 400V, 50Hz, A05 TRK 4.00 Free-standing support complete 1.00 Small parts support aluminum complete (2-part) 1.00 Operating hour counter 1.00 Paper holder Availability: on request! Location: Rieth Bjdpfx Aozx E Twjmroln

Condition: used, Year of construction: 2025, New demonstration machine! Price on request! The CONTROL has always defined its own class – the premium class for vertical panel saws. But even this leading position doesn't stand still. We have developed the CONTROL into the premium class's vertical cutting center, with increased automation of the sawing process and additional equipment options. Above all, the 12" touchscreen computer and the new machine software ensure improved ease of operation in every detail. Saw frame: • Machine components manufactured to a precision of 1/100 mm • Solid, self-supporting, firmly welded, and torsion-resistant saw frame • Full-surface support table made of birch plywood with integrated small parts support • Auxiliary fence profile with its own measuring tape and 3 auxiliary stops for repeat cuts • Automatic detection of the center support • Automatic roller locking during the sawing process Saw beam: • Stable, durable saw beam steel construction • Automatic saw beam locking with cutting interface detection Saw unit: • Backlash-free, smooth-running guides • Robust mounting of the motor carriage ensures high cutting accuracy • Powerful, high-torque 5.5 kW motor (7.5 HP) • More comfort thanks to largely automated operation • Laser-assisted display of the horizontal cut • Automatic motor carriage clamping • Automatic lowering and pivoting of the saw motor • Pneumatic clutch for easy switching to manual operation • SUPERSILENT sound insulation to reduce saw blade noise • Electromagnetic motor brake Control: • 12" touchscreen computer with optimal user guidance • Multilingual user guidance • Tool database guarantees high flexibility and absolute repeatability • Fully automatic sawing process • Infinitely variable feed speeds 10-25 m/min • Selectable sawing cycle • Panel end detection • Constant return speed • Operating hour counter • Network connection • UPS 24VDC for touch PC (uninterruptible power supply) Dimension setting: • Digital measuring system DMS.x (horizontal axis for vertical cuts) • Electronic positioning system EPS.y including ABO (vertical axis for horizontal cuts) Mounting: • Wall or free-standing mounting possible Saw blade: 300 mm, scoring saw, 60 teeth Cutting range: L: 5300 x Hvert: 2240 / Hhor: 2100 x T: 80 mm, consisting of: 1.00 Cutting interface distance vertical 1000 mm 1.00 Language documentation DE 1.00 Saw motor 1-phase, 400V, 50Hz, EVO/CON 1.00 Feed speed 10-25 m/min 1.00 Scoring saw unit VSA (scoring saw infinitely adjustable) 4.00 Free-standing support, complete 1.00 Small parts support, aluminum, complete (2-part) 1.00 STRIEBIG ExpertCut CON consisting of: - Electronic positioning system EPS-X - Automatic saw beam positioning ASP - User guidance with STRIEBIG ExpertCut software license for 1 office workstation (network license) - Label printer - Network connection - Operating manual - Paper holder 1.00 UPS 24VDC for touch PC (uninterruptible power supply) 1.00 Block parts, initial license 1.00 Service: data import / label layout (remote) 1.00 Basic training STRIEBIG cutting optimization (online training) Bodpfxezx E T Ds Amrsln Storage location: Rieth

Condition: used, Year of construction: 2026, New demonstration machine! General technical specifications: Motor power: 5.5 kW (7.5 hp) Infeed table length: 1200 mm Planing width: 500 mm Table height: 850 mm Cutting depth: max. 8 mm Speed: 5000 rpm Outfeed table length: 1640 mm Weight: approx. 1200 - 1250 kg - Operation: Electric cutting depth adjustment with display; concave/convex joint adjustment with display - Fence: Adjustable up to 45° with scale, single-hand operation, and integrated auxiliary fence - Cutterhead guard: Bridge guard - Extraction: Extraction port Ø 160 mm, minimum extraction air volume: 24 m³/min at 20 m/s, vacuum 810 Pa - Tool: TERSA solid steel cutterhead Z4, Ø 125 mm - Feed: Console for mounting a feed device - Electrical equipment: Electronic soft start/stop brake; contact for controlling the extraction; motor protection switch and winding protection, undervoltage protection; lockable main switch, EMERGENCY STOP button; required voltage supply: 3 ~, 400 V, 50 Hz - Emission values: Emission sound pressure level at the workplace LpA according to EN ISO 11202 [dB(A)] - idle noise 77 / operating noise m, with extraction: 88 Bodpfxez Dbp Nj Amroln - Accessories: 1 pair of TERSA knives - standard 510 mm (installed), 1 grease gun with long-life grease, 1 internal hexagon wrench, 1 adjustable wrench, 1 tool for knife changes Special equipment: - Safety device SUVAMATIC - Spiral cutterhead Xplane with 3 spiral knife rows (26 domed carbide knives per row; 2 counter knives), delivery including full knife set and a T-key Torx T20; cutterhead speed 6,000 rpm included. The emission sound pressure level LpA is reduced by 8 dB(A) during machining. - Control panel combined and moves with the fence. The optional control panel offers maximum ease of use and overview, as the controls move with the smooth-running fence; the ON/OFF button for the cutterhead, the EMERGENCY STOP button, the electric cutting depth adjustment with digital display, and the electronic concave/convex joint display are within easy reach and in the best viewing position. Location: Rieth

Condition: used, Year of construction: 2026, New exhibition machine! General technical features: Planing width: max. 630 mm Planing height: 2.8 - 300 mm Maximum planing removal: 12 mm Workpiece length min.: 270 mm Weight: approx. 1,200 - 1,400 kg Table length: 1,260 mm Speed: 5,000 rpm - Operation: 1-axis control for planing dimension, max. 99 values can be stored, 49 of which can be used for a freely programmable planing sequence; buttons for manual quick and fine adjustment of the planing thickness according to digital display, push buttons for starting and stopping the cutterhead, integrated operating hour counter - Cutterhead: Tersa full steel cutterhead with Z 4 - Thickness table: Electric thickness table adjustment with fine adjustment, feed rate 10 mm/s, mounted on 4 support spindles for tilt stability, table surface finely planed - Feed: 2 speeds 6 / 12 m/min - Extraction: Hinged, split hood with chip extraction connection Ø 160 mm, can be connected on the left / right (in special cases on both sides); minimum extraction air volume: 24 m³/min at 20 m/s, negative pressure 1,050 Pa Planing width: split hood with chip extraction connection - Maintenance device: Central lubrication strip for oil lubrication points; lubrication of bearings / cutterhead via grease fittings Accessories: 1 grease gun, filled with long-life grease 1 oil can 1 adjustable wrench 1 tool for cutter replacement 1 pair of blank cutters 640 mm 2 pairs of TERSA reversible cutters 640 mm CV - Electrical equipment: Electronic soft start/brake device; contact for controlling the extraction; motor circuit breaker and winding protection, undervoltage protection; lockable main switch, 2 EMERGENCY STOP buttons (infeed / outfeed); required voltage supply: 3 ~, 400 V - 50Hz - Emission values: Emission sound pressure level at the workplace LpA according to DIN EN ISO 11202 [dB(A)] Idling noise (without extraction) P1 65 Working noise (with extraction) P1 77 Idling noise (without extraction) P2 65 Working noise (with extraction) P2 77 Sound power level LWA according to DIN EN ISO 3746 [dB(A)] Idling noise (without extraction) 84 Working noise (with extraction) 90 - Dust emission DGUV test "tested for wood dust" according to DGUV 209-044 / BGI 739-1 Special equipment: -Drive power 7.5 kW (10 hp) -2nd rubber feed roller, ø 85 mm, complete -Thickness table extension, foldable, 630 x 450 mm -Special speed 6,000 rpm Location: Rieth Blsdpfx Amez A Hhuerjn

Condition: excellent (used), Year of construction: 2024, functionality: fully functional, 1x Professional high-volume shredder from Ideal, model: 4606 CC, security level: P-5 - with oiler. Used only a few times! In very good, fully functional condition, manufactured in 2024. Blodpfx Aszz R E Domrjn Price quoted net, plus VAT. Shipping possible upon request, subject to an additional charge.

Condition: used, Price: On request Shredder Bsdpfsz Ia Ncjx Amreln Reinbold AZR 800 Hopper opening: 800×1000 mm Hopper volume: 0.9 m³ Rotor: 252 mm Rotor speed: 90 RPM Motor power: 18.5 kW Tools: 20 Air velocity: 28 m/sec Total dimensions: 2250×1350×1650 mm, Weight: 1500 kg - Documentation available: Yes - CE certificate present: No Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, overall weight: 3,500 kg, type of input current: three-phase, empty load weight: 3,500 kg, working width: 1,400 mm, filling opening length: 1,400 mm, filling opening width: 700 mm, Untha 40 shredder This slow-speed shredder is ideal for shredding large items such as pallets, consumer electronics, televisions, solar panels, and bumpers. Blodpfxjzmzgps Amrsn Power: 2 x 18.5 kW Electrical cabinet: Siemens Chamber dimensions: 1400 x 700 mm Loading hopper included. Weight: approx. 3500 kg The machine is in perfect working order. Price available upon request. More photos and a video of the machine in operation can be provided upon request. Testing is possible. More information is available by phone.

Condition: refurbished (used), Year of construction: 1995, functionality: fully functional, power: 367.75 kW (500.00 HP), filling opening width: 700 mm, filling opening length: 1,200 mm, rotational speed (max.): 1,050 rpm, rotational speed (min.): 950 rpm, - Engine: Deutz 500 HP - Fill opening dimensions: 1200x700 mm - Rotor: 4 shafts and 40 stars - 950-1050 rpm Blsdpey I Uwasfx Amrjn - Throughput: 4-6 t/h - incl. new spare rotor & stars - completely overhauled & modernised

Condition: excellent (used), Catalog number 7687 TECHNICAL DATA - inlet width 540mm - inlet height 300mm - shaft width 630mm - shaft diameter 700mm - knife length 630mm - number of knives 2 pcs - screen dimensions 40x40mm - toothed pull shaft (bottom) - lower shaft motor 4kW - toothed pull shaft (top) Bljdpfx Ajzx Rngjmrjn - upper shaft motor 4kW - belt conveyor - length of feed belt 4720mm - width of feed belt 500mm - main motor 75kW - auto-reverse (adjustable) - overall machine dimensions (L/W/H) 3100x2000x1830mm - overall feeder dimensions (L/W/H) 4800x780x980mm - weight approximately 5000kg ADVANTAGES – German production – auto-reverse – used shredder, very good condition Net price: 120900 PLN Net price: 28116 EUR, depending on the exchange rate of 4.30 EUR (Prices are subject to change due to higher fluctuations)

Condition: as good as new (ex-display), Year of construction: 2025, operating hours: 1 h, Compact Shredder typ PYTHON-XL 1600, with 15 KW electricmotor, 400V 50Hz• • Electric motorreductor 15KW, 400V, 3phs, 50Hz 40% MORE torque compare PYTHON 1600 Standard Bsdovx Hkzjpfx Amrjln • Opening 1600 x 1000 mm • Main dimensions L 2700 x B 1400 x H 2600mm • Discharge opening 400x 100mm • Height discharge opening ca 1000mm • Electrical control box with INVERTER, main switch, selector switch on / off switch and emergency stop • Easily moved either with forklift or by means of lifting eyes • Weight approx. 2700 kg • Comprehensive machine manual • Finishing in RAL 3002 and RAL 7022 • (Subject to technical changes) • CE certified and "Made in Holland"

Condition: excellent (used), Catalogue number 6825 TECHNICAL DATA - Loading hopper dimensions (L/W): 900x630 mm - Rotor working width: 540 mm - Motor: 7.5 kW - Sieve diameter: 20 mm - Knife size: 40x40 mm - Number of knives: 15 pcs - Auto-reverse - Pressing drawer - Dimensions (L/W/H): 2060x980x1580 mm - Weight: 1008 kg ADVANTAGES – German-made – Not repainted – Very good condition – Used shredder Net price: 31,900 PLN Net price: 7,590 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (In the case of significant exchange rate fluctuations, the price may change) Blsdpfeztat Iex Amrsn

Condition: used, Year of construction: 2025, operating hours: 650 h, functionality: fully functional, overall weight: 27,000 kg, total length: 10,030 mm, total height: 3,675 mm, total width: 2,540 mm, rotor length: 3,000 mm, power: 405 kW (550.65 HP), ejection height: 4,030 mm, For sale is a PRONAR MRW 1.300 single-shaft pre-shredder (mobile slow-speed shredder) in very good condition. Similar design to the legendary DW-3060 "Buffalo". Bledpfx Amezrd Tiorsn We are very satisfied with the machine, which is in top condition and has only a few operating hours. The reason for the sale is solely that the input material for the company has changed, and therefore a change to a different (chipping) shredding technology is necessary. The machine is regularly used and can be inspected upon request! Diesel engine Volvo Penta 405kW/550 hp, Stage 5 Rotor with 42 bolted tools; length 3000 mm 3-axle chassis with 27 tons; approved for up to 80 km/h 2 screening baskets Overband magnet Long discharge conveyor; discharge height 4030 mm Central lubrication Radio remote control Hopper volume 6.4 m³ / hopper dimensions 3650x2200 / hopper discharge height 2870 mm Direct sale by Hannes Schirnhofer - Schirnhofer wood chip production - Flattendorf, Styria

Condition: used, Year of construction: 1999, Shredder Nazzareno K700 Serial number: 97013 Year of manufacture: 2007 Motor power: 18.5 kW Opening: 740x1400 mm Rotor length: 750 mm Screen diameter: 10 mm Includes feeding conveyor Transport dimensions: 3600×1350×1900 mm (L×W×H), Weight: 3500 kg Bljdpfswh Na Ajx Amrjn - Year: 1999 - Documentation available: No - CE certificate present: No - Serial number: 97013 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: excellent (used), CATALOGUE NUMBER 7611 Technical specifications: - inlet dimensions: 460x180mm - outlet diameter: 300mm - roller width: 550mm - roller diameter: 350mm - number of blades: 10 pcs - blades arranged in 2 rows - automatic reversing - blade setting device - screen diameter: 30mm - top and bottom conveyor belt - lower drive roller - length of the feed conveyor belt: 4400mm - main motor: 37kW - top feed motor: 1.5kW - bottom feed motor: 2.2kW - dimensions (L/W/H): 6100x1150x1000mm - weight: approximately 3500kg ADVANTAGES - Made in Germany - Automatic reversing - Top and bottom conveyor belt - Blade setting device - Very good condition - Used shredder Net price: 98,900 PLN Net price: 23,000 EUR Net price calculated based on an exchange rate of 4.30 PLN/EUR Bodpjzruibsfx Amrjln (the price may be subject to change in the event of significant exchange rate fluctuations)

Condition: excellent (used), functionality: fully functional, overall weight: 12,000 kg, Untha RS 100-150 kW. Engines: 2 x 75 kW. The machine has undergone a complete overhaul. New blades, bearings, seals, and electrical controls. Fully functional. Blodpfx Aez Dw Sysmrsn Equipment: Perforated screen. Electrical cabinet. Base frame. More technical information and price available upon request.

Condition: excellent (used), CATALOGUE NUMBER 6631 TECHNICAL DATA - Hopper inlet: 285x305mm - Motor: 7.35kW - Number of blades: 3 + 2 counter-blades - Blade dimensions: 300x75mm - Sieve (2 types): 10mm, 8mm - Diameter of suction outlet: 100mm - Dimensions (L/W/H): 1070x900x1980mm - Weight: 613kg ADVANTAGES Bodpfx Amozr Iukoroln - Swedish production - Additional sieve - Very good condition - Used shredder Net price: 22900 PLN Net price: 5326 EUR Net price calculated based on an exchange rate of 4.30 PLN/EUR (The price may change in case of significant exchange rate fluctuations)

Condition: excellent (used), Catalog number: 7361 TECHNICAL DATA - inlet width: 400mm - inlet height: 180mm - shaft width: 430mm - shaft diameter: 430mm - blade length: 430mm - number of blades: 2 pcs - screen dimensions: 60x60mm - 2 geared drive rollers (bottom) - motor for bottom rollers: 1.8kW - 2 geared drive rollers (top) - motor for top rollers: 1.8kW - belt conveyor - length of conveyor belt: 2200mm - width of conveyor belt: 330mm - main motor: 22kW Bedpjztq N Tefx Amrjln - auto-reverse - reverse gear - overall dimensions (L/W/H): 4100x1350x1100mm - weight: 1800kg ADVANTAGES – German-made – auto-reverse (adjustable) – reverse gear – used shredder, very good condition Net price: 66900 PLN Net price: 15558 EUR, depending on the exchange rate of 4.30 EUR (Prices may vary due to significant fluctuations)

Condition: excellent (used), Catalog number: 7268 TECHNICAL DATA - Dimensions of the loading hopper (top): length/width 1000x600mm - Dimensions of the loading hopper (bottom): length/width 650x600mm - Rotor width: 570mm - Motor: 15kW - Screen size: 16x12mm - Blade size: 40x70mm - Number of blades: 18 pcs - Auto-reverse - Presser drawer - Pump motor: 0.75kW - Dimensions: length/width/height 1900x1450x1450mm - Weight: 1040kg ADVANTAGES – Made in Germany – Unpainted – Very good condition – Used shredder Original photos Video of the machine in operation: youtube.com/watch?v=fSKMkMPlp-8 Net price: 29900 PLN Net price: 6953 EUR, depending on the exchange rate of 4.30 EUR Blodpjzxhh Dsfx Amrsn (Prices may vary due to significant exchange rate fluctuations)

Condition: excellent (used), Year of construction: 2001, CATALOGUE NUMBER: 7089 TECHNICAL DATA - Inlet of the loading hopper: 1020x1230mm - Working width of the rotor: 1020mm - Rotor diameter: 348mm - Main motor: 22kW, 400V, 50Hz - Pump motor: 0.75kW - Number of knives: 50 pcs - Knife dimensions: 35x35x20mm - Screen mesh: 12mm - Pressing drawer - Electric automatic reversing - Dimensions (L/W/H): 2000x1130x1530mm - Weight: 970kg ADVANTAGES – Automatic reversing Blodpfxeztau So Amren – Similar to WEIMA WL 10 – German made – Pressing drawer – Very good condition – Used shredder, DTR+CE documentation Net price: 99,900 PLN Net price: 23,233 EUR, depending on the exchange rate of 4.30 EUR (Prices may vary due to significant fluctuations)

Condition: excellent (used), functionality: fully functional, PALLET CRUSHING LINE : 2 Shredder 2 conveyors with magnetic drum for nail removal. Used only 200 hours AMIS shredder and 30 hours RUBUST shredder. Bedpfxjzy Nwpj Amroln Like a new and good price.

Condition: excellent (used), CATALOGUE NUMBER: 6943 TECHNICAL DATA - Loading hopper inlet: 1600x1500mm - Rotor working width: 1500mm - Main engine: 45kW - Pump engine: 5.5kW - Number of knives: 44 pcs - Knife dimensions: 50x50mm - Screen size: 59mm - Pressing drawer - Auto-reverse - Dimensions (L/W/H): 3430x2800x2850mm - Weight: approximately 9000kg Blodjzrna Hjpfx Amrjn ADVANTAGES - Made in France - New knives installed - Auto-reverse - Pressing drawer - Very good condition - Used shredder Net price: 129,900 PLN Net price: 30,209 EUR Net price calculated based on an exchange rate of 4.30 PLN/EUR (price may change in case of significant exchange rate fluctuations)

Condition: excellent (used), CATALOGUE NUMBER 7613 Technical data: - inlet width 650mm - inlet height 300mm - shaft width 660mm - blade length 660mm - number of blades 2 pcs - screen dimensions 90x100mm - 2 toothed pull shafts from below - lower shaft motor 3kW - 2 toothed pull shafts from above - upper shaft motor 3kW - belt conveyor Bjdpfx Aezadr Nemreln - belt conveyor length 2700mm - belt conveyor width 630mm - main motor 75kW - auto-reverse - reverse gear - overall dimensions (L/W/H) 5350x1300x1300mm - weight 4200kg ADVANTAGES – Made in Italy – Auto-reverse (adjustable) – Reverse gear – Used shredder, very good condition Net price: 149900 PLN Net price: 34860 EUR, depending on the exchange rate of 4.30 EUR (Prices may vary due to significant exchange rate fluctuations)

Condition: excellent (used), Catalog number: 7649 Blsdpozrm T Ssfx Amrsn TECHNICAL DATA inlet width: 900mm inlet height: 300mm shaft width: 1030mm shaft diameter: 700mm blade length: 1030mm number of blades: 3 pcs screen dimensions: 70x70mm 2 geared drive rollers at the bottom lower shaft motor: 7.5kW 2 geared drive rollers at the top upper shaft motor: 7.5kW belt conveyor chain conveyor/redler 5600mm + 10600mm, 2.2kW width of the feed belt: 800mm main motor: 90kW reverse gear overall machine dimensions (L/W/H): 3300x3100x1700mm base dimensions for the shredder: 3300x2080x1940mm feeder/redler dimensions (L/W/H): 5600x900x1000mm + 10600x1050x1600mm base dimensions for the feed belt: 5100x1300x2520mm total weight approximately: 16000kg ADVANTAGES – German production – chain conveyor (redler type) equipped with scrapers – reverse gear – DTR documentation – used shredder, very good condition Net price: 219900 PLN Net price: 51140 EUR, depending on the exchange rate of 4.30 EUR (Prices are subject to change due to significant fluctuations)